GE Cell Phone NX 7002 User Manual

Security

NetworX Series

NX-7002 GSM/GPRS module

Installation manual

imagination at work

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

CONTENTS ............................................................................................................................................................................3

GENERAL INFORMATION .....................................................................................................................................................4

ORDERING INFORMATION ..................................................................................................................................................4

FEATURE DEFINITIONS ........................................................................................................................................................5

PROGRAMMING HE NX-7002 GPRS MODULE ....................................................................................................................7

P ROGRAMMING THE NX-7002 VIA THE LED KEYPAD ...................................................................................................................7

ENTERING THE PROGRAM MOD E ..................................................................................................................................................... 7

SELECTING THE MODULE TO PROGRA M .......................................................................................................................................... 7

PROGRAMMING A LOCATIO N ........................................................................................................................................................... 7

EXITING A LOCATION ........................................................................................................................................................................ 7

EXITING THE PROGRAM MODE ......................................................................................................................................................... 8

P ROGRAMMING THE NX-7002 VIA THE LCD KEYPAD ..................................................................................................................8

P ROGRAMMING DATA ..............................................................................................................................................................8

NUMERICAL DATA ............................................................................................................................................................................ 8

FEATURE SELECTION DATA .............................................................................................................................................................. 9

START UP, ENROLLING AND TESTING THE NX-7002 .......................................................................................................10

I NSERTING THE SIM CARD .....................................................................................................................................................10

E NROLLING THE SIM CARD ON THE GSM NETWORK ..................................................................................................................11

E NROLLING THE SIM CARD ON THE GPRS NETWORK .................................................................................................................11

T ESTING THE RSSI VALUE ......................................................................................................................................................12

T ESTING THE GSM AND GPRS CONNECTION ............................................................................................................................12

PROGRAMMING THE LOCATION S .....................................................................................................................................13

NX-7002 FOR PRIMARY OR BACKUP REPORTIN G ............................................................................................................24

NX-7002 FOR PRIMARY REPORTING .......................................................................................................................................24

NX-7002 FOR BACKUP REPORTING ........................................................................................................................................24

NX-7002 PROGRAMMING WORKSHEETS .........................................................................................................................26

INSTALLATION GUIDELINE S ..............................................................................................................................................32

MOUNTING THE NX-700 2 ..................................................................................................................................................32

NX-7002 LAYOUT AND DESCRIPTION ...............................................................................................................................33

TECHNICAL SPECIFICATIONS ............................................................................................................................................34

T ECHNICAL SPECIFICATIONS NX-700 2 ....................................................................................................................................34

APPENDIX 1: REPORTING FIXED CODES IN CONTACT-ID AND SIA ................................................................................35

APPENDIX 2: OPERATOR ID CODES ..................................................................................................................................37

NX-7002 Installation manual

Page 3

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

GENERAL INFORMATION

The NX-7002 is the GPRS module that can be added to the NetworX range of panels (NX-8-

EUR, NX-6-EUR and NX-4-EUR). The NX-7002 GPRS module features include:

•

Wireless event reporting.

Six programmable report destinations.

Selectable reportable events from eight partitions.

Compatible with PSTN or ISDN reporting.

PSTN/ISDN as backup.

SIA and Contact ID reporting over GPRS, towards Osborne-Hoffman OH2000 TPC/IP

receiver.

•

SIA reporting with optional area modifiers using SMS messages.

The control panel can use GSM in addition to PSTN (reporting all panel protocols using

GSM).

•

Wireless upload/download using a GSM CSD connection.

Upload/download may be initiated remotely or locally.

Optional download sessions during test calls.

The NX-7002 package contains:

•

NX-7002 GSM/GPRS module

1.5m external antenna

2 black PCB guides for mounting

Audio cable

The GSM/GPRS module requires a SIM card (not included). In order to obtain all NX-7002

features, the SIM card needs to support:

•

Voice channel (event reporting over the voice channel)

Data channel (up/downloading)

GPRS (event reporting towards IP receiver over GPRS)

Contact your local network provider for more information.

ORDERING INFORMATION

For detailed ordering information and part numbers, please refer to the EMEA Distribution

price list of the Caddx product range.

NX-7002 Installation manual

Page 4

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURE DEFINITIONS

CID

Contact ID reporting protocol.

CSD

Circuit Switched Data. This is the communication used to upload/download data. It is similar

to a modem but it is wireless and built in to the NX-7002 (see locations 0, 162 segment 10 and

location 168).

GPRS

General Packet Radio Service. A global standard for wireless communications with a

maximum speed of 115 kilobits per second. It supports a range of bandwidths and can

transmit and receive both small bursts and large amounts of data.

GSM

Global System for Mobile Communications. A global standard for wireless communications

with a maximum speed of 9.6 kilobits per second. It supports narrowband Time Division

Multiple Access (TDMA).

Non transparent mode

An intermediate modem is used on the network to transfer data from one modem to another

(see location 0 segment 1).

Operator

The network operator for the SIM card.

Polling

Polling is the process by which the system reports periodically to a receiver to say it is still

alive. It works in conjunction with TCP/IP reporting only. Polling is more frequent than a daily

test call but less frequent than continuous monitoring. If you configure a very short polling

time, polling occurs very frequently and can generate large quantities of data. When setting

the polling time, you should consider the speed of the GPRS network and the cost of data

transmission (see location 0, segment 3 and location 162 segment 6).

PUK code

Personal Unblocking Key. The code to use to unblock the SIM card. The SIM card can block

when an incorrect SIM PIN is entered repeatedly.

Report control

A block of reporting data that contains configurations to format selected events into one or

more messages according to pre-configured settings and send them to specified destinations

(see location 1).

RSSI

Received Signal Strength Indicator. This indicates the field signal strength of the NX-7002 (see

location 172 and location 162 segment 11 and 12).

Secondary reporting

The means of reporting events that the control panel fails to report. When secondary

reporting is enabled, the report control set in the NX-7002 will act as a backup for the control

panel (see location 25 and location 162 segment 3).

NX-7002 Installation manual

Page 5

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

SIM card PUK code

See PUK code

SMS

Short Message Service. SMS is a service for sending short text messages to mobile phones (see

locations 1, 145, 163, 164, 167).

Transparent mode

Data is transferred directly from one modem to another modem (see location 0 segment 1).

NX-7002 Installation manual

Page 6

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING HE NX-7002 GPRS MODULE

Programming the NX-7002 via the LED keypad

ENTERING THE PROGRAM MODE

To enter the program mode, press [*]-[8]. At this time, the five function LED’s (Stay, Chime, Exit,

Bypass and Cancel) will begin to flash. Next, enter the “Go To Program Code” (factory default is

[9]-[7]-[1]-[3]). If the “Go To Program Code” is valid, the “Service” LED will flash and the five

function LED’s will illuminate steady. You are now in the program mode and ready to select

the module to program.

Note: It is impossible to enter program mode if any partition or the system is armed.

SELECTING THE MODULE TO PROGRAM

Since all modules connected to the NetworX are programmed through the keypad, the

module you are programming should be the first entry. To program the NX-7002 module,

enter [7]-[8]-[#]. The [7]-[8] is the module number of the NX-7002 and the [#] is the entry key.

PROGRAMMING A LOCATION

Once the number of the module to be programmed has been entered, the “Armed” LED will

illuminate, indicating it is waiting for a programming location to be entered. Any location can

be accessed by directly entering the desired programming location followed by the pound [#]

key. If the location entered is a valid location, the “Armed” LED will extinguish, the “Ready” LED

will illuminate, and the zone LED’s will show the binary data for the first segment of this

location. While entering new data, the “Ready” LED will begin flashing to indicate a data

change in process. The flashing will continue until the new data is stored by pressing the [*]

key. Upon pressing the [*] key, the keypad will advance to the next segment and display its

data. This procedure is repeated until the last segment is reached. Pressing the [#] key will exit

from this location and the “Armed” LED will illuminate again waiting for a new programming

location to be entered. If the desired location is the next sequential location, press the [Police]

key. If the previous location is desired press the [Fire] key. If the same location is desired press

the [Medic] key. To review the data in a location, repeat the above procedure, pressing the [*]

key without any numeric data entry. Each time the [*] key is pressed, the programming data

of the next segment will be displayed for review.

