Fujitsu LifeBook
N Series
BIOS Guide
LifeBook N Series Models:
N6110
Document Date: 10/21/2005
Document Part Number: FPC58-1431-01
F U J I T S U C O M P U T E R S Y S T E M S
1
Download from Www.Somanuals.com. All Manuals Search And Download.
B I O S S e t u p U t i l i t y
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for Navi-
gating Through The Setup Utility to make any changes.
(See Navigating Through The Setup Utility on page 2 for
more information.)
the field’s function and any special information needed
to help understand the field’s use.
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the calendar
and time icon on your Windows Control
panel or type time or date from the MS-
DOS prompt.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
System Time:
System Date:
[14:57:01]
[10/21/2005]
Adjust calendar clock.
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Primary Master
Primary Slave
Serial ATA Port 0
[FUJITSU MHV2100AT-(PM)]
[HL-DT-ST DVDRAM GMA-4080N-(P]
[None]
Language:
[English (US)]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/
or [Shift] + [Tab] keys.
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits
for year. (MM/DD/YYYY) for example: 03/20/1998. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 1: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field
Options
Default
Description
Primary Master:
The product number of
the hard drive.
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Primary Master submenu
allowing additional device configuration options for this inter-
face.
Selects Primary
Master submenu
Primary Slave
Serial ATA Port 0
Language:
The product number of
the CD-ROM drive.
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Primary Slave submenu
allowing additional device configuration options for this interface
Selects Primary
Slave submenu
[None]
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Serial ATA Port 0 submenu
allowing additional device configuration options for this interface
Selects Serial ATA
Port 0 submenu
■
English (US)
Japanese (JP)
[English (US)]
The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS. (Note
that this field may appear blank until the first time it is selected.)
■
5
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA devices are installed.
PhoenixBIOS Setup Utility
Main
Primary Master [FUJITSU MHV2100AT-(PM)]
Item Specific Help
Select Serial ATA/ATAPI
drive installed here.
Type:
[Auto]]
LBA Format
Total Sectors:
Maximum Capacity:
195371568
100GB
[Auto]
The BIOS auto-types the
drive on boot time.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
[None]
The drive is disabled.
Ultra DMA Mode:
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 2. Primary Master Submenu
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
■
Type:
Auto
None
[Auto]
Automatically selects the ATA/ATAPI device type. To change the
selection, press the spacebar. Select Auto to have the type automat-
ically identified by the BIOS at POST. Select None if you don’t want
to select a primary master.
■
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
---
---
Maximum
Capacity:
The maximum capacity of your hard disk
■
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
[16 Sectors]
This option is automatically selected when Auto is selected.
■
■
■
■
16 Sectors
■
LBA Mode Control:
Disabled
Enabled
[Enabled]
Indicates whether Logical Block Addressing is enabled or disabled.
This option cannot be changed when Auto is selected.
■
6
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
■
Transfer Mode:
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
FPIO 3 / DMA 1
FPIO 4 / DMA 2
[Multiword
DMA 2]
Indicates the method for moving data to/from the drive. This option
cannot be changed when Auto is selected.
■
■
■
■
■
■
■
Ultra DMA Mode:
Disabled
Mode 0
[Disabled]
Selects the method for moving data to/from the drive. This option
cannot be changed when Auto is selected. (Note that when the
defaults are reset by pressing the [F9] button, [Disabled is displayed,
but it reverts to [Mode 5] after the system is rebooted).
■
■
■
■
■
■
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
7
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Primary Slave Submenu of the Main Menu
The Primary Slave submenu allows you to configure secondary ATA devices.
PhoenixBIOS Setup Utility
Main
Primary Slave [HL-DT-ST DVDRAM GMA-4080N-(PS)]
Item Specific Help
Type:
[Auto]
Select Serial ATA/ATAPI
drive installed here.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[Disabled]
[Disabled]
[Multiword DMA 2]
[Mode 2]
[Auto]
The BIOS auto-types the
drive on boot time.
Ultra DMA Mode:
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 3. Primary Slave Submenu
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Default
Description
■
Type:
Auto
None
CD-ROM
Hard Disk
[Auto]
NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to cycle through the selections.
■
■
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM,
SuperDisk or Hard Disk for appropriate drive type installed at
this connection.
