GPX Stereo System HMD8017DT User Manual

Home Music System  
HMD8017DT  
INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
1. Read Instructions - All the safety and  
operating instruction should be read before the  
product is operated.  
the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug  
fully into the outlet, try reversing the plug. If  
the plug should still fail to fit, contact your  
electrician to replace your obsolete outlet. Do  
not defeat the safety purpose of the polarizes  
plug.  
18. Overloading - Do not overload wall outlets,  
extension cords, or integral convenience  
receptacles as this can result in a risk of fire or  
electric shock.  
2. Retain Instructions - The safety and  
operating instruction should be retained for  
future reference.  
19. Object and Liquid Entry - Never push  
objects of any kind into this product through  
openings as they may touch dangerous voltage  
points or short-out parts that could result in a  
fire or electric shock. Never spill liquid of any  
kind on the product.  
3. Heed Warnings - All warning on the product  
and in the operating instructions should be  
adhered to.  
Alternate Warnings - This product is  
equipped with a three-wire grounding-type  
plug, a plug having a third (grounding) pin.  
This plug will only fit into a grounding-type  
power outlet. This is a safety feature. If you  
are unable to insert the plug into the outlet,  
contact your electrician to replace your  
obsolete outlet. Do not defeat the safety  
purpose of the grounding-type plug.  
4. Follow instructions - All operating and use  
instructions should be followed.  
20. Servicing - Do not attempt to service this  
product yourself as opening or removing  
covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to  
qualified service personnel.  
5. Cleaning - Unplug this product from the  
wall outlet before cleaning. Do not use liquid  
cleaners or aerosol cleaners. Clean only with a  
dry cloth.  
21. Damage Requiring Service - Unplug  
this product from the wall outlet and refer  
servicing to qualified service personnel under  
the following conditions:  
13. Power-Cord Protection - Power supply cords  
should be routed so that they are not likely to  
be walked on or pinched by items placed upon  
or against them, paying particular attention to  
cords at plugs, convenience receptacles, and  
point where they exit from the product.  
6. Attachments - Do not use attachments not  
recommended by the product manufacturer as  
they may cause hazards.  
7. Water and Moisture - Do not use this product  
near water - for example, near a bath tub, wash  
bowl, kitchen sink, or laundry tub; in a wet  
basement, or near a swimming pool, and the  
like. The apparatus shall not be exposed to  
dripping or splashing and that no objects filled  
with liquids, such as vases, shall be placed on  
apparatus.  
a) When the power-supply cord or plug is  
damaged,  
b) If liquid has been spilled, or objects have  
fallen into the product,  
14. Protective Attachment Plug - The product  
is equipped with an attachment plug having  
overload protection. This is a safety feature.  
See Instruction Manual for replacement or  
resetting of protective device. If replacement  
of the plug is required, be sure the service  
technician has used a replacement plug  
c) If the product has been exposed to rain or  
water,  
d) If the product does not operate normally  
by following the operating instructions.  
Adjust only those controls that are covered  
by the operating instructions as an improper  
adjustment of other controls may result in  
damage and will often require extensive work  
by a qualified technician to restore the product  
to its normal operation.  
8. Accessories - Do not place this product on  
an unstable cart, stand tripod, bracket, or  
table. The product may fall, causing serious  
injury to a child or adult, and serious damage  
to the product. Use only with a cart, stand,  
tripod, bracket, or table recommended by the  
manufacturer, or sold with the product. Any  
mounting of the product should follow the  
manufacturer’s instructions, and should use  
a mounting accessory recommended by the  
manufacturer.  
specified by the manufacturer that has the  
same overload protection as the original plug.  
15. Outdoor Antenna Grounding - If an  
outside antenna is connected to the receiver,  
be sure the antenna system is grounded  
so as to provide some protection against  
voltage surges and built-up static charges.  
Article 810 of the National Electrical Code,  
ANSI/NFPA 70, provides information with  
regard to proper grounding of the mast and  
supporting structure, grounding of the mast  
and supporting structure, grounding of the  
lead-in wire to an antenna-discharge unit, size  
of grounding conductors, location of antenna-  
discharge unit, connection to grounding  
electrodes, and requirements for the grounding  
electrode.  
e) If the product has been dropped or  
damaged in any way, and  
f) When the product exhibits a distinct change  
in performance - this indicates a need for  
service.  
