GLO™ GLONASS and GPS Sensor
Instructions
August 2012
190-01492-00_0B
Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
Status LeD
Pairing the Sensor
Hold to turn on the sensor.
1
2
LeD
Description
Slow flashing orange Charging
Turn on the other device and enable
the Bluetooth component.
Solid orange
Battery charged,
power connected.
You can refer to the device’s
documentation for specific instructions
about enabling Bluetooth wireless
technology.
Orange off
Battery charged,
power disconnected.
Rapid flashing orange Low battery
Alternating orange
and green
Faulty battery or
system error
Bring the sensor within 30 feet (10
meters) of the mobile device.
3
4
Flashing green
Searching for GPS
satellites
Using the mobile device, pair the
sensor with the mobile device.
Solid green
GPS satellite fix
The blue LED is solid blue when the
sensor is connected to the other device.
acquiring Satellite Signals
If the sensor has not established a
Bluetooth connection for several minutes,
it turns off automatically.
Verify that the blue LED on the sensor
is solid blue, indicating a wireless
connection.
1
Bluetooth LeD
Place the sensor where it has a clear
view of the sky.
2
LeD
Description
Acquiring satellite signals may take a
few minutes. The Status LED flashes
green while searching for satellites and
establishing your location. The Status LED
is solid green when it has established a fix
on your location.
Slow flashing Searching for mobile devices
blue
Rapid flashing Pairing
blue
Solid blue
Connected to mobile device
3
Download from Www.Somanuals.com. All Manuals Search And Download.
not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the
use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
Using the Portable Friction
Mount
The portable friction mount comes in
some GLO packages and is available as
an optional accessory.
The GLO sensor is also compatible with
many Android®, Windows® or Blackberry®
smartphones, tablets and notebook
computers.
Wipe the mounting surface and the
back of the mount with a wet cloth to
remove dust and debris.
1
2
3
Insert the sensor in the mount so the
LEDs face up and the mini-USB port is
accessible.
When using the GLO GPS/GLONASS
sensor with an Android device, you
may need to use an application to allow
the sensor to properly communicate
with the Android system over Bluetooth
technology. The application will allow the
Android system to accept non-system (or
mock) GPS/GLONASS signals.
Place on a flat surface.
Periodically, you should wipe the surface
and the mount with a wet cloth to remove
dust and debris to help prevent the mount
from sliding.
registering the Device
Product Compatibility
•
•
Made for iPod® touch (4th generation),
iPod touch (3rd generation), iPhone® 4S,
iPhone 4, iPhone 3GS, iPad® 2, and iPad.
Keep the original sales receipt, or a
photocopy, in a safe place.
"Made for iPod, iPhone, iPad” means
that an electronic accessory has been
designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has
been certified by the developer to meet
Apple performance standards. Apple is
Specifications
Case: Rugged, but not water-resistant
Power Supply: Rechargeable lithium-ion
battery, 12 hours (typical use)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Update rate: 10 Hz, but not all mobile
devices support a 10 Hz update rate.
➋. Do not place the device in front of or
above any airbag ➌.
Vehicle Power Cable* Input Voltage:
12–28 Vdc (*available in some packages)
➊
➋
operating temperature: -4°F to 140°F
(-20°C to 60°C)
➌
Charging temperature: 32°F to 113°F
(0°C to 45°C)
Battery Warnings
If these guidelines are not followed, the
battery may experience a shortened life
span or may present a risk of damage to
the sensor, fire, chemical burn, electrolyte
leak, and/or injury.
Short-term (1 month) Storage
temperature: -4°F to 122°F (-20°C to
50°C)
Long-term (1 year) Storage
temperature: -4°F to 68°F (-20°C to
20°C)
•
Do not leave the sensor exposed to a
heat source or in a high temperature
location, such as in the sun in an
unattended vehicle. To prevent the
possibility of damage, remove the
device from the vehicle or store it out
of direct sunlight, such as in the glove
box.
Important Safety and Product
Information
WarnIng
Installation Warnings
•
•
•
Do not use a sharp object to remove
the battery.
