Gateway Computer Monitor FPD1785 User Manual

USER GUIDE  
Gateway FPD1785/FPD1985 Monitor  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
No power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
No picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Monitor colors are wrong . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Picture has shadows or “ghosts” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Color is not uniform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Image is not sized or centered correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
The monitor has pixels that are always dark or too bright . . . . . . . . . . . 20  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
17-inch monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
19-inch monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Safety, Regulatory, and Legal Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
EPA ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Gateway Flat Panel Monitor  
• Connecting the monitor  
• Adjusting the stand  
• Starting the monitor  
• Adjusting monitor settings  
• Windows controls  
• Power management  
• Maintenance  
• Troubleshooting  
• Specifications  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Gateway Flat Panel Monitor  
Connecting the monitor  
To connect the monitor:  
1 Position your computer and the monitor so you can reach the back of each.  
2 Connect the power cord to the power connector under the back of the  
monitor.  
3 Connect the blue VGA video cable to the blue video connector under the  
back of the monitor.  
- OR -  
If your computer has a digital video connector (DVI), connect a DVI video  
cable (not included) to the white connector under the back of the monitor.  
You can buy a DVI video cable from www.gateway.com.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connecting the monitor  
4 Make sure that your computer is turned off, then connect the other end  
of the video cable to the matching video port on the back of your  
computer.  
5 Plug the power cord into a correctly grounded electrical outlet.  
Warning  
Because lifting your monitor off the  
desktop surface takes weight off from the  
stand, the stand will extend suddenly,  
possibly causing damage to equipment  
or injury to yourself.  
To avoid injury, always lift the monitor so  
that the stand adjusts to its full height  
before moving the monitor or turning it  
around.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Gateway Flat Panel Monitor  
Adjusting the stand  
Rotates 90° for portrait or  
landscape orientation  
Tilts from -5° to 35°  
Pans 31° left and right  
Vertical height adjusts  
five inches  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting the stand  
Rotating the screen image  
Depending on the graphics card or device driver on your computer, you may  
be able to rotate the on-screen image.  
To rotate the screen image:  
On Gateway computers, you can rotate the image by pressing  
CTRL+ALT+[LEFT ARROW], and return it to normal by pressing  
Ctrl+Alt+[UP ARROW].  
For more information, click Start, Control Panel, Appearance and  
Themes (if necessary), Display, the Settings tab, Advanced, then click the  
graphics card-specific tab.  
Adjusting monitor height tension  
The stand is factory adjusted to maintain the adjusted height for Gateway  
17-inch and 19-inch flat-panel monitors. If you use this stand with a lighter  
monitor without adjusting the weight setting of the stand, the stand will raise  
your monitor, and if you use a heavier monitor, the stand will lower your  
monitor.  
To test and adjust your monitor’s height tension:  
1 Move your monitor up and down through its entire vertical range. If it does  
not stay in place when you let go, you need to change the adjustable  
stand’s height tension. You also need to adjust the stand if the amounts  
of force required to raise and lower the monitor are not equal.  
2 Adjust the height tension screw so the monitor stays in place when you  
let go. If the monitor lowers by itself when you let go, turn the screw  
clockwise several complete turns. If the monitor rises when you let go, turn  
the screw counter-clockwise several complete turns. You may need to turn  
the screw several times before the tension is correct for your monitor.  
Increase lifting tension  
(clockwise)  
Decrease lifting tension  
(counter-clockwise)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Your Gateway Flat Panel Monitor  
3 Adjust the height tension screw so raising and lowering forces are equal.  
After the forces are equalized, turn the tension screw clockwise 2 to 4 turns  
to slightly decrease the lifting tension.  
4 For optimum viewing, adjust the height so the top of monitor is about  
1 inch below eye level.  
Adjusting tilt (vertical viewing angle) tension  
To test and adjust tilt tension:  
1 Tilt the monitor back and forth through its entire tilt range. If it does not  
stay in place or if movement in one direction is stiff, the tilt tension needs  
adjustment.  
