2-9827
Digital Answ er-Phone™
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
We bring good things to life.
To
P re s s
Play message .............................................. 1
Repeat message ......................................... 8
(during playback)
Play previous message ............................. 7
(during playback)
Stop ............................................................... 3
(during playback)
Erase message ........................................... 0
(during playback)
Skip message .............................................. 9
(during playback)
Turn answer OFF ........................................ 5
Turn answer ON ......................................... 6
Record outgoing announcement ............ 8
(Start recording after the beep)
Leave a message ....................................... 7
Play outgoing announcement ................. 2
If unit answers on 10th ring:
Answerer is off — Enter security code to
automatically turn on answerer.
- or -
Memory is full — Enter security code; listen
to messages; reset answerer.
To
P re s s
Play message .............................................. 1
Repeat message ......................................... 8
(during playback)
Play previous message ............................. 7
(during playback)
Stop ............................................................... 3
(during playback)
Erase message ........................................... 0
(during playback)
Skip message .............................................. 9
(during playback)
Turn answer OFF ........................................ 5
Turn answer ON ......................................... 6
Record outgoing announcement ............ 8
(Start recording after the beep)
Leave a message ....................................... 7
Play outgoing announcement ................. 2
If unit answers on 10th ring:
Answerer is off — Enter security code to
automatically turn on answerer.
- or -
Memory is full — Enter security code;
listen to messages; reset answerer.
ad from Www.Somanuals.com. All Manuals Search And Do
To
P re s s
Play message .............................................. 1
Repeat message ......................................... 8
(during playback)
Play previous message ............................. 7
(during playback)
Stop ............................................................... 3
(during playback)
Erase message ........................................... 0
(during playback)
Skip message .............................................. 9
(during playback)
Turn answer OFF ........................................ 5
Turn answer ON ......................................... 6
Record outgoing announcement ............ 8
(Start recording after the beep)
Leave a message ....................................... 7
Play outgoing announcement ................. 2
If unit answers on 10th ring:
Answerer is off — Enter security code to
automatically turn on answerer.
- or -
Memory is full — Enter security code; listen
to messages; reset answerer.
To
P re s s
Play message .............................................. 1
Repeat message ......................................... 8
(during playback)
Play previous message ............................. 7
(during playback)
Stop ............................................................... 3
(during playback)
Erase message ........................................... 0
(during playback)
Skip message .............................................. 9
(during playback)
Turn answer OFF ........................................ 5
Turn answer ON ......................................... 6
Record outgoing announcement ............ 8
(Start recording after the beep)
Leave a message ....................................... 7
Play outgoing announcement ................. 2
If unit answers on 10th ring:
Answerer is off — Enter security code to
automatically turn on answerer.
- or -
Memory is full — Enter security code;
listen to messages; reset answerer.
ad from Www.Somanuals.com. All Manuals Search And Do
INTRODUCTION
Your GE Digital Answer-Phone™ is designed to give you flexibility in use, and
high quality perform ance. To get the m ost from your new telephone, we suggest
that you take a few m inutes right now to read through this instruction m anual. If
you have any questions or problem s, consult the Table of Contents, the Trouble-
shooting Guide, or the Index for the solution.
TABLE OF CONTENTS
INSTALLATION AND SETUP ................................................................................................................... 2
BEFORE YOU BEGIN ....................................................................................................................... 2
BATTERY INSTALLATION ................................................................................................................... 3
TABLETOP INSTALLATION ................................................................................................................. 4
WALL MOUNT INSTALLATION ........................................................................................................... 5
BATTERY LOW INDICATOR ................................................................................................................ 7
ANSWERING MACHINE SETUP ......................................................................................................... 7
RECORDING THE OUTGOING ANNOUNCEMENT .................................................................................... 8
TELEPHONE OPERATION ...................................................................................................................... 9
FLASH BUTTON ............................................................................................................................. 9
REDIAL BUTTON .......................................................................................................................... 10
TEMPORARY TONE FEATURE .......................................................................................................... 10
MEMORY DIALING ........................................................................................................................... 11
STORING A NUMBER IN MEMORY ................................................................................................... 11
DIALING A NUMBER FROM MEMORY ............................................................................................... 12
ANSWERING MACHINE OPERATION ..................................................................................................... 13
MESSAGE PLAYBACK ................................................................................................................... 13
ERASING MESSAGES DURING MESSAGE PLAYBACK .......................................................................... 13
LEAVING A MEMO ....................................................................................................................... 14
CALL SCREENING/AUTO DISCONNECT ............................................................................................. 14
TOLL SAVER FEATURE .................................................................................................................. 15
ACCESSING THE ANSWERER FROM ANOTHER LOCATION ...................................................................... 15
TROUBLESHOOTING TIPS ................................................................................................................... 16
CARE AND MAINTENANCE ................................................................................................................. 18
SERVICE ......................................................................................................................................... 18
INDEX ............................................................................................................................................ 19
LIMITED WARRANTY ......................................................................................................................... 20
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND ARROW-
HEAD WITHIN THE
CAUTION: TO REDUCE THE THE EXCLAMATION
RISK OF ELECTRIC SHOCK, POINT WITHIN THE
DO NOT REMOVE COVER TRIANGLE IS
A
TRIANGLE IS
A
WARNING
SIGN
ALERTING YOU OF
T A
(OR BACK). NO US ER-
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
WARNING SIGN
ALERTING YOU OF
" D A N G E R O U S
VOLTAGE" INSIDE
THE PRODUCT.