EXITING A LOCATION

After the last segment of a location is programmed, pressing the [*] key will exit that location,

turn the “Ready” LED off and the “Armed” LED on. As before, you are now ready to enter

another programming location. If an attempt is made to program an invalid entry for a

particular segment, the keypad sounder will emit a triple error beep (beep, beep, beep) and

remain in that segment awaiting a valid entry.

NX-7002 Installation manual

Page 7

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

EXITING THE PROGRAM MODE

When all the desired changes in programming have been made, it is time to exit the program

mode. Pressing the [Exit] key will exit this programming level and then return to the “Select a

Module to Program” level. If no additional modules are to be programmed, pressing the [Exit]

key again will exit the program mode. If there is a module to be programmed, it may be

selected by entering its address followed by the [#] key (see Selecting the module to program

for more information). The procedure for programming these devices is the same as for the

control panel, except the locations will be for the module selected.

Note: Each time you exit programming mode, the modem restarts and reads the PIN

number, network operator and SMSC address number from the NX-7002 configuration.

Programming the NX-7002 via the LCD keypad

All steps required for programming are the same as the aforementioned LED keypad. The LCD

keypad display will prompt you for the data required. While in the programming mode, and

not in a location, the number in parenthesis is the location you were previously changing.

For example, if the display reads “Enter location, then # (5)”, it is reminding you that location 5

was the last location you programmed. Refer also to “Programming Data” which follows.

Programming data

Programming data is always one of two types. One type of data is numerical, which can have

values from 0-15 or 0-255 depending on the segment size. The other type of data, feature

selection data, is used to turn features on or off. Use the following procedures with these two

data types.

NUMERICAL DATA

Numerical data is programmed by using the numeric keys of the system keypad to enter a

number from 0-255. To view the data in a location, a binary process is used. With this process,

the LED’s for zones 1 through 8 are utilized, and the numeric equivalents of their illuminated

LED’s are added together to determine the data in a programming location. The numeric

equivalents of these LED’s are as follows:

Zone 1 LED = 1

Zone 5 LED = 16

Zone 2 LED = 2

Zone 6 LED = 32

Zone 3 LED = 4

Zone 7 LED = 64

Zone 4 LED = 8

Zone 8 LED = 128

Example: If the numerical data to be programmed in a location is “66”, press [6] - [6] on the

keypad. The LED’s for zone 2 and zone 7 will become illuminated indicating 66 is in that

location (2 + 64 = 66).

NX-7002 Installation manual

Page 8

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

Once the data is programmed, press the [*] key to enter the data and advance to the next

segment of that location. After the last segment of a location is programmed, pressing the [*]

key will exit that location, turn the “Ready” LED off and the “Armed” LED on. As before, you are

now ready to enter another programming location. If an attempt is made to program a

number too large for a particular segment, the keypad sounder will emit a triple beep,

indicating an error, and remain in that segment awaiting a valid entry.

Remark: The number in the location will be displayed on the LCD keypad. For locations with a

maximum of 15, the hexadecimal equivalent will be displayed in parenthesis.

Example: 11 (B) or 14 (E).

FEATURE SELECTION DATA

Feature selection data will display the current condition (on or off) of eight features associated

with the programming location and segment selected. Pressing a button on the keypad (1

through 8) that corresponds to the “feature number” within a segment will toggle (on/off) that

feature. Pressing any numeric key between [1] and [8] for selection of a feature will make the

corresponding LED illuminate (feature ON). Press the number again, and the LED will

extinguish (feature OFF). You will see that numerous features can be selected from within one

segment. For instance, if all eight features of a segment are desired, pressing [1] - [2] - [3] - [4]

- [5] - [6] - [7] - [8] will turn on LED’s 1 through 8 as you press the keys, indicating that those

features are enabled.

LCD keypad users note: The numbers of the enabled features will be displayed. However, the

features not enabled will display a hyphen (-).

After the desired setting of features is selected for this segment, press the [*] key. This will

enter the data and automatically advance to the next segment of the location. When you are

in the last segment of a location and press the [*] to enter the data, you will exit that location.

This will now turn the “Ready” LED off and the “Armed” LED on. As before, you are now ready

to enter another programming location.

NX-7002 Installation manual

Page 9

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

START UP, ENROLLING AND TESTING THE NX-7002

Inserting the SIM card

Note: You must be free of all static electricity when handling electronic components.

•

Always power down the system before inserting a SIM Card.

Locate the SIM card holder n on the board.

Open the SIM card holder by sliding the metal clip as shown in o and lifting the holder.

The SIM card holder opens p.

Slide the SIM card into the holder using the guides. Make sure the contacts (gold pads)

face the circuit board and the angled corners face out q.

•

Ensure the SIM card is inserted correctly in the holder and close the SIM card holder r.

Slide the metal clip back to the original position as shown in s.

Power up the system. Do not enter programming mode until the SIM card selects the

network operator. The SIM card automatically selects a network operator when enrolled

on the network. To manually select an operator, enter the relevant network operator in

location 170. See Appendix 2: Operator ID Codes for a list of operator ID codes. Most SIM

cards contain a pre-programmed SMS service centre address and under normal

circumstances, this should not be changed. If you do need to change it, include the

international country prefix using a '+' instead of leading zeros. Program ‘13’ to insert ‘+’

in the address.

NX-7002 Installation manual

Page 10

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

Enrolling the SIM card on the GSM network

•

Insert the SIM card. See Inserting the SIM card for more information.

Power up the NX-7002 GPRS module.

Enter programming mode. See Programming he NX-7002 GPRS module for more

information.

•

Press 78# to select the module.

Press 169# to enter the GSM SIM PIN code location.

Enter the first digit of the SIM PIN code. Press * to move to the next segment. Continue in

this way until all digits are programmed. Press # to save the changes and exit the

location.

•

Exit programming mode. The SIM is automatically enrolled on the GMS network.

Note: Each time you exit programming mode, the modem restarts and reads the PIN

number, network operator and SMSC address number from the NX-7002 configuration.

Enrolling the SIM card on the GPRS network

•

Enter programming mode.

Press 78# to select the module.

•

Press 169# to enter the GSM SIM PIN code location.

Enter the first digit of the SIM PIN code. Press * to move to the next segment. Continue in

this way until all digits are programmed. Press # to save the changes and exit the

location.

•

Obtain an Access Point Number from the supplier. Press 60# to enter the Name of GPRS

access point – APN location. Enter the first digit of the APN. Press * to move to the next

segment. Continue in this way until all digits are programmed. Press # to save the

changes and exit the location.

(Optional) You may need to enter the PPP password and PPP User ID required by the

network. To do this, press 32# to select the PPP (dial-up account) user ID location and

program the password. Then press 34# to select the PPP (dial-up account) password

location and program the user ID.

Exit programming mode. The SIM PIN is automatically enrolled on the GSM network.

NX-7002 Installation manual

Page 11

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

Testing the RSSI value

During the enrolling procedure, it is mandatory to check the RSSI value (signal strength) of the

NX-7002 GPRS module and record it in the system documentation. The RSSI value is linked to

the signal level of the GSM network and ranges from 0-31 with 99 as unknown. The RSSI value

may change due to environmental circumstances, for example, additional furniture or metal

constructions. If an RSSI reading is not satisfactory, move the antenna to get a better

reception.

VALUE

DESCRIPTION

The module will not work properly and must be moved to

another location.

