Gefen Home Theater System PRO I User Manual

®
A
/V
Cinema Scaler  
Pro I  
EX
T
-
A
V
CINEMAAA  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
1
Introduction  
2
3
Operation Notes  
Features  
4
Panel Layout  
5
6
7
Panel Descriptions  
Panel Descriptions  
Front Panel Buttons  
7
Navigation  
7
9
9
Input Selection  
Using The A/V Cinema Scaler Pro - Main LCD  
LCD Screen  
10  
10  
12  
12  
13  
14  
14  
15  
15  
15  
16  
17  
17  
18  
18  
19  
20  
A/V Cinema Scaler Pro - Initial Startup  
Powering On  
A/V Cinema Scaler Pro - Main Screen  
Main Display  
Input Resolutions  
Audio Input Type  
Audio Formats  
Sampling Rates  
Number Of Channels  
Output Screen  
Surround Processing  
Dynamic Range Compression  
Reference Level Compensation  
DVI Output Type  
HDMI EDID Type  
Audio Input Type  
Product Title  
21 A/V Cinema Scaler Pro - Conguration  
21  
22  
23  
24  
25  
25  
25  
26  
26  
28  
29  
29  
29  
30  
30  
30  
31  
32  
33  
Main Features Menu  
A/V Cinema Scaler Pro - Picture Adjust  
Mode  
Contrast  
Brightness  
Hue  
Saturation  
Sharpness  
Aspect Ratio  
Noise Reduction  
Horizontal Position  
Vertical Position  
Clock  
Phase  
Exit Picture Adjust  
A/V Cinema Scaler Pro - Color Adjust  
Color Temp  
Red  
Green  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
33  
33  
34  
34  
34  
35  
35  
36  
36  
36  
37  
37  
38  
38  
38  
39  
40  
40  
40  
41  
41  
Blue  
Exit Color Adjust  
A/V Cinema Scaler Pro - Lipsync Delay Adjust  
Lipsync Delay  
Exit Lipsync Adjust  
A/V Cinema Scaler Pro - Surround Delay Adjust  
Surround Right Delay  
Rear Surround Right Delay  
Rear Surround Left Delay  
Exit Lipsync Adjust  
A/V Cinema Scaler Pro - Output Selection  
Output Timing 1080P  
Output Timing 2K  
Exit Output Selection  
A/V Cinema Scaler Pro - On Screen Display Adjust  
Horizontal Position  
Vertical Position  
Timeout  
Background  
Exit OSD Adjust  
A/V Cinema Scaler Pro - Firmware  
42 DB-25 Audio Input & Bypass Mode  
42  
42  
A/V Cinema Scaler Pro - DB-25 Audio Bypass Mode  
Enabling Bypass Mode  
43 Analog Input And Output Pinout  
44  
44  
Analog DB-25 Output  
Analog DB-25 Input  
45 RS-232 Serial Control Interface  
45 RS-232 Settings  
46 RS-232 Serial Control Commands  
48 Rack Mount / Tabletop Installation  
49 Specications  
52 Warranty  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Congratulations on your purchase of the A/V Cinema Scaler Pro. Your complete  
satisfaction is very important to us.  
Gefen  
Gefen delivers innovative, progressive computer and electronics add-on solutions  
that harness integration, extension, distribution and conversion technologies.  
Gefen’s reliable, plug-and-play products supplement cross-platform computer  
systems, professional audio/video environments and HDTV systems of all sizes  
with hard-working solutions that are easy to implement and simple to operate.  
The Gefen A/V Cinema Scaler Pro  
The Gefen Cinema Scaler is a video and audio device that can accomplish a  
unique variety of video scaling and audio conversion tasks. Any signal can be  
scaled and displayed with total end user control. An On-screen display (OSD)  
and full featured settings allow you to ne-tune your viewing experience and get  
the most out of your current A/V setup.  
How It Works  
Simply connect your analog or digital A/V sources to the Gefen Cinema Scaler.  
Using the OSD menu system and controls, select your desired input and  
resolution, audio processing needs, and other adjustments. The Cinema Scaler  
will brilliantly scale your image to your digital cinema projector or DVI /HDMI  
display.  
Note: This unit is fully HDCP compliant.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION NOTES  
READ THESE NOTES BEFORE INSTALLING OR  
OPERATING THE A/V CINEMA SCALER PRO  
Audio from the analog DB-25 input is available in bypass mode only. No  
video will be output when using the bypass mode.  
Audio connection for each input is selectable between analog and digital.  
Selection of the audio input type is selectable using the front panel LCD  
menu system. For more information please see page 18.  
Coaxial/Optical Digital Audio Format Support  
2 Channel LPCM:  
Multi-Channel AC-3  
32kHz – 96kHz  
1-6 Channels Bitstream  
HDMI Digital Audio Format Support  
2 Channel LPCM  
Multi-Channel AC-3  
8 Channel LPCM  
32kHz – 96kHz  
1-6 Channels Bitstream  
32kHz - 96kHz  
Audio Processing  
Dolby Pro Logic II *All analog/digital (No DB-25) inputs.  
(See page 16 for a detailed description of this feature)  
Maximum supported video input formats  
DVI-D:  
DVI-I:  
Maximum resolution 1920x1200/60Hz  
Maximum resolution 1920x1200/60Hz (both analog and digital)  
Component: Maximum resolution 1920x1080/60Hz  
VGA:  
HDMI:  
Maximum resolution 1920x1200/60Hz  
Maximum resolution 1920x1080/60Hz  
Supported video output formats:  
Digital:  
Analog:  
1920x1080p 24/50/60Hz and 2K (2048x1080p 24/50/60Hz)  
1920x1080p 24/50/60Hz and 2K (2048x1080p 24/50/60Hz)  
23.97/24/50/60Hz passthrough is supported via all inputs. (Detailed timings  
can be found on page 13)  
Supported audio output formats:  
Analog:  
8 channel discrete (balanced over DB-25)  
This product is fully HDCP compliant  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Features  
1 DVI-I video + analog or digital audio inputs  
1 DVI-D video + analog or digital audio inputs  
2 Component video + analog or digital audio inputs  
VGA + analog or digital audio input  
HDMI input  
DB-25 analog audio input (7.1 discrete, balanced)  
Support resolutions of 1920x1080p 60Hz and 2048x1080p 60Hz  
Selectable digital or analog audio input for each source (except HDMI)  
Front panel source selection with “bypass” mode for DB-25 pass-through  
RS-232 for optional rmware updates/external control  
LCD screen for scaling preferences & audio settings  
Audio delay for precise video synchronization  
Capable of “black barring”/stretching 4:3 aspect ratio  
Floating balanced audio outputs with separate power supply for avoiding  
ground loop issues.  
Package Includes  
(1) Cinema Scaler Pro I unit  
(1) 12V DC Power Supply  
(1) Set of Rack Ears  
(1) User’s Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PANEL LAYOUT  
Front Panel  
4
4
4
2
2
2
1
3
1
5
1
6
7
8
9
Back Panel  
4
2
4
10  
11  
1
12  
1
3
13  
14 15  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
PANEL DESCRIPTIONS  
1
2
Analog L+R RCA Audio Input  
This input will accept 2 channel analog audio using 1 pair of RCA analog audio  
type connectors. There is a set of connectors available for all inputs except for  
the HDMI and DB-25 inputs. For a listing of accepted audio formats please see  
page 14.  