I
M
P
O
R
N
T
WARNING: TO PREVENT FIRE
OR ELECTRICAL SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
I N S TRUCTI ON S
ACCOMPANYING
THE P RODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS CHECKLIST
Your package should contain the following item s:
HOUR
AKE
W
MINUTE
SLEEP
AM
PM
WAKE
FM
88
550
•
92
•
96
•
100
•
104
1300
•
108
1600
MHZ
kHZ
AM
•
650
•
800
•
1000
•
•
Long handset cord
Handset
Base unit
Phone line cord
AC power adapter
2
5
8
0
0
5
9
.1
2
INSTALLATION AND SETUP
Your GE Digital Answer-Phone™ can be m ounted on the wall or placed on a
counter top or table top. After you decide which type of installation you want,
refer to the appropriate installation diagram .
BEFORE YOU BEGIN
MODULAR JACK REQUIREMENTS
You need a USOC: RJ 11C type m odular jack, sim ilar to
the one pictured here. If you don't have a m odular
jack, call your phone com pany to find out how to get
one installed.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION
In the event of a power loss, the 9-volt battery backup enables the answerer to
retain m essages stored in m em ory, the outgoing announcem ent, and tim e/day
inform ation.
1. Open the battery com partm ent door
with a flat tool.
2. Insert a 9V battery (not included), as
Y
T T E B R A
shown on the diagram inside the
battery com partm ent.
3. Close the battery com partm ent door.
NOTE: When the battery needs to be replaced,
the BATT. LOW indicator will flash.
BATTERY SAFETY PRECAUTIONS
For your safety, please follow these precautions:
•
•
•
•
Do not recharge, disassemble, mutilate, wet, or dispose of batteries in fire.
Keep batteries out of reach of children.
Replace with 9V battery only (not included).
When replacing batteries, be sure to unplug the phone line from the unit
before inserting the batteries.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLETOP INSTALLATION
6
ANSWERER
volume switch
2
1
PULSE/ TONE switch
RINGER volume switch
1. Plug the telephone line cord into PHONE LINE jack on the back of the unit
and the other end into a m odular jack RJ 11C .
2. Plug the handset cord into the handset and into the telephone jack on the
left side of the unit.
3. Set the PULSE/TONE switch on the left side of the phone to TONE if you use
touch-tone service; set it to PULSE if you have rotary service.
4. Adjust the RINGER volum e switch on the left side of the phone to the
desired setting (the phone will only ring with the ringer set to LO or HI).
5. Adjust the ANSWERER volum e switch on the right side of the phone to the
desired setting.
6. Plug the AC power adapter into the phone and into an AC outlet.
NOTE: Only use the Thomson 5-2399 AC adapter that came with this unit.
Using other adapters may damage the unit.
NOTE: Make sure that you have inserted the battery before installing the
phone. If you have not, see p. 3 for battery installation information.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL MOUNT INSTALLATION
Your phone can be m ounted on a wall
phone plate (not included).
AKE
W
SLEEP
1
1. Rotate the handset hook one-half turn.
AM
2. Plug one end of the telephone line
cord into the jack m arked PHONE LINE
on the back of the unit. Wrap the
excess cord around the plastic tabs.
Plug the other end of the telephone
line cord into a m odular wall jack.
