Go Video VCR DDV9485 User Manual
DDV9485  
USER’S GUIDE  
DDV  
9485  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING:  
CAUTION:  
To reduce the risk of fire or electric shock, do not  
expose this appliance to rain or moisture. Do not open  
the cabinet; dangerous high voltage is present. Refer  
servicing to qualified personnel only. This video  
cassette recorder should only be used with 120V, 60Hz  
(standard U.S. household) current.  
To prevent fire, shock hazard, or annoying interference, use only the recommended accessories.  
To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle, or other  
outlet unless the blades can be fully inserted to prevent blade exposure.  
To reduce the risk of electric shock, do not remove the unit cover or back. There are no serviceable parts  
inside. Refer servicing to qualified personnel only.  
Federal law provides severe civil and criminal penal-  
ties for the unauthorized reproduction, distribution, or  
exhibition of copyrighted motion pictures and video-  
tapes. (Title 17, United States Code, Sections 501  
and 506).  
CUIDADO:  
Para prevenir incendio, riesgo de choque, o interferencia enfadosa, use solamente los accesorios  
recomendados.  
Para prevenir electrochoque, no use este enchufe (polarizado) con un cordón de extensión, toma de  
corriente, o cualquier otra toma a menos que los dientes puedan ser completamente insertados para  
prevenir exposición de los dientes.  
USER/INSTALLER CAUTION:  
Your authority to operate this FCC certified equipment  
could be voided if you make changes or modifications  
not expressly approved by the manufacturer, who is  
responsible for compliance with Part 15 FCC rules.  
Para reducir el riesgo de descarga eléctrica, no remueva la cubierta o la parte posterior del VCR. Dentro  
del VCR no hay partes que requieren servicio. Diríjase solamente a personal calificado cuando requiera  
servicio.  
ATTENTION:  
NOTE TO CATV SYSTEM INSTALLER:  
Pour éviter les incendis, risque de chocs, ou interférences fâcheuses, employer seulement les accessoires  
recommandés.  
This reminder is provided to call the CATV system  
installer’s attention to Article 820-40 of the National  
Electronic Code that provides guidelines for proper  
grounding and, in particular, specifies that the cable  
ground shall be connected to the grounding system of  
the building, as close to the point of cable entry as  
practical.  
Pour éviter les chocs électriques, ne pas employer cette prise (polarisée) avec une rallonge, une prise de  
courant ou une autre sortie de courant à moins que les lames peuvent être insérées à fond pour  
l’exposition des lames.  
Pour réduire les risques de chocs électriques, ne pas retirer le couvercle ou l'arrière du module. Il n'y a  
pas de pièce utilisable à l'intérieur. Ne faire effectuer l'entretien que par un personnel qualifié.  
This symbol is intended to alert the user to  
the presence of uninsulated dangerous  
voltage within the product’s enclosure that  
may be of sufficient magnitude to consti-  
tute risk of fire or electric shock.  
This symbol is intended to alert the user to  
the presence of important operating and  
maintenance instructions in the literature  
accompanying this product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Safety  
v
Important Safety Instructions .............................................................................................................................................. v  
1 - Basic Connections  
1
First Things First.................................................................................................................................................................. 1  
Connect Antenna/Basic Cable ............................................................................................................................................ 2  
2 - Initial Settings  
5
Auto Setup .......................................................................................................................................................................... 5  
Set Language Manually....................................................................................................................................................... 6  
Set Clock Manually ............................................................................................................................................................ 7  
Set Daylight Savings Time .................................................................................................................................................. 9  
Set Time Zone ................................................................................................................................................................... 10  
Set Auto Clock Set Channel .............................................................................................................................................. 11  
3 - The Dual-Deck System 13  
Remote Control Overview ................................................................................................................................................ 13  
Front Panel Overview ....................................................................................................................................................... 15  
Front Panel Inputs............................................................................................................................................................. 16  
Front Panel Display .......................................................................................................................................................... 17  
Front Panel Display Settings ............................................................................................................................................. 18  
Child Lock ........................................................................................................................................................................ 19  
Remote Eject..................................................................................................................................................................... 20  
Main Menu Tree ............................................................................................................................................................... 21  
Setup Menu Tree ............................................................................................................................................................... 22  
Menu Navigation - Remote Control.................................................................................................................................. 23  
Menu Navigation - Front Panel ........................................................................................................................................ 24  
Reset Factory Settings ....................................................................................................................................................... 25  
On-Screen Display Overview ........................................................................................................................................... 26  
On-Screen Display Elements ............................................................................................................................................ 27  
On-Screen Display (OSD) Settings ................................................................................................................................... 28  
Go-Video is a registered trademark of  
Sensory Science Corporation. Copy  
Tape, Video Sequencing, and Dual-  
Deck VCR are trademarks of Sensory  
Science Corporation. All other brand  
and product names are trademarks or  
registered trademarks of their  
respective companies.  
TABLE OF CONTENTS i  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 - Tuner & Channel List 29  
Tuner Band ....................................................................................................................................................................... 29  
Auto Channel Search ........................................................................................................................................................ 30  
Add Channel .................................................................................................................................................................... 31  
Remove Channel .............................................................................................................................................................. 32  
Show Weak Channels ....................................................................................................................................................... 33  
Tuner Audio ...................................................................................................................................................................... 34  
5 - Copy Features 37  
Basic Copying................................................................................................................................................................... 37  
EZ Copy ............................................................................................................................................................................ 38  
Copy Mode ....................................................................................................................................................................... 39  
Speed Matching ................................................................................................................................................................ 40  
Copy Audio Insert ............................................................................................................................................................. 41  
6 - Playback Features 43  
Basic Playback.................................................................................................................................................................. 43  
Special Playback Features ................................................................................................................................................ 44  
Tracking ............................................................................................................................................................................ 46  
Sequential/Loop Playback ................................................................................................................................................ 47  
Auto Play/Rewind ............................................................................................................................................................. 48  
Playback Audio Settings ................................................................................................................................................... 49  
7 - Recording Features 51  
Basic Recording ................................................................................................................................................................ 51  
Recording Options ........................................................................................................................................................... 52  
One-Touch Recording (OTR) ............................................................................................................................................ 53  
Record Speed ................................................................................................................................................................... 54  
Record Source .................................................................................................................................................................. 55  
Date/Time Stamp .............................................................................................................................................................. 56  
ii DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 - Timer Recording 57  
How to Set a Timer Recording .......................................................................................................................................... 57  
Timer Recording Errors ..................................................................................................................................................... 62  
9 - Editing Features 63  
8-Scene Editor .................................................................................................................................................................. 63  
Sync Editing ...................................................................................................................................................................... 66  
How to Cut Commercials with Skip Edit........................................................................................................................... 68  
On-Screen Titler ............................................................................................................................................................... 69  
Recording Titler Message .................................................................................................................................................. 70  
10 - Search/Index Features 71  
Overview .......................................................................................................................................................................... 71  
Placing Index Marks ......................................................................................................................................................... 72  
Index Scan ........................................................................................................................................................................ 73  
Index Search ..................................................................................................................................................................... 74  
Blank Search ..................................................................................................................................................................... 75  
Direct Time Search ........................................................................................................................................................... 76  
Return to 0:00:00 ............................................................................................................................................................. 77  
11 - Advanced Connections 79  
Cable Box Hookup ........................................................................................................................................................... 79  
Audio Connections ........................................................................................................................................................... 81  
TV Monitor Connections .................................................................................................................................................. 82  
Connecting Other Video Equipment ................................................................................................................................. 83  
Appendix A - Multibrand Remote 85  
Multi-Brand Remote Setup ............................................................................................................................................... 85  
Multi-Brand Remote Operation ........................................................................................................................................ 86  
TABLE OF CONTENTS iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B - Help 87  
Frequently Asked Questions (FAQs) ................................................................................................................................. 87  
Technical Specifications ................................................................................................................................................... 92  
Dual-Deck VCR Limited Warranty ................................................................................................................................... 93  
Index 95  
iv DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety  
Important Safety Instructions  
1.  
2.  
3.  
4.  
5.  
READ INSTRUCTIONS - All the safety and operating instructions should be read before the unit is operated.  
RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.  
HEED WARNINGS - All warnings on the unit and in the operating instructions should be adhered to.  
FOLLOW INSTRUCTIONS - All operating and maintenance instructions should be followed.  
CLEANING - Unplug this video unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a dry cloth for  
dusting cabinet.  
6.  
7.  
ATTACHMENTS - Do not use attachments not recommended by the video product manufacturer, as they may be hazardous.  
WATER & MOISTURE - Do not use this video unit near water—for example, near a bathtub, wash bowl, kitchen sink, laundry tub, in a  
wet basement, near a swimming pool or the like.  
8.  
ACCESSORIES - Do not place this video unit on an unstable cart, stand, tripod, bracket or table. The video unit may fall, causing serious  
injury to a child or adult, and serious damage to the unit. Use only with a cart, stand, tripod, bracket or table recommended by the  
manufacturer or sold with the video unit. Any mounting of the unit should follow the manufacturer’s instructions and should use a  
mounting accessory recommended by the manufacturer.  
8a. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the  
appliance and cart combination to overturn.  
9.  
VENTILATION - Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the video unit and to  
protect it from overheating. These openings must not be blocked or covered. Never place your VCR on a bed, sofa, rug or other similar  
surface, on or near a radiator or heat register. This video unit should not be placed in a built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.  
10. POWER SOURCES - This video unit should be operated only from the type of power source indicated on the marking label. If you are  
not sure of the type of power supply to your home consult your appliance dealer or local power company. For video units intended to be  
operated from battery power, or other sources, refer to the operating instructions.  
11. GROUNDING OR POLARIZATION - This video unit may be equipped with either a polarized 2-wire AC line plug (a plug having one  
blade wider than the other) or a 3-wire grounding plug having a third (grounding) pin.  
The 2-wire polarized plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully  
into the outlet try reversing the plug. If the plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the  
safety purpose of the polarized plug.  
12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items  
placed upon or against them, paying particular attention to cords of plugs, convenience receptacles, and the point where they exit from  
the unit.  
PORTABLE CART WARNING  
(Symbol provided by RETAC)  
13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the video unit, be sure the antenna or  
cable system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National  
Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection  
SAFETY v  
Download from Www.Somanuals.com. All Manuals Search And Download.  
to grounding electrodes, and requirements for the grounding electrode. See figure below.  
14. LIGHTNING - For added protection of this video unit during a lightning storm, or when it is left unattended and unused for long periods  
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video unit due to  
lightning and power line surges.  
15. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power  
circuits, where it can fall into such power lines or circuits. When installing an outside antenna system extreme care should be taken to  
keep from touching such power lines or circuits as contact with them might be fatal.  
16. OVERLOADING - Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.  
17. OBJECTS AND LIQUIDS - Never push objects  
of any kind into this video unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire  
or electric shock. Never spill liquids of any kind onto the unit. Should spillage occur, unplug unit and have it checked by a technician  
before use.  
18. SERVICING - Do not attempt to service this video unit yourself as opening or removing covers may expose you to a dangerous voltage or  
other hazards. Refer all servicing to qualified service personnel.  
19. DAMAGE REQUIRING SERVICE - Unplug this video unit from the wall outlet and refer servicing to qualified service personnel under the  
following conditions:  
a. When the power supply cord or plug is damaged.  
b. If any liquid has been spilled onto or objects have fallen into the video unit.  
c. If the video unit has been exposed to rain or water.  
d. If the video unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by  
the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a  
qualified technician to restore the video unit to its normal operation.  
e. If the video unit has been dropped or the cabinet has been damaged.  
f. When the video unit exhibits a distinct change in performance—this  
indicates a need for service.  
20. REPLACEMENT PARTS - When replacement parts are required, be sure  
the service technician has used replacement parts specified by the  
manufacturer or those having the same characteristics as the  
original part. Unauthorized substitutions may result in fire,  
electric shock or other hazards.  
21. SAFETY CHECK - Upon completion of any service or repairs to  
this video unit ask the service technician to perform safety  
checks to determine that the video unit is in safe operating  
order.  
22. HEAT - This video unit should be situated away from heat  
sources such as radiators, stoves, or other products (including  
amplifiers) that produce heat.  
vi DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 - Basic Connections  
First Things First  
1
Unpack your Dual-Deck VCR  
As you unpack, please check that the following  
items are included in your Dual-Deck VCR  
packing case:  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
• Dual-Deck VCR  
POWER  
P
Y
T
A
P
CO  
E
• User’s Guide  
SL  
O
W
VC  
R
1
4
7
2
3
6
9
T
R
K
AU  
T
O
TRK  
•
TV  
5
SHU  
T
T
L
E
•
C
•
AB  
L
E
8
DSS  
R
EPEAT  
F.ADV/ SKIP  
• Remote Control  
• 2 “AA” Batteries  
100+  
0
•
VO  
L
•
C
H
•
LC  
V
•
MUT  
E
S
E
A
R
C
H
/
V
I
E
W
I
N
D
E
T
V
X
•
D
I
S
P
L
A
C
E
Y
R
S
C
E
N
E
E
R
C
L
E
A
R
M
T
I
T
E
S
C
L
K
P
/
L
C
T
S
/
R
P
S
T
I
TL  
E
0
R
0
0
E
0
T
9
A
N
E
•
MENU  
/
• 1 RF (Radio Frequency) Antenna Cable  
• Read Me First/Quick Reference Guide  
• Warranty/Registration Card  
DEC  
K1  
DEC  
K2  
Insert Remote Control Batteries  
2
Remove the battery cover by pushing down and  
sliding the cover in the direction of the arrow.  
Insert 2 “AA” batteries as shown, paying  
attention to the correct polarities (+/–). Replace  
the cover.  
BASIC CONNECTIONS 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect Antenna/Basic Cable  
IN  
LINE  
OUT  
Follow these steps only if you  
are using an indoor/outdoor  
antenna or basic cable. If you  
have a:  
• Cable Box  
• Stereo Receiver  
• TV Monitor  
(FROM ANT.)  
Connect Antenna to VCR  
1
From Antenna  
or Cable  
R
AUDIO  
L
Connect the RF antenna cable from your  
indoor/outdoor antenna or cable wall  
outlet to the IN (FROM ANT.) jack on the  
back panel of the VCR.  
OUT  
RF  
(TO TV)  
VIDEO  
CH  
3
4
• Third VCR  
• Laserdisc Player  
• DVD Player  
• Camcorder  
• Satellite Receiver  
• Video Game  
...or other advanced connection,  
please refer to Chapter 11.  
Connect VCR to TV  
IN  
LINE  
OUT  
2
(FROM ANT.)  
R
Connect the supplied RF cable from the  
OUT (TO TV) jack on the back panel of the  
VCR to your television’s ANTENNA IN  
jack.  
AUDIO  
L
OUT  
RF  
(TO TV)  
VIDEO  
CH  
To TV  
3
4
Set VCR Output Channel  
3
CH  
Set the channel switch on the back panel of  
the VCR to 3 or 4, whichever is not an  
active channel in your area.  
3
4
Plug In VCR  
4
Connect the VCR power cord to a standard  
120V/60Hz wall outlet.  
2
DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn On VCR  
5
Press the Power button on the remote control  
or on the VCR’s front panel.  
Power  
Turn On TV  
6
7
ON  
Press the power button on the TV.  
Tune TV to Channel 3 or 4  
CH3/4  
Be sure to use the same channel you used in  
Step 3.  
Basic Connection is Complete!  
LANGUAGE / LANGUE / IDIOMA  
8
1➔English  
2 : Français  
3 : Español  
The Language menu will appear on your  
television screen. Please proceed with Auto  
Setup in Chapter 2.  
Select = 1 - 3  
Choisir = 1 - 3  
Elegir = 1 - 3  
BASIC CONNECTIONS 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 - Initial Settings  
Auto Setup  
The first time you hook up and  
turn on your Dual-Deck VCR,  
it will run Auto Setup. First,  
you will be prompted to select  
the on-screen language, then  
the Dual-Deck VCR will  
automatically search for  
channels and set the VCR’s  
internal clock.  
Set Language  
LANGUAGE / LANGUE / IDIOMA  
1
2
1➔English  
2 : Français  
3 : Español  
Press 1, 2, or 3 to select English, French, or Spanish. To  
change the language at any other time, see page 6.  
Select = 1 - 3  
Choisir = 1 - 3  
Elegir = 1 - 3  
Run Auto Setup  
As soon as you set the language, the VCR will automati-  
cally perform the following steps:  
• Auto Channel Search — Automatically detects  
whether you have an antenna or cable, then searches  
for all channels in your area. If Auto Setup is unable to  
search for channels in your area, you may do so at  
any time; see page 30.  