Digital Optical Audio Input (TOSLINK)  
This input will accept multi-channel digital audio using 1 optical type connector.  
There is a connector available for all inputs except for the HDMI, Component 2,  
and DB-25 inputs. For a listing of accepted audio formats, including supported  
audio channels, please see page 14-15.  
3
4
Component Video Input  
This input will accept component video (YPbPr) via 3 RCA type connectors.  
There is one set of connectors located on the front and back panels. For a listing  
of accepted resolutions please see page 13.  
Digital Coaxial Audio Input (S/PDIF)  
This input will accept multi-channel digital audio using 1 RCA type connector.  
There is a connector available for all inputs except for the HDMI and DB-25  
inputs. For a listing of accepted audio formats, including supported audio  
channels, please see page 14-15.  
5
6
VGA Video Input  
This input will accept VGA video (RGBHV) via a HD-15 type connector. For a  
listing of accepted resolutions please see page 13.  
DVI-I Video Input  
This input will accept DVI-I video (RGB analog or digital) via a DVI-I type  
connector. Input format is automatically determined. For a listing of accepted  
resolutions please see page 13.  
7
HDMI Input  
This input will accept an HDMI (RGB,YCbCr) signal via an HDMI type A  
connector. Audio and video are both supported by this connector. For a listing of  
accepted resolutions and audio formats please see page 13.  
8
9
High Contrast LCD Display  
This display will show pertinent information for conguration control and status.  
For information on how to use this display please see page 12-19.  
Navigation and Input Selection Buttons  
These buttons are used to select the desired input source. Navigation buttons  
are also provided for easy user navigation and conguration of features. Please  
see page 7 for more information.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PANEL DESCRIPTIONS  
10 DVI-D Output  
This input will accept DVI-D (RGB digital) capable display device via a DVI-I  
type connector. This output port will support displays that are capable of  
accepting the two output resolutions; 1080p and 2K.  
11 7.1 Channel Analog Audio Output  
This output will accept a DB-25 type connector to connect to a multi-channel  
analog audio device. This port is always active. All audio from each input will be  
converted and output through this port. For pin-out information please see page  
42-43.  
12 DVI-D Input  
This input will accept DVI-D video (digital) via a DVI-I type connector. Input  
format is digital only. For a listing of accepted resolutions please see page 13.  
13 7.1 Channel Analog Audio Input  
This input will accept a DB-25 type connector for multi-channel analog audio  
input. This port is only active when the bypass mode is selected (page 41). For  
pin-out information please see page 42-43.  
14 RS-232 Serial Control Interface  
This port is used for serial communication for multiple functions. Access to  
certain features are only through the RS-232 interface.  
15 12V DC Power Receptacle  
This port will accept power via the included 12V DC power supply. This is a  
locking type connector.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT PANEL BUTTONS  
The front panel buttons are used for navigation, conguration, and input selection.  
NAVIGATION  
The directional buttons (◄▲►▼) are used to navigate the user menus system. The  
Select button is used to conrm menu and item selections.  
The Menu button is used to enter the conguration menu .  
The Exit button is used to exit the conguration menu at any time.  
INPUT SELECTION  
The desired input port can be directly selected using the front panel input buttons.  
Simply press the desired input button. Source changing can take up to 10 seconds  
(longer when syncing digital video signals).  
The bypass button will enable bypass mode (page 41).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING AND OPERATING THE A/V CINEMA SCALER PRO  
INSTALLING THE A/V CINEMA SCALER PRO  
1. Connect video source devices to the A/V Cinema Scaler Pro’s video inputs.  
The following inputs are available:  
Front Panel  
HDMI  
DVI-I (analog and digital DVI)  
VGA  
Component  
Back Panel  
DVI-D (digital DVI)  
Component  
NOTE:  
2. Connect audio sources to the A/V Cinema Scaler Pro’s audio inputs. The  
following inputs are available:  
Front Panel  
HDMI:  
Embedded audio  
DVI-I:  
Component:  
VGA:  
Analog RCA L+R or Digital TOSLINK or S/PDIF  
Analog RCA L+R or Digital TOSLINK or S/PDIF  
Analog RCA L+R or Digital TOSLINK or S/PDIF  
Back Panel  
DVI-D:  
Component:  
DB-25:  
Analog RCA L+R or Digital TOSLINK or S/PDIF  
Analog RCA L+R or Digital S/PDIF  
Analog multi-channel audio. Please see  
page 42-43 for specic pin-out information  
NOTE: All inputs, except for HDMI, is able to accept both analog and digital  
audio sources. Therefore, each input has a selector option in the OSD that will  
allow the user to choose which type of audio is used.  
3. Connect the DVI capable output device to the A/V Cinema Scaler Pro’s DVI-I  
input.  
NOTE: This output is a DVI-I connector. Analog or digital type video can  
be output through this connector. Selection of the output format can be  
accomplished by using either the OSD (on-screen display) or the front panel  
LCD and buttons. Please see page 17 for instructions on how to change the DVI  
output type.  
4. Connect the analog DB-25 audio output to the analog DB-25 input on the  
appropriate audio device.  
5. Connect the included 12V power supply between the A/V Cinema Scaler Pro  
and an open power socket. Ensure that the input cable is properly secured  
to the unit.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
A/V CINEMA SCALER PRO - NAVIGATION  
The A/V Cinema Scaler Pro uses a series of buttons, located on the front panel,  
for all input selection and feature functions. All status information, such as  
the input and output resolutions, are always available on the front panel LCD  
Screen. User adjustable features, such as color correction and aspect ratio, can  
be navigated and adjusted by referencing either the LCD Screen or the On-  
Screen Display (OSD).  
All menu navigation and adjustments are accomplished by using the front panel  
buttons. Please review the front panel buttons below.  
For a full description of each of these buttons please see the descriptions on  
page 7.  
LCD SCREEN  
The LCD Screen displays status information and can also be used to navigate  
and adjust functions on the A/V Cinema Scaler Pro. This display is a high  
contrast 2-line/16-character LCD. It will display information like in the example  
below.  
Main Screen  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
A/V CINEMA SCALER PRO - INITIAL STARTUP  
POWERING ON  
Once all video and audio connections have been made and the power supply  
has been connected, the A/V Cinema Scaler Pro should automatically turn on.  
The front panel LCD should indicate this by displaying the text:  
Product Title  
This screen should be displayed for 3 seconds while the system is booting. Once  
this is complete, the Main Screen should appear.  
There are 7 different information panes that are available to provide the user with  
useful information. These are the Product Title Main Screen Output Screen,  
Surround Processing, DVI Output Type, HDMI EDID Type, and Audio Input  
Type information panes. Please use the and buttons to cycle through the  
different information panes. The cycling order is displayed on the next page.  