2 Pull the black rubber cover away from the top of the stand, then hold it  
back with one hand.  
Increase tilt tension (clockwise)  
Decrease tilt tension  
(counter-clockwise)  
3 To increase tilt tension, turn the screw clockwise with a Phillips  
screwdriver. To decrease tilt tension, turn the screw counter-clockwise.  
Adjust until the monitor stays in place and the up and down tilting  
tensions are equal.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting the stand  
Ergonomic guidelines  
The recommended mounting heights, the range of adjustability required to  
provide comfortable use by a range of users, and the forces required for making  
adjustments to the monitor are based upon the following guildelines. These  
guidelines are based on available scientific literature and published standards.  
Screen height  
The recommended screen height for monitors (except in special circumstances,  
such as for bifocal use) is that the top of the monitor should be set at or slightly  
below (about 1 inch, or 25 mm) the user’s eye level while the user is sitting in  
a comfortable working posture. This guideline places the center of the screen  
at an ideal 15° to 20° viewing angle for most desktop monitors. If the monitor  
has multiple users, the screen height should be easily adjustable to  
accommodate each user’s height and preference.  
Screen tilt  
The screen should be tilted so the user’s line of sight is perpendicular to the  
screen. This angle creates the most consistent viewing distance when scanning  
from the top of the screen to the bottom. You may need to adjust lighting to  
avoid screen glare when the screen is tilted upward.  
Screen distance from user  
The monitor screen should first be placed at arms length from the user, then  
adjusted back and forth to suit individual preference. Vertical adjustments  
should not result in a change in viewing distance.  
Stand adjustment forces  
The force required to make any adjustment to the stand (height, tilt, pan, or  
portrait/landscape orientation) should not exceed 5.1 lbs. (2.32 kg).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Gateway Flat Panel Monitor  
Starting the monitor  
To start the monitor:  
Important  
The appearance of your monitor may  
vary from that shown.  
1 Press the power button on the front of monitor. The power LED on the  
power button turns on.  
2 Turn on your computer.  
After your computer is running, the power LED on the monitor’s power  
button should be blue. Allow about 10 seconds for the monitor image to  
appear. If the power LED is not blue or you do not see a monitor image,  
check the connections. For more troubleshooting information, see  
“Troubleshooting” on page 18.  
3 Adjust the tilt of the monitor for the best viewing angle.  
Important  
When adjusting the monitor settings,  
always press the Auto button before  
entering the OSD. This will automatically  
adjust the monitor image to the ideal  
settings for the current screen resolution.  
4 After you see the Windows desktop, press the Auto button on the right  
side of the monitor to automatically adjust your monitor image to the ideal  
settings.  
5 Use the on-screen display (OSD) to adjust other monitor settings. For more  
information, see “Adjusting monitor settings” on page 9.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting monitor settings  
Adjusting monitor settings  
Use the monitor controls (located on the monitor itself) and computer controls  
(accessible through Windows) to adjust the monitor image. For more  
information about computer controls, see “Windows controls” on page 12.  
Monitor buttons  
This monitor features an on-screen display (OSD) that lets you adjust contrast,  
brightness, and other settings for the monitor. The monitor saves changes you  
make to the settings, even if you turn off the monitor.  
Input button  
Auto button  
Brightness button  
Contrast button  
Menu button  
Important  
Input  
The appearance of your monitor may  
vary from that shown.  
OSD active: Press to move to the previous menu.  
OSD inactive: Press to select the video source.  
Auto  
OSD active: Press to open a menu or setting.  
OSD inactive: Press to automatically optimize the monitor’s image  
position, clock, and phase.  
/
(brightness)  
OSD active: Press to move up through menu selections and adjust OSD  
options.  
OSD inactive: Press to adjust the brightness.  
/
(contrast)  
OSD active: Press to move down through menu selections and adjust OSD  
options.  