Searching for Channels  
And Setting Clock  
• Auto Time Set — Sets the VCR’s internal clock. If Auto  
Setup is unable to find a clock set channel in your  
area, you can set the clock manually; see page 7.  
Please Wait . . .  
This procedure may take a few minutes to complete, at  
which point it will tune the VCR to the lowest channel  
found.  
Auto Setup is Complete!  
Proceed to Chapter 3 for an overview of the Dual-Deck  
System.  
INITIAL SETTINGS 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Language Manually  
If you want to change the on-  
screen language at any time,  
follow these steps.  
MAIN MENU  
Open “Main Menu”  
1
2
3
4
5
6
EZ Copy  
Off  
Off  
➔
:
:
:
:
1
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
Press the menu button on the remote  
control.  
:
/
To Move  
MENU to Quit  
To Select  
➔
Hold MENU Key For Setup  
Select On-Screen Language  
2
MAIN MENU  
1
2
3
4
5
6
:
:
:
:
:
EZ Copy  
Off  
Off  
Press 6 repeatedly to cycle among English,  
French, and Spanish. As you do this, the  
entire Main Menu will be translated into  
English, French or Spanish.  
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
To Move  
MENU to Quit  
Hold MENU Key For Setup  
➔
/
To Select  
➔
English  
MENU PRINCIPAL  
Copie facile  
Contrôle d'enfant  
Enreg. programmable  
Montage de 8 scènes  
Titres à l'écran  
1
2
3
4
5
6
:
:
:
:
:
non  
non  
Language/Langue/Idioma  
➔
/
= Choisir  
MENU = Fin  
MENU pendant 3s = Réglages  
= Changer  
➔
French  
MENU PRINCIPAL  
Copiar fácilmente  
Seguridad de niños  
Grabación programada  
Montaje de 8 escenas  
Títulos de crédito  
1
2
3
4
5
6
:
:
:
:
:
no  
no  
Language/Langue/Idioma  
➔
/
= Cambiar  
MENU = Salir  
MENU por seg. = Ajustes  
➔
= Elegir  
3
Spanish  
6
DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Clock Manually  
If Auto Clock Set is not avail-  
able in your area, follow these  
steps to set the clock manually.  
If Auto Clock Set has set the  
time incorrectly, try adjusting  
Daylight Savings Time (page 9)  
and Time Zone (page 10)  
before setting the clock  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
1
2
3
4
➔
:
:
:
:
Press and hold the Menu button for 3  
seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Set Clock Menu”  
Press 1.  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
manually.  
On  
Auto  
Auto  
Auto  
➔
Clock Set Channel  
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
Turn Off “Auto Clock Set”  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
On  
Auto  
Auto  
Auto  
➔
Press the right arrow key once. “Set Clock”  
will replace “Time Zone” and “Clock Set  
Channel.”  
Clock Set Channel  
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
SET CLOCK MENU  
Choose “Set Clock”  
Auto Clock Set  
Daylight Savings  
Set Clock  
Off  
Auto  
➔
Press the down arrow key until “Set Clock”  
is selected, then press the right arrow key to  
select.  
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
INITIAL SETTINGS 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Y2K Compliant  
Set the Time  
5
Go-Video Inc. hereby certifies  
that this Dual-Deck VCR is  
fully compliant with the  
calendar year 2000. Note that  
the year 2000 is a leap year.  
Use the number keys or the up/down arrow  
keys to adjust the following items. To skip an  
item, press the right arrow key:  
• Set Month — Enter the month as a 2-digit  
number; i.e. August = “08”  
• Set Year — Enter the year as a 2-digit  
number; i.e. 1999 = “99”  
SET MONTH [1-12] : 08  
Aug 1998 12:25 PM  
Su Mo  
SET MONTH [01-12]  
SET YEAR [00-99]  
SET DAY [01-31]  
SET HOUR [01-12]  
SET MINUTE [00-59]  
SET AM/PM [1/2]  
• Set Day — Enter the day as a 2-digit  
number; i.e. the ninth = “09”  
Tu We  
Th  
Fr  
Sa  
1
2
9
16  
23  
30  
➔
3
10  
17  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
8
15  
22  
29  
• Set Hour — Enter the hour as a 2-digit  
number; i.e. 12:xx = “12”  
24  
31  
To Set  
MENU to Quit  
• Set Minute — Enter the minute as a 2-digit  
number; i.e. xx:25 = “25”  
• Set AM/PM — Press “1” for AM, “2” for  
PM  
Save Settings  
6
The Clock is set! Press the Menu button at  
any time to save and quit.  
8
DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Daylight Savings Time  
From the Set Clock Menu, you  
may also choose to manually set  
Daylight Savings, Time Zone, or  
Auto Clock Set channel.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open the “Setup Menu”  
1
2
3
4
1
2
3
4
5
➔
:
:
:
:
Press and hold the menu button for 3  
seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
Select “Set Clock Menu”  
On  
Auto  
Auto  
Auto  
➔
Clock Set Channel  
Press 1.  
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
Choose “Daylight Savings”  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
On  
Auto  
Auto  
Auto  
➔
Press the down arrow key until “Daylight  
Savings” is selected.  
Clock Set Channel  
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
Set “Daylight Savings”  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
On  
Auto  
Auto  
Auto  
Auto  
Off  
On  
➔
Press the right arrow key to select among:  
• Auto — Uses local channel info to  
determine Daylight Savings Time status.  
• Off — Turns off Daylight Savings perma-  
nently, i.e. the time never changes.  
• On — Enables Daylight Savings at 2:00  
AM on the first Sunday of April and  
disables it at 2:00 AM on the last Sunday  
in October.  
Clock Set Channel  
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
INITIAL SETTINGS 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Time Zone  
You can set your Time Zone  
manually to one of the six  
preset choices. Use this feature  
if Auto Clock Set has set the  
time incorrectly by detecting a  
nearby time zone. Note: If you  
are an Arizona resident,  
choose Mountain Standard  
Time and turn Daylight  
Savings Time off.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open the “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the menu button for 3 sec-  
onds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Set Clock Menu”  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
On  
Auto  
Auto  
Auto  
➔
Press 1 or press the Set Timer button.  
Clock Set Channel  
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
Select “Time Zone”  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
On  
Auto  
Auto  
Auto  
3
4
➔
Press the down arrow key until “Time Zone”  
is selected.  
Clock Set Channel  
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
Set “Time Zone”  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
Auto  
On  
Auto  
Auto  
Auto  
Eastern  
Central  
Mountain  
Pacific  
Alaska  
Hawaii  
➔
Press the right arrow key to select among:  
• Auto — Sets Time Zone automatically  
• Eastern — Eastern Standard Time  
• Central — Central Standard Time  
• Mountain — Mountain Standard Time  
• Pacific — Pacific Standard Time  
• Alaska — Alaska Standard Time  
• Hawaii — Hawaii Standard Time  
Clock Set Channel  
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
10 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Auto Clock Set Channel  
If you know a station in your  
local area that broadcasts time  
information, you can set it  
manually. For example, your  
local PBS station usually will  
transmit the time and date. Use  
this feature only if Auto Clock  
Set has set the time incorrectly.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open the “Setup Menu”  
Press and hold the menu button for 3  
seconds.  
1
2
3
4
5
➔
:
:
:
:
1
2
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Set Clock Menu”  
Press 1.  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
On  
Auto  
Auto  
Auto  
➔
Clock Set Channel  
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
Select “Clock Set Channel”  
Press the down arrow key until “Clock Set  
Channel” is selected.  
3
4
On  
Auto  
Auto  
Auto  
Clock Set Channel  
➔
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
Set “Clock Set Channel”  
Press the right arrow key repeatedly to select  
among:  
• Auto — Automatically searches for  
channels broadcasting the time via XDS  
(Extended Data Services)  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
On  
Auto  
Auto  
Auto  
Auto  
Ch ##  
Aux  
Clock Set Channel  
➔
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
• Ch ## — Allow you to manually set a  
channel to receive XDS information  
• Aux — allows the clock to be set from  
another AV (Audio/Video) device at-  
tached to your VCR’s line inputs  
INITIAL SETTINGS 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 - The Dual-Deck System  
Remote Control Overview  
Copy Tape — Copies the tape in Deck 1 to the  
tape in Deck 2.  
*Power — Turns the VCR on and off. Note:  
Power will come on automatically when you  
insert a videotape.  
VCR — Sets the remote to operate your VCR.  
TV — Sets the remote control to operate your  
television. To program the remote, see Appen-  
dix A.  
Slow +/– — In Play mode, plays the tape at  
varying slow motion speeds.  
T
Y
P
A
POWER  
P
E
CO  
*0-9 — Selects channels directly. In the Menu  
system, selects menu items.  
SLOW  
2
VCR  
• TV  
Cable/DSS — Sets the remote to operate your  
Cable Box or Digital Satellite System (DSS).  
3
6
9
1
4
7
Auto/ Trk — In Play mode, allows you to  
manually adjust tracking. Press Auto to resume  
Auto Tracking.  
TRK  
TRK  
AUTO  
5
F.Adv/Skip — In Pause mode, advances the tape  
one frame for every press. In Play mode, jumps  
ahead one minute for every press (up to 5). In  
Copy mode, skip edits one minute for every  
press (up to 5).  
SHUTTLE  
8
• CABLE  
• DSS  
Shuttle (see page 45) — In Play mode,  
Shuttle gradually increases the cue speed  
from double-speed playback to picture search  
to jet search. Shuttle gradually slows down  
the tape, pauses, then goes into reverse picture  
search and reverse jet search.  
F.ADV/ SKIP  
0
REPEAT  
100+  
• CH  
• VOL  
• MUTE  
• LCV  
*Ch +/– — Changes channels up and down.  
*Vol +/– — Turns the sound up and down.  
*Mute — Turns audio on and off.  
Top Section  
*100+/Repeat — Selects cable channels 100  
and up; in Play mode, replays the last 30  
seconds of tape.  
*LCV (Last Channel Viewed) — Displays the  
last channel you were watching.  
*These keys can be used to operate your TV, VCR, Cable Box, or  
Satellite receiver; see Appendix A to program your remote control.  
THE DUAL-DECK SYSTEM 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV View — Switches the TV display among the  
Tuner, Deck 1, Deck 2, and Aux. This allows  
you to rotate through all your input sources—  
TV shows, videos, DVD players, etc.—at the  
touch of a button.  
Search/Index — From Stop, Play, F.Forward, or  
Rewind, opens the Search/Index Menu. While  
recording, places an Index Mark on the tape.  
Clear — Resets the Tape Counter to 0:00:00. In  
the menu system, it clears entries.  
Scene/Title — Marks the beginning and ending  
edit points of scenes in the 8-Scene Editor. Also  
press to record On-Screen Titles (see page 70).  
Display — Turns the On-Screen Display (tuner,  
audio, and deck status) on and off.  
CLK/CTR — Switches the Front Panel Display  
Rec — Starts recording if Deck 2 is selected.  
among clock, tape counter, and time remaining.  
Press twice to activate One-Touch Recording.  
Play/Still — Plays the tape. In Play or Record  
mode, pauses the tape in the source deck.  
SP/SLP• Enter — Sets the record speed to SP  
(Standard Play) or SLP (Super Long Play). SLP is  
three times longer than SP. Also performs the  
same function as the Enter key on your Cable  
Box remote.  
F.F. — When the tape is stopped, fast-forwards  
the tape. When the tape is playing, Visually  
searches the tape forward (Cue).  
Set Timer — Opens the Timer Recording  
menu.  
Menu — Opens the Main Menu. Press and hold  
for three seconds to open the Setup Menu  
Rew — When the tape is stopped, rewinds the  
tape. When the tape is playing, visually  
searches the tape in reverse (Review).  
Stop/Eject — Stops the tape in the active deck.  
Press twice to eject the tape.  
Deck2 — Sets Deck 2 as the active deck. All  
deck control buttons (Play, Rewind, etc.) will  
only affect Deck 2.  
Deck1 — Sets Deck 1 as the active deck. All  
deck control buttons (Play, Rewind, etc.) will  
only affect Deck 1.  
Deck Control Section  
14 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Overview  
Power — Turns the  
VCR on and off.  
Note: Power will  
come on automati-  
cally when you  
Pause — Pauses the  
tape in the active  
deck.  
Play — Plays the  
tape in the active  
deck. Press twice  
for double-speed  
playback. In menus,  
moves selection  
arrow up.  
Record — Starts  
recording if Deck 2  
is selected. Press  
repeatedly to  
activate One-Touch  
Recording.  
TV/VCR —  
Copy Tape —  
Copies the tape in  
Deck 1 to Deck 2.  
Switches between  
the TV’s tuner and  
the VCR’s tuner.  
insert a videotape.  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
TV/VCR  
Channel  
Video  
L
Audio  
R
Menu  
Stop/Eject — Stops  
the tape in the  
Rewind — In Stop  
mode, rewinds the  
tape. In Play mode,  
visually searches the visually searches the tape and Deck 2.  
tape in reverse  
F.Forward — In Stop  
mode, fast-forwards the  
tape. In Play mode,  
Deck Select —  
Switches control  
between Deck 1  
Menu — Opens the  
Main Menu. Press  
and hold for 3  
seconds to open the  
Setup Menu.  
Channel Up/Down  
— Changes chan-  
nels up and down.  
active deck. Press  
twice to eject the  
tape. In menus,  
moves selection  
arrow down.  
forward (Cue). In menus,  
selects and cycles  
(Review). In menus,  
backs up one menu. through menu items.  
THE DUAL-DECK SYSTEM 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Inputs  
Use the Front Panel Inputs for  
easy connection to a camcorder  
or video game. The front panel  
inputs are referred to as Aux  
throughout the menu system.  
Video Line Input — (Yellow)  
Use to connect the video  
signal from your external  
device with an RCA cable.  
Audio Right Input — (Red) Use  
to connect the right audio signal  
from your external device with  
an RCA cable.  
Hi-Fi  
Deck  
Copy Tape  
V9485  
TV/VCR  
Channel  
Video  
L Audio R  
Menu  
Audio Left Input — (White) Use  
to connect the left audio signal  
from your external device with  
an RCA cable. Connect monau-  
ral (mono) audio sources here.  
16 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Display  
Hi-Fi — Lights  
when a videotape  
is playing in Hi-Fi  
stereo sound.  
VCR — Lights to show you that the  
Dual-Deck is in VCR mode; i.e.  
what you see on screen is coming  
from the VCR and NOT the televi-  
sion, as set by the TV/VCR button  
on the front panel.  
Timer — Lights to  
show you that a  
Timer Recording is tape is being  
stored in memory.  
Blinks if there is a  
Timer Recording  
error.  
Copy — Lights to  
show you that a  
SAP — Lights when a  
Second Audio Program,  
usually a second lan-  
guage, is available for the  
current tuner channel.  
Stereo — Lights  
when the tuner  
channel is being  
broadcast in stereo.  
copied. Blinks if  
the Copy is  
Paused.  
Deck One — Lights to  
show you that Deck One  
is active.  
Deck Two — Lights to  
show you that Deck 2 is  
active.  
Deck One Tape Status — Tape Speed — (SP, SLP)  
00:00:00 — Shows you the current time,  
the tape counter, or the time remaining  
until the end of the tape in the active  
deck, as set by the CLK/CTR button. Also  
briefly displays the active deck function  
(Stop, Play, Rewind, etc.).  
Tape Speed — (SP, SLP) Deck Two Tape Status —  
Graphically shows you  
the status of the tape in  
Deck 1; i.e. Stop, Play,  
Rewind, etc.  
Shows you the current  
Playback Speed for  
Deck 1.  
Shows you the current  
Playback or Record  
Speed for Deck 2.  
Graphically shows you  
the status of the tape in  
Deck 2; i.e. Stop, Play,  
Rewind, etc.  
THE DUAL-DECK SYSTEM 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Display Settings  
You can set the Front Panel  
Display to dim at night so it  
doesn’t keep you awake.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
Press and hold the menu button for 3  
seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
DUAL-DECK FEATURES  
Remote Eject  
Select “Dual-Deck Features”  
1
2
3
4
5
6
7
On  
Normal  
Both  
Auto  
Auto  
On  
➔
:
:
:
:
2
3
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 4.  
:
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
Set “Panel Display”  
DUAL-DECK FEATURES  
Remote Eject  
Playback Mode  
Auto Play / Rewind  
4 ➔ Panel Display  
Screen Display  
Deck1 Hi-Fi  
Deck2 Hi-Fi  
1
2
3
:
:
:
On  
Normal  
Rew  
Auto  
Auto  
On  
Auto  
On  
Off  
Press 4 repeatedly to turn Panel Display to:  
• Auto — Dims automatically between  
10:00 PM and 6:00 AM  
5
6
7
:
:
:
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
• On — Makes Front Panel Display bright  
at all times.  
