Model #:
Serial #:
Model SP20
Instruction Manual for Globe Mixers
(Models SP10, SP20, SP25, SP30, SP30P,
SP40P, SP60P, SP62P, and SP80PL)
For Service on Your Mixer
2. Or...Call Globe service department at 937-297-7247 and ask for the contact
information for your local service company
Visit our website for information on additional products available from Globe.
Slicers, Mixers, Vegetable Cutters, Meat Choppers, and Scales
- IMPORTANT SAFETY NOTICE -
This manual contains important safety instructions which
must be strictly followed when using this equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Attention Owners and Operators
Globe’s equipment is designed to provide safe and productive processing of food products as long as the
equipment is used in accordance with the instructions in this manual and is properly maintained. Unless the
operator is adequately trained and supervised there is a possibility of serious injury. Owners of this equipment
bear the responsibility to make certain that this equipment is used properly and safely, strictly following all the
instructions contained in this manual and the requirements of local, state or federal law.
Owners should not permit anyone to touch this equipment unless they are over 18 years old, are adequately
trained and supervised, and have read and understood this manual. Owners should also ensure that no
customers, visitors or other unauthorized personnel come in contact with this equipment. Please remember that
Globe cannot anticipate every circumstance or environment in which its equipment will be operated. It is the
responsibility of the owner and the operator to remain alert to any hazards posed by the function of this equipment.
If you are ever uncertain about a particular task or the proper method of operating this equipment, ask your
supervisor.
This manual contains a number of precautions to follow to help promote safe use of this equipment. Throughout
the manual you will see additional warnings to help alert you to potential hazards.
Warnings affecting your personal safety are indicated by:
or
Warnings related to possible damage to the equipment are indicated by:
Globe has put several warning labels in the English language on its mixers. French labels are also available
and can replace the English labels at the owner’s discretion. If the warning labels or this manual are misplaced,
damaged, or illegible, or if you require additional copies, please contact your nearest representative or Globe
directly for these items at no charge.
Please remember that this manual or the warning labels do not replace the need to be alert, to properly train and
supervise operators, and to use common sense when using this equipment.
Page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Components of the Mixer
Stop Button
Timer
Start Button
Attachment Hub
Thumbscrew
Attachment Hub
Bowl Lift Lever
Planetary Grease Fitting
Planetary Shaft
Bowl Lift Wheel
(Models SP40P and
SP60P)
Bowl Handle
Bowl Clamp
Power Bowl Lift Controls
(Models SP62P and
SP80PL)
SP20 FRONT VIEW
Gear Oil Meter
(Models SP62P
and SP80PL)
Speed Control
Bowl Guard
Splash Guard
Built in Ingredient Chute
Bowl
Bowl Cradle
Bowl Slides
Power Cord
Rubber Feet
SP20 SIDE VIEW
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
UNPACKING
Unpack the mixer immediately after receipt. If the machine is found to be damaged, save the packaging material
and contact the carrier within fifteen (15) days of delivery. Immediately contact your source of the equipment.
You have no recourse to damage after fifteen (15) days.
TO AVOID SERIOUS PERSONAL INJURY:
•
•
•
ALWAYS install equipment in work area with adequate light and space.
ONLY operate the mixer on a solid, LEVEL, non-skid surface that is nonflammable.
NEVER bypass, alter, or modify this equipment in any way from its original condition. Doing so my create
hazards and will void warranty.
•
•
NEVER operate the mixer without all warnings attached to it.
DO NOT attempt to lift the mixer alone.
INSTALLATION
1. Read this manual thoroughly before installation and operation. DO NOT proceed with installation and
operation if you have any questions or do not understand anything in this manual. Contact your local
representative or Globe first.
2. Remove the corrugated box from the skid by removing the bands on the box. NOTE: The SP62P and SP80PL
are shipped in a wooden crate. Only the bolts at the bottom of the crate (all four sides) need to be removed.
3. Carefully unbolt the mixer from the skid using a 11/16” or 3/4” wrench.
4. Select a location for the mixer keeping these points in mind:
•
•
•
•
•
Floor or counter must be level.
