GE Telephone 29322 User Manual

29322  
HANDSET  
DIALING A NUMBER FROM MEMORY  
Speakerphone  
INTRODUCTION  
INSTALLING THE PHONE  
LIMITED WARRANTY  
1. When the phone rings, pick up the handset.  
2. When finished, hang up the handset.  
You can dial numbers from memory when using the  
handset or speakerphone. When you get a dial tone,  
press the A, B, or C to dial the priority number, press the  
dial button followed by the memory location (0-9) to dial  
the frequently called number you want to dial.  
CAUTION: When using telephone equipment,  
What your warranty covers:  
with 12-Number Memory  
User’s Guide  
there are basic safety instructions that should  
always be followed. Refer to the IMPORTANT  
SAFETY INSTRUCTIONS provided with this  
product and save them for future reference.  
Defects in materials or workmanship.  
For how long after your purchase:  
SPEAKERPHONE  
One year, from date of purchase.  
1. When the phone rings, press the SPEAKER button to  
answer a call.  
(The warranty period for rental units begins with the  
first rental or 45 days from date of shipment to the  
rental firm, whichever comes first.)  
CHAIN DIALING FROM MEMORY  
Congratulations on purchasing this GE Speakerphone.This  
speakerphone has been designed to be simple to use,  
however, you can reach its full potential more quickly by  
taking a few minutes to read this instruction book.  
2. When finished, press the SPEAKER button to hang up.  
Use this feature to make calls which require a sequence  
of numbers, for instance if you use a calling card for a  
frequently called long distance number. By dialing each  
part of the sequence from memory.The following  
example shows how you can use chain dialing to make a  
call through a long distance service:  
You may switch between the speakerphone and the  
handset during the dialing process or anytime during a  
conversation.  
Speakerphone to Handset - Pick up the handset to  
disable the speakerphone.The speakerphone indicator  
turns off.  
Handset to Speakerphone - Press the SPEAKER button,  
and then hang up the handset.The speakerphone  
indicator turns on and the handset is disabled.  
What we will do:  
Provide you with a new or, at our option, a refurbished  
unit.The exchange unit is under warranty for the  
remainder of the original products warranty period.  
CAUTION:  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CONNECTING THE TELEPHONE LINE  
How you get service:  
THE EXCLAMATION  
POINT WITHIN THE  
TRIANGLE IS A  
THE LIGHTNING  
CAUTION: TO REDUCE THE  
FLASH AND ARROW RISK OF ELECTRIC SHOCK, DO  
HEAD WITHIN THE NOT REMOVE COVER (OR  
TRIANGLE IS A  
Choose the best location to install your speakerphone.Your  
speakerphone should be placed on a level surface such as a  
desk or table top, or you may mount it on a wall.  
WARNING:TO  
The Number For  
Memory Location  
Properly pack your unit. Include any cables, etc., which were  
originally provided with the product.We recommend using  
the original carton and packing materials.  
WARNING SIGN  
ALERTING YOU OF  
IMPORTANT  
BACK). NO USER  
PREVENT FIRE OR  
ELECTRICAL SHOCK  
HAZARD, DO NOT  
EXPOSETHIS  
WARNING SIGN  
ALERTING YOU OF  
“DANGEROUS  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO  
QUALIFIED SERVICE  
PERSONNEL.  
Long distance access number  
Authorization code  
Frequently called long distance number  
7
8
9
INSTRUCTIONS  
ACCOMPANYING  
THE PRODUCT.  
VOLTAGE” INSIDE  
THE PRODUCT.  
NOTE: The unit is shipped from the factory for  
placement on a level surface.  
”Proof of purchase in the form of a bill of sale or  
receipted invoice which is evidence that the product is  
within the warranty period, must be presented to  
obtain warranty service.” For rental firms, proof of first  
rental is also required. Also print your name and  
address and a description of the defect. Send via  
standard UPS or its equivalent to:  
PRODUCT TO RAIN  
OR MOISTURE.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
VOLUME  
1. Press SPEAKER (or pick up the handset).  
2. Press the dial button and then press 7.  
3. When you hear the access tone, press dial and then  
press 8.  
1. Plug one end of the coiled cord into the handset jack and  
the other end into the jack on the left side of the base.  