• Off — Disables Front Panel Display  
18 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Child Lock  
To prevent children from using  
the VCR when you are away,  
you can activate the Child  
Lock. This feature disables  
Auto Power On, Auto Play,  
and all front panel buttons.  
You will need the remote  
control to operate the VCR.  
MAIN MENU  
Open “Main Menu”  
1
2
3
4
5
6
EZ Copy  
Off  
Off  
➔
:
:
:
:
1
2
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
To Move  
MENU to Quit  
Hold MENU Key For Setup  
Press the Menu button on the remote  
control.  
:
/
To Select  
➔
MAIN MENU  
Set “Child Lock”  
1
2
3
4
5
6
:
➔
:
:
:
EZ Copy  
Off  
Off  
Off  
On  
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
To Move  
MENU to Quit  
Hold MENU Key For Setup  
Press 2 repeatedly to turn Child Lock on or  
off. With Child Lock set to “On”:  
• The VCR will not power on automatically  
when a tape is inserted.  
:
/
To Select  
➔
• Tapes will not play automatically when  
you insert them, regardless of the Auto  
Play setting (see page 48).  
• All front panel buttons are disabled.  
• You will still be able to use the remote  
control to operate all VCR functions.  
THE DUAL-DECK SYSTEM 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Eject  
Remote Eject allows you to eject  
tapes by pressing Stop on the  
remote control.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
1
2
3
➔
:
:
:
:
Press and hold the menu button for 3  
seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
DUAL-DECK FEATURES  
Remote Eject  
Select “Dual-Deck Features”  
1
2
3
4
5
6
7
On  
Normal  
Both  
Auto  
Auto  
On  
➔
:
:
:
:
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 4.  
:
:
Deck2 Hi-Fi  
____________________________________  
On  
/
= Move  
➔
= Sel  
MENU=Quit  
Set “Remote Eject”  
DUAL-DECK FEATURES  
Remote Eject  
On  
Off  
1
2
3
4
5
6
7
On  
Normal  
Rew  
Auto  
Auto  
On  
➔
:
:
:
:
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 1 repeatedly to turn Remote Eject on  
or off. The default setting is “On.”  
:
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
20 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Main Menu Tree  
The On-Screen Menu System is  
the control center of your Dual-  
Deck VCR. It is divided into two  
sections:  
Press the MENU Button and Release  
• Main Menu — for everyday  
functions, like EZ Copy, Child  
Lock, and Timer Recording.  
• Setup Menu — for seldom  
used “set and forget” options,  
like Set Clock, Copy/Record  
Settings and Tuner and Chan-  
nel List (see page 22).  
MAIN MENU  
1
2
3
4
5
6
EZ Copy  
Off  
Off  
On  
On  
➔
:
:
:
:
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
:
____________________________________  
/
To Move  
MENU to Quit  
➔
To Select  
3
4
5
SELECT EVENT [1-16]:01  
Scene  
Begin  
End  
:
:
:
- - - - - - - -  
0 : 00 : 00  
- : - - : - -  
1
2
3
4
10:30 PM  
On  
Ch10  
On  
Wednesdays  
➔
:
1H30M  
9:00 AM  
0H30M  
7:00 PM  
2H00M  
12:15 PM  
0H15M  
= Move  
Deck2 Auto  
Sun Dec/06  
Deck2 SP  
Line1  
On  
:
Mon-Fri  
1 - 8 To Select Scene  
EDIT For Begin And End  
CLEAR To Correct  
COPY TAPE To Make A Tape  
MENU To Quit  
Line2  
On  
Deck2 SLP  
Everyday  
:
Ch06  
➔ = Sel  
Deck2 Auto  
MENU=Quit  
/
THE DUAL-DECK SYSTEM 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup Menu Tree  
Press the MENU Button and Hold for 3 Seconds  
SETUP MENU  
1
2
3
4
5
Set Clock Menu  
➔
:
:
:
:
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
____________________________________  
= Move MENU=Quit  
➔ = Sel  
/
1
4
2
5
3
DUAL-DECK FEATURES  
Remote Eject  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
1
2
3
4
5
6
7
On  
Normal  
Rew  
Auto  
Auto  
On  
➔
:
:
:
:
On  
Auto  
Auto  
Auto  
➔
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Clock Set Channel  
:
:
Deck2 Hi-Fi  
On  
____________________________________  
To Move To Select  
MENU to Quit  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
/
➔
RESTORE FACTORY SETTINGS  
WARNING!  
COPY AND RECORD SETTINGS  
1
2
3
4
5
Copy Mode  
Auto  
➔
:
:
:
:
ALL SETTINGS  
WILL BE LOST  
1 ➔ Keep Timer Events And  
Clock Setting  
Clear Everything  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
On  
Off  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Timer  
Auto  
Auto  
No  
➔
2
:
____________________________________  
Press CLEAR to Reset  
____________________________________  
= Move = Sel MENU=Quit  
Press MENU to Quit  
/
➔
Tuner Audio  
____________________________________  
= Move = Sel MENU=Quit  
Stereo  
/
➔
22 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Navigation - Remote Control  
Use the following buttons to  
enter and navigate within the  
menu system.  
Menu  
Right Arrow  
Press and release to enter the  
Main Menu and adjust  
everyday functions. When  
you are in the menu system,  
press to save settings and  
exit.  
Selects and cycles through  
menu items.  
0–9  
Direct method of selecting  
and changing menu items  
(used in the examples  
Menu (3 seconds)  
Press and hold for 3 seconds  
to enter the Setup Menu and  
adjust “set and forget”  
functions.  
throughout this manual).  
Clear  
Up/Down Arrows  
Cancels certain selections in  
the menus.  
Moves up or down the list of  
menu items.  
Left Arrow  
When you are in the menu  
system, press to back up to  
the previous menu.  
THE DUAL-DECK SYSTEM 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Navigation - Front Panel  
The following front panel  
buttons can also be used to  
Menu  
Press and release to enter the Main Menu  
enter and navigate within the  
and adjust everyday functions. When you  
menu system.  
TV/VCR  
Channel  
Video  
Audio  
Menu  
are in the menu system, press to save  
settings and exit.  
Menu (3 seconds)  
Press and hold for 3 seconds to enter the  
Setup Menu and adjust “set and forget”  
functions.  
TV/VCR  
Channel  
Video  
Audio  
Menu  
Stop/Eject & Play  
Press Stop/Eject to move down and Play to  
move up the list of menu items.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Reco  
Reco  
Reco  
Rewind  
When you are in the menu system, press to  
back up to the previous menu.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
F.Forward  
Selects and cycles through menu items.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
24 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reset Factory Settings  
If you make changes to the  
Dual-Deck VCR default settings,  
you can always restore the  
original factory settings.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the Menu button on the remote  
control for 3 seconds.  
____________________________________  
= Move MENU=Quit  
➔ = Sel  
/
RESTORE FACTORY SETTINGS  
WARNING!  
ALL SETTINGS  
WILL BE LOST  
➔ Keep Timer Events And  
Clock Setting  
Select “Reset Factory Settings”  
Press 5.  
1
2
:
Clear Everything  
____________________________________  
Press CLEAR to Reset  
Press MENU to Quit  
Decide What to Reset  
RESTORE FACTORY SETTINGS  
WARNING!  
ALL SETTINGS  
WILL BE LOST  
➔ Keep Timer Events And  
Clock Setting  
Clear Everything  
____________________________________  
Press CLEAR to Reset  
3
4
Press 1 if you want to reset everything except  
the clock and any saved Timer Recordings.  
Press 2 if you want to clear all settings.  
1
2
:
Press MENU to Quit  
RESTORE FACTORY SETTINGS  
WARNING!  
ALL SETTINGS  
WILL BE LOST  
➔ Keep Timer Events And  
Clock Setting  
Clear Everything  
____________________________________  
Press CLEAR to Reset  
Restore Settings  
Press the Clear button to confirm your decision  
and restore factory settings.  
1
2
:
Press MENU to Quit  
THE DUAL-DECK SYSTEM 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Overview  
The On-Screen Display (OSD)  
Deck  
Still  
1
TV VIEW  
Ch # #  
Deck  
2
Bring up On-Screen Display  
Record  
- H : MM : SS  
SLP  
keeps you posted on the status  
of the Tuner, Decks, and Aux  
input. It also communicates  
important Copy, Timer Record,  
and Error messages.  
- H : MM : SS Stereo  
SP  
Press Display. The OSD will also appear  
whenever you activate a Deck function, i.e.  
Play a tape, change channels, etc. The OSD  
will turn off automatically after 5 seconds.  
Thu Jan 14,  
1999  
12 : 34 PM  
Change View  
Press TV View to change the OSD among the 4  
TV Views:  
• Tuner  
• Deck 1  
• Deck 2  
• Aux  
Tuner View  
Deck  
Still  
1
TV VIEW  
Ch # #  
Deck  
2
Record  
- H : MM : SS  
SLP  
- H : MM : SS Stereo  
SP  
Thu Jan 14,  
1999  
12 : 34 PM  
Deck  
Still  
- H : MM : SS  
SP  
1
TV VIEW  
Deck  
Deck  
2
Deck  
Still  
- H : MM : SS  
SP  
1
TV VIEW  
Aux  
Deck  
2
1
Record  
- H : MM : SS  
SLP  
Record  
- H : MM : SS  
SLP  
Source  
Ch # #  
Thu Jan 14,  
1999  
12 : 34 PM  
Deck 1 View  
Aux View  
Deck  
Still  
- H : MM : SS  
SP  
1
TV VIEW  
Deck  
2
Deck  
2
Record  
- H : MM : SS  
SLP  
Source  
Ch # #  
Deck 2 View  
26 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Elements  
TV View — Shows the source you  
are currently watching (Tuner,  
Deck 1, Deck 2, Aux). In Tuner  
View, shows the Channel Number.  
Deck Status — Shows current tape  
status in each deck: Stop, Play,  
Rew, FFwd, Eject, Cue, Review,  
Slow, Still, Pause, Rec, OTR,  
Index, ATR, or ERROR.  
Deck 1  
Still  
- H : MM : SS  
SP  
TV VIEW  
Deck 2  
Stereo  
Deck 2  
Record  
- H : MM : SS  
SLP  
Deck Counter Position—  
Shows the current tape position  
or time remaining as set by the  
Clk/Ctr button.  
Deck 2 Play/Record Speed—  
Shows current playback speed (SP,  
LP, SLP) or record speed (SP, SLP).  
Preparing Copy  
Deck 1 Play Speed— Shows current  
playback speed (SP, LP, SLP).  
Display Message — Provides  
feedback on your Dual-Deck,  
including Copy, Timer  
Recording, Sequential/Loop  
Play, and Error Messages.  
Audio Status — Shows the current  
audio source: stereo, mono, SAP,  
TV+SAP, Simul., or Mute.  
Source  
1999  
Ch # #  
Deck Record Source— In Deck 2  
View, the record source is dis-  
played at the bottom of the  
screen.  
Date and Time— In Tuner View,  
the Date and Time are displayed at  
the bottom of the screen.  
Thu Jan 14,  
12 : 34 PM  
THE DUAL-DECK SYSTEM 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display (OSD) Settings  
You can customize the OSD to  
show only Tuner information,  
only Deck information, or have  
it turned off at all times unless  
you press the Display key.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
Press and hold the Menu button on the  
remote control for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
DUAL-DECK FEATURES  
Remote Eject  
Select “Dual-Deck Features”  
1
2
3
4
5
6
7
On  
Normal  
Both  
Auto  
Auto  
On  
➔
:
:
:
:
2
3
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 4.  
:
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
Set “Screen Display”  
DUAL-DECK FEATURES  
Remote Eject  
1
2
3
4
5
6
7
:
:
:
:
On  
Normal  
Rew  
Auto  
Auto  
On  
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 5 repeatedly to turn Screen Display  
to:  
• Auto — Default setting. This will bring up  
the OSD automatically whenever a Deck  
function is activated (i.e., Play, Stop,  
Channel +/–, etc.)  
Auto  
Tuner  
Deck  
Off  
➔
:
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
• Tuner — Only Tuner information will be  
displayed.  
• Deck — Only Deck Status information  
will be displayed.  
• Off — The OSD will be off permanently  
unless you press the Display button.  
28 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 - Tuner & Channel List  
Tuner Band  
Broadcast television comes  
into your home in one of two  
ways: over the air via antenna,  
or through a cable via a local  
CATV (Community Antenna  
Television) provider or Satel-  
lite. The Tuner Band setting  
allows you to specify which  
source you are using. Use this  
setting only if Auto Setup  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the Menu button for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Tuner & Channel List”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Auto  
No  
➔
Press 3.  
detected the incorrect band,  
i.e. channels are coming in on  
the wrong channel numbers.  
Tuner Audio  
____________________________________  
Stereo  
/
= Move  
➔
= Sel  
MENU=Quit  
Set “Tuner Band “  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
3
Auto  
Antenna  
Cable  
Auto  
No  
➔
Press the right arrow repeatedly to switch the  
Tuner Band among:  
Tuner Audio  
____________________________________  
= Move = Sel MENU=Quit  
Stereo  
• Auto — Automatically detects Tuner Band.  
• Antenna — Indicates that you are using an  
indoor or outdoor VHF/UHF antenna.  
• Cable — Indicates that you are using CATV  
(Community Antenna Television), i.e. cable  
TV.  
/
➔
TUNER AND CHANNEL LIST 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Channel Search  
You can perform Auto Channel  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
1
2
3
4
5
➔
:
:
:
:
Search at any time to store  
only those channels which are  
active in your area.  
Press and hold the Menu button for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Tuner & Channel List”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
2
Auto  
No  
➔
Press 3.  
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
Select “Auto Channel Search”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
3
4
Auto  
No  
➔
Press the down arrow until Auto Channel  
Search is selected.  
Tuner Audio  
____________________________________  
= Move = Sel MENU=Quit  
Stereo  
/
➔
Ch03  
Start “Auto Channel Search”  
Press the right arrow to begin searching for all  
available channels in the selected Tuner Band.  
This procedure may take a few minutes to  
complete. When Auto Channel Search is  
finished, it will display the lowest channel  
found.  
30 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Add Channel  
Follow these steps to add a  
channel that was not detected  
during Auto Channel Search.  
Open “Setup Menu”  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
1
2
1
2
3
4
5
➔
:
:
:
:
Press and hold the Menu button for 3 sec-  
onds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Tuner & Channel List”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Auto  
No  
➔
Press 3.  
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Select “Add Channel”  
3
4
5
Auto  
No  
Press the down arrow until Add Channel is  
selected.  
➔
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
TUNER AND CHANNEL LIST  
CH 11  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Tune the Channel  
Auto  
No  
➔
Use the number keys (0-9) to enter the  
channel number, e.g. “1-1” for Channel 11.  
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
TUNER AND CHANNEL LIST  
CH 11  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Add the Channel  
Auto  
No  
➔
Press the right arrow to add the channel to  
your channel list. Repeat steps 4 and 5 to add  
more channels.  
Tuner Audio  
____________________________________  
= Move = Sel MENU=Quit  
Stereo  
/
➔
TUNER AND CHANNEL LIST 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remove Channel  
Follow these steps to remove a  
channel that was stored during  
Auto Channel Search.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
Press and hold the Menu button for 3  
seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Select “Tuner & Channel List”  
2
Auto  
No  
➔
Press 3.  
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
Select “Remove Channel”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
3
4
Auto  
No  
Press the down arrow until Remove Channel  
is selected.  
➔
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
Tune the Channel  
TUNER AND CHANNEL LIST  
CH 11  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Auto  
No  
Use the Ch +/– buttons or the number keys  
(0-9) to enter the channel number.  
➔
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
TUNER AND CHANNEL LIST  
CH 11  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Remove the Channel  
5
Auto  
No  
Press the right arrow to remove the selected  
channel from your channel list. Repeat steps  
4 and 5 to remove additional channels.  
➔
Tuner Audio  
____________________________________  
= Move = Sel MENU=Quit  
Stereo  
/
➔
32 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Show Weak Channels  
When you run Auto Channel  
Search, it will skip channels  
with weak signals, i.e. poor  
picture quality. With Show  
Weak Channels, you can add  
more channels to your list by  
lowering the cut-off point at  
which a picture is acceptable  
to view.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the Menu button for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Tuner & Channel List”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Auto  
No  
➔
Press 3.  
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
Select “Show Weak Channels”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
3
4
Auto  
No  
Press the down arrow until Show Weak  
Channels is selected.  
