®
rino 600 series
owner’s manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Tracksꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ16
Navigating a Saved Trackꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ17
Table of Contents
Getting Started������������������������3
Keysꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ3
Manual Conventionsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ4
Battery Informationꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ4
Acquiring Satellite Signalsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ6
Registering Your Deviceꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ6
Turning On the Backlightꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ6
Locking the Screenꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ7
Navigation �����������������������������18
Navigating to a Destinationꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ18
Mapꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ19
Compass ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ19
Navigating to a Contactꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ21
Geocaches ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ21
Routesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ21
Using Sight ‘N Goꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ23
Radio����������������������������������������8
About the Radioꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ8
Choosing a Channelꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ8
Radio Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ9
About Contactsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ10
Notesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ10
About Peer-to-Peer Positioningꢀꢀꢀ11
Using SAME Weather Alertsꢀꢀꢀꢀꢀꢀꢀꢀ12
Radio Page Status Indicatorsꢀꢀꢀꢀꢀꢀ13
Camera and Photos��������������24
Taking a Photoꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ24
Viewing Photosꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ24
Customizing Your Device ����26
Customizing the Data Fieldsꢀꢀꢀꢀꢀꢀꢀꢀ26
Customizing the Home Screenꢀꢀꢀꢀ26
Creating a Custom Profile ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ26
Customizing Specific Pagesꢀꢀꢀꢀꢀꢀꢀꢀ27
System Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ28
Display Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ29
Setting the Device Tonesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ29
Waypoints and Tracks����������15
Waypointsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ15
About Sharing Dataꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ16
Rino 600 Series Owner’s Manual
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Map Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ29 Viewing Device Informationꢀꢀꢀꢀꢀꢀꢀꢀꢀ39
Tracks Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ30 Specifications ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ39
Changing the Units of Measureꢀꢀꢀ31 About the Batteriesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ40
Time Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ31 Caring for the Deviceꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ41
Position Format Settings ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ32 Data Managementꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ42
Heading Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ32 Additional Mapsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ45
Altimeter Settings ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ33 Optional Accessoriesꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ45
Geocache Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ34 Data Field Optionsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ46
Routing Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ34 Troubleshootingꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ51
Marine Map Settingsꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ35 FCC Licensing Informationꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ53
Fitnessꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ36
Resetting Dataꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ36
Index��������������������������������������54
Tools ��������������������������������������37
Trip Computerꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ37
Elevation Plotꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ37
Viewing the Calendar and
Almanacs ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ37
Calculating the Size of an Area ꢀꢀꢀ37
Setting an Alarmꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ38
Opening the Stopwatchꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ38
Device Information���������������39
Updating the Softwareꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ39
2
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Keys
Getting Started
WaRNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
➊
➌
When using your device the first time,
you should complete the following
tasks to set up the device and get to
know the basic features.
➋
Key
Description
Select to send out a call
toneꢀ If enabled
sends your position when
releasedꢀ
➊
Rino 600 Series Owner’s Manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Installing the Lithium-ion
Battery
note: The lithium-ion battery pack
can be used only with the Rino® 650
and 655t.
Hold to turn on or off
the deviceꢀ Select to
adjust backlight, volume,
squelch level, and to lock
or unlock the screenꢀ
➋
Hold to talkꢀ PTT stands
for push-to-talkꢀ
➌
1. Locate the battery pack
➊
that
came in the product box.
Manual Conventions
All the pages are found on the home
screen. Use or
to scroll through
the pages. The small arrows (>) used in
the text indicate that you should select
a series of items in order, for example,
“Select Delete > Yes.”
➊
Battery Information
The device operates on the included
lithium-ion battery pack or four AA
batteries.
2. Align the metal contacts on the
battery pack with the metal contacts
on the back of the device.
For tips on maximizing battery life and
3. Gently press the battery pack into
place.
4
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
4. Turn the D-ring clockwise.
Charging the Lithium-ion
Battery
➊
Before you use the device the first
time, charge the battery.
Charging a fully depleted battery takes
6 hours. The device will not charge
when outside the temperature range
from 32°F to 113°F (from 0°C to
45°C).
4. Charge the device completely.
A fully charged battery can run for
up to 14 hours before it must be
recharged.
1. Plug the AC charger into a standard
wall outlet.
Installing aa Batteries
2. Lift weather cap.
Instead of the lithium-ion battery pack,
you can use alkaline, NiMH, or lithium
batteries. This is especially handy
when you are on the trail and cannot
charge the lithium-ion battery pack.
Use NiMH or lithium batteries for best
results.
3. Plug the small end of the AC
charger into the two-pin connector
➊.
1. Turn the D-ring counter-clockwise,
and remove the cover.
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Getting Started
2. Lift the latch on the cover to
separate the battery compartment.
3. Wait while the device searches for
satellites.
3. Insert four AA batteries, observing
polarity.
A question mark flashes while the
device determines your location.
The GPS bars indicate satellite
strength. When the bars are green, the
device has acquired satellite signals.
Registering Your Device
•
•
Keep the original sales receipt, or a
photocopy, in a safe place.
4. Replace the battery cover, and turn
the D-ring clockwise.
Turning On the Backlight
The backlight will turn off after a
period of inactivity. To change the
5. Update the battery type in the
acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
•
•
Select
.
Touch the screen.
Alerts and messages also activate the
backlight.
1. Go outdoors to an open area.
2. Turn on the device.
6
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
adjusting the Backlight
Brightness
The backlight levels vary for the
different power sources. For example,
the highest backlight setting while
running on AA batteries is lower
than the highest while running on the
lithium-ion battery. This is to extend
the AA battery life.
1. While the device is on, select
.
2. Use + and - to adjust the brightness
level.
Locking the Screen
note: This action does not lock the
keys.
1. Select
.
2. Select Lock Screen.
Rino 600 Series Owner’s Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
Muting the Radio
1. Select
Radio
.
The radio page provides the user
interface for Family Radio Service
(FRS) and General Mobile Radio
Service (GMRS) radio operations.
2. Select Volume.
Choosing a Channel
1. Select Radio > Channel.
2. Use + or - to select a channel.
about the Radio
The Rino has a total of 30 channels and Scanning Channels
121 squelch codes.
You can scan the channels for voice
activity.
Frequency
Channel
Select Radio > Scan.
1-7
GMRS and FRS
channelsꢀ
Setting Up a Scan List
8-14
FRS channelsꢀ
You can pick which channels and codes
to scan. Selecting specific channels and
codes reduces the scan time and helps
prevent missing a transmission.