■
CHS Format
Cylinders/Heads/Sectors
■
■
■
Cylinders:
A number between
0 and 65,535
–—
–—
–—
This item appears only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
Heads:
A number between
1 and 16
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Sectors:
A number between
0 and 63
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 3: Fields, Options and Defaults for the Primary Slave Submenu of the Main Menu
Menu Field
Options
Default
Description
■
Maximum
Capacity:
Display only
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk, or User is selected.
■
■
■
■
■
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
[Disabled]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
■
■
LBA Mode
Control:
Disabled
Enabled
[Disabled]
Enables or disables Logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
■
■
■
■
■
■
■
Transfer Mode:
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Multiword DMA2]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected. Multiword DMA is automatically set
to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to mode 2
for Fast PIO 4 / DMA. (Note that when the defaults are reset by
pressing the [F9] button, [Disabled is displayed, but it reverts to
[Multiword DMA 2] after the system is rebooted).
■
■
■
■
■
■
■
Ultra DMA
Mode:
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected. (Note that when the defaults are
reset by pressing the [F9] button, [Disabled is displayed, but it
reverts to [Mode 2] after the system is rebooted).
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
---
---
Maximum
Capacity:
The maximum capacity of your hard disk
9
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Serial ATA Port 0 Submenu of the Main Menu
The Serial ATA Port 0 submenu indicates whether serial ATA Port 0 devices are auto-typed at boot time.
PhoenixBIOS Setup Utility
Main
Item Specific Help
Serial ATA Port 0 [None]
Select Serial ATA/ATAPI
drive installed here.
Type: [Auto]
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 4. Serial ATA Port 0 Submenu
Table 4: Fields, Options and Defaults for the Serial ATA Port 0 Submenu of the Main Menu
Menu Field
Options
Default
Description
■
Type:
Auto
None
[Auto]
Automatically selects the ATA/ATAPI device type. When Auto is
selected, the device type is automatically identified by the BIOS at
POST. Select None if you don’t want to select a device.
■
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu. If you wish to move to another menu, use the cursor keys.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
(See Navigating Through The Setup Utility on page 2 for
more information.)
■
Set the keyboard and mouse features.
Select between the display panel and an external
■
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function and any special information
needed to help understand the field’s use.
CRT display or video projector.
Enable or disable compensation for your display.
Enables or disables the internal controllers.
Configure CPU and USB features in your system.
■
■
■
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
Keyboard Features
Video Features
Configures keyboard/
mouse features.
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 5. Advanced Menu
Table 5: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
Keyboard Features
Video Features
When selected, opens the Keyboard Features submenu, which allows turning NumLock on and off.
When selected, opens the Video Features submenu, which allows setting of the display parameters, including
routing of video signals to different displays.
Internal Device
Configurations
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the Serial
ATA, IDE, and LAN Controllers.
CPU Features
When selected, opens the CPU Features submenu to allow you to enable or disable the SpeedStep® Technology
feature and XD Bit functionality.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Table 5: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
USB Features
When selected, opens the USB Features submenu to allow you to enable or disable the legacy support and SCSI
SubClass support (e.g., floppy disk drive, external optical drive).
Miscellaneous
Configurations
When selected, opens the Miscellaneous Configurations submenu to allow you to enable or disable the power
button and the Wake Up On LAN or USB features, and to set the Volume Setting.
Event Logging
When selected, opens the event logging submenu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Keyboard Features Submenu of the Advanced Menu
The Keyboard Features submenu is for enabling or disabling the NumLock feature.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Keyboard Features
[Off]
Item Specific Help
Numlock:
Select power-on state
for Numlock.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 6. Keyboard Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Numlock:
On
Off
[Off]
Sets the NumLock function state when the computer completes
booting.
■
13
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Video Features
Item Specific Help
Display:
[Auto]
Select display terminal.
Compensation:
[Enabled]
* This setting is not
effective after
operating system
starts up.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 7. Video Features Submenu
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Display:
Internal Flat Panel
External
Auto
[Auto]
Selects where the video signal will be routed.
Note: The Windows video driver overrides this setting.
