FieldServer Computer Drive FS 8700 19 User Manual

A Sierra Monitor Company  
Driver Manual  
(Supplement to the FieldServer Instruction Manual)  
FS-8700-19 Metasys N2  
APPLICABILITY & EFFECTIVITY  
Effective for all systems manufactured after May 1, 2001  
Driver Version:  
1.02  
Document Revision: 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 3 of 51  
1.  
Metasys N2 Description  
The Metasys N2 network supports communications with a diverse range of devices. Many N2  
compatible devices use their own version of the protocol and care must be taken to ensure that  
the device of interest is covered by the FieldServer implementation.  
At present the FieldServer N2 driver will support communications with the following devices or  
device classes when acting as a Client:  
1. N2Open-compliant devices. N2Open is a published N2-compatible protocol enabling 3rd  
party device vendors to integrate with N2.  
2. VMA 1400 series (with restrictions, as described in this document)  
3. DX9100 and XT9100  
When acting as a Server, the FieldServer N2 driver can emulate an N2Open device only.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 4 of 51  
2.  
Driver Scope of Supply  
2.1. Supplied by FieldServer Technologies for this driver  
FieldServer Technologies  
PART #  
Description  
FS-8915-10  
FS-8915-10  
FS-8917-02  
FS-8917-01  
UTP cable (7 foot) for Ethernet connection  
UTP cable (7 foot) for RS-232 use  
RJ45 to DB9F connector adapter  
RJ45 to DB25M connection adapter  
RS-485 connection adapter  
SPA59132  
FS-8700-19  
Driver Manual.  
2.2.  
2.2.1.  
Provided by the Supplier of 3rd Party Equipment  
Hardware  
PART #  
DESCRIPTION  
Metasys NCU or other device  
2.2.2.  
Required 3rd Party Software  
Depending on application, JCI software may be necessary  
2.2.3.  
Required 3rd Party Configuration  
Depending on application, third party devices may need configuration  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 5 of 51  
3.  
Hardware Connections  
FieldServer as a Client  
N2 bus  
3rd Party  
System  
FieldServer  
N2 devices  
FieldServer as a Server  
N2 bus  
NCM, N30 or  
other N2 client  
(408)-262-2299  
MetasysN2  
CONNECTION DIAGRAM  
3rd Party  
System  
FieldServer  
N2 devices  
BASE NAME:  
FILE NAME: FS-8700-19  
DATE: 05/31/06  
BY: MC  
3.1.  
Hardware Connection Tips / Hints  
When using the FS-X40 ensure that the FieldServer is connected to the network using one  
or both of the RS-485 ports marked R1 and R2. If more ports are required, P1-P8 may be  
used in conjunction with an RS-232-to-RS-485 converter.  
When using the FS-X20, ensure that the serial port is configured as an RS-485 port. Refer  
to Appendix B.3 for more information.  
Only one N2 Client may be connected to a N2 network. If the FieldServer is to act as a  
Client, ensure that no other Clients are connected to the same N2 network.  
Note: Interceptor mode is no longer supported for this driver.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 6 of 51  
4.  
Configuring the FieldServer as a Metasys N2 Client  
For a detailed discussion on FieldServer configuration, please refer to the FieldServer  
Configuration manual. The information that follows describes how to expand upon the factory  
defaults provided in the configuration files included with the FieldServer (See “.csv” sample files  
provided with the FieldServer).  
This section documents and describes the parameters necessary for configuring the FieldServer  
to communicate with a Metasys N2 Server.  
4.1.  
Data Arrays/Descriptors  
The configuration file defines the FieldServer interfaces, and the data routing required. In  
order to enable the FieldServer for Metasys N2 communications, the driver independent  
FieldServer buffers need to be declared in the “Data Arrays” section, the destination device  
addresses need to be declared in the “Client Side Nodes” section, and the data required  
from the Servers needs to be mapped in the “Client Side Map Descriptors” section.  
Note that in the tables, * indicates an optional parameter, with the bold legal value being the  
default value. Where only one legal value is given, no other values for that parameter are  
allowed.  
Section Title  
Data_Arrays  
Column Title  
Function  
Legal Values  
Up to 15 alphanumeric  
characters  
Data_Array_Name  
Provide name for Data Array  
Float, Bit, UInt16, SInt16,  
Provide data format. Each Data Array Packed_Bit, Byte,  
Data_Array_Format  
Data_Array_Length  
can only take on one format.  
Packed_Byte,  
Swapped_Byte  
Number of Data Objects. Must be  
larger than the data storage area  
required by the Map Descriptors for  
the data being placed in this array.  
1-10,000  
Example  
// Data Arrays  
Data_Arrays  
Data_Array_Name,  
DA_AI_01,  
DA_AO_01,  
DA_DI_01,  
Data_Format,  
UInt16,  
UInt16,  
Bit,  
Data_Array_Length  
200  
200  
200  
200  
DA_DO_01,  
Bit,  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 7 of 51  
4.2.  
Client Side Connection Descriptions  
Section Title  
Connections  
Column Title  
Function  
Specify which port the device is  
connected to the FieldServer  
Specify protocol used  
Specify baud rate  
Legal Values  
P1-P8, R1-R21  
Port  
Protocol  
Baud*  
Parity*  
Metasys_N2  
9600  
None  
8
Specify parity  
Specify data bits  
Data_Bits*  
Stop_Bits*  
Specify stop bits  
1
Handshaking*  
Poll _Delay*  
Specify hardware handshaking  
Time between internal polls  
Duration of RTS assert before  
start of transmission  
None  
0
Line_Drive_On*  
0.001s  
Duration of RTS assert after  
end of transmission  
Line_Drive_Off*  
0.000s  
Example  
//    Client Side Connections  
Connections  
Port,  
R1,  
Protocol  
Metasys_N2  
1 Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction  
manual for details of the ports available on specific hardware.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 8 of 51  
4.3.  
Client Side Node Descriptors  
Section  
Title  
Nodes  
Column  
Title  
Function  
Legal Values  
Up to 32  
Node_Name Provide name for node  
alphanumeric  
characters  
1-255  
Node_ID  
Protocol  
Station address of physical Server node  
Specify protocol used  
Metasys_N2  
Specify which port the device is connected to the  
FieldServer  
Connection  
P1-P8, R1-R21  
Identify type of device  
If this parameter is omitted the driver treats the  
configuration as a N2Open configuration and marks  
the Node_Type as N2OpenClient when using Ruinet N2OpenClient,  
Node_Type  
to check the Node parameters.  
