190cc 460
MULCH/C
PETROL LA
RLMC
INSTRUCTION MANUAL (1
Code: RLMC IM
Date: 080709
Black
Cyan
Magenta
Yellow
Edition: 5
Op: DCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Description of symbols
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Conforms to relevant standards
for electromagnetic compatibility.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Wear safety footwear.
Wear safety gloves.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Warning.
Read these instructions for use carefully.
Environmental protection
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
Use at a distance of at least 15m
from other people.
Thrown objects and rotating blades
can cause severe injury.
Noise label rating 75dBA
(taken at 7.5 meters) you must wear
Explosive material.
��
ear protection at all times.
���������
Extremely hot surface. Do not touch a hot muffler,
gear box or cylinder, you may get burned. These
parts get extremely hot from operation and remain
hot for a short time after the unit is turned off.
CAUTION. Before carrying out any operation stop
the engine and disconnect the spark plug cap.
CAUTION. Risk of hand and feet injuries.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
can affect his ability to react and concentrate.
Specifications
Engine Capacity:
Fuel Type:
• Remember that the operator or user is responsible
for accidents or hazards occurring to other people
or their property.
190cc
Unleaded
Preparation
Oil Type:
4 Stroke Motor Oil
• While mowing, always wear sturdy footwear and long
trousers. Do not operate the equipment when barefoot
or wearing open sandals.
Engine:
Briggs & Stratton 190cc,
4 Stroke
0 – 3000min-1
Speed:
• Thoroughly inspect the area where the equipment is to be
used and remove all objects which may be thrown by the
machine or damage the cutter assembly and the engine
(stones, sticks, metal wire, bones, etc.)
Width of cut:
18" 460mm
Blade:
1 Mulch Blade
10 Levels, 15 – 70mm
60L
• WARNING: DANGER! Engine fuel is highly flammable:
Height adjustment:
Grass catcher capacity:
Equivalent spark plugs:
– Store fuel in containers specifically designed for this purpose.
– Refuel using a funnel and outdoors only. Do not smoke
while refuelling or whenever handling the fuel.
CHAMPION - RJ19LM
DENSO - W9LMR-US
NGK - BR2LM
– Add fuel before starting the engine. Never remove
the cap of the fuel tank or add fuel while the engine is
running or when the engine is hot.
Weight:
32kg
– If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until the fuel has
evaporated and the vapour dispersed.
Noise label rating 75dBA (taken at 7.5 meters) you must wear ear
protection at all times.
Safety rules for petrol lawn mowers
Training
• Read the instructions carefully. Get familiar with the
controls and proper use of the equipment.
• Only use the lawn mower for the purpose for which it was
designed, i.e. for cutting and collecting grass. Any other
use can be hazardous, causing damage to the machine.
– Replace all fuel tanks and containers caps securely.
• Substitute faulty silencers.
• Before use, always inspect the machine, especially the
condition of the blades, and check that the screws and
cutting assembly are not worn or damaged. Replace worn or
damaged blades and screws in sets to preserve balance.
• Discharge openings must be guarded at all times. Do not
remove the discharge guard or hold it up while mowing.
• Never allow children or people unfamiliar with these
instructions to use the lawn mower. Local regulations may
restrict the age of the operator.
• It is advisable to wear suitable eye protection when
operating the mower.
• Never use the lawn mower:
– When people, especially children, or pets are nearby.
– If the operator has taken medicine or substances that
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Stop the engine and disconnect the spark plug wire:
Operation
– Before carrying out any work underneath the cutting deck
or before unclogging the chute;
• Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
– Before checking, cleaning or working on lawn mower;
• Mow only in daylight or good artificial light.
• If possible, avoid operating the equipment in wet grass.
• Always be sure of your footing on slopes.
– After striking a foreign object. Inspect the lawn mower for
damage and make repairs before restarting and operating
the lawn mower;
• Walk, never run and do not allow yourself to be pulled
along by the lawn mower.
– If the lawn mower starts to vibrate abnormally (find and
remove the cause of the vibration immediately).
• Mow across the face of slopes, never up and down.
• Exercise extreme caution when changing direction on slopes.
• Do not mow on slopes of more than 20°.
• Stop the engine:
– Whenever you leave the lawn mower unattended.
Remove the key from models with electric starters.