When installing the device in a vehicle,
place the device securely so it does not
obstruct the driver’s view of the road ➊ or
interfere with vehicle operating controls,
such as the steering wheel, foot pedals,
or transmission levers. Do not place
unsecured on the vehicle dashboard
Do not disassemble, puncture,
incinerate, or damage the battery.
Keep the battery away from children.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
If using an external battery charger,
only use the Garmin accessory
approved for your product.
used to determine ground proximity for
aircraft navigation.
Product environmental Programs
Only replace the battery with the
correct replacement battery. Using
another battery presents a risk of
fire or explosion. To purchase a
replacement battery, see your Garmin
dealer or the Garmin website.
Information about Garmin’s product
recycling program and WEEE, RoHS,
REACH, and other compliance programs
can be found at www.garmin.com
•
When storing the device for an
extended time, store within the
following temperature range: from -4°F
to 68°F (-20°C to 20°C).
Declaration of Conformity
Hereby, Garmin, declares that this
product is in compliance with the
essential requirements and other relevant
provisions of Directive 1999/5/EC. To view
the full Declaration of Conformity, go to
•
•
Do not operate the device outside of
the following temperature range: from
-4°F to 140°F (-20°C to 60°C).
Contact your local waste disposal
department to dispose of the device/
battery in accordance with applicable
local laws and regulations.
FCC Compliance
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
navigation Warnings
Use this sensor only as a navigational aid.
Do not attempt to use the sensor for any
purpose requiring precise measurement
of direction, distance, location, or
topography. This product should not be
This equipment has been tested and
found to comply with the limits for a
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Class B digital device, pursuant to
This product does not contain any user-
serviceable parts. Repairs should only be
made by an authorized service center.
Unauthorized repairs or modifications
could result in permanent damage to the
equipment, and void your warranty and
your authority to operate this device under
Part 15 regulations.
part 15 of the FCC rules. These limits
are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses, and can radiate radio
frequency energy and may cause harmful
interference to radio communications if
not installed and used in accordance with
the instructions. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio
or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one of the
following measures:
Industry Canada Compliance
Category I radiocommunication devices
comply with Industry Canada Standard
RSS-210. Category II radiocommunication
devices comply with Industry Canada
Standard RSS-310. This device complies
with Industry Canada license-exempt RSS
standard(s). Operation is subject to the
following two conditions: (1) this device
may not cause interference, and (2) this
device must accept any interference,
including interference that may cause
undesired operation of the device.
•
•
•
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and the receiver.
Limited Warranty
Connect the equipment into an outlet
that is on a different circuit from the
GPS unit.
Garmin’s standard limited warranty applies
to this accessory. For more information,
•
Consult the dealer or an experienced
radio/TV technician for help.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
913-397-8200
1-800-800-1020
0808 238 0000
1-866-429-9296
+44 870 850 1242
43 (0) 3133 3181 0
00 331 55 69 33 99
815 69 555
00 32 2 672 52 54
00 45 4810 5050
00 358 9 6937 9758
0800-0233937
0180 5 / 42 76 46 - 880
00 39 02 3669 9699
00 35 1214 447 460
00800 4412 454
+44 2380 662 915
00 34 902 007 097
00 46 7744 52020
Garmin® and the Garmin logo are trademarks of Garmin Ltd.
or its subsidiaries, registered in the USA and other countries.
GLO™ is a trademark of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express permission of
Garmin.
garmin International, Inc
1200 East 151st Street,
Olathe, Kansas 66062, USA
The Bluetooth® word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Garmin is under license.
iPad, iPhone, iPod, and iPod touch are trademarks of Apple
Inc., registered in the USA and other countries. Android™ is a
trademark of Google Inc. Windows® is a registered trademark of
Microsoft Corporation in the United States and other countries.
BlackBerry is registered with the U.S. Patent and Trademark
Office and may be pending or registered in other countries.
garmin (europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire, SO40 9LR UK
garmin Corporation
No. 68, Zhangshu 2nd Road, Xizhi Dist.
New Taipei City, 221, Taiwan (R.O.C.)
© 2012 Garmin Ltd. or its subsidiaries
Download from Www.Somanuals.com. All Manuals Search And Download.
|