Easy access for maintenance and service.
Clearance for operating controls, installing and removing agitators, bowl, or attachments.
Sufficient space for adding ingredients during mixing periods.
Ensure rear ventilation outlet of mixer is not blocked.
5. Use at least two other people to tilt the unit and install the rubber feet.
6. A bolt down template and bolts are available for the SP10, SP20, or SP25. Contact Globe if this is needed.
7. Inspect the mixer to ensure all parts have been provided (i.e. bowl, beater, whip, and dough hook). The SP62P
only has a bowl and dough hook.
8. Read the electrical information found on the data plate located at the rear of the machine. The incoming
power should match the rating on the data plate.
CONNECTING TO ELECTRICAL POWER
Cord Connected Units: This machine is provided with a three-prong grounding plug. The outlet that
this plug is connected to must be properly grounded. If the receptacle is not the proper grounding type
contact an electrician. Do not under any circumstances cut or remove the third ground prong from the
power cord or use any adapter plug. Never use an extension cord. Low amp supply could damage the
mixer or cause a fire.
Page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
CONNECTING TO ELECTRICAL POWER cont’d.
Units Without Power Cord or Plug: Have a licensed electrician connect the unit to the power supply.
Three Phase Units: Have a licensed electrician wire the machine correctly to ensure that the planetary is
rotating in the same direction as the arrow sticker located on the front of the machine. Check the rotation
of the planetary shaft prior to first use. When standing in front of the mixer, the planetary shaft should be
moving in a clockwise direction (i.e., the planetary shaft should appear to move from right to left). If the
unit is operated backwards (counterclockwise) damage will occur to the mixer!
9. Complete the warranty card and mail it to Globe or register online at www.globeslicers.com/warranty.asp.
10. Clean the mixer prior to using it. Follow the cleaning instructions on page 11. NOTE: It is normal for the
factory to apply a generous amount of grease in and on the machines before initial use. Excess grease
(brown in color) will be on all metal surfaces (e.g. top portion of bowl guard, speed control, bowl clamps, bowl
lift lever, and attachment hub thumbscrew). Excess high-pressured grease (brownish-black) may also be
found on the planetary shaft and some drippings may be found in the bowl.
Operating Instructions
TO AVOID SERIOUS PERSONAL INJURY:
•
•
•
DO NOT remove the bowl guard.
DO NOT operate the mixer before reading the instruction manual first.
ALWAYS disconnect or unplug electrical power before cleaning, servicing, or adjusting any parts or
attachments.
•
ALWAYS keep hands, hair, and clothing away from moving parts.
ATTACHING THE BOWL TO THE MIXER
NOTE: Install the bowl BEFORE attaching the agitators.
1. Lower the bowl by pulling the bowl lift lever forward and down to its resting position. For
models SP40P and SP60P rotate the bowl lift wheel counterclockwise until it stops. For
the SP62P and SP80PL press the down arrow (blue button) to lower the bowl until it
stops.
Fig. 7-1
2. Lift the bowl by the bowl handles and
a. slowly position the locking pin (located on the rear of the bowl) into the hole in the
middle rear of the cradle (see fig 7-1).
b. lower the bowl onto the pins located on either side of the bowl cradle.
3. Once the bowl is positioned on the cradle, secure the bowl by pulling each bowl clamp
Fig. 7-2
Page 7
forward until the bowl is locked tight (see fig 7-2).
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
ATTACHING THE AGITATOR TO THE MIXER (i.e., Beater, Hook, Whip)
NOTE: It is easier to install the agitator prior to adding the ingredients into the bowl.
1. Rotate the bowl guard to the left so it rests in the open position (see fig 8-1).
Excessive force used to open and close the bowl guard may damage the
spring lock and bowl guard microswitch, and will void the warranty.
2. Slide the agitator slowly upwards onto the planetary shaft fitting the shaft pin through the
slot in the agitator (see fig 8-2).
Fig. 8-1
3. Rotate the agitator clockwise to secure it onto the planetary shaft.
MIXING INGREDIENTS
Follow the capacity chart located on page 13 in this manual.
Overloading or not following this chart will damage the mixer and void
the warranty.
