Fujitsu Car Satellite TV System P42HHS10A User Manual

USERS MANUAL  
42” WIDE PLASMA DISPLAY  
P42HHS10W/ P42HHS10A  
SELECTOR FOR  
42” WIDE PLASMA DISPLAY  
P-SU4H10W/ P-SU4H10A  
Contents  
Page  
Page  
Before Use  
Adjustm ents  
Safety Precautions ··································· E-2–E-3  
• Features ····························································E-4  
• Accessories ······················································ E-5  
• Handy Tips ······················································· E-5  
• Installation ······················································· E-6  
• Adjustm ent Menu ········································· E-30  
• Adjusting Pictures (PICTURE Menu)··· E-31–E-33  
• Adjusting Screen Position and Size  
(POSITION/SIZE Menu) ························ E-34–E-35  
• Adjusting AUDIO (AUDIO Menu) ········ E-36–E-37  
• Other Adjustm ents (FEATURES Menu)  
Usage  
• Part Nam es and Functions ···················· E-7–E-12  
• Using the Rem ote Control ··················· E-13–E-14  
• Connecting the Display to External Equipm ent  
······························································· E-15–E-23  
• Basic Operations ·································· E-24–E-25  
Selecting Input Mode ·····································E-26  
• Other Basic Operations ································· E-27  
• Watching Pictures on the Wide Screen  
······························································· E-38–E-44  
• INITIALIZATION OF USER ADJ USTMENT  
VALUE (FACTORY DEFAULT)························ E-45  
Others  
• Options ····························································E-46  
• Factory Settings ············································ E-47  
Specification ········································· E-48–E-49  
• Cleaning and Maintenance ····························E-50  
······························································· E-28–E-29  
Before using the display, read this m anual carefully so that you know how to use the display correctly.  
Refer to this m anual whenever questions or problem s about operation arise. Be sure to read and observe the  
safety precautions.  
Keep this m anual where the user can see it easily.  
* Installation and rem oval require special expertise. Consult your product dealer for details.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain  
or moisture, dose not operate normally, or has been dropped.  
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
Do not use attachments not recommended by the product manufacturer as they may cause hazards.  
Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire,  
electric shock, or other hazards.  
The apparatus shall not be exposed to dripping or splashing.  
No objects filled with liquids, such as vases, shall be placed on the apparatus.  
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious  
damage to the product. The product should be mounted according to the manufacturer’s instructions, and should use a mount  
recommended by the manufacturer.  
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces which may cause the  
product and cart to overturn, damaging equipment or causing possible injury to the operator.  
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from  
overheating. These openings must not be blocked or covered. (The openings should never be blocked by placing the product on bed,  
sofa, rug, or other similar surface. It should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is  
provided and the manufacturer’s instructions have been adhered to.)  
For proper ventilation, separate the product from other equipment, which may prevent ventilation, and keep distance more than 10 cm.  
This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power  
supply of your home, consult your product dealer or local power company.  
This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug  
into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug.  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay  
particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.  
For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it  
from the wall outlet and disconnect the cable system. This will prevent damage to the product due to lightning and power line surges.  
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric  
shock.  
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that  
could result in a fire or electric shock. Never spill liquid of any kind on the product.  
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltages and other hazards.  
Refer all service to qualified service personnel.  
Unplug this product from the wall outlet and refer service to qualified service personnel if the product does not operate normally by following  
the operating instructions. Adjust only those controls that are covered by the Operation Manual, as an improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.  
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or with  
same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.  
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the  
product is in proper operating condition.  
The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products  
(including amplifiers) that produce heat.  
When connecting other products such as VCR’s, and personal computers, you should turn off the power of this product for protection  
against electric shock.  
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that present special  
hazards when overheated.  
Use only the accessory cord designed for this product to prevent shock.  
The power supply voltage rating of this product is AC110–240 V, and the power cord attached conforms to the following power supply  
voltage. Use only the power cord designated by our dealer to ensure Safety and EMC.  
When it is used with other power supply voltage, the power cable must be changed.  
Use the standard power plug and cord set of the specified country.  
Power cord  
Consult your product dealer.  
Power supply voltage:  
AC 100–125 V  
(42”W Included)  
AC 200–240 V  
(Not included)  
AC 240 V (SAA TYPE)  
(42”A Included)  
E-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Variety of input signals  
• The unit features four video and four S-video input terminals, and five component video terminals.  
• In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling DVI standard (HDCP*) high  
definition picture quality.  
• Depending on the model, the display supports video input for different color television systems as follows: NTSC, PAL, SECAM,  
PAL60, N-PAL, M-PAL, 4.43NTSC.  
Desired screen size  
• This display offers a total of five different screen sizes in video input mode: Normal, Wide1, Wide2, Zoom1, and Zoom2.  
A Normal mode is also available for displaying of normal-size (4:3 aspect ratio) pictures.  
• The display has a Compose mode to switch screen size automatically depending on the contents of software.  
• Three different screen sizes in RGB input mode (Normal, Wide, and Zoom) are also available.  
Picture quality  
• Pro-setting allows adjustment for even higher picture quality.  
• Noise reduction function reduces noise to ensure clear pictures.  
• A display suitable for such film materials as movie pictures can be made by 24 frame mode function.  
• Jaggies filter function makes it simple to watch sharp images in vivid colors.  
Convenient power saving setting  
• When no video signal is input to the display or the remote control is not operated for a long time, this function automatically reduces  
the power consumption of the unit.  
Others  
• The white screen and screen orbiter functions are available to minimize phosphor burn-in.  
• Optic audio inputs and outputs provided.  
* The HDCP (High-bandwidth Digital Content Protection) function ensures that high-vision digital contents (movies, etc.) provided with  
copy-guard protection can be displayed on the plasma display.  
E-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
CHECKING ACCESSORIES  
Selector Section  
One rem ote control  
Two AA batteries  
One power cable  
(42”W Type)  
(42”A Type)  
Display Section  
One users m anual  
One power cable  
Two ferrite cores  
One System cable  
(picture)  
One System cable  
(audio)  
Manual  
(42”W Type)  
(42”A Type)  
HANDY TIPS  
• Viewing the screen constantly for extended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet)  
from the screen and to look occasionally away while working.  
• Have the display inspected and cleaned by your dealer at regular intervals.  
• Pictures may become “burnt” into the screen phosphors if the screen is left on for extended periods. To ensure that the display has a  
prolonged service life, be sure to use a screen orbiter, white screen. This will ensure the same picture or pattern is not constantly  
displayed for long periods. (See P. E-43–E-44.)  
• The plasma display panel, which is built for maximum precision, provides more than 99.99% effective pixels. You may find, however,  
that some pixels constantly remain lit or dimmed.  
• The display has a fan to prevent its internal temperature from rising.  
• Be careful with the air delivered by the fan. It may be very hot.  
• Contact your dealer if you find that the display does not seem to function properly when used with other audio-visual equipment.  
You may need to move your display if it produces degraded pictures or noise due to electromagnetic radiation, or if the infrared remote  
control does not function properly.  
• Pictures may not be displayed properly if you connect a non-standard PC to the RGB input terminal. In this case, contact your dealer  
for more information.  
• The protective circuit, built into the display, automatically turns off the power if the display has a problem. In this case, you will see  
that the power indicator lamp flashes red.  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle to prevent fire or electric shock. Then, check the display in accordance with the instructions given on  
P. E-50, or contact your dealer.  
Inform ation  
Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.  
E-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.  
Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display. Also, be also sure that your dealer  
performs the installation.  
See the appropriate instruction manual for more information on the installation hardware you select.  
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below.  
To ensure proper heat radiation, provide at least as much space around the display as shown below.  
* Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C.  
* Never attempt to tilt the display sideways or backward.  
* To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.  
* The display can be installed with either of its sides facing down.  
Main unit (stand)  
Front  
Side  
Upper  
10  
(cm)  
(cm)  
4
10  
10  
Wall  
Right  
Left  
5
Floor  
Floor  
Stand  
Stand  
Main unit (other than stand)  
Front  
Side  
(cm)  
(cm)  
Upper  
10  
Wall mounting unit  
10  
10  
Left  
Right  
Wall  
5
Lower  
4
Selector section  
Front  
Side  
(cm)  
(cm)  
Upper  
Upper  
Rear  
Right  
Left  
Floor  
Floor  
Note  
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing  
materials originally supplied with the display when repacking it.  
Reference  
See P. E-46 for more information on options.  