➔
Tuner Audio  
Stereo  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Set “Show Weak Channels”  
Auto  
No  
Press the right arrow repeatedly to set Show  
Weak Channels to Yes or No.  
No  
Yes  
➔
Tuner Audio  
____________________________________  
= Move = Sel MENU=Quit  
Stereo  
/
➔
TUNER AND CHANNEL LIST 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Audio  
Most television programs are  
broadcast in stereo. However,  
in certain circumstances, you  
may wish to set the Tuner  
Audio to mono, SAP or  
TV+SAP.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the Menu button for 3 sec-  
onds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Tuner & Channel List”  
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Auto  
No  
➔
Press 3.  
Tuner Audio  
____________________________________  
= Move = Sel MENU=Quit  
Stereo  
/
➔
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Select “Tuner Audio”  
3
4
Auto  
Press the down arrow until Tuner Audio is  
selected.  
No  
➔ Tuner Audio  
Stereo  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
TUNER AND CHANNEL LIST  
CH ##  
Tuner Band  
Auto Channel Search  
Add Channel  
Remove Channel  
Show Weak Channels  
Set “Tuner Audio”  
Auto  
Press the right arrow repeatedly to set Tuner  
Audio to:  
Stereo  
Mono  
SAP  
No  
➔ Tuner Audio  
Stereo  
____________________________________  
= Move = Sel MENU=Quit  
• Stereo — Two-channel Hi-Fi sound split  
into left and right channels. When a show is  
not broadcast in stereo, the sound reverts to  
Mono.  
TV + SAP  
/
➔
• Mono — Monaural, or single-channel,  
audio. Combines left and right audio  
signals. Use when connecting the VCR to a  
Mono output device, such as a monitor.  
34 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• SAP — Second Audio Program. Optional  
audio signal, often used to transmit a  
second language, news, or weather  
broadcasts. SAP will appear on the front  
panel display if it is available.  
• TV+SAP — Broadcasts Mono sound out  
of the left channel and SAP out of the  
right channel. This is useful if you want  
to listen to a second language with  
headphones while the primary language  
is played through the speakers.  
TUNER AND CHANNEL LIST 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 - Copy Features  
Basic Copying  
To copy a tape, simply put  
your source tape in Deck 1,  
your blank tape in Deck 2, and  
press Copy Tape. The tape in  
Deck 1 will begin copying to  
Deck 2.  
Insert Source Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
1
2
3
Power  
Copy Tape  
Put the tape you wish to copy in Deck 1 on  
the left side of the VCR.  
DDV9485  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
Insert Target Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Put your blank tape in Deck 2 on the right  
side of the VCR.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
Copy Your Tape  
Press the Copy Tape button on either the  
remote control or the front of the VCR. The  
tape in Deck 1 will begin copying to Deck 2.  
• To pause copying, press Copy Tape.  
• To resume copying, press Copy Tape  
again.  
Copy Tape  
• To stop copying, press Stop/Eject on both  
decks; see Sync Editing on page 66.  
COPY FEATURES 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EZ Copy  
EZ-Copy automates the entire  
copy process so you can copy  
an entire tape at the touch of a  
button. Just press the Copy  
Tape button, and the VCR will  
rewind both decks completely,  
copy the source tape to the  
target tape, rewind both decks  
again, and eject the tapes.  
MAIN MENU  
Open “Main Menu”  
1
2
3
4
5
6
EZ Copy  
Off  
Off  
➔
:
:
:
:
1
2
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
To Move  
MENU to Quit  
Hold MENU Key For Setup  
Press the Menu button on the remote  
control.  
:
/
To Select  
➔
Set “EZ Copy”  
MAIN MENU  
Off  
On  
1
2
3
4
5
6
EZ Copy  
Off  
Off  
➔
:
:
:
:
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
To Move  
MENU to Quit  
Hold MENU Key For Setup  
Press 1 repeatedly to turn EZ Copy on or  
off:  
:
/
To Select  
➔
• On — When Copy Tape is pressed, both  
decks will rewind, the tape in Deck 1  
will be copied to Deck 2, both decks will  
rewind again, and the tapes will be  
ejected.  
• Off — When Copy Tape is pressed, the  
tape in Deck 1 will begin copying to  
Deck 2 immediately from the current  
position of both decks. To stop copying,  
activate Deck 2 and press Stop. The tapes  
will not be rewound or ejected.  
Complete Program Record  
When EZ Copy is selected, the  
source tape begins to copy in  
SP; the VCR then calculates  
how much time is remaining  
on the target tape and adjusts  
the copy speed to SLP if  
necessary to copy the entire  
tape. If there is not enough  
room to copy the entire source  
tape, the VCR will copy in SLP  
until the end of the target tape  
is reached.  
Note: If the target tape ends before the  
source tape, neither tape will rewind to  
alert you that a problem occurred.  
38 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copy Mode  
There are two methods of  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
copying a tape from Deck 1 to  
Deck 2: HQ1 (High Quality 1)  
and HQ2 (High Quality 2).  
HQ1 is best if your source tape  
is recorded in SP. HQ2 is best  
if your source tape is recorded  
in LP or SLP. The Auto setting  
will make this choice for you.  
Press and hold the Menu button for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
COPY AND RECORD SETTINGS  
Copy Mode  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
Select “Copy/Record Settings”  
1
2
3
4
5
Auto  
On  
Off  
Timer  
Auto  
➔
:
:
:
:
Press 2.  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
COPY AND RECORD SETTINGS  
Auto  
HQ1  
HQ2  
Set “Copy Mode”  
1
2
3
4
5
Copy Mode  
Auto  
➔
:
:
:
:
3
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
On  
Off  
Press 1 repeatedly to set Copy Mode to:  
• Auto — Automatically sets the Copy Mode.  
• HQ1 — High Quality 1. Best if source tape is  
in SP.  
Timer  
Auto  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
• HQ2 — High Quality 2. Best if source tape is  
in LP or SLP.  
COPY FEATURES 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speed Matching  
Speed Matching automatically  
sets the Deck 2 record speed  
to be the same as the Deck 1  
playback speed when copying  
a tape. You will typically get  
the best results with this  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
Press and hold the Menu button for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
feature turned on. You must  
disable this feature to copy  
multiple movies onto a single  
Select “Copy/Record Settings”  
COPY AND RECORD SETTINGS  
1
2
3
4
5
Copy Mode  
Auto  
2
➔
:
:
:
:
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
On  
Off  
blank tape.  
Press 2.  
Timer  
Auto  
____________________________________  
/
= Move  
➔
= Sel  
MENU=Quit  
Set “Speed Matching”  
COPY AND RECORD SETTINGS  
3
1
2
3
4
5
:
➔
:
:
:
Copy Mode  
Auto  
On  
Off  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
On  
Off  
Press 2 repeatedly to turn Speed Matching on  
or off. Turn Speed Matching off only if you  
want to record two or three SP tapes onto one  
SLP tape. If you do this, you will need to set  
the Record Speed manually using the SP/SLP  
button on the remote control (see page 54).  
Timer  
Auto  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
40 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copy Audio Insert  
You can insert a new audio  
track, such as music or voice-  
overs, while you are copying a  
tape.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the Menu button for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
COPY AND RECORD SETTINGS  
Copy Mode  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
Select “Copy/Record Settings”  
1
2
3
4
5
Auto  
On  
Off  
Timer  
Auto  
➔
:
:
:
:
Press 2.  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
COPY AND RECORD SETTINGS  
Set “Copy Audio Insert”  
1
2
3
4
5
:
Copy Mode  
Auto  
3
:
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
On  
Off  
Off  
➔
:
Aux  
Timer  
Auto  
Press 3 repeatedly to set Copy Audio Insert to:  
• Off — Copy Audio Insert is disabled.  
• Aux — During Copy Tape session, audio  
will be recorded from a device connected to  
the front audio jacks.  
:
____________________________________  
= Move = Sel MENU=Quit  
/
➔
COPY FEATURES 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Connect Audio Source  
4
5
Power  
Copy Tape  
Connect the external audio source to the  
front audio inputs (Aux).  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
TV/VCR  
Channel  
Video  
L
Audio  
R
Menu  
Copy New Audio Track  
Insert tapes in both decks and press Copy  
Tape. At the same time, play the audio  
source.  
Notes:  
• The new audio signal replaces the tape’s  
original audio track.  
• If there is no audio source playing, the  
audio track will be blank.  
• Copy Audio Insert automatically reverts  
to off when the VCR is turned off.  
42 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 - Playback Features  
Basic Playback  
To play a videotape, simply  
insert it in either deck and  
press the Play button.  
Insert Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
1
2
Power  
Copy Tape  
Insert a standard VHS tape into Deck 1 or  
Deck 2.  
DDV9485  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
Play Tape  
Or  
Press Play on the remote control or the  
front panel.  
Rewind  
Play  
F. Forward  
Notes:  
• If Auto Play is on and the tape is missing  
the Record Safety Tab, the tape will begin  
to play automatically; see page 48.  
PLAYBACK FEATURES 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Playback Features  
While a tape is playing, you  
can enjoy a variety of special  
Freeze Frame  
From Play mode, press Play/Still to freeze a  
playback features, including  
Freeze, Skip, Slow Motion,  
and more. Press the Play  
button again to resume  
normal playback.  
single frame.  
Frame Advance  
From Still mode, press F.Adv/Skip to advance  
to the next frame.  
Slow Motion  
From Play mode, press Slow +/– for Slow  
Motion playback at variable speeds.  
Cue  
From Play mode, press F.Forward to cue at  
two speeds:  
• Picture Search — Press and release  
F.Forward to advance the tape at 5 times  
normal speed.  
• Jet Search — Press and hold F.Forward to  
advance the tape at 9 times normal speed.  
44 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Review  
From Play mode, press Rewind to review at  
two speeds:  
• Picture Search — Press and release  
Rewind to review the tape at 5 times  
normal speed.  
• Jet Search — Press and hold Rewind to  
review the tape at 9 times normal speed.  
Skip  
From Play mode, press F.Adv/Skip repeat-  
edly up to 5 times to cue ahead 1-5 min-  
utes.  
Repeat  
From Play mode, press Repeat to review the  
last 30 seconds of tape.  
Shuttle  
From Play mode, Shuttle gradually  
increases the cue speed from Double-Speed  
playback to Picture Search to Jet Search.  
Shuttle gradually slows down the tape,  
Pauses, then goes into Reverse Picture  
Search and Reverse Jet Search.  
PLAYBACK FEATURES 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tracking  
Adjusting the Tracking removes  
the lines that sometimes  
appear during playback  
because of slight differences in  
recording decks. Your Dual-  
Deck VCR will automatically  
align the recorded tracks with  
the playback heads to solve  
this problem. You may also set  
tracking manually.  
Adjust Tracking Manually  
1
2
Press the Tracking up/down arrow keys to  
move the white lines out of the picture.  
Resume Auto Tracking  
Deck  
ATR  
- H : MM : SS  
SP  
1
TV VIEW  
Deck  
Deck  
2
1
Record  
- H : MM : SS  
SLP  
While your tape is playing, press Auto to  
have the VCR adjust tracking automatically.  
ATR will flash on the on-screen display.  
Ch # #  
Source  
Ch # #  
46 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sequential/Loop Playback  
You can insert two tapes in  
your Dual-Deck VCR and have  
them play sequentially or in a  
continuous loop. For example,  
you may rent a movie that  
comes on two videotapes and  
watch them seamlessly one  
after the other. You may also  
set two sales or training tapes  
to loop continuously.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the menu button on the  
remote control for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
DUAL-DECK FEATURES  
Remote Eject  
Select “Dual-Deck Features”  
1
2
3
4
5
6
7
On  
Normal  
Both  
Auto  
Auto  
On  
➔
:
:
:
:
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 4.  
:
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
Set “Playback Mode”  
DUAL-DECK FEATURES  
Remote Eject  
3
Normal  
Seq  
Loop  
1
2
3
4
5
6
7
:
On  
Normal  
Both  
Auto  
Auto  
On  
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
➔
:
:
:
:
Press 2 repeatedly to set Playback Mode to:  
• Normal — Tapes play normally (default  
setting).  
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
• Seq (Sequential) — The tape in Deck 1  
will play to the end, then the tape in  
Deck 2 will play to the end.  
• Loop — The tape in Deck 1 will play to  
the end, then the tape in Deck 2 will play  
to the end. While Deck 2 is playing, the  
tape in Deck 1 will rewind to the begin-  
ning. This process will repeat continu-  
ously until you press Stop on the deck in  
Play.  
PLAYBACK FEATURES 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Play/Rewind  
Auto Play will play tapes  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
1
2
3
4
5
➔
:
:
:
:
without Record Safety Tabs  
automatically when they are  
inserted. Auto Rewind will  
rewind tapes when they reach  
the end during playback.  
Press and hold the menu button on the remote  
control for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
DUAL-DECK FEATURES  
Remote Eject  
Select “Dual-Deck Features”  
1
2
3
4
5
6
7
On  
Normal  
Both  
Auto  
Auto  
On  
➔
:
:
:
:
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 4.  
:
:
Deck2 Hi-Fi  
____________________________________  
On  
/
= Move  
➔
= Sel  
MENU=Quit  
Record Safety Tab  
Set “Auto Play/Rewind”  
DUAL-DECK FEATURES  
Remote Eject  
1
2
3
4
5
6
7
On  
Normal  
Both  
Auto  
Auto  
On  
➔
:
:
:
:
Both  
Play  
Rew  
Off  
Press 3 repeatedly to set Auto Play/Rewind to:  
• Both — Auto Play and Rewind will both be  
enabled.  
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
:
:
Deck2 Hi-Fi  
On  
• Play — Tapes without Record Safety Tabs  
will play automatically when they are  
inserted.  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
• Rew — Tapes will rewind automatically  
when they reach the end during playback.  
• Off — Auto Play and Rewind will both be  
disabled.  
48 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Audio Settings  
Your Dual-Deck VCR will  
playback tapes in Hi-Fi stereo  
sound. Occasionally, you  
may wish to turn Hi-Fi sound  
off and listen to the linear  
audio track only.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
3
Press and hold the menu button on the  
remote control for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
DUAL-DECK FEATURES  
Remote Eject  
Select “Dual-Deck Features”  
1
2
3
4
5
6
7
On  
Normal  
Both  
Auto  
Auto  
On  
➔
:
:
:
:
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 4.  
:
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
Set “Deck 1 Hi-Fi”  
DUAL-DECK FEATURES  
Remote Eject  
1
2
3
4
5
6
7
:
:
:
:
:
On  
Normal  
Both  
Auto  
Auto  
On  
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 6 repeatedly to turn Deck 1 Hi-Fi on  
or off. When set to off, you will hear the  
linear mono track when you play tapes in  
Deck 1.  
On  
Off  
➔
:
Deck2 Hi-Fi  
On  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
Set “Deck 2 Hi-Fi”  
DUAL-DECK FEATURES  
Remote Eject  
4
1
2
3
4
5
6
7
:
:
:
:
:
On  
Normal  
Both  
Auto  
Auto  
On  
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Press 7 repeatedly to turn Deck 2 Hi-Fi on  
or off. When set to off, you will hear the  
linear mono track when you play tapes in  
Deck 2.  
:
On  
Off  
Deck2 Hi-Fi  
On  
➔
____________________________________  
= Move = Sel MENU=Quit  
/
➔
PLAYBACK FEATURES 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 - Recording Features  
Basic Recording  
You can record your favorite  
TV shows at the touch of the  
Insert Tape  
1
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Record button. Be sure your  
videotape has a Record Safety  
Tab. If it is missing, you can  
cover the opening with a small  
piece of tape. Warning: Do not  
cover this opening unless you  
are sure you want to record  
over the tape.  
Insert a blank tape into Deck 2.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
Select a Channel to Record  
2
Use the 0–9 buttons or the Channel Up/  
Down arrow keys to select the desired  
channel.  
Or  
Record Safety Tab  
Start Recording  
3
Press the Record button. For options while  
a recording is in progress, see Record  
Options on the next page.  
Notes:  
• Be sure the TV is set to channel 3 or 4  
(whichever the switch is set to on the  
back of the VCR).  
• Make sure the TV/VCR button on the  
front panel is set to VCR (the VCR icon  
will appear on the front panel display).  
• Be sure the tape is long enough to record  
the entire program. To change the  
recording speed, see page 54.  
RECORDING FEATURES 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Options  
While a recording is in  
To Stop Recording...  
progress, you can watch a  
different channel, watch a  
videotape in the other deck, or  
add recording time in 30-  
minute increments.  
Press Stop.  