DX9100, VMA,  
N2Open  
If the Node_Type is specified as N2Open then the  
driver still acts as N2 Open configuration but some  
legacy port expander functionality used in some  
legacy advanced configuration is enabled.  
Example  
// Client Side Nodes  
Nodes  
Node_Name,  
PLC 1,  
Node_ID,  
1,  
Protocol,  
Metasys_N2,  
Connection,  
P8,  
Node_Type  
VMA  
4.4.  
4.4.1.  
Client Side Map Descriptors  
FieldServer Related Map Descriptor Parameters  
Column Title  
Function  
Name of this Map  
Descriptor  
Legal Values  
Up to 32 alphanumeric  
characters  
Map_Descriptor_Name  
Name of Data Array  
where data is to be  
One of the Data Array names  
from “Data Array” section  
Data_Array_Name  
stored in the FieldServer above  
Starting location in Data 0 to maximum specified in  
Data_Array_Offset  
Function  
Array  
“Data Array” section above  
Function of Client Map  
Descriptor  
RDBC, WRBC, WRBX  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 9 of 51  
4.4.2.  
Driver Related Map Descriptor Parameters  
4.4.2.1.  
Column Title  
N2Open Map Descriptor Parameters  
Function  
Legal Values  
One of the node names  
specified in “Client Node  
Descriptor” above  
If the vendor device lists a  
point as BD then use  
Data_Type=Byte.  
Node_Name  
Data_Type  
Name of Node to fetch data from  
If the vendor device lists a  
point as ADI then use  
Data_Type=Integer.  
Data type  
If the vendor device lists a  
point as ADF then use  
Data_Type=Float_Reg.  
AI, AO, DI, DO,  
Float_Reg, Integer, Byte  
Length  
Address  
Length of Map Descriptor  
Starting address of read block  
Used to specify an N2-specific  
function, e.g. COS. See  
1
1-256  
MN2_Function*  
MN2_Attribute*  
COS, Override, Release  
description below.  
Used to specify the attribute if an  
attribute other than Current Value  
is to be accessed. See attribute  
table below  
See  
N2Open Attribute Table  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Data Type  
Page 10 of 51  
N2Open Attribute Table  
Attribute No.  
Attribute  
Object Configuration  
1
2
3
4
5
6
7
8
1
2
1
2
3
1
2
3
4
5
1
2
1
2
1
2
Object Status  
Analog Input Value  
Low Alarm Limit  
High Alarm Limit  
Low Warn Limit  
High Warn Limit  
Differential  
Object Configuration  
Object Status  
Object Configuration  
Object Status  
Analog Input  
Binary Input  
Analog Output  
Current Value  
Object Configuration  
Object Status  
Minimum On-Time  
Minimum Off-Time  
Maximum Cycles/Hour  
Object Status  
Binary Output  
Internal Float  
Internal Integer  
Internal Byte  
Current Value  
Object Status  
Current Value  
Object Status  
Current Value  
Using Change of State (COS) – N2Open  
If a large number of points are to be monitored, optimal efficiency is achieved by  
using the COS mechanism instead of reading each individual point directly.  
A
N2Open device responds to a COS poll with a change record if a change has taken  
place. On startup the device will report the state of all its points when it receives a  
COS poll.  
Two kinds of Map Descriptors are required for every node that is to be monitored  
using COS:  
A COS polling Map Descriptor with Function set to COS_Poll.  
A COS_Read (i.e. Function set to COS_Read) Map Descriptor for every point  
on that node that is to be monitored. Any COS records received will be stored to  
the matching Map Descriptor data location.  
Note that the COS_Read Map Descriptor has an optional scan_interval. If a value is  
set the Map Descriptor will poll at that rate in addition to receiving COS data. This  
can be used if the values are to be refreshed continually even if they don’t change. If  
the scan_interval is not configured (through omitting the column, or by setting the  
value to ‘-‘) the COS_Read Map Descriptor will not cause active polls once the value  
has been initialized. See 4.4.4 for example.  
Important Note on COS Operation in N2Open  
Please be aware that N2Open devices will only report value changes under the  
following conditions:  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 11 of 51  
Point Type  
AI  
Conditions that will trigger a COS report  
point status change (e.g. override)  
change in alarm or warning status  
NB: no value changes within the normal band are reported by COS!  
point status change (e.g. override)  
NB: no value changes within the normal band are reported by COS!  
AO  
BI, BO  
point status change (e.g. override); includes current value (On/Off)  
ADI, ADF, BD none; COS cannot be used with internal data types.  
Using Override and Release – N2Open  
It is not normally necessary to use the Override command explicitly as the  
FieldServer automatically uses this command when the Current Value attribute of a  
point is written. For any other attribute it uses the Write command. It will sometimes  
be necessary to send a Release command to an overridden point, however. To do  
this, a Map Descriptor must be configured with Function set to wrbx and  
MN2_Function set to Release. Then, when any value is stored to the Map  
Descriptor data location, the Release command will be sent to the N2Open point  
specified by the Map Descriptor.  
4.4.2.2.  
VMA Map Descriptor Parameters  
Column Title  
Function  
Legal Values  
One of the node names  
specified in “Client Node  
Descriptor” above  
AI, AO, DI, DO, Driver  
(used for ADF, ADI and  
BD)  
Name of Node to fetch  
data from  
Node_Name  
Data_Type  
Data type  
Length  
Length of Map Descriptor  
Starting address of read  
block  
1
Address  
1-256  
Data type specifier to be  
set when Data_Type has  
been set to Driver  
MN2_Type  
5-7  
ADI, ADF and BD types: using the “Driver” Data_Type and MN2_Type fields  
The VMA protocol uses a byte value to specify the data types. The standard types  
AI, AO, DI and DO correspond to a byte value of 1 through 4 respectively. The types  
ADF, ADI and BD are believed to correspond to a byte value of 5 through 7  
respectively. If the user wishes to use any other type value based on knowledge of a  
particular VMA configuration, then that value may also be specified here. Refer to  
Section 4.4.5 for a specific example.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 12 of 51  
Driver Data_Type  
MN2_Type values  
Point Type  
Known Value2  
Suggested Value3  
AI  
AO  
BI  
BO  
ADF  
ADI  
BD  
1
2
3
4
5
6
7
If a large number of points are to be monitored, optimal efficiency is achieved by  
using the COS mechanism instead of reading each individual point directly. An  
N2Open device responds to a COS poll with a change record if a change has taken  
place. On startup the device will report the state of all its points when it receives a  
COS poll.  
