Firstech LLC Remote Starter CS 600 User Manual

User Manual

By Firstech LLC, Version: 1.0

Applicable to the following remote(s);

CS-600 Remote (1-Way 4 Button Remote)

This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;

(1) This device may not cause harmful interference.

(2) This device may accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate this device.

WWW.COMPUSTAR.COM

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Thank you for purchasing a Firstech remote start system for your vehicle. In order to truly enjoy the

benefits of this system, we recommend that you thoroughly review the following manual. Please note that

this manual applies to the Firstech CS-600-S 4 Button Remote Starter system only. The CS-600-S offers

keyless entry and remote start only. There may also be features listed in this manual that require

additional installation or programming before they can become active. If you have any questions, please

contact your original place of purchase. For further information you may also contact our customer

support center by calling 888-820-3690.

Kit(s) Contents

2 x CS-600 Remote

Starter Only Control Module

1 x ANT-AM Antenna

1 x Hood Pin

Warranty Coverage

Caution: The Manufacture’s warranty will be voided if this product is installed by anyone other than an

authorized Firstech dealer. For complete warranty details visit www.compustar.com or the last page of

this manual.

Warranty registration can be completed online by visiting www.compustar.com. Please complete the

registration form within 10 days of purchase. We no longer include a mail-in warranty registration card

with each unit – registration must be done online. To verify that an authorized dealer installed your

system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer

invoice in a safe place.

Remote Reference

CS-600 (1-Way 4 Button Remote)

Applicable to the following models;

- CS-600-S (remote start only)

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference

Valet Mode

When servicing or loaning your vehicle to others, your remote start system should be placed in Valet

mode. Valet mode prevents the system from remote starting and disables all alarm functions.

IMPORTANT: While in Valet mode the remote start will still lock and unlock power lock systems.

The system can be put into valet one of two ways;

1. Turn the vehicles key to the ignition “on” position and hold the Lock and Trunk buttons

simultaneously for 2.5 seconds. The parking lights will flash once to confirm the system is in valet

mode. Repeat this process to take the system out of valet mode. Upon tapping the same buttons

again the parking lights will flash twice to confirm the system is out of valet mode.

2. You can put the system into valet by turning the ignition key “on” and then “off” five

times within 7 seconds. The parking lights will flash once to confirm the system is in

valet mode. Shortly after the first flash, the parking lights will flash twice.

Remote Maintenance – Battery Replacement

The only regular maintenance this system requires is remote control battery replacement.

No programming is required when replacing the battery.

One-Way Remote: CS-600

First, remove the small Phillips screw located on the back of the remote. Once the screw has been

removed, gently pull the remote apart being careful to not touch the circuit board. The CS-600 requires

one A23 battery. These specialty batteries can be purchased from your local Firstech dealer or an

electronics store.

Download from Www.Somanuals.com. All Manuals Search And Download.

1 Button Remote Functions

Additional

Button

Duration

Programming

Required

Function / Description

0.5 seconds

3.5 seconds

0.5 seconds

2.5 seconds

0.5 seconds

2.5 seconds

Lock/Arm

Panic/vehicle locater (flashes vehicles parking lights and sounds siren and horn).

Unlock/Disarm

Aux 1. Triggers the auxiliary 1 output (most commonly used for sliding doors or rear lift

gate).

Trunk pop. Triggers the trunk release output and opens the vehicles trunk.

Aux 2. Triggers the auxiliary 2 output (most commonly used for sliding doors or rear lift

gate).

Activates the remote start. Repeat and remote start will shut off.

Option programming menu 1 - Installers Only.

Valet mode (see page 5 for details)

Option programming menu 2 - Installers Only.

Activates timer start mode. Timer start mode has multiple programmable settings:

Vehicle can start every 1.5 or 3 hours.

Option 2-1

Secure Auxiliary

Download from Www.Somanuals.com. All Manuals Search And Download.

General System Functions

The remote transmitter functions have been predetermined and programmed from the factory. The four

button configuration allows for keyless entry, trunk release, and/or remote start functionality. These

commands may require additional parts and labor. Please check with your place of purchase for more

information.