To Pause Recording...  
Press Play/Still. To resume recording, press  
Record.  
To Watch a Different Channel...  
Press the TV/VCR Button on the front panel to  
switch to TV mode (the VCR icon will disappear  
from the front panel display), then select a  
different channel using your TV’s tuner.  
DDV9485  
TV/VCR  
Channel  
Video  
L
Audio  
R
Menu  
To Watch Another Videotape...  
Insert a tape in the second deck and press Play.  
The TV View will change automatically.  
To Add Recording Time...  
See One-Touch Recording (OTR) on page 53.  
52 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
One-Touch Recording (OTR)  
OTR allows you to add  
recording time in 30-minute  
increments at the touch of a  
button.  
Start Recording  
1
2
Follow the instructions on page 51.  
Activate OTR  
Deck  
Play  
- 0:20:45  
SP  
1
TV VIEW  
Ch 12  
Stereo  
Deck  
2
OTR 0:30  
- 1:32:08  
SP  
While in Record mode, press Record again  
to activate One-Touch Recording. OTR  
0:30 will appear on the On-Screen Display  
and the VCR will record for exactly 30  
minutes.  
Thu Jan 14, 1999  
12 : 34 PM  
Deck  
Play  
- 0:20:45  
SP  
1
TV VIEW  
Ch 12  
Stereo  
Deck  
2
Add Recording Time  
While in OTR mode, press Record again to  
increase recording time in 30 minute  
increments up to 9 hours and 30 minutes.  
OTR 0:30  
- 1:32:08  
SP  
OTR 0:30  
OTR 1:00  
OTR 1:30  
OTR 2:00  
3
4
OTR 9:00  
OTR 9:30  
Thu Jan 14, 1999  
12 : 34 PM  
Deck  
Play  
- 0:20:45  
SP  
1
TV VIEW  
Ch 12  
Stereo  
Deck  
2
Activate Loop Record  
OTR LOOP  
- 1:32:08  
SP  
When you reach OTR 9:30, press Record  
again to enter Loop Record. Deck 2 will  
record over and over again in a continuous  
loop until you press Stop. This can be used  
for continuous recording of security  
cameras.  
Thu Jan 14, 1999  
12 : 34 PM  
Notes:  
• If you press Power during an OTR  
session, the Dual-Deck VCR will turn off  
automatically when the recording time  
has elapsed.  
• When the recording time has elapsed, the  
VCR will stop automatically.  
RECORDING FEATURES 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Record Speed  
You can adjust the speed at  
which your Dual-Deck VCR  
records, e.g. to fit more than 2  
hours of programming on a T-  
120 tape.  
Start Recording  
1
2
Follow the instructions on page 51.  
Set Record Speed  
Press the SP/SLP button on the remote  
control to switch the record speed between:  
• SP — Standard Play.  
• SLP — Super Long Play (3 times SP).  
Maximum Record Time  
Tape Length  
T-120  
SP (Standard Play)  
2 hrs  
SLP (Super Long Play)  
6 hrs  
8 hrs  
9 hrs  
T-160  
2 hrs 40 min  
3 hrs  
T-180  
54 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Record Source  
You can set the Dual-Deck  
VCR to record from the Tuner,  
Decks or Aux inputs. The Auto  
setting will record whatever is  
currently visible on-screen.  
SET MONTH [1-12] : 08  
Open “Setup Menu”  
Aug 1998  
Su Mo  
12:25 PM  
Fr  
1
2
Tu We  
Th  
Sa  
1
8
15  
22  
29  
Press and hold the Menu button for 3 seconds.  
2
9
16  
23  
30  
➔
3
10  
17  
24  
31  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
To Set  
MENU to Quit  
COPY AND RECORD SETTINGS  
Copy Mode  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
Select “Copy/Record Settings”  
1
Auto  
On  
Off  
Timer  
Auto  
➔
2
3
4
5
:
:
:
:
Press 2.  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
Set “Deck 2 Record Source”  
COPY AND RECORD SETTINGS  
3
1
2
3
4
5
:
:
:
:
Copy Mode  
Auto  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
On  
Off  
Press 5 repeatedly to set Deck 2 Rec Source to:  
• Auto — The current TV View (whatever you  
currently see on the screen).  
• Aux — Source connected to front line inputs.  
• Deck1 — Tape playing in Deck 1.  
Auto  
Aux  
Deck1  
Tuner  
Timer  
Auto  
➔
____________________________________  
= Move = Sel MENU=Quit  
/
➔
• Tuner — Current television program.  
RECORDING FEATURES 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Date/Time Stamp  
The Date/Time Stamp allows  
you to overlay the date, time,  
and record source at the start  
of, or continuously throughout,  
your recordings. You can use  
the stamp on all recordings or  
on timer recordings only. The  
stamp will not appear, how-  
ever, when you copy a tape.  
SETUP MENU  
Set Clock Menu  
Copy/Record Settings  
Tuner And Channel List  
Dual-Deck Features  
Reset Factory Settings  
Open “Setup Menu”  
1
2
3
4
5
➔
:
:
:
:
1
2
Press and hold the Menu button for 3 seconds.  
____________________________________  
/
= Move  
➔ = Sel  
MENU=Quit  
Select “Copy/Record Settings”  
COPY AND RECORD SETTINGS  
Copy Mode  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
1
2
3
4
5
Auto  
On  
Off  
Timer  
Auto  
➔
:
:
:
:
Press 2.  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
Set “Date/Time Stamp”  
COPY AND RECORD SETTINGS  
3
1
2
3
4
5
:
:
:
Copy Mode  
Auto  
Speed Matching  
Copy Audio Insert  
Date/Time Stamp  
Deck2 Rec Source  
On  
Off  
Timer  
Cont  
All  
Press 4 repeatedly to set Date/Time Stamp to:  
• Timer — The date, time, and record source  
will appear briefly at the start of all timer  
recordings only (default setting).  
Timer  
Auto  
➔
:
Off  
____________________________________  
= Move = Sel MENU=Quit  
/
➔
• Cont (Continuous) — The date, time, and  
record source will appear continuously over  
all recordings. The On-Screen Display and  
Menu system will be disabled if this setting  
is on. Press Stop on the recording deck to  
restore normal on-screen functions.  
• All — The date, time, and record source will  
appear briefly at the start of all recordings  
except copies.  
• Off — The Date/Time Stamp is disabled.  
56 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 - Timer Recording  
How to Set a Timer Recording  
Sometimes you may wish to  
record a television show when  
SELECT EVENT [1-16]:01  
Open ”Select Event Menu”  
Press the Set Timer button.  
1
2
3
4
10:30 PM  
1H30M  
On  
Ch10  
- - -  
Ch--  
- - -  
Ch--  
- - -  
Ch--  
= Sel  
Wednesdays  
Deck2 Auto  
- - - / - -  
Deck 2 - -  
- - - / - -  
Deck 2 - -  
- - - / - -  
Deck 2 - -  
MENU=Quit  
➔
:
1
- - : - - - -  
- H - - M  
- - : - - - -  
- H - - M  
- - : - - - -  
- H - - M  
= Move  
you’re not home. Or you may  
want to create a library of your  
favorite TV shows. The Timer  
Recording Feature allows you  
to set up to 16 events at a time  
up to 1 year in advance.  
:
:
Notes:  
/
➔
• If you haven’t set the clock, the Set Clock  
menu will appear. You must set it before  
you can program a Timer Recording (see  
page 7).  
• You can also access the Select Event  
Menu from the Main Menu. Press the  
Menu button to bring up the Main Menu;  
then press 3 to select Timer Recording.  
Or  
SET CLOCK MENU  
Auto Clock Set  
Daylight Savings  
Time Zone  
Clock Set Channel  
On  
Auto  
Auto  
Auto  
➔
____________________________________  
/
To Move  
MENU to Quit  
To Select  
➔
Choose Event Number  
Use the number keys to enter the next  
available event number (1–16) as a 2-digit  
number; i.e., for “1”, press “0-1”.  
SELECT EVENT [1-16]: 01  
01-16  
2
1
2
3
4
- - : - - - -  
- H - - M  
- - : - - - -  
- H - - M  
- - : - - - -  
- H - - M  
- - : - - - -  
- H - - M  
= Move  
- - -  
Ch--  
- - -  
Ch--  
- - -  
Ch--  
- - -  
Ch--  
= Sel  
- - - / - -  
Deck 2 - -  
- - - / - -  
Deck 2 - -  
- - - / - -  
Deck 2 - -  
- - - / - -  
Deck 2 - -  
MENU=Quit  
➔
:
:
:
/
➔
TIMER RECORDING 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET MONTH [01-12]  
SET DAY [01-31]  
SET HOUR [01-12]  
SET MINUTE [00-59]  
SET AM/PM [1/2]  
SET MONTH [01-12] : 08  
Aug 1998 12:25 PM 1H00M  
Su Mo  
Set Event Date & Time  
3
4
Tu We  
Th  
Fr  
Sa  
1
Use the number keys to set the date and  
time of the event. The default setting is the  
current date and time. To leave an entry  
unchanged, press the right arrow key. If you  
enter an invalid number, you will be  
prompted to reenter a valid one.  
• Set Month — Enter the month as a 2-digit  
number; i.e. for August, press “08”.  
• Set Day — Enter the day as a 2-digit  
number; i.e. for the ninth, press “09”.  
• Set Hour — Enter the hour as a 2-digit  
number; i.e. for 12:00, press “12”.  
2
9
16  
23  
30  
3
10  
17  
24  
31  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
8
15  
22  
29  
1
-
Time  
Ch10  
Deck2  
Auto  
• Set Minute — Enter the minute as a 2-  
digit number; i.e. for 00:25, press “25”.  
• Set AM/PM — Enter 1 for AM or 2 for PM  
SET LENGTH (H) [0-9]  
SET LENGTH (M) [00-59]  
SET LENGTH (H) [0-9] : 00  
12:25 PM 1H00M  
Tu We  
Set Event Length  
Aug 1998  
Su Mo  
Th  
Fr  
Sa  
1
Use the number keys to set the length of the  
event. The default setting is 0 Hours and 30  
Minutes.  
2
9
16  
23  
30  
3
10  
17  
24  
31  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
8
15  
22  
29  
1
-
Time  
Ch10  
Deck2  
Auto  
• Set Length (H) — Enter the hours as a 2-  
digit number; i.e. for 1 hour, press “01”.  
• Set Length (M) — Enter the minutes as a  
2-digit number; i.e. for 30 minutes, press  
“30”.  
58 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET TYPE [1-4] : 1  
12:25 PM 1H00M  
SET TYPE [1-4]  
Set Event Type  
Aug 1998  
Su Mo  
5
6
1 - Time  
Weekly  
Mo-Fr  
Tu We  
Th  
Fr  
Sa  
1
Use the number keys (1-4) to set how often  
the event will be recorded. The default  
setting is one time.  
1 1 - Time — The event will be recorded  
once only.  
2 Weekly — The event will be recorded  
every week.  
3 Monday–Friday — The event will be  
recorded every weekday.  
2
9
3
10  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
8
Always  
15  
22  
29  
16  
23  
30  
17  
24  
31  
1
-
Time  
Ch10  
Deck2  
Auto  
4 Always — The event will be recorded  
every day.  
Cable Box Recording—  
SET SOURCE [1-2]  
Set Recording Source  
SET SOURCE [1-2] : 01  
12:25 PM 1H00M  
Aug 1998  
Su Mo  
Ch##  
Aux  
If you are programming a timer  
recording with a cable box, set  
the Record Source to Channel  
2, 3, or 4—whichever your  
cable box uses—and select the  
channel you wish to record on  
the cable box.  
Tu We  
Th  
Fr  
Sa  
1
Use the number keys (1-2) to set the record  
source. The default setting is the current  
tuner channel.  
2
9
3
10  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
8
15  
22  
29  
16  
23  
30  
17  
24  
31  
1
-
Time  
Ch10  
Deck2  
Auto  
1 Channel — Records video and audio  
from the Tuner. Use the number keys (0-  
9) or up/down arrow keys to set the  
channel number.  
2 Aux — Records video and audio from the  
front auxiliary inputs.  
TIMER RECORDING 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Complete Program Record  
When Auto is selected, the  
Timer event begins to record  
in SP; the VCR then calculates  
how much time is remaining  
on the tape and adjusts the  
record speed to SLP if neces-  
sary to fit the entire event. If  
there is not enough tape to  
record the entire event, the  
VCR will record in SLP until  
the end of the tape is reached.  
Set Recording Speed  
SET SPEED [1-3] : 1  
12:25 PM 1H00M  
SET SPEED [1-3]  
7
8
Aug 1998  
Su Mo  
Auto  
SP  
SLP  
Tu We  
Th  
Fr  
Sa  
1
Use the number keys (1-3) to set the  
recording speed. The default setting is Auto.  
1 Auto — Complete Program Record (see  
note at left).  
2 SP — Standard Play. Delivers best quality.  
A T-120 tape will record 2 hours.  
3 SLP — Super Long Play. Delivers maxi-  
mum recording time. A T-120 tape will  
record 6 hours.  
2
9
3
10  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
8
15  
22  
29  
16  
23  
30  
17  
24  
31  
1
-
Time  
Ch10  
Deck2  
Auto  
Confirm Settings  
SELECT EVENT [1-16]:01  
1
2
3
4
10:30 PM  
1H30M  
On  
Ch10  
- - -  
Ch--  
- - -  
Ch--  
- - -  
Ch--  
= Sel  
Wednesdays  
Deck2 Auto  
- - - / - -  
Deck 2 - -  
- - - / - -  
Deck 2 - -  
- - - / - -  
Deck 2 - -  
MENU=Quit  
➔
:
When all settings are complete, press Menu  
to confirm the Timer event and view a  
summary of all programmed events.  
• To program another event, select the next  
available event number.  
- - : - - - -  
- H - - M  
- - : - - - -  
- H - - M  
- - : - - - -  
- H - - M  
= Move  
:
:
/
➔
• To edit an existing event, select an event  
number that has already been pro-  
grammed.  
• To delete an event, use the up/down  
arrow keys to select it, then press Clear.  
• To exit the Event Summary screen, press  
Menu.  
60 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Be sure your videotape has a  
Record Safety Tab. If it is  
missing, you can cover the  
opening with a small piece of  
tape. Warning: Do not cover  
this opening unless you are  
sure you want to record over  
the tape.  
Insert Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
9
Power  
Copy Tape  
Insert a blank tape with a Record Safety Tab  
into Deck 2.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
Timer Recording is Complete!  
10  
TIMER  
VCR  
Hi-Fi  
The event is stored in memory and will  
record at the scheduled time. A red Timer  
icon will appear on the front panel display.  
D E C K O N E  
S P  
S P  
Notes:  
• If there is a problem with your Timer  
Recording, the Timer icon will flash and a  
Timer Record Error will appear on the  
screen; see page 62.  
Record Safety Tab  
• The Power will come on automatically  
when the Timer Recording begins.  
• To stop an event in progress, press Stop for  
Deck 2. A warning message will appear on-  
screen. Press Stop again to cancel the  
event.  
TIMER RECORDING 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording Errors  
If there is a problem with your  
Timer Recording, the word  
Tape Missing  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Timer will flash on the Front  
Panel Display and an error  
message will appear on the  
On-Screen Display. Once you  
correct the error, the event will  
begin if there is still time  
No videotape in Deck 2.  
• Insert a videotape in Deck 2.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
Tape Missing Tab  
No Record Safety Tab in videocassette.  
remaining for that event.  
• Insert a video cassette with the record safety  
tape intact, or place a small piece of adhesive  
tape over the opening to permit recording.  
Record Safety Tab  
Not Ready  
Deck 2 is not in Stop mode (i.e. it is playing,  
rewinding, etc.).  
• Press Stop on Deck 2.  
Overlapping Events  
TIMER EVENTS OVERLAP  
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16  
Please review the events  
from the Select Event  
Two or more events are programmed to occur at  
the same time:  
menu and remove one  
using the CLEAR key  
• When you program a new event, the VCR  
checks all timer events for conflicts. If two  
events overlap, you will be prompted to either  
delete one of the events, or allow them to  
overlap.  
• If events overlap, the first event will be  
completely recorded, then the next event  
starts and the remainder of that event is  
recorded.  
