Fujitsu Scanner FI 6670 User Manual

P3PC-2242-04EN  
fi-6670/fi-6770/fi-6750S  
Thank you for purchasing a fi-6670 / fi-6770 / fi-6750S Color Scanner series.  
This Getting Started is the startup guide that summarizes the preparatory  
actions needed before use. Be sure to thoroughly read this manual before you  
start using the scanner.  
Contents  
Read the Operator’s Guide (PDF) included in the Setup DVD-ROM for  
information about the scanner’s operation procedures, daily care, consumables  
replacement, and troubleshooting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Regulatory Information  
ENERGY STAR  
PFU LIMITED, a Fujitsu company, has deter-  
mined that this product meets the ENERGY  
STAR® guidelines for energy efficiency.  
ENERGY STAR® is a registered trademark  
of the United States.  
FCC Declaration  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installa-  
tion. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instruction manual, may cause harmful interference to  
radio communications.  
However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of  
the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and  
receiver.  
• Connect the equipment into an outlet on a circuit different  
from that to which the receiver is located.  
• Consult your dealer or an experienced radio/TV technician.  
FCC warning: Changes or modifications not expressly  
approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
Use in High-Safety Applications  
This product has been designed and manufactured on the  
assumption that it will be used in office, personal, domestic,  
regular industrial, and general-purpose applications.  
It has not been designed and manufactured for use in applica-  
tions (simply called “high-safety applications” from here on)  
that directly involve danger to life and health when a high  
degree of safety is required, for example, in the control of  
nuclear reactions at nuclear power facilities, automatic flight  
control of aircraft, air traffic control, operation control in mass-  
transport systems, medical equipment for  
sustaining life, and missile firing control in weapons systems,  
and when provisionally the safety in question is not ensured.  
The user should use this product with adopting measures for  
ensuring safety in such high-safety applications. PFU LIMITED  
assumes no liability whatsoever for damages arising from use  
of this product by the user in high-safety applications, and for  
any claims or compensation for damages by the user or a third  
party.  
The use of a shielded interface cable is required to  
comply with the Class B limits of Part 15 of FCC  
rules.  
The length of the Power cable must be 3 meters  
(10 feet) or less.  
Conventions  
Symbols Used In This Manual  
For notational conventions, the following symbols are used in  
Canadian DOC Regulations  
This digital apparatus does not exceed the Class B limit for  
radio noise emissions from digital apparatus set out in the  
Radio interference Regulations of the Canadian Department of  
Communications.  
this manual.  
This symbol alerts operators to particularly impor-  
tant information. Be sure to read this information.  
This Class B digital apparatus complies with Canadian ICES-  
003.  
Le présent appareil numérique n'émet pas de parasites  
radioélectriques dépassant les limites applicables aux appar-  
eils numériques de la classe B et prescrites dans le Règle-  
ment sur le brouillage radioélectrique dictées par le Ministère  
des Communications du Canada.  
This symbol alerts operators to helpful advice  
regarding operation.  
Naming Conventions in This Manual  
Scanners  
Cet appareil numérique de la classe B est conforme à la  
norme NMB-003 du Canada.  
The scanners are indicated as follows:  
Model  
Indication  
ADF type Scanner  
Flatbed type  
Bescheimigung des Herstellers/  
Importeurs  
Für den fi-6670/fi-6770/fi-6750S wird folgendes bescheinigt:  
• In Übereinsstimmung mit den Bestimmungen der  
EN45014(CE) funkentstört  
• Maschinenlärminformationsverordnung 3. GPSGV: Der  
höchste Schalldruckpegel beträgt 70 dB (A) oder weniger,  
gemäß EN ISO 7779.  
fi-6670  
fi-6770/fi-6750S  
The explanation in this manual bases on the following  
models:  
•ADF type: fi-6670  
•Flatbed type: fi-6770  
Dieses Gerät wurde nicht für die Benutzung in unmittelbarer  
Umgebung starker Lichtquellen (z. B. Projektoren) konzipiert.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Operating Systems and Software Products  
The OSs and products in this manual are indicated as  
follows:  
Screen Examples in This Manual  
The screen examples in this manual are subject to change  
without notice in the interest of product improvement.  
If the actual displayed screen differs from the screen examples  
in this manual, operate by following the actual displayed  
screen while referring to the user's manual of the scanner  
application you are using.  
Product  
Indication  
Windows® 2000 Professional  
(Service Pack 4 or later)  
Windows Windows  
1
2000  
*
Windows® XP Home Edition  
(Service Pack 3 or later)  
Windows® XP Professional  
(Service Pack 3 or later)  
Windows  
XP  
The screen examples used in this manual are of the TWAIN  
driver, ISIS driver, and ScandAll PRO (image scanning appli-  
cation).  
Windows® XP Professional x64  
Edition (Service Pack 2 or later)  
Precautions  
Windows Server® 2003, Standard  
Edition  
Windows Server® 2003, Standard  
x64 Edition  
Windows  
Server  
2003  
Liability Note  
READ ALL OF THIS MANUAL CAREFULLY BEFORE USING  
THIS PRODUCT. IF THIS PRODUCT IS NOT USED  
CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO  
USERS OR BYSTANDERS.  