Between 1 and 4

The module will work but ideally should be moved to another

location.

These are normal working values for the module located at a

longer distance from the receiver.

Perfect conditions.

Between 5 and 9

Between 10 and 16

Above 17

•

Enter programming mode.

Press 78# to select the NX-7002 GPRS module.

Press 172# to select the Current GPRS RSSI location.

Note the RSSI reading and quit programming.

Testing the GSM and GPRS connection

•

Enter programming mode.

Press 78# to select the NX-7002 GPRS module.

Press 174# to select the Device status flags location.

Check that the SIM card PIN is not blocked: option 1 and option 2 should be ON.

Check that the SIM card is logged onto the GSM network: option 3 should be ON.

Verify if the module is logged into the GPRS network: option 7 should be ON.

Quit programming mode.

See NX-7002 layout and description for an overview of the different Status LED’s on the NX-

7002.

NX-7002 Installation manual

Page 12

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAMMING THE LOCATIONS

LOCATION 0

MODULE MODE OF OPERATION FEATURE SELECTION (8 segments)

This location contains the system characteristics.

Segment 1

1 = Enable site initiated downloading (*98 from a keypad)

Enable remote initiated downloading

2 =

This setting enables the PC to dial into the NX-7002. It is dependent on

other settings (segment 3, 5 and 6).

Remote initiated download must be from known source

If enabled, program the phone number of the PC in location 168.

Enable remote download at test time

3 =

4 =

This setting configures the NX-7002 to automatically dial the PC to

initiate an upload/download session after an autotest. You must

program the autotest in the control panel.

Enable auto-answer incoming CSD GSM download call.

If enabled, the NX-7002 will automatically accept an incoming call.

If disabled, the user needs to accept an incoming call (*99) as soon as a

“ding-dong” is heard on the keypad.

5 =

Callback required for incoming CSD GSM download call

If enabled, the NX-7002 will call back to the PC before starting an

up/download session.

Use V.110 for site-initiated CSD GSM calls

Enable this setting if the PC is on an ISDN line and is using an ISDN

modem.

Use non-transparent mode for site initiated CSD GSM calls

If you are experiencing problems with upload/download, change this

setting from transparent mode to non-transparent mode or vice versa.

6 =

7 =

8 =

Use SIA DCS as backup format (Contact ID if off)

This setting selects the reporting format when using another device as

backup. The same format must be set on the backup device.

Reserved

Segment 2

Segment 3

1 =

2-8

Reserved

1 =

2 =

Polling enable for TCP/IP (for UL AA)

If polling is enabled, set the polling period in location 162, segment 6.

Reserved

3-8

Reserved

Segment 4

1-3

4 =

5-8

TCP/IP reporting in SIA (Contact ID if Off)

Reserved

Segment 5-8

NX-7002 Installation manual

Page 13

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

LOCATION 1

DESTINATION SELECTION FOR REPORT CONTROL 1 (1 segment)

The NX-7002 contains up to six report controls. Each report control can be defined for SMS

reporting, TCP/IP reporting or email reporting (not yet available). This location contains the

report destination for report control 1. Select from the table below.

DATA

FORMAT

DESCRIPTION

Report control 1 is disabled

Disabled

TCP/IP 1

TCP/IP 2

Email 1

Reporting to TCP/IP receiver 1

Reporting to TCP/IP receiver 2

Email Reporting to Email Account 1 (not yet

available)

Email 2

Email Reporting to Email Account 2 (not yet

available)

SMS 1

SMS 2

SMS Reporting to Mobile Phone 1

SMS Reporting to Mobile Phone 2

LOCATION 2

BACKUP DESTINATION SELECTION FOR REPORT CONTROL 1 (1 segment)

If the primary destination selection (location 1) fails, a backup destination can be selected. If

using another device as the backup destination, for example, panel dialler, set the reporting

format (SIA or CID) in location 0, segment 2, option 1 and enable test report events for the

backup device. This location contains the backup report destination for report control 1. Select

from the table below.

DATA

FORMAT

DESCRIPTION

Backup Report control 1 is disabled

Backup Reporting to TCP/IP receiver 1

Backup Reporting to TCP/IP receiver 2

Disabled

TCP/IP 1

TCP/IP 2

Email 1

Backup Email Reporting to Email Account 1 (not yet

available)

Email 2

Backup Email Reporting to Email Account 2 (not yet

available)

SMS 1

SMS 2

Backup SMS Reporting to Mobile Phone 1

Backup SMS Reporting to Mobile Phone 2

255

Other dialler

The NX-7002 is not used as backup. Instead another

dialler is used (for example: panel dialler)

LOCATION 3

REPORT DELAY FOR REPORT CONTROL 1 (1 segment)

The delay in seconds before the NX-7002 GPRS module reports. If any other events occur

during this delay, they are sent with the first event in one message if using SMS reporting. This

does not apply if using TCP/IP reporting (it does not support multiple events in one message).

This can be from 0 to 255 seconds.

NX-7002 Installation manual

Page 14

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 4

EVENT SELECTION FOR REPORT CONTROL 1 BY PARTITION (16 segments, feature selection

data)

All events for report control 1 are enabled by default. Select the partition(s) to include in the

event report. Enabled events are formatted into one or more messages according to pre-

configured settings and sent to the selected report destination. Enable the Test Reports event

group if using the NX-7002 as backup to another auxiliary dialler.

Segment 1

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

Alarms (and Restores)

Open / Close

Bypass

Zone trouble

Power trouble (AC failure and Low Battery)

Siren & Line Fault

Test Report

Program, Download & Log full

Tamper

Short Circuit

Sensor Lost

Sensor Low Battery

Expander Trouble

Fail To Communicate

Zone Activity Monitoring

Reserved

LOCATION 5

LOCATION 6

LOCATION 7

DESTINATION SELECTION FOR REPORT CONTROL 2 (1 segment)

This location contains the report destination for report control 2. See location 1.

BACKUP DESTINATION SELECTION FOR REPORT CONTROL 2 (1 segment)

This location contains the backup report destination for report control 2. See location 2.

REPORT DELAY FOR REPORT CONTROL 2 (1 segment)

The delay in seconds before the NX-7002 GPRS module reports to report control 2. See

location 3.

LOCATION 8

EVENT SELECTION FOR REPORT CONTROL 2 BY PARTITION (16 segments, feature selection

data)

All events for report control 2 are disabled by default. See location 4.

DESTINATION SELECTION FOR REPORT CONTROL 3 (1 segment)

This location contains the report destination for report control 3. See location 1.

BACKUP DESTINATION SELECTION FOR REPORT CONTROL 3 (1 segment)

This location contains the backup report destination for report control 3. See location 2.

REPORT DELAY FOR REPORT CONTROL 3 (1 segment)

LOCATION 9

LOCATION 10

LOCATION 11

The delay in seconds before the NX-7002 GPRS module reports to report control 3. See

location 3.

NX-7002 Installation manual

Page 15

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 12

EVENT SELECTION FOR REPORT CONTROL 3 BY PARTITION (16 segments, feature selection

data)

All events for report control 3 are disabled by default. See location 4.

DESTINATION SELECTION FOR REPORT CONTROL 4 (1 segment)

This location contains the report destination for report control 4. See location 1.

BACKUP DESTINATION SELECTION FOR REPORT CONTROL 4 (1 segment)

This location contains the backup report destination for report control 4. See location 2.

REPORT DELAY FOR REPORT CONTROL 4 (1 segment)

LOCATION 13

LOCATION 14

LOCATION 15

The delay in seconds before the NX-7002 GPRS module reports to report control 4. See

location 3.

LOCATION 16

EVENT SELECTION FOR REPORT CONTROL 4 BY PARTITION (16 segments, feature selection

data)

All events for report control 4 are disabled by default. See location 4.