Fig. 8-2
Agitators should always rotate in a clockwise direction around the bowl. If the agitator moves
counterclockwise, contact a licensed electrician immediately to remedy
incorrect wiring.
IMPORTANT: Make sure the speed control lever is on the first (1) speed.
1. Add the appropriate mixing ingredients into the bowl.
2. Lift completely up on the bowl lift lever until the bowl locks into position. On the
SP40P and SP60P rotate the bowl lift wheel clockwise until the bowl is all the way
up into position. For the SP62P and SP80PL press the up arrow (blue button) until the
bowl is up into position.
Fig. 8-3
3. Rotate the bowl guard to the right so it locks into the closed position (see fig 8-3).
A clicking sound will be heard.
NOTE: The mixer will not start if the bowl guard is open or the bowl is in the lowered position.
4. Set the timer for the appropriate mixing time or set the mixer for non-timed operation.
a. Timed Operation: Turn the timer knob in a clockwise direction at least five minutes past “0” to the desired
time. NOTE: To set the time for less than five minutes turn the timer knob clockwise to six then
counterclockwise back to the desired time.
b. Non-Timed Operation: Turn the timer knob in a counterclockwise direction to the green “on” position.
NOTE: Heavy loads should not be mixed longer than fifteen minutes at this setting without an equal
amount of rest time. Failure to adhere to these instructions may cause the mixer to automatically shut off
due to overloading.
Page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
5. Select the appropriate speed setting by lifting or lowering the speed control lever. Three fixed speeds are
available for use: first (1), second (2), and third (3). NOTE: The SP62P has two speeds and the SP80PL has
four fixed speeds.
Gear Speed
1 (low)
2 (medium)
3 (high)
Product Type/Ingredient
Heavy: mixing pizza, bread, pasta and donut doughs, waffle/cake batter, mashing potatoes
Medium: 2nd stage of mixing for donut dough, etc.
Light: whipping cream, egg whites, meringue
IMPORTANT: When mixing product always follow the recommended agitator and speed setting
according to the capacity chart located on page 13 of this manual.
6. Press the green start button located on the middle of the control panel.
Always STOP the mixer BEFORE changing speeds! Failure to do so may damage the
gears or other parts and WILL void the warranty!
7. To change the speed while mixing
a. press the red stop button
b. change the speed by raising or lowering the speed control lever
c. press the green start button to restart the mixer.
NOTE: The SP62P and SP80PL will automatically shut off if the speed is changed while the mixer is in operation.
NOTE: The mixer is equipped with a motor overload protection. If the mixer shuts off during operation reduce the
batch size and
a. SP25 and smaller models: Press the stop button then press the overload reset button.
b. Larger models: Wait two minutes. Press the stop button then press the start button.
NOTE: 2nd speed should never be used on 50% AR or lower with the exception of the SP60P. The SP60P
requires a 50% reduction in batch size to mix in speed 2 with 50% AR doughs.
NOTE: Reduce batch size by 10% if chilled flour, water below 70°F, ice, or high gluten flour is being used.
IMPORTANT: For heavier loads, the mixer should not run longer than fifteen minutes without pausing for a cool
down period of at least fifteen minutes or more before resuming mixing. For lighter loads the mixer should not run
longer than thirty minutes without pausing for a cool down period of at least thirty minutes or more before resuming
mixing.
8. When the ingredients have been thoroughly mixed, press the red stop button to stop the mixer. NOTE: If the
timer was used the mixer will automatically stop when the time has expired.
9. Lower the bowl by pulling the bowl lift lever forward and down to its resting position. For models SP40P and
SP60P, rotate the bowl lift wheel counterclockwise until it stops. For models SP62P and SP80PL press the
down arrow (blue button) until the bowl stops.
10. Rotate the bowl guard to the left so it is in the open position.
11. Remove the agitator from the planetary shaft by lifting it upwards then rotating it counterclockwise until it is
unlocked. Lower the agitator and remove from planetary shaft.