OSD inactive: Press to adjust the contrast.  
Menu  
Press to open the OSD. Press again to exit the OSD.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Your Gateway Flat Panel Monitor  
On-screen display options  
Adjusting OSD settings  
To adjust the OSD settings:  
Tips & Tricks  
While the OSD is active, on-screen labels  
appear next to the buttons to help you  
identify them.  
1 Press the Auto button. The monitor image is automatically adjusted to the  
ideal settings for your current screen resolution.  
2 Press the Menu button. The OSD menu opens.  
3 Use the and buttons to highlight a setting, then press the  
Auto button to open the selected menu or setting.  
4 Use the and buttons to adjust the setting to the desired level or  
change the option.  
5 Press the Input button to return to a previous menu.  
6 When you have finished making all adjustments, press the Menu button  
at the Main Menu to exit.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting monitor settings  
OSD menus  
OSD Menu  
Description  
Auto—Automatically adjusts your monitor to its optimum  
settings.  
Picture—Opens the Picture menu, where you can adjust  
brightness, contrast, and gamma.  
Main menu  
Main Menu  
Geometry—Opens the Geometry menu, where you can  
adjust image size and minimize distortions.  
Advanced—Opens the Advanced menu, where you can  
adjust color balance, change the OSD language, and display  
information about current monitor settings.  
Reset—Resets the monitor to its factory settings.  
Auto  
Picture  
Geometry  
Advanced  
Reset  
Brightness—Adjusts the amount of light in the darkest  
portion of the picture. Use the lowest brightness setting you  
are comfortable with to maximize the life of the monitor  
backlights.  
Picture menu  
Picture  
You may need to readjust brightness after the monitor has  
warmed up.  
Contrast—Adjusts the level of white between the lightest  
and darkest portions of an image.  
Gamma—Customizes the gamma level. High gamma levels  
increase white levels and low gamma levels increase contrast.  
Brightness  
Contrast  
Gamma  
80  
H-Position—Moves the monitor image left and right.  
V-Position—Moves the monitor image up and down.  
You can also press the Auto button to configure the vertical  
and horizontal position automatically.  
Geometry menu  
Geometry  
Clock—Minimizes any vertical bars or stripes visible on the  
screen background. The horizontal screen size will also  
change.  
Phase—Minimizes any horizontal distortion and clears or  
sharpens the displayed characters.  
H-Position  
V-Position  
Clock  
Phase  
50  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Gateway Flat Panel Monitor  
OSD Menu  
Description  
Color—Customizes the color levels.  
Advanced menu  
Language—Changes the language of the OSD.  
LED Brightness—Changes the brightness of the Standby  
and Power LED to Day Mode or Nite Mode.  
Information—Displays current screen resolution.  
Advanced  
Color  
Language  
LED Brightness  
Information  
Windows controls  
Color depth, screen resolution, and screen fonts are three of the most basic  
monitor settings you may need to change.  
Adjusting the color depth  
Color depth is the number of colors your video card uses. Most images look best  
displayed with the maximum number of colors available.  
Windows lets you choose from several color depth settings for the monitor. We  
recommend that you use the 32-bit True Color setting or the highest setting  
available at all times.  
If the color in your images seems “false” or “jumpy,” especially after you have  
played a game or run a video-intensive program, check the color depth setting  
and return it to 32-bit True Color, if necessary.  
To change the color depth:  
Help & Support  
For more information about adjusting  
monitor settings, click Start, then click  
Help and Support. Type the phrase  
cha n gin g displa y settin gs in the  
Search box, then click the arrow.  
1 Click Start, then click Control Panel. The Control Panel window opens. If  
your Control Panel is in Category View, click Appearance and Themes.  
2 Click/Double-click the Display icon. The Display Properties dialog box  
opens.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Windows controls  
3 Click the Settings tab.  
4 Click the arrow button to open the Color quality list, then click the color  
depth you want.  
