Parts
Note: Some parts shown are assembled to both sides of the trike.
Handlebar Front
Handlebar Back
Upper Steering Ring
Frame
Lower
Steering Ring
Fork
Seat
Front Wheel
Assembly
2 Fork Covers
Seat Pin
4 Pedal Hubs
Rear Axle
2 Pedal Blocks
Part not shown: Label Sheet
2 Rear
Wheel Hubs
2 Rear
Wheels
2 Rear
Wheel Caps
.354"
#8 x 2¼" Screw - 1
#8 x ¾" Screw - 6
#6 x 1/2" Screw - 2
.354" Cap Nut - 2*
ALL FASTENERS SHOWN ACTUAL SIZE
*We’ve included one extra .354" cap nut for your convenience.
Note: Tighten and loosen the screws with a Phillips screwdriver. Do not over-tighten the screws.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Rear
Wheel
(Indented
Side Down)
Rear Wheel
(Flat Side First)
Rear Wheel Hub
(Flat Side Down)
Rear Axle
Rear Wheel Hub
(Pointed End First)
3
Rear Axle
• Turn the assembly upright.
• Slide a rear wheel, rounded side first, onto the end of the
rear axle.
• Slide a rear wheel hub, pointed end first, onto the end of
the rear axle.
1
• Slide a rear wheel hub, rounded side up, onto the
rear axle.
• Slide a rear wheel, indented side down, onto the rear axle.
Frame
Rear Axle Assembly
Bottom View
2
• Turn the frame upside down.
• Insert the rear axle assembly through the holes in the rear
of the frame.
.354"
4
• Fit a cap nut on the end of the rear axle.
• Tap the cap nut with a hammer. Gently pull the rear
wheel to be sure the cap nut is securely attached to
the rear axle.
Hint: You may need the help of another adult to hold the
other end of the rear axle in place.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Fork Arms
Front Wheel
Assembly
Groove
Rear Wheel Hub
Fork Cover
Pedal Axle
7
Rear Wheel Cap
5
• Place the front wheel assembly between the fork arms.
Make sure the pedal axle fits into the groove at the bottom
of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #8 x ¾" screws into the fork cover and tighten.
• Fit the tabs on a rear wheel cap into the slots in the rear
wheel hub. Push to "snap" the rear wheel cap in place.
• Repeat this procedure to attach the other rear wheel cap
to the other wheel hub.
• Repeat this procedure to attach the other fork cover to the
other fork arm.
Pedal Axle Tab
Pedal Hub
Pedal Hub
6
Lower Steering Ring
• Fit two pedal hubs onto the pedal axle tabs. Make sure
the tabs fit into the slot in each pedal hub.
• While holding the pedal hubs on the pedal axle, insert the
pedal axle into the hole in the center of the front wheel.
• Press the pedal hubs into the center of the front wheel
until they are flush with the surface of the front wheel.
• Repeat this procedure on the other side with the other
two pedal hubs.
8
• Fit the lower steering ring onto the frame, as shown.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Fork Post
Lower
Steering Ring
Handlebar Front
Handlebar Back
Fork Post
¾" Screw
¾" Screw
Fork Cover
9
11
• While holding the lower steering ring in place, insert the
fork post up through the hole in the neck of the frame.
Make sure the fork is positioned so that the fork covers
face the rear wheels.
• Fit the handlebar front to the fork post, as shown.
• Fit the handlebar back to the fork post and handlebar front.
Hold them together firmly.
• Insert the remaining #8 x ¾" screws through the outer
holes in the handlebar back and tighten.
Upper
Steering Ring
2¼" Screw
12
10
• Insert the #8 x 2¼" screw through the center hole in the
handlebar back and tighten.
• Fit the upper steering ring onto the frame, as shown.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Seat
1/2" Screw
Seat Pin
13
14
• Fit the seat onto the frame.
• Insert the seat pin into the holes in the frame.
• Fit the pedal blocks onto each pedal for smaller riders.
Insert a #6 x 1/2" screw into hole in each pedal block
and tighten.
Hint: The seat is adjustable to your child's size. Have your
child sit on the seat and check the foot pedal distance.
Adjust the seat up or down for your child's comfort.
• Remove the pedal blocks for bigger riders and store for
future use.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Information
IMPORTANT! It is a good practice to start training children
very young regarding the importance of helmet use. When
children are older and riding bicycles and faster vehicles,
it is important that they use a helmet each and every time
they ride. For this reason, even while riding a tricycle, it is
a good idea to familiarize your child with helmet use,
so that it becomes a habit for life. Choose a helmet that
complies with requirements of the applicable certifying
agency for bicycle helmets.
Care
• Periodically, check the plastic parts and if broken or cracked,
dispose of them properly.
• Periodically, check all fasteners regularly to be sure they
are tight. If the fasteners are not tight, tighten them
as necessary.
• To clean, use a mild soap and water solution and a clean
cloth. Rinse clean with water to remove soap residue.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|