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
12. Push each bowl clamp backwards to unlock the bowl from the bowl cradle.
13. Lift up slightly on the bowl so it clears the pins on the bowl cradle.
Most batches are heavy. Always use two people to remove and transport the loaded
bowl after mixing is complete. A bowl truck is included with the SP60P, SP62P, and
SP80PL models and should be used to unload bowls containing more than 50 lbs.
per batch.
HOW TO USE THE ATTACHMENT HUB
Never put your hand into the feed chute when using any mixer attachment.
The mixer must be OFF before installing attachments! Do NOT use attachments while mixing!
Thumbscrew
1. Loosen and remove the attachment hub thumbscrew.
Plastic Cover
2. Remove the plastic cover from the attachment hub.
3. Lubricate the attachment shaft with a food quality grease or mineral oil.
4. Insert the attachment shaft into the hub making sure to line up the alignment pin with
the hub hole.
5. Tighten the thumbscrew back into the hub and securely tighten it.
6. Select the appropriate speed setting by lifting or lowering the speed control lever.
Recommended Speed while using attachments:
Attachment
Recommended Speed
Vegetable Slicer
Cheese Shredder/Grater
Meat Grinder
1 or 2
2 or 3
1 only
NOTE: Make sure the bowl is up and the bowl guard is closed. The mixer will not start if the bowl and the
bowl guard are not in the proper operating position.
7. Turn the timer knob in a counterclockwise direction to the green “on” position.
8. Press the green start button located on the middle of the control panel.
Always STOP the mixer BEFORE changing speeds! Failure to do so may damage the
gears or other parts and WILL void the warranty!
9. To change the speed while using mixer attachments
a. press the red stop button
b. change the speed by raising or lowering the speed control lever
c. press the green start button to restart the mixer.
NOTE: The SP62P and SP80PL will automatically shut off if the speeds are changed while the mixer is in
operation.
Page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning Instructions
•
•
•
•
•
Dilute detergent per supplier’s instruction.
DO NOT hose down or pressure wash any part of the mixer.
NEVER use a scrubber pad, steel wool, or abrasive material to clean the mixer.
NEVER use bleach (sodium hypochlorite) or bleach based cleaner.
ALWAYS remove the agitator after each batch. If not, the agitator can become stuck on the shaft and
difficult to remove.
The entire mixer, including removable parts, must be thoroughly cleaned and sanitized using the
procedures identified by your local health department and the ServSafe Essentials published by the
more details.
It is extremely important to sanitize the mixer and to follow the instructions on the quaternary
sanitizer container to ensure proper sanitation is achieved.
ALWAYS DISCONNECT OR UNPLUG THE ELECTRICAL POWER FROM THE MIXER BEFORE
CLEANING.
RECOMMENDED CLEANING
PART
REQUIRED ACTION
FREQUENCY
Agitators
Hand-wash using mild soap and water, rinse, dry, and sanitize.
Clean after each use.
Bowl
Using a scrubber pad, mild soap and water, apply pressure
to ensure the bowl is clean, rinse, dry, and sanitize. The bowl
can also be placed in a dishwaser for cleaning.
Clean after each use.
Safety Guard
For light-duty cleaning, fill bowl with mild soap and water.
Scrub the safety guard with a brush, rinse, dry, and sanitize.
Clean after each use.
Clean after each use.
Rear Splash Guard
Hand-wash using mild soap and water, or scrub with soft
bristle brush, rinse, dry, and sanitize.
Bowl Cradle
Hand-wash using mild soap and water, rinse, dry, and sanitize.
Daily
Planetary Shaft
Wipe with clean damp cloth, dry, and sanitize. Apply a light
quantity of Globe oil (mineral oil) to the planetary shaft after
cleaning.
Clean after each use.
Exterior
Hand-wash using mild soap and water, rinse, dry, and sanitize.
DO NOT use a water hose!
Daily
Daily
Hub Interior
Wipe with clean damp cloth, dry, and sanitize.
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Points
Your new Globe mixer will provide years of uninterrupted service, but only if you do the following.
Installation
•
•
Do not use an extension cord to connect electrical power.
Make sure all 3 Phase units (see data plate) run in the direction of the arrow on front of the machine.