Three kinds of Map Descriptors are required for every node that is to be monitored  
using COS:  
A COS initialization Map Descriptor with Function set to ARS and  
MN2_Function set to COS_Enable. This Map Descriptor enables COS polling  
of those points on the VMA for which Passive Map Descriptors exist.  
A COS polling Map Descriptor with Function set to rdbc and MN2_Function set  
to COS.  
A Passive (i.e. Function set to Passive) Map Descriptor for every point on that  
node that is to be monitored. Any COS records received will be stored to the  
matching Map Descriptor data location.  
See example in Section 4.4.5  
Using Override and Release - VMA  
It is normally not necessary to use the Override command explicitly as the  
FieldServer automatically uses this command when the Current Value attribute of a  
point is written. For any other attribute it uses the Write command. It will sometimes  
be necessary to send a Release command to an overridden point, however. To do  
this, a Map Descriptor must be configured with Function set to wrbx and  
MN2_Function set to Release. Then, when any value is stored to the Map  
Descriptor data location, the Release command will be sent to the VMA point  
specified by the Map Descriptor.  
Note: The VMA Release function only works for analog and binary inputs (AI and  
BI). Outputs may be restored to their original value using an explicit write command.  
2
3
For information only. Do not use Driver type for these, but specify AI, AO, BI or BO directly in the Data_Type field.  
These values are believed to be correct for the corresponding point types, but no guarantee can be given at this time.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 13 of 51  
4.4.2.3.  
DX9100 Map Descriptor Parameters  
Column Title  
Function  
Legal Values  
One of the node names  
specified in “Client Node  
Descriptor” above  
1
Name of Node to fetch  
data from  
Node_Name  
Length  
Length of Map Descriptor  
Starting address of read  
block  
Address  
0 - 2397  
For DX9100 addresses please refer to the DX9100 user documentation. This lists  
the name, function (read/write) and data format of all available points. Alternatively,  
obtain assistance from FieldServer Technical Support.  
4.4.3.  
Column Title  
Scan_Interval  
Timing Parameters  
Function  
Rate at which data is polled  
Legal Values  
≥0.001s  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 16 of 51  
5.  
Configuring the FieldServer as a Metasys N2 Server  
For a detailed discussion on FieldServer configuration, please refer to the FieldServer  
Configuration Manual. The information that follows describes how to expand upon the factory  
defaults provided in the configuration files included with the FieldServer (See “.csv” files on the  
driver diskette).  
This section documents and describes the parameters necessary for configuring the FieldServer  
to communicate with a Metasys N2Open Client. Note that only the N2Open variation of the  
N2 protocol may be used when configuring the FieldServer as a Server.  
The configuration file tells the FieldServer about its interfaces, and the routing of data required.  
In order to enable the FieldServer for Metasys N2 communications, the driver independent  
FieldServer buffers need to be declared in the “Data Arrays” section, the FieldServer virtual  
node(s) needs to be declared in the “Server Side Nodes” section, and the data to be provided to  
the Clients needs to be mapped in the “Server Side Map Descriptors” section. Details on how to  
do this can be found below.  
Note that in the tables, * indicates an optional parameter, with the bold legal value being the  
default.  
5.1.  
Server Side Connection Descriptors  
Section Title  
Connections  
Column Title  
Port  
Function  
Specify which port the device is  
connected to the FieldServer  
Specify protocol used  
Specify baud rate  
Legal Values  
P1-P8, R1-R24  
Protocol  
Baud*  
Metasys_N2  
9600  
None  
8
Parity*  
Specify parity  
Data_Bits*  
Specify data bits  
Stop_Bits*  
Specify stop bits  
1
Handshaking*  
Poll _Delay*  
Specify hardware handshaking None  
Time between internal polls  
Duration of RTS assert before  
start of transmission  
0
Line_Drive_On*  
0.001s  
Duration of RTS assert after  
end of transmission  
Line_Drive_Off*  
0.000s  
Example  
//    Server Side Connections  
Connections  
Port,  
P8,  
Protocol  
Metasys_N2  
4 Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction  
manual for details of the ports available on specific hardware.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 17 of 51  
Legal Values  
5.2.  
Server Side Node Descriptors  
Section Title  
Nodes  
Column Title  
Function  
Up to 32  
Node_Name  
Provide name for node  
alphanumeric  
characters  
MetasysN2 station address of physical  
Server node  
Specify protocol used  
Node_ID  
Protocol  
1-255  
Metasys_N2  
Specifies time FieldServer will reserve  
Server_Hold_Timeout* Server side connection while waiting for the < 0.175s5  
Client side to update data in Data_Array  
Identify type of device  
This parameter need not be specified. The  
N2OpenServer,  
N2Open  
Node_Type*  
Server side of the driver can only operate  
as an N2 Server and the option for setting it  
to N2Open is purely for backward  
compatibility.  
Example  
// Server Side Nodes  
Nodes  
Node_Name,  
PLC 1,  
Node_ID,  
1,  
Protocol  
Metasys_N2  
5 Can be set to >0.175s if the Client has bee set to timeout after >200ms. Refer to Appendix E for more  
information.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 18 of 51  
5.3.  
5.3.1.  
Server Side Map Descriptors  
FieldServer Specific Map Descriptor Parameters  
Column Title  
Function  
Name of this Map  
Descriptor  
Legal Values  
Up to 32 alphanumeric  
characters  
Map_Descriptor_Name  
Name of Data Array where  
data is to be stored in the  
FieldServer  
One of the Data Array  
names from “Data Array”  
section above  
Data_Array_Name  
Starting location in Data  
Array  
Function of Server Map  
Descriptor  
0 to maximum specified in  
“Data Array” section above  
Data_Array_Offset  
Function  
Server  
5.3.2.  
Column  
Driver Specific Map Descriptor Parameters  
Function  
Legal Values  
Title  
Name of Node to  
fetch data from  
One of the node names specified in “Client  
Node Descriptor” above  
Node_Name  
If the vendor device lists a point as BD then  
use Data_Type=Byte.  
If the vendor device lists a point as ADI then  
use Data_Type=Integer.  
Data_Type  
Data type  
If the vendor device lists a point as ADF then  
use Data_Type=Float_Reg.  
AI, AO, DI, DO, Float_Reg, Integer, Byte  
Length of Map  
Descriptor  
Length  
1 - 256  
Starting address of  
read block  
Address  
1 - 256  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 21 of 51  
Appendix A.2. Managing Analog Inputs and Outputs for DX9100.  
