Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S6230
Document Date: 11/03/2004
Document Part Number: FPC58-1267-01
F U J I T S U C O M P U T E R S Y S T E M S
Download from Www.Somanuals.com. All Manuals Search And Download.
S
S e r i e s B I O S
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for
Navigating Through The Setup Utility to make any
changes.
*Note that actual drive labels shown may vary.
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control panel
or double-click on the time in the system
tray at the bottom right of the screen.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
the field’s function and any special information needed
to help understand the field’s use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
System Time:
System Date:
[02:34:56]
[04/21/2004]
Adjust calendar clock.
Primary Master
[TOSHIBA MK4025GAS -(PM)]
Secondary Master
[MATSHITADVD-RAM UJ-830S -(SM)]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Language:
[English (US)]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed below may differ, as determined by your system configuration.
Menu
Field
Options
Default
Description
System
Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour
format of hours:minutes:seconds with 2 digits for each.
(HH:MM:SS). Example: 16:45:57. You may change
each segment of the time separately. Move between
the segments with the [Tab] key and/or [Shift] + [Tab]
keys.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed below may differ, as determined by your system configuration.
Menu
Field
Options
Default
Description
System
Date:
–—
–—
Sets and displays the current date. Date is in a month/
day/year numeric format with 2 digits each for month
and day and 4 digits for year. (MM/DD/YYYY) for
example: 10/16/2001. You may change each segment
of the date separately. Move between the segments
with the [Tab] key and/or [Shift] + [Tab] keys.
Primary
Master:
Selects Primary
Master submenu
The product # of the
Hard Drive
Display the type of device on this ATA/ATAPI interface,
if there is one. Pressing the Enter key selects the Pri-
mary Master submenu allowing additional device con-
figuration options for this interface.
Secondary
Master:
Selects Secondary
Master submenu
The product
number of the CD-
ROM
Display the type of device on this ATA/ATAPI interface,
if there is one. Pressing the Enter key selects the Sec-
ondary Master submenu allowing additional device
configuration options for this interface
Language:
• English (US)
• Japanese (JP)
[English (US)]
The default setting differs between the US/European
and the Japanese model. Selects the display language
for the BIOS.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
*Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylinders,
heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Primary Master [TOSHIBA MK4025GAS -(PM)]
Item Specific Help
Type:
[Auto]
LBA Format
78140160
40008MB
Select ATA/ATAPI drive
installed here.
Total Sectors:
Maximum Capacity:
[Auto]
The BIOS auto-types the
drive on boot time.
Multi-Sector Transfers:
LBA Mode Control:
[16 Sectors]
[Enabled]
PIO Transfer Mode:
DMA Transfer Mode:
[Multiword DMA 2]
[Disabled]
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
Type:
• Auto
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type automati-
cally identified by the BIOS at POST. If None is selected, all of the following
Set-up items do not appear. Select CD-ROM if a CD-ROM drive is installed at
this connection. If Hard Disk is selected, you must specify the number of Cyl-
inders, Heads, and Sectors for the drive.
• None
• CD-ROM
• Hard Disk
CHS Format (Cylinders, Heads, Sectors)
Cylinders:
• A number
between 0
and 65,535
–—
This appears only when Hard Disk is selected. When Hard Disk is selected,
you can change the value. This field is incremented by pressing the [Space-
bar]). This field is decremented by pressing the [-] key. You can also change
the field by typing in the number.
Heads:
• A number
between
1 and 16
–—
This appears only when Hard Disk is selected. When it is selected, you can
change the value. This field is incremented by pressing the [Spacebar]). This
field is decremented by pressing the [-] key. The field can also be changed by
typing in the number.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
Sectors:
• A number
between
0 and 63
–—
This appears only when Hard Disk is selected. When it is selected, you can
change the value. This field is incremented by pressing the [Spacebar]. This
field is decremented by pressing the [-] key. The field can also be changed by
typing in the number.
Maximum
Capacity:
• Display only
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Hard Disk is selected.
LBA Format (Logical Block Addressing)
Total
Sectors:
–—
–—
–—
–—
The total number of sectors on your hard disk.
The maximum capacity of your hard disk.
Maximum
Capacity
CHS and LBA Formats
Multi-
Sector Trans-
fers:
• Disabled
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the number of
sectors per block for multiple sector transfer.