Operation
•
•
•
Turn off the mixer prior to changing speeds.
Follow the capacity chart on page 13, especially for mixing dough.
Use only first (1) speed for mixing dough. 2nd speed should never be used on 50% AR or lower with the
exception of the SP60P. The SP60P requires a 50% reduction in batch size to mix in speed 2 with 50% AR
doughs.
•
If the unit shuts off during mixing (overload protection trips), reduce the batch size.
Maintenance
Add only 2 pumps of grease to the planetary grease fitting once a year.
•
Recommended Maintenance
PART
REQUIRED ACTION
FREQUENCY
Planetary Ring
Reapply grease (e.g. black axle grease).
Inject grease (2 pumps only) into zerk fitting
on the side of planetary. DO NOT over fill!
Once a year.
Bowl Slide Rods
Apply Globe oil (mineral oil) on the bowl slide rods.
Raise and lower the bowl to distribute the oil onto
the rods.
If the bowl becomes difficult to
raise or lower.
Gear Oil Meter
(SP62P and
SP80PL only)
Contact a Globe authorized servicer to change the
gear oil.
Once a year. When the gear oil
meter shows the oil being below
half of the circle.
Page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
Capacity Chart
The following maximum capacities are intended as a guideline only, varying factors such as the type of flour used,
temperature of water used, and other conditions may require the batch to be reduced.
Product
Agitator SP8
and
SP10
SP20
SP25
SP30/ SP40P
SP30P
SP60P
SP62P SP80PL
Speed
Waffle or Hot Cake
Beater
3 qts.
5 qts.
8 qts. 10 qts. 12 qts. 16 qts.
24 qts.
N/A 30 qts.
Batter
Whipped Cream
Whip
4 pts.
4 lbs.
2 qts.
4 qts.
5 qts.
6 qts.
9 qts.
12 qts.
40 lbs.
N/A 16 qts.
N/A 50 lbs.
Mashed
Beater
8 lbs. 15 lbs. 18 lbs. 23 lbs. 30 lbs.
Potatoes
Egg Whites
Whip
Whip
¾ pts.
½ pts.
1 pt.
1 qt. 1 ¼ qts. 1 ½ qts. 1 ¾ qts.
2 qts.
N/A
N/A
2 qts.
3 qts.
Meringue
¾ pts. 1 ½ pts. 1 ¾ pts.
1 qt. 1 ¼ qts.
1 ¾ qts.
(Qty of Water)
Raised Donut Dough Hook
2 lbs. 4 ½ lbs.
9 lbs. 12 lbs. 15 lbs./ 25 lbs.
20 lbs.
60 lbs.
70 lbs.
80 lbs.
75 lbs. 80 lbs.
75 lbs. 80 lbs.
90 lbs. 90 lbs.
50 lbs. 50 lbs.
(65% AR) *ꢀ
1st & 2nd
Heavy Bread Dough
Hook
3 lbs. 7 ½ lbs. 15 lbs. 20 lbs. 30 lbs./ 40 lbs.
35 lbs.
(55% AR) *•ꢀ
1st only
Bread and Roll Dough Hook
5 lbs. 12 ½ lbs. 25 lbs. 25 lbs. 45 lbs. 60 lbs.
(60% AR) *•ꢀ
1st only
Pizza Dough, Thin
Hook
2 lbs.
4 lbs.
5 lbs.
5 lbs.
9 lbs. 12 lbs. 16 lbs./ 30 lbs. 40 lbs. (1st)
25 lbs. 40 lbs. (2nd)
(40% AR) *•´ꢀꢁ
1st only
Pizza Dough, Medium Hook
5 lbs. 10 lbs. 15 lbs. 25 lbs./ 40 lbs. 70 lbs. (1st) 80 lbs. (1st) 90 lbs.
(50% AR) *•ꢀꢁ
1st only
36 lbs.
35 lbs. (2nd) 70 lbs. (2nd)
Pizza Dough, Thick
Hook
10 lbs. 20 lbs. 25 lbs. 40 lbs./ 50 lbs.
45 lbs.
70 lbs.
90 lbs. 100 lbs.