Relative offset for viewing an AI is 7  
Relative offset for viewing and forcing an AO is 6  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 22 of 51  
Appendix B. Troubleshooting tips  
Appendix B.1. Connection Tips & Hints  
When using the FieldServer as an N2 Client, make very sure that it is the only Client /  
master on the N2 network. If there is another Client on the network there will be  
communication conflicts. These will be reflected on the FieldServer as protocol errors.  
Appendix B.2. Offline Behavior  
When the Client node on the FieldServer goes offline, the corresponding data objects on the  
FieldServer are also marked offline. If a client polls a virtual FieldServer node for this  
particular data, therefore, an offline response will be returned by the FieldServer. A request  
from an master device for a FieldServer to identify itself would be met by a valid response,  
however. This could lead to confusion and status toggling. This can be addressed using  
Responsible Map Descriptors and by configuring the virtual FieldServer using the  
Offline_Method option. Please refer to the Configuration Manual for further information.  
Appendix B.3. Tip on Overrides  
It is important that there be only one device (including the slave device itself) updating a  
point which is in overridden mode. The reason for this is that the value of the point could be  
changed by an update from a non-Metasys Server before the override is released by the  
Metasys Master. In this case, the FieldServer would respond to a poll from the Master with  
this changed data.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 23 of 51  
Appendix C. Setting up FS-B20 for RS-485  
Appendix C.1. Jumper Settings:  
Jumpers jp16, jp17, and jp18 need to be transferred from pins 1-2 to pins 2-3 in order to  
enable RS-485. These jumpers can be found just behind the RJ45 ports inside the box  
Jmpr 18 in 485 position.  
Jmpr 16 in 485 position.  
Jmpr 17 in 485 position.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 24 of 51  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 25 of 51  
Appendix C.2. Hardware connections  
The FS-8917-16 pigtail cable is typically used for this port arrangement. Connection is  
depicted in the following diagram.  
SERIAL  
FS-X20  
RJ45 Male Modular  
Jack  
ORANGE/WHITE  
(RJ45-08)  
BROWN  
(RJ45-01)  
FS-8917-16  
+
-
G
BLUE/WHITE  
(RJ45-04)  
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
RJ45 Male Modular Jack  
RJ45 Female Modular Jack  
Appendix C.3. Configuration Settings  
The Port address in the Configuration needs to be set to R1 instead of P1.  
Line_Drive_On and Line_Drive_Off need to be defined in the connections section of the  
configuration file. These need to be set to at least 0.001s. Refer to Sections 4.2 and 5.1  
for more information.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Appendix D. Memory Maps  
Page 26 of 51  
Appendix D.1. Metasys DX9100 Memory Map  
Programmable modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
9
64  
160  
256  
352  
448  
544  
640  
736  
832  
928  
1024  
1120  
0040H  
00A0H  
0100H  
0160H  
01C0H  
0220H  
0280H  
02E0H  
0340H  
03A0H  
0400H  
0460H  
10  
11  
12  
Analog input modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
1216  
1232  
1248  
1264  
1280  
1296  
1312  
1328  
04C0H  
04D0H  
04E0H  
04F0H  
0500H  
0510H  
0520H  
0530H  
Analog output modules  
Module  
Module  
Version  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
2
1344  
1360  
0540H  
0550H  
or later (new for version 6.0):  
9
2304  
2320  
2336  
2352  
2368  
2384  
0900H  
0910H  
0920H  
0930H  
0940H  
0950H  
10  
11  
12  
13  
14  
Digital output modules  
Module  
Module  
Module  
Module  
Module  
Module  
3
4
5
6
7
8
1376  
1392  
1408  
1424  
1440  
1456  
0560H  
0570H  
0580H  
0590H  
05A0H  
05B0H  
Extension modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
1472  
1552  
1632  
1712  
1792  
1872  
1952  
2032  
05C0H  
0610H  
0660H  
06B0H  
0700H  
0750H  
07A0H  
07F0H  
Time schedule modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
2112  
2128  
2144  
2160  
2176  
2192  
2208  
2224  
0840H  
0850H  
0860H  
0870H  
0880H  
0890H  
08A0H  
08B0H  
Optimal start / stop module  
Module  
Module  
1
2
2240  
2272  
08C0H  
08E0H  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 27 of 51  
General control module  
Relative Item  
0
1
2
3
4
5
6
Signal Condition  
Byte  
Word  
Byte  
Word  
Byte  
Byte  
Read/Write  
Read  
Write  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Write  
Write  
-
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Read  
Johnson Tag  
UNIT  
SUP  
MNT  
DIAG  
DICT  
TOS  
DIS  
AIS  
LRST1  
LRST2  
LCOS1  
LCOS2  
-
CNTR1  
CNTR2  
CNTR3  
CNTR4  
CNTR5  
CNTR6  
CNTR7  
CNTR8  
PASS  
PC1  
Description  
Device model. For DX-9100 always 5  
Supervisory central control  
Maintenance control  
Diagnistics  
Digital input counters  
Triac output status  
Digital input status  
Analog input status  
Logic results 37637  
Logic results 17-32  
Logic constants 37637  
Logic constants 17-32  
Spare  
DI1 pulse count  
DI2 pulse count  
DI3 pulse count  
DI4 pulse count  
DI5 pulse count  
DI6 pulse count  
DI7 pulse count  
DI8 pulse count  
Byte  
7
8
9
Word  
Word  
Word  
Word  
Word  
-
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
Word  
Byte  
Byte  
Byte  
Byte  
Byte  
Byte  
Byte  
Byte  
Byte  
Word  
Byte  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
Password code  
Prescaler DI1 counter  
Prescaler DI2 counter  
Prescaler DI3 counter  
Prescaler DI4 counter  
Prescaler DI5 counter  
Prescaler DI6 counter  
Prescaler DI7 counter  
Prescaler DI8 counter  
User interface address  
Alarm disable condition source  
DX-9100 type settings  
