1,000
POWE
RECH
VEC156-AU
INSTRUCTION
051010 ED11 PS
Download from Www.Somanuals.com. All Manuals Search And Download.
Dear Customer
Description of symbols
The rating plate on your tool may show symbols. These
represent important information about the product or instructions
on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information, please
phone our Help Line for an immediate response. Phone 1300
880 001 inAustralia or 0800 445 721 in New Zealand.
Battery
Introduction
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent GMC
Quality Standards to meet superior performance criteria.
Recycle unwanted materials instead of disposing of them
as waste.All tools, hoses and packaging should be sorted,
taken to the local recycling centre and disposed of in an
environmentally safe way.
You will find your new tool easy and safe to operate, and, with
proper care, it will give you many years of dependable service.
Do not throw into fire
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take special
care to heed the Cautions and Warnings.
Do not immerse in water
Do not dispose of as waste
Your GMC power tool has many features that will make your
job faster and easier. Safety, performance, and dependability
have been given top priority in the development of this tool,
making it easy to maintain and operate.
Charger
Conforms to relevant standards for
electromagnetic compatibility.
Must be used indoors
Is double insulated
Download from Www.Somanuals.co3m. All Manuals Search And Download.
Specifications
Safety instructions
WARNING. Read and understand all instructions. Failure to
followallinstructionslistedbelowmayresultinelectricshock, fire
and/orseriousinjury.Theterm“powertool”inallofthewarnings
belowreferstoyourmains-operated(corded)powertool or battery-
operated (cordless) power tool.
Charger
Input:
240VAC 50Hz
12V DC 300mA
Output:
DC charger adaptor
fuse 0.5A
SAVE THESE INSTRUCTIONS
Work Area
SpotLight
Spotlight Bulb:
Battery:
1. Keep work area clean and well lit. Cluttered and dark areas
invite accidents.
6V 55W Max Type H-3
Maintenance free,
sealed lead acid,
6V, 3Amp hour
2. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases, or
dust. Power tools create sparks which may ignite the dust
or fumes.
DC charger adaptor fuse:
Weight:
0.5A
1.5kg
3. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
Length:
209.5mm
101.6mm
196.85mm
Width:
Electrical Safety
Height:
1. Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Charge Time:
ACApprox 12–15 hours
(after first use)
DCApprox 12 - 15 hours
2. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed
or grounded.
Lighting Duration Spotlight:
Low
Med
High
Approx 40 Min
Approx 30 min
Approx 15 Min
3. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
4. Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
5. When operating a power tool outdoors, use an outdoor
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
Download from Www.Somanuals.co4m. All Manuals Search And Download.
Personal Safety
Power Tool Use and Care
1. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol, or medication. Amoment of inattention while
operating power tools may result in serious personal injury.
1. Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
2. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
2. Use safety equipment. Always wear eye protection. Safety
equipment such as a dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
3. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
3. Avoid accidental starting. Ensure the switch is in the off-
position before plugging in. Carrying power tools with your
finger on the switch or plugging in power tools that have the
switch on invites accidents.
4. Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
4. Remove any adjusting key or wrench before turning the
tool on. Awrench or a key that is left attached to a rotating
part of the power tool may result in personal injury.
5. Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
5. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
6. Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving
parts.
6. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
7. Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
7. If devices are provided for the connection of dust
extraction and collection facilities ensure that these are
connected and properly used. Use of these devices can
reduce dust-related hazards.
Service
1. Have your power tool serviced by a qualified repair
personnel using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Download from Www.Somanuals.co5m. All Manuals Search And Download.
Additional safety instructions for the spotlight
WARNING. Contains non-spillable sealed lead acid battery.
Must be recycled or disposed of properly.
Additional safety instructions for the charger
•
Before using the charger, read all the instructions and
cautionary markings on the charger and spotlight.
•
•
•
Only charge your spotlight indoors as the charger is designed
for indoor use only.