NOTE: The Audio Input Type pane will not be available when the HDMI input is  
selected.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
Product Title  
Main Screen  
Output Screen  
Surround Processing Screen  
Dynamic Range Control Screen  
Reference Level Compensation  
Screen  
DVI Output Type Screen  
HDMI EDID Type Screen  
Audio Input Type Screen  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
A/V CINEMA SCALER PRO - MAIN SCREEN  
MAIN DISPLAY  
The Main Screen will display useful information to the user. It displays the  
currently selected input port and audio input format. The currently used output  
format can also be displayed by pressing the button. Pressing the or ►  
buttons while on this screen will have no effect. Please see below for the Main  
Screen layout.  
Selected Input  
Input Resolution  
Main Screen  
Input Audio  
Type  
Audio  
Format  
Sampling  
Rate  
Number of  
Channels  
SELECTED INPUT  
This portion of the screen will display the currently selected input. The available  
inputs, labels, and associated buttons are listed below:  
LCD Display  
Name  
Front Panel  
Button  
Actual Input  
Location  
COMP1  
PC  
Component  
VGA  
Front Panel  
Front Panel  
Front Panel  
Front Panel  
Back Panel  
Back Panel  
COMP1  
VGA  
DVI-D1/DVI-A1  
HDMI  
DVI-I  
DVI1  
HDMI  
HDMI  
COMP2  
DVI2  
COMP2  
DVI-D2  
Component  
DVI-D  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
INPUT RESOLUTIONS  
This portion of the screen will display the currently selected input’s resolution.  
The acceptable resolutions for each input type are listed below.  
Input  
Format  
Resolution  
480i/p  
Frequency  
59/60Hz  
576i/p  
50Hz  
Component  
YPbPr  
720p  
50/60Hz  
1080i/p  
25/29.97/30/50/59.97/60Hz  
VGA (640x480)  
SVGA (800x600)  
XGA (1024x768)  
1152x864  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
60Hz  
59/60Hz  
50Hz  
50/60Hz  
SXGA (1280x1024)  
1280x960  
PC (VGA)  
RGBHV  
WXGA (1280x800)  
WXGA (1360x768)  
UXGA (1600x1200)  
WUXGA (1920x1200)  
VGA (640x480)  
SVGA (800x600)  
XGA (1024x768)  
1152x864  
RGBHV  
or  
RGB  
SXGA (1280x1024)  
1280x960  
DVI-I (analog  
and digital)  
WXGA (1280x800)  
WXGA (1360x768)  
UXGA (1600x1200)  
WUXGA (1920x1200)  
480i/p  
576i/p  
DVI-D & DVI-I  
(Digital Only) &  
HDMI  
RGB  
or YCbCr  
720p  
23.97/24/25/29.97/30/50/59.  
97/60Hz  
1080i/p  
NOTE: 23.97/24/50/60Hz signal are pass-through. No framerate conversions will  
be applied.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
AUDIO INPUT TYPE  
This portion of the screen will display the currently selected input’s audio type. All  
inputs, except for HDMI, will accept both an analog and digital type audio signals.  
The user can choose which type of audio is selected by using the Audio Input  
Type pane Each input’s audio type, except for HDMI, can be user selected. This  
is not available in bypass mode.  
Input  
Audio Input Type  
Analog (L+R RCA)  
Digital (S/PDIF)/(TOSLINK)  
LCD Display (Audio Type)  
A
D
A
D
A
D
D
A
D
A
D
COMP1  
Analog (L+R RCA)  
VGA  
Digital (S/PDIF)/(TOSLINK)  
Analog (L+R RCA)  
DVI1  
HDMI  
Digital (S/PDIF)/(TOSLINK)  
Digital (S/PDIF)  
Analog (L+R RCA)  
Digital (S/PDIF)  
COMP2  
Analog (L+R RCA)  
Digital (S/PDIF)/(TOSLINK)  
DVI2  
AUDIO FORMATS  
This portion of the screen will display the currently selected input’s audio format.  
When the input’s audio type selector switch is set to analog, the display will only  
read “Stereo”; Sampling rate and number of channels will not be displayed. This  
does not cover the bypass mode.  
Input  
Audio Input Type  
Analog (L+R RCA)  
Digital (S/PDIF)/(TOSLINK)  
Supported Audio Formats  
Stereo  
COMP1  
PCM /  
PCM /  
(Dolby Digital)  
Stereo  
(Dolby Digital)  
Stereo  
Analog (L+R RCA)  
VGA  
Digital (S/PDIF)/(TOSLINK)  
Analog (L+R RCA)  
DVI1  
HDMI  
Digital (S/PDIF)/(TOSLINK)  
PCM /  
PCM /  
(Dolby Digital)  
(Dolby Digital)  
Digital (S/PDIF)  
Analog (L+R RCA)  
Digital (S/PDIF)  
Stereo  
(Dolby Digital)  
Stereo  
(Dolby Digital)  
COMP2  
PCM /  
PCM /  
Analog (L+R RCA)  
Digital (S/PDIF)/(TOSLINK)  
DVI2  
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
SAMPLING RATES  
This portion of the screen will display the currently selected input’s audio  
sampling rate. This will only display information when the input audio type is  
digital. This does not cover the bypass mode.  
Input  
COMP1  
VGA  
Audio Input Type  
Digital (S/PDIF)  
Digital (S/PDIF)  
Digital (S/PDIF)  
Embedded Digital  
Digital (S/PDIF)  
Digital (S/PDIF)  
Supported Sampling Rates  
32KHz-96KHz  
32KHz-96KHz  
DVI1  
32KHz-96KHz  
HDMI  
COMP2  
DVI2  
32KHz-96KHz  
32KHz-96KHz  
32KHz-96KHz  
NUMBER OF CHANNELS  
This portion of the screen will display the number of audio channels that are  
being used by the currently selected input. This will only display information when  
the input audio type is digital. This does not cover the bypass mode.  
Supported  
Digital) Channels  
(Dolby  
Supported PCM  
Channels  
Input  
Audio Input Type  
COMP1  
VGA  
Digital (S/PDIF)  
Digital (S/PDIF)  
Digital (S/PDIF)  
Embedded Digital  
Digital (S/PDIF)  
Digital (S/PDIF)  
Up to 2  
Up to 2  
Up to 2  
Up to 8  
Up to 2  
Up to 2  
Up to 6 (5.1)  
Up to 6 (5.1)  
Up to 6 (5.1)  
Up to 6 (5.1)  
Up to 6 (5.1)  
Up to 6 (5.1)  
DVI1  
HDMI  
COMP2  
DVI2  
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.  
OUTPUT SCREEN  
Pressing the button when the Main Screen is displayed will take the user to  
the Output Screen. This screen is provided to easily determine and change the  
current output resolution setting.  
Output Screen  
Output Timing  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
This A/V Cinema Scaler Pro supports only two output resolutions  
Output  
1080P60  
2K  
Resolution  
1920x1080 60Hz  
2048x1080 60Hz  
The user has the option of changing the output resolution from the Output  
Screen. Use the or buttons to immediately change the output resolution.  
Pressing the button will return the user to the Main Screen. Pressing the ▼  
will cycle the user to the Product Title screen.  
NOTE: 1080p 24Hz is supported and will be passed through as either 1080p  
24Hz or 2K 24Hz depending on the selected output resolution.  
