8288 475 000
Owner’s Manual
Eight channel AD Converter for 24bit / 96kHz
Introduction
The Fostex Model AC2496 is a 24 bit/96kHz compatible (compatible only to S/P DIF)
professional-use 8 channel A/D converter that converts analog input signals to digital
signals (adat or S/P DIF). It can be utilized to increase the number of inputs of Fostex
digital multirecorders D1624/D2424 and for substituting inputs of digital mixers and
personal computers.
Functions of the Model AC2496 can be extended according to the application by em-
ploying an optional Model 8355 (AES/EBU card) and Model 5045 (8 channel AD card).
When the 8355 is installed in an AC2496, it is possible to transmit 24 bit/96kHz digital
signals (8 channels) which is otherwise impossible to transmit in ADAT IN/OUT.
If a 5045 is installed, the 8 channel analog inputs of the AC2496 can be extended to 16
channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Safety instructions..................................................................................................................2
Names and functions of each section..................................................................................4
Main features of theAC2496..................................................................................................5
AC2496 without the option installed.....................................................................................6
AC2496 with the Model 5045 installed.................................................................................6
AC2496 with the Model 8355 installed.................................................................................6
Application examples as Analog - adat converter..............................................................7
Connecting example for 16 track simultaneous recording................................................7
Setup of the AC2496.................................................................................................................7
Application examples as an Analog - S/P DIF converter....................................................8
Connecting example when substituting
the input of personal computers (audio card)................................................8
Setup of the AC2496.................................................................................................................8
Using the AC2496 as a digital master....................................................................................8
Extension example after installing a Model 5045................................................................9
Connecting example for 24 track simultaneous recording................................................9
Setup of the AC2496.................................................................................................................9
Extension example after installing a Model 8355.............................................................10
Connecting example...............................................................................................................10
Setup of the AC2496...............................................................................................................10
Specifications (AC2496 / 5045 / 8355).................................................................................11
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of each section
1
2
4
5
6
7
3
1. Power switch/Power LED
6. Reference level selecting switch
The main power switch for the AC2496.
The power LED (green) will light when power is
switched ON.
This switch selects the reference level (all channels
simultaneously) of the analog input (balance or un-
balance). Both balance and unbalance can be selected
to -20dB/-18dB/-12dB (Refer to <Notes> on the next
page).
2. WORD IN termination switch
This must be switched ON when input signals from
WORD IN is to be terminated by 75 ohms.
7. Analog input mode selecting switch
This switch becomes effective when the DIGITAL FOR-
MAT switch is set to "adat" and if the optional Model
8355 has been installed; the signal applied to the ana-
log input connector can be assigned to the desired
channel. In general, these are selected in accordance
to the number of BUSS OUT of a connected analog
mixer.
3. LOCKED indicator
This will light up when the CLOCK switch is set to
"WORD" and locked onto the external WORD clock.
4. Clock switch
This is for setup of the AC2496 operating clock.
"INT"
Operates by the AC2496 crystal.
<Notes on switching>
"WORD"
Synchronizes with the external WORD clock.
Always switch off the main power to the AC2496
before changing the various selecting switches.
If the switches are manipulated with the main
power switched on, it could create noise.
5. Digital format selecting switch
This selects the digital output format (adat, S/P DIF
or AES/EBU). It can also be selected to 44.1kHz, 48kHz,
88.2kHz or 96kHz (44.1/48kHz only for adat output).
8
9
10
11
12
13
8. Blank panel
12. WORD OUT connector (BNC type)
The AC2496 WORD clock signal for external digital
equipment is output here.
This blank panel is removed when installing the op-
tional Model 8355 (AES/EBU card) or the Model 5045
(8 channel AD card). In regards to installation of the
options, refer to the manual included with the cards.
13. Analog input connector (TRS phone jack)
This is connected to BUSS OUT (or GROUP OUT) of
the analog mixer (Refer to <Note> on the next page).
These connectors can accept both balanced (+4dBu)
and unbalanced (-10dBV) analog signals.
9. DIGITAL OUT 1-8 connectors (Optical)
Digital equipment provided with optical DIGITAL IN
are connected here. The type of digital signals (adat
or S/P DIF) selected by the DIGITAL FORMAT switch
will be output here.