E-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS  
DISPLAY SECTION – FRONT  
1 Power indicator lamp  
This lamp shows the state of the power supply.  
(Right section)  
Lit (red):  
Stand-by  
Lit (green):  
Power ON  
Lit (orange): Power saving (DPMS: Power saving  
function) mode ON (See P. E-42.)  
Flashing (red): Malfunction (Flashes differently depending  
on the type of malfunction. See P. E-50 for  
more information.)  
2 Remote control signal receiver  
Receives signals from the remote control.  
3 Input mode selector button [MODE]  
4 Input mode selector button [MODE]  
Switches between picture input modes.  
5 VOL + button  
6 VOL – button  
Adjusts the sound volume.  
7 Wide screen selector button [WIDE]  
Switches the screen over to a desired wide screen.  
8 ON/OFF button  
Turns the power “ON” and “OFF (standby state)”.  
Control Panel (Right side of display)  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.  
E-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
DISPLAY SECTION – LOWER PART  
1
power switch  
When pressed while in the “OFF” state, the power indicator lamp lights and the display is placed in the “ON ” state, and the power  
can be turned “ON” or “OFF” by the remote control or on the control panel of the display. When pressed while in the “ON ” state,  
the power indicator lamp goes out and the display is placed in the “OFF” state.  
2 Display input (picture) terminal  
Connect this terminal to the display output terminal on the tuner using the special cable provided.  
3 Display input (audio) terminal  
Connect this terminal to the display output terminal on the tuner using the special cable provided.  
4 External speaker output terminal (EXT SP)  
Connect this terminal to the optionally available speaker.  
When connecting a cable, attach a ferrite core to the cable. (See P. E-15.)  
*See the speaker instruction manual for more information.  
5 Power input terminal  
Connect this terminal to the power cable supplied with the display.  
E-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTOR SECTION – FRONT  
1 Pow er indicator lam p  
This lamp shows the state of the power supply.  
Lit (red):  
Stand-by  
Lit (green):  
Power ON  
Lit (orange): Power saving (DPMS: Power saving function) mode ON (See P. E-42.)  
Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-50 for more information.)  
2 Rem ote control signal receiver  
Receives signals from the remote control.  
3 POWER button  
Turns the power “ON” and “OFF”.  
* Even when the power is “OFF”, some parts are still powered.  
4 Video3, S-video input term inal *  
Connect this terminal to the S-video output terminal of your VCR, etc.  
5 Video3, video input term inal *  
Connect this terminal to the video output terminal of your VCR, etc.  
6 Audio input term inals (L/ R)  
These are the audio input terminals for the Video3 and RGB3 terminals.  
Input the audio for the video to be seen here.  
7 RGB3 input term inal  
Connect this terminal to your PC’s mD-sub output terminal.  
* On selecting the video input format  
(See “SETTING THE INPUT TERMINALS” on P. E-41.)  
Warning  
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the  
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.  
E-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
SELECTOR SECTION – REAR  
VIDEO1  
VIDEO2  
VIDEO4  
VIDEO5  
VIDEO6  
RGB1  
RGB2  
AUDIO  
OUTPUT  
AUDIO  
INPUT  
DIGITAL1 DIGITAL2  
DIGITAL  
VIDEO1  
VIDEO2  
COMPONENT VIDEO  
VIDEO4  
COMPONENT VIDEO  
COMPONENT VIDEO  
S
S
S
Y
PB/CB  
PR/CR  
Y
PB/CB  
PR/CR  
Y
PB/CB  
PR/CR  
PICTURE  
INPUT  
VIDEO1  
RGB2  
VIDEO5  
COMPONENT VIDEO  
COMPONENT VIDEO  
mD-sub  
Y
PB/CB  
PR/CR  
Y
PB/CB  
PR/CR  
RGB1  
DVI  
PICTURE  
AUDIO  
DISPLAY OUTPUT  
1 Audio input terminals  
Input audio through the terminals corresponding to the used video input terminals.  
* The digital input terminals can be matched as desired with the remote control. (See P. E-27.)  
2 Audio output terminals  
For use when the sound from an audio system (amplifier) is used.  
3 Video1 input terminal  
4 Video2 input terminal  
5 Video4 input terminal  
Connect this terminal to the component video output terminal, S-video output terminal, or video output terminal of your VCR or DVD,  
etc.  
* See “SETTING THE INPUT TERMINALS” on P. E-41.  
6 Video5 input terminal  
7 Video6 input terminal  
Connect this terminal to the component video output terminal of your DVD, etc.  
8 RGB1 input terminal  
Connect this terminal to the monitor (DVI-D) output terminal of your PC.  
9 RGB2 input terminal  
Connect this terminal to the monitor (mD-sub) output terminal of your PC.  
0 Display output terminals (Picture/Audio)  
Connect these terminals to the picture input terminal and audio input terminals on the display.  
A Power input terminal  
Connect this terminal to the power cable supplied with the display.  
E-10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of Input Terminals  
DVI-D terminal (RGB 1 INPUT/DVI-D)  
RGB2 input terminal (RGB2, 3 INPUT/mD-sub)  
Pin No. Input signal  
Pin No.  
9
Input signal  
1
2
3
4
5
6
7
8
Red  
Green  
Blue  
10  
Ground  
11  
12  
Ground  
Ground  
Ground  
Ground  
13  
Horizontal synchronization  
14  
Vertical synchronization  
15  
Frame  
Ground  
E-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PART NAMES AND FUNCTIONS (Continued)  
REMOTE CONTROL  
For details, see page  
.
1
button  
2 STILL button  
Switches between power ON and standby  
state.  
Displays a still picture during viewing.  
3 MUTE button  
4 DISPLAY OFF button  
For showing on-screen-information.  
5 PICTURE MODE button  
Switches the picture mode.  
8 AUDIO IN button  
Temporarily mutes the sound.  
6 PICTURE MEMORY button  
Recalls the PICTURE MEMORY.  
7 WIDE button  
Switches the screen over to a desired wide  
screen.  
Selects the input audio.  
0 Video input mode selector button  
9 OFF-TIMER  
[VIDEO 1 – 6]  
Sets when the power should be turned off.  
Selects VIDEO 1 – 6  
B Volume adjustment buttons  
A RGB input mode selector button  
[VOL +/– ]  
[RGB 1 – 3]  
Adjust the volume.  
Selects RGB 1 – 3.  
Press the + button to increase the volume.  
Press the – button to reduce the volume.  
C Menu button [MENU]  
E Adjustment buttons [  
/
/
/
]
Use this button to display a desired menu  
for adjusting the picture.  
Use these buttons to scroll through options  
in a menu.  
D Enter button [ENTER]  
Press this button to finalize the selection of  
a desired menu or option within a menu.  
E-12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL  
PUTTING BATTERIES IN THE REMOTE CONTROL  
1 To remove the cover, slide it  
2 Place two AA batteries in the  
remote control. Make sure that the  
batteries are properly oriented.  
3 Close the cover until it snaps into  
outwards while pressing it down.  
place.  
PRECAUTIONS  
To prevent malfunction, be sure not to apply any form of severe shock to the remote control.  
To prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or  
heating equipment.  
Be sure not to clean the remote control using a cloth dampened in any volatile solvent, such as benzene or thinner.  
CAUTION: Be sure to use replacement batteries of the same type as the original ones.  
When disposing of used batteries, please comply with governmental regulations or environmental  
public institution’s rules that apply in your country/area.  
Note  
The remote control will not function properly if the batteries are dead. Be sure to replace them as needed.  
Do not use rechargeable batteries (Ni-Cd).  
E-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE REMOTE CONTROL (Continued)  
EFFECTIVE RANGE FOR THE REMOTE CONTROL  
Point the remote control at the display’s signal receiver when using it.  
Make sure that there are no obstacles between the remote control and the display’s signal receiver.  
Left  
Right  
5 m (Front)  
Left  
Right  
5 m (Front)  
Display – front  
Selector – front  
Upper  
Upper  
Lower  
Lower  
Selector – side  
Display – side  
Information  
The remote control may not function properly if you use a high-frequency fluorescent lamp. If you experience problems, move the lamp or use the  
remote control from a different position.  
E-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT  
Be sure to turn OFF the power to the display and external equipment before making any connections.  
No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC  
model. Contact your dealer for more information.  
RECEPTACLE  
Make sure that the power cable’s grounding wire is grounded.  