DESTINATION SELECTION FOR REPORT CONTROL 5 (1 segment)

This location contains the report destination for report control 5. See location 1.

BACKUP DESTINATION SELECTION FOR REPORT CONTROL 5 (1 segment)

This location contains the backup report destination for report control 5. See location 2.

REPORT DELAY FOR REPORT CONTROL 5 (1 segment)

LOCATION 17

LOCATION 18

LOCATION 19

The delay in seconds before the NX-7002 GPRS module reports to report control 5. See

location 3.

LOCATION 20

EVENT SELECTION FOR REPORT CONTROL 5 BY PARTITION (16 segments, feature selection

data)

All events for report control 5 are disabled by default. See location 4.

DESTINATION SELECTION FOR REPORT CONTROL 6 (1 segment)

This location contains the report destination for report control 6. See location 1.

BACKUP DESTINATION SELECTION FOR REPORT CONTROL 6 (1 segment)

This location contains the backup report destination for report control 6. See location 2.

REPORT DELAY FOR REPORT CONTROL 6 (1 segment)

LOCATION 21

LOCATION 22

LOCATION 23

The delay in seconds before the NX-7002 GPRS module reports to report control 6. See

location 3.

NX-7002 Installation manual

Page 16

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 24

LOCATION 25

EVENT SELECTION FOR REPORT CONTROL 6 BY PARTITION (16 segments, feature selection

data)

All events for report control 6 are disabled by default. See location 4.

PRIMARY REPORTING FLAG FOR REPORT CONTROLS (1 segment)

The NX-7002 contains up to six report controls. Turn on the relevant option to enable primary

reporting for that report control. Turn off the option to enable secondary reporting for that

report control. When secondary reporting is enabled, the report control acts as a backup for

the control panel.

Segment 1

1 = On: Report Control 1 acts as Primary Reporting;

Off: Report Control 1 acts as Secondary Reporting

2 = On: Report Control 2 acts as Primary Reporting;

Off: Report Control 2 acts as Secondary Reporting

3 = On: Report Control 3 acts as Primary Reporting;

Off: Report Control 3 acts as Secondary Reporting

4 = On: Report Control 4 acts as Primary Reporting;

Off: Report Control 4 acts as Secondary Reporting

5 = On: Report Control 5 acts as Primary Reporting;

Off: Report Control 5 acts as Secondary Reporting

6 = On: Report Control 6 acts as Primary Reporting;

Off: Report Control 6 acts as Secondary Reporting

7-8 Reserved

LOCATION 26 –

LOCATION 31

RESERVED

LOCATION 32

PPP (dial-up account) USER ID, characters 1 - 16 (16 segments)

Optional if using TCP/IP reporting. Contact the network provider to confirm if a PAP login is

required and to obtain the user ID and password.

LOCATION 33

LOCATION 34

PPP (dial-up account) USER ID, characters 17 - 32 (16 segments)

See location 32.

PPP (dial-up account) PASSWORD, 16 characters (16 segments)

See location 32.

LOCATION 35 –

LOCATION 59

RESERVED

LOCATION 60

NAME OF GPRS ACCESS POINT - APN, characters 1 - 16 (16 segments)

This is a mandatory setting if using TCP/IP reporting. Contact the network provider to obtain

the GPRS access point name.

LOCATION 61

NAME OF GPRS ACCESS POINT - APN, characters 17 - 32 (16 segments)

See location 60.

NX-7002 Installation manual

Page 17

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 62

LOCATION 63

NAME OF GPRS ACCESS POINT - APN, characters 33 - 48 (16 segments)

See location 60.

NAME OF GPRS ACCESS POINT - APN, characters 49 – 64 (16 segments)

See location 60.

LOCATION 64 -

LOCATION 100

RESERVED

LOCATION 101

DHCP ASSIGNED IP ADDRESS (4 segments)

When the NX-7002 logs into the GPRS network, it is automatically assigned to an IP address.

This location is a read-only location.

LOCATION 102

LOCATION 103

IP ADDRESS FOR TCP/IP RECEIVER 1 (4 segments)

If using TCP/IP reporting, enter in this location the IP address of the receiver 1.

IP ADDRESS FOR TCP/IP RECEIVER 2 (4 segments)

If using TCP/IP reporting, enter in this location the IP address of the receiver 2.

LOCATION 104 –

LOCATION 118

RESERVED

LOCATION 119

RECEIVER ALARM AND POLL PORT (4 segments)

The number of the TCP/IP port to which polling and alarms are reported. The default port is

9999 and under normal circumstances should not be changed.

LOCATION 120 –

LOCATION 138

RESERVED

LOCATION 139

TCP/IP 1 ACCOUNT NUMBER (8 segments)

The SIA or Contact ID account number used for reporting towards the TCP/IP receiver. SIA

account numbers are 6 digits long. Contact ID account numbers are 4 digits long. Add leading

zeros to create an 8-digit number.

LOCATION 140

LOCATION 141

TCP/IP 1 RECEIVER NUMBER (4 segments)

The phone line receiver number associated with the TCP/IP 1 account.

TCP/IP 1 LINE NUMBER (4 segments)

The line number associated with the TCP/IP 1 account. Enter the account number and

destination number for the receiver.

LOCATION 142

LOCATION 143

TCP/IP 2 ACCOUNT NUMBER (8 segments)

See location 139.

TCP/IP 2 RECEIVER NUMBER (4 segments)

See location 140.

NX-7002 Installation manual

Page 18

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 144

LOCATION 145

TCP/IP 2 LINE NUMBER (4 segments)

See location 141.

SMS 1 ACCOUNT NUMBER (8 segments)

The SIA account number used for SMS reporting. SIA account numbers are 6 digits long. Enter

the first digit of the SIM PIN code in segment 3 (segment 1 and 2 are not used). Press * to move

to the next segment. Continue in this way until all digits are programmed.

LOCATION 146

SMS 2 ACCOUNT NUMBER (8 segments)

See location 145.

LOCATION 147 –

LOCATION 153

RESERVED

LOCATION 154

ACCOUNT NUMBER FOR PARTITION 1 (8 segments)

The account code sent when partition 1 is reported. Use when a different account code for

each partition is required. When there is also an account code set for each report destination

(see location 139/142/145/146), the partition account code takes precedence.

LOCATION 155

LOCATION 156

LOCATION 157

LOCATION 158

LOCATION 159

LOCATION 160

LOCATION 161

ACCOUNT NUMBER FOR PARTITION 2 (8 segments)

See location 154.

ACCOUNT NUMBER FOR PARTITION 3 (8 segments)

See location 154.

ACCOUNT NUMBER FOR PARTITION 4 (8 segments)

See location 154.

ACCOUNT NUMBER FOR PARTITION 5 (8 segments)

See location 154.

ACCOUNT NUMBER FOR PARTITION 6 (8 segments)

See location 154.

ACCOUNT NUMBER FOR PARTITION 7 (8 segments)

See location 154.

ACCOUNT NUMBER FOR PARTITION 8 (8 segments)

See location 154.

NX-7002 Installation manual

Page 19

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 162

TIMERS AND COUNTERS (16 segments, numerical data)

Location 162 contains the duration of various system timing functions.

Segment 1

Segment 2

Segment 3

Max Number of network attempts

The number of report attempts the NX-7002 GPRS module makes to send

a report. This can be from 0 to 15.

Report attempts for FTC

The number of attempts that can be made to a specific report destination

before the Fail to Communicate condition is set. This can be from 1 to 15.

Maximum reports in 24 hours

The NX-7002 GPRS module stops reporting messages when the number

of messages in a 24-hour time frame exceeds this number. This can be

from 1 to 255. If set to 0, there is no limitation.

Time in seconds for overall network attempt

The maximum length of time for each attempt by the NX-7002 to report

to each receiver. If the report is not successful during this time, the

attempt is abandoned. This can be from 0 to 255 seconds.