T: HOT
R: COLD
S: GND
10. WORD IN connector (BNC type)
The WORD clock signal from external digital equip-
ment is input here to match the phase with digital
equipment provided with WORD OUT.
<Notes when connecting cables>
When plugging or unplugging the interconnecting
cables, be sure to do so after switching off the power
to the AC2496.
11. AC IN connector
The AC cable included with the AC2496 is connected
here.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Main features of the AC2496
The AC2496 is a professional use high quality 24 bit, 96kHz compatible 8 channel A/D converter for
converting analog signals to digital signals. Conversion to digital signals can be selected for S/P DIF or
adat, depending on the application. Furthermore, by installing the option, it will be possible to also
output AES/EBU format digital signals so it can be used to extend the number of digital multirecorder
analog inputs and to substitute the inputs of digital mixers and audio cards in personal computers.
• Includes with WORD in/out connector
Synchronizing external equipment with the WORD
clock is possible by utilizing this WORD IN/OUT con-
nector.
• Balanced/unbalanced compatible input connectors
Stereo phone jacks that comply to both balanced
(+4dBu) and unbalanced (-10dBV) lines are employed
for the analog inputs (1-8).
• Selecting various digital formats
Four different digital formats can be selected: 24 bit/
44.1kHz, 24 bit/48kHz, 24 bit/88.2kHz and 24 bit/
96kHz. When outputting adat digital signals, how-
ever, it will be limited to 24 bit/44.1kHz and 24 bit/
48kHz.
• Reference level can be set to match the input
The reference level can be set to match the analog
input (balanced or unbalanced line). The reference
level can be chosen from three different levels: -12dB,
-18dB or -20dB. All channels can be switched simul-
taneously.
• Options available for extending functionality
Two exclusive options are available for the AC2496
which further extend the AC2496’s capabilities.
<Notes when setting the reference level>
Be sure to match the equipment level for both
balanced and unbalanced lines in regards to
both the reference level and the analog input
connector of connected equipment.
Model 5045 (8 channel AD card)
This is an 8 channel AD card for extending the AC2496 ana-
log inputs to 16 channels.
For example, if it is used with the REF LEVEL
switch set to balanced line reference level, digi-
tal clipping and low S/N signal may result if an
unbalanced input is connected to the input
connector.
• Optical digital output connector (DIGITAL OUT)
Adat or S/P DIF digital signals (by switch) can be out-
put from the optical (square) digital output connec-
tor. This can be connected to external digital equip-
ment provided with input connectors for adat or S/P
DIF signals.
Model 8355 (8 channel AES/EBU card)
This is an 8 channel AES/EBU card for converting the ana-
log input signal to AES/EBU digital signals. This card makes
it possible to transmit 24 bit/96kHz digital signals that could
not be output in adat format.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• AC2496 without the option installed
In a stock AC2496 without the option installed, analog input signal (1-8) is input as shown below
and output after converting to adat (ch1~8) or S/P DIF (ch1, 2) digital signals. For other appli-
cation methods, please refer to pages 7 and 8.
adat (ch 1-8) or S/P DIF (ch 1, 2) digital signals
Analog input signals (1-8)
• AC2496 with the Model 5045 installed
When the 5045 (8 channel AD card) is installed in the AC2496, the analog inputs will be ex-
tended as shown in the schematic below enabling connection of 8 to 16 channels of input signals.
Digital signals from channels 1-8 and 9-16 will be output (at output of adat digital signals) from
each digital output connector (optical). For other applications, please refer to page 9.
adat (ch 1-8) or S/P DIF (ch 1, 2) digital signals
adat (ch 9-16) or S/P DIF (ch 9, 10) digital signals
Analog input signals (1-8)
Analog input signals (9-16)
• AC2496 with the Model 8355 installed
When the 8355 (8 channel AES/EBU card) is installed in the AC2496, in addition to adat (or S/P
DIF) digital signals, AES/EBU formatted digital signals can be output as shown in the schematic
below. For other applications, please refer to page 10.