The display comes with a 3-prong power plug; one prong is connected to the grounding wire. If you have only a 2-hole receptacle, you  
will need to have it replaced. Contact your dealer for more information.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT  
Carefully check the terminals for position and type before making any connections.  
Loose connectors can result in picture or color problems. Make sure that all connectors are securely inserted into their terminals.  
Ferrite cores  
These ferrite cores are used to attenuate undesired signals.  
2 ferrite cores  
When connecting a cable to the external speaker output terminal, attach a ferrite core to the cable near the  
terminal as illustrated on the right.  
E-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)  
BASIC SYSTEM CONNECTIONS  
Display  
Speaker (optional)  
3-pin outlet  
3-pin outlet  
Selector  
1. Connect the following items to the selector and the display  
1 Selector and display  
Connect these two with the provided system connection cable. (For details, see the page on the right.)  
2 Speakers  
For how to connect speakers, see the instructions provided with the speakers.  
2. Connecting the power cord  
• Connect the power plug of the display and selector power cords to a 3-pin outlet.  
E-16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY AND THE SELECTOR  
Rear side of display  
Left speaker cable  
Right speaker cable  
Red  
Black  
Power input  
Display input terminal  
Audio  
terminal  
Picture  
terminal  
To AC outlet  
VIDEO1  
VIDEO2  
VIDEO4  
VIDEO5  
VIDEO6  
RGB1  
RGB2  
AUDIO  
OUTPUT  
AUDIO  
INPUT  
DIGITAL1 DIGITAL2  
DIGITAL  
VIDEO1  
VIDEO2  
COMPONENT VIDEO  
VIDEO4  
COMPONENT VIDEO  
COMPONENT VIDEO  
S
S
S
Y
PB/CB  
PR/CR  
Y
PB/CB  
PR/CR  
Y
PB/CB  
PR/CR  
PICTURE  
INPUT  
VIDEO1  
RGB2  
VIDEO5  
COMPONENT VIDEO  
COMPONENT VIDEO  
mD-sub  
Y
PB/CB  
PR/CR  
Y
PB/CB  
PR/CR  
RGB1  
DVI  
PICTURE  
AUDIO  
DISPLAY OUTPUT  
Rear side of selector  
E-17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)  
EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS  
Speaker (optional)  
Speaker  
Display  
Remote  
control  
Selector  
VCR or other external components See P.  
VCR  
Satellite tuner  
Video camera  
PC  
DVD player  
Videogame machine  
Amplifier  
E-18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR  
• Connect the video signal cable to either the S-video input terminal or the video input terminal.  
To S-video  
output  
To video output  
To audio outputs  
To video input  
To audio inputs  
VIDEO1  
VIDEO2  
VIDEO4  
VIDEO5  
VIDEO6  
RGB1  
RGB2  
AUDIO  
OUTPUT  
AUDIO  
INPUT  
DIGITAL1 DIGITAL2  
DIGITAL  
VIDEO1  
VIDEO2  
COMPONENT VIDEO  
VIDEO4  
COMPONENT VIDEO  
COMPONENT VIDEO  
S
S
S
Y
P
B/CB  
PR/CR  
Y
P
B/CB  
PR/CR  
Y
P
B/CB  
PR/CR  
PICTURE  
INPUT  
VIDEO1  
RGB2  
VIDEO5  
COMPONENT VIDEO  
COMPONENT VIDEO  
mD-sub  
Y
P
B/CB  
PR/CR  
Y
PB/CB  
PR/CR  
RGB1  
DVI  
PICTURE  
AUDIO  
DISPLAY OUTPUT  
Rear side of selector  
To S-video input  
Note  
• Unplug the power cord from the AC outlet before you connect external components.  
• Also refer to the instructions for the component to be connected.  
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.  
E-19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)  
DVD PLAYER  
• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.  
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video  
terminal.  
To video output  
To S-video  
output  
To audio outputs  
To audio  
inputs  
To component  
video output  
To video input  
VIDEO1  
VIDEO2  
VIDEO4  
VIDEO5  
VIDEO6  
RGB1  
RGB2  
AUDIO  
OUTPUT  
AUDIO  
INPUT  
DIGITAL1 DIGITAL2  
DIGITAL  
VIDEO1  
VIDEO2  
COMPONENT VIDEO  
VIDEO4  
COMPONENT VIDEO  
S
COMPONENT VIDEO  
S
S
Y
PB/CB  
P
R/CR  
VIDEO5  
Y
PB/CB  
P
R/CR  
Y
P
B/CB  
PR/CR  
PICTURE  
INPUT  
VIDEO1  
RGB2  
COMPONENT VIDEO  
COMPNT VIDEO  
mD-sub  
Y
P
B/CB  
P
R/CR  
Y
PB/CB  
PR/CR  
RGB1  
DVI  
PICTURE  
AUDIO  
DISPLAY OUTPUT  
Rear side of selector  
To component video input  
To S-video input  
AMPLIFIER  
• Connect the audio signal cable to either the digital output or the analog audio output.  
* The signal input as digital input is not output as analog audio.  
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.  
In the case of outputs with another frequency, connect to an audio system (amplifier)*.  
To digital audio input  
To analog audio input  
To analog audio output  
To digital audio output  
VIDEO1  
VIDEO2  
VIDEO4  
VIDEO5  
VIDEO6  
RGB1  
RGB2  
AUDIO  
OUTPUT  
AUDIO  
INPUT  
DIGITAL1 DIGITAL2  
DIGITAL  
VIDEO1  
VIDEO2  
COMPONENT VIDEO  
VIDEO4  
COMPONENT VIDEO  
S
COMPONENT VIDEO  
S
S
Y
P
B/CB  
P
R/CR  
VIDEO5  
Y
P
B/CB  
P
R/CR  
Y
P
B/CB  
PR/CR  
PICTURE  
INPUT  
VIDEO1  
RGB2  
COMPONENT VIDEO  
COMPONENT VIDEO  
mD-sub  
Y
P
B/CB  
P
R/CR  
Y
P
B/CB  
PR/CR  
RGB1  
DVI  
PICTURE  
AUDIO  
DISPLAY OUTPUT  
Rear side of selector  
E-20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SATELLITE TUNER  
• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.  
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video  
terminal.  
To S-video  
output  
To video output  
To audio outputs  
To component  
video output  
To audio  
inputs  
To video input  
VIDEO1  
VIDEO2  
VIDEO4  
VIDEO5  
VIDEO6  
RGB1  
RGB2  
AUDIO  
OUTPUT  
AUDIO  
INPUT  
DIGITAL1 DIGITAL2  
VIDEO4  
DIGITAL  
VIDEO1  
VIDEO2  
COMPONENT VIDEO  
COMPONENT VIDEO  
S
COMPONENT VIDEO  
S
S
Y
P
B/CB  
PR/CR  
Y
P
B/CB  
P
R/CR  
Y
P
B/CB  
PR/CR  
PICTURE  
INPUT  
VIDEO1  
RGB2  
VIDEO5  
COMPONENT VIDEO  
COMPNT VIDE
mD-sub  
Y
P
B/CB  
P
R/CR  
Y
P
B/CB  
PR/CR  
RGB1  
DVI  
PICTURE  
AUDIO  
DISPLAY OUTPUT  
Rear side of selector  
To component video input  
To S-video input  
Note  
• Unplug the power cord from the AC outlet before you connect external components.  
• Also refer to the instructions for the component to be connected.  
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.  
E-21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)  
VIDEO CAMERA  
• A video camera can conveniently be connected to the Video 3 input on the front side.  
• Connect the video signal cable to either the S-video input terminal or the video input terminal.  
• If the unit to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.  
To video and audio inputs  
To video and audio outputs  
To S-video output  
To S-video input  
Front side of selector  
VIDEOGAME MACHINE  
• As the connecting cable differs with videogame machines, please consult the instructions for your videogame machine.  
• Connect the video signal cable to either the S-video input terminal or the video input terminal.  
• Ensure that the same image (pattern) is not displayed on the screen for an extended period. If the same image is displayed on the screen for  
an extended period, the brightness of that part of the screen may change and image burn-in may leave an after-image on the screen.  
• If the videogame machine to be connected is equipped with S-video output terminal, it is recommended to connect to the S-video terminal.  
To video and audio inputs  
To video and audio outputs  
To S-video output  
To S-video input  
Front side of selector  
E-22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC  
• As the cable for connecting a PC differs with the PC model, please consult your dealer for information on the right cable to purchase.  