SURROUND PROCESSING  
This unit features Dolby Pro Logic II surround sound processing. Dolby Pro  
Logic II processes any high quality stereo signal source into ve separate full  
frequency channels. Dolby Pro Logic II also decodes 5 channels from stereo  
signals encoded in traditional four-channel Dolby Surround or ve-channel Dolby  
Pro Logic II.  
This screen will display the current status of the surround processing mode.  
Pressing the button will return the user to the Output Screen. Pressing the ▼  
will cycle the user to the DVI Output Type screen.  
The user has the option of changing the processing mode from the Surround  
Processing screen. Use the or buttons to immediately change the  
processing mode on or off.  
NOTE: When the processing mode is set to ON, it will only have an affect on 2  
channel analog and digital sources.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
DYNAMIC RANGE COMPRESSION  
Dynamic Range Compression (DRC) is a feature that will apply compression of  
loud sounds over a certain threshold while quiet sounds remain untreated. This  
feature is useful for reducing loud noises that will overpower quieter sounds.  
This screen will display the current DRC state. Pressing the button will return  
the user to the Surround Processing screen. Pressing the will cycle the user  
to the RLC screen.  
The user has the option of changing the DRC state from this screen. Use the ◄  
or buttons to immediately change the DRC state.  
REFERENCE LEVEL COMPENSATION  
Reference Level Compensation (RLC) features attenuation that can be used to  
apply a -3dB gain to the front right/left and center channels. This -3dB will be  
applied when RLC is on.  
This screen will display the current RLC state. Pressing the button will return  
the user to the DVI Output Type screen. Pressing the will cycle the user to  
the DRC screen.  
The user has the option of changing the RLC state from this screen. Use the ◄  
or buttons to immediately change the RLC state.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
DVI OUTPUT TYPE  
The DVI output is a DVI-I type which can be connected to either a digital or  
analog DVI device. This option will allow the user to change the output type at  
anytime. Please note that HDCP protected content will not be output when the  
modes is set to DVI-A Analog  
This screen will display the currently selected DVI Output Type. Pressing the ▲  
button will return the user to the RLC screen. Pressing the will cycle the user  
to the HDMI EDID Type screen.  
The user has the option of changing the DVI Output Type from this screen. Use  
the or buttons to immediately change the DVI Output Type  
NOTE: In accordance with HDCP regulations, protected content will not be  
output via the DVI-I port when the DVI Output Type is set to DVI-A Analog.  
HDMI EDID TYPE  
This option will set the supported LPCM audio channels in the EDID (display/  
device information). This will allow the HDMI source device to output up 7.1  
channels of LPCM audio or limit it to 5.1 channels.  
This screen will display the currently selected HDMI EDID Type. Pressing the ▲  
button will return the user to the DVI Output Type screen. Pressing the will  
cycle the user to the Audio Input Type screen.  
The user has the option of changing the HDMI EDID Type from this screen. Use  
the or buttons to immediately change the HDMI EDID Type  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
NOTE: This option will simply set the supported audio formats to include either  
5.1 or 7.1 LPCM audio formats. The source must still be able to output these  
formats for this option to have any effect.  
AUDIO INPUT TYPE  
Each input, excluding the HDMI input, supports multiple audio input types. This  
option will allow the user to select the desired audio type for each input. For a  
complete listing of the supported formats for each input, please see page 14.  
This screen will display the currently selected Audio Input Type. Pressing the  
button will return the user to the HDMI EDID Type screen. Pressing the will  
cycle the user to the Product Title screen.  
The user has the option of changing the Audio Input Type from this screen. Use  
the or buttons to immediately change the Audio Input Type  
NOTE: This option is not available on the HDMI and Bypass inputs. The  
Component 2 input does not have an OPTICAL audio input.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE A/V CINEMA SCALER PRO - MAIN LCD  
PRODUCT TITLE  
This screen will display the product title. Pressing the button will return the  
user to the Output Screen. Pressing the will cycle the user to the Main  
Screen Pressing the or buttons while on this screen will have no effect.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
MAIN FEATURES MENU  
Once all connections have been made and a valid video input signal is detected,  
the Main Features Menu will become available. The following video/audio  
adjustment menus will also become available. From any of the information panes  
on the Main LCD screen, press the Menu button to enter the Main Features  
Menu. Use the and buttons to cycle through the Main Features Menu. The  
following illustrates the order of the features and the cycling order.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
The following are the Main Features Menu items and short descriptions:  
Picture Adjust  
Color Adjust  
Options in this menu include preset video settings and  
user adjustable video settings. Items such as brightness,  
contrast, and sharpness are found here.  
Options in this menu control the appearance of white.  
Preset settings are available, as well as a user setting with  
manual control.  
Lipsync Delay  
Surround Delay  
This menu will allow the user to apply a lip sync delay that  
is input specic. Settings made for one input will not affect  
another input.  
This menu will allow the user to apply a delay to each  
individual surround channel. Right surround, left surround,  
rear right surround, and rear left surround channel delay  
adjustments can be made. These settings are global  
and will affect all output audio, no matter which input is  
selected.  
Output Selection  
OSD Adjust  
This menu will control which output resolution is used.  
This menu controls options for the on-screen display  
system. Items such as OSD-timeout and opacity are found  
here.  
Firmware  
The rmware revision and build date are listed here.  
NOTE: The following pages will strictly reference what the LCD Screen displays  
when adjusting options. The OSD will mirror the options and functions in the  
following sections.  
A/V CINEMA SCALER PRO - PICTURE ADJUST  
The Picture Adjust menu will allow the user to select predened picture modes  
that will help enhance the nal video output. These presets will help by tuning  
the output video to compensate for different lighting and viewing environments.  
Presets can be bypassed by using the User setting. Once the User setting has  
been selected all individual options become modiable.  
To enter the Picture Adjust menu use the and buttons from the Main  
Features Menu to select Picture Adjust. Use the or Select button to enter  
the menu. The following page illustrates all possible options that are available in  
the Picture Adjust menu for all inputs.  
NOTE: Some menu items will be input specic and will not appear in other input  
menu. All adjustments in this menu are global for all inputs except Bypass Mode.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
Menu for HDMI, DVI-D and  
DVI-I (Digital Portion) Inputs  
Menu for Component Inputs  
Menu for VGA and  
DVI-I (Analog Portion) Inputs  
MODE  
The preset picture modes are selectable with this option. Preset contrast,  
brightness, hue, saturation, and sharpness settings are stored for each mode.  
When the mode is switched to User all individual options will be available for  
adjustment.  
To cycle between the modes, use the or or Select buttons. The change will  
be immediate and no other buttons need to be pressed to conrm the change.  
The modes and cycle order is listed on the next page.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
The preset modes are listed below:  
Standard  
Movie  
Vivid  
Useful for general content  
Useful for dimly lit environments  
Useful for accentuating colors for a more vibrant image  
User congured settings  
User  
Once the User mode is selected, additional options will become available. Use  
the button to select the next option. Use the option to return to the previous  
option.  