Also, keep this manual in a safe place so that it can be easily  
referred to during use of this product.  
While all efforts have been made to ensure the accuracy of all  
information in this manual, PFU assumes no liability to any  
party for any damage caused by errors or omissions or by  
statements of any kind in this manual, its updates or supple-  
ments, whether such errors are omissions or statements  
resulting from negligence, accidents, or any other cause. PFU  
further assumes no liability arising from the application or use  
of any product or system described herein; nor any liability for  
incidental or consequential damages arising from the use of  
this manual. PFU disclaims all warranties regarding the infor-  
mation contained herein, whether expressed, implied, or statu-  
tory.  
Windows Server® 2003 R2, Standard  
Edition (Service Pack 2 or later)  
Windows Server® 2003 R2, Standard  
x64 Edition (Service Pack 2 or later)  
Windows Vista® Home Basic  
(32/64 bit) (Service Pack 1 or later)  
Windows Vista® Home Premium  
(32/64 bit) (Service Pack 1 or later)  
Windows Vista® Business (32/64 bit)  
(Service Pack 1 or later)  
Windows Vista® Enterprise  
(32/64 bit) (Service Pack 1 or later)  
Windows Vista® Ultimate (32/64 bit)  
(Service Pack 1 or later)  
Windows  
Vista  
Windows Server® 2008 Standard  
(32/64 bit)  
Windows Server® 2008 R2 Standard  
(64 bit)  
Windows  
Server  
2008  
Windows® 7 Home Premium  
(32/64-bit)  
Use of Mercury  
Windows  
7
Windows® 7 Professional (32/64-bit)  
Windows® 7 Enterprise (32/64-bit)  
Windows® 7 Ultimate (32/64-bit)  
Lamp(s) inside this product contain mercury and  
must be recycled or disposed of according to  
local, state, or federal laws.  
g
H
*1) Where there is no distinction between the different  
versions of the above operating system, the general term  
"Windows" is used.  
To avoid unexpected injuries:  
• Do not put the substance contained in the lamp in your  
mouth as it has mercury.  
• Do not breathe the chemical liquid contained in the scanner  
lamps.  
• Do not incinerate, crush, or shred the lamps or scanner  
parts.  
Arrow Symbols in This Manual  
Right-arrow symbols (D) are used to separate icons or menu  
options you should select in succession.  
Example: Select [Tool] D [Scan Setting].  
Maintenance  
The user must not perform repairs on this scanner.  
Contact the store where you purchased the scanner or an  
authorized FUJITSU Image Scanner service provider to make  
repairs to this product.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safety Information  
Warning Label  
Warning Indications Used In This  
Manual  
The following indications are used in this manual to obviate  
any change of accident or damage to you and/or the equip-  
ment.  
This indication alerts operators to an  
operation that, if not strictly observed,  
may result in severe injury or death.  
HOT warning label:  
This indication alerts operators to an  
operation that, if not strictly observed,  
may result in safety hazards to personnel  
or damage to equipment.  
The glass surface inside the ADF becomes hot  
during the operation. Be careful not to touch glass  
surfaces inside the ADF.  
To avoid burns, never touch around the area  
indicated by this label.  
A TRIANGLE symbol indicates that  
special care and attention is required.  
The drawing inside the triangle shows  
the specific caution.  
A CIRCLE with a diagonal line inside  
shows action which users may not  
perform.  
The drawing inside or under the circle  
shows the specific action that is not  
allowed.  
Take care not to pinch your fingers while turning the ADF.  
Outline characters on a colored  
background show instructions users  
should follow.  
It may also include the drawing that  
shows the specific instruction.  
You must NOT remove this warning label from your  
scanner. When it gets old or unreadable by stain-  
ing or scratches, contact the store where you  
purchased the scanner or an authorized FUJITSU  
scanner service provider.  
The following are important warnings described in this manual.  
Do not damage the Power cable.  
A damaged Power cable may cause fire or  
electric shock. Do not place heavy objects on  
Power cables, or pull, bend, twist, heat,  
damage or modify Power cables.  
Do not use damaged Power cables or power  
plugs, or install any cables or power plugs to  
loose wall sockets.  
Use only specified Power cables and  
interface cables.  
Use only specified Power cables and interface  
cables. Failure to use the correct cables might  
cause electric shock and/or equipment failure.  
Do not use the Power cable provided with the  
scanner for other devices, since this might  
cause equipment failure and other troubles or  
an electric shock.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Make sure to ground the scanner.  
Make sure to ground to avoid electric shock. Be  
sure to ground before plugging into a Power  
outlet.  
Unplug from the outlet before removing the  
ground connection.  
Do not put liquids inside the scanner.  
Do not insert or drop any metal objects into the  
ADF slot or ventilation ports on the scanner.  
Do not scan any wet documents or documents  
with paper clips or staples attached.  