■
■
■
■
Compensation:
Disabled
Enabled
[Enabled]
Enables or disables compensation which controls spacing on the
display. When enabled, displays with less than pixel resolution
1024 x 768 or 800 x 600 will still cover the entire screen. A resolu-
tion below 800 x 600 will fill the screen, but due to the low resolu-
tion, will appear blocky and may not be acceptable.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to configure other internal devices.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Internal Devices Configurations
Item Specific Help
[Disabled]
Serial ATA port is
disabled.
Serial ATA Controller:
IDE Controller:
LAN Controller:
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Serial ATA port is
enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Serial ATA
Controller:
Disabled
Enabled
[Enabled]
Enables or disables the Serial ATA port.
■
■
IDE Controller:
LAN Controller:
Disabled
Enabled
[Enabled]
[Enabled]
Enables or disables selected IDE devices.
Enables or disables the LAN controller.
■
■
Disabled
Enabled
■
15
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
CPU Features Submenu of the Advanced Menu
The CPU Features Submenu provides options for enabling or disabling the SpeedStep® Technology feature.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
CPU Features
Item Specific Help
Select Enhanced
SpeedStep(R) Technology:
On Battery:
[Enabled]
[Battery Optimized]
[Maximum Performance]
Intel(R) SpeedStep(R)
Technology enabled or
disabled.
On AC:
XD Bit functionality:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 9. CPU Features Submenu
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
SpeedStep®
Technology:
• Disabled
• Enabled
[Enabled]
When Enabled is selected, CPU speed and battery use can
be selected from On Battery and On AC. When Disabled is
selected, SpeedStep Technology is disabled.
On Battery: • Maximum
Performance
[Battery
Optimized]
When Maximum Performance is selected, CPU speed is
maximized. When Battery Optimized is selected, CPU power
requirements are optimized for battery operation. When
Automatic is selected, the CPU speed is determined by the
power source used.
• Battery Optimized
• Automatic
On AC:
• Maximum
Performance
• Battery Optimized
• Automatic
[Maximum
Performance]
When Maximum Performance is selected, CPU speed is
maximized. When Battery Optimized is selected, CPU power
requirements are optimized for battery operation. When
Automatic is selected, the CPU speed is determined by the
power source used.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
XD Bit
functionality:
Disabled
Enabled
[Enabled]
Allows the user to enable and disable the Execute Disable Bit
functionality. Execute Disable Bit allows the processor to
classify areas in memory where application code can and
cannot execute. In the event an internet worm attempts to
insert code in the buffer, the processor disables code
execution to prevent damage or worm propagation.
■
17
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
USB Features Submenu of the Advanced Menu
The USB Features Submenu provides options for enabling or disabling legacy USB support.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
USB Features
Item Specific Help
[Disabled]
The feature is disabled.
[Enabled]
[Enabled]
Legacy USB Support:
SCSI SubClass Support:
[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 10. USB Features Submenu
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Legacy USB Support:
Disabled
Enabled
[Enabled]
When Enabled is selected, Legacy USB Emulation is enabled
and the USB devices are available without a USB-aware OS.
When Disabled is selected, Legacy USB support is disabled.
■
■
■
SCSI SubClass Support:
Disabled
Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the
SCSI subclass in the mass storage class (e.g., USB Memory
Key) are enabled. Note that enabling this feature may cause
the system to hang during POST, depending on the device
that is connected.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu provides options for enabling or disabling the power button, the Wake
Up On LAN feature, and the Wake Up On USB feature, and for enabling or disabling the system beep.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Miscellaneous Configurations
Item Specific Help
Configures the power
button.
[Disabled]
[Disabled]
[Disabled]
[Middle]
Power Button:
Wake up on LAN:
Wake up on USB:
Volume Setting:
*ACPI OS ignores this
setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu of the Advanced
Menu
Menu Field
Options
Default
Description
■
Power Button:
Disabled
Power Off
[Disabled]
Selecting Disabled disables the power button. Selecting Power Off
allows you to turn off system power with the power button.
■
■
Wake up on LAN:
Disabled
Enabled
[Disabled]
Selecting Enabled allows the system to wake up when the internal
LAN device receives a specific signal while in power-off state.
Selecting Disabled disables this feature.
■
■
Wake up on USB:
Volume Setting:
Disabled
Enabled
[Disabled]
[Middle]
Selecting Enabled allows a USB device to wake up the system when it
is in Standby mode. Selecting Disabled disables this feature.