15-22
GMRS channelsꢀ
15R-22R
Repeater channels
1. Select
> Setup Scanlist.
GMRS frequencies are regulated by the
FCC. In order to transmit on GMRS
frequencies, you must obtain a license
2. Select a channel to add.
3. Select
.
8
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
•
Squelch tone Mode:
Monitoring for activity
You can monitor a single channel for
any activity, including static and weak
voice signals. This is helpful if a signal
is going out of range.
◦
CtCSS—Continuous Tone
Controlled Squelch System
allows you to ignore unwanted
calls from persons using the
same channel.
Select Radio > Monitor.
◦
DCS—Digital-Coded Squelch
allows you to ignore unwanted
calls from persons using the
same channel.
Radio Settings
Select
> Setup Radio.
•
Send Location—enables you to
send your current location after
•
•
Repeater Channel—enables the
GMRS repeater channels 15R-22R.
GMRS repeater channels are
not available on devices sold in
Canada. Position reporting is not
allowed by the FCC on repeater
channels.
•
Allow Polling—enables polling.
Polling allows another Rino user to
get your location by sending a poll
request.
•
•
Power Level—adjusts power level
on GMRS frequencies.
Headset type—allows you to
select the type of headset you are
using. To purchase accessories, go
your Garmin dealer.
Weather Alert—allows you to
search for weather alerts on the
current channel or all available
channels.
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Radio
•
Vox Level—Voice operated
transmission controls the sensitivity
level of any Vox accessory.
Viewing Contacts on the Map
1. Select Contacts.
2. Select a contact.
3. Select View Map.
about Contacts
The first time a signal is received from
another Rino user, the new contact
page appears. From that page, you
can show their location on the map,
add them to your contacts list.
Notes
note: Notes transmit to all users on
your current channel and code.
You can send notes to other Rino users
on your current channel and code. You
can review previously received notes
from your contacts. You can edit and
save favorite notes to quickly send
them later.
adding a New Contact
When a new contact signal is received,
the new contact page appears.
Select oK to save the contact.
Creating a Note
Editing Contacts
1. Select Contacts.
1. Select notes > <Send note> <new
note>.
2. Select a contact.
3. Select an item.
2. Write the note.
The maximum character limit is 13.
4. Select
.
3. Select
.
4. Select an option:
10
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
•
Select Send note to send
without saving.
Enabling Peer-to-Peer
Positioning
Select Setup > Radio > Send
Location > on.
•
•
Select Save.
Select Send and Save.
Sending a Location
Sending a Favorite Note
1. Select notes > <Send note>.
Before you can send a location, you
must enable peer-to-peer positioning
2. Select a note to send.
3. Select Send note.
1. Select Share Wirelessly > Send.
2. Select Use FRS/GMRS.
3. Select a category.
about Peer-to-Peer
Positioning
note: Locations may only be sent
once every 30 seconds, due to FCC
restrictions.
4. Select an item.
5. Select Send.
You can send your location to another
Rino using peer-to-peer positioning.
You can also track the movement of
other Rino users and navigate to their
locations.
Rino 600 Series Owner’s Manual
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
Viewing SaME Weather alerts
on the Map
When you receive a SAME weather
alert, a message appears containing the
alert information. The device shows
your county map with color-coded
watches and warnings.
Using SaME Weather
alerts
note: SAME weather alerts are
available in the US only on the Rino
650 and 655t.
SAME (Specific Area Message
Encoding) weather alerts allow you to
receive county weather alerts on your
device.
Select Weather Map to view the
weather alert on the map.
You can scan over a county warning
on the map and select the information
button to see more detailed
information.
1. From the radio page, select
Weather.
2. Select a channel.
note: You can receive SAME
weather alerts only on the current
weather channel.
The weather radio must remain on
until alerts are received.
12
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio
Radio Page Status
Indicators
Receiving
weather
The device is
receiving a weather
broadcastꢀ
Message
Description
Activity on
channel
A signal is being
received, but does
not match the current
codeꢀ
Radio Status Description
Radio --
Radio feature is offꢀ
Radio 1/2W Transmit power at
1/2 wattsꢀ FRS
Radio Off
The 2-way radio is
turned offꢀ
channels transmit on
this level onlyꢀ
Ready to
transmit of
FRS
FRS channel is
selected and the
device can transmitꢀ
Radio 1W
Radio 2W
Radio 5W
Transmit power at
1 wattsꢀ
Transmit power at
2 wattsꢀ
Ready to
transmit on
GMRS
GMRS channel is
selected and the
device can transmitꢀ
Transmit power at
5 wattsꢀ
Receiving
The device
transmission
is receiving a
transmission on the
selected channelꢀ
note: If your device battery is too
low, the power level is decreased
automatically. The transmit power
is limited to 2 watts in Canada. The
maximum output power of the Rino
610 is 1 Watt.
Ready to
receive
weather
The device is set to
a weather channel
and waiting to receive
weather broadcastꢀ
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Radio
Status Bar Description
The radio is onꢀ
The radio is receivingꢀ
The radio is transmittingꢀ
Peer-to-peer is enabled
and is ready to transmit
the positionꢀ
Weather alert is turned
onꢀ
The radio is muted
14
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Waypoints and Tracks
5. Select
.
Waypoints and Tracks
Deleting a Waypoint
1. Select Waypoint Manager.
Waypoints
Waypoints are locations you record and
store in the device.
2. Select a waypoint.
3. Select Delete Waypoint.
Creating a Waypoint
You can save your current location as
a waypoint.
Increasing the accuracy of a
Waypoint Location
Waypoint averaging allows you to
increase the accuracy of a waypoint
location by collecting multiple samples
of the waypoint location.
Select Mark Waypoint.
Finding a Waypoint
1. Select Where to? > Waypoints.
1. Select Waypoint Averaging.
2. Select a waypoint.
3. Move to the location.
4. Select Start.
2. Select a waypoint.
Editing a Waypoint
Before you can edit a waypoint, you
must create a waypoint.
5. When the sample confidence status
1. Select Waypoint Manager.
2. Select a waypoint.
bar reaches 100%, select Save.