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
LBA Mode
Control:
• Disabled
• Enabled
[Enabled]
Enables or disables Logical Block Addressing in place of Cylinder, Head, Sector
addressing. This can’t be changed when Auto is selected.
Transfer
Mode:
• Standard
• Fast PIO 1
• Fast PIO 2
• Fast PIO 3
• Fast PIO 4
• Multiword
DMA 1
[Multiword
DMA 2]
Selects the method for moving data to/from the drive. Autotype the drive to
select the optimum transfer mode. This option cannot be changed when
Auto is selected.
• Multiword
DMA 2
Ultra DMA
Mode:
• Disabled
• Mode 0
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
[Disabled]
Selects the method for moving data to/from the drive. Autotype the drive to
select the optimum transfer mode. This option cannot be changed when
Auto is selected.
A bootable CD-ROM may have a floppy disk format or a hard drive format. When the bootable CD-ROM is used,
the drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is
used, the CD-ROM becomes Drive A. The CD-ROM will only take Drive C: (hard drive format) if the internal hard
drive is not present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal
hard drive is present, since the C: designator is always reserved for the internal hard drive. The boot sequence
ignores the new drive designations, but your application software will use the new designations.
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal CD-
ROM drive. The drive type is displayed on this menu as
well as the Main menu. Your notebook auto-senses the
characteristics of the internal CD-ROM Drive installed.
You will not need to modify these settings; they are
displayed for your reference.
Note that actual drive labels shown may vary.
PhoenixBIOS Setup Utility
Main
Secondary Master [MATSHITADVD-RAM UJ-830S -(SM)]
Item Specific Help
Type:
[Auto]
Select ATA/ATAPI drive
installed here.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[Disabled]
[Disabled]
[Standard]
[Disabled]
[Auto]
The BIOS auto-types the
drive on boot time.
Ultra DMA Mode:
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 3. Primary Slave Submenu
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Default
Description
Type:
• Auto
• None
• CD-ROM
• Hard Disk
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the
type automatically identified by the BIOS at POST. If None
is selected, all of the following Set-up items do not appear.
Select CD-ROM or Hard Disk for appropriate drive type
installed at this connection.
Multi-Sector
Transfers:
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
[Disabled]
[Disabled]
This option cannot be changed when Auto is selected.
Specify the number of sectors per block for multiple sector
transfer.
LBA Mode Con-
trol:
• Disabled
• Enabled
Enables or disables Logical Block Addressing in place of
Cylinder, Head, Sector addressing. This option cannot be
changed when Auto is selected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Default
Description
Transfer Mode:
• Standard
• Fast PIO 1
• Fast PIO 2
[Standard]
Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.
• Fast PIO 3
• Fast PIO 4
• Multiword DMA 1
• Multiword DMA 2
Ultra DMA
Mode:
• Disabled
• Mode 0
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
[Disabled]
Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu.
If you wish to move to another menu, use the cursor keys.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
• Set the features of the keyboard/mouse.
• Select between the display panel and an external
CRT display.
• Configure IDE devices in your system.
• Configure CPU features.
See Navigating through the Setup Utility for more infor-
mation.
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function and any special information
needed to help understand the field’s use.
• Configure USB features.
• Configure the power button.
• View DMI Event Logging
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
Note that not all fields appear in all configurations; the
fields that appear are dependent upon the system CPU.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
Keyboard/Mouse Features
Video Features
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 4. Advanced Menu
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
Keyboard/Mouse
Features
When selected, opens the Keyboard/Mouse Features submenu, which enables and disables the
power-on state for [NumLock].
Video Features
When selected, opens the Video Features submenu, which allows setting of the display
parameters, including routing of video signals to different displays.
Internal Device
Configurations
When selected, opens the Internal Device Configuration submenu, which allows enabling or
disabling the IDE Controller.
CPU Features
USB Features
When selected, opens the CPU Features submenu, which allows enabling or disabling the
SpeedStep™ Technology feature for optimal battery life.
When selected, opens the USB Features submenu, which allows enabling or disabling of Legacy
Floppy Emulation.
Miscellaneous
Configurations
When selected, opens the Miscellaneous Configurations submenu, which allows you to
configure the power button.