AES/EBU formatted digital signals
adat (ch 1-8) or S/P DIF (ch 1, 2) digital signals
Analog input signals (1-8)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Application examples as an Analog-adat converter
As an example in using AC2496 as an analog-adat converter, here it is connected to a Fostex digital
multirecorder D2424 to enable 16 track simultaneous recording. The analog mixer in the connecting
example below will be for 8 BUSS OUT.
• Connecting example for 16 track simultaneous recording
This example demonstrates a standard AC2496 and 16 channels of analog signals being recorded simultaneously.
In this example, the analog signals (1-8) from analog mixer 1 are input to ANALOG INPUT 1-8, while the signals
(1-8) from analog mixer 2 connected to AC2496 are converted to adat digital signals and input to DATA INPUT 9-
16 (or 17-24). Sixteen track simultaneous recording is possible with this procedure.
Analog Mixer-1
<CAUTION>
If it is to be connected to a digital re-
corder -- a D2424 in this case -- having
a WORD OUT port as shown in the ex-
ample, it must always be connected to
(Master)
WORD IN of the AC2496 and WORD
AN
A
A
NLOALGOIGNPIN
U
PTU
B
C
N
E
C[E+4
[
d
+
B4udB
]
u
/
U
]
NLA
C
N
E
C[E-1
[
0
-
d
1
B0VdB]v
]
ANALOG OUTPUT BALANCE
ANALOG OUTPUT BALANCE
[
+4dBu
[
+4dBu
]
/
]
UNBALANCE
/
UNBALANCE
[
-10dBv
[
-10dBV
]
]
clock signals input from the digital re-
corder.
4
3
2
1
5
12
24
11
23
10
22
9
8
7
6
5
4
3
2
1
R
R
E
S
M4O22TE
100Ω
ON OFF
REMOTE
THRU
8
7
6
21
20
19
18
17
16
15
14
13
Also, if WORD clock is to be input to
AC2496, be sure to set the recorder
clock in the "asynchronous mode."
Refer to the recorder Manual for details.
If WORD clock cannot be input, set the
recorder in the "synchronous mode"
and the AC2496 CLOCK switch to "INT."
W
W
INPUT
O
O
R
RD
D
OUTPUT
75Ω
ON OFF
AC-IN
DATA
M
MIDIDII
S
S
C
CSII
S
INPUT
16
OUTPUT
INPUT
OUTPUT
THRU
24
-
17
-
9
8
-
1
24
-
17
8
-
1
CAUTION
16
-
9
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
WORD clock
adat digital signals
(Slave)
<Notes when making connections>
When connecting external equipment
to AC2496, be sure to switch off power
to AC2496. Noise could be created if
cables are plugged in or out while the
power is on.
Analog Mixer-2
• Setup of the AC2496
If the AC2496 is to be used as an analog-adat converter as shown in the previous example, set it up as explained
in the following.
When WORD clock is input
If connecting an 8 BUSS OUT
from the D2424, set the
mixer, set the ANALOG IN-
CLOCK SW to "WORD" and
PUT MODE SW to "1-8."
the terminator switch to "ON."
Set theAC2496 reference level
to match the output level (bal-
anced or unbalanced line) of
to AC2496 before manipu-
any external equipment con-
<Notes at setup>
Be sure to switch off power
lating each selector switch of
the AC2496. If the switches
are manipulated with the
power switched on, it could
create noise.
nected, such as an analog
mixer.
Set this to "ADAT-48" or "ADAT-
44.1," matching the D2424
sampling frequency.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Application examples as an Analog-S/P DIF converter
• Connection example when substituting the input of personal computers (audio card)
An example using an AC2496 as an analog-S/P DIF converter connected to the audio card installed in a personal
computer for converting the analog audio signal to S/P DIF digital signal and recorded.
<Notes on cable connection>
When plugging or unplugging the interconnect-
ing cables be sure to do so only after switching
off the power to the AC2496.
S/P DIF digital signals
Otherwise, noise could result.
Analog signals
• Setup of the AC2496
When the AC2496 is to be used as an Analog-S/P DIF converter, it must be setup as explained below.