• Exercise extreme caution when pulling the lawn-mower
towards you.
– Before refuelling.
– Every time you remove or replace the grass-catcher.
• Stop the blade if the lawn mower has to be tilted for
transportation when crossing surfaces other than grass,
and when transporting the lawn mower to and from the
area to be mowed.
• Reduce the throttle before turning off the engine and turn
the fuel off when you have finished mowing, following the
instructions in the engine handbook.
• When mowing, always keep to a safe distance from the
rotating blade. This distance is the length of the handle.
• Never operate the lawn mower with defective guards, or
without safety devices, such as the stoneguard and/or
grass-catcher, in place.
• Never cut grass while walking backwards.
• Stop the engine before pushing mower across gravel
drives, walks or roads.
• Do not change the engine governor settings or over
speed the engine.
Maintenance and storage
• On power-driven models, disengage the drive clutch
before starting the engine.
• Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition. Regular
maintenance is essential for safety and performance.
• Start the engine carefully, following the instructions and
keeping feet well away from the blade.
• Never store the equipment with fuel in the tank inside a
building where vapour may reach a flame or a spark or
a source of extreme heat.
• Do not tilt the lawn mower when starting the engine.
Start the engine on a flat surface that is free of obstacles
and tall grass.
• Allow the engine to cool before storing in an enclosed
space.
• Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
• To reduce the fire hazard, keep the engine, exhaust
silencer, battery compartment and fuel storage area
free of grass, leaves, or excessive grease. Do not leave
containers with grass cuttings in rooms.
• Never pick up or carry a lawn mower while the engine
is running.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• Check the stone-guard and grass-catcher frequently for
wear and deterioration.
• If the fuel tank has to be drained, this should be done
outdoors and when the engine is cool.
• Wear strong work gloves when removing and
reassembling the blade.
• Check the blade’s balance after sharpening.
• For reasons of safety, do not use the equipment with
worn or damaged parts. Parts are to be replaced and
not repaired. Parts that are not of the same quality can
damage the equipment and be dangerous for your safety.
• Whenever the machine is to be handled, transported or
tilted you must:
– wear strong working gloves;
– grasp the machine at the points that offer a safe grip,
taking account of the weight and its distribution.
• Damaged blades and worn bolts are major hazards.
Contents of carton
• Handle bar locking knobs, with bolts and washers x 2
• Catcher
• Mulcher plug
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Know your product
1. Handle bar
2. Lower handle
1
3. Throttle lever
14
4. Discharge guard
5. Grass catcher
6. Height adjustment lever
7. Fuel tank cap
3
8. Oil filler cap
9. Recoil starter
10. Spark plug cap
11. Air filter
2
12. Primer bulb
13. Handle bar locking knob
14. Brake lever
13
9
8
4
15. Mulcher plug
7
5
11
12
15
6
10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Release the discharge guard
to secure the catcher in place
between the 2 ribbed locking
notches (Fig. 3).
Unpacking
3
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
Note. Always empty the catcher
before it has reached maximum
capacity, otherwise it will decrease
the performance of the mower.
Note. Make sure that two people are used to remove the
mower from the box. Have two people at opposite ends
lifting from the bottom of the mower.
Attaching the handles
It is necessary to attach both the lower handle and
handle bars.
Assembly
It is necessary to fit the lower handle (2), handle bar (1),
and catcher (5) to the mower.
Note. Uncut the cable ties connecting the handle to the
mower before you start.
Assembling the catcher
1. To attach the lower handle,
first use a spanner to
remove the 4 bolts.
The grass catcher (5) is supplied
in two sections. Locate the top
half on top of the bottom half
and interlock them together by
aligning the lugs and slots and
pushing the halves together until
they click into place.
2. Place the lower handle in
position (inside the bolt
brackets) and replace the 4
bolts, from outside in. Use the
spanner to retighten the nuts.
Attaching the catcher
3. To attach the handle bar, first remove the two handle
bar locking knobs (13).
1. Lift the discharge guard (4) in order to position the
catcher.
2. While lifting the discharge guard, slide the catcher into
position in a downwards direction (Fig. 1).
1
2
4. Position the handle bar over the lower handle and
insert the two locking knobs, and tighten to secure the
handles together.
3. Push the catcher down until it locks into place (Fig. 2).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Cutting height adjustment
Brake lever
The GMC mower has one lever
to easily adjust the cutting height.