CONTRAST  
This option will set the contrast level for the output video signal.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
BRIGHTNESS  
This option will set the brightness level for the output video signal.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
HUE  
This option will set the hue balance for the output video signal. This option will  
not be available when the VGA or DVI-I (Analog portion) input is selected.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
SATURATION  
This option will set the saturation level for the output video signal. This option will  
not be available when the VGA or DVI-I (Analog portion) input is selected.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
SHARPNESS  
This option will set the sharpness level for the output video signal. This option will  
not be available when the VGA or DVI-I (Analog portion) input is selected.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
ASPECT RATIO  
The aspect ratio of the output video is set with this option. There are 5 aspect  
ration modes to choose from.  
To cycle between the aspect ratio modes, use either the or or Select  
buttons. The change will be immediate and no other buttons need to be pressed  
to conrm the change. The aspect ratio modes and cycle order is listed below.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
The aspect ratio modes are listed below:  
Full  
Stretches the image to ll the screen  
Overscan  
Stretches the image to just beyond the border of the output  
resolution (a portion of the image may be cropped)  
Underscan  
Stretches the image to just within the border of the output  
resolution (a black border will appear around the outside edges)  
Letterbox  
Panscan  
Stretches the image to 16:9 aspect ratio without underscan  
Stretches the image to 4:3 aspect ratio without underscan  
Please use the examples below do determine which aspect ratio mode should  
be used. Please pay attention to the appearance of the circles. All circles  
that appear as ovals will result in an output image that appears stretched/  
Compressed.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
Use the button to select the next option. Use the option to return to the  
previous option.  
NOISE REDUCTION  
This option will allow the user to apply a noise reduction lter to the component  
video input sources. This option will only be available when the input source  
is component video. The noise reduction lter reduces noise that commonly  
appears in analog video sources. There are 4 settings to choose from.  
To cycle between the noise reduction settings, use either the or or Select  
buttons. The change will be immediate and no other buttons need to be pressed  
to conrm the change. The aspect ratio modes and cycle order are listed below.  
The noise reduction modes are listed below:  
Off  
Noise reduction is off  
Low  
Low level video noise reduction is applied  
Moderate level video noise reduction  
Middle  
High  
High level video noise reduction (may cause a slight ghosting  
effect on objects)  
Use the button to select the next option. Use the option to return to the  
previous option.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
HORIZONTAL POSITION  
This option will set the horizontal position of the video image in relation to the  
output border. This option is only available when using the VGA or DVI-I (Analog  
portion) inputs.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
VERTICAL POSITION  
This option will set the vertical position of the video image in relation to the  
output border. This option is only available when using the VGA or DVI-I (Analog  
portion) inputs.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
CLOCK  
This option will adjust the clock timing to enable the user to adjust the video  
image. This option is only available when using the VGA or DVI-I (Analog portion)  
inputs.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
PHASE  
This option will adjust the phase to enable the user to adjust the video image.  
This option is only available when using the VGA or DVI-I (Analog portion) inputs.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
EXIT PICTURE ADJUST  
This option will return the user to the Main Features Menu  
To return to the Main Features Menu press the Select button. Pressing the ▼  
button will cycle to the Mode option. Use the button to select the next option.  
Use the option to return to the previous option.  
A/V CINEMA SCALER PRO - COLOR ADJUST  
The Color Adjust menu will allow the user to select predened settings for the  
appearance of white (color temperature). Presets can be bypassed by using  
the User setting. Once the User setting has been selected all individual options  
become modiable.  
To enter the Color Adjust menu use the and buttons from the Main  
Features Menu to select Color Adjust. Use the or Select button to enter the  
menu. The following page illustrates all possible options that are available in the  
Color Adjust menu.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
COLOR ADJUST MENU OPTIONS  
These Options are  
only available when  
the User mode is  
selected  
COLOR TEMP  
The preset color temperature modes are selectable with this option. Preset red,  
green, and blue settings are stored in each mode. When the mode is switched to  
User all individual options will be available for adjustment.  
To cycle between the modes, use the or or Select buttons. The change will  
be immediate and no other buttons need to be pressed to conrm the change.  
The modes and cycle order is listed are listed on the following page.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
The preset color temperature settings are listed below:  
Normal  
Colors/white will be neutral. White should not have an overly red  
or blue appearance.  
Warm  
Cool  
User  
Colors/white will have a slightly red appearance.  
Colors/white will have a slightly blue appearance.  
User congured settings  
Once the User mode is selected, additional options will become available. Use  
the button to select the next option. Use the option to return to the previous  
option.  
RED  
This option will set the amount of red in the output video signal.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
GREEN  
This option will set the amount of green in the output video signal.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
BLUE  
This option will set the amount of blue in the output video signal.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
EXIT COLOR ADJUST  
This option will return the user to the Main Features Menu  
This option will return the user to the Main Features Menu. To return to the Main  
Features Menu press the Select button. Pressing the button will cycle to the  
Color Temp option. Use the button to select the next option. Use the option  
to return to the previous option.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
A/V CINEMA SCALER PRO - LIPSYNC DELAY ADJUST  
The Lipsync Delay Adjust menu will allow the user to apply a lip sync delay that  
is useful for correcting errors in synchronization between the audio and video.  
This delay has a maximum correction time of 80 milliseconds. Each input can  
have a separate lip sync adjustment value. This adjustment will not affect audio  
delay when in the Bypass Mode.  
To enter the Lipsync Delay Adjust menu use the and buttons from the  
Main Features Menu to select Lipsync Delay Adjust. Use the or Select  
button to enter the menu. There is only one option in this menu.  
LIPSYNC DELAY  
This option will set the lip sync delay for the currently selected input.  
Pressing the or Select buttons will advance the delay by 5 millisecond  
increments. Pressing the button will reduce the delay by 5 milliseconds. The  
maximum delay available is 80 milliseconds. Use the or button to select the  
Exit LipSync Adjust option  
EXIT LIPSYNC ADJUST  
This option will return the user to the Main Features Menu  
This option will return the user to the Main Features Menu. To return to the Main  
Features Menu press the Select button. Pressing the or button will return  
the user to the LipSync Delay option.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
A/V CINEMA SCALER PRO - SURROUND DELAY ADJUST  
The Surround Delay Adjust menu will allow the user to apply a delay to  
compensate for the distance between the main and surround audio channels.  
Each surround delay has a maximum correction time of 150 milliseconds. The  
settings in this menu option are global and will affect the surround channels for  
every input. This adjustment will not affect audio delay when in the Bypass Mode.  
To enter the Surround Delay Adjust menu use the and buttons from the  
Main Features Menu to select Surround Delay Adjust. Use the or Select  
button to enter the menu. The following illustrates all possible options that are  
available in the Surround Delay Adjust menu.  
SURROUND RIGHT DELAY  
This option will set the surround delay for the surround right channel.  
When this option is selected, pressing the or Select buttons will advance the  
delay by 5 millisecond increments. Pressing the button will reduce the delay  
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼  
button to select the next option. Use the option to return to the previous option.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
SURROUND LEFT DELAY  
This option will set the surround delay for the surround left channel.  
When this option is selected, pressing the or Select buttons will advance the  
delay by 5 millisecond increments. Pressing the button will reduce the delay  
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼  
button to select the next option. Use the option to return to the previous option.  