Event Logging
When selected, opens the event logging submenu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for selecting the power-on state for the NumLock key.
PhoenixBIOS Setup Utility
Advanced
Security
Power Savings
Exit
Keyboard/Mouse Features
[Off]
Item Specific Help
Numlock
Select power-on state
for Numlock.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 5. Keyboard/Mouse Features Submenu
Table 5: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Numlock:
• On
• Off
[Off]
Sets the NumLock function state when the computer
completes booting.
• On/Padlock Off
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for choosing the display.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Video Features
Item Specific Help
Display:
Compensation: [Enabled]
[Auto]]
Select display terminal.
* This setting is not
effective after
operating system
starts up.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 6. Video Features Submenu
Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Display:
• Internal Flat Panel
• External
[Auto]
Selects where the video signal will be routed.
• Auto
Compensation:
• Disabled
• Enabled
[Enabled]
Enables or disables video compensation.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configurations submenu allows the user to enable or disable IDE ports and Wireless LAN.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Internal Device Configurations
Item Specific Help
[Disabled]
No IDE ports are
enabled.
IDE Controller:
Modem Controller:
LAN Controller:
Wireless LAN:
[Both]
[Enabled]
[Enabled]
[Enabled]
[Primary]
Only primary IDE port
is enabled.
[Secondary]
Only secondary IDE port
is enabled.
[Both]
Both primary and
secondary IDE ports
are enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 7. Internal Device Configuration Submenu
Table 7: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
IDE Controller:
• Disabled
• Primary
• Secondary
• Both
[Both]
Enables or disables IDE controllers.
Modem
Controller:
• Disabled
• Enabled
[Enabled]
[Enabled]
[Enabled]
Enables or disables the modem.
LAN Controller:
Wireless LAN:
• Disabled
• Enabled
Enables or disables the LAN device.
Enables or disables the Wireless LAN device.
• Disabled
• Enabled
14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
CPU Features Submenu of the Advanced Menu
The CPU Features Submenu configures the system processor. Note that this submenu only appears in certain configura-
tions, based upon the system CPU.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
CPU Features
Item Specific Help
Select Enhanced
Intel(R) SpeedStep(R)
Technology enabled or
disabled.
SpeedStep(R) Technology:
On Battery:
[Enabled]
[Battery Optimized]
[Maximum Performance]
On AC:
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 8. CPU Features Submenu
Menu Field
Options
Default
Description
SpeedStep®
Technology:
• Disabled
• Enabled
[Enabled]
When Enabled is selected, CPU speed and battery use
can be selected from On Battery and On AC. When
Disabled is selected, SpeedStep Technology is dis-
abled.
On Battery:
• Maximum Performance
• Battery Optimized
• Automatic
[Battery
Optimized]
When Maximum Performance is selected, CPU speed
is maximized. When Battery Optimized is selected,
CPU power requirements are optimized for battery
operation. When Maximum Battery is selected, CPU
speed is optimized for battery operation. When Auto-
matic is selected, the CPU speed is determined by the
power source used.
On AC:
• Maximum Performance
• Battery Optimized
• Automatic
[Maximum
Performance]
When Maximum Performance is selected, CPU speed
is maximized. When Battery Optimized is selected,
CPU power requirements are optimized for battery
operation. When Maximum Battery is selected, CPU
speed is optimized for battery operation. When Auto-
matic is selected, the CPU speed is determined by the
power source used.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
USB Features Submenu of the Advanced Menu
The USB Features Submenu configures the system for use with a USB floppy drive.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
USB Features
Item Specific Help
Legacy USB Support:
SCSI SubClass Support:
[Enabled]
[Enabled]
[Disabled]
The feature is disabled.
[Enabled]
Legacy USB Emulation
is enabled, and USB
devices are available
without USB-aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 9. USB Features Submenu
Table 9: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Legacy USB
Support:
• Disabled
• Enabled
[Enabled]
When Enabled is selected, Legacy USB Emulation is
enabled and USB devices are available without a USB-
aware OS. When Disabled is selected, Legacy USB Emula-
tion is disabled.
