Edelbrock Water Pump 8805 User Manual

VICTOR SERIES ALUMINUM WATER PUMPS  
1965-76, 352-428 Ford FE V8 Engines  
CATALOG #8805 (unpolished), #8835 (polished)  
INSTRUCTIONS  
PLEASE study these instructions carefully before installing your new water pump. If you have any questions or  
problems, do not hesitate to contact our Technical Hotline at: (800) 416-8628.  
• DESCRIPTION : The Edelbrock aluminum water pump is a heavy duty water pump for both street and racing  
applications. The pump is externally the same as the original equipment service pump (Ford #D4TZ-8501-H) to  
provide compatibility with all accessories and pulleys. It offers weight savings along with increased cooling  
potential. As with all Ford FE engines the water pump is designed to rotate in a standard clockwise direction  
(when viewed from the pulley side). The 8805 water pump may be compatible on 1958-1964 engines but may  
require modification of the generator mounting in some applications. Polished Aluminum Water Pump #8835  
fits the same applications as #8805.  
• INSTALLATION: Prior to installation install the bypass water pipe in the water pump housing. Apply teflon  
thread sealant to the bypass pipe and press or carefully drive the bypass tube into place. Check that there is  
clearance between the water pump bypass tube and the intake manifold bypass tube with the water pump in its  
installation position. If there is interference the water pump housing could be broken when the mounting bolts  
are tightened. Several of the water pump mounting bolt holes break through to water in Ford FE engines, thread  
sealer or silicone should be applied to the bolt threads at these locations. Installation is the same as for original  
equipment pumps. Consult your service manual for any other specific procedures.  
Caution: Be sure that the fan bolts don't protrude through the hub so far they hit the water pump housing.  
• SPECIAL NOTES :  
Check closely for any interference with drive belts or pulleys.  
If the engine is not using a water thermostat, a water flow restrictor plate should be used in place of the  
thermostat. The hole size needed in the restrictor plate may vary in size from 11/16" to 1" diameter depending  
on your water system. Use of a restrictor plate increases the water pressure in the block and cylinder heads and  
helps the radiator work more efficiently.  
Edelbrock water pumps are designed to provide increased water flow, pressure and efficiency, the impeller  
and housing passages are designed to work with the pump rotating in the correct direction. This pump should  
only be used with clockwise, standard rotation (when view from the pulley side). This pump will not function  
properly if used in a reverse-rotation, counter-clockwise application.  
• PARTS INCLUDED WITH THE WATER PUMP:  
• SPECIFICATIONS  
1 - Water Bypass Tube (To be installed in the pump  
Dimension from block surface to hub:  
7.56", hub pilot diameter - 5/8"  
housing prior to installation of the water pump)  
1 - 5/8" x 3/8"NPT Heater Hose Nipple  
1 - 3/8"NPT Pipe Plug  
4 - 3/8"-16 UNC x 1.50" Bolt, 12 Point Head  
4 - 3/8" AN Washer  
2 - Gasket, Water Pump to Block  
PLEASE complete and mail your warranty card. Be sure to write the model number of this product in the “Part  
#____” space.  
THANK YOU.  
1998 Edelbrock Corp  
Rev. 11/98  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Universal Remote BRD 280 User Manual
Electro Voice Portable Speaker M 12G User Manual
Electro Voice Portable Speaker Phoenix User Manual
Fisher Price Crib T1456 User Manual
Frigidaire Microwave Oven FFCE1431LW User Manual
GE Air Conditioner AZ85W18DAC User Manual
GE Double Oven JKP35SP User Manual
GE Refrigerator 200D8074P046 User Manual
GE Washer WWM657M User Manual
Global Machinery Company Brush Cutter 25CC User Manual