For best results, collect four to
eight samples for the waypoint,
waiting at least 90 minutes between
samples.
3. Select an item to edit.
4. Enter the new information.
Rino 600 Series Owner’s Manual
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Waypoints and Tracks
Managing Track Log Recording
1. Select Setup > tracks > track
Log.
about Sharing Data
Your device can send or receive data
when connected to another compatible
device. You can share waypoints,
geocaches, routes, and tracks.
2. Select Record, Do not Show or
Record, Show on Map.
If you select Record, Show on
Map, a line on the map indicates
your track.
Sending and Receiving Data
Wirelessly
Before you can share data wirelessly
using ANT+™ wireless technology, you
must be within 10 feet (3 m) of the
compatible Garmin device.
3. Select Record Method.
4. Select an option:
•
To record tracks at a variable
rate that creates an optimum
representation of your tracks,
select Auto.
1. Select Share Wirelessly.
2. Follow the on-screen instructions.
•
•
To record tracks at a specified
distance, select Distance.
Tracks
A track is a recording of your path.
The track log contains information
about points along the recorded path,
including time, location, and elevation
for each point.
To record tracks at a specified
time, select time.
5. Select Recording Interval.
6. Select an option to record tracks
more or less often.
16
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Waypoints and Tracks
note: Using the Most often
interval provides the most track
detail and fills up the device
memory quicker.
•
Select Save Portion, and select
a portion.
Clearing the Current Track
Select Setup > Reset > Clear
Current track > Yes.
Viewing the Current Track
The track being recorded is called the
current track.
Deleting a Track
1. Select track Manager.
1. Select track Manager > Current
track.
2. Select a track.
3. Select Delete > Yes.
2. Select an option:
•
To show the current track on the Navigating a Saved Track
map, select View Map.
You must record and save a track
before you can navigate using it.
•
To show the elevation plot
for the current track, select
elevation Plot.
1. Select track Manager.
2. Select a saved track.
3. Select View on Map.
4. Select Go.
Saving the Current Track
1. Select track Manager > Current
track.
2. Select what you want to save:
•
Select Save track.
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Navigation
2. Select an item you want to search
near.
Navigation
3. Select Use.
Navigating to a
Destination
You can use the Where To? menu to
find a destination to navigate to. Not all
Where To? categories are available in
all areas and maps.
Starting a TracBack®
You can navigate back to the beginning
of a track. This can be helpful when
finding your way back to camp or the
trail head.
1. Select Where to?.
2. Select an item.
3. Select Go.
1. Select track Manager > Current
track > View Map.
2. Select tracback.
The map page opens with your
route marked with a magenta line.
Searching Near a Location
You can use the search feature to find
POIs near a point on the map, your
current location, or a waypoint. This
may require additional maps, see
1. Select Where to? >
.
18
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation
Calibrating the Compass
Map
represents your location on the map.
notice
As you travel, the moves. When you
are navigating to a destination, your
route is marked with a magenta line.
Calibrate the electronic compass
outdoors. Do not stand near objects that
influence magnetic fields, such as cars,
buildings, or overhead power lines.
To customize the map settings, see
page 29. To customize the map
You should calibrate the compass after
moving long distances, experiencing
temperature changes, or changing the
batteries.
Using the Map
You can use the map to navigate an
active route.
1. From the compass page, touch and
hold the middle of the compass.
1. Select Map.
2. Follow the on-screen instructions.
2. Follow the magenta line to your
destination.
Navigating with the Bearing
Pointer
When navigating to a destination,
the bearing pointer points to your
destination, regardless of the direction
you are moving.
Compass
The device has a 3-axis compass. You
can use a bearing pointer or a course
pointer to navigate to your destination.
1. Begin navigation to a destination
To customize the compass settings, see
Rino 600 Series Owner’s Manual
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation
2. Select Compass.
As you drift from the intended course
to the destination, the course deviation
3. Turn until points toward the
top of the compass, and continue
moving in that direction to the
destination.
indicator
➍
(CDI) provides the
indication of drift (right or left) from
the course.
The scale
between dots on the course deviation
indicator.
➌
refers to the distance
about the Course Pointer
The course pointer is most useful if you
are navigating on water or where there
are no major obstacles in your path.
Navigating with the Course Pointer
Before you can navigate with the
course pointer, you must change the
pointer setting to Course (CDI)
➋
➌
➊
1. Begin navigation to a destination
➍
2. Select Compass.
3. Use the course pointer to navigate
The course pointer
relationship to a course line
➊
indicates your
leading
➋
to the destination. The course line
to your destination is based on your
original starting point.
20
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation
5. Follow the on-screen instructions
Navigating to a Contact
Before you can navigate to a contact,
to find and download geocaches to
your device.
Navigating to a Geocache
1. Select Geocaches.
1. Select Contacts.
2. Select a contact.
2. Select Find a Geocache.
3. Select a geocache.
4. Select Go.
3. Select View Map > Go.
Geocaches
Geocaching is a type of treasure
hunting, in which geocachers seek
hidden treasures using GPS coordinates
posted on the Internet by those hiding
the geocache.
Routes
A route is a sequence of waypoints that
leads you to your final destination.
Creating a Route
1. Select Route Planner > Create
Route > Select First Point.
Downloading Geocaches
1. Connect your device to a computer
2. Select a category.
3. If necessary, create an account.
4. Sign in.
3. Select the first point in the route.
4. Select Use > Select next Point.
5. Repeat steps 2–4 until the route is
complete.
Rino 600 Series Owner’s Manual
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation
A route must contain at least two
points.
•
•
To add an additional point on
the route, select Insert.
6. Select
to save the route.
The additional point is inserted
before the point you are editing.
Editing the Name of a Route
1. Select Route Planner.
To remove the point from the
route, select Remove.
2. Select a route.
6. Select
to save the route.
3. Select Change name.
4. Enter the new name.
Viewing a Route on the Map
1. Select Route Planner.
5. Select
.
2. Select a route.
Editing a Route
1. Select Route Planner.
3. Select View Map.
Deleting a Route
1. Select Route Planner.
2. Select a route.
3. Select edit Route.
4. Select a point.
2. Select a route.
3. Select Delete Route.
5. Select an option:
•
To view the point on the map,
select Review.
