Fujioh Ventilation Hood BUF 03R User Manual

Installation Manual  
RANGE HOOD  
MODEL:BUF-03R  
TABLE OF CONTENTS  
Safety Instructions .................................................................................................. 2  
Name of Parts ......................................................................................................... 4  
Size & Dimensions .................................................................................................. 4  
Range Hood Location ............................................................................................. 5  
Installation ............................................................................................................... 6  
1. Preparation ..................................................................................................... 6  
2. Range Hood Mounting .................................................................................... 9  
3. Connecting Power Supply Wires ................................................................... 11  
4. Final Assembly and Check............................................................................ 13  
5. Explanation to the End User ......................................................................... 14  
Circuit Diagram ..................................................................................................... 14  
READ AND SAVETHESE INSTRUCTIONS.  
Keep this manual in a convenient place for future reference.  
FUJI INDUSTRIAL CO., LTD.  
1U030981  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION  
1. For general ventilating use only. Do not use to exhaust hazardous or explosive material and  
vapors.  
2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent  
exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages.  
3. Read specification label on this product for further information and requirements.  
4. Use only for the purpose of kitchen ventilation.  
5. Do not install this range hood in the bathroom or in other wet rooms since electrical shock  
and damage may result.  
6. Fasten the filter and other parts securely. Incorrect attachment may result in personal injury  
or property damage.  
7. Keep your hands and other objects away from the fan while it is in motion.The range hood  
may injure you or damage itself.  
NOTE:The safety instructions are explained with the following  
pictographic symbols.  
: means prohibition. It indicates actions, if any, that  
mustn’t be done.  
: means forcible execution. It indicates actions, if any,  
that must be done.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAME OF PARTS  
- Accessories -  
Screw M5×30  
Four (4) pieces  
Nut with plate  
Four (4) pieces  
SIZE & DIMENSIONS  
(Unit : inch)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
RANGE HOOD LOCATION  
The range hood must be installed just above the cooktop.  
1
2
3
4
The minimum distance from the cooking surface to the bottom of the range hood  
must be 24".  
The total weight of the BUF-03R range hood unit is:  
BUF-03R--------18 lbs. (8 kg)  
Power requirements are:  
AC120 V, 60 Hz, 1.8 Amp  
CAUTION  
Check that the hood is correctly installed, since incorrect installation could result  
in the detachment of the range hood and the unit could fall off.  
To protect hands from injury, wear working gloves when installing the range hood.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
1. PREPARATION  
WARNING  
If the range hood is not installed properly, it could become detached and fall off.  
Ensure that the metal duct does not touch other metal housing materials,  
otherwise fire or electric shock could result.  
This range hood can discharge upward  
or backward. According to the conditions  
where the hood is installed, determine  
whether it will discharge vertically or  
horizontally (3¼" × 10" duct). For vertical  
or horizontal discharge, run duct work  
between the hood location and a roof  
cap or wall cap.  
1
For the best results in either directions,  
use a minimum number of transitions  
and elbows. Be sure to attach a roof cap  
or wall cap to avoid leaking rain in the  
end.  
The range hood unit must be mounted to a liner which has the following  
dimensions. Install the liner securely after checking that the opening size of the  
liner is the same as the figure below.  
2
CAUTION  
The liner should be installed tightly. If the liner installation is not correct, the range  
hood unit may become detached and fall off.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
Run house wiring between service panel and hood location.  
Prepare the range hood unit.  
3
4
In case of Vertical Discharge  
(1) The range hood is supplied with the  
exhaust pipe fixed on its top plate.  
(2) Provide a transition duct (not  
supplied) to connect the exhaust  
pipe and external duct. For the size  
of transition duct, refer to Fig. at  
right.  
(3) Be sure to keep 1-3/16" overlapping  
length of the exhaust pipe and  
transition duct when installing.  
(4) Skip to page 9 for mounting the  
range hood.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
In case of Horizontal Discharge  
(1) Referring to Fig. at right, provide  
a rectangular hole in the wall for  
passing through the exhaust pipe.  
(2) Remove the exhaust pipe from the  
top of the range hood.  
NOTE  
Keep 4 screws (M4×8) for fixing the  
exhaust pipe later.  
(3) Detach the cover plate by removing 2  
fixing screws, and attach it as shown  
in Fig.  
(4) Attach the range hood to the liner.  
Refer to page 9 for details.  
(5) Connect the exhaust pipe with the  
duct, then make the duct joint secure  
and air tight using non-flammable  
tape such as duct tape, etc. (not  
supplied)  
(6) Attach the exhaust pipe to the range  
hood with 4 screws (M4×8), from out  
side of the wall.  