There are 10 height settings.
The mower is equip with a brake
lever (14) to improve the safety of
the mower.
1. To decrease the cutting height
pull the height adjustment
lever (6) out and move it up a
notch, towards the handlebar.
During operation the brake lever
must be held, if it is let go the
engine will automatically stop.
To start the lawn mower you
must hold the brake lever to the
handle bar.
2. To increase the cutting height
pull the lever out and move it
down a notch, towards the motor.
Fuelling
Note. Use fresh unleaded petrol.
1. Unscrew the fuel tank cap (7)
and pour the unleaded petrol
into the tank with the aid of
a funnel.
Note. If you are unsure of which cutting height to use,
begin with a high setting and trial a small section of lawn,
then check the appearance of the lawn. Then readjust if
necessary.
Inserting the mulcher plug
WARNING. When inserting the mulcher plug ensure that
the mower is turned off and the blades are at a stand still.
2. Fill the tank to approximately
2.5 cm below the lowest
portion of the neck to allow
for fuel expansion.
1. Make sure the mower is steady by placing one knee in
front of the back wheel.
Be careful not to over fill.
2. Whilst lifting up the discharge
guide place the mulcher
3. Be careful not to spill any petrol, if this happens, wipe the
spill with a clean rag.
plug into the opening at a
downward angle. When the
plug has got to a point where
it can not go in any further
place the mulcher plug flat and
square it up with the right side
of the mower, ensuring it is
flush and locked into the right
hand side.
4. Start the engine at least three meters away from the area
where the fuel tank has been filled in order to avoid the
risk of fire.
WARNING. Never attempt to refuel the engine while it is
running or still warm, allow it to cool before fuelling.
Note. For further information refer to the Fuel
Recommendations section in the Briggs & Stratton
instruction manual.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Disengage the brake by pulling the brake lever (14)
toward the handle. Letting go of the lever will prevent the
mower from starting or will stop the engine, if running.
Checking the oil
CAUTION. The lawn mower is shipped without oil. Do
not start your lawn mower before ensuring it has been
filled with the right amount of correct grade oil. Refer to
the oil recommendations section of the Briggs & Stratton
instruction manual for this information.
4. While holding the brake lever inward pull the recoil starter
(9) lightly until you feel resistance then pull quickly until
the engine starts. Do not pull the cord with a jerk or
release it until fully rewound.
1. Move the lawn mower to a
level surface and clean around
the oil filter cap (8) .
2. Remove the oil filter cap with
dipstick and wipe it with a
clean cloth. Replace it and
retighten the cap.
3. Remove the dipstick again and
check the oil level, the oil should
be at the full mark.
5. Once the lawn mower has started and warmed up move
the throttle lever to the Run position while continuing to
hold the brake lever.
4. If oil is required add it slowly
(the oil capacity is about
0.6 litre), do not over fill.
Stopping the engine
To stop the engine reduce
5. Retighten the oil filter cap firmly
before starting the engine.
Cold Start
the speed of the engine by
Run
Starting the engine
Note. Before starting the mower check the oil and fuel levels.
Note. Ensure that the spark plug RJ19LM is fitted before
starting the mower.
pulling the throttle lever (3)
towards the tortoise and
release the brake lever
(14). In an emergency just
release the brake lever.
Hot
Start
1. Move the throttle lever (3) to the cold start position.
Mowing advice
Cold
Start
Cold Start
1. It is recommended to use the fast throttle setting and
keep the engine running at maximum speed. This will
deliver the best cut and increase engine life. If the speed
of the engine slows this could indicate the mower is being
overloaded, by trying to cut to much grass. Try mowing a
narrower strip, mowing slower or raise the cutting height.
Run
Hot
Start
2. Before you begin mowing always check and clear the
grassed area for all foreign objects. Especially solid ones
that can be semi concealed in the ground such as rocks,
stumps and garden stakes.
2. Push the primer bulb firmly 5 times (for initial starting) or
3 times (for engine starting thereafter).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Sharp blades cut cleanly and efficiently, if the blade is dull
it will tear the grass. This will result in the ends turning
brown. When the blades no longer cut cleanly either
sharpen them or replace them.
13. If the blades do come into contact with something or the
mower starts to vibrate stop the engine immediately,
remove the spark plug lead and inspect to see if there
is any damage.