Standard algorithm type  
Analog constant 1  
Analog constant 2  
Analog constant 3  
Analog constant 4  
Analog constant 5  
Analog constant 6  
Analog constant 7  
Analog constant 8  
PLC control and status  
PLC program counter  
PC2  
PC3  
PC4  
PC5  
PC6  
PC7  
PC8  
UIA  
ALD@  
DXS1  
ALG  
ACO1  
ACO2  
ACO3  
ACO4  
ACO5  
ACO6  
ACO7  
ACO8  
PLCNT  
PLCPC  
FP  
Byte  
Word  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 28 of 51  
Programmable Module Type  
Relative Item  
0
1
2
3
4
5
6
7
Signal Condition  
Byte  
Word  
Byte  
Byte  
Byte  
Byte  
Byte  
Byte  
Byte  
Byte  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Read/Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Johnson Tag  
PMTYP  
PMOPT  
PMF1  
PMF2  
PMF3  
PMF4  
PMF5  
PMF6  
PMF7  
Description  
Programmable module type  
Programmable module options  
Function channel number 1 - F1  
Function channel number 2 - F2  
Function channel number 3 - F3  
Function channel number 4 - F4  
Function channel number 5 - F5  
Function channel number 6 - F6  
Function channel number 7 - F7  
Function channel number 8 - F8  
Input connection - I1@  
Input connection - I2@  
Input connection - I3@  
Input connection - I4@  
Input connection - I5@  
Input connection - I6@  
Input connection - I7@  
Input connection - I8@  
Input connection - I9@  
Input connection - I10@  
Input connection - I11@  
Input connection - I12@  
Input connection - I13@  
Input connection - I14@  
Input connection - I15@  
Input connection - I16@  
Module constant - K1  
8
9
PMF8  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
PMI1@  
PMI2@  
PMI3@  
PMI4@  
PMI5@  
PMI6@  
PMI7@  
PMI8@  
PMI9@  
PMI10@  
PMI11@  
PMI12@  
PMI13@  
PMI14@  
PMI15@  
PMI16@  
PMK01  
PMK02  
PMK03  
PMK04  
PMK05  
PMK06  
PMK07  
PMK08  
PMK09  
PMK10  
PMK11  
PMK12  
PMK13  
PMK14  
PMK15  
PMK16  
PMK17  
PMK18  
PMK19  
PMK20  
PMK21  
PMK22  
PMK23  
PMK24  
PMK25  
PMK26  
PMK27  
PMK28  
PMK29  
PMK30  
PMK31  
Module constant - K2  
Module constant - K3  
Module constant - K4  
Module constant - K5  
Module constant - K6  
Module constant - K7  
Module constant - K8  
Module constant - K9  
Module constant - K10  
Module constant - K11  
Module constant - K12  
Module constant - K13  
Module constant - K14  
Module constant - K15  
Module constant - K16  
Module constant - K17  
Module constant - K18  
Module constant - K19  
Module constant - K20  
Module constant - K21  
Module constant - K22  
Module constant - K23  
Module constant - K24  
Module constant - K25  
Module constant - K26  
Module constant - K27  
Module constant - K28  
Module constant - K29  
Module constant - K30  
Module constant - K31  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 29 of 51  
Programmable Module Type  
Relative Item  
Signal Condition  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Read/Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Read  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Johnson Tag  
PMK32  
PMK33  
PMK34  
PMOU1  
PMOU2  
PMOU3  
PMOU4  
PMOU5  
PMOU6  
PMOU7  
PMOU8  
PMAX1  
PMAX2  
PMHDC  
PMDO  
Description  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
Module constant - K32  
Module constant - K33  
Module constant - K34  
Output channel 1  
Output channel 2  
Output channel 3  
Output channel 4  
Output channel 5  
Output channel 6  
Output channel 7  
Output channel 8  
Auxiliary output 1  
Auxiliary output 2  
FP  
Byte  
Byte  
Word  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
Hold mode control/status  
Logic output control and status  
Programmable module status  
Accumulator channel 1  
Accumulator channel 2  
Accumulator channel 3  
Accumulator channel 4  
Accumulator channel 5  
Accumulator channel 6  
Accumulator channel 7  
Accumulator channel 8  
PMST  
PMAC1  
PMAC2  
PMAC3  
PMAC4  
PMAC5  
PMAC6  
PMAC7  
PMAC8  
Analog Input Modules  
Relative Item  
Signal Condition  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Read/Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Read  
Read  
Read  
Read  
Johnson Tag  
AIT  
HR  
LR  
HIA  
LOA  
FTC  
ADF  
AI  
AI%  
ADC  
AIST  
Description  
0
1
2
3
4
5
6
7
8
9
10  
Analog inout type  
High range input  
Low range input  
High alarm limit  
Low alarm limit  
Filter constant  
Differential on alarm limit (units)  
Analog input value  
Analog input %  
Analog input in counts  
Analog input status  
FP  
FP  
Byte  
Analog Output Modules  
Relative Item  
Signal Condition  
Read/Write Johnson Tag  
Description  
0
1
2
3
4
5
6
7
8
9
10  
11  
12  
Byte  
Word  
Word  
FP  
FP  
FP  
FP  
Byte  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
AOT  
Analog output type  
AO@  
AOF@  
HRO  
LRO  
OFL  
OUT  
AOC  
HLO  
LLO  
INC@  
DEC@  
ENL@  
Source of analog output module  
Output forcing logic connection  
Output high range  
Output low range  
Output % value in forcing mode  
Output module output value %  
Analog output control and status  
Output high limit  
FP  
Output low limit  
Word  
Word  
Word  
DDC increase logic connection  
DDC decrease logic connection  
Limit function enable logic connection  
Digital Output Modules  
Relative Item  
Signal Condition  
Read/Write Johnson Tag  
Description  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 30 of 51  
Digital Output Modules  
Read/Write Johnson Tag  
Relative Item  
Signal Condition  
Description  
0
1
2
3
4
5
6
7
Byte  
Word  
Word  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Byte  
Word  
Word  
Word  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
DOT  
DO@  
FB@  
DOF@  
HRO  
LRO  
FST  
DB  
HLO  
LLO  
Digital output options  
Source of digital output module  
Source of feedback signal  
Output forcing logic connection  
Output high range  
Output low range  