■
■
Off
Minimum
Middle
Maximum
Allows you to set or disable the system volume level.
Note that once the operating system initializes, the volume settings
will be determined by the OS volume settings.
■
■
■
19
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
Press <Enter> key to
view the contents of
the event log.
View Event Log:
[Enter]
Event Logging:
[Enabled]
System Boot Event:
[Disabled]
Clear All Event Logs:
Mark Events as Read:
[No]
[Enter]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 12. Event Logging Submenu
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Space Available
Valid
Description
Event Log Capacity:
Event Log Validity:
View Event Log:
Event Logging:
Display only
Display only
■
Enter
[Enter]
Allows you to view content of event log
Turns event logging on and off for all DMI events.
■
Disabled
Enabled
[Enabled]
■
■
System Boot Event:
Disabled
Enabled
[Disabled]
[No]
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.
■
■
Clear All Event
Logs:
No
Yes
■
■
Mark Events as
Read:
Enter
[Enter]
Allows you to mark all events currently in the event log as having
been read.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current security configuration. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
■
If you make an error when re-entering
the password a [Warning] will be dis-
played on the screen. To try again press
the Enter key and then retype the pass-
word. Press the Esc key to abort the
password setting process.
■
Entering a password incorrectly 3 times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled]to be displayed
and a constant tone will be emitted. If
this happens, restart the computer by
turning off and on the power with the
power switch and use the correct pass-
word on reboot.
The following tables show the names of the menu fields
for the Security menu and its submenus, all of the
options for each field, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
The default condition is no passwords required and no
write protection.
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access to
your secured functions and data.
■
If the Power Management Security is
Enabled and the Password on Boot is
Disabled you will not have to type your
password upon resuming the system
from the Suspend or Save-to-Disk
modes. Power Management Security
will work only if Password boot is
enabled.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Supervisor Password Is:
User Password Is:
Clear
Clear
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Set Supervisor Password
Set User Password
Minimum User Password Length: [0]
[Enter]
[Enter]
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
[Disabled]
Then password entry is
required to enter BIOS
Setup.
[Disabled]
[Disabled]
[All]
[Enabled]
Hard Disk Security
Owner Information
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 13. Security Menu
21
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system supervisor password
is set and Clear when it is not.
User Password is:
–—
–—
Clear
A display-only field. Set is displayed when the general user
password is set, and Clear when it is not.
Set Supervisor
Password
[Enter]
Sets, changes or cancels the Supervisor Password. Supervisor’s Password
may be up to seven characters long and must include only letters or num-
bers (no symbols). Passwords are NOT case- sensitive. To cancel a pass-
word press the Enter key instead of entering characters in the Enter New
Password field and in the Re-enter New Password field. When a Supervi-
sor Password is set it must be used to access the BIOS setup utility.
Set User Password
–—
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up to
seven characters long and must include only letters or
numbers (no symbols). Passwords are NOT case-sensitive. To cancel a
password press the Enter key instead of entering characters in the Enter
New Password field and in the Re-enter New Password field. When a
User Password is set it must be used to access the BIOS setup utility.
Minimum User
Password Length:
–—
[0]
Supervisor can set password length (0 to 8) for user password. User can-
not set a password shorter than the minimum length.
■
Password on Boot:
Disabled
First Boot
Every Boot
[Disabled]
When set to First Boot, a password (User or Supervisor) is required just
once after the Power On Self Test (POST) before the operating system
will be read from a disk. When set to Every Boot, a password (User or
Supervisor) is required every time after the Power On Self Test (POST)
before the operating system will be read from a disk. When set to Dis-
abled no password is required.
■
■
■
■
On Automatic
Wake up:
Disabled
Enabled
When set to Disabled, it is not necessary to enter a password to wake up
from LAN or Real Time Clock (RTC). When Enabled, it is still necessary to
enter a password after automatic wake-up.
[Disabled]
[Disabled]
■
■
KB Lock on
Resume:
Disabled
Enabled
When set to Enabled, the PS/2 mouse and keyboard inputs are locked out
upon Resume from Suspend or Save to Disk mode until you enter the
password. When set to Disabled no password is required. If no Supervisor
Password is set, this feature is not available and no password is required.
■
■
Boot from
Removable Media:
All
[All]
When All is selected, booting from removable media is not restricted.