•
To change the order of the point
on the route, select Move Down
or Move Up.
22
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation
4. Use the compass to navigate to the
object.
Viewing the active Route
1. While navigating a route, select
Active Route.
Starting Navigation to a Man
Overboard Location
You can save a man overboard (MOB)
location, and start navigation back to it.
2. Select a point in the route to view
additional details.
Reversing a Route
1. Select Route Planner.
1. Select Man overboard > Start.
2. Select a route.
The map page opens with your
route marked with a magenta line.
3. Select Reverse Route.
Using Sight ‘N Go
You can point the device at an object in
the distance, such as a lighthouse, lock
in the direction, and then navigate to
the object.
Stopping Navigation
Select Where to? > Stop
navigation.
1. From the main menu, select
Sight ‘n Go.
2. Point the device at an object.
3. Select Lock Direction > Set
Course.
Rino 600 Series Owner’s Manual
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Photos
Viewing Photos
Camera and Photos
You can view photos you have taken
you have transferred to the device
You can take photos with the Rino
655t. When you take a photo, the
geographic location is automatically
saved in the photo information. You
can navigate to the location like a
1. Select Photo Viewer.
2. Select and to view all the
photos.
Taking a Photo
1. Select Camera.
3. Select a photo to see a larger view
of it.
2. Turn the device horizontally or
vertically to change the orientation
of the photo.
Sorting Photos
1. Select Photo Viewer.
2. Select
.
3. If necessary, select + or - to zoom
in or out.
3. Select Most Recently, near a
Location, or on a Specific Date.
4. Select
to take a photo.
Viewing the Location of a
Photo
1. Select Photo Viewer.
2. Select a photo.
3. Select
.
24
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera and Photos
Deleting a Photo
1. Select Photo Viewer.
2. Select a photo.
3. Select
> Yes.
Navigating to a Photo
1. Select Where to? > Photos.
2. Select a photo.
3. Select Go.
Uploading and Downloading
Photos
Before you can upload photos to
Garmin Connect, you must sign up for
a myGarmin account.
log into your myGarmin account.
2. Connect your device to the
3. Follow the on-screen directions to
upload or download photos.
Rino 600 Series Owner’s Manual
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
3. Select an option:
Customizing Your
Device
•
Select a new position for the
icon.
•
Select
to delete the icon.
Customizing the Data
Fields
You can customize the data fields that
appear on the screen. For data field
Creating a Custom Profile
You can customize your settings and
data fields for a particular activity or
trip.
1. Select a data field to change.
1. Customize the settings as necessary
2. Select a data field data field from
the list.
2. Customize the data fields as
Customizing the Home
Screen
You can customize the pages as they
appear on your device home screen.
3. Select Setup > Profiles.
4. Select Create new Profile > oK.
Editing a Profile Name
1. Select Setup > Profiles.
1. Select Setup > Main Menu.
2. Select a profile.
2. Select an icon you want to edit.
3. Select edit name.
4. Enter the new name.
5. Select
.
26
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
Deleting a Profile
1. Select Setup > Profiles.
Changing the Data Fields
Before you can change the map fields,
2. Select a profile.
3. Select Delete.
1. Open the page for which you will
change the data fields.
Customizing Specific
Pages
You can customize the data and
dashboards of the map, compass, trip
computer, and elevation plot.
2. Select a data field to customize.
3. Select a data field type.
For data field descriptions, see
about Dashboards
Each dashboard shows different
information about your route or your
location.
Enabling the Map Data Fields
By default, the map does not show data
fields. You must enable the data fields
before you can edit them.
Customizing Dashboards
1. Open the page for which you want
to customize the dashboard.
1. Select Setup > Map > Data Fields.
2. Select the number of data fields to
display.
2. Select an option:
•
For the trip computer and
compass, select
.
•
For the map, select Setup >
Map.
Rino 600 Series Owner’s Manual
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
◦
Garmin Spanner—allows
you to use the USB port with
most NMEA 0183-compliant
mapping programs by creating a
virtual serial port.
3. Select a dashboard.
System Settings
Select Setup > System.
•
GPS—sets the GPS to normal,
WAAS/eGnoS (Wide Area
Augmentation System/European
Geostationary Navigation Overlay
Service), or Demo Mode (GPS
off). For information about WAAS,
go to www.garmin.com/aboutGPS
◦
◦
◦
◦
Garmin Serial—Garmin
proprietary format used to
provide PVT protocol data.
nMeA In/out—provides
standard NMEA 0183 output
and input.
text out—provides simple
ASCII text output of location
and velocity information.
•
Language—sets the text language
on the device.
RtCM—Radio Technical
Commission for Maritime
Services allows the device
to accept DGPS Differential
Global Positioning System
information from a device
supplying RTCM data in an
SC-104 format.
note: Changing the text language
does not change the language of
user-entered data or map data, such
as street names.
•
•
Battery type—allows you to select
the type of battery you are using.
Interface—sets the format of the
serial interface:
28
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
1. Select Setup > Display > Screen
Calibration.
Display Settings
Select Setup > Display.
2. Follow the on-screen instructions.
•
Backlight timeout—adjusts the
length of time before the backlight
turns off.
Setting the Device Tones
You can customize tones for messages,
keys, turn warnings, and alarms.
note: To adjust the backlight
1. Select Setup > tones.
•
•
•
Background Color—sets the color
used on the device screen.
2. Select a tone for each audible type.
Screen Capture—allows you to
take screen captures on the device.
Map Settings
Select Setup > Map.
Battery Save—turns the screen
off after a period of inactivity to
prolong the battery life.
•
orientation—adjusts how the map
is shown on the page.
•
◦
◦
north Up—shows north at the
top of the page.
Calibrating the Touchscreen
The screen does not normally require
calibration. However, if the screen does
not seem to be responding properly,
calibrate the touchscreen.
track Up—shows your current
direction of travel toward the
top of the page.
Rino 600 Series Owner’s Manual
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
◦
Automotive Mode—shows an
◦
Shaded Relief—shows detail
relief on the map (if available)
or turns off shading.
automotive perspective with
next-turn information to use
while driving.