• The PC can be connected to either the front side or the rear side, whichever is most convenient.  
To RGB output (mD-sub)  
To audio output  
To RGB3 input  
(mD-sub)  
To audio input  
When connecting to the front side of the selector  
To RGB output (mD-sub)  
To audio  
input  
To audio output  
To RGB output (DVI-D)  
To RGB1 input  
(DVI-D)  
To RGB2 input  
(mD-sub)  
VIDEO1  
VIDEO2  
VIDEO4  
VIDEO5  
VIDEO6  
RGB1  
RGB2  
AUDIO  
OUTPUT  
AUDIO  
INPUT  
DIGITAL1 DIGITAL2  
DIGITAL  
VIDEO1  
VIDEO2  
COMPONENT VIDEO  
VIDEO4  
COMPONENT VIDEO  
COMPONENT VIDEO  
S
S
S
Y
P
B/CB  
PR/CR  
Y
P
B/CB  
PR/CR  
Y
P
B/CB  
PR/CR  
PICTURE  
INPUT  
VIDEO1  
RGB2  
VIDEO5  
COMPONENT VIDEO  
COMPONENT VIDEO  
mD-sub  
Y
P
B/CB  
PR/CR  
Y
P
B/CB  
PR/CR  
RGB1  
DVI  
PICTURE  
AUDIO  
DISPLAY OUTPUT  
When connecting to the rear side of the selector  
Note  
• Unplug the power cord from the AC outlet before you connect external components.  
• Also refer to the instructions for the component to be connected.  
• When inputting audio, connect to the terminals corresponding to the used video input or RGB input.  
E-23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
TURNING THE POWER ON AND OFF  
Press OFF/ON to the left at the  
1
bottom of the display and to  
the left at the bottom of the  
selector to the STD-BY state.  
The power lamp lights up.  
Press  
on the remote control.  
2
3
The color of the power lamp changes from “Red”  
to “Green”.  
Press  
or  
.
Select TV or the video mode to be input.  
Press  
when the power is ON.  
The color of the power lamp changes from  
“Green” to “Red” and the power turns “OFF”.  
* You can also use the buttons  
on the display’s control  
panel to perform these steps.  
E-24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING THE VOLUME  
Press the Volume button  
Press  
to increase the volume.  
Press  
to reduce the volume.  
Any value between 0 and 40 can be selected.  
* Note that the volume level remains stored even when you  
turn OFF the power.  
When the volume adjustment button is pressed  
Muting the sound  
Press  
.
The sound is removed.  
Press again to restore the sound to the original level.  
The mute mode can also be released by pressing the volume  
buttons.  
E-25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING INPUT MODE  
VIDEO INPUT MODE  
Press the  
buttons to  
1
select the input mode.  
You can select from VIDEO 1 mode to VIDEO 6  
mode.  
The video modes corresponding to each input  
terminal are as follows.  
• VIDEO1: Video, S-video, Component video  
• VIDEO2: Video, S-video, Component video  
• VIDEO3: Video, S-video  
Video1 mode  
• VIDEO4: Video, S-video, Component video  
• VIDEO5: Component video  
• VIDEO6: Component video  
* For selection of the input terminal, see  
“SETTING THE INPUT TERMINALS” on  
P. E-41.  
* You can also use the buttons  
on the display’s control  
panel to perform these steps.  
RGB INPUT MODE  
Press  
input mode.  
You can select between the modes from RGB1 to  
RGB3.  
to select the  
1
The input terminal of each RGB mode is as  
follows.  
• RGB1: DVI-D  
• RGB2: mD-sub  
• RGB3: mD-sub  
RGB1 mode  
E-26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER BASIC OPERATIONS  
CONVENIENT FUNCTIONS  
Still Picture (STILL)  
Press  
.
The currently viewed scene can be viewed as a still picture.  
Convenient when you want to take a note, etc. Press again to return to the normal picture.  
On-screen information showing the channel, etc. (DISPLAY)  
Press  
.
The channel or mode is indicated on the screen for 5 seconds.  
Picture Mode (PICTURE MODE)  
Press  
.
This button can be used to switch the picture mode.  
In the picture mode, you can switch between the set status and the fine mode.  
* For the picture mode settings, see “Setting Picture Mode (P. E-32)”.  
Picture Memory (PICTURE MEMORY)  
Press  
.
This button can be used to recall the settings of the picture memories 1 – 8. Each time this button is  
pressed, the setting changes as follows.  
Audio In (AUDIO IN)  
Press  
.
Switches the input audio. Each time this button is pressed, the input changes as follows.  
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.  
In the case of outputs with another frequency, connect to an audio system (amplifier)*.  
OFF-timer (OFF-TIMER)  
Press  
.
This can be used to set the time before the power is turned off. Each time this button is pressed, the setting  
changes as follows.  
E-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING PICTURES ON THE WIDE SCREEN  
SWITCHING BETWEEN SCREEN SIZES  
Press  
.
1
2
The currently selected mode will appear.  
Press  
picture mode.  
Each time you press , a different picture mode  
appears. The sequences used are as follows:  
to select a desired  
Normal mode  
When you are in a Video or S-video input mode  
When you are in a Comp.video input mode  
When you are in an RGB input mode  
Wide1 mode  
* You can also use the buttons  
on the display’s control  
panel to perform these steps.  
* Depending on the type of signal, some aspects  
may not be selected.  
Note  
• Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in.  
• A variety of picture modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame  
height) different from that of the TV program or video media, the pictures will appear differently than if you had selected a mode having the same  
aspect ratio.  
• Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for profit-making  
purposes or for a public audience may constitute a copyright infringement.  
For films, try to select a mode having the same aspect ratio as the original picture; this enables the director’s original intentions to be preserved.  
Reference  
See P. E-34–E-35 for how to adjust the picture size and position.  
E-28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SCREEN SIZE  
Normal  
Displays pictures of normal size (i.e., a 4:3 aspect ratio).  
Auto  
The screen size changes automatically in accordance with the contents of image software  
you use.  
Wide1  
Displays natural-looking pictures of standard size on the wide screen.  
Picture of  
Wide1  
Wide2  
Zoom1  
standard size  
Wide2/Wide  
Ideal for displaying vertically extended pictures such as squeezed pictures and recorded  
HDTV programs.  
Vertically  
extended picture  
Zoom1/Zoom  
Enlarges horizontally extended pictures equally in all directions to maintain the aspect  
ratio constant.  
Horizontally  
extended picture  
Zoom2  
Reduces the height of horizontally extended pictures with captions, without eliminating  
the caption. Only the height of pictures is reduced, not the height of the caption.  
Horizontally extended  
picture with caption  
Zoom2  
(Captions may not be easy to read, however, depending on the picture.)  
ASPECT RATIO  
The following aspect ratios are available.  
4:3 aspect ratio  
4
16:9 aspect ratio  
16  
(VHF/UHF broadcasting, BS broadcasting)  
(HDTV broadcasting)  
3
9
1.85  
2.35  
1.85:1 aspect ratio  
(Vista Vision size)  
2.35:1 aspect ratio  
(Cinema Vision size)  
1
1
Information  
You may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vista Vision or Cinema  
Vision size i.e., the sizes used frequently for picture software.  
E-29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJ USTMENT MENU  
ADJ USTMENT MENU  
PICTURE  
Contrast  
MENU  
POSITION/SIZE  
AUDIO  
Brightness  
Color  
FEATURES  
Tint  
FACTORY DEFAULT  
Sharpness  
Picture Mode  
PrecisionSetting  
Noise Reduction *  
Picture Memory  
Luminance  
Can be set when Fine is  
selected as the Picture Mode.  
Black Level  
Colour Temp.  
User Colour Temp.  
Position  
Size  
*: for other than RGB  
Treble  
Bass  
Balance  
Loudness  
Adjustment  
Function  
Dot Clock  
for RGB2,RGB3  
Clock Phase  
Clamp Position  
Auto Calibration  
for RGB2,RGB3  
for RGB2,RGB3,Comp.video  
On Screen Menu  
Input Terminal  
Others  
for RGB2,RGB3  
24 Frame Mode  
Jaggies Filter  
for Video  
OSD  
Language  
Name Select  
Video Input 1  
Video Input 2  
Video Input 3  
Video Input 4  
DVI Input  
Power Saver  
Screen Orbiter **  
Direct Setting **  
Code Setting  
White Screen  
Exhibition Mode  
Illumination  
Auto Off - UNTOUCH  
Auto Off - NO SIG.  