9. A product and cart combination should be  
moved with care. Quick stops, excessive force,  
and uneven surfaces may cause the appliance  
and cart combination to overturn.  
22. Replacement Parts - When replacement parts  
are required, be sure the service technician  
has used replacement parts specified by the  
manufacturer or have the same characteristics  
as the original part. Unauthorized substitutions  
may result in fire, electric shock, or other  
hazards.  
See figure:  
See figure:  
23. Safety Check - Upon completion of any  
service or repairs to this product, ask the  
service technician to perform safety checks  
to determine that the product is in proper  
operating condition.  
10. Ventilation - Slots and openings in the cabinet  
are provided for ventilation and to ensure  
reliable operation of the product and to protect  
it from overheating, and these openings must  
not be blocked or covered. The openings  
should never be blocked by placing the  
product on a bed, sofa, rug, or other similar  
surface. This product should not be placed in a  
built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the  
manufacturer’s instruction have been adhered  
to.  
24. Wall or Ceiling Mounting - The product  
should be mounted to a wall or ceiling only as  
recommended by the manufacturer.  
25. Heat - The product should be situated away  
from heat sources such as radiators, heat  
registers, stoves, or other products (including  
amplifiers) that produce heat. Battery shall not  
be exposed to excessive heat such as sunshine,  
fire, or the like.  
16. Lightning - For added protection for this  
product during a lightning storm, or when it  
is left unattended and unused for long periods  
of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This  
will prevent damage to the product due to  
lightning and power-line surges.  
26. Main plug is used as disconnect device and  
it should remain readily operable during  
intended use. In order to disconnect the  
apparatus from the mains completely, the  
mains plug should be disconnected from the  
mains socket outlet completely.  
11. Power Sources - This product should be  
operated only from the type of power source  
indicated on the marking label. If you are not  
sure of the type of power supply to your home,  
consult your product dealer or local power  
company. For products intended to operate  
from battery power, or other sources, refer to  
the operating instruction.  
17. Power Lines - An outside antenna system  
should not be located in the vicinity of  
overhead power lines or other electric light or  
power circuits, or where it can fall into such  
power lines or circuits. When installing an  
outside antenna system, extreme care should  
be taken to keep from touching such power  
lines or circuits as contact with them might be  
fatal.  
27. Excessive sound pressure from earphones and  
headphones can cause hearing loss.  
12. Grounding or Polarization - This product  
may be equipped with a polarized alternating-  
current line plug (a plug having one blade  
wider than the other). This plug will fit into  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Quick Start Speaker Connection  
SPE  
R
A
KER  
S
L
Right Speaker  
Y
Pb  
Cb  
Pr  
Cr  
VID  
EO  
RE  
SE  
T
SU  
B
2
1
L
dio  
ch  
Au  
R
out  
Dig  
AX  
IAL  
out  
ita  
S
Vid  
l
V
IDE  
O
eo  
out  
Left Speaker  
SPE  
AKE  
RS  
R
L
L
R
Au  
x
i
a. To connect the unit to speakers (included), simply match the wires from each  
speaker with their designated connections.  
b. The Left Speaker will connect to the two ports under the letter L, while the Right  
Speaker connects to the two ports under the letter R.  
c. After matching the left and right speakers to the correct connection, match the wire  
colors to the same colored port.  
d. Press and hold the Speaker Cable Release buttons and insert the exposed section of  
speaker wire to connect the speakers to the unit.  
Quick Start Connection Guide  
Y
Y
b
Pr  
P
C
r
C
r
r
VID  
DE  
O
E
O
RRESES  
ETET  
SUSUBB  
2
2
1
1
L
L
chchAA  
ud  
F
i
o
i
o
o
o
R
R
u
t
ut  
CO  
C
A
ta
A
N
D
XI  
l
X
I
AL  
i
g
i
S
T
o
l
u
o
t
u
t
Vi  
die  
V
d
o
e
o
A
M
A
N
SPEAKER  
R
S
T
L
L
L
R
R
Au  
A
x
inin  
ux  
To Television  
From Unit  
YELLOW  
WHITE  
RED  
Connect to the video input  
connection.  
Connect to the video output  
connection.  
Connect to the left speaker  
audio output connection.  
Connect to the left speaker  
audio input connection.  
Connect to the right speaker  
audio output connection.  