SELECT EVENT [1-16]:01  
___________________________________
MENU to Continue  
1
2
3
4
10:30 PM  
On  
Wednesdays  
➔
:
1H30M  
9:00 AM  
0H30M  
7:00 PM  
2H00M  
12:15 PM  
0H15M  
= Move  
Ch10  
On  
Line1  
On  
Line2  
On  
Ch06  
= Sel  
Deck2 Auto  
Sun Dec/06  
Deck2 SP  
:
Mon-Fri  
Deck2 SLP  
Everyday  
Deck2 Auto  
MENU=Quit  
:
/
➔
62 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9 - Editing Features  
8-Scene Editor  
There are two ways to edit  
your movies with the Dual-  
Deck VCR. You can use the 8-  
Scene Editor, which automati-  
cally assembles up to 8 scenes  
when you mark their beginning  
and ending points. Or you can  
use the Sync Edit feature,  
Insert Source Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
1
2
Power  
Copy Tape  
Put the tape with your source material in  
Deck 1.  
DDV9485  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
Insert Target Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
which allows you to manually  
cut unwanted scenes while  
copying a tape.  
Power  
Copy Tape  
Put your blank tape in Deck 2. To ensure  
quality edits, it is best to record on blank or  
pre-formatted tapes. You can format your  
tapes by recording the line input over the  
entire tape with no signal.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
Review Source Tape  
3
4
Make a list of the scenes you wish to use in  
your final movie with their beginning and  
ending tape counter positions. Reorder the  
scenes if desired.  
MAIN MENU  
Open “Main Menu”  
1
2
3
4
5
6
EZ Copy  
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
Off  
Off  
➔
:
:
:
:
Press Menu.  
:
/
To Move  
MENU to Quit  
Hold MENU Key For Setup  
To Select  
➔
EDITING FEATURES 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select “8-Scene Edit List”  
Scene  
Begin  
End  
:
:
:
1 - - - - - -  
0 : 00 : 00  
- : - - : - -  
5
Press 4 to open the 8-Scene Edit List menu.  
The number 1 and “Begin” will flash.  
1 - 8 To Select Scene  
EDIT For Begin And End  
CLEAR To Correct  
COPY TAPE To Make  
MENU To Quit  
A
Tape  
Select Scene Number  
Scene  
Begin  
End  
:
:
:
1 - - - - - -  
0 : 00 : 00  
- : - - : - -  
6
7
Choose a scene number from 1 to 8. You  
can enter scenes in any order. The scene  
number you choose will flash.  
1 - 8 To Select Scene  
EDIT For Begin And End  
CLEAR To Correct  
COPY TAPE To Make  
MENU To Quit  
A
Tape  
Mark Beginning of Scene  
Scene  
Begin  
End  
:
:
:
1 - - - - - -  
0 : 00 : 00  
- : - - : - -  
Play the tape to the beginning of the  
desired scene and press the Scene/Title  
button. The scene number and “End” will  
flash. Use the special playback functions to  
quickly find the position you want; see  
page 44.  
1 - 8 To Select Scene  
EDIT For Begin And End  
CLEAR To Correct  
COPY TAPE To Make  
MENU To Quit  
A
Tape  
Mark End of Scene  
Scene  
Begin  
End  
:
:
:
1 2 - - - - -  
0 : 00 : 00  
- : - - : - -  
8
Play the tape to the end of the desired  
scene and press the Scene/Title button. The  
next available scene number and “Begin”  
will flash. Use the Clear button to correct  
your entries. Repeat Steps 6-8 to load up to  
8 scenes at a time.  
1 - 8 To Select Scene  
EDIT For Begin And End  
CLEAR To Correct  
COPY TAPE To Make  
MENU To Quit  
A
Tape  
64 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Make a Tape  
9
When you are satisfied with the order and  
length of each scene, press Copy Tape to  
begin assembling the tape.  
Notes:  
• The Dual-Deck VCR will automatically  
copy each scene in order from the source  
tape to the target tape.  
• When the process is finished, return to  
Step 6 to add more scenes, or press Menu  
to quit.  
EDITING FEATURES 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sync Editing  
The second way to edit movies  
is to use Sync (short for  
Before You Begin —  
1
2
Synchronized) Editing. This  
method is useful if you want to  
copy part of a tape, or if you  
want to cut commercials while  
copying a TV show. The Copy  
Tape button is the key to  
• Turn off Auto Play; see page 48.  
• Turn off EZ Copy; see page 38.  
Insert Source Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Put the tape with your source material in  
Deck 1.  
synchronizing the playback  
deck with the recording deck.  
DDV9485  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
Insert Target Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
3
4
Power  
Copy Tape  
Put your blank tape in Deck 2.  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
Position Target Tape  
Play the tape in Deck 2 to where you want  
the copied material to start, then press Still.  
Leave at least 1 minute of blank tape at the  
beginning of a tape to ensure a crisp edit.  
Set Target Tape to Record/  
Pause  
5
While the target tape is in Play/Still mode,  
press Record for Deck 2. This puts the deck  
in Record/Pause mode.  
66 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To automatically cut commer-  
cials when performing a Sync  
Edit, see Skip Edit on the  
following page.  
Position Source Tape  
6
Play the tape in Deck 1 to the beginning of  
the segment you wish to copy, then press  
Still. Use the special playback functions to  
quickly find the position you want; see  
page 44. Copy will flash on the front panel  
display.  
Start Sync Edit  
7
8
Press the Copy Tape button. The tape in  
Deck 1 will begin copying to Deck 2.  
Pause/Resume Sync Edit  
Press the Copy Tape button to pause the  
Sync Edit. Copy will flash on the Front  
Panel Display. To resume, press Copy Tape  
again. With the Sync Edit paused, you can  
reposition the source tape in Deck 1, e.g. to  
fast-forward over a commercial.  
Stop Sync Edit  
9
To stop the Sync Edit process, press Stop on  
both decks.  
EDITING FEATURES 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to Cut Commercials with Skip Edit  
The Skip Edit feature allows  
you to remove commercials  
Set Up a Sync Edit  
1
during a Sync Edit at the touch  
of a button. Commercials  
typically run from 1 to 5  
minutes in length. Each time  
you press Skip Edit, you will  
automatically cut 1 to 5  
minutes of source tape from  
your target tape.  
Follow Steps 1-6 on page 66.  
Preview Commercials  
2
3
As you position your source tape, note how  
many minutes the commercials are that you  
wish to cut.  
Start Sync Edit  
Press Copy Tape to begin copying the  
source tape from Deck 1 to Deck 2.  
Cut the Commercials  
4
When the commercials start, press F.Adv/  
Skip once for every minute of commercials  
to be deleted. The Dual-Deck VCR will  
automatically edit out the commercials on  
the target tape, then resume copying.  
68 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Titler  
You can add titles or credits to  
your movies with the On-Screen  
Titler. Create your message from  
over 100 letters, numbers and  
symbols. There are two steps to  
using the Titler: Setting up the  
Titler Message and Recording  
the Title.  
MAIN MENU  
Open “Main Menu”  
1
2
3
4
5
6
EZ Copy  
Off  
Off  
➔
:
:
:
:
1
2
Child Lock  
Timer Recording  
8-Scene Edit List  
Setup Titler Message  
Language/Langue/Idioma  
To Move  
MENU to Quit  
Hold MENU Key For Setup  
Press Menu on the remote control.  
:
/
To Select  
➔
Select “Setup Titler Message”  
Press 5.  
Compose Your Message  
3
4
Use the up, down, left, & right arrow keys to  
select each character in your message,  
pressing Title after each to insert the character  
at the current cursor position. If you make a  
mistake, press Clear to backspace to the  
previous character.  
Save Your Message  
When you are satisfied with your message,  
press Menu to save and quit. To record your  
message, see page 70.  
EDITING FEATURES 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Titler Message  
Once you have set up your  
Titler Message, you can record  
Start Recording  
1
it by pressing the Scene/Title  
button while a tape is record-  
ing in Deck 2. You can record  
the title for up to 20 seconds in  
5-second increments.  
Insert your target tape in Deck 2 and  
initiate any Record mode, i.e., Record,  
One-Touch Record, Copy Tape, or Timer  
Record. See the corresponding chapters to  
activate any of these modes.  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
DDV9485  
Record Titler Message  
2
While in Record mode, press Scene/Title  
repeatedly to record your Titler Message  
on-screen for 5, 10, 15, or 20 seconds.  
Note: You must be recording a video signal  
when you record your Titler Message, i.e.  
you cannot record a title on blank tape.  
70 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 - Search/Index Features  
Overview  
The Dual-Deck VCR Search/  
Index features allow you to  
scan and search for Index  
Marks, quickly find blank  
space on a tape, search for  
exact tape counter positions,  
and return to 0:00:00. The  
real-time tape counter gives  
you real-time feedback on the  
precise position of your tapes.  
Clk/Ctr Button  
Press the Clk/Ctr button repeatedly to  
change the view on the front panel display  
among the following:  
VCR  
D E C K O N E  
Clock  
Shows you the time as set in the Set Clock  
Menu.  
S P  
S P  
PM  
Real-Time Tape Counter  
VCR  
D E C K O N E  
Shows you the tape position in the active  
deck in hours, minutes, and seconds.  
AM  
PM  
S P  
S P  
VCR  
D E C K O N E  
Time Remaining  
Shows you the amount of time left on the  
tape in the active deck, computed by  
subtracting the current tape position from  
the total tape length in hours and minutes.  
S P  
S P  
Note: The Clock/Counter/Time Remaining  
display will not appear if there is a deck  
status message on the front panel display,  
such as Copy, Play, Stop, etc.  
SEARCH/INDEX FEATURES 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placing Index Marks  
Index Marks are like bookmarks  
Automatic Index Marks  
on your videotapes. They are  
inserted automatically at the  
start of every recording, or you  
can place them manually  
anywhere on a tape.  
Index Marks are placed automatically  
whenever you start recording. This includes  
normal recording, OTR (One Touch  
Recording), timer recording, copying, or  
sync editing.  
Manual Index Marks  
Deck  
Stop  
- 0:20:45  
SP  
1
TV VIEW  
Ch 12  
Stereo  
Deck  
2
INDEX  
- 1:32:08  
SP  
You can place an Index Mark manually any  
time a tape is recording by pressing Search/  
Index on the remote control. “Index” will  
flash briefly on the On-Screen Display  
while the mark is recorded.  
Thu Jan 15, 1999  
12 : 34 PM  
72 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index Scan  
Index Scan will fast-forward or  
rewind to the nearest Index  
Mark, play a few seconds of  
tape, and then fast-forward or  
rewind to the next Index Mark.  
When you find the show you  
want to watch, press Play. Use  
this feature with the Date/Time  
Stamp to quickly find Timer  
Recordings on your tapes.  
SEARCH MENU  
Index Search / Scan  
Blank Search  
Direct Time Search  
Return to 0:00:00  
Open “Search Menu”  
1
2
3
4
1
2
➔
:
:
From Stop or Play mode, press Search/  
Index.  
:
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
DECK ONE INDEX MENU  
Select “Index Search/Scan”  
Index : - -  
Press 1.  
Scan:  
Search:  
Press FF or REW  
1–99 Then FF/REW  
MENU to Quit  
DECK ONE REVERSE SCAN  
Scan for Index Marks  
3
4
DECK ONE FORWARD SCAN  
Press FF or Rewind to begin scanning for  
Index Marks forwards or backwards.  
Review the Tape  
When the Index feature locates an Index  
Mark, it will play the tape for 5 seconds. If  
it is the scene you want to watch, press  
Play. If it is not, the VCR will automatically  
search for the next Index Mark.  
SEARCH/INDEX FEATURES 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index Search  
Index Search will fast-forward  
or rewind a specific number of  
Index Marks from 1 to 99.  
When it reaches the desired  
Index Mark, it will play the  
tape. Use Index Search when  
you know the exact Index  
Mark you want to locate.  
SEARCH MENU  
Index Search / Scan  
Blank Search  
Direct Time Search  
Return to 0:00:00  
Open “Search Menu”  
1
2
3
4
➔
:
:
1
2
From Stop or Play mode, press Search/  
Index.  
:
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
DECK ONE INDEX MENU  
Select “Index Search/Scan”  
Index : - -  
Press 1.  
Scan:  
Search:  
Press FF or REW  
1–99 Then FF/REW  
MENU to Quit  
Enter # of Marks to Search  
DECK ONE INDEX MENU  
3
4
Index : 05  
Enter a number from 1 to 99; i.e. press  
“0-5” for “5”.  
Scan:  
Press FF or REW  
Search:  
1–99 Then FF/REW  
MENU to Quit  
DECK ONE REVERSE SEARCH  
Search for Index Marks  
DECK ONE FORWARD SEARCH  
Press FF or Rewind to begin searching for  
Index Marks forwards or backwards. When  
the VCR locates the Index Mark, it will play  
the tape.  
Index : #
Index :  
5
74 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blank Search  
You can automatically find the  
next blank space of your  
videotape with Blank Search.  
This is useful when a video-  
tape has been used but still has  
open space left for recording.  
SEARCH MENU  
Index Search / Scan  
Blank Search  
Direct Time Search  
Return to 0:00:00  
Open “Search Menu”  
1
2
3
4
➔
:
:
1
2
From Stop or Play mode, press Search/  
Index.  
:
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
Select “Blank Search”  
DECK ONE BLANK SEARCH  
Press 2. The Dual-Deck VCR will automati-  
cally search for the next available blank  
space on your tape and stop. If no blank  
space is found, the tape will eject.  
SEARCH/INDEX FEATURES 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Direct Time Search  
Use Direct Time Search to  
locate a specific tape location  
in hours, minutes, and  
seconds. This is especially  
useful when you have taken a  
careful inventory of the  
contents of your tape for  
editing—you can advance the  
tape directly to the beginning  
of the desired scene.  
SEARCH MENU  
Index Search / Scan  
Blank Search  
Direct Time Search  
Return to 0:00:00  
Open “Search Menu”  
1
2
3
4
➔
:
:
1
2
3
From Stop or Play mode, press Search/  
Index.  
:
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
DECK ONE TIME SEARCH  
Select “Direct Time Search”  
Search To : - - : - - : - -  
Press 3.  
Enter Counter Value  
Enter [ 1 ] = Pos Or [ 2 ] = Neg  
Press CLEAR To Correct  
MENU to Quit  
Select +/– Counter Value  
DECK ONE TIME SEARCH  
Search To : - - : - - : - -  
Press 1 for positive or 2 for negative  
counter values.  
Enter Counter Value  
Enter [ 1 ] = Pos Or [ 2 ] = Neg  
Press CLEAR To Correct  
MENU to Quit  
DECK ONE TIME SEARCH  
Enter the Time  
4
5
Search To : 01 : 25 : 16  
Use the number keys (0–9) to enter the time  
in hours, minutes, and seconds. Press Clear  
to correct your entry.  
Enter Counter Value  
Enter [ 1 ] = Pos Or [ 2 ] = Neg  
Press CLEAR To Correct  
MENU to Quit  
DECK ONE TIME SEARCH  
Start the Search  
Searching To : 01 : 25 : 16  
Press Search/Index to advance the tape to  
the specified time.  
76 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Return to 0:00:00  
You can advance your video-  
tapes to tape counter position  
0:00:00 at the touch of a  
button. This feature is useful  
when editing from a baseline  
counter value of 0:00:00.  
SEARCH MENU  
Index Search / Scan  
Blank Search  
Direct Time Search  
Return to 0:00:00  
Open “Search Menu”  
1
2
3
4
1
2
➔
:
:
From Stop or Play mode, press Search/  
Index.  
:
____________________________________  
To Move To Select  
MENU to Quit  
/
➔
Select “Return to 0:00:00”  
D E C K O N E  
VCR  
Press 4. The tape will rewind or fast-  
forward to tape counter position 0:00:00.  
AM  
PM  
S P  
S P  
SEARCH/INDEX FEATURES 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
78 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 - Advanced Connections  
Cable Box Hookup  
This chapter will show you  
Connect Cable to Cable Box  
1
how to connect external  
devices, such as a cable box,  
stereo, or satellite receiver, to  
your Dual-Deck VCR.  
Connect an RF antenna cable from your cable  
wall outlet to the “In from Cable” jack on the  
Cable Box.  
Connect Cable Box to VCR  
IN  
LINE  
OUT  
2
(FROM ANT.)  
From Cable  
Box  
R
Connect a second RF cable from the “Out to  
TV” jack on the Cable Box to the “IN (FROM  
ANT.)” jack on the back panel of the VCR.  
AUDIO  
L
OUT  
RF  
(TO TV)  
VIDEO  
CH  
3
4
Connect VCR to TV  
IN  
LINE  
OUT  
3
(FROM ANT.)  
R
Connect the supplied RF cable from the “OUT  
(TO TV)” jack on the back panel of the VCR to  
your television’s “Antenna In” jack.  
AUDIO  
L
OUT  
RF  
(TO TV)  
VIDEO  
CH  
To TV  
3
4
Plug In VCR  
4
5
Connect the VCR power cord to a standard  
120V/60Hz wall outlet.  
