Fujitsu LifeBook
P Series
BIOS Guide
LifeBook P Series Model:
P1510D
Document Date: 11/18/2005
Document Part Number: FPC58-1474-01
F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
MAIN MENU - SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for
Navigating through the Setup Utility to make any
changes.
the field’s function and any special information needed
to help understand the field’s use.
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the Date and
Time icon on your Windows Control Panel.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
System Time:
System Date:
[14:57:01]
[11/08/2005]
Adjust calendar clock.
Primary Master
Language:
[TOSHIBA MK2003GAH-(PM)]
[English (US)]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 1. Main Menu
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format of
hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits
for year. (MM/DD/YYYY) for example: 03/20/1998. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Menu Field
Options
Default
Description
Primary Master:
Selects Primary
Master submenu
–—
Displays the type of device on this Serial ATA/IDE interface, if there
is one. Pressing the Enter key selects the Primary Master submenu
allowing additional device configuration options for this interface.
Language:
• English (US)
• Japanese (JP)
[English
(US)]
The default setting differs between the US/European and the Japa-
nese model. Selects the display language for the BIOS.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Note: Actual hard drive label shown may vary. Depending
on the drive type, information such as cylinders, heads and
sectors may also be displayed.
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies which ATA
devices are installed.
PhoenixBIOS Setup Utility
Security Power Boot
Main
Advanced
Info
Exit
Item Specific Help
Primary Master [TOSHIBA MK2003GAH -(PM)]
Select Serial ATA/IDE
drive installed here.
Type:
[Auto]
LBA Format
Total Sectors:
Maximum Capacity:
39062520
20000MB
[Auto]
The BIOS auto-types the
drive on boot time.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
[None]
The drive is disabled.
Ultra DMA Mode:
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9
Setup Defaults
Enter
Select
Sub-Menu
F10 Save and Exit
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
n
Type:
Auto
None
[Auto]
Selects the Serial ATA/IDE device type. Select Auto to have the
type automatically identified by the BIOS at POST. If None is
selected, all of the following Set-up items do not appear.
n
LBA Format
Logical Block Addressing (LBA)
Total
Sectors:
---
---
---
---
The total number of sectors on your hard disk
Maximum
Capacity:
The maximum capacity of your hard disk
5
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
n
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
[16 Sectors]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Specifies the number of sec-
tors per block for multiple sector transfer.
n
n
n
n
n
n
LBA Mode
Control:
Disabled
Enabled
[Enabled]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Enables or disables Logical
Block Addressing in place of Cylinder, Head, Sector addressing.
n
n
n
n
n
n
n
Transfer Mode:
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Multiword
DMA 2]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Selects the method for mov-
ing data to/from the drive. Autotype the drive to select the optimum trans-
fer mode.
n
n
n
n
n
n
n
Ultra DMA
Mode:
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled]
The best option is selected by the BIOS automatically when Auto is
selected and cannot be selected by the user. Selects the method for mov-
ing data to/from the drive. Autotype the drive to select the optimum trans-
fer mode.
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu.
If you wish to move to another menu, use the cursor keys.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
ADVANCED MENU - SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:.
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
• Turn NumLock on or off.
• Select between the display panel and an external CRT
display.
• Enable or disable compensation for your display.
• Configure internal controllers.
• Configure CPU and USB features.
• Configure Miscellaneous features
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function and any special information
needed to help understand the field’s use.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
Keyboard/Mouse Features
Video Features
Configures keyboard
/mouse features.
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 3. Advanced Menu
Table 3: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
Keyboard/Mouse
Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting NumLock.
Video Features
When selected, opens the Video Features submenu, which allows setting of the display parame-
ters, including routing of video signals to different displays.
Internal Device
Configurations
When selected, opens the Internal Device Configurations submenu, which allows enabling or
disabling the IDE, LAN, and modem controllers.
CPU Features
When selected, opens the CPU Features submenu, which allows configuration of CPU
performance features.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Table 3: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
USB Features
When selected, opens the USB Features submenu, which allows enabling or disabling USB and
SCSI Subclass support.
Miscellaneous
Configurations
When selected, opens the Miscellaneous Configurations submenu, which allows you to change
the power button, Wake Up On LAN, and Volume settings.