SCSI SubClass
Support:
• Disabled
• Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the
SCSI subclass in the mass storage class (e.g., USB Memory
Key) are enabled. Note that enabling this feature may
cause the system to hang during POST, depending on the
device that is connected.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures the power button, wake-up feature, and volume setting.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Miscellaneous Configurations
Power Button:
Wake up on LAN:
Volume Setting:
[Disabled]
[Disabled]
[Middle]
Configures the power
button.
*ACPI OS ignores this
setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 10. Miscellaneous Configurations Submenu
Table 10: Fields, Options and Defaults for the Miscellaneous Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Power Button:
• Disabled
• Power Off
[Disabled]
When Disabled is selected, the power button does not control
power. When Power Off is selected, pressing the power but-
ton shuts off power to the system.
Wake up
on LAN:
• Disabled
• Enabled
[Disabled]
[Middle]
When [Enabled], the system wakes up when the internal LAN
device receives a Magic Packet while in Power-Off state.
Volume Setting:
• Off
Select the default volume level of the system speakers.
• Minimum
• Middle
• Maximum
17
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
Press <Enter> key to
view the contents of
the event log.
View Event Log:
[Enter]
Event Logging:
[Enabled]
System Boot Event:
[Disabled]
Clear All Event Logs:
Mark Events as Read:
[No]
[Enter]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 11. Event Logging Submenu
Table 11: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log Capacity:
Event Log Validity:
View Event Log:
Event Logging:
Space Available
Valid
Display only
Display only
• Enter
[Enter]
Allows you to view content of event log
Turns event logging on and off for all DMI events.
• Disabled
• Enabled
[Enabled]
System Boot Event:
Clear All Event Logs:
Mark Events as Read:
• Disabled
• Enabled
[Disabled]
[No]
Turns event logging on and off for DMI system boot
events.
• No
• Yes
When set to [Yes] all event logs will be cleared at next
boot.
• Enter
[Enter]
Allows you to make all events currently in the event log as
having been read.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. See Navigating through the Setup
Utility for more information.
n
Entering a password incorrectly 3 times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled]to be displayed.
If this happens restart the computer by
turning the power off and on with the
power switch and use the correct pass-
word on reboot.
The tables show the names of the menu fields for the
Security menu and its submenus, all of the options for
each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
n
If you make an error when re-entering
the password a warning will be displayed
on the screen. To try again press [Enter]
and retype the password. Press [Esc] to
abort the password setting process.
n
If Password On Resume is Enabled and
Password On Boot is Disabled you will
not have to type your password upon
resuming the system from the Suspend
or Save-to-Disk modes. Password On
Resume will work only if Password On
Boot is enabled.
If you set a password, write it down and
keep it in a safe place. If you forget the
password, you will have to contact your
support representative to regain access to
your secured functions and data.
n
Boot sector protection must be set to
[Normal] to install or upgrade an
operating system.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
Supervisor Password Is:
User Password Is:
Clear
Clear
Press [Enter] key to
set Supervisor Password
to enable any password
features.
Set Supervisor Password
Set User Password
Minimum User Password Length:
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
[Enter]
[Enter]
[0]
[Disabled]
[Disabled]
[Disabled]
[All]
Then password entry is
required to enter BIOS
Setup.
[Enabled]
Hard Disk Security
Owner Information
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 12. Security Menu
19
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Table 12: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
A display-only field. Set is displayed when the system supervisor password is
set and Clear when it is not.
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the general user
password is set and Clear when it is not.
User Password is:
–—
–—
Clear
Sets, changes or cancels the Supervisor Password. The Supervisor Password
may be up to seven characters and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
[Enter] instead of entering characters in the Enter New Password field and Re-
enter New Password fields. When a Supervisor Password is set it must be used
to access the BIOS setup utility.
Set Supervisor
Password
[Enter]
This field can only be accessed if Supervisor Password is set. This field sets,
changes, or cancels User Password. User Password may be up to seven char-
acters and must include only letters or numbers (no symbols). Passwords are
NOT case-sensitive. To cancel a password, press the Enter key instead of
entering characters in the Enter New Password field and in the Re-enter New
Password field. When a User Password is set it must be used to access the
BIOS setup utility.
Set User Password
–—
[Enter]
Sets the minimum length for the user password. Requires a supervisor pass-
word in order to be set.