2
3. Attach the wall m ount bracket by
turning the T-shaped bracket upside
down, as pictured. Then put the tabs
at the bottom of the bracket into the
m atching slots near the bottom of the
unit and snap the top tab into place.
3
4. Plug the AC adapter into the back of
the phone and into an AC outlet.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Slip the m ounting holes over
the wall plate posts and slide
the unit down firm ly into
place.
Mounting holes
5
6. Plug one end of the handset
cord into the handset and the
other end into the unit. Hang
up the phone.
DELETE
REVIEW
7. Set the PULSE/TONE switch
on the left side of the phone
to TONE if you use touch-tone
service; set it to PULSE if you
have rotary service.
6
STORE
FLASH
ABC
REDIAL
DEF
MNO
WXY
1
2
5
8
0
3
6
9
GHI
J
KL
4
8. Adjust the RINGER volum e
switch on the left side of the
phone to the desired setting
(the phone will only ring with
the ringer set to LO or HI).
PRS
TUV
7
OPER
#
*
9. Adjust the ANSWERER
volum e switch on the right
side of the phone to the
desired setting.
ANSWERER volume
switch (right side)
9
8
7
O
R I
RINGER volume switch
PULSE/ TONE switch
NOTE: Make sure that you have
inserted the battery before
installing the phone. If you have
not, see p. 3 for battery installa-
tion information.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY LOW INDICATOR
When a battery has not been installed or needs
to be replaced, the BATT. LOW indicator
flashes rapidly.
MESSAGES/ ANSWER ON
indicator light
ANSWERING MACHINE SETUP
HOUR
This section shows you how to set up your
answering m achine to receive incom ing calls.
Before you begin the setup, you m ust be sure
the answerer is on.
MINUTE
TURNING ON THE ANSWERING MACHINE
Press and hold the ANS.ON button to turn the
answering m achine on and off (the unit beeps
twice and a voice prom pts "functions on" or
"functions off").
WAKE
ANS. ON button
NOTE: The unit takes approximately 10
seconds to emit the voice prompts
"functions on" or "functions off."
When the answerer is on, the MESSAGES/
ANSWER ON indicator lights. When the day
and tim e need to be set or the outgoing
announcem ent needs to be recorded, the
MESSAGES/ANSWER ON indicator light
flashes rapidly.
BATT. LOW indicator
SETTING THE VOICE TIME/ DAY
•
•
•
Press and hold the DAY button to set the
day of the week.
Press the HOUR button to set the hour
(a.m . or p.m .).
Press the MINUTE button to set the
m inute. When you hold the MINUTE
button, it advances the tim e in
5-m inute increm ents.
MINUTE button
HOUR button
DAY button
•
Press and quickly release the DAY button
to review the day/tim e setting.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING THE OUTGOING ANNOUNCEMENT
When recording your outgoing announcem ent, you should be about 9 inches
from the MIC, located on the front of the unit, and elim inate as m uch back-
ground noise as possible.
1. Press and hold the ANNOUNCE button.
2. Begin talking after you hear the tone.
3. Release the button when you finish your announcem ent.
SAMPLE OUTGOING ANNOUNCEMENT
Hi, this is (use your name here), I can't answer the phone right now, so please leave your name,
number and a brief message after the tone, and I'll get back to you. Thanks.
REVIEWING THE OUTGOING ANNOUNCEMENT
You can review the outgoing announcem ent by pressing and quickly releasing
the ANNOUNCEMENT button.
NOTE: You can stop the outgoing announcement by pressing STOP while the
announcement is playing.
USING THE DEFAULT ANNOUNCEMENT
Your answering system is equipped with a default announcem ent that says
"Please leave your m essage after the tone." This announcem ent serves as the
default announcem ent each tim e the answering system loses power and is
com pletely reset.
If you installed a battery, your answerer does not default to this announcem ent
when the answerer loses power because your personalized outgoing
announcem ent is retained in m em ory by the battery power. To set the default
announcem ent m anually; press the ANNOUNCEMENT button and release
within one second after the unit beeps.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TELEPHONE OPERATION
MAKING A CALL
HOUR
MINUTE
1. Pick up the handset to get a dial tone.
2. Dial the num ber.
RECEIVING A CALL
Make sure that the RINGER (on the side of the
unit) is set to LO or HI.
WAKE
1. Pick up the handset when the phone
rings.
6
•
100
•
104
1300
•
108
1600
MHZ
kHZ
2. Put handset in cradle when finished with
conversation.