PAT output full stroke time/DAT cycle  
PAT deadband  
8
9
Output high limit  
Output low limit  
10  
11  
12  
13  
14  
15  
OFL  
Output % value in forcing mode  
Output module output value %  
Logic output control and status  
DDC increase logic connection  
DDC decrease logic connection  
Limit function enable logic connection  
OUT  
DOC  
INC@  
DEC@  
ENL@  
Extension Modules  
Relative Item  
0
1
2
3
4
5
6
Signal Condition  
Word  
Word  
Word  
Byte  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Read/Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Johnson Tag  
XTIOMAP  
XTIOTYP  
XTIOMOD  
XTADX  
XTI1@  
XTI2@  
XTI3@  
XTI4@  
XTI5@  
XTI6@  
XTI7@  
XTI8@  
XTHR01  
XTLR01  
XTHR02  
XTLR02  
XTHR03  
XTLR03  
XTHR04  
XTLR04  
XTHR05  
XTLR05  
XTHR06  
XTLR06  
XTHR07  
XTLR07  
XTHR08  
XTLR08  
XTHIA1  
XTLOA1  
XTHIA2  
XTLOA2  
XTHIA3  
XTLOA3  
XTHIA4  
XTLOA4  
XTHIA5  
XTLOA5  
Description  
Extension module I/O map  
Extension module I/O type  
Extension module I/O mode  
Extension module address 0-255  
Point connection - I1  
Point connection - I2  
Point connection - I3  
Point connection - I4  
Point connection - I5  
7
8
9
Point connection - I6  
Point connection - I7  
Point connection - I8  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
High output range point 1  
Low output range point 1  
High output range point 2  
Low output range point 2  
High output range point 3  
Low output range point 3  
High output range point 4  
Low output range point 4  
High output range point 5  
Low output range point 5  
High output range point 6  
Low output range point 6  
High output range point 7  
Low output range point 7  
High output range point 8  
Low output range point 8  
High alarm limit point 1  
Low alarm limit point 1  
High alarm limit point 2  
Low alarm limit point 2  
High alarm limit point 3  
Low alarm limit point 3  
High alarm limit point 4  
Low alarm limit point 4  
High alarm limit point 5  
Low alarm limit point 5  
FP  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 31 of 51  
Extension Modules  
Read/Write Johnson Tag  
Relative Item  
Signal Condition  
FP  
FP  
FP  
FP  
FP  
FP  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
LONG  
Byte  
Byte  
Byte  
Byte  
Description  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
Write  
Write  
Write  
Write  
Write  
Write  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Read  
Read  
XTHIA6  
XTLOA6  
XTHIA7  
XTLOA7  
XTHIA8  
XTLOA8  
XTAIS  
XTAI1  
XTAI2  
XTAI3  
XTAI4  
High alarm limit point 6  
Low alarm limit point 6  
High alarm limit point 7  
Low alarm limit point 7  
High alarm limit point 8  
Low alarm limit point 8  
Extension module alarms  
Analog input value 1  
Analog input value 2  
Analog input value 3  
Analog input value 4  
Analog input value 5  
XTAI5  
XTAI6  
XTAI7  
XTAI8  
Analog input value 6  
Analog input value 7  
Analog input value 8  
XTAO1  
XTAO2  
XTAO3  
XTAO4  
XTAO5  
XTAO6  
XTAO7  
XTAO8  
XTDIC1  
XTDIC2  
XTDIC3  
XTDIC4  
XTDIC5  
XTDIC6  
XTDIC7  
XTDIC8  
XTCNT  
XTDO  
Analog output value 1  
Analog output value 2  
Analog output value 3  
Analog output value 4  
Analog output value 5  
Analog output value 6  
Analog output value 7  
Analog output value 8  
Digital input 1 pulse count  
Digital input 2 pulse count  
Digital input 3 pulse count  
Digital input 4 pulse count  
Digital input 5 pulse count  
Digital input 6 pulse count  
Digital input 7 pulse count  
Digital input 8 pulse count  
Extension module hold control  
Logic outputs control and status  
Logic inputs status  
XTDI  
XTSTC  
Extension module local status  
Time schedule modules  
Relative Item  
Signal Condition  
Read/Write  
Johnson Tag  
TSOPT  
TSEX@  
TSON@  
TSOF@  
TSXTM  
Description  
0
1
2
3
4
5
6
Word  
Word  
Word  
Word  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Time schedule options LSB  
External extension logical connection  
On forcing logical connection  
Off forcing logical connection  
Extension time (min)  
FP  
Byte  
TSTIM  
TSSTA  
Time to next event (min)  
Time schedule status  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 32 of 51  
Programmable modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
9
64  
160  
256  
352  
448  
544  
640  
736  
832  
928  
1024  
1120  
0040H  
00A0H  
0100H  
0160H  
01C0H  
0220H  
0280H  
02E0H  
0340H  
03A0H  
0400H  
0460H  
10  
11  
12  
Analog input modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
1216  
1232  
1248  
1264  
1280  
1296  
1312  
1328  
04C0H  
04D0H  
04E0H  
04F0H  
0500H  
0510H  
0520H  
0530H  
Analog output modules  
Module  
Module  
Version  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
2
1344  
1360  
0540H  
0550H  
or later (new for version 6.0):  
9
2304  
2320  
2336  
2352  
2368  
2384  
0900H  
0910H  
0920H  
0930H  
0940H  
0950H  
10  
11  
12  
13  
14  
Digital output modules  
Module  
Module  
Module  
Module  
Module  
Module  
3
4
5
6
7
8
1376  
1392  
1408  
1424  
1440  
1456  
0560H  
0570H  
0580H  
0590H  
05A0H  
05B0H  
Extension modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
1472  
1552  
1632  
1712  
1792  
1872  
1952  
2032  
05C0H  
0610H  
0660H  
06B0H  
0700H  
0750H  
07A0H  
07F0H  
Time schedule modules  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
Module  
1
2
3
4
5
6
7
8
2112  
2128  
2144  
2160  
2176  
2192  
2208  
2224  
0840H  
0850H  
0860H  
0870H  
0880H  
0890H  
08A0H  
08B0H  
Optimal start / stop module  
Module  
Module  
1
2
2240  
2272  
08C0H  
08E0H  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 33 of 51  
Appendix D.2. Metasys DC9100 Memory Map  
Note: The DC9100 is not currently supported by the FieldServer MetasysN2 Driver.  
The information below is for interest and future use only.  