REAR SURROUND RIGHT DELAY  
This option will set the surround delay for the rear surround right channel.  
When this option is selected, pressing the or Select buttons will advance the  
delay by 5 millisecond increments. Pressing the button will reduce the delay  
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼  
button to select the next option. Use the option to return to the previous option.  
REAR SURROUND LEFT DELAY  
This option will set the surround delay for the rear surround left channel.  
When this option is selected, pressing the or Select buttons will advance the  
delay by 5 millisecond increments. Pressing the button will reduce the delay  
by 5 milliseconds. The maximum delay available is 150 milliseconds. Use the ▼  
button to select the next option. Use the option to return to the previous option.  
EXIT LIPSYNC ADJUST  
This option will return the user to the Main Features Menu  
This option will return the user to the Main Features Menu. To return to the Main  
Features Menu press the Select button. Use the button to select the next  
option. Use the option to return to the previous option.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
A/V CINEMA SCALER PRO - OUTPUT SELECTION  
The Output Selection menu will allow the user to select the output video  
resolution.  
To enter the Output Selection menu use the and buttons from the Main  
Features Menu to select Output Selection. Use the or Select button to enter  
the menu. The following illustrates all possible options that are available in the  
Output Selection menu.  
OUTPUT TIMING 1080P  
This option will change the output resolution to a progressive 1920x1080 at 60Hz  
signal. All input formats will be scaled to this resolution.  
Press the Select button to set this resolution. The change will be immediate.  
Pressing the button will cycle to the Output Timing 2K option. Use the ▼  
button to select the next option. Use the option to return to the previous option.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
OUTPUT TIMING 2K  
This option will change the output resolution to a progressive 2048x1080 at 60Hz  
signal. All input formats will be scaled to this resolution.  
Press the Select button to set this resolution. The change will be immediate.  
Pressing the button will cycle to the Exit Output Selection option. Use the ▼  
button to select the next option. Use the option to return to the previous option.  
EXIT OUTPUT SELECTION  
This option will return the user to the Main Features Menu  
This option will return the user to the Main Features Menu. To return to the Main  
Features Menu press the Select button. Use the button to select the next  
option. Use the option to return to the previous option.  
A/V CINEMA SCALER PRO - ON SCREEN DISPLAY ADJUST  
The On Screen Display Adjust menu will allow the user to set options related  
to the on-screen display. Horizontal and vertical alignment, opacity, and time-out  
settings are found here.  
To enter the On Screen Display Adjust menu use the and buttons from  
the Main Features Menu to select On Screen Display Adjust. Use the ▼  
or Select button to enter the menu. The following page illustrates all possible  
options that are available in the On Screen Display Adjust menu.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
HORIZONTAL POSITION  
This option will change the horizontal position of the on-screen display.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
VERTICAL POSITION  
This option will change the vertical position of the on-screen display.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
TIMEOUT  
This option will change the amount of idle time before the on-screen display  
returns to the Main Screen  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
BACKGROUND  
This option will change the opacity level of the on-screen display.  
Press the or or Select buttons to begin adjusting this option. A < and >  
character will surround the numerical value to signify that user adjustment can  
begin. Use the and to adjust the value of this option. When adjustments are  
complete, press the Select button to save. Use the button to select the next  
option. Use the option to return to the previous option.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A/V CINEMA SCALER PRO - CONFIGURATION  
EXIT OSD ADJUST  
This option will return the user to the Main Features Menu  
This option will return the user to the Main Features Menu. To return to the Main  
Features Menu press the Select button. Use the button to select the next  
option. Use the option to return to the previous option.  
A/V CINEMA SCALER PRO - FIRMWARE  
The Firmware option will simply display the current rmware that is running  
on the A/V Cinema Scaler Pro. This information may be needed when calling  
technical support.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DB-25 AUDIO INPUT & BYPASS MODE  
A/V CINEMA SCALER PRO - DB-25 AUDIO BYPASS MODE  
The A/V Cinema Scaler Pro can accept high quality 8 channel analog audio via  
the DB-25 input located on the back panel. This input is only accessible from the  
bypass mode. The audio through this input will be directly passed to the analog  
DB-25 output.  
ENABLING BYPASS MODE  
To enable the bypass mode, locate the bypass mode button on the front panel.  
From the Main Screen press the Bypass button on the front panel to enable the  
bypass mode. The bypass mode will cycle in the following order. Each button  
press will progress to the next option.  
Main Screen  
Analog DB-25  
Input  
Please note that there will be NO VIDEO OUTPUT when using the bypass  
function.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANALOG INPUT AND OUTPUT PINOUT  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ANALOG INPUT AND OUTPUT PINOUT  
ANALOG DB-25 OUTPUT  
Pin  
1
Function  
Pin  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Function  
Left Negative Output  
Right Surround Positive Output  
Right Surround Negative Output  
Left Surround Negative Output  
Right Extra Negative Output  
Right Negative Output  
Left Extra Negative Output  
Center Negative Output  
Chassis GND  
Left Surround Positive Output  
Right Extra Positive Output  
Right Positive Output  
Left Extra Positive Output  
Chassis GND  
2
3
4
5
6
Center Positive Output  
Tied to Input  
7
8
NC  
9
NC  
10  
11  
12  
13  
14  
Chassis GND  
Subwoofer Positive Output (band-  
limited to 300Hz in DigitalMedia  
mode)  
Chassis GND  