00 • 1000
•
•
FLASH BUTTON
To activate custom er calling services such as
call waiting or call transfer, press the FLASH
button instead of using the hook switch.
(Custom er calling services are provided by
your local phone com pany.)
FLASH button
9
Download from Www.Somanuals.com. All Manuals Search And Download.
REDIAL BUTTON
Redial the last num ber you called by pressing
the REDIAL button after you get a dial tone.
HOUR
MINUTE
NOTE: Your phone's memory retains the
last phone number you dialed (as many as
32 digits). If you pressed any numbers after
dialing the phone number, (for example,
when accessing a voice-menu system) those
numbers are also redialed.
WAKE
6
•
100
•
104
1300
•
108
1600
MHZ
kHZ
TEMPORARY TONE FEATURE
00 • 1000
•
•
If you have Pulse (rotary) service, and want to
access custom er calling services that require
touch-tone dialing, such as getting inform ation
from a local bank, you can use this feature.
1. Press the TONE button (
) after you
*
have connected to the service in order to
enable touch-tone dialing.
2. When you hang up, the phone autom ati-
cally returns to pulse dialing m ode.
REDIAL button
TONE button
1 0
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
Store as m any as 10 num bers in m em ory for easy dialing. Num bers can be
stored in the num bered keys (0-9).
E
HOUR
MINUTE
STORING A NUMBER IN MEMORY
1. Pick up the handset.
2. Press STORE.
3. Dial the num ber to be stored.
4. Press STORE followed by a Mem ory
Location (0-9 on the keypad).
WAKE
5. Write the phone num ber on the m em ory
directory (located in the cradle area of the
base, under the plastic cover).
6
•
100
•
104
1300
•
108
1600
MHZ
kHZ
00 • 1000
•
•
ADDING A PAUSE TO THE DIALING SEQUENCE
Use the REDIAL button to insert a delay in the
dialing sequence when storing a num ber (for
exam ple, when you m ust dial 9 to get an outside
line). Press REDIAL at the point in the dialing
sequence in which a pause is required:
1. Pick up the handset.
2. Press STORE.
STORE button
3. Press REDIAL to add a pause, and then dial
the num ber.
MEMORY DIAL button
4. Press STORE followed by a Mem ory
Location (0-9 on the keypad).
1 1
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING A STORED NUMBER
Change a stored num ber by replacing it with a different num ber (see "Storing a
Num ber in Mem ory"). Be sure to update your m em ory directory when you
change num bers.
DIALING A NUMBER FROM MEMORY
You can dial num bers from m em ory when using the handset. When you get a
dial tone, press the MEMORY DIAL button followed by the Mem ory Location
(0-9) for the num ber you want to dial.
CAUTION: If you make test calls to emergency numbers, remain on the line
and explain the reason for the call. Also, make these calls in off-peak hours,
such as early morning or late evening.
1 2
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING MACHINE
O
PERATION
This section discusses the buttons and features on the answering m achine.
ERASE button
HOUR
AKE
W
MINUTE
SLEEP
REVIEW button
MEMO button
PLAY • STOP button
SKIP button
ANS. ON button
AM
PM
ANNOUNCE button
WAKE
MIC
MESSAGE PLAYBACK
The MESSAGES/ANSWER ON indicator light lets you know when som ebody has
left a m essage. When you have new m essages the light blinks. If you have old
m essages that have not been erased, the light stays on. To hear m essages,
press and release the PLAY•STOP button. Incom ing m essages are lim ited to 3
m inutes each. Press and hold PLAY•STOP for 2 seconds to hear only new
m essages. (If no new m essages, old m essages will play).
While a m essage is playing, you can do the following:
•
•
Press PLAY•STOP to stop m essage playback.
Press and release REVIEW to restart the current m essage; continue to press
and release REVIEW to go to previous m essages.
•
•
•
Press and hold REVIEW to review current m essage.
Press and release SKIP to go to the next m essage.
Press and hold SKIP to fast forward through current m essage.
ERASING MESSAGES DURING MESSAGE PLAYBACK
Press and release the ERASE button to erase the m essage currently playing.
NOTE: Messages erased during playback cannot be restored.
1 3
Download from Www.Somanuals.com. All Manuals Search And Download.
TOTAL MESSAGE ERASE
You can erase all the m essages from m em ory by pressing and holding the
ERASE button when the unit is not playing m essages (the unit beeps to confirm
the m essages are erased). Note that total m essage erase cannot be com pleted if
there are any unplayed m essages.