When Supervisor Only is selected, only the Supervisor (i.e., the user who
enters Supervisor password), can boot from removable media.
Supervisor only
■
■
Flash Write:
Disabled
Enabled
[Enabled]
When set to [Disabled], the BIOS Flash memory is write protected.
Hard Disk Security:
–—
–—
–—
–—
Configures hard disk security features
Sets Owner information.
Owner
Information:
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the Esc key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Hard Disk Security
Item Specific Help
Primary Master Password Is:
Clear
Serial ATA Port 0 Password Is:
Not Available
Set Primary Master Password:
[Enter]
Set Serial ATA Port 0 Password: [Enter]
Password Entry on Boot:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Default
Description
Primary Master
Password Is:
Clear
The default is Clear. When the Master Password has been set in the field below, the
field changes to Set.
---
Serial ATA Port 0
Password Is:
---
Not
Available
A display-only field. Set is displayed when the Serial ATA Port 0 Password is set and
Not Available when it is not.
Set Primary
Master Password:
[Enter]
When the Supervisor Password has been set, the field can be changed. When
enabled, the hard disk is locked with the password. Data in the locked disk cannot
be read on any systems other than the original system on which it is locked or sys-
tems that have the identical password setting.
---
Set Serial ATA Port
0 Password
---
[Enter]
Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to
seven characters long and include only letters or numbers (no symbols). Passwords
are NOT case- sensitive. To cancel a password press the Enter key instead of enter-
ing characters in the Enter New Password field and in the Re-enter New Password
field. When a Serial ATA Port 0 Password is set it must be used to access the hard
disk. Data on the hard disk cannot be read on other systems.
■
Password Entry
on Boot:
Disabled
Enabled
[Enabled]
When disabled, the master password entry is not required before booting the oper-
ating system, but the hard disk is still password-protected without password entry.
■
23
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that the owner information and foreground
and background colors cannot be set without having entered a Supervisor password.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Owner Information
Item Specific Help
Owner Information Is:
Set Owner Information
Clear
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
–—
Default Description
Owner Information Is:
Set Owner Information:
Clear
Display only.
–—
[Enter]
Field to write owner
information, (i.e., name).
■
■
■
■
■
■
■
■
■
■
■
Foreground Color:
Background Color:
Black
Blue
Green
Cyan
Red
Magenta
Brown
White
Gray
Light Blue
Light Green
Light Cyan
Light Red
Light Magenta
Yellow
[Gray]
[Black]
Set foreground color.
■
■
■
■
Bright White
■
■
■
■
■
■
■
■
■
■
■
■
Black
Blue
Green
Cyan
Red
Magenta
Brown
White
Gray
Light Blue
Light Green
Light Cyan
Light Red
Light Magenta
Yellow
Set background color.
■
■
■
■
Bright White
■
24
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Item Specific Help
[Enabled]
Quick Boot:
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment:
Boot Device Priority
[Disabled]
[Enabled]
[Disabled]
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
F1 Help
ESC Exit
Select Item -/Space Change Values
Select Menu Enter
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 16. Boot Menu
Table 16: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
■
QuickBoot:
Disabled
Enabled
[Enabled]
Turns on and off booting with a truncated set of Power On Self Test.
(Fewer tests mean faster turn on.)
■
■
Boot-time
Diagnostic Screen:
Disabled
Enabled
[Disabled]
[Enabled]
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
■
■
Disabled
Enabled
Boot Menu:
This field is not active unless the Supervisor’s Password has
been set. When disabled, access to the Boot Menu with the
[F12] key is disabled. When enabled, the Boot Menu is enabled
and the [F12] key will allow you to display it.
■
■
Preboot Execution
Environment:
Disabled
Enabled
[Disabled]
—
Turns on and off the preboot execution environment feature.
■
Boot Device
Priority
—
This menu allows setting up the source for the operating system.
See “The Boot Device Priority Submenu” in the following section.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the order of checking of sources for the operating system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 17. Boot Device Priority Submenu
■
■
Be aware of the operating environment when booting from a CD-ROM/DVD-ROM or you may over-
write files by mistake.
