Fortinet Network Hardware Fortianalyzer 4000B User Manual

FortiAnalyzer-4000B®  
Rack and Hardware Install Guide  
Version 4.0 MR2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Identifying the Inner Rack Rails . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Installing the Inner Rails on the Chassis . . . . . . . . . . . . . . . . . . . . . . 10  
Installing the Outer Rails onto a Rack . . . . . . . . . . . . . . . . . . . . . . . 11  
Installing the Chassis into a Rack . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Welcome and thank you for selecting Fortinet products for your network protection.  
Fortinet® ASIC-accelerated multi-threat security systems improve network security, reduce  
network misuse and abuse, and help you use communications resources more efficiently  
without compromising the performance of your network. Fortinet systems are ICSA-  
certified for Antivirus, Firewall, IPSec, SSL-TLS, IPS, Intrusion detection, and AntiSpyware  
services.  
Fortinet systems are dedicated, easily managed security devices that deliver a full suite of  
capabilities including:  
Application-level services such as virus protection, intrusion protection, spam filtering,  
web content filtering, IM, P2P, and VoIP filtering  
Network-level services such as firewall, intrusion detection, IPSec and SSL VPN, and  
traffic shaping  
Management services such as user authentication, logging, reporting with  
FortiAnalyzer, administration profiles, secure web and CLI administrative access, and  
SNMP.  
The Fortinet security system uses Fortinet’s Dynamic Threat Prevention System  
(DTPS™) technology, which leverages breakthroughs in chip design, networking, security  
and content analysis. The unique ASIC-accelerated architecture analyzes content and  
behavior in real-time, enabling key applications to be deployed right at the network edge  
where they are most effective at protecting your networks.  
This chapter contains the following topics:  
Registering your Fortinet product  
Before you begin, take a moment to register your Fortinet product at the Fortinet Technical  
Support web site, https://support.fortinet.com.  
Many Fortinet customer services, such as firmware updates, technical support, and  
FortiGuard Antivirus and other FortiGuard services, require product registration.  
For more information, see the Fortinet Knowledge Center article Registration Frequently  
Customer service and technical support  
Fortinet Technical Support provides services designed to make sure that your Fortinet  
products install quickly, configure easily, and operate reliably in your network.  
To learn about the technical support services that Fortinet provides, visit the Fortinet  
Technical Support web site at https://support.fortinet.com.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Fortinet documentation  
Introduction  
You can dramatically improve the time that it takes to resolve your technical support ticket  
by providing your configuration file, a network diagram, and other specific information. For  
a list of required information, see the Fortinet Knowledge Center article What does  
Fortinet documentation  
The Fortinet Technical Documentation web site, http://docs.fortinet.com, provides the  
most up-to-date versions of Fortinet publications, as well as additional technical  
documentation such as technical notes.  
In addition to the Fortinet Technical Documentation web site, you can find Fortinet  
technical documentation on the Fortinet Tools and Documentation CD, and on the Fortinet  
Knowledge Center.  
Fortinet Tools and Documentation CD  
Many Fortinet publications are available on the Fortinet Tools and Documentation CD  
shipped with your Fortinet product. The documents on this CD are current at shipping  
time. For current versions of Fortinet documentation, visit the Fortinet Technical  
Documentation web site, http://docs.fortinet.com.  
Fortinet Knowledge Center  
The Fortinet Knowledge Center provides additional Fortinet technical documentation,  
such as troubleshooting and how-to-articles, examples, FAQs, technical notes, a glossary,  
and more. Visit the Fortinet Knowledge Center at http://kb.fortinet.com.  
Comments on Fortinet technical documentation  
Please send information about any errors or omissions in this or any Fortinet technical  
document to [email protected].  
Conventions  
Fortinet technical documentation uses the conventions described below.  
IP addresses  
To avoid publication of public IP addresses that belong to Fortinet or any other  
organization, the IP addresses used in Fortinet technical documentation are fictional and  
follow the documentation guidelines specific to Fortinet. The addresses used are from the  
private IP address ranges defined in RFC 1918: Address Allocation for Private Internets,  
CLI constraints  
CLI constraints, such as <address_ipv4>, indicate which data types or string patterns  
are acceptable input for a given parameter or variable value. CLI constraint conventions  
are described in the CLI Reference document for each product.  
Notes, Tips and Cautions  
Fortinet technical documentation uses the following guidance and styles for notes, tips  
and cautions.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Introduction  
Conventions  
Tip: Highlights useful additional information, often tailored to your workplace activity.  
Note: Also presents useful information, but usually focused on an alternative, optional  
method, such as a shortcut, to perform a step.  
Caution: Warns you about commands or procedures that could have unexpected or  
undesirable results including loss of data or damage to equipment.  