5 Click OK, then click Yes to save your changes.  
Adjusting the screen resolution  
You can change the screen resolution to a size you prefer. For example, you can  
increase the resolution to fit more icons on your desktop, or you can decrease  
the resolution to make reading and identifying objects on the monitor easier.  
The higher the resolution, the smaller individual components of the screen  
(such as icons and menu bars) appear.  
To change the screen resolution:  
Help & Support  
1 Click Start, then click Control Panel. The Control Panel window opens. If  
your Control Panel is in Category View, click Appearance and Themes.  
For more information about adjusting  
screen resolution, click Start, then click  
Help and Support. Type the phrase  
cha n gin g screen resolu tion in the  
Search box, then click the arrow.  
2 Click/Double-click the Display icon. The Display Properties dialog box  
opens.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Gateway Flat Panel Monitor  
3 Click the Settings tab.  
4 Drag the Screen resolution slider to the size you prefer.  
5 Click OK, then click Yes to save your changes.  
Clarifying screen fonts  
You can change the display fonts to ClearType for smoother screen fonts.  
To change the display fonts to ClearType:  
1 Click Start, then click Control Panel. The Control Panel window opens. If  
your Control Panel is in Category View, click Appearance and Themes.  
2 Click/Double-click the Display icon. The Display Properties dialog box  
opens.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows controls  
3 Click the Appearance tab.  
4 Click the Effects button. The Effects dialog box opens.  
5 Click to select the Use the following method to smooth the edges of  
screen type check box.  
6 Click the arrow to open the list, then click ClearType.  
7 Click OK, then click OK again.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your Gateway Flat Panel Monitor  
Video modes  
Your monitor supports several video modes. If you do not use the best mode  
for the monitor, the monitor image may look slightly “fuzzy.”  
17-inch monitor  
Mode Mode name and  
resolution  
Horizontal  
Vertical  
frequency (kHz) frequency (Hz)  
1
VGA 720 × 400  
VGA 640 × 480  
VESA 640 × 480  
VESA 640 × 480  
VESA 800 × 600  
VESA 800 × 600  
VESA 800 × 600  
VESA 800 × 600  
VESA 1024 × 768  
VESA 1024 × 768  
VESA 1024 × 768  
VESA 1280 × 1024  
VESA 1280 × 1024  
31.469  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
48.363  
56.476  
60.023  
63.980  
79.976  
70.087  
59.941  
72.810  
75.000  
56.250  
60.317  
72.188  
75.000  
60.004  
70.069  
75.029  
60.020  
75.025  
2
3
4
5
6
7
8
9
10  
11  
12  
13  
19-inch monitor  
Mode Mode name and  
resolution  
Horizontal  
Vertical  
frequency (kHz) frequency (Hz)  
1
2
3
4
5
6
7
8
VGA 720 × 400  
VGA 640 × 480  
VESA 640 × 480  
VESA 640 × 480  
VESA 800 × 600  
VESA 800 × 600  
VESA 800 × 600  
VESA 800 × 600  
31.469  
31.469  
37.861  
37.500  
35.156  
37.879  
48.077  
46.875  
70.087  
59.941  
72.810  
75.000  
56.250  
60.317  
72.188  
75.000  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Power management  
Mode Mode name and  
resolution  
Horizontal  
Vertical  
frequency (kHz) frequency (Hz)  
9
VESA 1024 × 768  
VESA 1024 × 768  
VESA 1024 × 768  
VESA 1280 × 1024  
VESA 1280 × 1024  
48.363  
56.476  
60.023  
63.980  
79.976  
60.004  
70.069  
75.029  
60.020  
75.025  
10  
11  
12  
13  
Power management  
ENERGY STAR  
®
As an ENERGY STAR Partner, Gateway has determined that this product meets  
the ENERGY STAR guidelines for energy efficiency.  
This monitor complies with the EPA’s International ENERGY STAR Program,  
which is a program designed to encourage manufacturers of computer  
equipment to build circuitry into their products to reduce energy consumption  
during time of non-use.  