A bootable CD-ROM/DVD-ROM has either a floppy disk format or a hard drive format. When the boot-
able CD-ROM/DVD-ROM is used, the drive allocations change automatically without changing the BIOS
setup. If a floppy disk format is used, the CD-ROM/DVD-ROM becomes Drive A. The CD-ROM/DVD-
ROM will only take drive C: (hard drive format) if the internal hard drive is not present or is disabled. The
bootable CD-ROM/DVD-ROM can never use a C: designation if a formatted internal hard drive is
present since the C: designator is always reserved for the internal hard drive. The boot sequence ignores
the new drive designations, however, your application software will use the new designations.
Booting from a Thumb (Flash) Drive: To boot up the system using a thumb (flash) drive, perform the
following steps (note that a third party utility is required in order to make the USB drive bootable):
1. Insert the drive into a USB port and power up the system.
■
2. When the Fujitsu logo appears, press the [F2] key.
3. Go to the Boot tab and scroll down to Boot Device Priority and press the [Enter] key.
4. Arrow down to Hard Disk Drive and press the [Enter] key.
5. Arrow down to select the XXXMB Hard Drive (USB).
6. Press the Space bar until the USB Hard Drive moves to the top of the list.
7. Press the [F10] button, then click Yes to exit the setup utility.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
Table 17: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To view all devices related to a source, press [Enter]; to view all devices related to all sources, press
[Ctrl] + [Enter]. To change the order, highlight one source by using the [up] or [down] cursor keys and then press
the [+] or [-] key to change the order number. [Shift] + [1] enables or disables a device. Tapping [d] removes from
the list a device that is not installed. Be sure to save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be overwritten,
depending upon your operating environment.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the Esc key to go to the Exit menu. If you wish to
move to another menu, use the cursor keys.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
N
S e r i e s N o t e b o o k B I O S
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screens that provides the
configuration information for your notebook.
The information, including CPU type and
The following table shows the names of the menu fields
for the Info menu and the information displayed in
those fields. These fields are for information purposes
only, and cannot be modified by the user.
speed, and total memory, displayed on this
screen varies according to the unit you
purchased.
PhoenixBIOS Setup Utility
Security Power Savings
Main
Advanced
Boot
Info
BIOS Version:
BIOS Date:
BIOS Area:
1.09
10/10/2005
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R) Pentium(R) M processor 750
1.86 GHz
64 KB
2048 KB
Total Memory:
512 MB
Memory Slot 1: 512 MB DDR2 SDRAM
Memory Slot 2: None
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 18. Info Menu
Table 18: Fields, Options and Defaults for the Info Menu
Note that the parameters listed in the following table may be different, depending upon the system configuration.
Menu Field
BIOS Version:
BIOS Date:
BIOS Area:
CPU Type:
Default
Menu Field
L1 Cache:
Default
1.0X
64 KB
XX/XX/XXXX
L2 Cache:
2048 KB
E000h – FFFFh
Total Memory:
Memory Slot 1:
Memory Slot 2:
512 MB
Intel(R) Pentium(R) M processor 750
1.86 GHz
512 MB DDR2 SDRAM
None
CPU Speed:
28
Download from Www.Somanuals.com. All Manuals Search And Download.
E x i t M e n u
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through
The Setup Utility on page 2 for more information.)
The following table shows the names of the menu fields
for the Exit menu, the default settings and a description
of the field's function and any special information
needed to help understand the field's use.
PhoenixBIOS Setup Utility
Security Power Savings
Main
Advanced
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Exit System Setup and
save your changes to
CMOS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 19. Exit Menu
Table 19: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes will store the entries on all setup utility menus to the BIOS memory and then exit the setup utility.
A confirmation message Save Configuration changes and exit now? [Yes] [No] will be displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes will exit the setup utility with out writing to the BIOS memory. When the BIOS recog-
nizes this selection it will load the operating system and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Discard
Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load pre-
vious now? [Yes] [No] will be displayed. When confirmed the setup utility will return to the Exit menu. To return
to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Save Changes
Selecting Save Changes will cause the new settings in all menus to be written to the BIOS memory. The message Save
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return to
the Exit menu. To return to another menu, follow the directions in the Navigating Through the Setup Utility section.
Save Changes
and Power Off
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory, after
which the system will power itself off. The message Save configuration changes and power off now?
[Yes] [No] will be displayed. When confirmed, the setup utility save the settings and the system will power off.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|