Turn On TV, VCR & Cable Box  
ON  
Press the power buttons on the remote control,  
TV, and Cable Box.  
ADVANCED CONNECTIONS 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set VCR Output Channel  
CH  
6
7
8
Set the channel switch on the back panel of  
the VCR to 3 or 4, whichever is NOT used by  
your cable box.  
3
4
Tune TV to the Same Channel  
CH3/4  
Select the channel you used in step 6.  
Connection is Complete!  
LANGUAGE / LANGUE / IDIOMA  
1➔English  
2 : Français  
3 : Español  
The Set Language menu will appear on your  
television screen. Please proceed with Auto  
Setup in Chapter 2.  
Select = 1 - 3  
Choisir = 1 - 3  
Elegir = 1 - 3  
Notes:  
• Use your cable box to select channels.  
• If you are not getting a good picture, repeat  
steps 6 and 7 using the other channel; i.e.  
channel 4 instead of channel 3.  
80 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Connections  
You can enjoy stereo sound  
when watching movies and TV  
shows by connecting your  
Dual-Deck VCR to your home  
stereo system or stereo TV.  
IN  
LINE  
OUT  
Connect VCR to Stereo  
(ANT.
1
2
R
AUDIO  
L
Connect RCA cables from the Left & Right  
Audio Outputs on the back of the VCR to  
the Auxiliary Inputs on your stereo receiver.  
If you are using a stereo television, connect  
the Video Output as well.  
OUT  
RF  
(TO TV)  
To Stereo  
Auxiliary  
Inputs  
VIDEO  
CH  
3
4
Set Playback Audio to Hi-Fi  
DUAL-DECK FEATURES  
Remote Eject  
DUAL-DECK FEATURES  
Remote Eject  
1
2
3
4
5
6
7
:
:
:
:
:
On  
1
2
3
4
5
6
7
:
:
:
:
:
On  
Normal  
Both  
Auto  
Auto  
On  
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Normal  
Both  
Auto  
Auto  
On  
Playback Mode  
Auto Play / Rewind  
Panel Display  
Screen Display  
Deck1 Hi-Fi  
Make sure that Deck 1 Hi-Fi and Deck 2  
Hi-Fi are turned on in the Dual-Deck  
Features menu; see page 49.  
And  
On  
Off  
:
➔
:
On  
Off  
Deck2 Hi-Fi  
On  
➔
Deck2 Hi-Fi  
On  
____________________________________  
____________________________________  
= Move = Sel MENU=Quit  
/
= Move  
➔
= Sel  
MENU=Quit  
/
➔
Set Stereo to Auxiliary Mode  
3
4
Set your stereo receiver or television to  
“Aux” or “Tape,” whichever selects the line  
input for your brand of stereo.  
Play a Tape  
Hi-Fi  
Deck  
Hi-Fi  
Deck  
Power  
Copy Tape  
Insert a videotape in your VCR and adjust  
the volume on your stereo receiver or  
television. You should hear the audio  
through your stereo speakers!  
DDV9485  
Stop /Eject  
Pause  
Rewind  
Play  
F. Forward  
Record  
Deck Select  
ADVANCED CONNECTIONS 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV Monitor Connections  
Monitor-style televisions offer  
IN  
LINE  
OUT  
Connect VCR to TV Monitor  
(T.)  
1
improved sound and picture  
over regular televisions  
because they receive the  
audio and video signals  
directly from the VCR  
through the line inputs. Note:  
A TV monitor is not the same  
as a computer monitor.  
R
AUDIO  
L
Connect RCA cables from the Audio and  
Video Outputs on the back of the VCR to  
the Audio and Video Inputs on your TV  
monitor.  
OUT  
RF  
(TO TV)  
VIDEO  
CH  
3
4
To TV Monitor  
Audio/Video  
Inputs  
Set TV to Auxiliary Mode  
2
3
Set your TV monitor to “Aux,” “Video,” or  
“Line.” Refer to your monitor’s owner’s  
manual for the correct setting.  
AUX  
Connection is Complete!  
Note: With this connection, the TV and  
VCR buttons have no effect. It is as if the  
TV/VCR button on the front panel were  
always set to VCR.  
82 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Other Video Equipment  
You can connect a wide  
variety of audio/video equip-  
ment to your Dual-Deck VCR,  
including:  
• A Third VCR  
• Laser Disc Player  
• DVD Player  
To Audio/Video  
Outputs of  
External Device  
Connect Device to VCR  
1
Connect RCA cables from the Audio and  
Video Outputs of your external device to  
the Audio and Video Inputs on the front of  
the VCR.  
Hi-Fi  
Deck  
Copy Tape  
DDV9485  
TV/VCR  
Channel  
Video  
L
Audio  
R
Menu  
• Camcorder  
• Satellite Receiver  
• Video Game  
Since all of these devices use  
essentially the same connec-  
tions, they will be described  
together.  
Watch Device  
2
3
4
Press the TV View button until the playback  
from Aux (front panel inputs) appears on  
your TV screen.  
Record Device  
Press the TV View button until the playback  
from Aux (front panel inputs) appears on  
your TV screen, then press Record.  
SET SOURCE [1-2]  
Timer Record From Device  
SET SOURCE [1-2] : 01  
Aug 1998  
Su Mo  
12:25 PM 1H00M  
Ch##  
Aux  
Tu We  
Th  
Fr  
Sa  
1
Select Aux as your record source in the  
Timer Record menu. All other Timer Record  
settings should be set in the usual manner;  
see page 57.  
2
9
16  
23  
30  
3
10  
17  
24  
31  
4
11  
18  
25  
5
12  
19  
26  
6
13  
20  
27  
7
14  
21  
28  
8
15  
22  
29  
1
-
Time  
Ch10  
Deck2  
Auto  
ADVANCED CONNECTIONS 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A  
Multi-Brand Remote Setup  
You can program your remote  
control to operate many  
popular brands of televisions,  
cable boxes, and digital  
satellite systems (DSS).  
Turn On TV  
TV CODES  
1
ON  
Samsung (old)  
Sharp (new)  
Sony  
TV + 01  
TV + 02  
TV + 03  
TV + 04  
TV + 05  
TV + 06  
TV + 07  
TV + 08  
TV + 09  
TV + 10  
TV + 11  
TV + 12  
TV + 13  
TV + 14  
TV + 15  
TV + 16  
TV + 17  
TV + 18  
TV + 19  
TV + 20  
TV + 21  
TV + 22  
TV + 23  
TV + 24  
Press the power button on your TV.  
Program TV Code  
2
3
4
5
Magnavox  
Sanyo  
Press and hold down the TV button while  
entering the 2-digit code for your brand of  
television from the list at the right.  
Goldstar (new)  
RCA/GE  
Goldstar (old)  
Toshiba  
Check Your Results  
Hitachi  
If the TV advances to the next active channel,  
programming is complete! If the TV does not  
respond, try another 2-digit code. Some TV’s  
are not listed but can be programmed.  
JVC  
Panasonic  
Mitsubishi  
Samsung (new)  
Samsung (Latin)  
Sharp (old)  
Zenith  
Program Cable Box/DSS Code  
Press and hold down the Cable/DSS button  
while entering the 2-digit code for your brand  
of Cable Box/DSS from the list on the next  
page.  
Goldstar  
Daewoo  
Sanyo (PAL)  
Emerson  
Check Your Results  
If the Cable Box/DSS receiver powers on OR  
off, programming is complete! If not, try  
another 2-digit code. Some devices are not  
listed but can be programmed.  
Sharp (PAL)  
Samsung (Latin)  
Panasonic 2  
APPENDIX A - MULTI-BRAND REMOTE SETUP 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-Brand Remote Operation  
CABLE BOX/DSS CODES  
Operate Your TV, Cable Box,  
or DSS  
6
Cable Box/DSS Brand  
Anvision  
Archer  
Cablestar  
Cableview  
Citizen  
Curtis  
Diamond  
Eagle  
Eastern  
GC Brand  
Gemini  
2-Digit Code  
13,20,21,22,23,24,25,26,58,62  
29,42,44  
13,20,21,22,23,24,25,26,58,62  
42,44  
42,44  
08,09,56,61  
29,44  
13,20,21,22,23,24,25,26,58,62  
28  
42,44  
04,30  
01,02,03,04,55,75,85  
14,15  
31,79,80  
01,02,03,04,55,75,83,85  
• Press TV to set the remote control to  
operate your TV.  
• Press Cable/DSS to set the remote to  
operate your Cable Box or DSS receiver.  
• See the remote control diagram at left to  
see which keys are available in TV or  
Cable/DSS mode.  
General Instruments  
Hamlin  
Hitachi  
Jerold  
Macom  
31,79,80  
13,20,21,22,23,24,25,26,58,62  
32,38,39  
38,39  
10,11,12,13,46  
46  
06,08,16,17,96  
13,20,21,22,23,24,25,26,58,62  
Notes:  
Magnavox  
Movietime  
NSC  
• When the remote control is in TV or  
Cable/DSS mode, it will NOT operate  
your VCR. To return to VCR mode, press  
VCR on the remote control.  
Oak  
Oak Sigma  
Panasonic  
Philips  
Pioneer  
05,06  
• The highlighted buttons will operate  
many brands of TV, but not all keys will  
function for all devices.  
Pulser  
Randtek  
RCA  
43,44  
13,20,21,22,23,24,25,26,58,62  
06,08,16,17,97  
14,23,41  
Regal  
Rembrandt  
Samsung  
Scientific Atlanta  
Sheritech  
SL Mark  
Sony  
32  
04,06,42,44,78,86  
08,09,61,56  
26,27,28  
04,06,42,78  
98  
Sprucer  
06,08,16,17  
04,06,42,44,78  
19  
Stargate  
Sylvania  
Teknika  
74  
Telecaption  
Teleview  
Texscan  
TOCOM  
Toshiba  
77  
04,06,42,78  
18,19  
33,34,48,49,73  
36,99  
Unika  
20,21,29,42,44  
43,52,63,82  
07,45,50,59  
13,20,21,22,23,24,25,26,58,62  
06  
Universal  
Videoway  
Viewstar  
Warner Amex  
Zenith  
TV/Cable/DSS Keys  
07,45,50,59  
86 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B - Help  
Frequently Asked Questions (FAQs)  
The following are some of the  
most frequently asked questions  
Why am I not getting a picture?  
• Make sure the TV/VCR button on the front panel is set to VCR (the VCR icon on the front panel display  
should be on).  
about our Dual-Deck VCRs. If you  
don’t find the answers you need  
here, you can contact our Cus-  
tomer Service Department by  
phone at (480) 922-0896. Office  
hours are Monday-Friday, 6:00  
a.m. to 7:00 p.m. and 8:00 a.m. to  
4:00 p.m. MST on Saturday. You  
can also contact us anytime at our  
e-mail address: “custsvc@  
• Make sure your TV is set to the same channel (3 or 4) as the switch on the back of your VCR.  
Why is the picture quality poor?  
• Change the channel switch on the back of the VCR, i.e. if it’s set to 3 change it to 4. Make sure your TV is set  
to the same channel.  
• If the picture is bad while playing a tape, try adjusting the tracking control. Press the Auto (Automatic  
Tracking) button or the manual Tracking  
/
keys on the remote control.  
sensoryscience.com.” Or refer to a  
listing of authorized Go-Video  
service centers on our Web site at  
“www.govideo.com.”  
• The video heads may be dirty; try cleaning the heads with a nonabrasive head cleaning tape.  
Why can’t I record from my cable box?  
Make sure the VCR is tuned to the cable box output channel (2, 3, or 4). Confirm this channel with your local  
cable provider.  
Why can’t I Timer Record?  
• Make sure the clock is set to the correct time, and the AM/PM adjustment is set correctly.  
• If you have a cable box, make sure the Record Source is set to the cable box output channel (2, 3, or 4), and  
that the cable box is set to the channel you wish to record.  
APPENDIX B - HELP 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Why isn’t my remote control working?  
• Make sure you are pointing the remote control directly at the VCR and that there are no obstacles between  
the remote control and VCR. Sunlight on the VCR front panel can sometimes interfere with the remote  
signal.  
• Make sure the batteries in your remote are fresh and installed properly.  
• The “TV” button may have been pressed by accident. This makes the remote control only operate the  
television. Press the VCR key on the remote and try again.  
Why do my tapes record at different speeds when I use Copy Tape?  
Because Speed Matching is off in the Copy & Record Settings menu. Turn Speed Matching on to guarantee that  
the recording speed of the copy will match the playback speed of the source tape.  
Why does the tape eject when I use Copy Tape or put a tape in to record?  
Make sure the Record Safety Tab has not been removed from your tape. If the tab is missing, you can place a  
small piece of tape over the opening.  
Why does the tape sometimes play or rewind when I don’t want it to?  
• Turn Auto Play/Rewind off in the Dual-Deck Features menu. When this feature is turned on, the VCR will  
automatically play tapes whenever you load them and/or rewind tapes when they reach the end.  
• Turn EZ-Copy off in the Copy and Record Settings menu. When EZ-Copy is turned on, both decks will  
automatically rewind before recording when you press Copy Tape.  
88 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Why does my on-screen display show “Error”?  
This indicates a problem with the VCR tape mechanism. Turn the power off and on again to reset. If this does  
not clear the error, unplug the VCR from the power outlet and inspect both tape slots for foreign objects, or for  
jammed or crooked tapes.  
Why can’t I eject a tape using my remote?  
• Make sure Remote Eject is turned on in the Dual-Deck Features menu.  
• If you have programmed scenes for editing in the 8-Scene Edit List, you cannot eject the tape in Deck 1 with  
the remote control. This protects you from losing your scene programming. You can either clear the scenes  
from the Edit List or press Stop/Eject on the front panel, which erases the scenes automatically.  
Why can’t I reset the Deck 1 tape counter?  
If you have programmed scenes for editing in the 8-Scene Edit List, you cannot reset the Deck 1 tape counter.  
This protects you from losing your scene programming. You can either clear the scenes from the Edit List or  
press Stop/Eject on the front panel, which erases the scenes automatically.  
Why doesn’t my VCR work?  
• A strong static electricity shock or other unforeseen circumstances may cause the control system of your  
Dual-Deck VCR to lock up. To reset the control system, first unplug the power cord from the wall outlet for  
10 seconds and plug it in again.  
• If this doesn’t restore all operations to normal, unplug the VCR again for 15 minutes. You will then need to  
reset the clock (if the clock is still set, you haven’t unplugged it long enough).  
• If these steps do not correct the problem, the Dual-Deck VCR must be serviced by an authorized service  
center.  
APPENDIX B - HELP 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Why can’t I bring up the 8-Scene Edit List?  
• Insert a tape in Deck 1. The VCR must have a tape in Deck 1 for the Edit List to appear.  
• Edit List is not available during Copy Tape.  
Why aren’t the tape counters moving?  
If the VCR is playing a blank section of tape (only video noise, or “snow” appears on-screen), the tape counter  
cannot operate. The VCR requires a control track, which is only present on recorded tape, to provide counter  
information.  
Why can’t I get a menu or an on-screen display?  
• If the VCR is playing a blank section of tape (only video noise, or “snow” appears on-screen), the VCR  
cannot produce on-screen menus or displays. Stop the tape or record on it to enable the displays.  
• The remote may be set to control the TV instead of the VCR. Press the VCR button on your remote to reacti-  
vate it.  
• If the Date/Time Stamp is set to Cont (Continuous) and a recording is in progress, the on-screen menus and  
displays are disabled. Press Stop on the recording deck to restore normal on-screen functions.  
Why do I get a blue screen?  
• If a channel is too weak to deliver a clear picture, the VCR will display a blue screen in its place. To see  
channels with poor reception, turn on the Show Weak Channels feature in the Tuner and Channel List menu.  
• Double-check your antenna connections or tuner settings.  
Why is my Power button blinking?  
The VCR is in Auto Power Off mode. If you press the Power button while rewinding, copying, Timer Record-  
ing, One-Touch Recording or using EZ-Copy, the VCR will automatically turn off when the function is com-  
pleted. Pressing the Power button toggles Auto Power On and Off.  
90 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Why is “Copy Tape” blinking on the front panel?  
The Copy Tape procedure is in Pause mode. See Sync Editing on page 66.  
Why do I lose stereo sound when I turn on my VCR?  
If your TV and VCR are connected with an RF coaxial cable, you will only hear stereo sound if the VCR is  
turned off. To hear stereo sound with the VCR turned on, you must connect the TV and VCR with RCA line  
cables; see page 81.  
Why won’t my remote operate all my TV functions?  