<Notes on setup>
When changing the select switches
of AC2496, be sure to do so only
after switching off power to
AC2496.
If WORD clock cannot be in-
put, switch CLOCK SW to
"INT." The terminate switch
can be set to either position.
This switch will have no affect
at output of S/P DIF digital sig-
nals.
Should the switches be manipulated
with power on, it could create noise.
The AC2496 reference level
should be set to match the
analog signal output level that
is connected.
This is set to match the sampling fre-
quency of connected equipment.
For S/P DIF digital signals, it will comply
also to "96kHz."
Using the AC2496 as a digital master
In the explanations up to this point, the AC2496
was used as the slave. In other applications, the
AC2496 can be used as the master.
Digital Equipment
WORD IN
S/P DIF IN (adat IN)
As shown in schematic at right, by applying
WORD clock from the AC2496 WORD OUT port
to digital equipment installed with WORD IN,
such equipment can be synchronized with the
AC2496 WORD clock.
(Slave)
WORD clock
DIGITAL OUT
AC2496
WORD OUT
ANALOG IN
<Note>
(Master)
When using the AC2496 as the master, set its switch
to "INT" and the external digital equipment to "sync
mode."
Analog signals
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Extension example after installing a Model 5045
The 8 analog-input channels of the AC2496 can be extended to 16 channels by installing an optional
Model 5045 8ch A/D card. Such an installation enables 24 track simultaneous recording by using a
D2424 as shown in example below.
• Connecting example for 24 track simultaneous recording
This is an example of installing a Model 5045 in an AC2496. Twenty four channels of analog signals can then be
recorded simultaneously. In this example, analog signals (1-8) from analog mixer 1 are input to ANALOG INPUT
1-8, while signals from analog mixer 2/3 (1-8, 9-16) connected to the AC2496 are converted to adat digital
signals and applied to DATA INPUT 9-16 and 17-24. Using this procedure, it is possible to simultaneously record
24 tracks.
Analog Mixer-1
Analog signals (1-8)
AN
A
A
NLOALGOIGNPIN
U
PT
B
C
N
E
C[E+4
d
+
B4udB
]
u
/
U
/N
U
B
NABLANLA
C
N
E
C[E-1[0
-
d
1
B0VdB]v
]
ANALOG OUTPUT BALANCE
ANALOG OUTPUT BALANCE
+4dBu
[
+4dBu
/
]
UNBALANCE
/
UNBALANCE
-10dBv
[
-10dBV
]
4
3
2
1
5
12
24
11
23
10
22
9
8
7
6
5
4
3
2
1
R
E
MOTE
100Ω
ON OFF
REMOTE
THRU
8
7
6
21
20
19
18
17
16
15
14
13
W
W
O
O
R
RD
D
INPUT
OUTPUT
75Ω
ON OFF
AC-IN
DATA
M
MIDIDII
S
S
C
CSII
S
INPUT
16
OUTPUT
INPUT
OUTPUT
THRU
24
-
17
-
9
8
-
1
24
-
17
8
-
1
16
-
9
CAUTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
AVIS:
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
(Master)
(Slave)
adat digital signal (9-16)
WORD clock
adat digital signal (1-8)
Analog Mixer-3
Analog Mixer-2
• Setup of the AC2496
The same as the previous example, when using an AC2496 as an Analog-adat converter, it must be setup as
follows:
If WORD clock is input from a
D2424, the CLOCK SW must
be set to "WORD" and the ter-
minate SW to "ON."
If an 8 BUSS OUT mixer is to
be connected, set the ANA-
LOG INPUT MODE SW to "1-
8."
Set theAC2496 reference level
to match the output level (bal-
anced/unbalanced line) of ex-
ternal equipment connected
such as an analog mixer.
Set to "ADAT-48" or "ADAT-
44.1" to match the D2424
sampling frequency.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Extension example after installing a Model 8355
When the optional Model 8355 (8ch AES/EBU card) is installed, the AC2496 can be utilized as an
analog-AES/EBU converter. Unlike the previous example, this setup can output 24 bit 88.2kHz/24 bit
96kHz digital signals.