Sending Commands

When in range, and a button has been pressed, the remote bright blue LED will illuminate and vehicle’s

parking lights will flash. For example, to send a remote start command from the CS-600, hold down the

Key/Start button for 2.5 seconds. The remote bright blue LED will come on solid and then flash.

Active Lock/Arm and Unlock/Disarm

Tap the

button for 0.5 second to lock/arm your vehicle. Tap the

button to

unlock/disarm your vehicle. The remote bright blue LED will flash indicating the signal has been

sent to the vehicle. This feature is optional and may require additional programming and/or installation.

Please check with your place of purchase for details.

Automatic Transmission Remote Start Function

Hold the

button for 2.5 seconds to remote start an automatic transmission vehicle. If you are in

range and if the vehicle is ready to remote start, the vehicle parking lights will flash once.

If you are in range, the parking lights on the vehicle will flash three times followed by a certain number

after that, there is a remote start error. Refer to the “remote start error diagnostic” on page 7 of this

manual for details.

Upon receiving confirmation that your vehicle is running, the parking lights will light solid. The remote

start run time can be set for 3, 15, 25, or 45 minutes. This should be set at the time of installation. If not

ask your place of purchase to adjust the option if you would like a run-time other than the default 15

minutes.

IMPORTANT: The vehicle’s key must be inserted into the ignition and turned to the “on” position prior to

driving your vehicle. If the foot brake is depressed prior to the key being in the “on” position, the vehicle

will shut off.

Trunk Release

Hold button

for 2.5 seconds to release the trunk or hatch. If you are in range, the

vehicle’s parking lights will flash once and/or siren chirp once indicating that the trunk release

command has been successfully transmitted. IMPORTANT: Trunk release is an optional vehicle feature

that may require additional parts and labor.

Auxiliary Outputs/Rear Lift Gate/Sliding Doors

Your system has the ability to use outputs that can be configured to control power sliding doors or a rear

lift gate. These outputs some sort of data module. Your authorized Firstech dealer can set these outputs

up accordingly. Using auxiliary outputs to control additional vehicle functions will require additional parts

and can be rather labor extensive.

Tap button

for 0.5 seconds to trigger auxiliary output 1. Tap button

for 0.5

Download from Www.Somanuals.com. All Manuals Search And Download.

seconds to trigger auxiliary output 2. The vehicle’s parking lights will flash once indicating that the

auxiliary outputs have been triggered.

The system is in secure auxiliary mode, which requires you to hold buttons

seconds prior to triggering auxiliary 1 or 2.

for 2.5

Anti Grind

The optional anti-grind feature prevents you from accidentally grinding your vehicle’s starter motor when

taking over with the key. This feature requires additional installation and programming. Also your dealer

can program a basic security feature that prevents your vehicle from starting when it is locked/armed.

Please see your dealer for more details.

Timer Start Mode

Timer start mode is used to cool or warm the vehicle without manually starting with the key or

from the remote. While engaged, timer start will activate even while the remote is out of range.

Hold buttons

simultaneously for 2.5 seconds to activate timer start mode. Timer start

mode will be cancelled any time the vehicle is started manually or remotely. To change from the default

setting to optional settings, see your local Firstech dealer.

Default 1: Will start every 3 hours for a 24 hour cycle, or until the vehicle is remote started or started by

key, and run for whatever your remote start run time is set for.

Option 2: Will start every 1.5 hours for a 24 hour cycle, or until the vehicle is remote started or started by

key, and run for whatever your remote start run time is set for.

Drive Lock/Ignition Controlled Door Locks

Drive Lock/Ignition Controlled Door Locks all your power door locks to when the vehicle is started and

foot is placed on the brake. When you turn your vehicle off the doors will unlock. This feature may require

addition parts and labor. Please visit your place of purchase for details.

IMPORTANT: Drive lock mode requires that the dealer turn on Option 2-3. Drive lock has two settings;

Default 1: Off

Option 2: Locks the doors when the ignition is on and after the brake is depressed.