2. Plug one end of the straight telephone line cord into  
the back of the base and the other end into a modular  
telephone jack.  
3. Adjust the ringer volume switch to the desired  
listening level.  
The unit is properly installed if you pick up the handset  
and hear the dial tone. If you don’t hear a dial tone  
recheck all the installation steps.  
You can control the volume of both the handset receiver  
and the speakerphone.  
SPEAKERPHONE LAYOUT  
While using the handset or speakerphone, adjust the  
receiver or speaker volume control, located on the base,  
to the desired listening level.  
memory store buttons  
memo log  
ringer volume  
4. At the next access tone, press dial and then 9.  
ATLINKS USA, Inc.  
c/oThomson  
11721 B Alameda Ave.  
Socorro,Texas 79927  
FLASH  
TROUBLESHOOTING GUIDE  
switch  
Press the FLASH/EXIT button to activate customer calling  
services such as call waiting or call transfer, which are  
provided by your local phone company.  
No dial tone. Won't dial out  
store button  
Pay any charges billed to you by the Exchange Center  
for service not covered by the warranty.  
Insure your shipment for loss or damage. ATLINKS  
accepts no liability in case of damage or loss.  
A new or refurbished unit will be shipped to you  
freight prepaid.  
dial button  
Check the hook switch. Make sure it fully extends  
when the handset is lifted from the cradle.  
Make sure speakerphone indicator comes on (if  
using speakerphone.)  
Unplug the phone, wait 30 seconds, and plug the phone  
back in.Then lift the handset to check the dial tone.  
store  
A
B
C
dial  
handset volume  
switch  
REDIAL  
INSTALLING THE WALL  
We bring good things to life.  
You may redial the last number you called by pressing  
the REDIAL/PAUSE button after you get a dial tone.  
MOUNTING BRACKET  
speaker volume  
switch  
PAUSE  
REDIAL  
EXIT  
MUTE button  
MUTE  
FLASH  
SPEAKER  
If your speakerphone is to be mounted on a wall:  
What your warranty does not cover:  
EQUIPMENT APPROVAL INFORMATION  
Phone doesn’t ring  
NOTE: The Redial feature holds in memory the last  
phone number you dialed (as many as 32 digits). If you  
pressed any numbers after dialing the phone number,  
(for example, when accessing a voice-menu system)  
those numbers also are redialed.  
1. Stuff the extra  
telephone line  
cord into the  
Customer instruction. (Your Owners Manual provides  
information regarding operating instructions and user  
controls. Any additional information, should be  
obtained from your dealer.)  
Your telephone equipment is approved for connection to the Public Switched  
Telephone Network and is in compliance with parts 15 and 68, FCC Rules and  
Regulations and theTechnical Requirements forTelephoneTerminal Equipment  
published by ACTA.  
FLASH/ EXIT button  
Make sure ringer switch is set to LO or HI.  
You may have too many extension phones on your  
line. Unplug some extension phones.  
REDIAL/ PAUSE button  
SPEAKER button  
pocket on the  
bottom of the  
base and feed the  
line cord through  
the grooves on  
the top of the  
base back.  
1
Notification to the LocalTelephone Company  
On the bottom of this equipment is a label indicating, among other  
information, the US number and Ringer Equivalence Number (REN) for the  
equipment.You must, upon request, provide this information to your  
telephone company.  
Check for a dial tone. If there is no dial tone, see  
solutions for "No dial tone."  
Installation and setup service adjustments.  
Batteries.  
Damage from misuse or neglect.  
Products which have been modified or incorporated  
into other products.  
BEFORE YOU BEGIN  
MUTE  
Low handset or speaker volume  
Check the receiver or speaker volume settings.  
Can’t be heard by other party  
The REN is useful in determining the number of devices you may connect to  
your telephone line and still have all of these devices ring when your  
telephone number is called. In most (but not all) areas, the sum of the RENs of  
all devices connected to one line should not exceed 5.To be certain of the  
number of devices you may connect to your line as determined by the REN,  
you should contact your local telephone company.  
PARTS CHECKLIST  
You can use the MUTE button to interrupt a phone  
conversation to talk privately with someone else in the  
room. A conversation can be muted with speakerphone  
or handset use.  
Your package should contain the following items:  
A
2. Install the wall  
Make sure phone cord is securely plugged in.  