WORD clock
• Connecting example
In compliance to the DIGI-
Digital equipment installed with
AES/EBU input ports
(Refer to explanation below)
TAL FORMAT switch set-
ting, adat or S/P DIF digital
signals will also be output.
AES/EBU digital signal
PIN assignments
Pin 1 = GND
Analog Inputs (1-8)
Pin 2 = HOT
Pin 3 = COLD
• Set of the AC2496
If WORD clock is input from
digital equipment, set the
CLOCK SW to "WORD" and
the terminate SW to "ON."
This is switched in accor-
dance to the analog input type
(Refer to explanation below).
Set theAC2496 reference level
to match the output level (bal-
anced/unbalanced line) of ex-
ternal equipment connected
such as an analog mixer.
If it is to be set to 44.1kHz and
48kHz, it is okay to set to FS for
ADAT or S/P DIF.
However, digital signals (adat or
S/P DIF) corresponding to the set-
ting will be output from the optical
DIGITAL OUT connector.
Set FS (44.1/48/88.2/96kHz)
to match the equipment con-
nected. Above is an example
of setting to 96kHz.
The AES/EBU format output signals are output from each connector as shown below in compliance
to the front panel setting ANALOG INPUT MODE switch.
Two channels each of the signals applied to in-
puts 1-8 will be output in theAES/EBU format from
their respective output connectors.
Signals applied to inputs 1 and 2 will be output in
the AES/EBU format from output connectors 1-2,
3-4, 5-6 and 7-8.
Signals applied to inputs 1-4 will be output in the
AES/EBU format from output connectors 1-2 and
3-4 (5-6 and 7-8).
ch1/2
ch1/2 ch1/2
ch1/2
ch3/4
ch1/2
ch3/4
ch1/2
ch1/2
ch5/6
ch7/8
ch3/4
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (AC2496 / 5045 / 8355)
Input/output:
0dBu = 0.775Vrms, 0dBV = 1Vrms
Reference level:
-12dB / -18dB / -20dB switchable
Balanced (+4dBu) / Unbalanced (-10dBV) Switchable
• ANALOG input (AC2496 / 5045)
Connector
: ø 6mm TRS phone jack (balanced)
: 10kΩ or more
Input Impedance
Standard Input Level
: +4dBu (balanced)
: -10dBV (unbalanced)
• DIGITAL output (AC2496 / 5045)
Connector
: Optical
Output Format
: IEC 60958 (S/P DIF)
: Alesis Proprietary Multi Channel Optical Digital Interface (adat)
• AES/EBU output (8355)
Connector
: XLR-3-31 type (Pin 2: Hot)
: IEC 60958 (AES/EBU)
Output Format
• WORD input (AC2496)
Connector
: BNC type
Input Level
: TTL level (included 75Ω terminate switch)
• WORD output (AC2496)
Connector
: BNC type
: TTL level
Output Level
• Sampling Freq./Quantization
: 24bit / 44.1kHz, 24bit / 48kHz, 24bit / 88.2kHz, 24bit / 96kHz
(88.2/96kHz: S/P DIF output only)
• A/D
: 24bit 128 times, over sampling, Delta-Sigma
• S/N
: 110dB (TYPICAL)
• Total Harmonic Distortion
• Power Supply (AC2496)
• Power Consumption (AC2496)
• Dimensions (AC2496)
• Weight (AC2496)
: 0.002% (TYPICAL)
: 120VAC 60Hz, 230V ~ 50/60Hz (AC inlet type)
: 18W
: 482 (W) x 44 (H) x 220 (D) mm
: 2kg
• To facilitate product improvement, specifications and appearance are subject to change without
notice.
• Adat and the
symbol are trademarks of Alesis Corporation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of EC Directive
This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member
nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC)
- Directive on approximation of member nation's ordinance concerning electric equipment designed to be used
within the specified voltage range.
The Affect of Immunity on This Equipment
The affect of the European Specification EN50082-1 (coexistence of electromagnetic waves - common
immunity specification) on this equipment are as shown below.
* In the electrical fast transient/burst requirements, surge, conducted disturbances by radio-frequency fields,
power frequency magnetic field, radiate electromagnetic field requirements and static electricity discharging
environment, this could be affected by generation of noise in some cases.