•
Map Information—allows you to
enable or disable the maps currently
loaded on the device. To purchase
•
Auto Zoom—automatically selects
the appropriate zoom level for
optimal use on your map. When
off is selected, you must zoom in
or out manually.
Tracks Settings
Select Setup > tracks.
•
•
Advanced Map Setup—sets the
zoom levels, the text size, and the
detail level of the map.
•
track Log—turns track recording
on or off.
•
Record Method:
◦
◦
◦
Zoom Levels—selects the zoom
level for map items.
◦
Distance—allows you to record
by entering a specific distance
interval.
text Size—selects the text size
for map items.
◦
◦
time—allows you to record by
entering a specific time.
Detail—selects the amount
of detail shown on the map.
Showing more detail may cause
the map to redraw more slowly.
Auto—allows you to record the
tracks at a variable rate to create
an optimum representation of
your tracks.
30
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
•
•
•
Interval—selects a track log
recording rate. Recording points
more frequently creates a more-
detailed track, but fills the track log
faster.
Time Settings
Select Setup > time.
•
time Format—allows you to
select a 12-hour or a 24-hour
display time.
Auto Archive—selects an
automatic archive method to
organize your tracks. Tracks are
saved and cleared automatically
based on the user setting.
•
time Zone—allows you to select
the time zone for the device. You
can select Automatic to set the
time zone automatically based on
your GPS position.
Color—changes the color of the
track line on the map.
Changing the Units of
Measure
You can customize units of measure for
distance and speed, elevation, depth,
temperature, and pressure.
1. Select Setup > Units.
2. Select a measurement type.
3. Select a unit of measure for the
setting.
Rino 600 Series Owner’s Manual
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
Position Format Settings
Heading Settings
You can customize the compass
settings.
note: Do not change the position
format or the map datum coordinate
system unless you are using a map or
chart that specifies a different position
format.
Select Setup > Heading.
•
•
•
Display—sets the type of
directional heading on the compass.
Select Setup > Position Format.
north Reference—sets the north
reference of the compass.
•
•
•
Position Format—sets the position
format in which a given location
reading appears.
Go to Line/Pointer—allows you
to select how the course appears.
Map Datum—sets the coordinate
system on which the map is
structured.
◦
◦
Bearing (Small or Large)—the
direction to your destination.
Course (CDI)—your
relationship to a course line
leading to a destination.
Map Spheroid—shows the
coordinate system the device is
using. The default coordinate
system is WGS 84.
•
Compass—switches from an
electronic compass to a GPS
compass when you are traveling
at a higher rate of speed for a set
period of time (Auto), or turns the
compass off.
32
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
•
Plot type
altimeter Settings
◦
◦
◦
◦
elevation/time—records
elevation changes over a period
of time.
Select Setup > Altimeter.
•
Auto Calibration—allows the
altimeter to self-calibrate each time
you turn the device on.
elevation/Distance—records
elevation changes over a
distance.
•
Barometer Mode
◦
Variable elevation—the
barometer functions while you
are moving.
Barometric Pressure—records
barometric pressure over a
period of time.
◦
Fixed elevation—the
barometer functions while you
are stationary.
Ambient Pressure—records
ambient pressure changes over a
period of time.
•
Pressure trending
•
◦
Save When Power on—
records pressure data only when
the device is turned on. This
can be useful when you are
watching for pressure fronts.
◦
Save Always—records pressure
data every 15 minutes, even
when the device is turned off.
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Customizing Your Device
•
•
chirp™ Searching—turns on or off
chirp searching. A chirp is a small
accessory that you can program and
leave in a geocache.
Program chirp™—programs the
chirp accessory. See the chirp
.com.
Calibrating the Barometric
altimeter
You can manually calibrate the
barometric altimeter if you know
the correct elevation or the correct
pressure.
1. Select Setup > Altimeter.
2. Select Altimeter Calibration.
3. Follow the on-screen instructions.
Routing Settings
Select Setup > Routing.
Geocache Settings
Select Setup > Geocaches.
•
Guidance Method—sets the
calculation and guidance method
for your routes.
•
Geocache List—allows you to
display the geocache list by names
or codes.
◦
off Road—calculates point-to-
point routes.
•
Found Geocaches—allows you
to edit the number of geocaches
found. This number automatically
increases as you log a find.
◦
on Road For time—calculates
on-road routes that require
minimal time to drive.
◦
on Road For Distance—
calculates on-road routes that
are shorter in distance.
•
Filter—filters a geocache list for
certain factors, such as level of
difficulty.
34
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your Device
◦
Prompted—allows you to
select a route calculation mode
before navigating.
Marine Map Settings
Select Setup > Marine.
•
Marine Chart Mode:
•
•
Calculates Routes for—optimizes
the routes for the selected
transportation method.
◦
nautical—displays various map
features in different colors so
that the marine POIs are more
readable. The nautical chart
reflects the drawing scheme of
paper charts.
Lock on Road—locks the
position icon, which represents
your position on the map, onto the
nearest road.
◦
Fishing—(requires marine
maps) displays a detailed view
of bottom contours and depth
soundings. Simplifies map
presentation for optimal use
while fishing.
•
off Road transitions
◦
◦
◦
Auto—automatically routes you
to the next point.
Manual—allows you to select
the next point on the route.
Distance—routes you to the
next point on the route when
you are within a specified
distance of your current point.
•
•
Appearance—allows you to set the
appearance of marine navigation
aids on the map.
Marine Alarm Setup
•
Avoidance Setup—allows you to
select the road type you want to
avoid.
◦
Anchor Drag Alarm—alarm
sounds when you exceed a
specified drift distance while
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
35
Customizing Your Device
anchored.
Resetting Data
You can reset trip data, delete all
waypoints, clear the current track, or
restore default values.
◦
◦
off Course Alarm—alarm
sounds when you are off course
by a specified distance.
Deep Water/Shallow Water—
alarm sounds when you enter
water of a specific depth.
1. Select Setup > Reset.
2. Select an item to reset.
Restoring Default Settings
You can reset all the setup values to the
original settings.
Setting up Marine alarms
1. Select Setup > Marine > Marine
Alarm Setup.
Select Setup > Reset > Reset
Defaults to Factory Settings >
Yes.
2. Select an alarm type.
3. Select on.
4. Enter a distance.
5. Select
.
