Installation Instructions
™
3-in-1 High Chair to Booster
Model Number P5369 and P6028
WARNING
FALL HAZARD
• The seat can tip backwards and fall from the high
chair frame if you unlatch the booster release with
your child in it. DO NOT use this product until you
have installed the brackets on the high chair frame.
• The seat back can detach from the seat bottom if
it is not completely snapped in place. DO NOT use
this product until you have properly installed the seat
back to the seat bottom and re-installed the restraint
system properly on the seat.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bracket Installation Instructions
B
A
Booster Seat
High Chair Frame
Latch
1
2
• REMOVE your child from the seat.
• Lift the seat off of the high chair frame.
• Set the seat aside for seat back installation.
A
• While sliding the switch
, pull the latch toward
B
you
.
Footrest
Seat Support
Seat Support
B
A
Remove
These Screws
Seat Support
Tube
3
4
Left Bracket
BOTTOM VIEW
• Turn the high chair frame over. Position it so that
the footrest is facing away from you.
• First, fit the slot on the left bracket (labeled 1) onto
A
the seat support tube closest to you
.
• Then, slide the left bracket completely onto the
• Remove the screws, furthest from the footrest, in
the seat support.
B
seat support
.
Hint: The brackets are designed to ꢀt each side of
the seat support one way.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Bracket Installation Instructions
Seat Support
Tube
Seat Support
Seat Support
B
A
#8 x 3/4" (1,9 cm)
Screw
Left Bracket
5
6
Right Bracket
• Push to align the hole in the left bracket with the
hole in the seat support.
• Insert a #8 x /4" (1,9 cm) screw (provided in
this kit) through the left bracket and into the seat
support. Tighten the screw with a Phillips screw-
driver. Do not over-tighten.
• First, fit the slot on the right bracket (labeled 2)
A
onto the seat support tube closest to you
.
3
• Then, slide the right bracket completely onto the
B
seat support
.
Hint: The brackets are designed to fit each side of
the seat support one way.
Seat Support
#8 x 3/4" (1,9 cm)
Screw
Right Bracket
8
7
• Push to align the hole in the right bracket with the
hole in the seat support.
• Insert a #8 x /4" (1,9 cm) screw (provided in
this kit) through the right bracket and into the seat
support. Tighten the screw with a Phillips screw-
driver. Do not over-tighten.
• For your convenience this kit includes extra screws
(just in case you misplace the screws removed in
step 3). If after assembling the brackets you have
extra screws, dispose of them in the garbage.
3
4
Bracket installation is now complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
Seat Back Installation Instructions
LIFT
"T" Ends of
Shoulder Straps
BACK VIEW
Shoulder Straps
PULL TAB
1
2
• From behind the seat, push the "T" ends of the
shoulder straps through the slots in the seat back.
• Pull the tab on the seat back. Lift to remove the
seat back from the seat.
BACK VIEW
Seat Back Pad
Pad Straps
Seat Back
3
4
• From behind the seat back, unfasten the pad straps. • Dispose of the seat back in the garbage.
• Remove the seat back pad from the seat back.
• Set the seat back pad aside.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Seat Back Installation Instructions
BACK VIEW
BACK VIEW
Upper Shoulder
Belt Slots
(Larger Baby)
Lower
Shoulder
Belt Slots
(Smaller Baby)
Seat Back Pad
New
Seat Back
Pad Straps
Small Slots
Shoulder Belt
"T" Ends
5
6
Small Slots
• Fit the straps on the back of the seat back pad
Smaller Baby
into the small slots in the new seat back.
• Insert the "T" ends of the shoulder belts through
the lower slots in the pad and seat back. Pull on
the shoulder belts to be sure they are secure.
• Press to fasten the pad straps and secure the seat
back pad to the new seat back.
Larger Baby
• Insert the "T" ends of the shoulder belts through
the upper slots in the pad and seat back. Pull on
the shoulder belts to be sure they are secure.
New Seat Back
B
Tab
Tab
Slot
A
A
Slot
8
7
• At an angle, fit the tabs on the new seat back into
• Turn the high chair frame upright and replace the
seat on the high chair frame.
• Push the seat to lock in place. You should hear
a "click".
A
the slots in the seat
.
B
• Push the seat back to "snap" in place
.
IMPORTANT! Pull on the seat back to be sure it
is secure to the seat bottom. Seat back installa-
tion is now complete
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Information
United States
If you have further questions regarding the installation of the brackets or seat back,
please call Fisher-Price® Consumer Relations at 1-888-683-6224, 9 AM – 7 PM (EST)
Monday through Friday and 11 AM – 5 PM (EST) Saturday. Hearing-impaired
consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to
Fisher-Price® Consumer Relations, 636 Girard Avenue, East Aurora, New York 14052.
Great Britain
Vanwall Business Park, Maidenhead SL6 4UB.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN U.S.A.
P5369pr-0922
Download from Www.Somanuals.com. All Manuals Search And Download.
|