Proximity Reader
RD-100M
Standard Wiegand 26 bits output
Mifare 1K compatible
Electronics potted with epoxy compound applications
Compatible with all Wiegand access controllers
Suitable for fully weatherized indoor/outdoor
Fit any standard single gang electrical box
Specifications
Operating Voltage: 7~12 Vdc
Current Draw: Average 110mA, Peak 140mA @ 12Vdc
Transmitting Frequency : 13.56 MHz (Mifare 1K compatible.
Code Processing: Check card serial number reading only
Output Format: Wiegand 26-bit hexadecimal
Read Range: 5~7 cm )Depending on local installation
conditions(
Case Material: ABS )UL94V0(
Colour: Dark gray
Operating Temperature: -10~+55°C
Ambient Humidity: 0~95% relative humidity non-condensing
Visual Signals: Bi-color)Red/Green(
EMC: Meet CE requirement
Cable: 6 conductor (#24 AWG) stranded with shield for
Typical Wiegand installation
Statement
The RD-100M Mifare Proximity Reader is suitable for
remote locations used in conjunction with an on-line system. It
is designed to mount on a standard-single-gang electric wall
box or on the surface of an interior or exterior wall. The
electronics are potted with potting compound which protects
the reader from harsh environmental conditions.
This unit is compatible with Mifare1 Cards with operating
frequency of 13.56 MHz (HF) which is capable of reading any
the Mifare card s serial number. It supports Wiegand 26 bits
output Wiegand 26 bits that allows you to connect to any
Wiegand output controllers.
Dimension
Unit: mm
ANSI box
Red: +7~12Vdc
Black: GND
White: D1
Warranty
Green: D0
Blue: Beep
Yellow: LED
The product is warranted against defects in material and
workmanship while used in normal service for a period of
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
1
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
The products are manufactured under an ISO
9001
&
QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-RD-100M Ver. D Published on 2008.07.30
Download from Www.Somanuals.com. All Manuals Search And Download.
|