Reserved

Segment 4

Segment 5

Segment 6

TCP/IP Polling time in minutes

This setting must match the TCP/IP polling time set on a TCP/IP receiver.

The setting on the TCP/IP receiver is determined by the speed of the GPRS

network and cost of data transmission. This can be from 1 to 255. If set to

0, the setting is disabled.

Reserved

Segment 7

Segment 8

Segment 9

Reserved

Segment 10 Baud rate for CSD/GSM download

This setting must match the baud rate set on the PC modem. 4=2400

Baud, 5=4800 Baud, 6=9600 Baud.

Segment 11 GSM line fault RSSI threshold

The acceptable level of the RSSI signal. If the signal falls below this level

for the amount of time set in segment 12, a line fault is generated. This

can be from 1 to 31. If set to 0, the setting is disabled.

Segment 12 GSM line fault time

The length of time the RSSI signal must be below the RSSI threshold

before a line fault is generated. This can be from 0 to 255 seconds.

Segment 13 Control reporting timeout for secondary reporting

The maximum time during which the control panel must report an event.

If the NX-7002 report control (SMS or TCP/IP report control) is set for

secondary reporting and the control panel does not report the event

during this time, the report control reports the event. This can be from 1

to 255 seconds. If set to 0, the setting is disabled.

Segment 14 Reserved

LOCATION 163

SMS 1 PHONE NUMBER (20 segments)

The phone number to which SMS reports are sent. This phone number is independent from the

phone numbers programmed in the control panel. “14” indicates the end of the phone

number. Program “11” to insert “*” in the phone number, program “12” to insert “#” and

program “13” to insert “+”. It is recommended to add the country prefix before the number. For

example, +32 followed by the phone number.

NX-7002 Installation manual

Page 20

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 164

SMS 1 FORMAT (1 segment)

The communicator format used to transmit to the SMS 1 report destination from the NX-7002

GPRS module. Consult the instructions for your central station receiver to determine which

format is compatible. SIA reporting over SMS can be set to one of three modes:

DATA

FORMAT

SIA Separate Events

SIA Combined Events

SIA with Area Modifier

If “0” (Separate Events) is selected, messages are sent using the syntax:

>aaaaaa eennn [eennn …].

For example, >123456 BA001

If “1” (Combined Events) is selected, messages are sent using the syntax:

>aaaaaa eennn [eennn …] [/aaaaaa eennn [eennn …]…] .

For example, >123456 BA001/987654 YT000/345678 TA030

If “2” (Area Modifier) is selected, messages are sent using the syntax:

>aaaaaa eennn[/Rin] [eennn[/Rin] …].

For example, > 987654 BA001/Ri1 BA003/Ri1 YT000 TA030/Ri3.

Syntax Description :

The message opening character.

A six-digit account code.

aaaaaa

nnn

Rin

A two-digit SIA code.

A three-digit number, e.g. zone number.

Area modifier, 'Ri' is literal, n is the area or partition number.

The message closing character.

Separator

[X]

[X …]

X is optional

X is optional and may be repeated one or more times.

NX-7002 Installation manual

Page 21

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 165

LOCATION 166

SMS 2 PHONE NUMBER (20 segments)

See location 163.

SMS 2 FORMAT (1 segment)

See location 164.

Note: By default, not more than 20 SMS messages will be transmitted in a 24 hour time

period. If needed, this number can be changed (see location 162 segment 3).

LOCATION 167

LOCATION 168

SMS SERVICE CENTRE NUMBER (20 segments)

This number is mandatory when SMS reporting is used. Usually the SIM card automatically

dials this number. “14” indicates the end of the phone number. Program “11” to insert “*” in the

phone number, program “12” to insert “#” and program “13” to insert “+”. It is recommended to

add the country prefix before the number. For example, +32 followed by the number.

UPLOAD/DOWNLOAD PHONE NUMBER (FOR CSD GSM) (20 segments)

This number is mandatory if up/downloading via the NX-7002 is required using the call-back

feature. An Up/download call will use the data channel. Contact your network provider to

make sure your SIM card supports the data channel.

Program the call-back number in this location. “14” indicates the end of the phone number.

Program “11” to insert “*” in the phone number, program “12” to insert “#” and program “13”

to insert “+”.

LOCATION 169

LOCATION 170

GSM SIM PIN CODE (8 segments)

Enter the SIM pin code in this location. A “10” indicates the end of the code.

GSM OPERATOR SELECTION (6 segments)

The network operator ID code. Set this to 00000 to allow the SIM card automatically select a

network operator. Alternatively, enter an operator ID code in this location to manually select a

network operator. If using a 5-digit code, enter ‘A’ or ‘10’ after the code. Appendix 2 lists all

network operators and ID codes. An invalid selection or unreachable network will prevent

location 174, segment 3 turning on.

LOCATION 171

LOCATION 172

LOCATION 173

CURRENT GSM OPERATOR (READ ONLY) (1 segment)

This location will show the name of the automatically or manually selected GSM network

operator. This location is read only and only valid when the NX-7002 is logged into the GSM

network. See Appendix 2: Operator ID Codes for a detailed list of operators.

CURRENT GSM RSSI (READ ONLY) (1 segment)

This location will show the RSSI (Received Signal Strength Indicator) value. The RSSI value is

periodically updated when logged into the network. RSSI values range from 0 to 31 with 99 as

unknown. See Testing the RSSI value for more information.

CURRENT GPRS BIT ERROR RATE % (READ ONLY) (1 segment)

This location will show the BER (Bit Error Rate) value in %. The BER value is periodically

updated when logged into the network. BER values range from 0 to 7 with 99 as unknown.

NX-7002 Installation manual

Page 22

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION 174

DEVICE STATUS FLAGS (2 segments)

This location contains specific status information of the GSM/GPRS module. If the option is

”On”, the status condition is true.

1 =

2 =

3 =

4 =

5 =

6 =

7 =

8 =

On: Communication with GSM modem OK

On: SIM card PIN is OK

On: Logged in to the GSM network

On: Sending SMS

On: Using GSM audio connection

On: Using GSM CSD connection

On: Connected to GPRS network

On: SIM card PUK code required

Segment 1

1 =

On: Battery voltage failure

The NX-7002 measures and monitors battery voltage. It shares a

battery with the control panel.

Segment 2

2 =

3 =

On: GSM PSU voltage failure

The main battery creates a 3.8 V power supply for the GPRS modem.

On: Bus voltage failure

The bus supplies a 13.8 V voltage to the NX-7002.

On : Communication channel failure

On : Up/download session in progress

On : Up/download session starting

On : Reporting in Progress

4 =

5 =

6 =

7 =

8 =

On : RSSI level at acceptable level

LOCATION 175

LOCATION 176

LOCATION 177

LOCATION 178

GSM MODEM MANUFACTURER (READ ONLY) (16 segments)

This location displays the manufacturer of the GSM/GPRS modem used on the NX-7002.

GSM MODEM MODEL (READ ONLY) (16 segments)

This location displays the model of GSM/GPRS modem used on the NX-7002.

GSM MODEM SOFTWARE REVISION (READ ONLY) (16 segments)

This location displays the software revision of the GSM/GPRS modem used on the NX-7002.

GSM MODEM SERIAL NUMBER (READ ONLY) (16 segments)

This location displays the serial number of the GSM/GPRS modem used on the NX-7002.

LOCATION 179 –

LOCATION 215

RESERVED

NX-7002 Installation manual

Page 23

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

NX-7002 FOR PRIMARY OR BACKUP REPORTING

NX-7002 for primary reporting

The NX-7002 can be configured to be the primary transmitter. In this case, the NX-7002 acts

as the main alarm reporting device.

