BTS Touch Sensitive Switch
Installation Instruction
Specifications
BTS-486
Relay output
Relay output
(Touched)
(Touched)
Specifications
Com. N. C.
Com. N. O.
Setting JP
1
30
1
2
3
4
5
SPDT relay rating: 3A@ 125V~
Current: 60mA~100mA@12V DC
Power input :12~24 V DC
Relay output
Relay output
Com. N. O.
Com. N. C.
Operating Temper.: - 20~+70ºC
JP setting:
(Light is lighting)
JP1: Relay output model
JP2: LED lighting or blinking setting
Jp3~5: LED brightness setting
(Light is blinking.)
Relay
(Red)
(Green)
(Touched)
BTS-300 , 400-ANSI
(Green)
(Red)
(Touched)
(Touched)
Relay contact output
(free voltage contact)
(Green)
Relay
12~24VDC power input
(Green)
(Touched)
Setting JP
Timer delay
(Seconds)
Relay output model
control and LED
brightness setting
(Red)
(Touched)
(Touched)
1
30
(Red)
Connecting Diagram
Control Device(Outdoor)
N.C.
Relay output
Fig. A
BTS-200 adds an extra
trigger for remote control
purpose; it has the same
effect as touching motion.
Com.
control
N.O.
T h e d i a g r a m s b e l o w i l l u s t r a t e t h e t w o
recommended ways of installing the BTS Touch
Sensitive Switch and access control devices after
power input (power on).
TR
TR
(Trigger)
Locking Device
(fail-safe)
N.C.
Com.
Power Supply
N.O.
Shorten
In Fig. A, BTS directly controls the release of fail-
safe(Power to Lock) locking device.
BTS Touch Sensitive Switch
(Indoor)
Control Device(Outdoor)
N.C.
Relay output
Fig. B
BTS-200 adds an extra
trigger for remote control
purpose; it has the same
effect as touching motion.
Com.
control
N.O.
TR
TR
In Fig. B, For fail-secure(Power to Unlock) locking
(Trigger)
devices the contact on control device should be sat
to N.O. The relay time of BTS is the same as the
release time of locking device in both cases.
Locking Device
(fail-secure)
N.C.
Com.
Power Supply
N.O.
Shorten
BTS Touch Sensitive Switch
(Indoor)
IMPORTANT NOTICE:
1. It is important to take extra notice on the maximum voltage and current output that the rated of relay contact to be used.
2.Make sure that the "+" and "-" wire are connected correctly.
Copyright © 2008 GIANNI INDUSTRIES, INC. All rights reserved.
P-MU-BTS200 Ver. L Published on 2008.06.09
Download from Www.Somanuals.com. All Manuals Search And Download.
|