Products purchased or serviced outside the USA.  
Acts of nature, such as but not limited to  
lightning damage.  
mount bracket on  
the bottom half of  
the phone  
B
Make sure extension phones are on the hook at the  
same time you're using the phone. It is normal for the  
volume to drop when additional extension phones are  
used at the same time.  
A plug and jack used to connect this equipment to the premises wiring and  
telephone network must comply with the applicable FCC Part 68 rules and  
requirements adopted by the ACTA. A compliant telephone cord and modular  
plug is provided with this product. It is designed to be connected to a compatible  
modular jack that is also compliant. See installation instructions for details.  
store  
A
B
C
dial  
1. Press MUTE to activate the mute feature.The mute  
indicator turns on.  
2. Press MUTE again to deactivate.  
NOTE: Switching from speakerphone to handset  
cancels mute.  
according to steps  
2 & 3 above.  
3. Plug one end of  
the straight  
Product Registration:  
PAUSE  
REDIAL  
EXIT  
MUTE  
FLASH  
SPEAKER  
Notes  
Please complete and mail the Product Registration  
Card packed with your unit. It will make it easier to  
contact you should it ever be necessary.The return of  
the card is not required for warranty coverage.  
C
Memory dialing  
This equipment may not be used on coin service provided by the  
Line cord  
Handset cord  
Handset  
Base unit  
Wall mount  
bracket  
D
telephone company.  
Make sure you entered numbers correctly. (See "Memory.")  
Party lines are subject to state tariffs, and therefore, you may not be able to  
use your own telephone equipment if you are on a party line. Check with  
your local telephone company.  
telephone line cord into the back of the base and the  
other end into a modular telephone jack.  
4. Slip the mounting holes over the wall plate posts and  
slide the unit down firmly into place.  
Make sure the telephone is properly installed. Pick  
up the handset and listen for the dial tone. If you  
don't hear the dial tone, recheck or repeat the  
installation steps.  
TELEPHONE JACK REQUIREMENTS  
MEMORY  
Limitation of Warranty:  
Notice must be given to the telephone company upon permanent  
disconnection of your telephone from your line.  
To use this phone, you need an  
THE WARRANTY STATED ABOVE ISTHE ONLY  
WARRANTY APPLICABLETOTHIS PRODUCT. ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED  
(INCLUDING ALL IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR  
WRITTEN INFORMATION GIVEN BY ATLINKS USA,  
INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A  
GUARANTY OR IN ANY WAY INCREASETHE SCOPE  
OFTHIS WARRANTY.  
Wall plate  
Store as many as 13 memories (three priority, ten two  
touch) for programming your most frequently dialed  
telephone numbers.You can store up to 16 digits in each  
priority key (A, B, C), or in each of the numeric keys 0  
through 9. Numbers must be stored with the handset  
lifted or the SPEAKER button depressed.  
RJ11C type modular telephone jack,  
which might look like the one  
If your home has specially wired alarm equipment connected to the  
telephone line, ensure the installation of this product does not disable your  
alarm equipment. If you have questions about what will disable alarm  
equipment, consult your telephone company or a qualified installer.  
TELEPHONE OPERATION  
GENERAL PRODUCT CARE  
Modular  
telephone  
line jack  
pictured here, installed in your  
home. If you don’t have a modular  
jack, call your local phone company  
to find out how to get one installed.  
To keep your telephone working and looking good,  
follow these guidelines:  
2
Rights of theTelephone Company  
SPEAKERPHONE  
Should your equipment cause trouble on your line which may harm the telephone  
network, the telephone company shall, where practicable, notify you that  
temporary discontinuance of service may be required. Where prior notice is not  
practicable and the circumstances warrant such action, the telephone company  
may temporarily discontinue service immediately. In case of such temporary  
discontinuance, the telephone company must: (1) promptly notify you of such  
temporary discontinuance; (2) afford you the opportunity to correct the situation;  
and (3) inform you of your right to bring a complaint to the Commission pursuant  
to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.  
The telephone company may make changes in its communications facilities,  
equipment, operations or procedures where such action is required in the  
operation of its business and not inconsistent with FCC Rules and Regulations. If  
these changes are expected to affect the use or performance of your telephone  
equipment, the telephone company must give you adequate notice, in writing, to  
allow you to maintain uninterrupted service.  