Subwoofer Negative Output  
Chassis GND  
25  
Tied to Input  
Left Positive Output  
ANALOG DB-25 INPUT  
Pin  
1
Function  
Pin  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Function  
Left Negative Input  
Right Surround Positive Input  
Right Surround Negative Input  
Left Surround Negative Input  
Right Extra Negative Input  
Right Negative Input  
Left Extra Negative Input  
Center Negative Input  
Chassis GND  
Left Surround Positive Input  
Right Extra Positive Input  
Right Positive Input  
Left Extra Positive Input  
Chassis GND  
2
3
4
5
6
Center Positive Input  
Tied to Output  
7
8
NC  
9
NC  
10  
11  
12  
13  
14  
Chassis GND  
Subwoofer Positive Input (band-  
limited to 300Hz in DigitalMedia  
mode)  
Chassis GND  
Subwoofer Negative Input  
Chassis GND  
25  
Tied to Output  
Left Positive Input  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232 SERIAL CONTROL INTERFACE  
RS-232 SETTINGS  
Bits per second ................................................................................................. 19200  
Data bits .................................................................................................................... 8  
Parity .................................................................................................................. None  
Stop bits .....................................................................................................................1  
Flow Control ....................................................................................................... None  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232 SERIAL CONTROL COMMANDS  
Set Commands  
Command Code  
S SOURCE 0  
S SOURCE 1  
S SOURCE 2  
S SOURCE 3  
S SOURCE 4  
S SOURCE 5  
S SOURCE 6  
S SOURCE 7  
S AUDIO 0  
Response  
Description  
> SOURCE HDMI  
> SOURCE DVI1  
HDMI  
DVI1  
> SOURCE DVI2  
DVI2  
> SOURCE YPbPr2  
> SOURCE YPbPr1  
> SOURCE PC  
YPbPr2  
YPbPr1  
PC  
> SOURCE ANALOG_BYPASS  
> SOURCE DIGITAL_BYPASS  
> AUDIO Stereo  
Analog Bypass  
Digital Bypass(if available<---H/W exist)  
Audio-Input select to Analog (Stereo)  
Audio-Input select to Digital (Coaxial)  
Audio-Input select to Digital (Optical)  
Soft Reboot Machine  
1080P 60HZ RESOLUTION OUTPUT  
2K RESOLUTION OUTPUT  
SCALER FULL OUTPUT  
SCALER OVERSCAN OUTPUT  
SCALER UNDERSCAN OUTPUT  
SCALER LETTERBOX OUTPUT  
SCALER PANSCAN OUTPUT  
S AUDIO 1  
> AUDIO Coaxial  
S AUDIO 2  
> AUDIO Optical  
REBOOT  
S OUTPUT 10  
S OUTPUT 19  
S SIZE 0  
> OUTPUT 1080P60  
> OUTPUT 2K  
> SIZE FULL  
S SIZE 1  
> SIZE OVERSCAN  
> SIZE UNDERSCAN  
> SIZE LETTERBOX  
> SIZE PANSCAN  
S SIZE 2  
S SIZE 3  
S SIZE 4  
> PICTUREMODE  
STANDARD~USER  
0:STANDARD ; 1:MOVIE ; 2:VIVID ; 3:USER  
,PICTURE MODE OUTPUT  
S PICTUREMODE 0~3  
S CONTRAST 0~100  
S BRIGHTNESS 0~100  
S HUE 0~100  
> CONTRAST 0~100  
> BRIGHTNESS 0~100  
> HUE 0~100  
CONTRAST 0~100 ADJUST  
BRIGHTNESS 0~100 ADJUST  
HUE 0~100 ADJUST  
[Defaut:50]  
[Defaut:45]  
[Defaut:50]  
[Defaut:60]  
[Defaut:32]  
S SATURATION 0~100  
S SHARPNESS 0~100  
> SATURATION 0~100  
> SHARPNESS 0~100  
SATURATION 0~100 ADJUST  
SHARPNESS 0~100 ADJUST  
0:OFF ; 1:LOW ; 2:MIDDLE ; 3:HIGH ,NR  
CONTROL  
S NR 0~3  
> NR OFF~HIGH  
S PCHPOSITION 0~100  
S PCVPOSITION 0~100  
S PCCLOCK 0~100  
S PCPHASE 0~63  
> PCHPOSITION 0~100  
> PCVPOSITION 0~100  
> PCCLOCK 0~100  
> PCPHASE 0~63  
H POSITION 0~100 ADJUST  
V POSITION 0~100 ADJUST  
PC MODE COLCK 0~100 ADJUST  
PC MODE PHASE 0~63 ADJUST  
0:NORMAL ; 1:WARM ; 2:COOL ; 3:USER ,COLOR  
TEMP SETTING  
COLOR TEMP "RED" ADJUST  
[Defaut:47]  
S COLORTEMP 0~3  
S RED 0~100  
> COLORTEMP NORMAL~USER  
> RED 0~100  
COLOR TEMP "GREEN" ADJUST  
[Defaut:47]  
S GREEN 0~100  
> GREEN 0~100  
COLOR TEMP "BLUE" ADJUST  
[Defaut:47]  
S BLUE 0~100  
> BLUE 0~100  
OSD H POSITION 0~100 ADJUST  
[Defaut:50]  
OSD V POSITION 0~100 ADJUST  
[Defaut:50]  
OSD TIMEOUT 0~100 SETTING  
[Defaut:10]  
S OSDHPOSITION 0~100  
S OSDVPOSITION 0~100  
S OSDTIMEOUT 0~100  
> OSDHPOSITION 0~100  
> OSDVPOSITION 0~100  
> OSDTIMEOUT 0~100  
S OSDBACKGROUND 0~8 > OSDBACKGROUND 0~8  
OSD OSDBACKGROUND 0~8 ADJUST[Defaut:5]  
RESET ACTION  
S RESET 1  
S OSDNOTICE 0  
S OSDNOTICE 1  
AUDIO_DATA  
PLIION  
> RESET ON  
> OSDNOTICE ENABLE  
> OSDNOTICE DISABLE  
AUDIO INFO. Like LCM shown  
> PLII IS ON  
ON SCREEN MENU is ON  
ON SCREEN MENU is OFF  
DOLBY PROLOGICII PROCESSING ON  
DOLBY PROLOGICII PROCESSING OFF  
DYNAMIC RANGE CONTROL ON  
DYNAMIC RANGE CONTROL OFF  
REFERENCE LEVEL COMP. ON  
REFERENCE LEVEL COMP. OFF  
DVI OUTPUT TYPE IS DVI-A ANALOG  
DVI OUTPUT TYPE IS DVI-D DIGITAL  
HDMI EDID TYPE 5.1  
PLIIOFF  
> PLII IS OFF  
DRCON  
> DRC IS ON  
DRCOFF  
RLCON  
> DRC IS OFF  
> RLC IS ON  
RLCOFF  
> RLC IS OFF  
DVIA  
> DVI-A ANALOG  
> DVI-D DIGITAL  
> EDID 5.1  
DVID  
EDID51  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RS-232 SERIAL CONTROL COMMANDS  
EDID71  
> EDID 7.1  
HDMI EDID TYPE 7.1  
VGA_AUTO  
> AutoCong  
VGA MODE AutoCong  
> DVI-D DIGITAL or DVI-A  
ANALOG  
DVI?  
SHOW DVI-D DIGITAL or DVI-A ANALOG  
> AUDIO SRC=ANALOG or COAX SHOW AUDIO SRC=ANALOG or COAX or  
AUDSRC?  
INFO  
or OPTICAL  
OPTICAL  
> EXT-AVCINEMAA 3.21  
07/02/2010  
SHOW Latest F/W and date when F/W updated.  
Status Commands  
Command Code  
Response  
Description  
R OUTPUT  
> OUTPUT NATIVE~2K  
SHOW OUTPUT STATUS  
SHOW SOURCE STATUS  
SHOW SIZE STATUS  
R SOURCE  
> SOURCE HDMI  
R SIZE  
> SIZE FULL~PANSCAN  
R PICTUREMODE  
R CONTRAST  
R BRIGHTNESS  
R HUE  
> PICTUREMODE STANDARD~USER SHOW PICTURE MODE STATUS  
> CONTRAST 0~100  
> BRIGHTNESS 0~100  
> HUE 0~100  
SHOW CONTRAST STATUS  
SHOW BRIGHTNESS STATUS  
SHOW HUE STATUS  
R SATURATION  
R SHARPNESS  
R NR  
> SATURATION 0~100  
> SHARPNESS 0~100  
> NR OFF~HIGH  
SHOW SATURATION STATUS  
SHOW SHARPNESS STATUS  
SHOW NR STATUS  
R PCHPOSITION  
R PCVPOSITION  
R PCCLOCK  
R PCPHASE  
R COLORTEMP  
> PCHPOSITION 0~100  
> PCVPOSITION 0~100  
> PCCLOCK 0~100  
SHOW PC H-POSITION STATUS  
SHOW PC V-POSITION STATUS  
SHOW PC COLOK STATUS  
SHOW PC PHASE STATUS  
SHOW COLOR TEMP STATUS  
> PCPHASE 0~63  
> COLORTEMP NORMAL~USER  
NOTE: When using the Bypass Modes the only available commands are:  
• S SOURCE commands  
• R SOURCE command  
• INFO command  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RACK MOUNT / TABLETOP INSTALLATION  
Rack mount ears are provided for installation of this unit into an equipment rack.  
