Fujitsu Flat Panel Television HE4VS01E User Manual

USER’S MANUAL (1/2)  
(Functions and connections)  
WIDE PLASMA DISPLAY  
P42VCA30W/P42VCA30E  
WITH OPTIONAL VIDEOBOARD  
(P-TE1100/P-TE1110/P-TE1120/P-TE1130)  
HE4VS01W/HE4VS01E  
WITH OPTIONAL VIDEOBOARD (HETES01/HETES02)  
Contents  
Page  
Accessories ······················································ E-2  
Part Names and Functions ······················· E-3E-6  
Installation ······················································· E-7  
Options······················································ E-8E-9  
Factory Settings ············································ E-10  
Specification ···················································E-11  
Before Use  
Safety Precautions ··············· Users manual (2/2)  
Usage  
Using the Remote Control ··· Users manual (2/2)  
Connecting the Display to External  
Equipment ···························· Users manual (2/2)  
Basic Operations ·················· Users manual (2/2)  
Selecting Input Mode··········· Users manual (2/2)  
Watching Pictures on the Wide Screen  
··············································· Users manual (2/2)  
Adjustments  
Adjusting Pictures (PICTURE Menu)  
··············································· Users manual (2/2)  
Adjusting Screen Position and Size  
(POSITION/SIZE Menu) ········ Users manual (2/2)  
Adjusting Audio (AUDIO Menu)  
··············································· Users manual (2/2)  
Other Adjustments  
(FEATURES Menu) ··············· Users manual (2/2)  
Initialization of User Adjustment Value  
(FACTORY DEFAULT) ··········· Users manual (2/2)  
Cleaning and Maintenance ··· Users manual (2/2)  
Before using the display, read the User’s manual (1/2) and the User’s manual (2/2) carefully so that you know how  
to use the display correctly.  
Refer to these manuals whenever questions or problems about operation arise. Be sure to read and observe the  
safety precautions.  
Keep these manuals where the user can access them readily.  
* Installation and removal require special expertise. Consult your product dealer for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS  
Front  
1 Power indicator lamp  
This lamp shows the state of the power supply.  
Lit (red):  
Power OFF (stand-by)  
Power ON  
Lit (green):  
Lit (orange):  
Power saving (DPMS: Power  
saving function) mode ON  
Flashing (red or green): Malfunction (Flashes differently  
depending on the type of  
①�  
malfunction.)  
②�  
2 Remote control signal receiver  
Receives signals from the remote control.  
Warning  
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to  
remove the power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Back and bottom (With the video board)  
1 OFF/STD-BY switch  
OFF  
STD-BY :The power indicator lamp lights red, and the power can be turned on or off by the power button.  
2 RS-232C terminal (RS-232C)  
:The power indicator lamp goes off, and the power can’t be turned on by the power button. The power is partly supplied.  
This terminal is provided for you to control the display from the PC. Connect it to the RS-232C terminal on the PC.  
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)  
3 RGB1 input terminal (RGB1 INPUT/mD-sub)  
Connect this terminal to the PC’s display (analog RGB) output terminal or decoder (digital broadcast tuner, etc.) output terminal.  
4 Power input terminal  
Connect this terminal to the power cable supplied with the display.  
When connecting a cable, attach a ferrite core to the cable. (See P. E-2)  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 External speaker output terminal (EXT SP)  
Connect this terminal to the optionally available speaker.  
(When using other speaker than the optional one, use 4–16 speaker.)  
When connecting a cable, attach a ferrite core to the cable. (See P. E-2.)  
6 Sound 1 input terminal (AUDIO1 INPUT)  
7 Sound 2 input terminal (AUDIO2 INPUT)  
8 Sound 3 input terminal (AUDIO3 INPUT)  
Connect this terminal to the sound output terminal of your VCR, etc.  
* The Sound 3 input terminal (AUDIO3 INPUT) is not available for the video board P-TE1110/HETES02.  
9 RGB2 input terminal (RGB2 INPUT/BNC)  
Connect this terminal to the PC’s display (analog RGB) output terminal.  
0 RGB2 synchronization switch (SYNC SW TTL/ANALOG (75 ))  
This switch is used to terminate horizontal (H) terminal and vertical (V) terminal, out of RGB2 input terminals, with 75 .  
TTL  
: Does not terminate.  
ANALOG (75 ) : Terminates.  
A S-Video input terminal (S VIDEO INPUT)  
Connect this terminal to the S-video output terminal of your VCR.  
B Video input terminal (VIDEO INPUT)  
Connect this terminal to the video output terminal of your VCR.  