If the NX-7002 fails, for example, if there is no GSM coverage or there is jamming, if the

network of the provider is down or there are technical problems on the receiver side, another

device (the onboard dialler of the panel or an auxiliary dialler) can be configured to act as

backup. In this case, set location 2 to 255 (Other dialler) as backup for the NX-7002.

If another dialler is used as the backup device:

•

Enable the Autotest report options in that dialler.

Ensure that the reporting format used in the backup device is the same as the reporting

format used in the NX-7002.

If the NX-7002 fails to report over the GPRS network to the IP receiver, you can use a second

report control from the NX-7002 as backup. For example, use SMS reporting as the backup

report control. In this case, set location 1 to 1 (TCP/IP1) and location 2 to 5 (SMS1).

NX-7002 for backup reporting

The NX-7002 can be configured to transmit events only when the primary dialler (control

panel, auxiliary dialler) fails to do so. In this case, the NX-7002 acts as the backup reporting

device.

The NX-7002 can be configured as the backup device of the control panel in two ways:

1. Backup reporting using a report control (TCP/IP or SMS)

Select the desired report control in location 1 and set the corresponding report control as a

secondary (backup) report control in location 25.

2. Backup reporting using the GSM voice channel

In this case, the NX-7002 acts as a transparent backup device for the control panel. No

programming in the NX-7002 is required, except for the SIM PIN code in location 169. All event

reporting is programmed in the control panel.

The phone number must be programmed twice in the control panel:

•

Program phone number 1 as usual. For example, 011234567.

Enter a “10” in front of phone number 2. For example, 10011234567. This forces the NX-

7002 to dial the phone number instead of the control panel.

•

The special audio cable (included) must be stuffed between the NX-7002 and the control

panel. See NX-7002 layout and description for more information.

NX-7002 Installation manual

Page 24

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

The NX-7002 can be configured as the backup device of an auxiliary dialler (NX-590 TCP/IP

module or NX-570 ISDN module):

•

Select the desired report control in location 1.

Enable the Autotest report options.

Ensure that the reporting format used with the auxiliary dialler is the same as the

reporting format used in the NX-7002.

NX-7002 Installation manual

Page 25

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

NX-7002 PROGRAMMING WORKSHEETS

(Factory defaults are in bold italic text)

LOC

DESCRIPTION

DEFAULT

PROGRAMMING DATA

MODE OF OPERATION FEATURE SELECTION

Segment 1 (Circle Numbers To Program)

Segment 2 (Circle Numbers To Program)

Enable site initiated downloading (*98 from a

keypad)

Use SIA DCS as backup format (Contact ID if off)

Enable remote initiated downloading

Reserved

Remote initiated download must be from

known source

Enable remote download at test time

Reserved

Enable auto-answer incoming CSD GSM

download call

Callback required for incoming CSD GSM

download call

Reserved

Use V.110 for site-initiated CSD GSM calls

Reserved

Use non-transparent mode for site initiated

CSD GSM calls

Segment 3 (Circle Numbers To Program)

Segment 4 (Circle Numbers To Program)

Reserved

Polling enable (for UL AA)

Reserved

TCP/IP Reporting in SIA (Contact ID if off)

Reserved

DESTINATION SELECTION FOR REPORT CONTROL 1

BACKUP DESTINATION SELECTION FOR REPORT

CONTROL 1

REPORT DELAY FOR REPORT CONTROL 1

EVENT SELECTION FOR REPORT CONTROL 1 (BY PARTITION)

Alarms and Restores

Segment 1

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

1-2-3-4-5-6-7-8

Open/Close

Bypass

Zone Trouble

Power Trouble (AC Failure / Low Batt.)

Siren & Telephone Fault

Test Reports

Program, Download, & Log Full

Tampers (zones and box)

Short Circuit

Sensor Lost

Sensor Low Battery

Expander Trouble (incl. keypad)

Failure To Communicate

Zone Activity Monitoring

Reserved

DESTINATION SELECTION FOR REPORT CONTROL 2

BACKUP DESTINATION SELECTION FOR REPORT

CONTROL 2

REPORT DELAY FOR REPORT CONTROL 2

NX-7002 Installation manual

Page 26

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

LOC

DESCRIPTION

Segment 1

DEFAULT

PROGRAMMING DATA

EVENT SELECTION FOR REPORT CONTROL 2 (BY PARTITION)

Alarms and Restores

0-0-0-0-0-0-0-0

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

Open/Close

Bypass

Zone Trouble

Power Trouble (AC Failure / Low Batt.)

Siren & Telephone Fault

Test Reports

Program, Download, & Log Full

Tampers (zones and box)

Short Circuit

Sensor Lost

Sensor Low Battery

Expander Trouble (incl. keypad)

Failure To Communicate

Zone Activity Monitoring

Reserved

DESTINATION SELECTION FOR REPORT CONTROL 3

BACKUP DESTINATION SELECTION FOR REPORT

CONTROL 3

REPORT DELAY FOR REPORT CONTROL 3

EVENT SELECTION FOR REPORT CONTROL 3 (BY PARTITION)

Alarms and Restores

Segment 1

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

0-0-0-0-0-0-0-0

Open/Close

Bypass

Zone Trouble

Power Trouble (AC Failure / Low Batt.)

Siren & Telephone Fault

Test Reports

Program, Download, & Log Full

Tampers (zones and box)

Short Circuit

Sensor Lost

Sensor Low Battery

Expander Trouble (incl. keypad)

Failure To Communicate

Zone Activity Monitoring

Reserved

DESTINATION SELECTION FOR REPORT CONTROL 4

BACKUP DESTINATION SELECTION FOR REPORT

CONTROL 4

REPORT DELAY FOR REPORT CONTROL 4

NX-7002 Installation manual

Page 27

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

LOC

DESCRIPTION

Segment 1

DEFAULT

PROGRAMMING DATA

EVENT SELECTION FOR REPORT CONTROL 4 (BY PARTITION)

Alarms and Restores

0-0-0-0-0-0-0-0

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

Open/Close

Bypass

Zone Trouble

Power Trouble (AC Failure / Low Batt.)

Siren & Telephone Fault

Test Reports

Program, Download, & Log Full

Tampers (zones and box)

Short Circuit

Sensor Lost

Sensor Low Battery

Expander Trouble (incl. keypad)

Failure To Communicate

Zone Activity Monitoring

Reserved

DESTINATION SELECTION FOR REPORT CONTROL 5

BACKUP DESTINATION SELECTION FOR REPORT

CONTROL 5

REPORT DELAY FOR REPORT CONTROL 5

EVENT SELECTION FOR REPORT CONTROL 5 (BY PARTITION)

Alarms and Restores

Segment 1

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

0-0-0-0-0-0-0-0

Open/Close

Bypass

Zone Trouble

Power Trouble (AC Failure / Low Batt.)

Siren & Telephone Fault

Test Reports

Program, Download, & Log Full

Tampers (zones and box)

Short Circuit

Sensor Lost

Sensor Low Battery

Expander Trouble (incl. keypad)

Failure To Communicate

Zone Activity Monitoring

Reserved

DESTINATION SELECTION FOR REPORT CONTROL 6

BACKUP DESTINATION SELECTION FOR REPORT

CONTROL 6

REPORT DELAY FOR REPORT CONTROL 6

NX-7002 Installation manual

Page 28

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

LOC

DESCRIPTION

Segment 1

DEFAULT

PROGRAMMING DATA

EVENT SELECTION FOR REPORT CONTROL 6 (BY PARTITION)

Alarms and Restores

0-0-0-0-0-0-0-0

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

Open/Close

Bypass

Zone Trouble

Power Trouble (AC Failure / Low Batt.)