Please refer to Figure 1 below. When using the product in a tabletop conguration,  
please install the provided rubber feet as shown in Figure 2.  
*3PCS  
1. Locate the side screws on the unit.  
2. Remove the front 3 screws that are located closest to the front of the unit.  
3. Using the removed screws, screw the rack mounting bracket into the unit.  
4. Repeat the procedure on the opposite side of the unit.  
Figure 2. Desktop Installation  
1. Turn the unit upside down.  
2. Afx rubber feet to the unit, making sure you match up the correct shapes as  
shown in the diagram above.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Video Section  
Input Connectors  
HDMI  
1 – Type A 19pin Female  
VGA  
1 – HD-15 Female  
DVI-I  
DVI-D  
Component  
1 – DVI-I 29pin Female  
1 – DVI-I 29pin Female (Digital)  
2 – 3 RCA  
Input Resolutions  
640x480  
800x600  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(60Hz)HDMI/DVI-I/DVI-D/VGA  
(59/60Hz)HDMI/Component/DVI-D  
(59/60Hz)HDMI/Component/DVI-D  
(50Hz)HDMI/Component/DVI-D  
(50Hz)HDMI/Component/DVI-D  
(50/60Hz)HDMI/Component/DVI-D  
(50/60Hz)HDMI/Component/DVI-D  
(25/29/30/50/59/60Hz)HDMI/  
Component/DVI-D  
1024x768  
1152x864  
1280x800  
1360x768  
1280x960  
1600x1200  
1920x1200  
720x480i  
720x480p  
720x576i  
720x576p  
1280x720p  
1920x1080i  
1920x1080p  
1920x1080p  
(24Hz)HDMI/DVI-D (Passthough)  
Output Connectors  
DVI-I (DVI-A/DVI-D Switchable)  
1
Output Resolutions  
1920x1080p  
2048x1080p  
(23.97/24/50/60Hz) DVI-I  
(23.97/24/50/60Hz) DVI-I  
Component Input Sensitivity  
HDMI Compliancy  
1 Vp-p  
1.2  
HDCP Compliant  
Yes  
Input Colorspace  
HDMI  
VGA  
RGB/YCbCr  
RGBHV  
DVI-I  
DVI-D  
RGBHV/RGB  
RGB  
Component  
YPbPr  
Output Colorspace  
RGB  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Audio Section  
Input Connectors  
HDMI  
1
RCA Type Analog L/R  
Digital Coaxial  
Analog DB-25  
5 (1 per input excluding HDMI)  
5 (1 per input excluding HDMI)  
1
Output Connectors  
Analog DB-25  
1
THD  
< 0.001%  
2Vrms  
Stereo Input Max Voltage  
Output Level  
From Digital Source  
From Analog Source  
-20dBFS 350mVrms  
0dBFS 3.5Vrms  
Frequency Response  
< ± 0.5dB  
Signal-To-Noise Ratio*  
Analog L/R Input  
Digital Input  
>90dB  
>100dB  
>110dB  
Analog DB-25 Input  
*20Hz-20kHz A weight lter, reference to full scale output of 3.5Vrms  
Coaxial Digital Audio Format Support  
2 Channel LPCM  
32kHz – 96kHz  
Multi-Channel AC-3  
2-6 Channels Bitstream  
HDMI Digital Audio Format Support  
2 Channel LPCM  
32kHz – 96kHz  
Multi-Channel AC-3  
8 Channel LPCM  
2-6 Channels Bitstream  
32kHz - 96kHz  
Audio Processing  
Dolby Pro Logic II*  
All analog/digital inputs  
*Analog DB-25 audio inputs bypass all audio processing  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
General Specications  
Operating Temperature  
Control Terminal  
10 - 40° C Non-Condensing/Low Humidity  
RS-232 Serial Communications  
16.9” W x 1.7”H x 8”D  
Dimensions  
Package Dimensions  
Rack Mountable  
18.5” W x 4.5”H x 12”D  
1.5U (Rack Ears Included)  
Estimate 12 lbs./ 9 lbs. (Final TBD)  
Shipping/Unit Weight  
Power  
Universal Power Supply  
Power Output  
100-240Vac, 50/60Hz  
12Vdc  
Power Consumption  
6.67A (80 Watts Max)  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
Gefen warrants the equipment it manufactures to be free from defects in material  
and workmanship.  
If equipment fails because of such defects and Gefen is notied within two (2)  
years from the date of shipment, Gefen will, at its option, repair or replace the  
equipment, provided that the equipment has not been subjected to mechanical,  
electrical, or other abuse or modications. Equipment that fails under conditions  
other than those covered will be repaired at the current price of parts and labor in  
effect at the time of repair. Such repairs are warranted for ninety (90) days from  
the day of reshipment to the Buyer.  
This warranty is in lieu of all other warranties expressed or implied, including  
without limitation, any implied warranty or merchantability or tness for any  
particular purpose, all of which are expressly disclaimed.  
1. Proof of sale may be required in order to claim warranty.  
2. Customers outside the US are responsible for shipping charges to and from  
Gefen.  
3. Copper cables are limited to a 30 day warranty and cables must be in their  
original condition.  
The information in this manual has been carefully checked and is believed to  
be accurate. However, Gefen assumes no responsibility for any inaccuracies  
that may be contained in this manual. In no event will Gefen be liable for  
direct, indirect, special, incidental, or consequential damages resulting from  
any defect or omission in this manual, even if advised of the possibility of such  
damages. The technical information contained herein regarding the features and  
specications is subject to change without notice.  
For the latest warranty coverage information, refer to the Warranty and Return  
PRODUCT REGISTRATION  
Please register your product online by visiting the Register Product page  
under the Support section of the Gefen Web site.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rev E2  
20600 Nordhoff St., Chatsworth CA 91311  
1-800-545-6900 818-772-9100 fax: 
818-772-9120  
Pb  
This product uses UL listed power supplies.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eclipse Fujitsu Ten GPS Receiver avn51D User Manual
Euro Pro Vacuum Cleaner EP903 User Manual
Euro Pro Vacuum Cleaner XSC410 User Manual
Fisher Price Baby Swing 79739 User Manual
Fluke Thermometer 1594A User Manual
Frigidaire Beverage Dispenser beverage cooler User Manual
Fujitsu Laptop RX200 S5 User Manual
Gaggenau Oven EB 204 205 User Manual
GE Monogram Dishwasher ZBD4600 User Manual
GE Monogram Ventilation Hood ZXR8510 User Manual