4x4 DVI Dual Link
Matrix
EXT-DVI-444DL
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1
2
3
4
5
6
7
9
Introduction
Operation Notes
Features
Panel Layout
Panel Descriptions
Connecting And Operating The 4x4 DVI DL Matrix
Configuring The 4x4 DVI DL Matrix
RS-232 Serial Control Interface
10 Rack Mount Installation
11 Specifications
12 Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Congratulations on your purchase of the 4x4 DVI DL Matrix. Your complete
satisfaction is very important to us.
Gefen
Gefen delivers innovative, progressive computer and electronics add-on solutions
that harness integration, extension, distribution and conversion technologies.
Gefen’s reliable, plug-and-play products supplement cross-platform computer
systems, professional audio/video environments and HDTV systems of all sizes
with hard-working solutions that are easy to implement and simple to operate.
The Gefen 4x4 DVI DL Matrix
Easily combine any four cross-platform Dual Link DVI video display outputs and
four Dual Link DVI digital displays without networking. Our 4x4 DVI Dual Link
Matrix provides a simple, reliable and highly effective method of creating multiple
Dual Link DVI display consoles, with each console capable of accessing any one
of the Dual Link DVI video sources at any time by remote control. You also have
the option of setting up the four displays locally or extending them with a Gefen
extender.
How It Works
The 4x4 DVI Dual Link Matrix has four Dual Link DVI inputs and four Dual Link
DVI outputs. You simply connect your four Dual Link DVI video sources to the
Switcher’s inputs, then connect your four Dual Link DVI displays to the Switcher’s
outputs.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION NOTES
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 4X4 DVI DL MATRIX
•
4x4 DVI DL Matrix does not have any scaling functionality. All of the attached
monitors must be able to display the attached sources’ resolution. For
maximum compatibility it is recommended that only one compatible/common
resolution for all displays be used by all sources.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Features
•
Increases your productivity by letting you view any four Dual Link DVI video
sources on any four Dual Link DVI displays
•
•
•
•
•
Maintains highest resolution digital video with no loss of quality
Discrete IR Remote (included)
Supports video resolutions up to 3840x2400
Supports DDWG standards for DVI monitors
Includes rack ears
Package Includes
(1) 4x4 DVI Dual Link Matrix
(1) RMT-16IR
(1) 5V DC Power Supply
(4) 6 Foot Dual Link DVI cables
(1) Set Of Rack Ears
(1) User’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL LAYOUT
Front Panel
1
2
3
4
5
6
7
Back Panel
8
9
10
11
12
13
14
15
16
17
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PANEL DESCRIPTIONS
1
2
3
4
Display 1 Selected Source LED
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 1 will be indicated by an
active LED.
Display 2 Selected Source LED
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 2 will be indicated by an
active LED.
Display 3 Selected Source LED
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 3 will be indicated by an
active LED.
Display 4 Selected Source LED
The array of 4 LED’s correspond to the 4 source inputs on the back panel of the 4x4 DVI DL
Matrix. The currently selected source being displayed on DVI Output 4 will be indicated by an
active LED.
5
6
7
8
9
IR Receiver
This IR receiver will receive commands from the included RMT-16-IR remote control.
IR Extension Port
Connect an optional IR extension (part# EXT-RMT-EXTIR) to this port.
Power LED Indicator
This LED will become active once the included 5V DC power adapter is properly connected.
RS-232 Serial Control Interface
Use the commands on page 10 to control the 4x4 DVI DL Matrix using the RS-232 interface.
DVI Input 1
Connect a DVI DL source to this input.
10 DVI Input 2
Connect a DVI DL source to this input.
11 DVI Input 3
Connect a DVI DL source to this input.
12 DVI Input 4
Connect a DVI DL source to this input.
13 DVI Output 1
Connect a DVI DL display to this port.
14 DVI Output 2
Connect a DVI DL display to this port.
15 DVI Output 3
Connect a DVI DL display to this port.
16 DVI Output 4
Connect a DVI DL display to this port.
17 Locking 5V DC Power Adapter Input
Connect the included 5V DC power adapter to this port.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING AND OPERATING THE 4X4 DVI DL MATRIX
How to Connect the 4x4 DVI DL Matrix
1. Connect up to 4 DVI DL sources to the 4x4 DVI DL Matrix input ports using
the supplied DVI DL cables.
2. Connect up to 4 displays to the 4x4 DVI DL Matrix output ports using user
supplied DVI DL cables.
3. Connect the supplied 5V DC power supply to the 4x4 DVI DL Matrix.
4. Power on the displays.
5. Power on each source individually ensuring that a display is pointing to it
while the power on procedure completes.