(60% AR) *•ꢀ
1st only
Fondant Icing
Cake
Beater
Beater
Beater
Hook
3 lbs.
6 lbs.
4 lbs.
½ lbs.
6 lbs. 12 lbs. 15 lbs. 18 lbs. 25 lbs.
10 lbs. 20 lbs. 25 lbs. 30 lbs. 40 lbs.
10 lbs. 18 lbs. 22 lbs. 27 lbs. 35 lbs.
36 lbs.
60 lbs.
50 lbs.
35 lbs.
N/A 60 lbs.
N/A 90 lbs.
Pie Dough
N/A 70 lbs.
Pasta, Basic Egg
Noodle
2 lbs.
5 lbs.
6 lbs.
8 lbs./ 17 lbs.
15 lbs.
40 lbs. 50 lbs.
*
NOTE: The mixer capacity depends on the moisture content of the dough. When mixing doughs (pizza, bread, or
bagels) check your AR%! %AR (% Absorption Ratio) = Water weight divided by flour weight. The capacities listed
above are based on flour at room temperature and 70°F water temperature. (1 gallon of water weighs 8.33 lbs.)
´
•
Maximum Mixing Time - 7 Minutes
If high gluten flour is used, reduce the batch size by 10%.
ꢀ
If using chilled flour, water below 70°F, or ice, reduce batch size by 10%.
2nd speed should never be used on 50% AR or lower with the exception of the SP60P. The SP60P requires a 50%
reduction in batch size to mix in speed 2 with 50% AR doughs.
ꢁ
Do not use attachments on hub while mixing!
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Causes
Action Required
Mixer will not run.
Bowl guard not closed.
Bowl not raised.
Rotate guard to the right until fully closed.
Raise bowl to highest position.
Timer is not engaged.
Turn timer at least five minutes past “0”, then to
desired time or set time to the green “on” position.
Power not connected properly.
Check all power connections. Plug into a live socket.
(Do not use extension cord!) Test socket with
another item.
Building circuit breaker is off.
Internal overload tripped.
Check breaker box.
SP25 & smaller models: Press stop button then
press reset button. Larger models: Wait two
minutes. Press stop button then press start button.
(If overload continues to trip, reduce batch size
and/or adjust recipe!)
Gear not engaged.
Switch gear fully into position. (Mixer will not operate
if the speed control lever is positioned in between
speeds)
Mixer stops during
mixing.
Internal overload tripped.
SP25 & smaller models: Press stop button then
press reset button. Larger models: Wait two
minutes. Press stop button then press start button.
(If overload continues to trip, reduce batch size
and/or adjust recipe!)
Damaged or broken transmission belt. SP25 & larger models: Technician to replace belt.
Speeds were changed during mixing, Return speed control lever to a speed model
SP80PL only.
position and restart the mixer.
Mixer is noisy.
Mixer is not installed on level surface. Adjust surface or relocate mixer. Make sure rubber
feet are installed.
Bowl not seated correctly or clamps
not in place.
Ensure bowl is seated into bowl cradle correctly and
bowl clamps are locked into place.
Agitator not fitted properly.
Overloading bowl.
Remove and attach agitator into position properly.
Reduce batch size. (See Capacity Chart)
Replace belt.
Damaged or worn belt.
Planetary ring gear needs
more grease.
Technician to inspect for source of noise.
Reapply high-pressure grease.
Safety guard seized Clean & lubricate slide sheath.
(will not move freely).
Technician must drop down planetary to access mat
& sheath.
Agitators won’t go
onto the planetary
shaft easily.
Lack of lubrication and/or cleaning
of the planetary shaft.
Wipe planetary shaft with a clean damp cloth and
lubricate the shaft with mineral oil or food quality
grease.
Page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possible Causes
Action Required
Mixing time is too Three-phase mixer is wired wrong.
long.
Agitators should rotate clockwise around bowl. If not,
electrician must rewire.
Batch size too small.
Increase batch size or use smaller bowl adapter kit.
(Contact dealer for purchase)
Incorrect recipe portions or
temperatures.
Follow portions and temperatures per recipe
instructions.