Do not splash or allow the scanner to get wet.  
If foreign objects (water, small metal objects,  
liquids, etc.) get inside the scanner, immedi-  
ately disconnect the power plug from the Power  
outlet. Then, contact the store where you  
bought the scanner or an authorized FUJITSU  
scanner service provider. Pay particular atten-  
tion to this warning in households where there  
are small children.  
Use the scanner only at the indicated  
power voltage. Do not connect to  
multiple-power strips.  
Use the scanner only at the indicated power  
voltage and current. Improper power voltage or  
current might cause fire or electric shock. Do  
not connect to multiple-power strips.  
Unplug the scanner when a trouble  
occurs.  
Immediately unplug the scanner when a trouble  
occurs.  
Never cut the ground connection until the  
scanner is unplugged from the Power outlet.  
Do not touch the Power cable with  
wet hands.  
Do not touch the power plug with wet hands.  
Doing so might cause electric shock.  
Wipe off any dust from the power  
plug.  
Wipe off any dust from the metal parts on the  
power plug or metal fittings with a soft, dry  
cloth. Accumulated dust might cause fire or  
electric shock.  
Do not disassemble the scanner.  
Do not take apart or modify the scanner. The  
inside of the scanner contains high-voltage  
components.  
Touching these components might cause  
electric shock or fire.  
Do not install the scanner in a  
location that has oil smoke, steam,  
humidity, and dust.  
Do not install the scanner in a location subject  
to oil smoke, steam, humidity, and dust. Doing  
so might cause a fire or electric shock.  
Do not use aerosol or alcohol sprays  
near the scanner.  
Do not use any flammable substance or alcohol  
based cleaning sprays (such as aerosol  
sprays) to clean the scanner.  
Sparks, caused by static electricity, generated  
when blowing off dust and dirt from the outside  
of the scanner, may cause a fire.  
Do not use the scanner if there is a  
strange odor.  
If you detect excessive heat coming from the  
scanner or detect smoke, strange smells or  
noises during the operation, immediately  
disconnect the power plug from the Power  
outlet. Before contacting the store where you  
bought the scanner or an authorized FUJITSU  
scanner service provider, make sure that any  
smoke coming from it has completely stopped.  
Never try fixing such problems by yourself.  
Doing so is dangerous.  
Do not place the scanner within the  
reach of small children.  
To avoid injuries, do not place the scanner in  
an area where small children may be able to  
reach.  
Do not touch the heated section for a  
long time.  
Do not touch the heated section such as the  
bottom of the scanner for a long time.  
Doing so may cause a low-temperature burn on  
your skin.  
Disconnect the power if the scanner  
is damaged.  
If the scanner is damaged for any reason,  
immediately disconnect the power plug from  
the Power outlet. Then, contact the store where  
you bought the scanner or an authorized  
FUJITSU scanner service provider.  
Do not cover the scanner with  
something during its operation.  
Do not use the scanner while covered with a  
blanket, etc. Doing so may raise the tempera-  
ture inside and cause a fire.  
Do not use the scanner where it gets  
wet.  
Do not use the scanner at a place such as a  
bathroom, shower room, or swimming pool  
where it may easily get wet. Doing so might  
cause electric shock or fire.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Avoid any contact when scanner is in  
use.  
Avoid getting a sleeve, necktie, or hair caught  
up in any scanner mechanism during scanning  
since this may cause injuries.  
The following are important cautions described in this manual  
Do not install the scanner on an  
unstable work table.  
When installing the scanner on a work table,  
make sure that the table is flat and level. Place  
the scanner so that none of its parts extend  
beyond the edge of the table.  
Disconnect the power plug from the  
Power outlet when the scanner is not  
in use for a long period of time.  
When the scanner is not going to be used for a  
long period of time, be sure to disconnect the  
power plug from the Power outlet.  
Also, it must be strong enough to support the  
weights of the scanner and other devices.  
Do not install the scanner in direct  
sunlight.  
Firmly insert the power plug.  
Firmly insert the power plug into the Power  
outlet as far it can go.  
Do not install the scanner under direct sunlight  
or near heating apparatus. Doing so might  
cause excessive heat to build up inside the  
scanner, which can cause scanner trouble or  
even fire. Install the scanner in a well-venti-  
lated location.  
Do not block the ventilation ports.  
Do not block the ventilation ports. Blocking the  
ventilation ports generates heat inside of the  
scanner, which may result in fire or scanner  
failure.  
Do not try to move or lift the scanner  
alone.  
When transporting the scanner, never carry it  
alone. The scanner is heavy.  
Do not place heavy objects or stand  
on the top of the scanner.  
Do not place heavy objects on the scanner or  
stand on its top to perform other work.  
Doing so might cause injuries and equipment  
failure.  
Before moving the scanner, make  
sure the transport lock is locked.  
(Flatbed type)  
When moving the scanner, be sure to lock the  
transport lock and the ADF transport lock in  
order to prevent damage to the scanner.  
