Fluke Thermometer PN 3612805 User Manual

Users Manual  
373  
Clamp Meter  
PN 3612805  
July 2010  
© 2010 Fluke Corporation. All rights reserved. Printed in Taiwan. Specifications are subject to change without notice.  
All product nDamoewsnaloreatdradfreommarkWs owfwth.eSiroremspaencutiavelsc.ocmopma.niAesll. Manuals Search And Download.  
Table of Contents  
Title  
Page  
Introduction.................................................................................................................  
1
1
2
7
How to Contact Fluke.................................................................................................  
Safety Information ......................................................................................................  
The Meter ...................................................................................................................  
Electrical Specifications.......................................................................................... 15  
Mechanical Specifications...................................................................................... 16  
Environmental Specifications ................................................................................. 16  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
XWWarning  
Read "Safety Information" before you use the Meter.  
The Fluke 373 Clamp Meter (the Meter) measures true-rms ac and dc voltage, ac current,  
resistance, and capacitance.  
How to Contact Fluke  
To contact Fluke, call one of the following telephone numbers:  
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)  
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)  
Canada: 1-800-36-FLUKE (1-800-363-5853)  
Europe: +31 402-675-200  
Japan: +81-3-3434-0181  
Singapore: +65-738-5655  
Anywhere in the world: +1-425-446-5500  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
Or, visit Fluke's website at www.fluke.com.  
To register your product, visit http://register.fluke.com.  
To see, print, or download the latest manual supplement, visit  
Safety Information  
A Warning identifies conditions and actions that pose hazard(s) to the user; A Caution identifies  
conditions and procedures that could cause Meter damage, equipment under test damage, or  
permanent loss of data.  
Symbols used on the Meter and in this manual are explained in Table 1.  
XWWarning  
To prevent possible electrical shock or personal injury, follow these guidelines:  
Use the Meter only as specified in this manual or the protection provided by the  
Meter can be compromised.  
Examine the case before you use the Meter. Look for cracks or missing plastic.  
Carefully look at the insulation around the connectors.  
Never measure ac current while the test leads are inserted into the input jacks.  
Make sure the battery door is closed and latched before operating the Meter.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
Safety Information  
Remove the test leads from the Meter before the battery door is opened.  
Examine the test leads for damaged insulation or exposed metal. Check test lead  
continuity. Replace damaged test leads before using the Meter.  
Do not use the Meter if it operates incorrectly. Protection can be compromised.  
When in doubt, have the Meter serviced.  
Do not use the Meter around explosive gas, vapor or in damp or wet  
environments.  
When measuring, keep fingers behind the Tactile Barrier. See "The Meter" .  
Use only type AA batteries, properly installed in the Meter case, to power the  
Meter.  
To avoid false readings that can lead to electrical shock and injury, replace the  
batteries as soon as the low battery indicator () appears.  
When servicing the Meter, use only specified replacement parts.  
Have the Meter serviced only by qualified service personnel.  
Be careful around voltages > 30 V ac rms, 42 V ac peak, or 60 V dc. Such  
voltages pose a shock hazard.  
Do not apply more than the rated voltage, as marked on the Meter, between the  
terminals or between any terminal and earth ground.  
When using the probes, keep fingers behind the finger guards on the probes.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
Connect the common test lead before connecting the live test lead. When  
disconnecting test leads, disconnect the live test lead first.  
Do not work alone so assistance can be rendered in an emergency.  
Use extreme caution when working around bare conductors or bus bars. Contact  
with the conductor could result in electric shock.  
Adhere to local and national safety codes. Individual protective equipment must  
be used to prevent shock and arc blast injury where hazardous live conductors  
are exposed.  
Disconnect circuit power and discharge all high-voltage capacitors before you  
measure resistance, continuity, or capacitance.  
Do not measure current in circuits carrying more than 600 V or 600 A with the  
Meter Jaw.  
Never operate the Meter with the back cover removed or the case open.  
WCaution  
To avoid possible damage to the Meter or to equipment under test:  
Use the proper jacks, function, and range for the measurement application.  
Clean the case and accessories with a damp cloth and mild detergents only.  
Do not use abrasives or solvents. Make sure all water is removed before  
use.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
Safety Information  
Table 1. Symbols  
Symbol  
Symbol  
Meaning  
Meaning  
B
AC (Alternating Current)  
Earth ground  
J
~
Do not dispose of this product as  
unsorted municipal waste. Go to  
Fluke’s website for recycling  
information.  