Fitness
For more information on optional
36
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Tools
1. Select an option:
Tools
•
To view device activity for
specific days, select Calendar.
Trip Computer
•
To view the sunrise, sunset,
moonrise, and moonset
information, select Sun and
Moon.
The trip computer displays your current
speed, average speed, maximum
speed, trip odometer, and other helpful
statistics.
•
To view the predicted best times
for hunting and fishing, select,
Hunt and Fish.
To customize the trip computer, see
2. If necessary, use the arrows to view
a different month.
Elevation Plot
By default, the elevation plot displays
the elevation for an elapsed time. To
customize the elevation plot, see
3. Select a day.
Calculating the Size of an
area
1. Select Area Calculation > Start.
Viewing the Calendar and
almanacs
You can view device activity for each
day, as well as almanac information
for the sun and moon information and
hunting and fishing.
2. Walk around the perimeter of the
area you want to calculate.
3. Select Calculate when finished.
Rino 600 Series Owner’s Manual
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Tools
Setting an alarm
If you are not currently using the
device, you can set the device to turn
on at a specific time.
1. Select Alarm Clock.
2. Select + and - to set the time.
3. Select turn Alarm on.
4. Select an option.
The alarm sounds at the selected time.
If the device is off at the alarm time,
the device turns on and sounds the
alarm.
Opening the Stopwatch
Select Stopwatch.
38
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Information
Specifications
Device Information
Water
resistance
Fully gasketed, high
impact plastic alloy,
water resistant to IEC
60529 IPX7
Updating the Software
Before you can update the software,
you must connect the device to your
Battery type
Lithium-ion battery
pack (010-11599-00)
or Alkaline battery
pack (010-11600-00),
which uses four AA
batteries (alkaline,
NiMH, or lithium)
2. Follow the on-screen instructions.
note: Updating the software does not
erase any of your data or settings.
Battery life
Up to 18 hours,
typical usage using
AA batteries
Up to 14 hours,
typical usage using
the lithium-ion battery
pack
Viewing Device
Information
You can view the unit ID, software
version, and license agreement.
Battery
From 32°F to 113°F
(from 0 to 45°C)
Select Setup > About.
charging
temperature
range
Rino 600 Series Owner’s Manual
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Information
notice
Contact your local waste disposal
department to properly recycle the
batteries.
Operating
temperature
range
From -4°F to 140°F
(from -20°C to 60°C)
about the Batteries
Maximizing Battery Life
You can do various things to increase
the battery life.
WaRNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information.
•
•
•
•
•
Exit the camera application when
you are not taking photos.
Turn the backlight off when not
needed.
The temperature rating for the device
may exceed the usable range of some
batteries. Alkaline batteries can rupture
at high temperatures. Alkaline batteries
lose a significant amount of their
capacity as temperature decreases. Use
lithium batteries when operating the
device in below-freezing conditions.
Lower the backlight brightness
Decrease the backlight timeout
Enable battery save mode
Do not use a sharp object to remove
batteries.
Selecting the Battery Type
1. Select Setup > System > Battery
type.
40
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Information
2. Select Alkaline, Lithium, or
Rechargeable niMH.
Cleaning the Screen
1. Dampen a soft, clean, lint-free cloth
with water, isopropyl alcohol, or
eyeglass lens cleaner.
Long-Term Storage
When you do not plan to use the
device for several months, remove the
batteries. Stored data is not lost when
batteries are removed.
2. Wipe the screen with the cloth.
3. Thoroughly dry the screen.
Water Immersion
notice
Caring for the Device
The device is waterproof to IEC
Standard 60529 IPX7. It can withstand
immersion in 1 meter of water for 30
minutes. Prolonged submersion can
cause damage to the device. After
submersion, be certain to wipe dry
and air dry the device before using or
charging.
notice
Avoid chemical cleaners and solvents
that can damage plastic components.
Never use a hard or sharp object to
operate the touchscreen, or damage
may result.
Cleaning the Device
1. Dampen a clean cloth with a mild
detergent solution.
2. Wipe the device with the damp
cloth.
3. Thoroughly dry the device.
Rino 600 Series Owner’s Manual
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Information
Extreme Temperatures
Installing a microSD Card
note: The microSD card option is
available only with the Rino 650 and
655t.
notice
Do not store the device where
prolonged exposure to extreme
temperatures can occur, because it can
cause permanent damage.
Memory cards can be used for
additional storage. Also, some maps
are available preloaded on memory
more information.
Data Management
note: The device is not compatible
with Windows® 95, 98, Me, or NT. It is
also not compatible with Mac® OS 10.3
and earlier.
1. Turn the D-ring counter-clockwise,
and remove the battery pack.
2. Slide the card holder
➊
toward
the top edge of the device, and
lift up, as instructed in the battery
compartment.
File Types
The device supports these file types.
•
Files from BaseCamp™ or
HomePort™
➊
Go to www.garmin.com
•
GPI custom POI files from the
Garmin POI Loader
➋
•
•
JPEG photo files
GPX geocache files
42
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Information
3. Plug the small end of the USB
3. Place the microSD card
➋
in the
cable into the mini-USB port.
device with the contacts facing
down.
Your device and memory card
(optional) appear as removable
drives in My Computer on Windows
computers and as mounted volumes on
Mac computers.
4. Close the card holder.
5. Slide the card holder toward the
bottom of the device to lock it.
6. Replace the battery pack, and turn
the D-ring clockwise.
Transferring Files to Your
Computer
Before you can transfer files, you must
connect the device to your computer
Connecting the Device to a
Computer
1. Connect the USB cable to a USB
port on your computer.
1. Browse your computer for the file.
2. Select the file.
2. Pull up the weather cap from the
mini-USB port
➊.
3. Select edit > Copy.
4. Open the “Garmin” or memory card
drive/volume.
➊
tIP: You must put photo files in the
Garmin\JPEG folder. You must put
geocache files in the Garmin\GPX
folder.
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
43
Device Information
5. Select edit > Paste.
Deleting Files
4. Press the Delete key on your
keyboard.
Disconnecting the USB Cable
1. Complete an action:
notice
If you do not know the purpose of
a file, do not delete it. Your device
memory contains important system
files that should not be deleted. Be
especially cautious of folders entitled
“Garmin.”