Bowl raise sticking Lack of lubrication on bowl slides
or not operational
Lubricate bowl slides with mineral oil or food quality
grease. If still sticking, technician must clean bowl
raise mechanism.
One or more gears Broken belt.
not working.
Technician to replace belt.
Damaged or broken gear.
Technician to replace gear. Always stop mixer
before shifting gears!
Mixer will not mix
medium or heavy
loads.
Incorrect or low voltage.
Belt slipping.
Contact electrician.
Technician to replace belt.
Residue leaking
from hub.
Contaminated hub due to build-up of
meat and/or vegetable juices
(especially tomatoes).
Technician to remove hub and clean interior. To avoid
problem, always wipe hub and dry after each use.
*Note: Acid from tomato juices will corrode/
contaminate interior parts! Don’t mix tomatoes in
meat grinder!
Agitators touching Defective or dented bowl.
bottom or sides of
Remove dents or replace bowl.
Replace agitator.
bowl.
Defective agitator.
Broken whip wires Batch size too large for mixer. Items
Reduce batch size. (See Capacity Chart) Adjust
recipe. Reduce speed.
too firm, speed too high.
Hand utensil dropped into bowl while
mixing.
Stop mixer before working on mixture.
Broken flat beater Ingredients too cold or too large
(e.g. frozen butter, cream cheese
cut in chunks).
Wait for ingredients to reach room temperature
before mixing. Reduce chunk size.
Broken dough
hook
Batch size too large for mixer.
Reduce batch size. (See Capacity Chart)
Adjust recipe.
Ingredients too cold or too large.
Wait for ingredients to reach room temperature
before mixing. Reduce chunk size.
Mixture climbs up Three-phase mixer is wired
Electrician to rewire.
dough hook.
incorrectly.
Discoloration of
mixed product.
Bowl has not been thoroughly cleaned. Clean bowl again (refer to page 11).
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Mixer Warranty
Globe Food Equipment Company (“GFE”) warrants to the original purchaser of new equipment that said
equipment, when installed in accordance with our instructions within North America and subjected to normal use,
is free from defects in material or workmanship for a period of 2 years on parts (excludes wear/expendable parts).
The labor warranty is 1 year on labor from original installation, or 18 months from actual shipment date, whichever
date occurs first. Mixer attachments have a 1 year replacement warranty from invoice date. There is no labor
warranty for mixer attachments. The vegetable slicing assembly, shredder/grater assembly, and meat grinder are
considered mixer attachments.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED. GFE
EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
GFE’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIRING AND
REPLACING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITHIN
THE APPLICABLE WARRANTY PERIOD. All repairs pursuant to this Warranty will be performed by an
Authorized Designated GFE Service Location during normal working hours. IN NO EVENT SHALL GFE BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO BUYER OR ANY THIRD PARTY, INCLUDING,
WITHOUT LIMITATION, LOSS OF PROPERTY, PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR
OTHER ECONOMIC LOSSES, OR STATUTORY OR EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE,
WARRANTY, STRICT LIABILITY, OR OTHERWISE.
This warranty is given only to the first purchaser from a retail dealer. No warranty is given to subsequent
transferees.
This warranty does not cover product failures caused by: failure to maintain, neglect, abuse, damage due to
excess water, fire, normal wear, improper set up and use. Periodic maintenance is not covered.
This warranty is not in force until such time as a properly completed and signed installation/warranty registration
or an online registration form has been received by GFE within 30 days from the date of installation. Register
THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN
THE BUYER AND SELLER. GFE NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO ASSUME FOR
IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH SAID EQUIPMENT.
Example of items not covered under warranty, but not limited to just these items:
1.
2.
3.
4.
5.
6.
7.
Acts of God, fire, water damage, vandalism, accident, theft.
Freight damage.
Improper installation or alteration of equipment.
Use of generic or after market parts.
Repairs made by anyone other than a GFE designated servicer.
Lubrication.
Expendable wear parts. (This includes the bowl, flat beater, wire whip, spiral dough hook,
and the pastry knife.)
8.
9.
Cleaning of equipment.
Misuse or abuse.
Page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
|