C Video board (Optional)  
* Terminal layout may differ and functions may not be available with some models and some device options.  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
Description of Input Terminals  
RGB1 terminal (RGB1 INPUT/mD-sub)  
Pin No. Input signal Pin No.  
Input signal  
1
2
3
4
5
6
7
8
Red  
9
Green  
Blue  
10  
Ground  
11  
12  
Ground  
Ground  
Ground  
Ground  
13  
Horizontal synchronization  
14  
Vertical synchronization  
15  
Frame  
Ground  
RS-232C terminal (RS-232C)  
Pin No.  
Signal  
1
2
3
4
5
6
7
8
9
DCD (Data Carrier Detect)  
RD (Received Data)  
TD (Transmit Data)  
DTR (Data Terminal ready)  
GND (Ground)  
DSR (Data Set Ready)  
RTS (Request To send)  
CTS (Clear To Send)  
RI (Ring Indication)  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
To prevent the displays internal components from overheating, make sure that the display is installed in a well-ventilated location.  
Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this display. Also, be  
sure that your dealer performs the installation.  
See the appropriate instruction manual for more information on the installation hardware you select.  
To ensure proper heat radiation, provide at least as much space around the display as shown below.  
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.  
* Install this device in a well-ventilated area. Keep the air vents of the device free from obstruction.  
* Never attempt to tilt the display sideways or backward.  
* To prevent the power and other cables from being accidentally pulled, be sure to make the wiring work along the wall or through the  
corners of floor.  
* To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.  
Horizontal type  
Front  
Side  
(cm)  
(cm)  
Upper  
10  
10  
10  
Left  
Right  
Wall  
5
Lower  
3.5  
Note  
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing  
materials originally supplied with the display when repacking it.  
Reference  
See P.E-8 for more information on options.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTIONS  
Wall-mounting Bracket  
0° to 15° mounting angle  
P-WB4201  
P-CT4200  
Ceiling unit  
0° to 15° mounting angle  
Desktop Stand unit  
Speaker system  
P-TT4200  
P-42SP11  
(1 set of 2 speakers)  
Desktop Speaker Stand  
P-42ST11  
(1 set of 2 speakers stands)  
Videoboard  
• P42VCA30  
Terminal  
RGB2 terminal  
RGB2 terminal  
Speaker terminal  
Video, S-video  
Designation  
P-TE1100  
P-TE1110  
P-TE1120  
P-TE1130  
• HE4VS01  
Terminal  
Speaker  
Video, S-video  
Designation  
HETES01  
(internal)  
(internal)  
HETES02  
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.  
* The colors of options do not match the display colors perfectly.  
* To improve the function and performance of optional accessories, specifications and part names may change. Consult your local dealer  
before purchasing.  
Warning  
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.  
CAUTION: This display (P42VCA30, HE4VS01) is for use only with Fujitsu General Limited’s option (P-  
WB4201, P-CT4200, P-TT4200).  
Using this display with other option can cause instability resulting in possible injury.  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLING THE VIDEO BOARD  
1. Turn the power supply switch to OFF.  
2. Remove the power plug from outlet.  
3. Remove the metal fittings on the installation position at the rear of  
this device (M3 screw x 2).  
4. Slide the video board into the installation opening along the left  
and right guide pins and insert the connectors.  
5. Use the accompanying screws to secure (M3 screw x 5, accompany  
video board).  
CAUTION: Follow the items given below, to prevent accidental injuries and possible electrical shock.  
Turn off the power supply and disconnect the power plug from outlet before installing the Video board unit.  
Do not remove the cabinet when installing the Video board unit.  
Do not remove screws expect for the specified user service screw marked “ ”.  
Do not use screws other than that specified in this manual for the installation of this Video board unit.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FACTORY SETTINGS  
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will delete the adjustment value of  
the first input signal.  
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on the User’s Manual (2/2) to adjust  
the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be  
displayed in accordance with the settings you most recently selected.  
Main corresponding signals (RGB mode)  
Display (dots x lines)  
640 x 480  
Horizontal frequency (kHz)  
Vertical frequency (Hz)  
59.94  
Signal  
31.47  
37.50  
43.27  
31.47  
37.88  
46.88  
53.67  
48.36  
60.02  
68.68  
63.98  
79.98  
75.00  
106.25  
31.02  
31.72  
47.71  
15.73  
15.63  
VGA  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
1280 x 1024  
1280 x 1024  
1600 x 1200  
1600 x 1200  
848 x 480  
852 x 480  
1360 x 768  
720 x 485  
720 x 575  
75.00  
85.01  
70.09  
60.32  
75.00  
85.06  
60.00  
75.03  
84.99  
60.02  
75.03  
60.00  
85.00  
60.00  
59.97  
60.01  
59.94  
50.00  
VGA 75 Hz  
VGA 85 Hz  
400 lines  
SVGA 60 Hz  
SVGA 75 Hz  
SVGA 85 Hz  
XGA 60 Hz  
XGA 75 Hz  
XGA 85 Hz  
SXGA 60 Hz  
SXGA 75 Hz  
UXGA 60 Hz  
UXGA 85 Hz  
60 fields  
50 fields  
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make  
sure that the vertical frequency of the input signal matches the above frequency.  