FOSTEX DISTRIBUTORS LIST IN EUROPE
* Including non-EU countries.
* underlined: contracted distributors (as of August, 2000)
<AUSTRIA>
NAME: ATEC Audio-u. Videogeraete VertriebsgesmbH.
ADD: Im Winkel 5, A-2325 Velm, Austria
TEL: (+43) 2234-74004, FAX: (+43) 2234-74074
<ITALY>
NAME: General Music S. p. A.
ADD:Via delle Rose, 12 S. Giovanni M. (RN), Italy
TEL: (+39) 0541-959511, FAX: (+39) 0541-957404
<BELGIUM>
<THE NETHERLANDS>
NAME: EML Sound Industries NV
ADD: Bijvennestraat 1A, B3500 Hasselt, Belgium
TEL: (+32) 11-232355, FAX: (+32) 11-232172
NAME: IEMKE ROOS AUDIO B. V.
ADD: Kuiperbergweg 20, 1101 AG Amsterdam, The Netherlands
TEL: (+31) 20-697-2121, FAX: (+31) 20-697-4201
<DENMARK>
NAME: SC Sound ApS
<NORWAY>
NAME: Siv. Ing. Benum A/S
ADD: Malervej 2, DK-2630 Taastrup, Denmark
TEL: (+45) 4399-8877, FAX: (+45) 4399-8077
ADD: P. O. Box 145 Vinderen, 0319 Oslo 3, Norway
TEL: (+47) 22-139900, FAX: (+47) 22-148259
<FINLAND>
NAME: Noretron Oy Audio
ADD: P. O. Box 22, FIN-02631 Espoo, Finland
TEL: (+358) 9-5259330, FAX: (+358) 9-52593352
<PORTUGAL>
NAME: Caius - Tecnologias Audio e Musica, Lda.
ADD: Rua de Santa Catarina, 131 4000 Porto, Portugal
TEL: (+351) 2-2086009/2001394,
FAX: (+351) 2-2054760/2087488
<FRANCE>
NAME: Musikengro
<SPAIN>
ADD: ZAC de Folliouses, B. P. 609, 01706 Les Echets, France
TEL: (+33) 472 26 27 00, FAX: (+33) 472 26 27 01
NAME: Multitracker, S. A.
ADD: C/Garcilaso No.9, Madrid 28010, Spain
TEL: (+34) 91-4470700, 91-4470898, FAX: (+34) 91-5930716
<GERMANY>
NAME: Studio sound & Music GmbH
<SWEDEN>
ADD: Industriestrasse 20, D-35041 Marburg, F. R. Germany
TEL: (+49) 6421-92510, FAX: (+49) 6421-925119
NAME: Professional Television AB
ADD: Kavallerivagen 24, 172 48 Sundbyberg, Sweden
TEL: (+46) 8-59798000, FAX: (+46) 8-59798001
<GREECE>
NAME: Bon Studio S. A.
<SWITZERLAND>
ADD: 6 Zaimi Street, Exarchia, 106.83 Athens, Greece
TEL: (+30) 1-3809605-8, 3302059, FAX: (+30) 1-3845755
NAME: Audio Bauer Pro AG
ADD: Bernerstrasse-Nord 182, CH-8064 Zurich, Switzerland
TEL: (+41) 1-4323230, FAX: (+41) 1-4326558
<ICELAND>
<UK>
NAME: SCV London
ADD: 3A 6-24 Southgate Road, London N1 3JJ, England, UK
TEL: (+44) 171-923-1892, FAX: (+44) 171-241-3644
NAME: I. D. elrf. electronic Ltd.
ADD: ARMULA 38 108 REYKJAVIK, ICELAND
TEL: (+354) 588 5010, FAX: (+354) 588 5011
FOSTEX CORPORATION
3-2-35, Musashino, Akishima-shi, Tokyo, Japan 196-0021
FOSTEX AMERICA
15431, Blackburn Ave., Norwalk, CA 90650, U. S. A.
© PRINTED IN JAPAN DEC. 2000 8288 475 000 FX
Download from Www.Somanuals.com. All Manuals Search And Download.
|