Typographical conventions  
Fortinet documentation uses the following typographical conventions:  
Table 1: Typographical conventions in Fortinet technical documentation  
Convention  
Example  
Button, menu, text box, From Minimum log level, select Notification.  
field, or check box label  
CLI input  
config system dns  
set primary <address_ipv4>  
end  
CLI output  
FGT-602803030703 # get system settings  
comments  
opmode  
: (null)  
: nat  
Emphasis  
HTTP connections are not secure and can be intercepted by  
a third party.  
File content  
<HTML><HEAD><TITLE>Firewall  
Authentication</TITLE></HEAD>  
<BODY><H4>You must authenticate to use this  
service.</H4>  
Hyperlink  
Keyboard entry  
Type a name for the remote VPN peer or client, such as  
Central_Office_1.  
Navigation  
Publication  
Go to VPN > IPSEC > Auto Key (IKE).  
For details, see the FortiGate Administration Guide.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Conventions  
Introduction  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rack and Hard Drive Installation  
Instructions  
The FortiAnalyzer-4000B comes with a sliding rail kit. Use the instructions below to install  
the rails.  
Caution: Only trained service technicians are authorized to remove the system cover and  
access any of the components inside the system. Before you begin, review the safety  
instructions that came with the system.  
Installing Hard Drives  
Removing Hard Drive Trays from the Chassis  
To remove a hard drive tray from the chassis  
1 Press the release button on the drive tray. This extends the drive bay handle.  
2 Use the handle to pull the drive out of the chassis.  
Figure 1: Removing the hard drive.  
2
1
The drives are mounted in drive trays to simplify their installation and removal from the  
chassis. These trays also help promote proper airflow for the drive bays.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Installing Hard Drives  
Rack and Hard Drive Installation Instructions  
Figure 2: Chassis drive tray.  
Dummy drive  
Drive tray  
Note: Except for short periods of time (swapping hard drives), do not operate the server  
with the hard drives empty.  
Installing a Hard Drive to the Hard Drive Tray  
To install a hard drive into the hard drive tray  
1 Remove the two screws securing the dummy drive to the drive tray and remove the  
dummy drive. Place the hard drive tray on a flat surface such as a desk, table or work  
bench.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Rack and Hard Drive Installation Instructions  
Installing Hard Drives  
Figure 3: Removing dummy drive from tray.  
2 Slide the hard drive into the tray with the printed circuit board side facing down.  
Figure 4: Installing the hard drive into the tray.  
SATA hard  
drive  
Drive tray  
3 Carefully align the mounting holes in both the drive tray and the hard drive.  
4 Secure the hard drive to the tray using six screws.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rack Installation  
Rack and Hard Drive Installation Instructions  
5 Replace the drive tray into the chassis. Make sure to close the drive tray handle to lock  
the drive tray into place.  
Figure 5: Installing the hard drive in the chassis.  
Rack Installation  
Overview  
This chapter provides a quick setup checklist to get your chassis up and running.  
Following these steps in the order given should enable you to have the system operational  
within a minimum amount of time.  
Unpacking the System  
You should inspect the box the chassis was shipped in and note if it was damaged in any  
way. If the chassis itself shows damage you should file a damage claim with the carrier  
who delivered it.  
Decide on a suitable location for the rack unit that will hold your chassis. It should be  
situated in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical  
noise and electromagnetic fields are generated. You will also need it placed near a  
grounded power outlet. Be sure to read the Rack and Server Precautions in the next  
section.  
Preparing for Setup  
The box your chassis was shipped in should include two sets of rail assemblies, two rail  
mounting brackets and the mounting screws you will need to install the system into the  
rack. Read this section in its entirety before you begin the installation procedure outlined in  
the sections that follow.  
Choosing a Setup Location  
Leave enough clearance in front of the rack to enable you to open the front door  
completely (~25 inches).  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Rack and Hard Drive Installation Instructions  
Rack Installation  
Leave approximately 30 inches of clearance in the back of the rack to allow for sufficient  
airflow and ease in servicing.  
Warnings and Precautions!  
This product is for installation only in a Restricted Access Location (dedicated equipment  
rooms, service closets and the like).  
Rack Precautions  
Ensure that the leveling jacks on the bottom of the rack are fully extended to the floor with  
the full weight of the rack resting on them.  
In single rack installation, stabilizers should be attached to the rack.  
In multiple rack installations, the racks should be coupled together.  
Always make sure the rack is stable before extending a component from the rack.  
You should extend only one component at a time - extending two or more simultaneously  
may cause the rack to become unstable.  
General Server Precautions  
Review the electrical and general safety precautions that came with the components you  
are adding to your chassis.  
Determine the placement of each component in the rack before you install the rails.  
Install the heaviest server components on the bottom of the rack first, and then work up.  
Use a regulating uninterruptible power supply (UPS) to protect the server from power  
surges, voltage spikes and to keep your system operating in case of a power failure.  