For hands-free operation and convenience, this unit is  
equipped with a speakerphone.  
Avoid putting it near heating appliances and devices  
that generate electrical noise (for example, motors or  
fluorescent lamps).  
IMPORTANT: All numbers stored in memory will be  
erased if the phone line is disconnected from the wall  
telephone phone jack for more than five minutes. Write  
down any stored numbers you do not want to loose.  
IMPORTANT INSTALLATION  
INFORMATION  
For best speakerphone performance, avoid the following:  
Areas with high background noise. (The microphone  
might pick up these sounds and prevent the  
speakerphone from going into the receiving mode  
when you finish talking.)  
DO NOT expose to direct sunlight or moisture.  
Avoid dropping and other rough treatment to  
the telephone.  
REPAIR OR REPLACEMENT AS PROVIDED UNDERTHIS  
WARRANTY ISTHE EXCLUSIVE REMEDY OFTHE  
CONSUMER. ATLINKS USA, INC. SHALL NOT BE  
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL  
DAMAGES RESULTING FROMTHE USE OFTHIS  
PRODUCT OR ARISING OUT OF ANY BREACH OF ANY  
EXPRESS OR IMPLIED WARRANTY ONTHIS PRODUCT.  
THIS DISCLAIMER OF WARRANTIES AND LIMITED  
WARRANTY ARE GOVERNED BYTHE LAWS OFTHE  
STATE OF INDIANA. EXCEPTTOTHE EXTENT  
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED  
WARRANTY OF MERCHANTABILITY OR FITNESS FOR  
A PARTICULAR PURPOSE ONTHIS PRODUCT IS  
LIMITEDTOTHE APPLICABLE WARRANTY PERIOD SET  
FORTH ABOVE.  
Never install telephone wiring during a  
lightning storm.  
Never install telephone jacks in wet locations unless  
the jack is specifically designed for wet locations.  
Never touch non-insulated telephone wires or  
terminals, unless the telephone line has been  
disconnected at the network interface.  
STORING A NUMBER IN MEMORY  
Clean with a soft cloth.  
Never use a strong cleaning agent or abrasive powder  
because this will damage the finish.  
To program priority keys:  
Surfaces affected by vibration.  
Recessed areas such as in a corner, under a cupboard, or  
next to a cabinet, which can generate an echo effect.  
1. Make sure the telephone is properly installed. Pick up the  
handset and listen for the dial tone. If you don’t hear the  
dial tone, recheck or repeat the installation steps.  
2. Press the SPEAKER button or pick up the handset.  
3. Press the store button.  
4. Dial the number to be stored.  
5. Press the store button again.  
INTERFERENCE INFORMATION  
Retain the original packaging in case you need to ship  
it at a later date.  
Note the following guidelines when using the  
speakerphone:  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1)This device may not cause harmful interference; and  
(2)This device must accept any interference received, including interference that  
may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following measures:  
Use caution when installing or modifying  
telephone lines.  
Temporarily disconnect any equipment connected to  
the phone such as faxes, other phones, or modems.  
Stay reasonably close to the phone so that you can be  
clearly heard by the person to whom you are talking.  
You can adjust the speaker volume by adjusting the  
VOLUME control on the right side of the base.  
The speakerphone indicator comes on when the  
speakerphone is in use.  
SERVICE  
If trouble is experienced with this equipment, for repair  
or warranty information, please contact customer service  
at 1-800-448-0329. If the equipment is causing harm to  
the telephone network, the telephone company may  
request that you disconnect the equipment until the  
problem is resolved.  
6. Press the A, B or C button.  
IMPORTANT INSTALLATION  
GUIDELINES  
7. Press the SPEAKER button or hang up the handset.  
To program frequently called numbers:  
1. Press the SPEAKER button or pick up the handset.  
2. Press the store button.  
3. Dial the number to be stored.  
4. Press the store button again.  
How state law relates to this warranty:  
IMPORTANT: Before using the speakerphone, pick up  
the handset and listen for a dial tone. If you do not hear  
a dial tone, recheck or repeat the installation steps.  
Some states do not allow the exclusion nor limitation  
of incidental or consequential damages, or limitations  
on how long an implied warranty lasts so the above  
limitations or exclusions may not apply to you.  