DO NOT dispose of batteries in fire, as this may result in an
explosion.
WARNING. Do not allow any liquid to come into contact with
the charger. There is a danger of electric shock.
DO NOT open battery or short circuit, as this may cause the
battery to leak or get hot causing personal injury.
Allow the battery pack to cool down after charging, do not
place it in a hot environment such as a metal shed or open
trailer left in the sun.
1. Do not substitute power cords or charging adapters. Only
charge with suppliedAC and DC charging adapters.
ChargingAdapters for this unit supply 12 volts DC.
•
•
The spotlight is not intended for any use other than charging
the exact type of rechargeable battery pack as supplied
with the charger. Any other use may result in the risk of fire,
electric shock or electrocution.
2. Do not submerge in water. This unit is not waterproof - it is
water resistant.
3. Keep children away from spotlight. This is not a toy!
4. Lens gets very hot when spotlight is operating. Do not touch
lens while operating.
The charger and spotlight are specifically designed to work
together. Do not attempt to charge the spotlight with any
other charger than the one supplied.
5. Keep combustibles away from spotlight lens - extreme heat
can cause fires.
•
•
Do not place the charger near any heat source.
6. Do not stand the spot light when turned on with the lens face
downward.
Make sure that the charger cable is positioned where it will
not be stepped on, tripped over or otherwise subjected to
damage or stress.
7. Keep sharp objects away from lens - it is glass and it can
break.
•
•
•
Do not use an extension cord unless it is absolutely
necessary. The use of an improper extension cord could
cause the risk of fire, electric shock or electrocution.
8. Do not drop or throw spotlight, it contains glass and a sealed
lead acid battery.
Do not use the charger if it has been subjected to a heavy
knock, dropped or otherwise damaged in any way. Take the
charger to an authorised service centre for a check or repair.
9. Dispose of unusable batteries in a responsible manner (See
battery disposal section).
10. Do not crush, cut, pull or expose charging adapter cords to
extreme heat.
Do not disassemble the charger. Take it to an authorised
service centre when service or repair is required. Incorrect
re-assembly may result in the risk of fire, electric shock or
electrocution.
11. Keep charging adapter cords away from sharp edges.
12. Position charge adapter cords so that they do not become
entangled or become a safety hazard.
13. Do not shine spotlight in eyes.
14. Do not operate while recharging.
Download from Www.Somanuals.co6m. All Manuals Search And Download.
•
To reduce the risk of an electric shock, unplug the charger
from the power supply before attempting to clean it.
•
•
Never attempt to connect two chargers together.
Do not store or use the tool and battery pack in locations
where the temperature may reach or exceed 104°F (40°C)
such as alongside sheds or metal structures in the summer.
•
The charger is designed for use from a standard household
electrical supply (230–240 volts). Do not attempt to connect
the charger to a supply with a different supply.
Download from Www.Somanuals.co7m. All Manuals Search And Download.
Know your product
1. Trigger switch
2. Trigger switch lock
3. Quartz halogen bulb
4. Rubber bezel
5. AC/DC recharge po
6. LED Indicator
7. LED Indicator Switc
8. Pistol grip handle
9. Lanyard
10. DC charge adapte
11. AC charge adapte
5
7
6
3
1
4
2
8
5
9
11
10
Download from Www.Somanuals.co8m. All Manuals Search And Download.
4. Turn off the charger power supply from the main. Disconnect
the barrel connecter from the recharge port (5). Wait 5
minutes before use. Store adaptor in a safe place.
Unpacking
Due to modern mass production techniques, it is unlikely that
your GMC Power Tool is faulty or that a part is missing. If you
find anything wrong, do not operate the tool until the parts have
been replaced or the fault has been rectified. Failure to do so
could result in serious personal injury.
Do not overcharge – Charge until LED light green status (max
15 hours).
Important. Do not operate when charging.