Allow the hot plug hard drives and power supply modules to cool before touching them.  
Always keep the rack's front door and all panels and components on the servers closed  
when not servicing to maintain proper cooling.  
Rack Mounting Considerations  
Ambient Operating Temperature  
If installed in a closed or multi-unit rack assembly, the ambient operating temperature of  
the rack environment may be greater than the ambient temperature of the room.  
Therefore, consideration should be given to installing the equipment in an environment  
compatible with the manufacturer’s maximum rated ambient temperature (Tmra).  
Reduced Airflow  
Equipment should be mounted into a rack so that the amount of airflow required for safe  
operation is not compromised.  
Mechanical Loading  
Equipment should be mounted into a rack so that a hazardous condition does not arise  
due to uneven mechanical loading.  
Circuit Overloading  
Consideration should be given to the connection of the equipment to the power supply  
circuitry and the effect that any possible overloading of circuits might have on overcurrent  
protection and power supply wiring. Appropriate consideration of equipment nameplate  
ratings should be used when addressing this concern.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Rack Mounting Instructions  
Rack and Hard Drive Installation Instructions  
Reliable Ground  
A reliable ground must be maintained at all times. To ensure this, the rack itself should be  
grounded. Particular attention should be given to power supply connections other than the  
direct connections to the branch circuit (i.e. the use of power strips, etc.).  
Rack Mounting Instructions  
Rack Rails Assembly  
This section provides information on installing the SC846 chassis into a rack unit with the  
rails provided. There are a variety of rack units on the market, which may mean that the  
assembly procedure will differ slightly. You should also refer to the installation instructions  
that came with the rack unit you are using.  
Note: This rail will fit a rack between 27" and 34.45" deep.  
Caution: The left and right rails differ from each other. Do not exchange their inner rails.  
Caution: Keep the ball bearing shuttle locked at the front of the middle rail during  
installation.  
Caution: A minimum of two people are required for safe installation of the chassis.  
To install the unit on the rack  
1 Pull the inner rail out of the outer rail until it is fully extended.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Rack and Hard Drive Installation Instructions  
Rack Mounting Instructions  
Figure 6: Pulling the inner rail out of the outer rail until it is fully extended and pressing  
the locking tab down.  
PULL  
2 Press the locking tab down to release the inner rail. See the locking tab in Figure 6.  
Figure 7: Releasing the inner rail.  
Outer rail  
Middle rail  
Inner rail  
3 Place the inner rail firmly against the side of the chassis. Make sure that the hooks  
straight and aligned with the holes in the inner rail. See Figure 8 (1).  
4 Slide the inner rail forward until it clicks into the locked position. See Figure 8 (2)  
5 Secure the inner screw (optional). See Figure 8 (3)  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Rack Mounting Instructions  
Rack and Hard Drive Installation Instructions  
Figure 8: Attaching the rails to the chassis.  
1
3
Screw  
1
3
Screw  
Slide the inner rail  
6 Press the locking tab and push the middle rail back into the outer rail.  
Figure 9: Press the locking tab and push the middle rail back into the outer rail.  
7 Hang the hooks of the rails on the rack holes and if necessary, secure with screws.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Rack and Hard Drive Installation Instructions  
Rack Mounting Instructions  
Figure 10: Inserting the hooks on the rails.  
Optional  
screws  
8 Repeat Step 7 to mount the four ends, extending the rails as necessary.  
Figure 11: Installing the rails to the server rack.  
9 Pull the middle rail out of the front of the outer rail and make sure that the ball bearing  
shuttle is locked at the front of the middle rail.  
10 Align the inner rails with the middle rails and then push evenly on both sides of the  
chassis until it clicks into the fully extended position.  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rack Mounting Instructions  
Rack and Hard Drive Installation Instructions  
Figure 12: Installing the chassis on the rack.  
Ball bearing  
shuttle  
11 Depress the locking tabs on both sides of the chassis simultaneously and push the  
chassis all the way into the rear of the rack.  
12 If additional security is required, secure the chassis handles to the front of the rack with  
two screws (optional).  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rack and Hard Drive Installation Instructions  
Rack Mounting Instructions  
Figure 13: Optional screws to secure chassis to rack.  
Screw  
Screw  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rack Mounting Instructions  
Rack and Hard Drive Installation Instructions  
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide  
05-420-126194-20100608  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Brush Cutter SRM 2110 User Manual
Echo Trimmer SRM 2300 User Manual
Fisher Price Baby Toy T7159 User Manual
Frigidaire Air Conditioner FRA226ST2 User Manual
GE Air Conditioner 10 ACA User Manual
GE Microwave Oven PSB2200NBB User Manual
GE Refrigerator 22 23 25 27 User Manual
GE Washer GFWS3500L User Manual
GE Welding System ACUXL16 User Manual
GN Netcom Cordless Telephone ELT 560 User Manual