NOTE: If you hear several high-pitched beeps, your answerer has not erased the
messages because some of them or all of them have not been played.
You can restore m essages erased this way by pressing the PLAY•STOP button—
but only if you haven‘t activated any other answerer functions or received new
m essages after erasing the m essages.
LEAVING A MEMO
Leaving a m em o is just like recording an outgoing announcem ent, except you
use the MEMO button instead of the ANNOUNCEMENT button.
1. Press and hold MEMO.
2. When you hear a beep, continue holding MEMO and leave your m essage.
3. Release MEMO when you finish your m essage.
The m em o is included in the m essage count represented by the num ber of
tim es the MESSAGES/ANSWER ON indicator light flashes.
CALL SCREENING/ AUTO DISCONNECT
Because the answerer autom atically stops recording when any extension phone
is picked up (Auto Disconnect feature), you can screen incom ing calls. Listen as
the caller leaves a m essage and pick up the handset (or any extension phone) if
you want to talk to that caller.
MEMORY FULL
When the m em ory is full, you m ust erase old m essages so that there is room in
the m em ory for new m essages.
If the m em ory is full, the unit answers on the 10th ring and the MESSAGES/
ANSWER ON light flashes rapidly. When using the rem ote access feature, you
can enter your security code and then access your m essages.
NOTE: The unit answers on the 10th ring when it is turned off or the memory is
full. To access the answerer, enter the 3-digit security code after the beep. If
memory is full, play messages and erase some of them to restore memory. If the
answerer is off, press 6 to turn it on.
1 4
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSING THE ANSWERER FROM ANOTHER LOCATION
You can access your answering m achine from a touch-tone phone by
entering the three-digit, security code after you hear the announcem ent.
The security code is located on the underside of your telephone.
1. Dial the phone num ber for the answering m achine.
2. Enter the 3-digit security code after you hear the tone.
3. Follow the voice m enu instructions to perform the answerer functions.
The rem ote feature enables you to perform the following functions:
To
Press this Button
Play m essage
1
Repeat m essage
8 (while m essages are playing)
Play previous m essage
Stop m essage playback
Erase m essage
7 (while m essages are playing)
3 (while m essages are playing)
0 (while m essages are playing)
Skip m essage
9 (while m essages are playing)
Turn answerer off
Turn answerer on
Record new announcem ent
Leave a m essage
5
6
8
7
Play outgoing announcem ent
2
TIP: You can bypass the outgoing announcement by pressing any numbered key
on the keypad while the announcement is playing. Then, after the beep you can
enter your security code to access the answering machine.
TOLL SAVER FEATURE
If you call to retrieve m essages and there are no saved m essages or new
m essages, the unit answers on the 5th ring. If there are saved m essages or new
m essages, the unit answers on the 2nd ring. If you call from a rem ote location
and you hear 3 rings, you can hang up knowing you have no new m essages and
avoid the toll charges.
1 5
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING TIPS
TELEPHONE PROBLEM
SOLUTION/ EXPLANATION
•
•
Check hook switch to m ake sure it pops up.
No dial tone
Can't dial out
Make sure TONE/PULSE is set to correct
position.
•
Unplug the phone, wait 30 seconds, and
plug the phone back in.
•
•
Check RINGER VOLUME.
Phone doesn’t ring
Could have too m any phones on one line.
(See FCC inform ation regarding REN)
•
This is norm al as power is fluctuating with
phone outpulsing.
Light and tone feedback
flutter w hen dialing in
pulse m ode.
•
•
Make sure phone cord is securely plugged in.
Can’t be heard by
other party
Make sure you entered num bers correctly.
(See "Mem ory Dialing.")
Mem ory dialing
problem s
1 6
Download from Www.Somanuals.com. All Manuals Search And Download.
ANSWERING MACHINE PROBLEM
SOLUTION/ EXPLANATION
Can’t hear m essages
•
•
Adjust answerer volum e (p.4)
Tim e/ Day Stam p
stuck at 1 a.m Monday
Set the tim e/day clock (p. 7).
Answ ers on 10th ring
•
•
Make sure answerer is turned on.
Mem ory is full. Play m essages and
erase them . (p. 14)
Incom ing m essages
are incom plete
•
Was an extension phone picked up
while the caller was leaving a m essage?
•
•
Mem ory is full.
You accidentally pressed the
PLAY•STOP button during playback and
stopped the m essage.
•
•
•
Must use a tone-dial phone.