Siren & Telephone Fault

Test Reports

Program, Download, & Log Full

Tampers (zones and box)

Short Circuit

Sensor Lost

Sensor Low Battery

Expander Trouble (incl. keypad)

Failure To Communicate

Zone Activity Monitoring

Reserved

PRIMARY REPORTING FLAGS FOR REPORT CONTROL 1 TO 6

Segment 1 (Circle Numbers To Program)

On = Report Control 1 is Primary Reporting Flag / Off = Report Control 1 is Backup for control panel

On = Report Control 2 is Primary Reporting Flag / Off = Report Control 2 is Backup for control panel

On = Report Control 3 is Primary Reporting Flag / Off = Report Control 3 is Backup for control panel

On = Report Control 4 is Primary Reporting Flag / Off = Report Control 4 is Backup for control panel

On = Report Control 5 is Primary Reporting Flag / Off = Report Control 5 is Backup for control panel

On = Report Control 6 is Primary Reporting Flag / Off = Report Control 6 is Backup for control panel

Reserved

26 - 31

RESERVED

PPP (dial-up account) user ID (chars 1 - 16)

PPP (dial-up account) user ID (chars 17 - 32)

PPP (dial-up account) password

RESERVED

35 – 59

Name of GPRS access point - APN (chars 1 - 16)

Name of GPRS access point - APN (chars 17 - 32)

Name of GPRS access point - APN (chars 33 - 48)

Name of GPRS access point - APN (chars 49 - 64)

RESERVED

64 - 100

101

NX-7002 assigned IP address (DHCP)

IP address for TCP/IP receiver 1

IP address for TCP/IP receiver 2

RESERVED

0.0.0.0

102

103

104-118

119

Receiver alarm and poll port

RESERVED

9.9.9.9

120-138

139

TCP/IP 1 Account number

TCP/IP 1 Receiver number

TCP/IP 1 Line number

0-0-0-0-1-0-0-0

0-0-0-1

140

141

0-0-0-1

142

TCP/IP 2 Account number

TCP/IP 2 Receiver number

TCP/IP 2 Line number

0-0-0-0-1-0-0-0

0-0-0-1

143

144

0-0-0-1

145

SMS 1 Account number

0-0-0-0-0-0-0-0

146

SMS 2 Account number

147-153

RESERVED

NX-7002 Installation manual

Page 29

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

LOC

154

155

156

157

158

159

160

161

162

DESCRIPTION

Account number partition 1

Account number partition 2

Account number partition 3

Account number partition 4

Account number partition 5

Account number partition 6

Account number partition 7

Account number partition 8

TIMERS AND COUNTERS

DEFAULT

0-0-0-0-0-0-0-0

PROGRAMMING DATA

0-0-0-0-0-0-0-0

Segment 1

Segment 2

Segment 3

Segment 4

Segment 5

Segment 6

Segment 7

Segment 8

Segment 9

Segment 10

Segment 11

Segment 12

Segment 13

Segment 14

Segment 15

Segment 16

Max Number of network attempts

Report attempts for Fail To Communicate

Maximum reports in 24 hours

Time in seconds for overall network attempt

Reserved

TCP/IP Polling time in minutes for PPP connections

Reserved

Baud rate for CSD/GSM download

GSM line fault RSSI threshold

GSM line fault time in seconds

180

Control reporting timeout in seconds for secondary reporting

Reserved

SMS 1 Phone number

14-14-14-14-14-14-14-14-14-

14-14

164

165

SMS 1 Format

SMS 2 Phone number

14-14-14-14-14-14-14-14-14-

14-14

166

167

SMS 2 Format

SMS service centre address (phone number)

14-14-14-14-14-14-14-14-14-

14-14

168

U/D call-back phone number (for CSD GSM)

14-14-14-14-14-14-14-14-14-

14-14

169

170

171

GSM SIM PIN code

10-10-10-10-10-10-10-10

GSM operator selection

0-0-0-0-0-A

Current GSM operator (read only)

Current GSM RSSI (read only)

Current GPRS Bit Error Rate % (read only)

(name of operator)

173

NX-7002 Installation manual

Page 30

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

LOC

DESCRIPTION

DEVICE STATUS FLAGS (read only)

Segment 1

DEFAULT

PROGRAMMING DATA

174

On = Communication with GSM modem OK

On = SIM card PIN is OK

On = Logged in to the GSM network

On = Sending SMS

On = Using GSM audio connection

On = Using GSM CSD connection

On = Connected to GPRS network

On = SIM card PUK code required

Segment 2

On = Battery voltage failure

On = GSM PSU voltage failure

On = Bus voltage failure

On = Communication channel failure

On = U/D session in progress

On = U/D session starting

On = Reporting in progress

On = Good RSSI Level

Segment 3

2-8

On = Max reports in 24h limit reached

Reserved

175

176

GSM modem manufacturer (read only)

GSM modem model (read only)

GSM modem software revision (read only)

GSM modem serial number (read only)

RESERVED

(name of manufacturer)

(name of model)

177

(software revision)

(serial number)

178

179-215

NX-7002 Installation manual

Page 31

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

INSTALLATION GUIDELINES

•

Avoid installing the module:

Where temperatures exceed 49°C or fall below 0°C.

In the immediate vicinity of electronic equipment.

In humid rooms. The module is not hermetically sealed and excess moisture on the

circuit board can eventually cause an electrical fault.

•

Keep the antenna within 2 m of the panel.

Before permanently mounting the module, test it at the intended location to ensure that

the remote alarm receiver can receive signal transmissions. There may be blind or non-

operational locations within the installation. Normally these can be overcome by moving

the antenna.

Note: To test the signal strength at the intended location, insert the SIM card into a mobile

phone and check the strength indicator on the mobile phone.

MOUNTING THE NX-7002

Inside the can, several 2-holed insertion points have been constructed. This allows for either

vertical or horizontal placement of the modules. Notice that each insertion point has two sizes

of holes -a larger hole and a smaller hole.

Diagram 1: The black plastic PCB guides are grooved on one

edge where the PC board will be seated. The end with the half-

moon protrusion fits into the larger hole. The smaller hole is for

the screw.

Diagram 2: Place the first black plastic PCB guide in the top

insertion point, grooved edge downward. The half-moon

protrusion will be in the large hole. It does not require force.

Insert one of the provided screw into the smaller hole (from

inside the can) to secure it in place. A screwdriver should reach

through the notch that runs the length of the guide to tighten

the screw. The second PBC guide should be positioned opposite

the first (grooved edge up) and placed in the lower insertion

point, using the same procedures described above. Once

mounted, screw it in securely.

Diagram 3: The module should slide freely in the grooves of

both guides.

NX-7002 Installation manual

Page 32

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

NX-7002 LAYOUT AND DESCRIPTION

DESCRIPTION

Future use (VVMIQ)

SIM card holder

GPRS modem

Connect antenna to this connector

Header for software upgrade

Connect to battery

Connect main panel battery leads to these connectors

Audio tap connector (CON5)

If the NX-7002 uses the voice channel for event reporting, the special audio cable

(included) needs to be stuffed between this connector of the NX-7002 and the Audio

Tap connector of the control panel.

Keypad bus terminals

Status LED’s

GSM in use: ON when events are send over the voice or data channel (Up/download)

PSU error: ON when the modem power source is to low

Reporting: ON when data is reported to the IP receiver or Mobile phone (SMS)

GPRS active: ON when the module is connected to the GPRS network and the first event is

send. It turns OFF when the module uses the voice channel

SIM error: ON when an incorrect PIN code is entered

GSM com: reserved

Network OK: reserved

Bus com: flashes when communicating on the NetworX bus

Green LED: ON when connected to TCP/IP receiver

NX-7002 Installation manual

Page 33

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

TECHNICAL SPECIFICATIONS

Technical specifications NX-7002

Power supply voltage

Current consumption

- Nominal

12Vdc

30mA at 13.8Vdc

up to 2 Amps peak

max. 12V/7.2Ah

0 - 49° C

Max 93% non condensating

102 x 97 x 24 mm

115 g

- Maximum

Battery

Operating temperature

Humidity

Dimensions (PCB board only) WxHxD

Weight (PCB board only)

NX-7002 Installation manual

Page 34

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

APPENDIX 1: REPORTING FIXED CODES IN CONTACT-ID AND

SIA

The table below lists the event codes sent for the following reports (if enabled) when using Contact ID or SIA

formats.