Energy declaration  
When connected to a computer that supports the VESA Display Power  
Management Signaling (DPMS) Protocol, the monitor can conserve significant  
energy by reducing power consumption during periods of non-use. When your  
computer goes into the energy saving mode, the monitor will then enter the  
Active Off mode (sleep). In the Active Off mode the Power LED will still show  
orange.  
Use these conventions and the power can be reduced to the following levels:  
VESA State  
On  
LED Indicator Power  
Consumption  
Blue  
17-inch: 37 W  
19-inch: 37 W  
Active Off  
Orange  
2 W  
To “wake” the monitor when it is in Active Off mode, move the mouse or press  
any keyboard key.  
Access the power management options in the Control Panel to change the  
period of time after which the monitor enters these low power states.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Your Gateway Flat Panel Monitor  
Maintenance  
To keep the monitor in optimal working order:  
Do not block the ventilation holes.  
Do not expose the monitor to rain or use near water.  
Keep the monitor away from radiators or heat vents.  
Keep the monitor out of direct sunlight.  
Caution  
Do not use any type of abrasive pad or  
glass cleaner. You will permanently  
scratch the screen.  
To clean the monitor, use a soft cloth slightly moistened with water only.  
Wipe the cabinet, screen, and controls.  
Storage specifications in this manual reflect design limitations, not  
recommended storage and humidity. We recommend that for extended  
periods of time (such as in the daily use environment), you store this  
monitor between 32~95°F (0-35°C) and humidity less than 70%.  
Make sure that the monitor is turned off before attaching the power and  
video cords.  
Troubleshooting  
Important  
Make sure that the monitor has warmed  
up for approximately 30 minutes before  
making any judgments about the picture  
quality.  
If you have problems with the monitor, the information in this troubleshooting  
section may help you solve them.  
No power  
Make sure that the power cord is connected correctly to both the back of the  
monitor and the wall outlet. For more information about connecting the power  
cord, see “Connecting the monitor” on page 2.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
No picture  
Press the Input button to make sure that you have selected the correct  
video source.  
Make sure that the power cord is connected correctly to both the back of  
the monitor and the wall outlet. For more information about connecting  
the power cord, see “Connecting the monitor” on page 2.  
Make sure that the video cable is connected securely to the back of the  
monitor and computer. For more information about connecting the video  
cable, see “Connecting the monitor” on page 2.  
Make sure that the monitor is turned on.  
If the power LED is orange:  
Make sure that your computer is turned on.  
Move the mouse or press any key on the keyboard to bring the  
monitor out of sleep mode.  
Restart your computer with the monitor turned on.  
Make sure that the video cable is not damaged.  
Check the end of the video cable for any pins that might be bent  
or pushed in.  
Turn off the monitor and unplug the video cable from the back of your  
computer. Turn the monitor back on and wait for ten seconds. If the  
monitor is functioning correctly, a “No Signal” message appears. For more  
information about connecting the video cable, see “Connecting the  
monitor” on page 2.  
Monitor colors are wrong  
Press the Auto button to automatically adjust the monitor image to the  
ideal settings.  
Restart your computer with the monitor turned on.  
Make sure that the video cable is connected securely to the back of the  
monitor and your computer. For more information about connecting the  
video cable, see “Connecting the monitor” on page 2.  
Make sure that the video cable is not damaged.  
Check the end of the video cable for any pins that might be bent or pushed  
in.  
Picture has shadows or “ghosts”  
Press the Auto button to automatically adjust the monitor image to the  
ideal settings.  
Remove any extension cables or switchboxes.  
Make sure that the video cable is connected securely to the back of the  
monitor and your computer. For more information about connecting the  
video cable, see “Connecting the monitor” on page 2.  
Make sure that the video cable is not damaged.  