4. To safely operate the mower ensure all four wheels are
on the ground and be careful not to loose your footing
or control of the mower. Be very careful when mowing
uneven or rough ground. Keep a firm grip on the handle
bar at all times, always walk, never run with the mower.
Emptying the grass catcher
To remove the catcher, raise the guard while lifting the
catcher to dislodge it from the hooks.
Do not leave clippings in the catcher for extended periods.
WARNING. Check the catcher frequently for cracks and
wear and replace it if damaged.
5. For healthier and greener grass do not cut it too short.
This can cause damage to the grass and allow weeds
to develop. Short grass will also require more watering.
Maintenance
CAUTION. Before making any adjustment or maintenance
procedures to the mower ensure it is turned off and the
spark plug lead is removed.
WARNING. It is important that when the mower is tipped
backwards the spark plug is highest in the air. Failure to do
so will mean that oil will travel into other internal areas, this
can cause the mower to have difficulty starting, excessive
smoke and oil leaks. Such occurrences are not covered
under warranty.
6. Vary your cutting pattern from week to week, this will
help to prevent matting and graining of the grass.
7. Before checking a clogged mower deck stop the engine
completely and disconnect the spark plug lead and then
tilt the mower so the air filter side is facing upwards.
Use a stick the clear any clogged material, never use
your hands.
8. Mowing wet grass should be avoided. Wet grass will tend
to stay flattened by wheels and not actually cut it. It will
also clog the mower deck and if it is slippery you may
loose your footing.
Changing the mower blade
WARNING: Stop the engine and unplug the spark plug
before any repairs or maintenance operations.
The blade is made of pressed steel. In order to obtain a
clean cut, sharpen the blade periodically after every 25
hours of use. Ensure that the blade is always well balance.
A badly balanced blade can involve harmful vibrations and
may cause injury.
9. Always mow across slopes not up and down them.
Be extra careful if the grass is wet as this could cause
you to slip and loose control of the mower.
10. If the ground is to dry, mowing will stir up a lot of dust
which may clog the air filter. It is recommended you
check and clean the air filter straight after mowing.
11.Use the side of the mower as a guide to cut close to
large objects such as a fence or a wall. Be careful when
mowing over obstacles embedded in the lawn such as
sprinkler systems and paving, avoid anything that sticks
up above the surface of the lawn.
WARNING. Never carry out any assembly operations or
adjustments with the engine running.
1. Periodically check the blade for nicks and dull cutting
edges and have it sharpened if needed.
Note. The blade should be sharpened and balanced by
an authorised repair centre.
12. Avoid mowing over loose stones, gravel and other
landscaping material as this can be picked up by the
mower and flung out causing serious personal injury.
2. If there are rounded or broken ends, thinned metal or
other damage, replace the blade.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3. With the engine switched
off, lift the front of the mower
upwards so the handle bar sits
on the ground and the spark
plug faces upwards.
Note. Improper tipping may
affect engine performance.
4. Put on a pair of sturdy gloves
to protect your hands.
5. Block the rotation of the
blade and use a spanner
(not supplied) to unscrew the
blade bolt in an anti-clockwise
direction (viewed from
underneath).
6. Replace the blade and screw
in the blade bolt, tightening
it with a spanner (not supplied).
Note. When reassembling the blade, ensure the cutting
edges face in the direction of the engine rotation.
7. Return the mower to the upright position.
8. Start the engine and allow the mower to run for a few
minutes to check that the blade is properly fitted and that
there is no undue noise or vibration. Use only the blade
as recommended by the manufacturer.
For all engine maintenance information refer to the
Briggs & Stratton instruction manual.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GMC customer assist
If your product needs repairing or you simply need help
or advice, please contact us on our Customer Assist Line
1300 880 001 (Australia) or 0800 445 721 (New Zealand).
For prompt service we suggest you log your service request
access to the Internet, please contact our service department
on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).
7am –7pm, 7days a week (AEST).
Please note that if repair is required, you must
provide a valid original purchase receipt.
You will need the following details at hand to log your service request;
Personal details: First & Last name, address, pick up address,
contact phone numbers, email address
Product details: Product number, date of purchase, retailer bought from,
State & postcode, receipt number, reason for the request,
copy of official purchase receipt
Attach your purchase receipt and save with this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|