DPMS **  
for RGB2,RGB3  
**: for RGB  
Information  
E-30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING PICTURES (PICTURE MENU)  
BASIC OPERATIONS [EX.: ADJUSTING TINT (Tint)]  
You can make changes to all picture adjustment options in the PICTURE Menu.  
The changes you make will be stored for a selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select  
“PICTURE”.  
“PICTURE” selected in the main menu  
screen (Video Input Mode)  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The PICTURE Menu screen will appear.  
Press  
“Tint”.  
or  
to select  
3
4
Press  
.
The “Tint” adjustment screen will appear.  
“Tint” selected in the PICTURE Menu  
screen (Video Input Mode)  
Press  
or  
to change tint  
5
6
values.  
: More greenish colors  
: More purplish colors  
“Tint” adjustment screen  
Press  
to store.  
Press  
when you finish.  
* Repeat steps 3, 4, 5 and 6 when you wish to  
make changes to other options.  
* When  
is pressed after you have selected  
“Default”, the settings are returned to those that  
were valid when you purchased the set.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING PICTURES (PICTURE MENU) (Continued)  
• Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart.  
Select the item with  
, and then adjust with  
. Finally, press  
to implement the adjustments.  
Adjustment Item  
Adjustment Range/Remarks  
–30 to +30  
Contrast  
Lower contrast  
Darker screen  
Higher contrast  
Brightness  
Color  
Brighter screen  
Darker colors  
–60 to +60  
Lighter colors  
–60 to +60  
Tint  
More purplish colors  
More greenish colors  
–60 to +60 (RGB, Comp. video)  
–30 to +30 (Video, S-video)  
Sharpness  
Softer pictures  
Sharper pictures  
–4 to +4 (RGB)  
–16 to +16 (other than RGB)  
• Setting Picture Mode (Picture Mode)  
Can set up the picture mode.  
Each time you press or , one of the available choices appears in the following sequence:  
Dinamic:Suitable for watching a normal motion picture.(Standard)  
Fine: Suitable for watching a dark picture such as movie.  
Real 1: Makes a strong contrast picture.  
Real 2: Makes a bright color picture.  
Static: Suitable for watching a still picture.  
Press  
to store.  
*Select Dinamic, Fine, Real 1, Real 2 or Static to suit your taste.  
• Precision Setting (for more advanced adjustment)  
Luminance, Black Level, Color Temperature, and User Color Temperature are adjusted as shown in  
the following chart.  
Select the item with  
adjustments.  
, and then adjust with  
. Finally, press  
to implement the  
Adjustment Item  
Contents of Adjustments  
Operation  
to adjust.  
Adjustment Range/Remarks  
Luminance  
Adjusts the luminance level.  
(when the Picture Mode is Fine)  
Use  
Use  
Use  
40 to 100%  
Black Level  
Adjusts the picture when watching a dark  
image. (when the Picture Mode is Fine)  
to adjust.  
to adjust.  
to select, and use  
–15 to +15  
–3500 to +3500  
to 0 to 255  
Color Temperature  
Set to low to obtain a warm atmosphere,  
and set to high to obtain a cold atmosphere.  
User Color  
Temperature  
Enables individual adjustment of Red,  
Green and Blue.  
Use  
adjust.  
E-32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Setting Noise Reduction (Noise Reduction)  
Can select the noise reduction setting corresponding to the noise level of the input signal.  
Each time you press or ,one of the available choices appears in the following sequence:  
Off: Noise reduction does not function.  
Min.: Weak setting  
Std.: Standard setting  
Max.: Strong setting  
Press  
to store.  
*Some type of signal can not be selected.  
* You cannot select this function when Jaggies Filter is “On”.  
• Storing the setting of PICTURE (Picture Memry)  
Stores 8 patterns of adjustments set by PICTURE.  
Read out and store to suit your taste.  
In case of “Load”  
When setting “Load”: Read out your desired Setting.  
(1) Select “Picture Memory” and press  
The “Picture Memory” screen will appear.  
(2) Press or to select Load.  
(3) Select Data number to make Load.  
(4) Press to read out.  
.
“Picture Memory” selection screen  
In case of “Save”  
When setting “Save”: Set to suit your taste and store.  
(1) Select “Picture Memory” and press  
The “Picture Memory” screen will appear.  
(2) Press or to select Save.  
(3) Select Data number to make Save.  
(4) Press to save.  
.
“Load” selection screen  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU)  
BASIC OPERATION [EX.: ADJUSTING HORIZONTAL DIRECTION OF SCREEN POSITION]  
You can make changes to all screen adjustment options in the POSITION/SIZE Menu.  
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select  
“POSITION/SIZE”.  
“POSITION/SIZE” selected from the main  
menu screen  
Each time you press or , one of the available  
menus appears in the following sequence:  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The POSITION/SIZE Menu screen will appear.  
Press  
“Position”.  
or  
to select  
3
4
5
Press  
.
The “Position” adjustment screen will appear.  
Press  
,
,
or  
to  
change position values.  
: Moves screen up.  
: Moves screen down.  
:
:
Moves screen to the right.  
Moves screen to the left.  
“Position” adjustment screen  
Press  
Press  
to store.  
6
when you finish.  
* Repeat steps 3 to 6 when you wish to make  
changes to other options.  
* When  
is pressed after you have selected  
“Default”, the settings are returned to those that  
were valid when you purchased the set.  
E-34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Screen Position (Position)  
Horizontal position (Horizontal)  
: Moves screen to the right.  
: Moves screen to the left.  
“Position” adjustment screen  
Vertical position (Vertical)  
: Moves screen up.  
: Moves screen down.  
Press  
to store.  
Adjusting Screen Size (Size)  
Screen width (Width)  
: Increases width.  
: Reduces width.  
“Size” adjustment screen  
Screen height (Height)  
:
Increases height.  
: Reduces height.  
to store.  
Press  
*You cannot adjust screen size in RGB1 (DVI-D) mode.  
Setting Range  
Video, S-video mode  
Comp.video mode  
RGB mode  
Position  
Horizontal: -30 to +30  
Vertical  
-16 to +16  
-150 to +150  
Zoom:  
-15 to +15  
Others: -7 to +7  
Size  
-3 to +12  
-2 to +16  
-12 to +25  
* Depending on the input signal, the adjustment range may differ.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTING AUDIO (AUDIO MENU)  
BASIC OPERATION [EX.: ADJUSTING VOLUME BALANCE (Balance)]  
You can make changes to all sound adjustment options in the AUDIO Menu.  
The changes you make will be stored for the selected input mode. Therefore, you need to select a desired input mode before making any  
changes.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select “AUDIO”.  
Each time you press or , one of the available  
menus appears in the following sequence:  
“AUDIO” selected in the main menu screen  
FEATURES FACTORY DEFAULT  
PICTURE  
POSITION/SIZE  
AUDIO  
The AUDIO Menu screen will appear.  
Press  
“Balance”.  
or  
to select  
3
4
Press  
.
The “Balance” adjustment screen will appear.  
“Balance” selected in the AUDIO Menu  
screen  
Press  
or  
to adjust the  
5
6
balance.  
: Higher volume from the right-hand speaker  
: Higher volume from the left-hand speaker  
Press  
Press  
to store.  
when you finish.  
* Repeat steps 3 to 6 when you wish to make  
changes to other options.  
E-36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Treble (Treble)  
Any value between -6 and +6 can be selected.  
: Stronger treble  
: Weaker treble  
Adjusting Bass (Bass)  
Any value between -6 and +6 can be selected.  
: Stronger bass  
AUDIO Menu screen  
: Weaker bass  
Adjusting Volume Balance (Balance)  
Any value between -10 and +10 can be selected.  
: Higher volume from the right-hand speaker  
: Higher volume from the left-hand speaker  
Setting Loudness (Loudness)  
Corrects the balance between bass and treble for easy listening even with weak volume.  
Each time you press or , one of the available choices appears in the following  
sequence:  
Off : Loudness dose not function.  
Other than Off : Corrects bass and treble.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU)  
BASIC OPERATION [EX.: SELECTING LANGUAGE (Language)]  
You can make the following changes in the FEATURES Menu.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select  
“FEATURES”.  
Each time you press or , one of the available  
menus appears in the following sequence:  
“FEATURES” selected in the main menu  
screen  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The FEATURES Menu screen will appear.  
Press  
Screen Menu”.  