The remote control does not have a command for every function of your television. Some brands of television  
will only respond to a limited number of functions. See the table on page 86 for a list of common brands and  
functions.  
APPENDIX B - HELP 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Specifications  
VIDEO SYSTEM  
1/2-inch VHS system, 4 rotary head helical scanning; FM azimuth luminance; chromi-  
nance: converted sub system phase shift  
NTSC-type color signal EIA standard (525 lines, 60 fields)  
Normal: 1 track; Hi-Fi: 2 track  
12.7 mm, 1/2 inch  
SP: 33.35 mm/s; SLP: 11.12 mm/s  
TELEVISION SYSTEM  
AUDIO TRACK  
TAPE WIDTH  
TAPE SPEED  
PLAY/RECORD TIME  
FF/REW TIME  
HEADS  
T-180 tape: SP 3 hours, SLP 9 hours  
T-120 tape: <110 seconds  
Video:  
DA 4 rotary heads  
Audio:  
Control:  
2 rotary heads (Hi-Fi); 1 stationary head (Linear)  
1 stationary head  
Erase:  
1 full track, 1 audio track  
VIDEO  
Input:  
Output:  
Horiz Res:  
S/N Ratio:  
AUDIO  
RCA Type, 75 ohms unbalanced, 1 V P-P  
RCA Type, 75 ohms unbalanced, 1 V P-P  
Monochrome, more than 230 lines  
Better than 43 dB  
Input:  
Output:  
TV Tuner:  
AUDIO IN (RCA) -8 dbm, 47K ohms  
AUDIO OUT (RCA) -8 dbm, 1.5K ohm  
181 channel frequency synthesized. VHF input Ch 2 - Ch 13. UHF input Ch 14 - Ch 69.  
VHF & UHF one input. Cable Ch 5A, A-5 through A-1, A-I, J through W+58, W+59  
through W+84. 75 ohm unbalanced F-type connector.  
Better than 68 dB (Hi-Fi)  
S/N Ratio:  
WOW & FLUTTER  
RF MODULATION  
FREQUENCY RESPONSE  
POWER REQUIREMENT  
CLOCK BACKUP TIME  
ENVIRONMENT  
Less than 0.005% (Hi-Fi)  
Channel 3 or 4  
20-20,000 Hz (Hi-Fi)  
120V AC, 60 Hz, 26 watts maximum  
1 minute  
41-104° F (5-40° C); 10%-75% humidity  
21" x 4" x 13" (534 x 105 x 331 mm)  
17 lbs. (7.5 Kg)  
DIMENSIONS  
WEIGHT  
92 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dual-Deck VCR Limited Warranty  
Who Provides the Limited Warranty  
During the warranty period, the Go-Video Warranty Administrator will honor  
Dual-Deck VCR service for 90 days labor, 1 year parts from the original date of  
consumer purchase. See below for Commercial, Industrial or Educational use  
coverage. Dual-Deck VCR remote controls are warranted for 90 days from the  
date of purchase.  
Who is Protected  
This warranty protects the original consumer owner of this Go-Video product.  
What is Covered and How Long  
This warranty covers internal operating parts and service/labor to repair or  
replace covered parts in this Go-Video product for 90 days labor, 1 year parts,  
from the date of purchase, defined as follows: (1) Original Consumer Retail  
Purchase; (2) First Rental Purchase Agreement; or (3) First Lease Purchase  
Agreement (the “Warranty Period”). Labor and replacement parts supplied  
during the Warranty Period are covered only for the remaining portion of the  
original Warranty Period. The Go-Video Warranty Administrator shall have no  
liability for service under this warranty if non-OEM (Original Equipment  
Manufacturer) replacement parts are used in the repair of your Go-Video  
product.  
What the Owner Must Do If Service is Required  
If service under this warranty is required, contact the Go-Video Warranty  
Administrator at (480) 922-0896 to determine the nearest authorized Go-Video  
service center.  
APPENDIX B - HELP 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Warranty Coverage  
Commercial, Industrial or Educational use has the same warranty coverage as  
stated in this warranty.  
What are the Exceptions  
This warranty does not cover: (1) Normal maintenance service, such as video  
head cleaning. (2) Damage from misuse, abuse neglect or accident, natural  
disasters or Acts of God. (3) Cabinetry, decorative parts, A/C adapters, knobs or  
buttons. (4) The foreign country use of this product. (5) Go-Video product  
which has been electronically or mechanically modified in any way or incor-  
porated into other products. (6) Installation and set-up service adjustments. (7)  
Owner instruction. Your Owner’s Guide provides information regarding  
operating instructions and user controls. For additional information, contact  
your authorized Go-Video dealer.  
Go Video is not responsible for any shipping, handling or insurance charges.  
This Exclusive Limited Warranty excludes all incidental and consequential  
damages. Some states do not allow the exclusion of incidental and consequen-  
tial damages, so the above exclusion may not apply to you.  
ALL IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES OF MER-  
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED  
IN DURATION TO THE DURATION OF THIS WARRANTY PERIOD. Some  
states do not allow limitations on how long an implied warranty lasts, so the  
above limitation may not apply to you.  
This Exclusive Limited Warranty gives you specific legal rights and you may  
also have other rights which vary from state to state.  
GO-VIDEO WARRANTY ADMINISTRATOR  
Sensory Science Corp.  
7835 East McClain Drive • Scottsdale, Arizona 85260-1732  
(480) 922-0896 • custsvc@sensoryscience.com  
94 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Index  
Aux 26, 59, 83  
Auxiliary Inputs 81  
Auxiliary Mode 81  
Connect Antenna to VCR 2  
Connect VCR to TV 2  
Connect VCR to TV Monitor 82  
Connecting Audio Source 42  
Copy 17, 27, 71  
Symbols  
0–9 Buttons 23, 31, 32, 51  
100+ Button 13  
8-Scene Editor 63, 64  
B
Copy Audio Insert 41, 42  
Copy Mode 39  
Basic Copying 37  
Basic Playback 43  
Batteries 1  
Blank Search 75  
Blank Space 71, 75  
A
Copy New Audio Track 42  
Copy Tape 13, 15, 37, 41, 65, 70  
Copy Tape Button 37, 66, 67, 68  
Copy/Record Settings 21, 41  
Copying 72  
Add Channel 31  
AM/PM 8  
Antenna 2, 29  
Antenna Cable 1  
Antenna Cable, RF 79  
Antenna In 79  
Antenna, Indoor/Outdoor 29  
Arrow Keys 69  
Audio Connections 81  
Audio Inputs 83  
Audio Left Input 16  
Audio Outputs 83  
C
Copyright 2  
Cue 44  
Cable 29  
Cable Box 79  
D
Cable Box Hookup 79  
Cable Box Recording 59  
CATV 29  
Ch +/– Buttons 13, 32  
Change Channels 26  
Channel 59  
Channel List 31, 32  
Channel Number 59  
Channel Up/Down 15, 51  
Child Lock 19, 21  
Clear Button 13, 23, 25, 64, 76  
CLK/CTR Button 17, 71  
Clock 7, 71  
Clock Set Channel 11  
Clock/Counter/Time Remaining Display  
71  
Commercials, Cutting 66, 67, 68  
Commercials, Previewing 68  
Complete Program Record 60  
Computer Monitor 82  
Confirm Settings 60  
Date and Time 27  
Date/Time Stamp 56, 73  
Day 8  
Audio Outputs, Left & Right 81  
Audio Right Input 16  
Audio Source 42  
Daylight Savings Time 7, 9  
Deck 1 14, 26, 37, 39, 40, 43, 49,  
66, 67, 68, 81  
Deck 2 14, 26, 37, 39, 40, 43, 49,  
63, 66, 67, 68, 70, 81  
Deck 2 Record Source 55  
Deck Counter Position 27  
Deck One 17  
Deck One Tape Status 17  
Deck Play/Record Speed 27  
Deck Record Source 27  
Deck Select 15  
Deck Status 27, 28  
Deck Two 17  
Deck Two Tape Status 17  
Direct Time Search 76  
Display 13  
Audio Status 27  
Audio Track, New 42  
Audio Track, Original 42  
Auto 29, 39  
Auto Channel Search 5, 30, 31, 32  
Auto Clock Set 7, 9, 11  
Auto Clock Set Channel 11  
Auto Play 19, 43, 48, 66  
Auto Play/Rewind 48  
Auto Rewind 48  
Auto Setup 3, 5, 80  
Auto Time Set 5  
Auto Tracking 46  
INDEX 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display Button 28  
Display Message 27  
Double-Speed 45  
Dual-Deck VCR 1  
Multi-Brand Remote Setup 85  
Music 41  
Mute 13  
I
Index Marks 71, 73, 74  
Index Marks, Automatic 72  
Index Marks, Manual 72  
Index Marks, Placing 72  
Index Scan 73  
Index Search 74  
Insert Tape 43, 61  
Internal Clock 5  
N
E
Not Ready 62  
Number Keys (0-9) 32, 59, 76  
Number Keys (1-4) 59  
English 5, 6  
Error Messages 27  
Event Length, Set 58  
Event Number, Choose 57  
Event Type, Set 59  
EZ Copy 21, 38, 66  
O
J
On-Screen Display (OSD) 26, 28, 53,  
62, 72  
On-Screen Display Elements 27  
On-Screen Language 5, 6  
On-Screen Menu System 21  
On-Screen Titler 69  
Jet Search 44, 45  
F
L
F.Adv/Skip Button 44, 45, 68  
F.Forward 14, 15, 24, 44, 74  
Factory Settings 25  
Language 6  
LCV (Last Channel Viewed) 13  
Left Arrow Key 23  
One-Touch Recording (OTR) 52, 53, 70  
OSD 26, 28  
FAQs 87  
Fast-Forward 73, 74  
Frame Advance 44  
Freeze Frame 44  
Linear Audio Track 49  
Loop, Continuous 47  
Loop Record 53  
OTR (One Touch Recording) 53, 72  
Overlapping Events 62  
P
French 5, 6  
Frequently Asked Questions 87  
Front Panel 15, 43  
Front Panel Display 17, 18, 52, 62, 71  
Front Panel Display Settings 18  
Front Panel Inputs 16, 83  
Lowest Channel Found 30  
Panel Display 18  
Pause 15  
Picture Search 44, 45  
Play Button 15, 17, 24, 43, 44, 52,  
71, 73  
M
Main Menu 6, 21, 23  
Menu Navigation - Front Panel 24  
Menu Navigation - Remote Control 23  
Message, Composing 69  
Message, Saving 69  
Play Mode 44, 74, 76  
Play Tape 43  
H
Hi-Fi 17, 34, 81  
Minute 8  
Monday-Friday 59  
Mono 34, 35  
Month 8  
Play/Still Mode 66  
Playback 17  
Playback Audio 81  
Playback Audio Settings 49  
Playback Speed 40  
Hi-Fi stereo sound 49  
HQ1 (High Quality 1) 39  
HQ2 (High Quality 2) 39  
Multi-Brand Remote Operation 86  
96 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plug In VCR 2  
PM 8  
Power 13, 15  
Power Button 3, 53, 85  
Remove Channel 32  
Repeat 45  
Set Month 8, 58  
Set Panel Display 18  
Set Screen Display 28  
Set Time Zone 10  
Set TV to Auxiliary Mode 82  
Set VCR Output Channel 2  
Set Year 8  
Setting Copy Audio Insert 41  
Setting Date/Time Stamp 56  
Setting Playback Mode 47  
Setup Menu 9, 21, 22  
Setup Titler Message 69  
Show Weak Channels 33  
Shuttle 45  
Reset Factory Settings 25  
Return to 0:00:00 77  
Reverse Jet Search 45  
Reverse Picture Search 45  
Review 45  
Rewind 15, 17, 24, 45, 73  
Rewind Button 74  
RF Antenna Cable 79  
Right Arrow 23  
Q
QSound 13  
Quick Reference Guide 1  
R
RCA Cables 16, 81, 82, 83  
Read Me First 1  
Real-Time Tape Counter 71  
Record Button 15, 51, 53, 70, 83  
Record Mode 53, 70  
Record Safety Tab 43, 51, 61, 62  
Record Source 55  
Record Speed 17, 27, 40, 54  
Record/Pause Mode 66  
Recording 72  
S
SAP (Second Audio Program) 17, 34, 35  
Satellite Receiver 79  
Scene, Beginning of 64  
Scene, End of 64  
Scene Number 64  
Scene/Title Button 64, 70  
Screen Display 28  
Search/Index Button 72, 74, 76  
Search/Index Features 71  
Second Audio Program 17  
Sequential/Loop 27  
Sequential/Loop Playback 47  
Set AM/PM 8, 58  
Set Clock 7, 21  
Set Clock Manually 7  
Set Day 8, 58  
Skip 45  
Skip Edit 67, 68  
Slow +/– Buttons 44  
Slow Motion 44  
SLP 17, 40, 54, 60  
Source Tape 37, 63, 66, 67  
SP 17, 39, 40, 54, 60  
SP/SLP Button 14, 40, 54  
Spanish 5, 6  
Special Playback Features 44  
Speed Matching 40  
Standard Play (SP) 54, 60  
Stereo 17, 34, 79  
Stereo Sound 17, 81  
Still Button 14, 44, 67  
Stop 14, 17, 71, 75, 76  
Stop/Eject 15, 24  
Super Long Play (SLP) 54, 60  
Sync Edit 63, 67, 68  
Sync Edit, Pausing 67  
Sync Editing 66, 72  
Recording, Basic 51  
Recording Deck, Set 60  
Recording Options 52  
Recording Source, Set 59  
Recording Speed 51  
Recording Speed, Set 60  
Recording, Start 70  
Recording Titles 69  
Registration Card 1  
Set Hour 8, 58  
Set Language 5  
Set Language Menu 3, 80  
Set Length (H) 58  
Set Length (M) 58  
Remote Control 1, 3, 19, 20, 23, 40,  
43, 72, 79, 85  
Remote Control Batteries 1  
Remote Control Overview 13  
Remote Eject 20  
Set Minute 8, 58  
INDEX 97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
Tuner & Channel List 21, 32, 33  
Tuner Audio 34  
Tuner Band 29, 30  
Tuner Information 28  
Turn On TV 3  
Turn On VCR 3  
TV 2, 3, 13, 79  
TV Button 85  
TV Mode 52  
TV Monitor 82  
TV Monitor Connections 82  
TV, Tuning 80  
TV View Button 14, 26, 27, 83  
TV+SAP 35  
TV/VCR Button 13, 15, 17, 51,  
52, 82  
VHF/UHF Antenna 29  
VHS, Standard 43  
Video 82  
Video Equipment, Connecting  
Other 83  
T-120 Tape 54, 60  
Tape Counter Positions 71  
Tape Counter, Real-Time 71  
Tape Missing Tab 62  
Tape Speed 17  
Target Tape 37, 63, 66  
Time 8, 11  
Time Remaining 71  
Time Zone 7, 9, 10  
Timer 17, 56, 62  
Video Inputs 83  
Video Line Input 16  
Video Outputs 81, 82, 83  
Voice-Overs 41  
Vol +/– 13  
W
Timer Event 60  
Warranty 1  
Timer Record 70, 83  
Timer Record Menu 57  
Timer Record Settings 83  
Timer Recording 17, 21, 25, 27, 56,  
57, 61, 62, 72, 73  
Watch Another Videotape 52  
Weak Channels 33  
Weekly 59  
U
X
Timer Recording Errors 17, 62  
Timer Recording, Setting 57  
Titler Message 69, 70  
Titler Message, Recording 70  
Titler, On-Screen 69  
Tracking 46  
Up/Down Arrow Keys 59  
Up/Down Arrows 23  
User’s Guide 1  
XDS 11  
Y
V
Year 8  
Tracking, Adjust Manually 46  
Tune TV 3  
Tuner 26, 28, 55  
VCR 2, 3, 17, 19  
VCR Mode 17, 85  
VCR Output Channel 80  
98 DDV9485 USER’S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7835 East McClain Drive  
Scottsdale, Arizona USA 85260  
www.sensoryscience.com  
www.govideo.com  
Printed in Korea  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Chainsaw CS 300 CS 340 CS 345 User Manual
Everpure Water System EV9324 01 User Manual
Extron electronic Network Card PoleVault System A V Source Inputs User Manual
Extron electronic Switch Ultra Series User Manual
Fisher Price Motorized Toy Car 74260 User Manual
FUNAI CRT Television CSF420G User Manual
Garland Toaster CXBE12 1 User Manual
Garrett Metal Detectors Radar Detector None User Manual
GE Home Security System NX 108 116 124E User Manual
Glem GasEmilia Cooktop C64ECT User Manual