•
For Windows computers, click
the eject icon
tray.
in your system
•
For Mac computers, drag the
volume icon to the Trash
.
2. Disconnect the device from your
computer.
notice
Your device memory contains
important system files and folders that
should not be deleted.
Before you can delete files, you must
connect the device to your computer
1. Open the “Garmin” drive or
volume.
2. If necessary, open a folder or
volume.
3. Select the files.
44
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Before you can use the fitness
appendix
accessory with your device, you
must install the accessory according
to the instructions included with the
accessory.
additional Maps
You can use additional maps in the
device, such as BirdsEye satellite
imagery, BlueChart® g2, and City
Navigator® detailed maps. Detailed
maps may contain additional points of
interest, such as restaurants or marine
services. For more information, go to
http://buy.garmin.com or contact your
Garmin dealer.
You can use optional fitness accessories
including a heart rate monitor or a
cadence sensor with your device.
These accessories use ANT+ wireless
technology to send data to the device.
Using Optional Fitness
accessories
1. Bring the device within range (3 m)
of the ANT+ accessory.
Optional accessories
Optional accessories, such as mounts,
preloaded map memory cards, fitness
accessories, and replacement parts, are
from your Garmin dealer.
2. Select Setup > Fitness.
3. Select Heart Rate Monitor or
Bike Cadence Sensor.
4. Select Search for new.
5. Customize your data fields to view
the heart rate or cadence data
Optional Fitness accessories
note: The fitness option is available
with only the Rino 650 and 655t.
Rino 600 Series Owner’s Manual
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Tips for Pairing aNT+ accessories
with Your Garmin Device
•
When paired, your Garmin device
only receives data from your
accessory, and you can go near
other accessories.
•
Verify that the ANT+ accessory
is compatible with your Garmin
device.
Data Field Options
•
Before you pair the ANT+
accessory with your Garmin device,
move 10 m away from other ANT+
accessories.
Data Field
Description
Accuracy of
GPS
The margin of
error for your exact
locationꢀ For example,
your GPS location is
accurate to within +/-
12 feet (3ꢀ6 m)ꢀ
•
•
Bring the Garmin device within
range (3 m) of the ANT+ accessory.
After you pair the first time, your
Garmin device automatically
recognizes the ANT+ accessory
each time it is activated. This
process occurs automatically when
you turn on the Garmin device and
only takes a few seconds when
the accessories are activated and
functioning correctly.
Ambient
Pressure
The uncalibrated
environmental
pressureꢀ
Ascent -
Average
The average vertical
distance of ascentꢀ
Ascent -
Maximum
The maximum ascent
rate in feet/meters per
minuteꢀ
Ascent - Total The total elevation
distance ascendedꢀ
46
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Data Field
Description
Data Field
Description
Barometer
The calibrated current
pressureꢀ
Descent -
Maximum
The maximum
descent rate in feet or
meters per minuteꢀ
Battery Level The remaining battery
powerꢀ
Descent - Total The total elevation
distance descendedꢀ
Bearing
The direction from
your current location
to a destinationꢀ
Distance to
Destination
The distance to your
final destinationꢀ
Cadence
(cadence
accessory
required)
Revolutions of the
crank arm or strides
per minuteꢀ
Distance to
Next
The remaining
distance to the next
waypoint on the routeꢀ
Elevation
The altitude of your
current location above
or below sea levelꢀ
Course
The direction from
your starting location
to a destinationꢀ
Elevation -
Maximum
The highest elevation
reachedꢀ
Depth
The depth of the
waterꢀ Requires a
connection to a NMEA
0183 depth-capable
device to acquire data
Elevation -
Minimum
The lowest elevation
reachedꢀ
ETA at
Destination
The estimated time
of day you will reach
your final destinationꢀ
Descent -
Average
The average vertical
distance of descentꢀ
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
47
Appendix
Data Field
Description
Data Field
Description
ETA at Next
The estimated time of
day you will reach the
next waypoint on the
routeꢀ
Location (lat/ Displays the current
lon)
position in the default
position format
regardless of the
selected settingsꢀ
Glide Ratio
The ratio of horizontal
distance traveled to
the change in vertical
distanceꢀ
Location
(selected)
Displays the current
position in the
selected position
formatꢀ
Glide Ratio to The glide ratio
Destꢀ
required to descend
Odometer
Off Course
A running tally of
distance traveled for
all tripsꢀ
from your current
position and elevation
to the destination
elevationꢀ
The distance to
the left or the right
by which you have
strayed from the
GPS Signal
Strength
The strength of the
GPS signalꢀ
original path of travelꢀ
Heading
The direction you are
movingꢀ
Pointer
The data field arrow
points in the direction
of the next waypoint
or turnꢀ
Heart Rate
(heart rate
monitor
Your heart rate in
beats per minute
(bpm)ꢀ
required)
48
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Data Field
Description
Data Field
Description
Speed
The current rate of
speed at which you
are moving since last
resetꢀ
Temperature - The temperature of
Water
the waterꢀ Requires a
connection to a NMEA
0183 temperature-
capable device to
acquire data
Speed -
Maximum
The maximum speed
reached since last
resetꢀ
Time of Day
The current time of
day based on your
time settings (format,
time zone, and
Speed -
Moving Avgꢀ
The average speed
of the device while
moving since last
resetꢀ
daylight saving time)ꢀ
Speed -
Overall Avgꢀ
Your average speed
since last resetꢀ
Time to
Destination
The estimated time
needed to reach your
final destinationꢀ
Sunrise
The time of sunrise
based on your GPS
positionꢀ
Time to Next
To Course
The estimated time
needed to reach the
next waypoint on the
routeꢀ
Sunset
The time of sunset
based on your GPS
positionꢀ
The direction in which
you must move to
return to the routeꢀ
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
49
Appendix
Data Field
Description
Data Field
Description
Trip Odometer A running tally of the
distance traveled
Vertꢀ Speed to The measurement
Destꢀ
of your rate of
ascent or descent
to a predetermined
altitudeꢀ
since the last resetꢀ
Trip Time -
Moving
A running tally of time
since the last resetꢀ
Vertical Speed Your rate of altitude
gain or loss over timeꢀ
Trip Time -
Stopped
The time spent not
moving since the last
resetꢀ
Waypoint at
Destꢀ
The last point on
a route to your
destinationꢀ
Trip Time -
Total
A running tally of
distance traveled
since the last resetꢀ
Waypoint at
Next
The next point on
your routeꢀ
Turn
The angle of
difference (in
degrees) between
the bearing to your
destination and your
current courseꢀ L
means turn leftꢀ R
means turn rightꢀ
Velocity Made The speed at which
Good
you are closing on a
destination along a
routeꢀ
50
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Solution
My device will not use Channels 1-7 and 15-22 are GMRS channelsꢀ These
channels above 15ꢀ
channels are not available on the device unless the
The screen does not
respondꢀ How do I
reset the device?