PAGE 0  
Item  
DEC  
Item  
HEX  
Johnson  
Signal Condition Read/Write  
Description  
Tag  
Device model. Value always either 2 or  
12  
0
0 Byte  
Read  
MODL  
1
2
3
4
5
6
7
8
9
1 FP  
2 FP  
3 FP  
4 FP  
5 FP  
6 FP  
7 FP  
8 FP  
9 FP  
FP  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Read  
Write  
Write  
Write  
INP1  
INP2  
INP3  
INP4  
INP5  
INP6  
INP7  
INP8  
Analog input 1  
Analog input 2  
Analog input 3  
Analog input 4  
Analog input 5  
Analog input 6  
Analog input 7  
Analog input 8  
Numeric calculation modul result  
Numeric calculation modul result  
Numeric calculation modul result  
Numeric calculation modul result  
Remote constant 1  
Remote constant 2  
Remote constant 3  
Remote constant 4  
Control output 1  
Control output 2  
Control output 3  
Control output 4  
Control output 5  
NCM1  
NCM2  
NCM3  
NMC4  
REC1  
REC2  
REC3  
REC4  
OUT1  
OUT2  
OUT3  
OUT4  
OUT5  
OUT6  
OUT7  
OUT8  
WSP1  
WSP2  
WSP3  
WSP4  
WSP5  
WSP6  
WSP7  
WSP8  
STW1  
STW2  
STW3  
STW4  
STW5  
STW6  
STW7  
STW8  
DOUT  
CHLD  
COMP  
10 A  
11 B  
12 C  
13 D  
14 E  
15 F  
16  
17  
18  
19  
20  
FP  
FP  
FP  
FP  
FP  
10 FP  
11 FP  
12 FP  
13 FP  
14 FP  
15 FP  
16 FP  
17 FP  
18 FP  
19 FP  
FP  
21  
22  
23  
24  
Control output 6  
Control output 7  
Control output 8  
25  
Working setpoint 1  
Working setpoint 2  
Working setpoint 3  
Working setpoint 4  
Working setpoint 5  
Working setpoint 6  
Working setpoint 7  
Working setpoint 8  
Status word 1  
Status word 2  
Status word 3  
Status word 4  
Status word 5  
Status word 6  
Status word 7  
Status word 8  
Logic output DDC control  
Hold mode control  
Supervisory mode control  
26 1A  
27 1B  
28 1C  
29 1D  
30 1E  
31 1F  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42 2A  
43 2B  
FP  
FP  
FP  
FP  
FP  
20 FP  
21 Word  
22 Word  
23 Word  
24 Word  
25 Word  
26 Word  
27 Word  
28 Word  
29 Word  
Byte  
Byte  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 34 of 51  
PAGE 0  
Johnson  
Tag  
Item  
DEC  
Item  
HEX  
Signal Condition Read/Write  
Description  
44 2C  
45 2D  
46 2E  
47 2F  
48  
-
-
-
-
Spare  
Spare  
PV1@  
RS1@  
RV1@  
PB1@  
OF1@  
Byte  
Byte  
Write  
Write  
Write  
Write  
Write  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
Reverse action logic control connection  
External forcing logic control  
connection  
30 Byte  
31 Byte  
32 Byte  
49  
50  
51  
52  
53  
33 Byte  
34 Byte  
35 Byte  
Write  
Write  
Write  
SB1@  
RA1@  
EF1@  
54  
55  
56  
57  
58 3A  
59 3B  
60 3C  
61 3D  
62 3E  
63 3F  
64  
36 Byte  
37 FP  
38 FP  
39 FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE1  
LS1  
PB1  
TI1  
TD1  
HL1  
LL1  
BS1  
BO1  
Controller type  
Local setpoint  
Proportional band  
Reset action  
Rate action  
FP  
FP  
FP  
FP  
Upper limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
Deviation alarm  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
FP  
AD1  
40 Byte  
41 Byte  
42 Byte  
43 Byte  
44 Byte  
PV2@  
RS2@  
RV2@  
PB2@  
OF2@  
65  
66  
67  
68  
69  
70  
71  
45 Byte  
46 Byte  
47 Byte  
Write  
Write  
Write  
SB2@  
RA2@  
EF2@  
Reverse action logic control connection  
External forcing logic control  
connection  
72  
73  
48 Byte  
49 FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE2  
LS2  
PB2  
TI2  
TD2  
HL2  
LL2  
LL2  
BS2  
Controller type  
Local setpoint  
Proportional band  
Reset action  
74 4A  
75 4B  
76 4C  
77 4D  
78 4E  
78 4E  
79 4F  
80  
81  
82  
83  
84  
FP  
FP  
FP  
FP  
FP  
FP  
Rate action  
Upper limit of the control output  
Lower limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
Deviation alarm  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
50 FP  
51 FP  
52 Byte  
53 Byte  
54 Byte  
55 Byte  
56 Byte  
BO2  
AD2  
PV3@  
RS3@  
RV3@  
PB3@  
OF3@  
85  
86  
87  
88  
57 Byte  
58 Byte  
Write  
Write  
SB3@  
RA3@  
Reverse action logic control connection  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 35 of 51  
PAGE 0  
Johnson  
Tag  
Item  
DEC  
Item  
HEX  
Signal Condition Read/Write  
Description  
External forcing logic control  
connection  
89  
59 Byte  
Write  
EF3@  
90 5A  
91 5B  
92 5C  
93 5D  
94 5E  
95 5F  
96  
97  
98  
99  
100  
Byte  
FP  
FP  
FP  
FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE3  
LS3  
PB3  
TI3  
TD3  
HL3  
LL3  
BS3  
BO3  
Controller type  
Local setpoint  
Proportional band  
Reset action  
Rate action  
Upper limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
Deviation alarm  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
60 FP  
61 FP  
62 FP  
63 FP  
64 Byte  
65 Byte  
66 Byte  
67 Byte  
68 Byte  
AD3  
PV4@  
RS4@  
RV4@  
PB4@  
OF4@  
101  
102  
103  
104  
105  
69 Byte  
Byte  
Write  
Write  
Write  
SB4@  
RA4@  
EF4@  
106 6A  
107 6B  
Reverse action logic control connection  
External forcing logic control  
connection  
Byte  
108 6C  
109 6D  
110 6E  
111 6F  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122 7A  
Byte  
FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE4  
LS4  
PB4  
TI4  
TD4  
HL4  
LL4  
BS4  
BO4  
Controller type  
Local setpoint  
Proportional band  
Reset action  
FP  
70 FP  
71 FP  
72 FP  
73 FP  
74 FP  
75 FP  
76 Byte  
77 Byte  
78 Byte  
79 Byte  
Byte  
Rate action  
Upper limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
Deviation alarm  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
AD4  
PV5@  
RS5@  
RV5@  
PB5@  
OF5@  
123 7B  
124 7C  
125 7D  
Byte  
Byte  
Byte  
Write  
Write  
Write  
SB5@  
RA5@  
EF5@  
Reverse action logic control connection  
External forcing logic control  
connection  
126 7E  
127 7F  
128  
129  
130  
131  
132  
133  
134  
Byte  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE5  