Do not use the scanner immediately  
after moving it from a cold place into  
a warm room.  
Do not use the scanner immediately after  
moving it from a cold place into a warm room.  
Condensation may occur, which might lead to  
scanning errors. Let the scanner dry for one or  
two hours before you use it.  
Handle documents carefully.  
When handling documents, be careful not to  
cut your fingers with them.  
Do not make the scanner wet while  
carrying it outside.  
Before moving the scanner, discon-  
nect the power plug from the Power  
outlet.  
When carrying the scanner outside while it is  
raining or snowing, pay special attention so the  
scanner does not get wet.  
Do not move the scanner with the power and  
interface cables connected as this can damage  
the cables, which can later cause fire, electric  
shock as well as injuries.  
Before moving the scanner, be sure to discon-  
nect the power plug from the Power outlet, and  
all other interface cables. Make sure that the  
floor is free of any obstructions.  
Protect the scanner from static  
electricity.  
Install the scanner away from strong magnetic  
fields and other sources of electronic noise.  
Also, protect the scanner against any static  
electricity, which can cause the scanner to  
malfunction.Choose a static-free place to  
install the scanner.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Preparation  
Contents of the Scanner Package  
When you unpack the scanner package, make sure that all of the following parts are included in the  
package.  
Make sure the scanner package contains all the parts listed in the package contents list that is included  
in the package box.  
If any parts are missing or defective, contact your FUJITSU scanner dealer or an authorized FUJITSU  
scanner service provider.  
Scanner (x1)  
ADF paper chute (x1)  
Stacker (x1)  
AC cable (The contents may vary depending on the country and  
the model purchased.)  
USB cable (x1)  
Setup DVD-ROM (x1)  
Getting Started (x1)  
QuickScan™ Pro brochure (x1)  
Operator panel overlay (x5)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Part Names and Functions  
This section describes the scanner parts and their functions.  
For information on the function of each part, refer to “Section 1.2 Scanner Parts and Their Functions” in  
the Operator’s Guide.  
fi-6670 (ADF type)  
Chute Roller Cover  
ADF Paper Chute  
ADF (automatic document feeder)  
Stacker  
Paper Chute  
Extension  
Stacker Extension  
Side Guide  
Stopper  
Side Guide Button  
EXT Connector  
Operator Panel  
fi-6670  
SCSI ID Switch  
ADF Open Button  
Power Connector  
Ventilation  
Port  
Main Power Switch  
CGA Board Slot  
SCSI Connector  
USB Connector  
Cable Cover  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
fi-6770/fi-6750S (Flatbed type)  
Chute Roller Cover  
ADF Paper Chute  
ADF (automatic document feeder)  
Stacker  
Paper Chute  
Extension  
Stacker Extension  
Side Guide  
Stopper  
Side Guide Button  
Operator Panel  
Flatbed  
Transport Lock  
Document Cover  
Handle  
ADF Lock Screw  
Document Holding  
Pad  
Lock Screw Storage Hole  
Document Bed  
ADF Open Button  
fi-6770  
CGA Board Slot  
SCSI ID Switch  
USB Connector  
SCSI Connector  
fi-6750S  
Ventilation Port  
Power Connector  
Main Power Switch  
USB Connector  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Model-Common Parts  
Brake Roller (x1) (consumable)  
Pick Arm (x1)  
Brake Roller Holder (x1)  
Feed Roller (x4)  
Ultrasonic Sensor (x2)  
(for multifile detection)  
Plastic Roller (x4)  
Chute Roller (x1)  
(Usually covered with a hood)  
Glass (x2)  
Pick Roller Cover (x1)  
Sheet Guide (x2)  
Pick Roller (1 x 2 types) (consumable)  
Functions of the Operator Panel  
The Operator Panel is comprised of a Function Number Display, buttons, and LEDs, which are used to  
operate the scanner and to check the scanner status.  
For information on how to configure settings for scanning using the [Scan/Stop] or [Send to] button,  
refer to the help topics the TWAIN scanner driver contained in the Setup DVD-ROM, or the section  
“Using the Scanner Buttons to Start A Scan Quickly” in the Operator’s Guide.  
ADF type  
Two Operator Panels are mounted on the scanner; one each on each side. You can use  
whichever is convenient for you.They can be folded back in place when they are not used. The  
scanner status can be checked while the Operator Panels are folded back in place.  
Function Number Display  
[Function] button  
Funtion  
Scan / Stop  
Power  
Check  
Send to  
[Power] button/Power LED  
[Scan/Stop] button  
[Send to] button  
Check LED  
LED  
Lights in green when the scanner is ON.  
Lights in orange when an error occurs.  
When the Operator Panel  
is folded back in place  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Flatbed type  
Check  
Check LED  
Function Number Display  
[Function] button  
Function  
Send to  
[Send to] button  
Scan / Stop  
[Scan/Stop] button  
[Power] button/Power LED  
Power  
Name  
Description  
Lights (in orange) when an error occurs.  
Indicates the scanner status.  