F
DC (Direct Current)  
Conforms to European Union  
directives.  
X
Hazardous voltage  
P
)
T
Risk of Danger. Important  
information. See Manual.  
Conforms to relevant North American  
Safety Standards.  
W
M
®
Battery  
Double insulated  
Examined and licensed by TÜV  
Product Services.  
Conforms to relevant Australian  
standards.  
;
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
Symbol  
Meaning  
Symbol  
Meaning  
IEC Measurement Category III  
IEC Measurement Category IV  
CAT III equipment has protection  
against transients in equipment in  
fixed-equipment installations, such  
as distribution panels, feeders and  
short branch circuits, and lighting  
systems in large buildings.  
CAT IV equipment has protection  
against transients from the primary  
supply level, such as an electricity  
Meter or an overhead or  
CAT III  
CAT IV  
underground utility service.  
Application around and removal  
from HAZARDOUS LIVE  
conductors is permitted.  
,
Note  
The Measurement Category (CAT) and voltage rating of any combination of test probe,  
test probe accessory, current clamp accessory, and the Meter is the LOWEST rating of  
any individual component.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
The Meter  
The Meter  
1
ghl008.eps  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
Auto Off  
20  
ghl001.eps  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
The Meter  
Backlight  
ghl002.eps  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
A
ghl003.eps  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
The Meter  
V
V
or  
> 30 V  
V
V
ghl004.eps  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
< 30  
ghl005.eps  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
The Meter  
HOLD  
2
1
3
ghl006.eps  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
3
1
2
ghl007.eps  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
The Meter  
Electrical Specifications  
AC Current  
Range .....................................................600.0 A  
Resolution...............................................0.1 A  
Accuracy .................................................2 % 5 digits (48 – 62 Hz)  
Crest Factor (50/60 Hz) ..........................2.5 @ 600 A  
AC Voltage  
Range ....................................................600.0 V  
Resolution...............................................0.1 V  
Accuracy .................................................1.0 % 5 digits (48 – 62 Hz)  
DC Voltage  
Range ....................................................600.0 V  
Resolution...............................................0.1 V  
Accuracy .................................................1 % 5 digits  
Resistance  
Range .....................................................600.0 Ω/6000 Ω  
Resolution...............................................0.1 Ω/1 Ω  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
Accuracy .................................................1 % 5 digits  
Continuity Beeper ...................................30 Ω  
Capacitance  
Range .....................................................10.0 – 100.0 μF / 1000 μF  
Resolution...............................................0.1 μF/1 μF  
Accuracy .................................................1.9 % 2 digits  
Mechanical Specifications  
Size (L x W x H) .....................................232 mm x 85 mm x 45 mm  
Weight.....................................................370 g  
Environmental Specifications  
Operating Temperature...........................-10 °C to +50 °C  
Storage Temp .........................................-40 °C to +60 °C  
Operating Humidity .................................Non condensing (< 10 °C)  
90 % RH (at 10 °C to 30 °C)  
75 % RH (at 30 °C to 40 °C)  
45 % RH (at 40 °C to 50 °C)  
(Without Condensation)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clamp Meter  
The Meter  
Operating Altitude ...................................3000 meters  
Storage Altitude ......................................12,000 meters  
EMI, EMC................................................Meets all applicable requirements in EN61326-1:2006  
Temperature Coefficients........................Add 0.1 x specified accuracy for each degree C above  
28 °C or below 18 °C  
Safety Compliance..................................ANSI/ISA S82.02.01:2004  
CAN/CSA-C22.2 No. 61010-1-04  
IEC/EN 61010-1:2001, 600V CAT III, 300V CAT IV  
Pollution Degree 2  
EN/IEC 61010-2-32:2002  
EN/IEC 61010-031:2002/A1:2008  
P
Agency Approvals................................... ), ;, ®  
Batteries..................................................2 AA, NEDA 15A, IEC LR6  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
373  
Users Manual  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  

EdgeStar Air Compressor AP550Z User Manual
EdgeStar Refrigerator Upright Refrigerator User Manual
Eureka Vacuum Cleaner 4380 User Manual
Euro Pro Frozen Dessert Maker KP160E User Manual
Extron electronic Network Card MC104 User Manual
Fujitsu Scanner P2WW 2301 01ENZ0 User Manual
GE Coffee Grinder 169028 User Manual
Gemini Speaker RS 308 User Manual
GE Washer 175D1807P239 User Manual
Gitzo Camcorder Accessories G1158T User Manual