Event Logging
When selected, opens the Event Logging submenu which lets you view and enable the event log.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the condition of the NumLock button.
.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Keyboard/Mouse Features
[Off]
Item Specific Help
[On] or [Off]
Numlock is On or Off.
Numlock:
[On/Padlock Off]
Numlock is On, but use
with [Fn] for 10-key
input.
* Windows XP preserves
Numlock state when the
user logs off.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 4. Keyboard/Mouse Features Submenu
Table 4: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Numlock:
• On
• Off
[Off]
Sets the NumLock function state when the computer
completes booting.
• On/Padlock Off
9
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Video Features
Item Specific Help
Display
Compensation:
[Auto]]
[Enabled]
Select display terminal.
*This setting is not
effective after
operating systems
starts up.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 5. Video Features Submenu
Table 5: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Display:
• Internal Flat Panel
• External
• Auto
[Auto]
Selects where the video signal will be routed. Note that
once the system boots up, the settings for the Windows
video driver take precedence over this setting.
Compensation:
• Disabled
• Enabled
[Enabled]
Enables or disables compensation which controls spacing
on the display. When enabled, displays with less than pixel
resolution 800 x 600 will still cover the entire screen.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configurations submenu allows the user to configure other internal devices.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Internal Device Configurations
[Disabled]
IDE port is disabled.
IDE Controller:
Modem Controller:
LAN Controller:
Wireless LAN:
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
IDE port is enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 6. Internal Device Configurations Submenu
Table 6: Fields, Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu
Menu Field
Options
Default
Description
IDE Controller:
• Disabled
• Enabled
[Enabled]
Enables or disables selected IDE devices.
Modem
Controller:
• Disabled
• Enabled
[Enabled]
[Enabled]
[Enabled]
Enables or disables the modem device.
Enables or disables LAN controller.
LAN Controller:
Wireless LAN:
• Disabled
• Enabled
• Disabled
• Enabled
Enables or disables the wireless LAN device.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
CPU Features Submenu of the Advanced Menu
The CPU Features submenu configures certain features of the CPU in the system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
CPU Features
Item Specific Help
SpeedStep(R) Technology:
On Battery:
On AC:
[Enabled]
[Battery Optimized]
[Maximum Performance]
Select Enhanced
Intel(R) SpeedStep(R)
Technology enabled or
disabled.
XD Bit functionality:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 7. CPU Features Submenu
Table 7: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
n
SpeedStep(R)
Technology:
Disabled
Enabled
[Enabled]
Enables or disables SpeedStep(R) Technology.
n
n
On Battery:
Maximum
Performance
Battery Optimized
Automatic
[Battery
Optimized]
Allows the user to select the power conditions when the
system is running on battery power.
n
n
n
On AC:
Maximum
[Maximum
Performance]
Allows the user to select the power conditions when the
system is running on AC power.
Performance
n
n
Battery Optimized
Automatic
n
n
XD Bit
functionality:
Disabled
Enabled
[Enabled]
Allows the user to enable and disable the Execute Disable Bit
functionality. Execute Disable Bit allows the processor to
classify areas in memory where application code can and
cannot execute. In the event an internet worm attempts to
insert code in the buffer, the processor disables code
execution to prevent damage or worm propagation.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
USB Features Submenu of the Advanced Menu
The USB Features submenu configures the USB capabilities of the system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
USB Features
Item Specific Help
Legacy USB Support:
SCSI SubClass Support:
[Enabled]
[Disabled]
The feature is disabled.
[Enabled]
[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 8. USB Features Submenu
Table 8: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
n
Legacy USB
Support:
Disabled
Enabled
[Enabled]
When Disabled is selected, legacy USB emulation is dis-
abled. When Enabled is selected, legacy USB emulation is
enabled and USB devices are available without USB-aware
OS.
n
n
n
SCSI SubClass
Support:
Disabled
Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the
SCSI subclass in the mass storage class (e.g., USB Memory
Key) are enabled. Note that enabling this feature may
cause the system to hang during POST, depending on the
device that is connected.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Miscellaneous Configurations Submenu of the Advanced Menu
The CPU Features submenu configures certain features of the CPU in the system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Miscellaneous Configurations
Item Specific Help
Power Button:
[Disabled]
[Disabled]
[Off]
[Middle]
[Enabled]
[Normal]
Configures the power
button.