Check LED  
Function Number Display  
[Function] button  
[Send to] button  
Switches the function activated by the [Send to] button.  
Launches linked application software for scanning.  
Resets an error indication.  
Launches linked application software for scanning.  
Resets an error indication.  
[Scan/Stop] button  
Cancels ongoing scanning.  
Turns the scanner ON and OFF.  
Lights (in green) when the scanner is turned ON.  
[Power] button/Power LED  
Indications on the Function Number Display  
Indication  
Function  
8
P
1
Blinks only one time upon turning on the scanner.  
Indicates that the scanner has been turned ON and is being initialized.  
Indicates that the scanner is ready for scanning.  
This means initialization has ended successfully after power-on. This status is called “Ready  
Status.”  
Indicates that a recoverable error occurred during scanning with the scanner.  
“J” or “U” and an “error number” are displayed alternately.  
J
U
For details of the errors, refer to “Temporary Errors“ in the Operator’s Guide.  
After the error has been resolved, you can return to the Ready Status (see “1” above) by  
pressing the [Scan/Stop] or [Send to] button.  
E
F
C
H
A
L
Indicates that an abnormality (device error) occurred in the scanner during its initialization or  
during scanning documents.  
“E”, “F”, “C”, “H”, “A”, or “Land an “error number” are displayed alternately. When the error  
number is displayed, turn the Main Power Switch OFF and then ON again. If the error  
persists after this, contact the dealer where you purchased the scanner or an authorized  
FUJITSU scanner service provider.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Installing the Scanner  
The following describes how to install the scanner.  
1 Place the scanner at its installation site.  
The outer dimensions and the spaces required for installing the respective scanner types are as  
follows:  
(Unit: mm/inches)  
ADF type  
Flatbed type  
640 (25.1)  
342  
390 (15.3)  
300 (11.8)  
700  
(27.5)  
500  
(13.4)  
(19.6)  
432 (17.0)  
686  
329  
690 (27.1)  
(27.0)  
(13.0)  
1179  
1030 (40.5)  
(46.4)  
Outer dimensions  
Installation space  
2 Unlock the Transport Lock (Flatbed type only).  
Using a coin or similar, rotate the Transport Lock counterclockwise by 90 degree to unlock it.  
3 Adjust the position of the ADF (Flatbed type only).  
1) Holding the handle, lift open the Document Cover.  
2) Remove the ADF Lock Screws, and then set them to the Lock Screw Storage Holes.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3) Gently close the Document Cover.  
4) Change the position of the ADF.  
• Be careful not to pinch your fingers when moving the ADF.  
• Never rotate the ADF by more than 180 degree. Doing so may damage the ADF.  
The ADF can be set to any of the following three positions:  
After repositioning the ADF, be sure that the ADF is firmly locked to the new position.  
Traditional (Factory default)  
Standard (Space-saving type and for right-handed  
operators)  
Slide the ADF toward the center of the scanner.  
Note the following explanation in this manual is based upon  
this standard type of the scanner.  
Reversed (Space-saving type and for left-handed  
operators)  
Slide the ADF toward the center of the scanner, and then  
rotate it counterclockwise by 180 degree.  
4 Attach the Stacker and the ADF Paper Chute to the scanner.  
1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner.  
2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner.  
Hook  
Protruding section  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Connecting the Cables  
The following describes how to connect the cables between the scanner and your computer.  
The type of the connector for the cable depends on the scanner model you use. Confirm the scanner  
model and use the correct cable.  
ADF type  
fi-6670  
3
USB or SCSI connection  
2
5
SCSI ID  
SCSI cable  
USB cable  
1
4
Flatbed type  
fi-6770  
3
USB or SCSI connection  
fi-6750S  
USB connection  
SCSI ID  
4
USB cable  
SCSI cable  
1
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1 Make sure that the computer is turned OFF.  
2 Open the Cable Cover (ADF type only).  
3 Connect the scanner to your computer either with a USB or SCSI cable.  
You cannot make both USB and SCSI cable connections at the same time.  
You cannot connect multiple computers to the scanner at the same time.  
Turn off the scanner and your computer first when you switch the interface cable.  
The following describes the requirements for connecting with the respective cables.  
USB cable  
• Be sure to use the USB cable which comes as an accessory with this scanner.  
• When connecting to an USB hub, use the first stage USB hub that is closest to the computer. If you use  
the second or later hub stages, the scanner may not operate correctly.  
• If you connect the scanner with USB 2.0, it is required that the USB port and the Hub be compliant with  
USB 2.0. The scanning speed slows down when you connect the scanner with USB 1.1.  
SCSI cable  
Be careful not to damage any pins of the SCSI connector when connecting the scanner to  
your computer.  
• When using the scanner with a SCSI interface, the following types of SCSI cable and SCSI card must  
be purchased.  
• SCSI cable:  
Use a SCSI cable whose connector on the computer side mates to the connector on the SCSI card  
installed on your computer.  
On the scanner side, use a 50-pin high-density type SCSI cable.  