DC power charging
CAUTION. Use only with DC ChargingAdapters that are
approved with unit.
Operation
It is recommended that for first time charging, you charge your
spotlight using theAC power adaptor.
Important. The DC source (jump starter, battery pack, vehicle
accessory socket, etc.) must be 12 Volt DC and should be able
to supply at least one half Amp at 12 VDC for 10 hours.
Important. For first time operation of spotlight, the average
charge time is 12-15 hours.
Charge time after first use is 12-15 hours.
Important. Before you begin charging, ensure that the spotlight
trigger switch (1) is in the off position.
If unit is not used for two months, it is suggested the battery be
recharged for approx 4 hours and repeated every 2 months of
non use.
1. Plug the DC fused recharge adapter (10) into the recharge
port located in front of the trigger switch (5).
Important. Do not charge withAC and DC chargers at the
same time.
2. Insert the power plug into the accessory socket of your power
source. The LED indicator (6) will show power and that
charging is taking place.
AC power charging
CAUTION. Use only withAC ChargingAdapters that are
approved with unit.
3. Charge for approximately 15 hours max or until the green
LED is lit.
Important. Before plugging in the power supply from the
charger to the spotlight always ensure that the plug is switched
off at the main as well as the spotlight and trigger switch is in the
off position.
4. Disconnect charger from power supply. Unplug the barrel
connecter from the recharge port (5) Wait 5 minutes before
use. Store adaptor in a safe place.
Do not overcharge – Charge
until LED light green status.
1. Connect the power supply from
the charger to the spotlight via
the barrel connecter. Plug into
the recharge port socket located
in front of the trigger switch (5).
DO NOT charge for more than
15 hours with DC charger.
NOTE. Some vehicles must
have the ignition switch
on to power the vehicle
accessory outlet.
2. Plug in the charger and
switch on. The LED indicator
(6) will show power and
that charging is taking place.
3. Charge for approximately
12-15 hours maximum
or until the green LED is lit.
Download from Www.Somanuals.co9m. All Manuals Search And Download.
LED indicators
Replacing the spotlight
The spotlight has 3 LED indicators (6) which indicates battery
level when in operation and status
whilst charging.
To replace the H3 type 6V bulb you will need a small Phillips
type screwdriver and a replacement bulb (GMC Part VEC117-
AUBUL).
First red LED indicates battery is in
a low level of charge.
Bulb life may be shortened by installing a bulb with dirt or
fingerprints on it. The bulb can be wiped clean with a cloth
moistened with alcohol. During bulb installation, avoid touching
the glass part of the bulb
Second red LED indicates battery is
partially charged.
1. Disconnect the unit from charging adapter.
Green LED indicates battery is fully
charged.
2. Pull backward the rubber bezel away from the front of the
spotlight to reveal two small Phillips screws in the Retaining
Ring (fig. C).
To turn the LED on and off, depress
the LED Indicator Switch (8)
3. Using the screwdriver, remove (counter-clockwise) the two
screws and set them aside (fig. D).
Using the spotlight
The Spotlight has a digital electronic control dimmer with three
levels of brightness.
4. Lift off the retaining ring, glass lens and rubber “O” ring and set
them aside (fig. E & F).
Depressing the trigger switch (1)
advances the brightness of the
spotlight to dim, brighter, brightest
(fig. A). This allows the user to set
the desired brightness of the light.
Depressing trigger at one second
intervals to allow the internal circuits
to set to the next level. Lower
brightness operation extends the
run time.
A
B
C
E
D
The Trigger Switch may be locked
in the ON position (fig. B) to provide
continuous light at any level without
continuously depressing the Trigger
Switch.
To lock trigger switch slide trigger
switch lock upwards. This can be
done in the on or off position. To
release lock, slide lock downwards.
F
10
Download from Www.Somanuals.com. All Manuals Search And Download.