Check the end of the video cable for any pins that might be bent or pushed  
in.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Your Gateway Flat Panel Monitor  
Color is not uniform  
Press the Auto button to automatically adjust the monitor image to the  
ideal settings.  
Make sure that the monitor warms up for at least 30 minutes before  
making a final judgment about color uniformity or brightness.  
Image is not sized or centered correctly  
Press the Auto button to automatically adjust the monitor image to the  
ideal settings.  
Use the position controls to adjust the image. For instructions on how to  
adjust the monitor image position, see “Adjusting monitor settings” on  
page 9.  
The monitor has pixels that are always dark or too bright  
This condition is normal and inherent in the TFT technology used in  
active-matrix LCD screens. Gateway’s inspection standards keep these to  
a minimum. If you feel these pixels are unacceptably numerous or dense  
on your monitor, contact Gateway Customer Care to identify whether a  
repair or replacement is justified based on the number of pixels affected.  
Specifications  
Specifications are subject to change without notice or obligation. Many  
products for Gateway and its subsidiaries are custom engineered by our  
suppliers to Gateway specifications and may vary from similarly marketed  
products.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Specifications  
17-inch monitor  
Panel size 17 inches (diagonal)  
Panel type 17-inch viewable TFT with anti-glare coating  
Pixel resolution 1280 × 1024 (native)  
Pixel pitch 0.0104 × 0.0104 inches (0.264 mm × 0.264 mm)  
Aspect ratio 5:4  
Brightness and contrast ratio 280 cd/m2, 1500:1  
Frequencies Horizontal: 31~81 KHz  
Vertical: 56~75 KHz  
Viewing angles 178° horizontal, 178° vertical  
Response time 25 ms  
Lamp type/life 50,000 hours  
Colors 16.7 million  
Color temperature: 6500K  
OSD languages English, French, Spanish, Italian, Japanese  
Connections and inputs Analog (VGA): 15-pin mini d-sub VGA  
Digital (DVI-D): 24-pin DVD-D  
AC power input  
Cables 15-pin mini d-sub analog VGA (included)  
24-pin DVI-D (not included)  
Power consumption Normal operation: 37 W  
Off (power-save): 2 W  
Power input 100-240 VAC, 50/60 Hz  
Power management Energy Star®  
Certifications UL, cUL, FCC Class B, NOM,CE, TUV/GS.  
VCCI and TCO’99 where applicable.  
Wall mount bracket VESA 4 × 3.937 inches (4 × 100 mm)  
Dimensions 14.96 × 14.79~19.91 × 8.72 inches  
(38.02 × 37.57~50.57 × 22.15 cm) with stand  
Weight 12.24 lbs. (5.55 kg)  
Temperature Operating: 41~95°F (5~35°C)  
Non-operating: -4~149°F (-20~65°C)  
Humidity Operating: 65 20% RH  
Non-operating: 10~95% RH  
Altitude Operating: 10,000 ft (3,048 m)  
Non-operating: 40,000 ft (12,192 m)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using Your Gateway Flat Panel Monitor  
19-inch monitor  
Panel size 19 inches (diagonal)  
Panel type 19-inch viewable TFT with anti-glare coating  
Pixel resolution 1280 × 1024 (native)  
Pixel pitch 0.0116 × 0.0116 inches (0.294 mm × 0.294 mm)  
Aspect ratio 5:4  
Brightness and contrast ratio 280 cd/m2, 1000:1  
Frequencies Horizontal: 31~81 KHz  
Vertical: 56~75 KHz  
Viewing angles 178° horizontal, 178° vertical  
Response time 8 ms  
Lamp type/life 50,000 hours  
Colors 16.7 million  
Color temperature: 6500K  
OSD languages English, French, Spanish, Italian, Japanese  
Connections and inputs Analog (VGA): 15-pin mini d-sub VGA  
Digital (DVI-D): 24-pin DVD-D  
AC Power input  
Cables 15-pin mini d-sub analog VGA (included)  
24-pin DVI-D (not included)  
Power consumption Normal operation: 37 W  
Off (power-save): 2 W  
Power input 100-240 VAC, 50/60 Hz  
Power management Energy Star®  
Certifications UL, cUL, FCC Class B, NOM,CE, TUV/GS.  