NOTE: It is extremely important to ensure that when each source is being
powered on it has a display pointing to it. Most sources require (a definite
requirement if computers are being used) a display to be attached to
receive EDID (display information) and to begin operation. If a source
does not have a display that is pointing to it, a video image may fail to be
displayed. It is recommended that each source be powered on and verified
that it is outputting video before moving on to power the next source.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE 4X4 DVI DL MATRIX
The 4x4 DVI DL Matrix has a bank of 8 configuration DIP SWITCHES. These
switches are located underneath the unit. Peeling back the black metallic sticker
on the bottom of the 4x4 DVI DL Matrix will reveal the Dip Switch bank. These
service switches are used for a number of configuration options. By default, all
Dip Switches are in the OFF position. Each setting is outlined below.
ON
OFF
1
3
5
7
2
4
6
8
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Switch 6
Switch 7
Switch 8
IR Remote Channel Configuration
IR Remote Channel Configuration
Automatic Link Selection \ Dual Link Only Mode
Not Used
Pre-Empahsis For Display Output 1
Pre-Empahsis For Display Output 2
Pre-Empahsis For Display Output 3
Pre-Empahsis For Display Output 4
IR REMOTE CHANNEL CONFIGURATION
Dip Switches 1 and 2 relate to the IR remote control channel that is used by the 4x4
DVI DL Matrix and RMT-16-IR remote control. Dip Switch 1 and 2 on the 4x4
DVI DL Matrix must match Dip Switch 1 and 2 on the RMT-16-IR remote control.
Please view the table below to set the channel on 4x4 DVI DL Matrix and IR
remote control. The remote channel for the RMT-16-IR is located underneath it’s
battery cover.
RMT-16-IR REMOTE CONTROL
4x4 DVI DL Matrix
Remote Channel 1:
Default
Remote Channel 1:
Default
Remote Channel 2:
Remote Channel 2:
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
Remote Channel 3:
Remote Channel 3:
Remote Channel 4:
Remote Channel 4:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE 4X4 DVI DL MATRIX
AUTOMATIC LINK SELECTION / DUAL LINK ONLY MODE
The 4x4 DVI DL Matrix has the ability to run both Single Link and Dual Link DVI
sources. There is a feature that will either automatically select the link mode, or lock
the unit in Dual Link mode. By default, Dip Switch 3 is in the OFF position (Automatic
Link Selection). Turning Dip Switch 3 to the ON position will lock the unit in Dual Link
mode and will only allow Dual Link signals to pass properly.
PRE-EMPHASIS
Pre-Emphasis is used to help extend a signal travel over a distance of cable. When
a DVI cable connected to a display is over a long cable, it is recommended that
Pre-Emphasis be enabled. Pre-emphasis is enabled by default on all display
outputs. For short cables, disable pre-emphasis on each output by turing it’s
corresponding Dip Switch to the ON position. If any type of extension device is
used pre-emphasis must be disabled for proper operation.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232 SERIAL CONTROL INTERFACE
1 2 3 4 5
1 2 3 4 5
6 7 8 9
6 7 8 9
Only Pins 2 (RX), 3 (TX), and 5 (Ground) are used on the RS-232 serial interface
Binary Table
ASCII Corresponding
RMT16-IR
Binary
ASCII Corresponding
RMT16-IR
Binary
Button
Button
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
0011 0001
0011 0010
0011 0011
0011 0100
0011 0101
0011 0110
0011 0111
0011 1000
9
a
b
c
d
e
f
9
0011 1001
0110 0001
0110 0010
0110 0011
0110 0100
0110 0101
0110 0110
0110 0111
10
11
12
13
14
15
16
g
RS232 Settings
Bits per second ................................................................................................. 19200
Data bits .................................................................................................................... 8
Parity .................................................................................................................. None
Stop bits .....................................................................................................................1
Flow Control ....................................................................................................... None
9
Download from Www.Somanuals.com. All Manuals Search And Download.
RACK MOUNT INSTALLATION
Rack mount ears are provided for installation of this unit into a 1U rack mount
space.
1. Locate the side screws on the unit.
2. Remove the front 2 screws that are located closest to the front of the unit.
3. Using the removed screws, screw the rack mounting bracket into the unit.
4. Repeat the procedure on the opposite side of the unit.
1
Front of unit
Rear of unit
2
3
4
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Video Amplifier Bandwidth ................................................................. 2 x 165 MHz
Input Video Signal .............................................................................. 1.2 Volts p-p
Input DDC Signal ......................................................................... 5 Volts p-p (TTL)
Dual Link Maximum Video Range ........................................................ 3840x2400
DVI Connector .................................................... DVI-I 29 pin female (digital only)
Power Supply .............................................................................................. 5V DC
Power Consumption ....................................................................... 20 Watts (max)
Dimensions ..................................................................... 17”W x 1.75”H x 5.875”D
Rack Mountable ............................................................................ 1U Rack Space
Shipping Weight .......................................................................................... 10 Lbs
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|