Connect to the right speaker  
audio input connection.  
• Be sure to select the appropriate Video Input on the Television set.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Features  
1
2
13  
3
14  
15  
4
16  
17  
18  
19  
5
EJECT  
STOP  
BAND  
PLAY/PAUSE  
FUNCTION  
SKIP/SEARCH/TUNING  
VOLUME  
BASS LEVEL  
STANDBY  
Min  
Max  
20  
Min  
Max  
6
7
8
9
Y
Pb  
Pr  
VIDEO  
21  
22  
RESET  
SUB  
L
ch Audio out  
R
COAXIAL  
Digital out  
S
VIDEO  
2
1
Video out  
10  
SPEAKERS  
R
L
L
11  
12  
23  
R
Aux in  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Features Defined  
1
Drawer Loading CD/DVD Drive Plays DVD, DVD+R/RW, DVD-R/RW, CD, CD-R/RW, and JPEG  
discs.  
2
3
4
LCD Dislpay The Backlit LCD displays the time, functions, radio frequency, and output mode.  
STOP Press the STOP button to stop a CD, or DVD while playing.  
SKIP/SEARCH/TUNING Press the SKIP/SEARCH/TUNING buttons to skip forwards and back-  
wards through CD tracks, DVD chapters, JPEG CD images, or AM and FM radio frequencies. Press  
and hold the SKIP/SEARCH buttons to search forwards and backwards through individual CD tracks or  
DVD chapters.  
5
6
STANDBY Press the STANDBY button to turn the player off, and display the clock.  
Video Output Use the Video Output connection to send a composite video signal from the unit to a  
TV. (RCA cable required, included)  
7
Component Outputs Use the Component Outputs to send a video and audio signal from the unit to a  
TV and/or a home theater system.  
The Component Outputs must be connected to activate the progressive scan feature.  
Subwoofer Output Use the Subwoofer output to connect the unit to an external Subwoofer.  
8
9
RESET Using a paperclip or like object, press the RESET button to restore the unit to the factory’s  
default setting.  
10 FM ANT. Connection for the FM detachable antenna (included) to receive FM radio reception.  
11 AM ANT. Connection for the AM detachable antenna (included) to receive AM radio reception.  
12 Speaker Outputs Use the Speaker Outputs to connect the included external speakers.  
13 EJECT Press the EJECT button to open the Drawer Loading CD/DVD drive.  
14 BAND Press the BAND button to switch between AM and FM radio frequencies.  
15 PLAY/PAUSE Press the PLAY/PAUSE button to play or pause a CD, DVD, or JPEG CD.  
16 MODE Press the MODE button to switch between CD/DVD/JPEG, Tuner, and Aux.  
17 Infrared Receiver The Infrared Receiver acts as a receiver for the remote control.  
18 VOLUME With the power on, turn the VOLUME dial to increase or decrease the volume.  
19 BASS LEVEL With the power on, turn the BASS LEVEL dial to increase or decrease the bass.  
20 AC Cord Plug the attached AC Cord into a standard outlet to power the unit.  
21 S-Video Output Use the S-Video Output connection to send a higher quality video signal to the TV.  
(requires an S-Video cable, not included)  
22 Digital Audio Output Connect the Digital Audio Output connections to an external surround sound  
receiver to get true digital surround sound. (requires a coaxial cable, not included)  
23 Auxiliary Inputs (L/R) Connect the Auxiliary Input connections to an external audio device to send  
an audio signal from the device to the unit’s speakers. (RCA cable required, included)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Peripherals  
34  
35  
36  
24  
37  
38  
25  
26  
39  
40  
27  
28  
29  
41  
42  
30  
31  
32  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Peripherals Defined  
24 OSD The OSD (On Screen Display) shows the Time, Title, Chapter, Audio Language, Subtitle Setting, and Angle.  
25 VIDEO Press the Video button to switch between S-Video, YUV, or P-Scan (Progressive Scan).  
26 WIDE Press the WIDE button to switch the Aspect Ratio between 4:3 PS, 4:3 LB, or 16:9.  
The WIDE button will only work when the unit is in stop mode.  
27 SETUP Press the SETUP button to display the DVD Player’s setup menu.  
28 Navigation Controls The Navigation buttons (Up, Down, Right, Left) and the ENTER button are used for navigating  
the DVD Player’s internal menus and the DVD movie menus.  