VCCI and TCO’99 where applicable.  
Wall mount bracket VESA 4 × 3.937 inches (4 × 100 mm)  
Dimensions 16.8 × 16.18~21.30 × 8.72 inches  
(42.66 × 41.10~54.10 × 22 cm) with stand  
Weight 14.88 lbs. (6.75 kg)  
Temperature Operating: 41~95°F (5~35°C)  
Non-operating: -4~149°F (-20~65°C)  
Humidity Operating: 65 20% RH  
Non-operating: 5~90% RH  
Altitude Operating: 10,000 ft (3,048 m)  
Non-operating: 40,000 ft (12,192 m)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety, Regulatory, and Legal Information  
• Important safety information  
• Environmental information  
• Regulatory compliance statements  
• Notices  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important safety information  
Important safety information  
Warning  
Always follow these instructions to help  
guard against personal injury and  
damage to your Gateway product.  
Your Gateway product is designed and tested to meet the latest standards for safety of information technology equipment. However, to  
ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.  
Setting up your system  
Read and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and  
operating instructions for future use.  
Do not use this product near water or a heat source such as a radiator.  
Set up the system on a stable work surface.  
The product should only be operated from the type of power source indicated on the rating label.  
If your product has a voltage selector switch, make sure that the switch is in the proper position for your area. The voltage selector switch  
is set at the factory to the correct voltage.  
Openings in the monitor case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space,  
at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any kind into the  
monitor ventilation openings.  
Some products are equipped with a three-wire power cord to make sure that the product is properly grounded when in use. The plug on  
this cord will only fit into a grounding-type outlet. This is a safety feature. If you are unable to insert the plug into an outlet, contact an  
electrician to install the appropriate outlet.  
If you use an extension cord with this system, make sure that the total ampere rating on the products plugged into the extension cord  
does not exceed the extension cord ampere rating.  
If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the antenna or cable system is electrically  
grounded to provide some protection against voltage surges and buildup of static charges.  
Care during use  
Warning  
To prevent electric shock, never remove  
the cover. No user serviceable parts  
inside. Refer servicing to qualified service  
personnel.  
Do not walk on the power cord or allow anything to rest on it.  
Do not spill anything on the system. The best way to avoid spills is to avoid eating and drinking near your system.  
Do not expose the monitor to rain or use near water. If the monitor does get exposed to moisture, unplug it and allow it to dry for  
24 hours. Call Gateway Customer Care for advice on whether the monitor is safe to turn back on.  
When the monitor is turned off, a small amount of electrical current still flows through the monitor. To avoid electrical shock, always  
unplug all power cables and modem cables from the wall outlets before cleaning the system.  
Unplug the system from the wall outlet and refer servicing to qualified personnel if:  
The power cord or plug is damaged.  
Liquid has been spilled into the system.  
The system does not operate properly when the operating instructions are followed.  
The system was dropped or the cabinet is damaged.  
The system performance changes.  
Replacement parts and accessories  
Warning  
Do not use Gateway products in areas  
classified as hazardous locations. Such  
areas include patient care areas of  
medical and dental facilities,  
Use only replacement parts and accessories recommended by Gateway.  
oxygen-laden environments, or  
industrial facilities.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Environmental information  
Environmental information  
Recycling  
Hg  
Mercury Warning  
Lamp(s) inside this product contain  
mercury and must be recycled or  
disposed of according to local, state, or  
federal laws.  
The product you have purchased contains extracted natural resources that have been used in the manufacturing process. This product may  
contain substances known to be hazardous to the environment or to human health.  
To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, Gateway provides the  
following information on how you can responsibly recycle or reuse most of the materials in your “end of life” product.  