(7) Connect the duct to out side wall cap.  
(not supplied)  
CAUTION  
To prevent air or moisture from entering through the wall opening, be sure to install  
wall insulation to seal around duct work completely.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
2. RANGE HOOD MOUNTING  
Hold up the range hood unit and insert it into the opening of the liner. When the 4  
securing plates on both sides have passed through the top of the liner, turn them  
outward to secure the range hood on the liner temporarily. Make sure that the top  
of the exhaust pipe is inserted into the bottom of the transition duct.  
1
Remove 4 screws which are fixed to the front cover. The front cover swings open  
90° as shown in Fig.  
2
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
Disconnect the wire connector between the push switch assembly and wire box,  
then detach the front cover by disengaging its hinge part.  
3
NOTE  
Be careful not to damage the hinge part.  
2
1
Align 4 screw holes of the liner and range hood unit, then fix securely using the  
supplied screws (M5×30) and nuts.  
4
5
NOTE  
Fasten all screws and nuts evenly.  
Make the duct joint secure and air tight  
using non-flammable tape such as duct  
tape, etc. (not supplied)  
NOTE  
Make sure that the shutter installed  
in the exhaust pipe moves freely.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
3. CONNECTING POWER SUPPLY WIRES  
WARNING  
Electrical wiring should be done by a qualified person(s) in accordance with all-  
applicable codes and standards, including fire-rated construction. An unqualified  
person doing the work could result in fire, electric shock or injury.  
This range hood uses 120V AC. Do not connect to other voltage since fire, electric  
shock or damage could result.  
Remove the nut from the conduit connector at  
the end of power wiring.  
1
WARNING  
Be sure to switch power OFF at service panel  
before wiring.  
Remove one screw fixing the wire cover and  
detach it.  
2
Connect the conduit through the connecting hole  
of the body using the nut previously removed.  
3
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
Connect the electrical wires as follows:  
Connect wires tightly and securely using wire connectors (not supplied).  
4
5
Black to Black  
White to White  
Green to Green  
Replace the wire cover with the screw removed previously. Make sure that all  
wires are connected properly and enclosed inside of the wiring compartment.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
4. FINAL ASSEMBLY AND CHECK  
One 40 W light bulb (not supplied) can be mounted to this range hood.  
Prior to final assembly, install a light bulb (ordinary type, in the base diameter  
17 mm), rated 120 V-40 W or below.  
Assembly  
(1) Hang the front cover on the hinge part.  
(2) Connect the wire connector and replace  
the front cover with 4 screws.  
1
CAUTION  
To prevent the screw holes from being damaged, be sure to tighten the screws  
with the torque of 13 inch-lbs. (1.5 N-m) or less.  
Be sure to connect the wire connector rightly. Otherwise, the range hood wont  
work properly.  
Check  
(1) Turn on the electrical circuit to the range hood.  
(2) Make sure that the switch and light operate correctly. Refer to page 4 of the  
Operation Manual.  
(3) Check the ventilating functions at Hi, Me and Lo positions.  
(4) Make sure that the range hood has no abnormal noises and/or vibration.  
2
CAUTION  
To reduce the risk of injury, keep your hands and other objects away from the fan  
while it is in motion.  
Wear working gloves to avoid injury.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION (continued)  
5. EXPLANATION TO THE END USER  
(1) Refer to the Operation Manual, explain the operation of this range hood to end  
users.  
(2) The Installation Manual and Operation Manual should be given to the end user.  
CIRCUIT DIAGRAM  
120V 60Hz  
Motor  
Green  
White Black  
Connector  
Terminal  
Capacitor  
Red  
White  
Orange  
Brown  
Blue  
Red  
Bulb:Max40W  
Connector  
Blue  
Brown  
Orange  
White  
Black  
Green  
Red  
Control Switch  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fuji Industrial USA, Inc.  
16300 Christensen Rd., Ste-212 Seattle,WA 98188-3403  
Telephone: 1-888-547-9880  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Dyson Vacuum Cleaner DC28 User Manual
Euro Pro Carpet Cleaner S3306HB User Manual
Fellowes Paper Shredder 73Ci User Manual
Fisher Price Baby Toy H5924 User Manual
Fisher Price Doll C5352 User Manual
Fisher Price Motorized Toy Car M3865 User Manual
Fujitsu Network Hardware V01 User Manual
Fujitsu Scanner fi 4750L User Manual
Generac Switch 004635 3 User Manual
GE Oven JGRP17BEW User Manual