• Select a desired option for adjustment/setup from  
Adjustment, Function, On Screen Menu, Input  
Terminal and Others.  
or  
to select “On  
3
Press  
• On Screen Menu appears.  
.
On Screen Menu screen  
4
5
6
7
Press  
“Language”.  
or  
to select  
Press  
.
The “Language” selection screen will appear.  
“Language” selection screen  
Press  
language.  
or  
to select the  
Press  
.
8
The menu is displayed in the selected language.  
Press  
when you finish.  
* Repeat steps 3 to 8 when you wish to make changes  
to other options.  
E-38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• FEATURES setup screen has the following 5 options.  
Adjustment  
Function  
: Can make a fine adjustment of pictures such as Dot Clock, Clamp Position.  
: Allows setting of 24-frame mode and Jaggies filter. (See P. E-40.)  
On Screen Menu : Can make a display setting such as OSD, Language. (See P. E-40–E-41.)  
Input Terminal : Can make an input terminal setting such as Video Input. (See P. E-41–E-42.)  
Others  
: Can make other settings. (See P. E-42–E-44.)  
ADJUSTMENT  
Dot Clock, Clock Phase, Clamp Position, and Auto Calibration are adjusted as shown in the following chart.  
Select the item with  
, and then adjust with  
. Finally, press  
to implement the adjustments.  
Adjustment Item  
Contents of Adjustments  
Operation  
Adjustment Range/Remarks  
Dot Clock  
(RGB2, RGB3)  
You may find that pictures blur, depending on the  
clock frequency of your PC’s processor.  
If you experience blurring, you can obtain a clearer  
Use  
to select the optimal value  
–60 to +60  
at which blurring of pictures is  
eliminated.  
picture by adjusting the “Dot Clock”.  
Clock Phase  
(RGB2, RGB3)  
Pictures may blur as the clock phase of your PC  
may be different. In this case, adjust the clock  
phase manually. Normally, the automatic setting  
ensures the optimal value.  
Use  
to select the optimal value  
Auto/Manual  
Manual: 1 to 32  
at which blurring of pictures is  
eliminated.  
Clamp Position  
(RGB2, RGB3,  
Comp.video)  
Adjusts the clamp position in accordance with the  
input signal received from connected equipment.  
Normally, the automatic setting ensures the optimal  
value.  
Use  
to select the optimal value.  
–8 to +8  
Auto Calibration Adjusts the dynamic range of images to the  
Display the Auto Calibration screen  
and select Execute, and then use  
to select the item.  
Execute/Cancel  
(RGB2, RGB3)  
optimum. Performed while a white screen signal is  
received.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)  
FUNCTION  
• Displaying the optimum movie pictures (24 Frame Mode)  
for Video  
Can make the optimum display of 24 frames/second signals such as movie pictures.  
Each time you press or , one of the available choices appears in the following sequence:  
On Off  
On : Displays the optimum movie pictures.  
Off : Displays normal pictures.  
Press  
to store.  
* Some type of signal can not be selected.  
• Jaggies Filter  
for Video  
Reduces the phenomenon where the moving diagonal lines look jagged when an interlace signal is  
input. This allows a more smoothly moving picture to be displayed.  
Each time  
is pressed, the setting is switched.  
Off  
On  
On: Jagging reduction is ON.  
Off: Jagging reduction is OFF.  
Press  
to store.  
* During special playback of video, or when the signals are weak, the screen may be disturbed. In  
this case, set to “OFF”.  
ON SCREEN MENU  
• Setting Display Information (OSD)  
You can use this option to select whether to display information other than menus. (Error messages  
are displayed regardless of what choice you make for this option.)  
Each time you press or , one of the available choices appears in the following sequence:  
On (OSD:bright): On-screen information shown in light color.  
On (OSD:dark): On-screen information shown in dark color.  
OSD selection screen  
Off: Except for menus and error messages, on-screen information is not displayed.  
Press  
to store.  
• Selecting Language (Language)  
You can use this option to select the language displayed on the screen.  
(1) Select “Language” and press  
The “Language” selection screen will appear.  
(2) Press or to select your desired language.  
.
日本語 (Japanese)  
English  
Deutsch (German)  
Español (Spanish)  
Français (French)  
Italiano (Italian)  
Português (Portuguese)  
"Language" selection screen  
(3) Press  
.
The menu is displayed in the selected language.  
E-40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Selection of indications  
You can change the settings for indications for video inputs and RGB inputs.  
Video input  
You can change the settings for indications for the VIDEO1 – 6 inputs.  
Select the desired indication in accordance with the connected equipment.  
Each time  
is pressed, the setting is switched. (In the case of VIDEO1)  
Press  
to store.  
RGB input  
You can change the settings for indications for the RGB 1 – 3 inputs.  
Select the desired indication in accordance with the connected equipment.  
Each time  
is pressed, the setting is switched. (In the case of RGB 1)  
Press  
to store.  
SETTING THE INPUT TERMINALS  
Settings can be made for the video input terminals. Press  
and select which of the video terminals VIDEO1 – 4  
that you want to set. Then press  
.
• Video input  
Select the video input format.  
Each time  
is pressed, the setting is switched.  
Auto:  
The terminal to which the signal is input is automatically recognized.  
Other than Auto: Select the desired input.  
Press to store.  
* When Auto is selected, and multiple inputs are present, the inputs will have priority in the order of  
Component Video, S-video, and Video.  
* Component video input is not made to Video 3.  
• Selecting Video Mode (Video Input)  
You can use this option to select the desired video mode of pictures it will receive to the Video Input terminal.  
Each time you press or , one of the available modes appears in the following sequence:  
Auto1: Automatically selects NTSC, PAL and SECAM.  
Auto2: Automatically selects NTSC and M-PAL.  
Other than Auto: You need to select a system appropriate to the input signal.  
Press  
to store.  
• DVI Input  
You can select the signal method input to the DVI input terminal.  
Each time or is pressed, the setting is changed.  
DVI1  
DVI2  
DVI1: Used when connecting to a PC.  
DVI2: Used when connecting to a DVD player or digital tuner.  
Press  
to store.  
* Set according to the signal method before connecting peripheral device.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)  
OTHER SETTINGS  
• Power saving settings  
Function to prevent the TV from staying on if you forget to turn it off.  
Auto Off-UNTOUCH  
Each time  
is pressed, the setting is switched.  
Off  
On  
Off: Power is not turned off automatically.  
On: If no operation has taken place for 3 hours, the power supply is automatically placed in the  
standby mode.  
Power saving settings screen (RGB mode)  
Press  
to store.  
Auto Off-NO SIG.  
Each time  
is pressed, the setting is switched.  
Off  
On  
Off:Power is not turned off automatically.  
On: If there is no video signal for 10 minutes, the power supply is automatically placed in the  
standby mode.  
Press  
to store.  
Power saving settings screen (VIDEO  
mode)  
DPMS  
for RGB  
You can use this option to select the amount of time before the DPMS function starts.  
DPMS (which stands for “display power management signaling”) allows the display to maintain an  
automatic power saving function.  
This function causes on-screen information to disappear until the next input operation, if the power  
is ON and the display has not received any signals for the predetermined period of time. When  
DPMS is active, the power indicator lamp turns orange.  
(1) Select DPMS and press  
DPMS screen appears.  
.
DPMS selection screen  
(2) Press  
or  
to select Time.  
(3) Each time you press or , one of the available choices appears in the following sequence:  
Off:  
Disables DPMS  
Number: Approximate time before DPMS starts. (Unit: minutes)  
* The power indicator lamp turns orange while the DPMS is ON.  
* The power turns ON automatically when the display receives a signal.  
(4) Can specify background colour.  
Press  
Each time you press or , one of the available choices appears in the following sequence:  
Black White  
or  
to select background colour.  
Black: Mutes images in Black background.  
White:Mutes images in White background.  
* Switches approx. 20 seconds after the display stops receiving signals.  
(5) Press  
to store.  
E-42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Minimizing phosphor burn-in (Screen Orbiter)  
for RGB  
You can use this option to move the screen position to minimize phosphor-induced “burn-in”.  
Follow the steps below.  
(1) Select “Screen Orbiter” and press  
The “Screen Orbiter” setting screen will appear.  
(2) Press or to select “Mode/Time”.  
.
(3) Select a desired pattern.  
“Screen Orbiter” setting screen  
Each time you press or , one of the available choices appears in the following sequence:  
Off: Disables Screen Orbiter.  
Time: Moves the pattern approximately every one hour.  