Waste Electrical and Electronic Equipment (commonly known as WEEE) should never be disposed of in the municipal waste  
stream (residential garbage collection). The “Crossed-Out Waste Bin” label affixed to this product is your reminder to dispose  
of your “end of life” product properly.  
Substances such as glass, plastics, and certain chemical compounds are highly recoverable, recyclable, and reusable. You can  
do your part for the environment by following these simple steps:  
When your electrical or electronic equipment is no longer useful to you, “take it back” to your local or regional waste collection  
administration for recycling.  
In some cases, your “end of life” product may be “traded in” for credit towards the purchase of new Gateway equipment. Call Gateway to  
see if this program is available in your area.  
If you need further assistance in recycling, reusing, or trading in your “end of life” product, you may contact us at the Custo mer Care  
number listed in your product’s user guide and we will be glad to help you with your effort.  
Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this  
product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by  
disposing of or recycling used batteries properly.  
With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of  
landfills for the disposal of “end of life” products, and generally improve our quality of life by ensuring that potentially hazardous  
substances are not released into the environment and are disposed of properly.  
EPA ENERGY STAR  
®
As an ENERGY STAR Partner, Gateway has determined that this product meets the ENERGY STAR guidelines for energy efficiency when used  
with a computer equipped with a Display Power Management System.  
ENERGY STAR  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Regulatory compliance statements  
Regulatory compliance statements  
United States of America  
Federal Communications Commission (FCC) Unintentional emitter per FCC Part 15  
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits  
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment  
does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment to an outlet on a different circuit from that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help.  
Compliance Accessories: The accessories associated with this equipment are: shielded video cable. These accessories are required to be  
used in order to ensure compliance with FCC rules.  
FCC declaration of conformity  
Caution  
Changes or modifications not expressly  
approved by Gateway could void the FCC  
compliance and negate your authority to  
operate the product.  
Responsible party:  
Gateway, Inc.  
7565 Irvine Center Drive  
Irvine, CA 92618 USA  
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the following two conditions: (1) this device may  
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired  
operation.  
California  
Proposition 65 Warning  
This product contains chemicals,  
including lead, known to the State of  
California to cause cancer, birth defects  
or reproductive harm.  
Canada  
Industry Canada (IC) Unintentional emitter per ICES-003  
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference  
regulations of Industry Canada.  
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B  
prescrites dans le règlement sur le brouillage radioélectrique édicté par Industrie Canada.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notices  
Notices  
© 2006 Gateway, Inc.  
All rights reserved.  
Gateway, Inc.  
7565 Irvine Center Drive  
Irvine, CA 92618 USA  
All Rights Reserved  
This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any  
form, without prior consent in writing from Gateway.  
The information in this manual has been carefully checked and is believed to be accurate. However, changes are made periodically. These  
changes are incorporated in newer publication editions. Gateway may improve and/or change products described in this publication at any  
time. Due to continuing system improvements, Gateway is not responsible for inaccurate information which may appear in this manual. For  
the latest product updates, consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect,  
special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the  
possibility of such damages.  
In the interest of continued product development, Gateway reserves the right to make improvements in this manual and the products it  
describes at any time, without notices or obligation.  
Trademark Acknowledgments  
Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands  
and product names are trademarks or registered trademarks of their respective companies.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notices  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAN FPD1785/1985 USR GDE R0 4/06  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Exmark Lawn Mower OCD02 User Manual
Fluke Thermometer 80PK 1 User Manual
Fluke Thermometer 5626 5628 User Manual
Furuno Marine RADAR FR 2115 2125 User Manual
GE Food Warmer JKD915 User Manual
Gemini Musical Instrument PDM 24s User Manual
Gemini Musical Instrument ps 02usb User Manual
Generac Power Systems Portable Generator 005221 0 User Manual
Gianni Industries Door GL 1200S series User Manual
Glen Dimplex Home Appliances Ltd Gas Grill BI 70 G User Manual