REPORT

CONTACT ID

601

602

401

406

412

627

628

401

457

605

354

333

351

321

312

309

301

137

120

121

110

100

381

384

380

137

570

451

SIA

MANUAL TEST

AUTOTEST

OPEN (User Number)

CLOSE (User Number)

CANCEL (User Number)

DOWNLOAD COMPLETE

START PROGRAM

END PROGRAM

RECENT CLOSE (User Number)

EXIT ERROR (User Number)

EVENT LOG FULL

FAIL TO COMMUNICATE

EXPANDER TROUBLE (device number)

EXPANDER RESTORE (device number)

TELEPHONE FAULT

TELEPHONE RESTORE

SIREN TAMPER

SIREN RESTORE

AUX POWER OVERCURRENT (device number)

AUX POWER RESTORE (device number)

LOW BATTERY (device number)

LOW BATTERY RESTORE (device number)

AC FAIL (device number)

AC RESTORE (device number)

BOX TAMPER (device number)

BOX TAMPER RESTORE (device number)

KEYPAD TAMPER

KEYPAD PANIC (audible)

KEYPAD PANIC (silent)

DURESS

KEYPAD AUXILIARY 1

KEYPAD AUXILIARY 2

RF SENSOR LOST (zone number)

RF SENSOR RESTORE (zone number)

SENSOR LOW BATTERY (zone number)

SENSOR BATTERY RESTORE (zone number)

ZONE TROUBLE (zone number)

ZONE TROUBLE RESTORE (zone number)

ZONE TAMPER (zone number)

ZONE TAMPER RESTORE (zone number)

ZONE BYPASS (zone number)

BYPASS RESTORE (zone number)

EARLY OPEN / LATE CLOSE

NX-7002 Installation manual

Page 35

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

REPORT

CONTACT ID

SIA

FAIL TO CLOSE

454

391

344

393

ZONE ACTIVITY FAULT

ZONE ACTIVITY RESTORE

RF JAMMING

RF JAMMING RESTORE

SMOKE DETECTOR CLEAN ME

SMOKE DETECTOR CLEAN ME RESTORE

THE NUMBER IN PARENTHESES FOLLOWING THE EVENT IS THE NUMBER THAT WILL BE REPORTED AS THE ZONE NUMBER. IF

THERE ARE NO PARENTHESES, THE ZONE WILL BE “0”. * The character transmitted in this slot will be the first character from the

event code of the zone that is bypassed or in trouble.

SPECIAL REPORTS

CONTACT ID

SIA

FAIL TO COMMUNICATE TCP/IP or SMS

GSM network failure (RSSI value to low)

354

RT002

RT078

NX-7002 Installation manual

Page 36

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

APPENDIX 2: OPERATOR ID CODES

This appendix provides a list of operator codes and the associated operator name.

Operator name

Network name

ID code

On mobile phone

Belgium

Proximus Belgacom Mobile

Mobistar

Proximus

Mobistar

Base

20601

BEL PROXIMUS

20610

20620

B Mobistar

Base

Denmark

TDC Mobil A/S

TDC Mobil

SONOFON

3 DK

23801

23802

23806

23820

23830

DK TDC

SONO

3 DK

Sonofon

Hi3G Denmark ApS

Telia A/S Denmark

Orange A/S

TELIA DK

Orange

TELIA

Orange

France

Orange France

Orange F

SFR

20801

20810

20820

F-FT

SFR

Bouygues Telecom

Germany

Bouygues Telecom

BOUYGTEL

T-Mobile Deutschland GmbH

Vodafone D2 GmbH

E-Plus Mobilfunk GmbH

O2 (Germany) GmbH & Co

Italy

26201

26202

26203

26207

TMO D

Vodafone

E-Plus

OHG O2(Germany) GmbH & Co. OHG

o2 - de

Telecom Italia Mobile

Vodafone Omnitel N.V

Wind Telecomunicazioni SpA

H3G

Telecom Italia Mobile

Vodafone

22201

22210

22288

22299

TIM

voda IT

I WIND

3ITA

Wind Telecomunicazioni SpA

H3G

Ireland

Vodafone Ireland Plc

O2 Communications (Ireland) Ltd

METEOR

Vodafone

27201

27202

27203

IRL Voda, Eircell, Eir Gsm

O2 - IRL

O2 Communications (Ireland) Ltd

METEOR

Jersey, Guernsey and Isle of Man

Jersey Telecom

JT GSM

23450

23455

23458

JT GSM

C&W

Cable & Wireless Guernsey Ltd

Manx Telecom

Cable & Wireless Guernsey

Pronto GSM

Pronto

Netherlands

Vodafone Libertel N.V

KPN Mobile The Netherlands BV

TELFORT B.V.

Vodafone

20404

20408

20412

20416

20420

voda NL

KPN Mobile The Netherlands BV

TELFORT B.V.

NL PTT, NL KPN

NL Tlfrt

T-Mobile Netherlands

Orange Nederland N.V.

Norway

T-Mobile NL

TMO NL

Orange Nederland N.V.

Orange

Telenor Mobil

TELENOR

NetCom

24201

24202

TELENOR

N COM

NETCOM AS

Poland

Polkomtel S.A

PLUS GSM

Era

26001

26002

26003

PL-PLUS

Polska Telefonia Cyfrowa

PTK Centertel

Era

IDEA

IDEA, PL IDEA or PL 03

Portugal

Vodafone Portugal

Optimus Telecomunicacoes, S.A

Telecomunicacoes Moveis Nacionais S.A

Vodafone

OPTIMUS

TMN

26801

26803

26806

voda P

P03, P OPTIMUS, OPTIMUS

P TMN, P TELEMOVEL

NX-7002 Installation manual

Page 37

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

Operator name

Network name

ID code

On mobile phone

Spain

Vodafone Espana S.A.

Retevision Movil S.A

Telefonica Moviles Espana S.A.

Sweden

Vodafone

AMENA

21401

E VODAF

21403

21407

RET MOV, E 03, AMENA

MSTAR

MOVISTAR

TeliaSonera Mobile

HI3G Access AB

TELIA MOBILE

24001

24002

24007

24008

24010

TELIA

Tele 2 AB

COMVIQ

Vodafone

Swefour AB

Vodafone Sverige AB

Swefour AB

voda SE

Spring

United Kingdom

O2 (UK) Limited

23410

23415

23420

23430

23431

23432

23433

O2 -UK

Voda

Vodafone Ltd

Vodafone

Hutchison 3G UK Ltd

T-Mobile (UK) Limited

Orange PCS Ltd

3 UK

T-Mobile UK

Orange

TMO UK

Orange

NX-7002 Installation manual

Page 38

Download from Www.Somanuals.com. All Manuals Search And Download.

09/02/05

www.gesecurity.com

EMEA Distribution is a division of GE Security EMEA bvba

internal use only. GE Security EMEA bvba reserves the right to change information without notice.

NX-7002 Installation manual

Page 39

09/02/05

Download from Www.Somanuals.com. All Manuals Search And Download.

Eagle Electronics Fish Finder Accura 240 User Manual
Edirol Switch V 44SW E1 User Manual
Escient Car Video System M51003 02A7 User Manual
Euro Pro Iron EP480 User Manual
Everpure Water System QL2 OW200L User Manual
First Alert Home Safety Product 2054F User Manual
Furuno Radar Detector FRS1000 User Manual
GE Cable Box A016 1CG User Manual
Gemini Musical Instrument PMX 04 User Manual
Giant Coffeemaker LP122A User Manual