Minimum User
Password Length:
–—
[0]
When set to Disabled, no password is required. When set to First Boot, a pass-
word (User or Supervisor) is required after the Power On Self Test (POST)
before the operating system will be read from a disk. If Every Boot is set, a
password (User or Supervisor) is required after the Power On Self Test (POST)
every time the system is booted (before the operating system is read from the
disk).
Password on Boot:
• Disabled
• First Boot
• Every Boot
[Disabled]
When set to Disabled, it is not necessary to enter a password to wake up from
LAN or Real Time Clock (RTC). When Enabled, it is still necessary to enter a
password after automatic wake-up.
On Automatic
Wake-up:
• Disabled
• Enabled
[Disabled]
[Disabled]
When set to Enabled, the PS/2 mouse and keyboard inputs are locked out
upon Resume from Suspend or Save to Disk mode until you enter the pass-
word. When set to Disabled no password is required. If no Supervisor Pass-
word is set, this feature is not available and no password is required.
KB Lock on
Resume:
• Disabled
• Enabled
If Supervisor Only is selected, only the supervisor can boot from removable
media. If All is selected, anyone can boot from removable media.
Boot from
Removable
Media:
• All
• Supervisor
only
[All]
When disabled, the BIOS Flash memory is write protected; when enabled, it is
not.
Flash Write:
• Disabled
• Enabled
[Enabled]
–—
Configures hard disk security features.
Sets Owner information.
Hard Disk
Security:
–—
Owner
–—
–—
Information:
20
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Hard Disk Security
Item Specific Help
Primary Master Password Is:
Secondary Master Password Is:
Clear
Not Available
Set Primary Master Password:
Set Secondary Master Password:
[Enter]
[Enter]
Password Entry on Boot:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 13. Hard Disk Security Submenu
Table 13: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Default
Description
Primary Master
Password Is:
___
Clear
Display-only. Default is Clear. When the Primary Master Password has been set,
the field changes to Set. When this password is set, the primary hard disk drive
cannot be used in another system unless the password is entered.
Secondary
Master
Password Is:
___
___
Not
Available
Display only.
Set Primary
Master
Password:
[Enter]
Sets, changes or cancels the Primary Master Password. The Primary Master
Password may be up to seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. When a Primary
Master Password is set, it must be used to access the primary hard drive if it is
used in another system. Note that the password will not take effect until the
system has been rebooted.
Set Secondary
Master
___
[Enter]
Not currently available.
Password:
Password Entry
on Boot:
• Disabled
• Enabled
[Enabled]
When disabled, it is not necessary to enter a Hard Disk Password before boot-
ing. The hard disk is still password-protected without entering a password.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information.
Note: This submenu can be modified only if a Supervisor’s Password has been set previously.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Owner Information
Item Specific Help
Owner Information Is:
Set Owner Information
Clear
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 14. Owner Information Submenu
Table 14: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
–—
Default
Clear
Description
Owner Information Is:
Set Owner Information:
Display only.
–—
[Enter]
Field to write owner
information (i.e., name).
Foreground Color:
Background Color:
• Black
• Blue
• Green
• Cyan
• Red
• Brown
• White
• Gray
• Light Blue
• Light Green
• Light Cyan
• Light Red
• Light
[Gray]
Select a color for the
foreground.
Magenta
• Yellow
• Bright White
• Magenta
• Black
• Blue
• Green
• Cyan
• Red
• Brown
• White
• Gray
• Light Blue
• Light Green
• Light Cyan
• Light Red
• Light
Magenta
• Yellow
[Black]
Select a color for the back-
ground.
• Bright White
• Magenta
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup Utility
to make any changes. See Navigating through the Setup
Utility for more information.
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, and the default settings. Also shown are a
description of the field's function and any special infor-
mation needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Quick Boot:
[Enabled]
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment:
Boot Device Priority
[Disabled]
[Enabled]
[Disabled]
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
F1 Help
ESC Exit
Select Item -/Space Change Values
Select Menu Enter
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 15. Boot Menu
Table 15: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
QuickBoot:
• Disabled
• Enabled
[Enabled]
When disabled, all diagnostic tests are performed when the
system is booted up. If [Enabled] is set, some of the tests are
skipped in order to speed up the booting process.
Boot-time
Diagnostic Screen:
• Disabled
• Enabled
[Disabled]
[Enabled]
Turns on and off display of test results instead of Fujitsu logo
screen during Power On Self Test.