Wake up on LAN:
Auto Save To Disk:
Volume Setting:
PCI Clock Run:
FAN Control:
*ACPI OS ignores this
setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 9. Miscellaneous Configurations Submenu
Table 9: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
Power Button:
• Disabled
• Power Off
[Disabled]
When Disabled is selected, pressing the power button does
not affect power. When Enabled is selected, pressing the
button powers off the system.
Wake up
on LAN:
• Disabled
• Enabled
[Disabled]
[Off]
When Enabled is selected, the system will wake up when
the internal LAN receives a Magic Packet while it is
powered off.
Auto Save
To Disk:
• Off
• On
When this is enabled, when the system reaches a low bat-
tery state while it is in suspend mode, it will save to disk
and then power off.
Volume Setting:
• Off
[Middle]
Allows you to set or disable the system volume level.
• Minimum
• Middle
• Maximum
14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 9: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
PCI Clock Run:
• Disabled
• Enabled
[Enabled]
This allows you to enable or disable the running of the
Peripheral Component Interconnect (PCI) clock.
FAN Control:
• Normal
• Silent
[Normal]
When set to [Silent], the fan comes on less frequently than
when set to [Normal].
15
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Event Logging Submenu of the Advanced Menu
The Event Logging submenu is for setting up the logs for DMI event logging.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
Press <Enter> key to
view the contents of
the event log.
View Event Log:
[Enter]
Event Logging:
[Enabled]
System Boot Event:
[Disabled]
Clear All Event Logs:
Mark Events as Read:
[No]
[Enter]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 10. Event Logging Submenu
Table 10: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log Capacity:
Space
Display only
Available
Event Log Validity:
View Event Log:
Event Logging:
Valid
Display only
• Enter
[Enter]
[Enabled]
Allows you to view content of event log.
Turns event logging on and off for all DMI events.
• Disabled
• Enabled
System Boot Event:
Clear All Event Logs:
Mark Events as Read:
• Disabled
• Enabled
[Disabled]
[No]
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.
Allows you to mark events currently in the event log as read.
• No
• Yes
• Enter
[Enter]
16
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
SECURITY MENU - SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow
the instructions for Navigating Through the Setup Utility
to make any changes.
• If you make an error when re-entering
the password a [Warning] will be
displayed on the screen. To try again,
press the Enter key and then retype the
password. Press the Esc key to abort the
password setting process.
• Entering a password incorrectly three
times in a row will cause the keyboard
and mouse to be locked out and the
warning [System Disabled] to be
displayed. If this happens, restart the
computer by turning off and on the
power with the power switch and use
the correct password on reboot.
• If the Password on Resume is Enabled
and the Password on Boot is Disabled
you will not have to type your password
upon resuming the system from the
Suspend or Save-to-Disk modes. Power
Management Security will work only if
Password on Boot is enabled.
The following tables show the names of the menu fields
for the Security menu and its submenus, all the options
for each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access to
your secured functions and data.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Supervisor Password Is:
User Password Is:
Clear
Clear
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Set Supervisor Password
Set User Password
Minimum User Password Length
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
[Enter]
[Enter]
[0]
[Disabled]
[Disabled]
[Disabled]
[All]
Then password entry is
required to enter BIOS
Setup.
[Enabled]
Hard Disk Security
Owner Information
Security Chip Setting
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 11. Security Menu
17
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Table 11: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system supervisor
password is set and Clear when it is not.
User Password is:
–—
–—
Clear
A display-only field. Set is displayed when the general user password is
set, and Clear when it is not.
Set Supervisor
Password
[Enter]
Sets, changes or cancels the Supervisor Password. Supervisor Password
may be up to seven characters long and must include only letters or num-
bers (no symbols). Passwords are NOT case-sensitive. To cancel a pass-
word press the Enter key instead of entering characters in the Enter New
Password field and in the Re-enter New Password field. When a Supervi-
sor Password is set it must be used to access the BIOS setup utility.