Mode: Moves the pattern when the power is turned ON or when you switch between modes.  
(4) Press  
or  
to select “Moving Area”.  
(5) Press or to select the range for moving the pattern.  
Each time you press or , one of the available choices appears in the following sequence:  
Min.: Pattern moves in small range. (About 5 pixels)  
Std.: Pattern moves in moderate range. (About 10 pixels)  
Max.: Pattern moves in wide range. (About 15 pixels)  
(6) Press  
to store.  
* When the Screen Orbiter function is operated in RGB1 mode, some letters at the top, bottom,  
right or left of the screen may be missed.  
• Setting RGB Input Signal Compulsorily (Direct Setting)  
You can use this option to switch the setting for RGB input signal.  
Each time you press or , one of the available choices appears in the  
following sequence:  
for RGB  
For RGB1 mode:  
For RGB2 or 3 mode:  
Auto: The optimum display is obtained automatically for input signals.  
Others: The optimum resolution setting is fixed for each signal.  
Press  
to store.  
* In Auto mode, the resolution of VGA, WVGA, 480P, XGA and WXGA may not be automatically  
distinguished. Switch to the fixed display when the image is not displayed properly.  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER ADJUSTMENTS (FEATURES MENU) (Continued)  
• Specifying RGB Input Signal (Code Setting)  
for RGB2, RGB3  
You can use this option to specify and display the type of RGB input signal by code number.  
Each time you press or , one of the available choices appears in the following  
sequence:  
Auto  
Manual  
Auto: Automatically displays the input signal to the optimum.  
Manual: Selects RGB code number.  
“Code Setting” setting screen  
Press  
to store.  
* In Auto mode, the optimum resolution may not be set up automatically depending on the type of  
signal.  
Select the type of signal when the image is not displayed properly.  
However, note that when the type of signal is selected directly, the signal of other resolution may  
not be displayed properly.  
• Displaying white over entire screen (White Screen)  
You can use this option to display white over the entire screen to minimize phosphor burn-in.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
Off: Does not display white.  
On: Displays a white screen immediately.  
Press  
to store.  
• Setting Exhibition Mode (Exhibition Mode)  
You can use this option to display the enhanced contrast, which is most suitable for the use by  
unspecified persons.  
Each time you press or , one of the available choices appears in the following sequence:  
On  
Off  
On: Sets up Exhibition mode.  
Off: Sets up normal mode.  
Press  
to store.  
* In Exhibition mode, the display returns to the original setting in about 5 minutes even if the  
adjustment is changed.  
* The setup will be cancelled when removing the power plug from the receptacle.  
• Illumination  
You can to select to display a blue illumination on the front of the tuner.  
Each time or is pressed, the setting is changed.  
Off  
On  
Off: Illumination is turned off.  
On: Illumination is turned on.  
Press  
to store.  
• Displaying System Status (Information)  
Information screen (Video Mode)  
Displays system operation status.  
Select “Information” and press  
.
The “Information” screen will appear.  
Mode:  
Input mode appears at the upper right corner of the screen.  
Freq. Scan Mode: Frequency scanning  
Input Signal:  
Input Sync.:  
Freq.:  
Video mode  
Signal type  
Frequency and polarity (fH, fV)  
RGB code number  
Information screen (RGB Mode)  
Preset No.:  
* On-screen information disappears if you do not take any action for about 60 seconds.  
E-44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INITIALIZATION OF USER ADJUSTMENT VALUE (FACTORY DEFAULT)  
You can restore the values of the adjustment/setting made in the MENU to factory settings.  
Press  
.
1
2
The main menu screen will appear.  
Press  
or  
to select “FACTORY  
DEFAULT”.  
Each time you press or , one of the available  
menus appears in the following sequence:  
“FACTORY DEFAULT” selected in the  
main menu screen  
PICTURE  
POSITION/SIZE  
AUDIO  
FEATURES  
FACTORY DEFAULT  
The FACTORY DEFAULT Menu screen will  
appear.  
Press  
.
3
• Displays the message of whether to proceed  
with the initialization.  
Press  
Yes.  
or  
to select the  
4
5
Displays the message of whether to  
proceed the initialization  
Press  
.
• The message of having completed the  
initialization will be displayed after initializing.  
Press  
when you finish.  
Displays the message of having  
completed the initialization  
E-45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPTIONS  
Wall-mounting unit  
0° to 15° mounting angle  
P-WB4200  
P-CT4200  
P-TT4200  
Hanging unit  
0° to 15° mounting angle  
Stand  
Speaker  
P-SP4200  
(1 set of 2 speakers)  
Speaker Stand  
P-ST4200  
(1 set of 2 speakers stands)  
* When installing an option, make sure that all installation requirements for that option (as given in the relevant instruction manual) are met.  
* The colors of options do not match the display colors perfectly.  
Warning  
To prevent injury, fire, and electric shock, arrange for options to be initially installed (or installed at a different location) by your dealer.  
CAUTION: This display (P42HHS10) is for use only with Fujitsu General Limited’s option (P-WB4200,  
P-CT4200, P-TT4200).  
Using this display with other option can cause instability resulting in possible injury.  
E-46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FACTORY SETTINGS  
This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value  
of the first input signal.  
To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-34–E-35 to adjust the  
parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be  
displayed in accordance with the settings you most recently selected.  
Main corresponding signals (RGB mode)  
Display (dots x lines)  
Horizontal frequency (kHz) Vertical frequency (Hz)  
Signal  
DVI-D  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
1280 x 1024  
1280 x 1024  
1600 x 1200  
1600 x 1200  
848 x 480  
852 x 480  
1360 x 768  
720 x 485  
720 x 575  
31.47  
37.50  
43.27  
31.47  
37.88  
46.88  
53.67  
48.36  
60.02  
68.68  
63.98  
79.98  
75.00  
106.25  
31.02  
31.72  
47.71  
15.73  
15.63  
59.94  
75.00  
85.01  
70.09  
60.32  
75.00  
85.06  
60.00  
75.03  
84.99  
60.02  
75.03  
60.00  
85.00  
60.00  
59.97  
60.01  
59.94  
50.00  
VGA  
VGA 75 Hz  
VGA 85 Hz  
400 lines  
SVGA 60 Hz  
SVGA 75 Hz  
SVGA 85 Hz  
XGA 60 Hz  
XGA 75 Hz  
XGA 85 Hz  
SXGA 60 Hz  
SXGA 75 Hz  
UXGA 60 Hz  
UXGA 85 Hz  
60 fields  
50 fields  
* With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make  
sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.  
* In the DVI-D mode, the input signal can be restricted partly.  
In the Comp.video and Video/S-video modes, the display has been factory-set as follows for different input signals:  
Main corresponding signals (Comp.video mode)  
Main corresponding signals (Video, S-video mode)  
Horizontal  
Vertical  
Horizontal  
Vertical  
Signal  
Signal  
NTSC  
frequency (kHz)  
frequency (Hz)  
frequency (kHz)  
frequency (Hz)  
15.73  
15.63  
31.47  
31.25  
45.00  
37.50  
33.75  
28.13  
59.94  
50.00  
59.94  
50.00  
60.00  
50.00  
60.00  
50.00  
SDTV 480I  
SDTV 576I  
SDTV 480P  
SDTV 576P  
HDTV 720P  
HDTV 720P  
HDTV 1080I  
HDTV 1080I  
15.73  
15.63  
15.63  
15.63  
15.63  
15.73  
15.73  
59.94  
50.00  
50.00  
59.52  
50.00  
59.95  
59.94  
PAL  
SECAM  
PAL60  
N-PAL  
M-PAL  
4.43NTSC  
• Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.  
• “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.  
You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-44.)  
• In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.  
• All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.  