In the Video/S-video modes, the display has been factory-set as follows for different input signals:  
Main corresponding signals (Video, S-video mode)  
Horizontal  
Vertical  
Signal  
NTSC  
frequency (kHz)  
frequency (Hz)  
15.73  
15.63  
15.63  
15.63  
15.73  
59.94  
50.00  
50.00  
59.52  
59.94  
PAL  
SECAM  
PAL60  
4.43NTSC  
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.  
• “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.  
You can check input signals through “Information” on the FEATURES Menu screen. (See User’s Manual (2/2))  
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.  
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.  
• Functions may be different or unavailable with some models and some device options.  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
Model  
P42VCA30W/P42VCA30E  
42" wide screen:  
HE4VS01W/HE4VS01E  
Screen size  
92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal)  
36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal)  
Aspect ratio  
Weight  
16:9 (wide)  
31 kg / 68 lbs  
31.5 kg / 69.4 lbs  
Outer dimensions  
103.5 (W) x 64.0 (H) x 8.5 (D) cm  
40.7 (W) x 25.2 (H) x 3.3 (D) inch  
110-240 VAC 50/60Hz  
4.1–1.9 A  
(does not include outer projections)  
Power supply  
Current rating  
Number of pixels  
Colors  
852 (H) x 480 (V)  
16.77 million  
Sound output  
2 W + 2 W (EIAJ), 8  
(only with video board installed)  
Speaker  
2-internal (only with video board installed)  
Operating conditions  
Temperature: 0 to 40 °C / 32 to 104 °F  
Humidity:  
20 to 80 %  
External equipment terminals  
RGB1 input  
mD-sub, 3 rows, 15-pin  
Picture signal: 0.7 Vp-p/75 Ω  
Synchronization signal:TTL level  
Constrol terminal  
1 RS-232C connector (D-sub 9-pin)  
* The video board input specifications conform with those provided below.  
* Terminals may not be available with some video board models.  
* Consult your local dealer before purchase.  
External equipment terminals  
RGB2 input  
BNC terminal x 5 R: 0.7 Vp-p/75 Ω  
G: 0.7 Vp-p/75 Ω  
B: 0.7 Vp-p/75 Ω  
H: TTL Level or ANALOG (75 Ω)  
V: TTL Level or ANALOG (75 Ω)  
1 BNC terminal 1 Vp-p/75 Ω  
Video input  
S-video input  
1 S terminal  
Y: 1 Vp-p/75 Ω  
C: 0.286 Vp-p/75 Ω  
Sound terminals  
2 sound input pin jacks (L/R) (3 lines), 500 mVrms/ at least 22 kΩ  
(The Sound 3 input terminal (AUDIO3 INPUT) is not available for the video board P-TE1110/HETES02.)  
External speaker output terminal Effective max. output:10 W + 10 W (EIAJ), 8 Ω  
Regulation  
• UL, CSA Safety: UL6500, C-UL  
EMC: FCC Part 15 Class A, ICES-003 Class A  
• CE Safety: EN60065  
EMC: EN55022  
1998, Class A  
1995  
EN61000-3-2  
EN61000-3-3  
EN55024  
1995  
1998  
EN61000-4-2  
EN61000-4-3  
EN61000-4-4  
EN61000-4-5  
EN61000-4-6  
EN61000-4-8  
1995  
1996  
1995  
1995  
1996  
1993  
EN61000-4-11 1994  
• AS Safety: IEC60065  
EMC: AS/NZS 3548  
• Specifications and external appearance may be change for the sake of improvement.  
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Dynex TV Cables DX AD113 User Manual
Edelbrock Water Pump 8805 User Manual
Everpure Water System ROM III User Manual
Extron electronic Network Card VSS 100 User Manual
Fellowes Computer Keyboard 861688 User Manual
Frigidaire Air Conditioner FSC09CH7M User Manual
Frigidaire Microwave Oven CPLMV169 User Manual
Gemini Turntable SA 600 User Manual
GE Monogram Refrigerator ZICS360 LH User Manual
Goodman Mfg Air Cleaner GSAS Series User Manual