• SCSI card:  
Find the recommended SCSI card information on the Fujitsu website (FAQ):  
• In a SCSI daisy chain formation, connect the scanner so that it is the terminated device.  
• The SCSI ID initially set at the factory is [5]. If the SCSI ID of another SCSI device is set to the same ID,  
change the scanner's SCSI ID to [0] through [7].  
4 Connect the Power cable to the Power Connector of your scanner and to the  
power outlet.  
Be sure to use the supplied power cable. Use of other power cables may cause  
electrical shock or malfunction.  
Do not use the supplied power cable for other products. Doing so may cause  
electrical shock or malfunction.  
5 Close the Cable Cover (ADF type only).  
Let the cables out from the side slots of the scanner.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Installing the Scanner Software  
Brief Information on the Bundled Software  
To scan documents with this scanner, you must install a scanner driver for operating the scanner as well  
as scanning software (hereinafter called the "application") for launching the driver and performing a  
scan.  
The scanner drivers and applications provided with the scanner are as follows:  
TWAIN Driver  
Conforms to the TWAIN standard. Used when you operate the scanner using TWAIN-compliant  
applications.  
ISIS Driver  
Conforms to the ISIS standard. Used when you operate the scanner using ISIS-compliant  
applications.  
Software Operation Panel  
Configures settings for scanning behavior and consumable management. Installed together with  
the scanner drivers (TWAIN/ISIS).  
Error Recovery Guide  
Shows the error status and the action to take when an error occurs. Can be installed together with  
the scanner drivers (TWAIN/ISIS).  
Image Processing Software Option  
A software option featuring advanced binarization of scanned images. Can be installed together  
with the scanner drivers (TWAIN/ISIS).  
Kofax VRS [VRS(scanner model names)] (*1)  
A software program that allows you to generate high-quality images with a simple operation.  
Senses for any documents skewed during scanning, checks for any characters blurred during  
coloring or shading, and then corrects them automatically. Not available with the fi-6750S.  
ScandAll PRO  
ScandAll PRO is a software application for scanning images, which is in compliance with both  
TWAIN/ISIS standards. By assigning scan settings into batch profiles, it enables one-touch  
operations to perform scanning in ways that best suit your needs.  
ScandAll PRO ScanSnap mode Add-in (hereinafter referred to as “ScanSnap  
mode”)  
An add-in application which provides a different set of driver settings as an alternative to using  
ScandAll PRO. TWAIN driver is required to use this application. Enables easy scanning with a  
single button. ScandAll PRO must be installed in order to install this software.  
Scan to Microsoft SharePoint  
Scan to Microsoft SharePoint is a software application for uploading files onto the SharePoint site  
via ScandAll PRO or ScandAll PRO ScanSnap mode Add-in. It can be installed together with  
ScandAll PRO.  
ABBYY FineReader for ScanSnapTM  
Bundled for use with ScanSnap mode, this application converts scanned images into Microsoft®  
Office (Word/Excel™/PowerPoint® ) files. Can be installed together with ScanSnap mode.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
QuickScan ProTM (trial) [QuickScan Pro (Trial)] (*1)  
Conforms to the ISIS standard. By using the ISIS scanner driver together with QuickScan ProTM  
you can read scanned documents and create their images. This bundled QuickScan ProTM is a  
,
trial version, and can be executed 30 times before it is disabled. You will need to purchase the full  
product version if you wish to continue using it.  
Manuals  
Includes Getting Started, and Operator's Guide.  
Scanner Central Admin Agent  
Used to centralize the management of multiple scanners, by allowing you to apply firmware  
updates simultaneously, monitor the operating status, and check the scanner information.  
Note that required applications will differ depending on the form of operation.  
For details, refer to the Scanner Central Admin 4.2 User’s Guide.  
®
Adobe Reader™  
An industry-standard application to display and print PDF documents.  
*1: The product ID used for its installation differs from the official product name. It is shown in [ ].  
The software programs and their supported OSs are as follows:  
Windows 2000 Windows Windows XP Windows  
Windows  
Vista  
Windows  
Server  
Windows  
7
Professional  
XP  
Professional Server  
Home  
Edition  
(32-bit)  
(32/64-bit)  
2003  
(32/64-bit)  
(32/64-bit) 2008  
(32/64-bit)  
(32/64bit)  
TWAIN  
ISIS  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Software Opera-  
tion Panel  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Error Recovery  
Guide  
Image Process-  
ing Software  
Option  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Kofax VRS  
No  
No  
No  
Yes (*2)  
Yes  
No  
Yes (*1)  
Yes  
No  
Yes (*1)  
Yes  
ScandAll PRO  
Yes  
Yes (*3)  
Yes  
ScandAll PRO  
ScanSnap  
mode Add-in  
No  
No  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes (*3)  
Yes (*3)  
Yes (*3)  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Scan to  
Microsoft Share-  
Point  
ABBYY  
FineReader for  
ScanSnapTM  
QuickScan  
ProTM (trial)  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes (*2)  
Yes  
Yes (*2)  
Yes  
Yes (*2)  
Yes  
Yes (*2)  
Yes  
Yes (*2)  
Yes  
Manual  
Scanner Central  
Admin Agent  
Yes  
Yes (*4)  
Yes  
Yes  
Yes  
Adobe®  
Reader™  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes: Supported No: Out of guarantee or not supported  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
*1: Kofax VRS supports the following Windows Vista versions:  
- Windows Vista Business  
- Windows Vista Enterprise  
- Windows Vista Ultimate  
Kofax VRS supports the following versions of Windows 7:  
- Windows 7 Professional  
- Windows 7 Enterprise  
*2: Does not support the Windows 64-bit versions.  