E-47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATION  
Selector  
Model  
P-SU4H10W/ P-SU4H10A  
Weight  
4.5 kg / 9.9 lbs  
Outer dimensions  
Power supply  
Current rating  
External equipment terminals  
43.0 (W) x 9.5 (H) x 37.0 (D) cm / 16.9 (W) x 3.7 (H) x 14.6 (D) inch  
110–240 VAC 50/60 Hz  
0.4 A  
Video input terminal 1, 2, 4  
(Component video, S-video  
priority)  
Video: Pin jack 1.0 Vp-p/75 Ω  
S-video: S-video terminal (Y-signal 1.0 Vp-p/75 , C-signal 0.286 Vp-p/75 )  
Component video:  
3 Pin jack terminals  
Y:  
1 Vp-p/75 Ω  
PB/CB: 0.7 Vp-p/75 Ω  
PR/CR: 0.7 Vp-p/75 Ω  
Audio: Pin jack 0.5 Vrms (Left, Right)  
Video input terminal 3  
(S-video priority)  
Video: Pin jack 1.0 Vp-p/75 Ω  
S-video: S-video terminal (Y-signal 1.0 Vp-p/75 , C-signal 0.286 Vp-p/75 )  
Audio: Pin jack 0.5 Vrms (Left, Right)  
Video input terminal 5, 6  
Component video:  
3 Pin jack terminals  
Y:  
1 Vp-p/75 Ω  
PB/CB: 0.7 Vp-p/75 Ω  
PR/CR: 0.7 Vp-p/75 Ω  
Audio: Pin jack 0.5 Vrms (Left, Right)  
RGB input terminal 1  
RGB input terminal 2  
RGB input terminal 3  
Video: DVI terminal (EIA/CEA-861 Compliant)  
Audio: Mini pin jack 0.5 Vrms (Left, Right)  
Video: mD-sub 3 parallel 15-pin 0.7 Vp-p/75 Ω  
Audio: Mini pin jack 0.5 Vrms (Left, Right)  
Video: mD-sub 3 parallel 15-pin 0.7 Vp-p/75 Ω  
Audio: Pin jack 0.5 Vrms (Left, Right)  
Digital audio input terminal 1, 2 Optical input  
Amplifier output terminal  
Analog audio: Pin jack 0.5 Vrms (Left, Right)  
Digital audio  
Output for display  
Display (picture) output terminal  
Display (audio) output terminal  
Operating conditions  
Temperature: 0 to 40 °C / 32 to 104 °F  
Humidity:  
20 to 80 %  
Accessories  
1 remote control, 2AA batteries, 1 power cable  
Regulation ---P-SU4H10W/ P-SU4H10A  
• UL, CSA Safety: UL6500, C-UL  
EMC: FCC Part 15, ICES-003  
• CE Safety: EN60065  
EMC: EN55013  
2001  
1994  
EN55020  
• AS Safety: IEC60065  
EMC: AS/NZS 1053  
E-48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
Model  
P42HHS10W/ P42HHS10A  
Screen size  
42" wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal)  
36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal)  
Aspect ratio  
16:9 (wide)  
Weight  
28.5 kg / 62.8 lbs  
Outer dimensions  
Power supply  
Current rating  
Number of pixels  
Colors  
103.7 (W) x 64.2 (H) x 8.5 (D) cm / 40.8 (W) x 25.3 (H) x 3.3 (D) inch  
110–240 VAC 50/60 Hz  
4.3–1.8 A  
1024 (H) x 1024 (V)  
16.77 million (for each of 256 RGB gradations)  
External equipment terminals  
Video input  
Display (picture) output terminal  
Display (audio) input terminal  
Audio input  
External speaker output terminal Lever terminal, 1 line (L/R)  
Effective max. output: 10 W + 10 W, 6 Ω  
Temperature: 0 to 40 °C / 32 to 104 °F  
Humidity: 20 to 80 %  
1 instruction manual, 1 power cable, 1 System cable (picture), 1 System cable (audio), 2 ferrite cores  
Operating conditions  
Accessories  
Regulation ---P42HHS10W/ P42HHS10A  
• UL, CSA Safety: UL6500, C-UL  
EMC: FCC Part 15 Class B, ICES-003 Class B  
• CE Safety: EN60065  
EMC: EN55022  
EN61000-3-2 1995  
EN61000-3-3 1995  
EN55024 1998  
1998, Class B  
EN61000-4-2 1995  
EN61000-4-3 1996  
EN61000-4-4 1995  
EN61000-4-5 1995  
EN61000-4-6 1996  
EN61000-4-8 1993  
EN61000-4-11 1994  
• AS Safety: IEC60065  
EMC: AS/NZS 3548  
• Specifications and external appearance may be change for the sake of improvement.  
is a worldwide trademark of Fujitsu General Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas.  
E-49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING AND MAINTENANCE  
Precautions  
Cleaning the Cabinet and Remote Control  
Be sure to remove the power plug from the receptacle before  
Use a soft cloth for cleaning.  
cleaning the display.  
If the cabinet or remote control is heavily stained, soak a soft cloth  
in a mixture of water and detergent and squeeze it dry before  
wiping off the stains. Use a soft, dry cloth for final cleaning.  
Be sure not to clean the display using a cloth dampened with  
volatile solvents, such as benzene or thinner. Such solvents can  
harm the display’s cabinet, the filter at the screen front, and the  
remote control. They can also cause paint to come off these  
sections.  
Cleaning the ventilation grille  
Remove dust from the ventilation grille in the rear of the main unit  
periodically with a vacuum cleaner as the accumulated dust can  
increase the internal temperature of the main unit causing machine  
failure or fire hazard.  
Cleaning the Screen  
Clean the screen gently with a soft cloth.  
The screen surface is fragile. Never attempt to clean it with a hard  
material, press on it forcefully, or tap it.  
HANDY TIPS  
In the event of problems with the display, check the following explanations before contacting your dealer for servicing.  
Problem  
• Power does not turn ON.  
• No pictures are displayed.  
Action  
• Check whether the power plug is securely inserted into the receptacle.  
• Check cables for disconnection.  
• Check whether the power for all input equipment is ON.  
• Check for connection to wrong terminals or for wrong input mode.  
• Check whether the input mode display is colored pink.Special setup may have been  
made. Return to original setup or initialize the User adjustment value.  
• Remote control does not function properly. • Check for incorrect battery orientation.  
• Check for dead batteries.  
• Check for distance from the display.  
• Check whether you are pointing the remote control transmitter properly at the display’s  
receiver.  
• Check for any obstacle between the remote control and the display.  
• The display makes a snapping sound.  
• The display makes a buzzing sound.  
• There are spots on the screen.  
• Degraded colors/tints  
• This sound is produced when the cabinet expands or contracts due to variations in  
temperature. This sound does not indicate that the display has a problem.  
• The display has fans to maintain the temperature of internal components at a constant  
level. This sound is produced by the fan as it rotates.  
• Check whether your AV equipment is affected by interference from automobiles, trains,  
high-voltage transmission lines, neon signs or other potential sources of interference.  
• Check whether all picture adjustments have been properly made.  
(See “Adjusting Pictures” on P. E-31–E-33.)  
• Improper screen position/size  
• No sound  
• Check whether screen position and size have been properly adjusted.  
(See “Adjusting Screen Position and Size” on P. E-34–E-35.)  
• Check cables for disconnection.  
• If “Out of range” appears or the screen  
turns black and white, the display is  
receiving a signal whose picture or signal  
cannot be reproduced by the display.  
• Input proper signals.  
Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/  
XGA/UXGA, 75 Hz or less for SXGA.  
• If “Error message Condition 1” appears,  
the fan is defective.  
• Remove the power plug from the receptacle, and contact your dealer for repairs.  
• If “Error message Condition 2” appears,  
the display’s internal components are  
extremely hot.  
• Remove the power plug from the receptacle. (You can turn the power back ON again  
when the components have cooled sufficiently.) If the message appears again when you  
turn the power back on, remove the power plug from the receptacle, and contact your  
dealer for a repairs.  
• If “Change refresh rate to 60Hz” appears,  
• If the power indicator lamp flashes red.  
• The picture may get blurred with vertical frequency of other than 48.3–51.8 or  
58.4–61.4 (Hz). Change the setting of your PC,etc.  
• Remove the power plug from the receptacle, and inform your dealer about how the lamp  
flashed.  
As explained below, the power indicator lamp flashes differently depending on the type  
of problem:  
– Flashes repeatedly: Improper supply voltage level  
– Flashes once: Malfunction by the fan  
– Flashes twice: Excessive temperature  
– Flashes three times or more: Other problems  
E-50  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Dyson Vacuum Cleaner DC17 User Manual
Echo Trimmer 99944200610 User Manual
Edelbrock Automobile Parts 15015 User Manual
Electra Accessories Cooktop 230W I User Manual
Electro Voice Microphone PL70 N D User Manual
Fisher Paykel Gas Heater OR24SDMBGX User Manual
Fluke Power Supply 2625A User Manual
GE Dishwasher Built In Dishwasher User Manual
Generac Power Systems Portable Generator 005221 0 User Manual
Gilson Mixer 59015C User Manual