N
M
G
H
J
14. Reassemble in reverse order.
15. Operate switch to ensure proper operation of spotlight
(fig. N).
Replacing the battery pack
The Sealed LeadAcid Battery has a life of several years, if
recharged promptly after each use. When a fully charged battery
only provides about five minutes or less of spotlight operation, it
should be replaced with a new one.
I
To replace the battery you will need the GMC Part VEC117-AUBAT.
WARNING. DO NOTALLOW BARE CONNECTORS TO
CONTACT EACH OTHER DANGEROUS SPARKING
CAN OCCUR.
NOTE. WHICH WIRESARE ON THE BATTERYTERMINALS
L
K
CAUTION. Incorrectly connected wires will not allow the spotlight
to operate. Incorrect battery polarity will damage the circuits inside
the spotlight. Double check battery polarity before reassembly!
5. Carefully remove the reflector and bulb assembly (fig. G).
6. Disconnect the bulb wire from the red power wire (fig. H).
7. Unsnap the hairpin retaining wires from the reflector’s flange
(fig. I).
8. Using the screwdriver, loosen the retaining screw to remove
the bulb from the reflector (no need to completely remove this
screw).
9. Lift out the bulb and the attached wire (fig. J).
10. Insert the replacement bulb into the reflector’s flange.
11. Put back and secure the hairpin retaining wires (fig. K).
12. Connect the white bulb power wire to the red power wire
(fig. L).
13. Tighten the retaining screw on the flange (fig. M).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the DC fuse plug
Maintenance
Store the spotlight, instruction manual and where necessary the
accessories in the original packaging.
In this way you will always have all the information and parts
ready to hand.
The fuse in the DC plug (10) protects the charging circuit of the
DC RechargeAdapter. If theAC recharger operates but the DC
charging adapter does not, then the fuse may be opened. To
replace the fuse:
Do not throw used batteries into fire or water. There is a danger
of explosion! Please hand in non-working or used batteries, or
tools with built-in batteries, to the environmentally-safe disposal
unit at a municipal waste-disposal centre, or to your dealer.
1. Unscrew the end cap of the
DC Plug.
2. Remove spring center contact
and fuse.
Important. All batteries lose charge over time, especially when
they are warm. AC recharge is recommended every two months,
when not in frequent use. Use theAC recharger and charge for
the recommended time.
3. Check fuse with a continuity
checker.
1
4. If blown, locate replacement
fuse with same type and rating
(0.5A)
If the unit has dirt on it, gently clean the outer surfaces of the
spotlight unit with a soft cloth moistened with a mild solution
of water and detergent. Periodically inspect the condition
of recharge adapters, connectors, and wires. Replace any
components that may have become worn or broken.
5. Replace the fuse, spring,
contact and end cap.
6. Screw end cap clockwise
until it is finger tight.
DO NOT OVER-TIGHTEN
7. Check for proper operation of
DC ChargerAdapter.
2
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
Before returning this product for a Warranty Claim or any other reason
Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand)
When you make your call, please have the following information at hand:
GMC Product Type GMC Product Code
A GMC Service Engineer will take your call and, in most cases, will be able to
solve your problem over the phone.
You are welcome to use this phone-in service to make suggestions or give
comments about any GMC product.
With continuing product development changes may have occurred which render
the product received slightly different to that shown in this instruction manual.
The manufacturer reserves the right to change specifications without notice.
Note: Specifications may differ from country to country.
Helpline 1300 880 001 (Australia) or 0800 445 721 (New Zealand)
The GMC 777 Helpline operates from 7am to 7pm, 7 days a week (EST). This allows you to contact
GMC directly with any queries and technical questions you have regarding products.
Save this Manual for future reference
GMC Head Office:
45-55 South Centre Road, Melbourne Airport, Victoria, Australia 3045
Telephone (03) 8346 1100 Fax (03) 8346 1200
Download from Www.Somanuals.com. All Manuals Search And Download.
|