29 ZOOM/ AUTO SCAN Press the ZOOM button consecutively to turn the zoom feature on and off, and switch  
between three different zoom settings. Press the AUTO SCAN button to automatically scan through the FM or AM  
radio frequencies to find the next available radio station.  
30 GOTO Press the GOTO button to quickly switch between chapters, titles, or tracks. Enter a time and instantly go to  
the selected time of a DVD movie, CD track, or JPEG photo CD.  
31 SLOW Press the SLOW button to activate and deactivate the Slow Motion feature while playing a DVD.  
32 REPEAT Press the REPEAT button to switch between Repeat Chapter, and Repeat Title for DVD or Repeat Single,  
and Repeat All for CD.  
33 MUTE Press the MUTE button to decrease the volume entirely on the unit.  
34 FUNCTION Press the FUNCTION button to cycle through the CD or DVD, Tuner, and Auxiliary Input.  
35 ANGLE/BAND The ANGLE feature works with special DVDs to adjust to alternate angles while watching. Press  
the BAND button to switch between AM and FM radio frequencies, when listening to the radio.  
36 PROG/MEM Press the PROG (Program) button to set a play order for the CD tracks or DVD chapters. Press the  
MEM (memory) button to save radio frequencies to the unit’s memory.  
There are 20 FM presets and 20 AM presets that stations can be saved to.  
37 CLK/DISP With the unit off, press the CLK button to activate the clock set mode. Press the DISP button to toggle  
through views on the LCD display.  
38 SUBTITLE Press the SUBTITLE button to turn the subtitles on and off, and to adjust between different subtitle  
languages.  
39 TITLE Press the TITLE button to see the Title Menu.  
40 MENU Press the MENU button to see the menu of the DVD disc in the player.  
41 AUDIO Press the AUDIO button to adjust the audio language during a DVD.  
42 PAUSE/STEP Press the PAUSE button to pause a CD, DVD, or JPEG CD. Press the STEP button to pause a  
DVD movie, and press it consecutively after the movie is paused to move forwards through the movie one frame at a  
time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
The Setup Menu  
OS
D
Lan  
uage  
g
Lang  
uage  
:
:
:
:
En
g
lis
h
Subtitl
e
Englis  
h
Au  
d
i  
o
Englis
h
Video  
DVD  
men  
u
Englis  
h
Audi  
o
Press the SETUP button to display the DVD Players setup menu.  
Mis  
c
OSDLanguage  
Subtitle
Audio
: English  
: English  
: English  
Language  
Video  
DVD menu  
English  
French  
Spanish  
Audio  
Misc  
Language  
Use the Language Section of the Setup Menu to change the language of the DVD Player’s interfaces as well  
as the DVD subtitles, audio, and menu. Subtitle, Audio and DVD Menu Languages are dependent on the  
DVD.  
OSD Language In the OSD (On Screen Display) Language Section choose from English, French, and  
Spanish as different OSD Languages  
Subtitle The Subtitle setting allows the user to turn subtitles on and change the language that the subtitles  
are written in. The Subtitle setting is dependent on the DVD.  
Audio Use the Audio setting to select the audio language of the DVD. The Audio setting is dependent on  
the DVD.  
DVD Menu Use the DVD Menu setting to select the written language on the DVD’s main menu. The  
DVD Menu setting is dependent on the DVD in the player.  
Video  
Aspect Ratio The ratio of the width of an image to its height.  
• 4:3PS The 4:3PS (Panscan) ratio shows the DVD movie in full screen, but the sides of the movie  
are cut away so that it fits on the TV screen  
• 4:3LB The 4:3LB (Letterbox) ratio shows the DVD movie in a original format, but with black  
bars at the top and bottom so that it fits on the TV screen.  
• 16:9 The 16:9 ratio shows the DVD movie in its widescreen format. Use this setting when view-  
ing a movie on a widescreen TV.  
TV System Select the TV system that’s consistent with the connected television.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
The Setup Menu  
Video Out  
• S-Video Select the S-Video option to use the S-Video Output as the unit’s primary video output.  
• YUV The YUV Setting is an advanced setting that takes advantage of the Component Video  
Outputs.  
• P-Scan The P-Scan (Progressive Scan) setting is an advanced setting that takes advantage of the  
Component Video Outputs, and produces a higher quality image output.  