Won’t respond to
com m ands w hen
you call m achine from
another location
Must enter correct security code (p. 15)
Did the unit hang up? If you take no
action for a period of tim e, it autom ati-
cally hangs up.
Answ er function
operates erroneously
or not at all.
•
Unplug the power cord from the back of
the unit and plug it back in to reset the
answerer.
1 7
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
To keep your GE telephone working and looking good, follow these few sim ple
guidelines:
•
Avoid putting the phone near heating appliances and devices that generate
electrical noise. (i.e., m otors, fluorescent lam ps.)
•
•
•
Phone should not be exposed to direct sunlight or m oisture.
Avoid dropping the handset and other rough treatm ent.
Clean telephone with a soft cloth. (Rem em ber to first unplug the phone
from the wall outlet.)
•
•
Never use a strong cleaning agent or abrasive powder, as this will
dam age the finish.
Retain the original packaging for future use.
SERVICE
The FCC requires this product be serviced only by the m anufacturer or its
authorized service agents. In accordance with FCC requirem ents, changes or
m odifications not expressly approved by Thom son Consum er Electronics could
void the user’s authority to operate this product. For instructions on how to
obtain service, refer to the warranty included in this guide or call custom er
service's telephone num ber: 800-448-0329.
Attach your sales receipt to the booklet for future reference or jot down the date
this product was purchased or received as a gift. This inform ation will be
valuable if service should be required during the warranty period.
Purchase date
Store Nam e
1 8
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
P
A
Parts checklist
2
ANS. ON button
7
Pulse (rotary) service 10
PULSE/TONE switch 4, 7
Answering machine setup
Accessing answering machine from
another location 15
7
R
REDIAL button 10
Remote access
from another location 15
Review an outgoing announcement
REVIEW button 13
RINGER volume switch 4, 7
B
Battery Installation
Battery safety precautions
BATT. LOW indicator
3
3
8
7
C
Care and maintenance 18
S
Security code 15
Service 18
Setup 2-7
SKIP button 13
STOP button 13
E
ERASE button 13
Erasing messages 13, 14
F
FLASH button
9
T
Tabletop installation
Temporary tone feature 10
Time/Day stamp
4
H
Handset
2
M
setting up
7
Memo 14
Memory dialing
storing a number 11
dialing a stored number 12
Message playback 13
Troubleshooting tips 16
W
Wall mount installation
5
Modular jack
2
O
Outgoing announcement
8
recording
reviewing
8
8
1 9
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
What your w arranty covers:
•
Any defect in m aterials or workm anship.
For how long after your purchase:
•
Two years.
(The warranty period for rental units begins with the first rental or 45 days from date of shipm ent
to the rental firm , whichever com es first.)
What w e w ill do:
•
•
Provide you with a new, or at our option, a refurbished unit.
The exchange unit is under warranty for the rem ainder of the original product’s warranty
period.
How to m ake a w arranty claim :
•
Properly pack your unit. Include any cables, etc., which were originally provided with the
product. We recom m end using the original carton and packing m aterials.
Include in the package evidence of purchase date such as the bill of sale. Also print your nam e
and address and a description of the defect. Send standard UPS or its equivalent to:
Thom son Consum er Electronics, Inc.
•
Product Exchange Center
32 Spur Drive
El Paso, Texas 79906
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
A new or refurbished unit will be shipped to you prepaid freight.
What your w arranty does not cover:
3
•
Custom er instruction. (Your Owner’s Manual provides inform ation regarding operating instruc-
tions and user controls. For additional inform ation, ask your dealer.)
Installation and set-up service adjustm ents.
•
•
•
•
•
•
Batteries.
Dam age from m isuse or neglect.
Products which have been m odified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of God, such as but not lim ited to lightning dam age.
Product Registration:
•
Please com plete and m ail the Product Registration Card packed with your unit. It will m ake it
easier to contact you should it ever be necessary. The return of the card is not required for
warranty coverage.
How state law relates to this w arranty:
•
This warranty gives you specific legal rights, and you m ay have other rights which vary from
state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty inform ation.
•
Model 2-9827A
347A8329-0001 (Rev. 1 E/S)
96-15
P.O. Box 1976, Indianapolis, IN 46206
© 1996 Thom son Consum er Electronics, Inc.
Tradem ark(s) ® Registered
Printed in China
Marca(s) Registerada(s)
Download from Www.Somanuals.com. All Manuals Search And Download.
|