*3: ScandAll PRO, ScandAll PRO ScanSnap mode Add-in, Scan to Microsoft SharePoint, and ABBYY  
FineReader for ScanSnap™ support the following versions of Windows Server 2003:  
- Windows Server 2003 R2, Standard Edition  
- Windows Server 2003 R2, Standard x64 Edition  
*4: Scanner Central Admin Agent supports the following versions of Windows Server 2003:  
- Windows Server 2003 R2, Standard Edition  
- Windows Server 2003 R2, Standard x64 Edition  
Installing the Bundled Software  
The following describes how to install the bundled software from the “Setup DVD-ROM” contained in the  
scanner package.  
You can select either the [INSTALL (Recommended)] or [INSTALL (Custom)] menu when installing the  
Setup DVD-ROM.  
The former installs all the software programs needed to operate the scanner; the latter installs the  
selected software programs one by one.  
If the disk (called the Setup DVD-ROM) is loaded, the window appearing first will ask you to select the  
model you want to use. Select your scanner model, and then install the required software.  
INSTALL (Recommended)  
The software programs to be installed differ depending on the scanner model to use.  
The scanner models and their installable software programs are as follows:  
fi-6670/fi-6770  
fi-6750S  
Yes  
TWAIN  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
ISIS  
No  
Software Operation Panel  
Error Recovery Guide  
Image Processing Software Option  
Kofax VRS  
Yes  
Yes  
Yes  
No  
ScandAll PRO  
Yes  
ScandAll PRO ScanSnap mode  
Add-in  
Yes  
Yes  
Yes  
Yes  
ABBYY FineReader for  
ScanSnap™  
Manual  
Yes  
Yes  
Yes  
Yes  
Scanner Central Admin Agent  
Yes: Installed No: Not installed  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If an old version of the software is installed already, uninstall it first.  
For how to uninstall each of the software, refer to “Appendix 5 Uninstalling the Software” in the Opera-  
tor’s Guide.  
The following describes how to install the software.  
1 Confirm that the scanner is not turned ON.  
2 Turn on your computer and log onto Windows.  
Be sure to log on as a user with "Administrator" privileges.  
3 Insert the Setup DVD-ROM into your disk drive.  
D The [FUJITSU Image Scanner Setup] screen appears.  
If this screen does not appear, find "AutoPlayer.exe" in the Setup DVD-ROM using "Windows  
Explorer" or "Computer" and execute it directly.  
4 Click the [INSTALL (Recommended)] button.  
DThe list of scanners appears.  
5 Select the scanner model name you will be using.  
Then, click the [Next] button.  
To use VRS option (CGA board) (for FI-677CGA), select [xxx + CGA board] (xxx indicates the  
scanner model).  
6 Install the software, following the on-screen instructions.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALL (Custom)  
This menu lets you select and install the required software programs one by one.  
The procedure for custom-installing the required software is as follows:  
If an old version of the software is installed already, uninstall it first.  
For how to uninstall each of the software, refer to “Appendix 5 Uninstalling the Software” in the Opera-  
tor’s Guide.  
1 Confirm that the scanner is not turned ON.  
2 Turn on your computer and log onto Windows.  
Be sure to log on as a user with "Administrator" privileges.  
3 Insert the Setup DVD-ROM into your disk drive.  
D The [FUJITSU Image Scanner Setup] screen appears.  
If this screen does not appear, find "AutoPlayer.exe" in the Setup DVD-ROM using "Windows  
Explorer" or "Computer" and execute it directly.  
4 Click the [INSTALL (Custom)] button.  
DThe [INSTALL PRODUCTS] screen appears.  
5 Click the button for the software to be installed.  
6 Install the software, following the on-screen instructions.  
Repeat Steps 5 and 6 to install other software program(s) here.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Test-Scanning Documents  
Using ScandAll PRO, you can test-scan documents to check if they are scanned with the ADF correctly.  
For how to scan documents with the flatbed, refer to “Chapter 4 Various Documents” in the Operator’s  
Guide.  
The following describes how to test-scan a document:  
1 Turn on the scanner.  
1) Press the “I” side of the main power switch of the scanner.  
2) Press the [Power] button on the Operator Panel.  
The scanner is turned ON, and the Power LED on the Operator Panel lights in green.  
Note that while the scanner is being initialized, the indication of the Function Number Display  
changes as; "8" D "P" D "1", where "1" means that the Operator Panel is in the Ready Status.  