Press the Video button on the remote control to cycle through S-Video, YUV, and P-Scan.  
Audio  
Digital Output  
• Off The Off setting is used when the Digital Audio Output is disconnected.  
• PCM The PCM setting increases the quality of sound. The Digital Audio Output must be con-  
nected to a surround sound receiver to fully take advantage of this feature.  
• RAW The RAW setting will automatically enable PCM in circumstances where it can be used,  
and automatically disable it when it cannot be used. Like PCM, this option also requires the Digi-  
tal Audio Output to be connected to a surround sound receiver.  
Misc  
Use Default Settings The Use Default Settings button will change all settings back to the original factory  
defaults.  
Screen Saver The Screen Saver should be turned on to avoid burn-in on the television.  
Operations  
Setting the Clock  
a. With the unit off, press the CLK/DISP button on the remote.  
b. Enter the time (hours:minutes:seconds) using the number pad on the remote control.  
c. Press the ENTER button on the remote control to set the designated time.  
Saving Radio Frequencies to the Unit’s Memory  
a. Connect the unit to a TV using the S-Video, Component, or Video Outputs.  
The unit must be connected to a TV in order to view and save preset stations.  
b. Press the FUNCTION button to set the unit to Radio mode.  
c. Press the BAND button to select FM or AM bands.  
d. Press the PREV/M- and NEXT/M+ buttons on the remote, or the SKIP/SEARCH buttons on the unit to  
select a preset to save a radio frequency to.  
e. Press the REW/TUN- and FWD/TUN+ buttons, on the remote, to tune the radio to the desired fre-  
quency.  
f. Press the PROG/MEM button on the remote control to save the selected radio frequency to the select  
preset.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Operations  
Programming a DVD  
a. Connect the unit to a TV using the Video Out, S-Video, or Component Connections.  
b. Insert a DVD into the unit.  
c. After the DVD is inserted and loaded, press the PROG button on the remote control to display the pro-  
gram menu.  
d. Use the Navigation Controls to move through the titles, chapters and options.  
e. Press the ENTER button on the remote control to select a title, then a chapter. Repeat steps d and e until  
the desired titles and chapters are programmed.  
• The title and chapter chosen will appear chronologically in the numbered columns on the right side of  
the screen. The numbered columns indicate the order in which the selected titles and chapters will play.  
f. Press the PLAY button on the remote control or unit to play the programmed tracks, or using the Naviga-  
tion Controls highlight the PLAY button and press ENTER to play the programmed tracks.  
Connecting other Digital Audio Devices  
a. Connect an audio device to the AUX inputs. (requires an RCA cable, included)  
b. Press the MODE button to set the unit to AUX mode, as indicated by the LCD Display.  
c. The audio device will now play through the speakers of the player.  
Connecting an External Subwoofer  
a. Connect an external subwoofer to the Subwoofer Output using a standard RCA cable.  
b. The unit will now play through the connected subwoofer, as well as the unit’s included speakers.  
Connecting an External Audio Product  
a. Connect an external audio product to the unit’s Audio Output connections using a standard RCA cord  
(included).  
b. The unit will now play through the connected external audio system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Service Information  
Address 2116 Carr Street, St. Louis MO, 63106  
Phone  
Fax  
Email  
1-314-621-2881  
1-314-588-1805  
To download this Instruction Man- Para descargar este manual de Pour télécharger ce manuel  
ual in English, Spanish, or French instrucción en inglés, español, o d’instruction en anglais, espagnol,  
visit the Support section at  
francés visite la sección de la ayu- ou le Français visitez la section de  
©
2007 DPI, Inc. All trademarks appearing herein are the property of their respective owners. All products subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grandstream Networks IP Phone GXP2010 User Manual
Grundig CRT Television LXW 68 9740 Dolby User Manual
Hamilton Beach Slow Cooker P92300 User Manual
Heatcraft Refrigeration Products Refrigerator H ENGM0408 User Manual
HP Hewlett Packard Personal Computer AT496AV 1 User Manual
HP Hewlett Packard Video Gaming Accessories 62003A 62048A User Manual
Humminbird Fish Finder 717 User Manual
Husqvarna Trimmer 326HDA User Manual
Ikelite Carrying Case 6090 User Manual
iLive Music Mixer AP7141 User Manual