This product may be serviced only by the manufacturer  
or its authorized service agents. Changes or  
modifications not expressly approved by ATLINKS USA,  
Inc. could void the users authority to operate this  
product. For instructions on how to obtain service, refer  
to the warranty included in this guide or call customer  
service at 1-800-448-0329.  
Install telephone near a telephone (modular) jack.  
Reorient or relocate the receiving antenna (that is, the antenna for radio or  
Avoid sources of noise, such as a window by a busy  
street, and electrical noise, such motors, microwave  
ovens, and fluorescent lighting.  
television that is “receiving” the interference).  
Reorient or relocate and increase the separation between the  
telecommunications equipment and receiving antenna.  
This warranty gives you specific legal rights, and  
you also may have other rights that vary from state  
to state.  
HANDSET  
Connect the telecommunications equipment into an outlet on a circuit different  
from that to which the receiving antenna is connected.  
Avoid heat sources, such as heating air ducts, heating  
appliances, radiators, and direct sunlight.  
Avoid areas of excessive moisture or extremely  
low temperature.  
5. Press one of the 10 memory location buttons 0-9.  
6. Press the SPEAKER button or hang up the handset.  
1. Pick up the handset and listen for a dial tone.  
2. Dial the number you want to call.  
If these measures do not eliminate the interference, please consult your dealer or  
an experienced radio/television technician for additional suggestions. Also, the  
Federal Communications Commission has prepared a helpful booklet, “HowTo  
Identify and Resolve Radio/TV Interference Problems.This booklet is available  
from the U.S. Government Printing Office, Washington, D.C. 20402. Please specify  
stock number 004-000-00345-4 when ordering copies.  
If you purchased your product outside the USA:  
Or refer inquiries to:  
ATLINKS USA, Inc.  
3. When finished, hang up the handset.  
This warranty does not apply. Contact your dealer for  
warranty information.  
ADDING A PAUSE TO THE DIALING  
SEQUENCE  
Manager, Consumer Relations  
P O Box 1976  
Avoid dusty locations.  
Avoid cordless telephones or personal computers.  
SPEAKERPHONE  
HEARING AID COMPATIBILITY (HAC)  
Indianapolis, IN 46206  
1. Press the SPEAKER button on the base and listen for a  
dial tone.  
Use the REDIAL/PAUSE button to insert a delay in the  
dialing sequence when storing a number, for example,  
when you need to dial 9 to get an outside line.  
Attach your sales receipt to the booklet for future  
reference or jot down the date this product was  
purchased or received as a gift.This information will be  
valuable if service should be required during the  
warranty period.  
This telephone system meets FCC standards for Hearing Aid Compatibility.  
2. Dial the number you want to call.  
3. When finished, press the SPEAKER button to hang up.  
US NUMBER IS LOCATED ONTHE CABINET BOTTOM  
REN NUMBER IS LOCATED ONTHE CABINET BOTTOM  
Press REDIAL/PAUSE at the point in the dialing sequence  
in which a pause is required.  
The pause time is four seconds, if an additional four  
seconds is needed, press the REDIAL/PAUSE button again.  
ANSWERING A CALL  
Purchase date _______________________________________  
Name of store _______________________________________  
NOTE: Make sure the ringer switch is set to HI or LO,  
or the phone will not ring.  
ATLINKS USA, Inc.  
101 West 103rd Street  
Indianapolis, IN 46290  
CHANGING A STORED NUMBER  
Change a stored number by replacing it with a  
different number.  
Model 29322A  
© 2004 ATLINKS USA, Inc.  
55912010 (Rev. 2 E/S)  
Trademark(s) ® Registered  
Marca(s) Registrada(s)  
04-15  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Exido Coffeemaker 245 011 012 User Manual
Ford Automobile 2005 Ford GT User Manual
Fujitsu Printer FTP 627 Series User Manual
Furuno Telephone FM 8000 User Manual
Gardena Heat Pump 1500 1 Art 1498 User Manual
Gardena Trimmer RL 10 User Manual
GE Fryer 681131691680 User Manual
Gianni Industries Door P MU GS705N 30 User Manual
GN Netcom Telephone GN 4170 User Manual
Goodman Mfg Heat Pump GPH13M User Manual