Set User Password
–—
–—
[Enter]
Can only be accessed if Supervisor Password is set. Sets, changes or
cancels User Password, which may be up to seven characters long and
must include only letters or numbers (no symbols). Passwords are NOT
case-sensitive. To cancel a password press [Enter] key instead of entering
characters in the Enter New Password and Re-enter New Password fields.
When a User Password is set it must be used to access the BIOS utility.
Minimum User
[0]
Can only be accessed if Supervisor Password is set. Set the minimum
Password Length:
length for User Password.
Password on Boot:
• Disabled
• First Boot
• Every Boot
[Disabled]
When Disabled, no password is required. When set to First Boot, pass-
word entry required only before first boot. When Every Boot is selected,
password required whenever the system is booted.
[Disabled]
On Automatic
Wake up:
• Disabled
• Enabled
When Disabled, a password is not required on LAN or RTC automatic
wake up. When Enabled, password is required on automatic wake up.
KB Lock on Resume:
• Disabled
• Enabled
[Disabled]
[All]
When Enabled, PS/2 keyboard or mouse inputs are locked out at Resume
From Suspend or Save-to-Disk until entering password.
Boot from
Removable Media:
• All
• Supervisor
only
When Supervisor Only is selected, only the Supervisor can boot from
removable media. Only the user who enters the Supervisor Password
before OS boot is treated as the Supervisor. When All is selected, boot
from removable media is not restricted.
Flash Write:
• Disabled
• Enabled
[Enabled]
–—
When disabled, the BIOS Flash Memory is write-protected; when
enabled, it is not.
Hard Disk Security:
Owner Information
Security Chip Setting
–—
–—
___
When selected, opens the Hard Disk Security submenu, which allows you
to configure hard disk security features.
–—
When selected, opens the Owner Information submenu, which allows
you to set Owner information.
___
When selected, opens the Security Chip Settings submenu, which allows
you to set settings for the security chip.
Exiting from the Security Menu
When you finish setting the parameters on the Security Menu, you can either exit from setup utility or move to another
menu. To exit from setup utility, press [Esc] key to go to Exit Menu. To move to another menu, use the cursor keys.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Hard Disk Security
Item Specific Help
Primary Master Password Is:
Set Primary Master Password:
Password Entry on Boot:
Clear
[Enter]
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 12. Hard Disk Security Submenu
Table 12: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Default
Description
Primary Master
Password Is:
Clear
A display-only field. Set is displayed when the Master Password is set and Clear when
it is not.
Set Primary
Master
Password
[Enter]
Sets, changes or cancels Primary Master Password. The Primary Master Password
may be up to seven characters long and include only letters or numbers (no symbols).
Passwords are NOT case- sensitive. To cancel a password press the Enter key instead
of entering characters in the Enter New Password field and in the Re-enter New Pass-
word field. When a Primary Master Password is set it must be used to access the hard
disk. Data on the hard disk cannot be read on other systems.
Password Entry
on Boot:
[Enabled]
When set to Disabled, it is not necessary to enter a Hard Disk Password before
booting the OS. The hard disk is still password-protected without password entry.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Owner Information Submenu of the Security Menu
The Owner Information submenu is for setting owner information.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Item Specific Help
Owner Information
Owner Information Is:
Set Owner Information
Clear
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 13. Owner Information Submenu
Table 13: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
Owner Information Is:
–—
Clear
Display only. (Will only be
displayed if the Supervisor
Password is set).
Set Owner
Information:
–—
[Enter]
[Gray]
Field to write owner
information, i.e. name.
Foreground Color:
• Black
• Blue
• Brown
• White
• Light Cyan
• Light Red
• Green
• Cyan
• Red
• Gray
• Light Blue
• Light Green
• Light Magenta
• Yellow
• Bright White
• Magenta
Background Color:
• Black
• Blue
• Brown
• White
• Light Cyan
• Light Red
[Black]
• Green
• Cyan
• Red
• Gray
• Light Blue
• Light Green
• Light Magenta
• Yellow
• Bright White
• Magenta
20
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting Security submenu is for configuring security chip features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Hard Disk Security
Item Specific Help
Select Security Chip
enabled or disabled.
Security Chip:
Clear Security Chip
[Enabled]
[Enter]
* A reboot is required
after exit to configure
Security Chip correctly.