1ꢀ Remove the batteriesꢀ
2ꢀ Reinstall the batteriesꢀ
NOTE: This does not erase any of your data or settingsꢀ
I want to reset all the Select Setup > Reset > Restore Defaults to Factory
customized settings
back to the factory
defaultsꢀ
Settingsꢀ
My device does not
acquire satellite
signalsꢀ
1ꢀ Take your device out of parking garages and away
from tall buildings and treesꢀ
2ꢀ Turn on the deviceꢀ
3ꢀ Remain stationary for several minutesꢀ
My device will not
chargeꢀ
•
•
•
Ensure the lithium-ion battery is properly installed
Ensure the temperature is between 32°F and 113°F
(from 0 to 45°C)ꢀ
My battery gauge does 1ꢀ Leave the device on until the battery runs outꢀ
not seem accurateꢀ
2ꢀ Fully charge the battery without interrupting the
charge cycleꢀ
Rino 600 Series Owner’s Manual
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Problem
Solution
The batteries do not
last longꢀ
How do I know my
On the device, an image of the device connected to a
device is in USB mass computer appearsꢀ
storage mode?
On your computer, you should see a new removable
disk drive in My Computer on Windows computers and a
mounted volume on Mac computersꢀ
My device is
You may have loaded a corrupted fileꢀ
1ꢀ Disconnect the device from your computerꢀ
2ꢀ Turn off the deviceꢀ
3ꢀ Hold while you connect the device to your
computerꢀ
connected to the
computer, but it will not
go into mass storage
modeꢀ
4ꢀ Continue holding for 30 seconds or until the device
goes into mass storage modeꢀ
I cannot see any new If you have several network drives mapped on your
removable drives in
my list of drivesꢀ
computer, Windows may have trouble assigning drive
letters to your Garmin drivesꢀ See the help file for your
operating system to learn how to assign drive lettersꢀ
I need replacement
parts or accessoriesꢀ dealerꢀ
52
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
File Form 605 online at: http://wireless
.fcc.gov/uls/. A filing fee is associated
with this application.
FCC Licensing
Information
The Rino two-way radio operates on
General Mobile Radio Service(GMRS)
frequencies regulated by the Federal
Communications Commission (FCC)
in the United States. Operation on the
GMRS frequencies is subject to rules
as specified in 47 CFR Part 95.
For information on fees, see the FCC
fee information web page at:
For questions concerning the license
application, contact the FCC at
In order to transmit on GMRS
frequencies, you are required to obtain
a license from the FCC. An individual
18 years of age or older, who is not a
representative of a foreign government,
is eligible to apply for a GMRS license.
To apply for a GMRS license, you
need FCC Form 605 (605 Main Form
and Schedule F) and FCC Form 159.
Download the application forms from
the FCC web site at: http://www.fcc
them through the FCC forms hotline at
1-800-418-FORM (1-800-418-3676).
1-888-Call-FCC (1-888-225-5322).
No license is required to operate on
GMRS channels in Canada.
However, GMRS repeater channels are
not approved for use by the Canadian
government.
For use in countries outside of the U.S.
and Canada, please check with that
government for any restrictions of FRS
or GMRS use.
Rino 600 Series Owner’s Manual
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
navigating 19
settings 32
connecting
B
Index
backlight 6, 7
BaseCamp 42
batteries 28, 39, 47
about 40
a
wirelessly 16
accessories 45, 52
fitness 45
acquiring satellite signals
alarms
charging 5
information 4
installing 4
storage 40
contacts 10
accepting 10
editing 10
navigating 21
creating
routes 21
waypoints 15
customizing
warnings 40
beeps 29
clock 38
marine 36
C
call 3
camera 24
channels 8
choosing 8
monitoring 8
scanning 8
compass
altimeter
profiles 26
calibrating 34
settings 33
D
dashboard 27
customizing 27
options 46
calibrating 19
54
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
deleting
files 44
map datum coordinate
system 32
G
General Mobile Radio
geocaches 21, 34
downloading 21
navigating 21
profiles 27
routes 22
tracks 17
waypoints 15
N
display
settings 33
navigating
routes 23
backlight 6
settings 29
search 18
tracks 17
H
headset 9
HomePort 42
downloading
software 39
E
notes 10
L
editing
profiles 26
routes 22
waypoints 15
language 28
M
map 19
O
F
datum 32
detail 30
information 30
Family Radio Service
(FRS) 8
Rino 600 Series Owner’s Manual
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
reset
software
P
Peer-to-Peer
data 36
updating 39
enabling 11
defaults 36
waypoints 36
version 39
positioning 11
photos 24
specifications 39
stopwatch 38
routes 21–23
taking 24
uploading and
avoidance 35
creating 21
deleting 22
editing 22
navigating 23
settings 34
downloading 25
viewing 24
power 4
profiles
creating 26
push-to-talk 4
T
time
alarms 38
settings 31
stopwatch 38
zone 31
S
R
radio
channels 8
icons 13
tones 29
saving
TracBack 18
tracks
scanning 8
tracks 17
scanlist
deleting 17
navigating 17
recording 16, 30
56
Rino 600 Series Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest free software updates (excluding map data) throughout the life of
© 2011 Garmin Ltdꢀ or its subsidiaries
Garmin International, Incꢀ
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltdꢀ
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
Noꢀ 68, Zhangshu 2nd Road, Xizhi Distꢀ, New Taipei City, 221, Taiwan (RꢀOꢀCꢀ)
July 2011
190-01183-00_0B
Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|