Remote Coding / Programming Routine(s)

IMPORTANT: The CS-600 remotes are preprogrammed to your system. In the even you need to

program your remotes follow this simple procedure below.

Programming CS-600

STEP 1: Activate Valet/Programming mode by manually turning the ignition key on and off (between the

Acc & On positions) five times within 7 seconds. The vehicle’s parking lights will flash once with the

successful completion of this step.

STEP 2: Within a second after cycling the ignition for the 5^thtime, tap the Lock button once for 0.5

second. The parking lights will flash once to confirm the transmitter has been coded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programming Multiple Remotes: After the confirmation flash given in

STEP 2, code additional remotes by pressing the single button on

remote. The parking lights will flash once confirming each additional

remote. The CS-600-S can store up to three remotes.

Exiting Programming: Programming is a timed sequence. If you can

not get the remote(s) to program then the system enters Valet Mode.

The parking lights will flash twice signaling the end of programming

mode.

Remote Start Error Diagnostic

If the remote start fails to start the vehicle, the parking lights will flash three times immediately. Following

those three flashes the parking lights will flash again corresponding to the error table.

Number of

Parking Light

Flashes

Remote Start Error

Motor running

Key in ignition on position

Door open (manual transmission only)

Trunk open

Foot brake on

Hood open

Reservation off (manual transmission only)

Tach or voltage sensing failure

We recommend that you do not attempt any repairs on your remote starter. Contact your dealer or call us

directly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Lifetime Warranty

Firstech, LLC Warrants to the original purchaser that this product shall be free of defects in material and

workmanship under normal use and circumstances for the period of time that the original owner of this

product owns the vehicle in which it is installed; except that the remote controller unit for the period of

one year from the date of installation to the original owner of this product. When the original purchaser

returns the product to the retail store where it was purchased or prepaid postal to Firstech, LLC., 21911

68th Avenue South, Kent, WA 98032, USA within the warranty period, and if the product is defective,

Firstech, LLC, will at its option repair or replace such.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUDED BY

THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COMMERCE

THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO, THE EXCLUSION OF ANY

AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WARRANTY OF FITNESS

FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF NON-INFRINGEMENT OR

PATENTS, IN THE UNITED STATES OF AMERICA AND/OR ABROAD. NEITHER THE

MANUFACTURER OF ANY ENTITIES CONNECTED THEREWITH SHALL BE RESPONSIBLE OR

LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY

CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF

EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE.

NOTWITHSTANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO

REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or

limitation on how long an implied warranty will last or the exclusion or limitation of incidental or

consequential damages. This warranty gives you specific legal rights, and you may also have other

rights, which vary State to State.

Firstech, LLC. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING

BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES

FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC

OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of Compustar. NOT

WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO

REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE.

Your Warranty

The product's warranty is automatically void if the date code or serial number is defaced, missing or

altered. This warranty will not be valid unless you have completed the registration card at

www.compustar.com within 10 days of purchase.

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes:

___________________________________________________________________________________

Download from Www.Somanuals.com. All Manuals Search And Download.

___________________________________________________________________________________

Download from Www.Somanuals.com. All Manuals Search And Download.

www.compustar.com

Toll Free: 888-820-3690

21911 68^thAve S

Kent, WA 98032

Download from Www.Somanuals.com. All Manuals Search And Download.

Excalibur electronic Games 402 1 User Manual
Extron electronic Network Card MTP Series User Manual
Fellowes Paper Shredder 450Ms User Manual
Fisher Price Swing Sets H7181 User Manual
Fujitsu Laptop SCA1 User Manual
Furuno Marine Radio FS 1575 2575 5075 User Manual
GE Monogram Refrigerator Side by Side Stainless Steel Free Standing Refrigerators User Manual
GE Water Dispenser GXSF27E User Manual
Gigabyte Network Card 6EA User Manual
Global Machinery Company Saw LSM210A User Manual