Clear Security Chip
becomes selectable
after the reboot.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 14. Table 16: Security Chip Setting Submenu
Table 16: Fields, Options, and Defaults for the Security Chip Setting Submenu of the Security Menu
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.
Menu Field
Options
Default
Description
Security Chip:
[Disabled]
Allows you to enable or disable the Security Chip. When disabled,
the following field does not appear.
• Disabled
• Enabled
Clear Security Chip
____
[Enter]
Allows you to clear the security chip. Note that if you clear the
security chip, you will not be able to access data that has already
been encrypted.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
BOOT MENU - SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the
instructions for Navigating Through the Setup Utility to make any changes. The tables show the names of the menu
fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the
field's function and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Item Specific Help
Quick Boot:
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment
Boot Device Priority
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
F1 Help
ESC Exit
Select Item -/Space Change Values
Select Menu
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 15. Boot Menu
Table 15: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
QuickBoot:
• Disabled
• Enabled
[Enabled]
Turns on and off booting with a truncated set of Power
On Self Test. (Fewer tests mean faster turn on.)
Boot-time Diagnostic
Screen:
• Disabled
• Enabled
[Disabled]
[Enabled]
Turns on and off display of test results instead of Fujitsu
logo screen during Power On Self Test.
Boot Menu:
• Disabled
• Enabled
This field is not active unless the Supervisor’s Password has
been set. When disabled, access to the Boot Menu with the
[F12] key is disabled. When enabled, the Boot Menu is
enabled and the [F12] key will allow you to display it.
Preboot Execution
Environment
• Disabled
• Enabled
[Disabled]
—
Turns off and on the preboot execution environment
feature.
Boot Device Priority
• Selects Boot
Device Priority
submenu
This menu allows setting up the source for the operating
system.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
Keys used to view or
configure devices:
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 16. Boot Device Priority Submenu
Table 16: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
The boot selections determine the order in which the BIOS searches for the operating
system during a startup sequence. To change the order highlight one source by using
the [up] or [down] cursor keys and then press the [+] or [-] key to change the order
number for that source. Be sure to save your changed order when you exit the BIOS
setup utility.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish to
move to another menu, use the cursor keys.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display-only screen that provides the
configuration information for your notebook.
The information displayed on this screen is
variable according to the unit you
purchased.
The following table shows the names of the menu fields
for the Info menu and the information displayed in those
fields. These fields are for information purposes only, and
are not editable.
PhoenixBIOS Setup Utility
Security Power Savings
Main
Advanced
Boot
Info
BIOS Version:
BIOS Date:
BIOS Area:
1.08
10/11/2005
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R) Pentium(R) M processor Ultra Low Voltage 753
1.20 GHz
64 KB
2048 KB
Total Memory:
Memory Slot:
256 MB
256 MB DDR2 SDRAM
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 17. Info Menu
Table 17: Fields, Options and Defaults for None
Menu Field
BIOS Version:
BIOS Date:
BIOS Area:
Default
Menu Field
L1 Cache:
Default
1.xx
64 KB
mm/dd/yyyy
L2 Cache:
2048 KB
E000h – FFFFh
Total Memory:
Memory Slot:
256 MB
CPU Type:
Intel(R) Pentium(R) M processor
Ultra Low Voltage 753
256 MB DDR2 SDRAM
CPU Speed:
1.20 GHz
24
Download from Www.Somanuals.com. All Manuals Search And Download.
E x i t M e n u
EXIT MENU - LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating through the Setup Utility to
make any changes. The table shows the names of the menu fields for the Exit menu and a description of the field's func-
tion and any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Exit System Setup and
save your changes to
CMOS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 18. Exit Menu
Table 18: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and then
exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility immediately without writing to the BIOS memory
and without displaying a confirmation screen. When the BIOS recognizes this selection it will load the operating system
and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit Menu. To return to
Discard
Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load previ-
ous configuration now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To
return to another menu, follow the directions in the Navigating through the Setup Utility section.
Save Changes
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to the Exit
menu. To return to another menu, follow the directions in the Navigating through the Setup Utility section.
Save Changes
and Power Off
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory, then
power the system off. The message Save configuration changes now and power off? [Yes] [No]
will be displayed. When confirmed, the setup utility shut down the system.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|