If you see an error indication other than the above on the Function Number Display, refer to  
“Chapter 7 Troubleshooting” in the Operator’s Guide.  
Ex. :If “U” is displayed on the Function Number Display, it means that the Transport Lock  
remains locked. In such case, you need to unlock the Transport Lock.  
For how to unlock the Transport Lock, refer to “Section 2 Installing the Scanner” (on page 13).  
ADF type  
Flatbed type  
Operator Panel  
Check  
Function Number  
Display  
Function  
Send to  
Scan / Stop  
Operator Panel  
Function  
Scan / Stop  
Power  
Power  
Check  
Send to  
[Power] button  
[Power] button  
Function Number Display  
2 Turn on your computer.  
For a SCSI connection, turn on the scanner and confirm that the Function Number Display  
shows “1.Then, turn on your computer.  
3 The scanner is automatically detected, and  
the [Found New Hardware] dialog box  
appears.  
Select [Locate and install driver software  
(recommended)] to install the driver,  
following the on-screen instructions.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 Load a sheet into the scanner.  
1) Load the document on the ADF Paper Chute face down.  
2) Align the side guides to the width of the document.  
3) Pull out the Stacker to the length of the document, and then raise the Stopper.  
5 Launch ScandAll PRO.  
Select the [start] menu D [All Programs] D [Fujitsu ScandAll PRO] D [ScandAll PRO].  
6 Select the [Tool] menu D [Preferences].  
D The [Setup] dialog box appears.  
7 On the [Scan] tab, select a driver to use,  
and then click the [OK] button.  
8 Select the [Scan] menu D [Select Scanner].  
D The [Select Scanner] dialog box appears.  
9 Select the scanner you want to use, and then click the [Select] button.  
Select the scanner model which is connected to your computer. The list of scanner models varies  
depending on the scanner driver installed.  
Model  
TWAIN  
TWAIN  
ISIS/VRS  
ISIS  
Kofax VRS  
fi-6670  
FUJITSU fi-6670dj  
FUJITSU fi-6770dj  
FUJITSU fi-6750Sj  
Fujitsu fi-6670  
Fujitsu fi-6770  
Fujitsu fi-6750S  
Kofax VRS Scanner  
--  
fi-6770  
fi-6750S  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When using Kofax VRS for the first time, the [Register Kofax VRS] screen appears. User regis-  
tration is required to obtain support information from Kofax as well as to upgrade the software,  
though Kofax VRS can still be used without user registration.  
To register later, select [Start] menu - [All Programs] - [Kofax VRS] - [Kofax VRS Administration  
Console], and follow the on-screen instructions.  
For details, refer to the Kofax VRS Installation Guide (PDF) which is included in the Setup  
DVD-ROM (\VRS\SVRS\SVRS\Documentation).  
10Select the [Scan] menu D [Scan Settings].  
D The [Scan Settings] dialog box appears.  
11Clear the [Save to file] checkbox.  
You only check the operation now, so you do not have  
to save to file.  
12Click the [Scanner Setting] button.  
D The scanner driver’s setting dialog box appears.  
13Configure scanner settings such as the resolution and paper size.  
TWAIN scanner driver  
Configure scan settings, and then click the [OK]  
button.  
The setting dialog box of the scanner  
driver may be displayed again after the  
[OK] button is clicked. In such case, click  
the [Scan] button in the dialog box.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ISIS scanner driver  
Configure scan settings, and then click the [OK]  
button.  
Kofax VRS  
Configure scan settings, and then click the [OK]  
button.  
14In the [Scan Settings] dialog box, click the [Scan] button.  
D The scanned document images are displayed in the ScandAll PRO window.  
Refer to “Chapter 7 Troubleshooting” in the Operator’s Guide, in case you see a number and  
an alphabet displayed on the Function Number Display.  
For information about other scanning features, refer to “Chapter 4 Various Documents” in the  
Operator's Guide contained in the Setup DVD-ROM.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
fi-6670/fi-6770/fi-6750S Image Scanner  
Getting Started  
P3PC-2242-04EN  
Issue Date: August 2012  
Issued by: PFU LIMITED  
• Copying of the contents of this manual in whole or in part and copying of the scanner  
application is prohibited under the copyright  
• The contents of this manual are subject to change without notice.  
• PFU LIMITED is not liable whatsoever for any damages resulting from use of this  
scanner and procedures described in this manual, profit due to defects, and any  
claims by a third party.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eclipse Fujitsu Ten Car Speaker Speaker 512 User Manual
Eizo Computer Monitor F730 User Manual
Euro Pro Food Processor KP81E User Manual
Fisher Paykel Refrigerator N169T User Manual
Fisher Price Car Seat 79701 User Manual
Freestyle Watch Shark Clip User Manual
GE Dishwasher Stainless Steel Tub Dishwasher User Manual
Gefen Switch 4x1 DVI Switcher User Manual
Generac Power Systems Portable Generator 0940 1 User Manual
GE Telephone 29255 Series User Manual