Boot Menu:
• Disabled
• Enabled
This field is not active unless the Supervisor’s Password has
been set. When disabled, access to the Boot Menu with the
[F12] key is disabled. When enabled, the Boot Menu is
enabled and the [F12] key will allow you to display it.
Preboot Execution
Environment
• Disabled
• Enabled
[Disabled]
—
Turns on and off boot from network server options.
This menu allows setting up the source for bootup.
Boot Device
Priority
• Selects Boot Device
Priority submenu
23
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the order of checking of sources for the operating system.
PhoenixBIOS Setup Utility
Boot
Boot Device Priority
Item Specific Help
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 16. Boot Device Priority Submenu
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
The boot selections determine the order in which the BIOS searches for the operating system dur-
ing a startup sequence. To view all devices related to a source, press [Enter]; to view all devices
related to all sources, press [Ctrl] + [Enter]. To change the order, highlight one source by using the
[up] or [down] cursor keys and then press the [+] or [-] key or spacebar to change the order num-
ber for that source. [Shift] + [1] enables a device. Pressing [d] removes from the list a device that
is not installed. Be sure to save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
overwritten, depending upon your operating environment.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the Esc key to go to the Exit menu. If you wish to
move to another menu, use the cursor keys.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
I n f o M e n u
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screen that provides the
configuration information for your notebook.
The information, including CPU type and
The following table shows the names of the menu fields
for the Info menu and the information displayed in those
fields. These fields are for information purposes only, and
cannot be modified by the user.
speed, and total memory, displayed on this
screen varies according to the unit you
purchased.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
BIOS Version:
BIOS Date:
1.03
08/30/2004
BIOS Area:
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R) Pentium(R) M 745
1.80 GHz
64 KB
2048 KB
Total Memory:
512 MB
Onboard Memory: 512 MB DDR SDRAM
Memory Slot: None
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 17. Info Menu
Table 17: Fields, Options and Defaults for the Info Menu
Note that some of the parameters reflected below may be different from those on your screen, depending upon system
configuration.
Menu Field
BIOS Version:
BIOS Date:
BIOS Area:
CPU Type:
Default
Menu Field
Default
1.03
L1 Cache:
64 KB
08/30/2004
E000h – FFFFh
Intel(R) Pentium(R) M 745
1.80 GHz
L2 Cache:
2048 KB
Total Memory:
Onboard Memory
Memory Slot
512 MB
512 MB DDR SDRAM
None
CPU Speed:
25
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup Utility
to make any changes. See Navigating through the Setup
Utility for more information.
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Exit System Setup and
save your changes to
CMOS.
Save Changes
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 18. Exit Menu
Table 18: Fields, Options and Defaults for the Exit Menu
Keyboard
Menu Field
Description
Shortcut
Exit Saving
Changes
Press
F10key
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to
the BIOS memory and then exit the setup utility. A confirmation message Save Con-
figuration changes and exit now? [Yes] [No] will be displayed.
Exit Discard-
ing Changes
–—
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to
the BIOS memory. A setup warning message Configuration has not been
saved! Save before exiting? [Yes] [No]will be displayed when your settings
have changed. When the BIOS recognizes the Exit Discarding Changes selection it will
load the operating system and begin operation.
Load Setup
Defaults
Press
F9key
Selecting Load Setup Defaults will load the factory preset default values for all menu
fields, then display the message Load default configuration now? [Yes]
[No]. When confirmed the setup utility will return to the Exit Menu. To return to
another menu follow the directions in the Navigating Through the Setup Utility Section.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
E x i t M e n u
Table 18: Fields, Options and Defaults for the Exit Menu
Keyboard
Menu Field
Description
Shortcut
Discard
Changes
–—
Selecting Discard Changes will load the previous values in BIOS memory for all menu
fields. The message Load previous configuration now? [Yes] [No] will be
displayed. When confirmed the setup utility will return to the Exit menu. To return to
another menu, follow the directions in the Navigating Through the Setup Utility Section.
Save
Changes
–—
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS
memory. The message Save configuration changes now? [Yes] [No] will
be displayed. When confirmed, the setup utility will return to the Exit menu. To return to
another menu, follow the directions in the Navigating Through the Setup Utility section.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
|