LS5  
PB5  
TI5  
TD5  
HL5  
LL5  
BS5  
BO5  
Controller type  
Local setpoint  
Proportional band  
Reset action  
80 FP  
81 FP  
82 FP  
83 FP  
84 FP  
85 FP  
86 FP  
Rate action  
Upper limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 36 of 51  
PAGE 0  
Johnson  
Tag  
Item  
DEC  
Item  
HEX  
Signal Condition Read/Write  
Description  
135  
136  
137  
138 8A  
139 8B  
140 8C  
87 FP  
Write  
Write  
Write  
Write  
Write  
Write  
AD5  
Deviation alarm  
88 Byte  
89 Byte  
Byte  
PV6@  
RS6@  
RV6@  
PB6@  
OF6@  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
Reverse action logic control connection  
External forcing logic control  
connection  
Byte  
Byte  
141 8D  
142 8E  
143 8F  
Byte  
Byte  
Byte  
Write  
Write  
Write  
SB6@  
RA6@  
EF6@  
144  
145  
146  
147  
148  
149  
150  
151  
90 Byte  
91 FP  
92 FP  
93 FP  
94 FP  
95 FP  
96 FP  
97 FP  
98 FP  
99 FP  
Byte  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE6  
LS6  
PB6  
TI6  
TD6  
HL6  
LL6  
BS6  
BO6  
Controller type  
Local setpoint  
Proportional band  
Reset action  
Rate action  
Upper limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
Deviation alarm  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
152  
153  
AD6  
154 9A  
155 9B  
156 9C  
157 9D  
158 9E  
PV7@  
RS7@  
RV7@  
PB7@  
OF7@  
Byte  
Byte  
Byte  
Byte  
159 9F  
160 A0  
161 A1  
Byte  
Byte  
Byte  
Write  
Write  
Write  
SB7@  
RA7@  
EF7@  
Reverse action logic control connection  
External forcing logic control  
connection  
162 A2  
163 A3  
164 A4  
165 A5  
166 A6  
167 A7  
168 A8  
169 A9  
170 AA  
171 AB  
172 AC  
173 AD  
174 AE  
175 AF  
176 B0  
Byte  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE7  
LS7  
PB7  
TI7  
TD7  
HL7  
LL7  
BS7  
BO7  
Controller type  
Local setpoint  
Proportional band  
Reset action  
Rate action  
Upper limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
Deviation alarm  
Process variable connection  
Remote setpoint connection  
Reference variable connection  
Proportional band connection  
OFF mode logic control connection  
STAND-BY mode logic control  
connection  
FP  
AD7  
Byte  
Byte  
Byte  
Byte  
Byte  
PV8@  
RS8@  
RV8@  
PB8@  
OF8@  
177 B1  
178 B2  
179 B3  
Byte  
Byte  
Byte  
Write  
Write  
Write  
SB8@  
RA8@  
EF8@  
Reverse action logic control connection  
External forcing logic control  
connection  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 37 of 51  
PAGE 0  
Johnson  
Tag  
Item  
DEC  
Item  
HEX  
Signal Condition Read/Write  
Description  
180 B4  
181 B5  
182 B6  
183 B7  
184 B8  
185 B9  
186 BA  
187 BB  
188 BC  
189 BD  
190 BE  
191 BF  
192 C0  
193 C1  
194 C2  
195 C3  
196 C4  
197 C5  
198 C6  
199 C7  
200 C8  
201 C9  
202 CA  
203 CB  
204 CC  
205 CD  
206 CE  
207 CF  
208 D0  
209 D1  
210 D2  
211 D3  
212 D4  
213 D5  
214 D6  
215 D7  
216 D8  
217 D9  
218 DA  
219 DB  
220 DC  
221 DD  
222 DE  
223 DF  
224 E0  
225 E1  
226 E2  
227 E3  
228 E4  
229 E5  
230 E6  
Byte  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
Byte  
FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
TYPE8  
LS8  
PB8  
TI8  
TD8  
HL8  
LL8  
BS8  
BO8  
AD8  
IR1  
HA1  
LA1  
FI1  
Controller type  
Local setpoint  
Proportional band  
Reset action  
Rate action  
Upper limit of the control output  
Lower limit of the control output  
Change of setpoint during STAND-BY  
Change of setpoint during OFF  
Deviation alarm  
Range analog input 1  
High alarm input 1  
Low alarm input 1  
Filter time input 1  
Range analog input 2  
High alarm input 2  
Low alarm input 2  
Filter time input 2  
Range analog input 3  
High alarm input 3  
Low alarm input 3  
Filter time input 3  
Range analog input 4  
High alarm input 4  
Low alarm input 4  
Filter time input 4  
Range analog input 5  
High alarm input 5  
Low alarm input 5  
Filter time input 5  
Range analog input 6  
High alarm input 6  
Low alarm input 6  
Filter time input 6  
Range analog input 7  
High alarm input 7  
Low alarm input 7  
Filter time input 7  
Range analog input 8  
High alarm input 8  
IR2  
HA2  
LA2  
FI2  
IR3  
HA3  
LA3  
FI3  
IR4  
HA4  
LA4  
FI4  
IR5  
HA5  
LA5  
FI5  
IR6  
HA6  
LA6  
FI6  
IR7  
HA7  
LA7  
FI7  
IR8  
HA8  
LA8  
FI8  
Low alarm input 8  
Filter time input 8  
FP  
FP  
FP  
Byte  
FP  
FP  
Byte  
FP  
FP  
Byte  
OH1  
OL1  
OMS1  
OH2  
OL2  
OMS2  
OH3  
OL3  
OMS3  
Output 1 high range  
Output1 low range  
Source of analog output module 1  
Output 2 high range  
Output 2 low range  
Source of analog output module 2  
Output OUTA1 high range  
Output OUTA1 low range  
Source of logic output module OUTA  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 38 of 51  
PAGE 0  
Johnson  
Tag  
Item  
DEC  
Item  
HEX  
Signal Condition Read/Write  
Description  
231 E7  
232 E8  
233 E9  
234 EA  
235 EB  
236 EC  
237 ED  
238 EE  
239 EF  
240 F0  
241 F1  
242 F2  
243 F3  
244 F4  
245 F5  
246 F6  
247 F7  
248 F8  
249 F9  
250 FA  
251 FB  
252 FC  
253 FD  
254 FE  
255 FF  
Byte  
Byte  
FP  
FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
OMS4  
OMTY1  
FST1  
DB1  
OH5  
OL5  
OMS5  
OMS6  
OMTY2  
FST2  
DB2  
Source of logic output module OUTB  
Output module type  
PAT/DAT output 1 timing  
Dead band PAT output 1  
Output OUTA2 high range  
Output OUTA2 low range  
Source of logic output module OUTA  
Source of logic output module OUTB  
Output module type  
PAT/DAT output 2 timing  
Dead band PAT output 2  
Output OUTA3 high range  
Output OUTA3 low range  
Source of logic output module OUTA  
Source of logic output module OUTB  
Output module type  
PAT/DAT output 3 timing  
Dead band PAT output 3  
Symmetry band controller module 5  
Symmetry band controller module 6  
Alarm disable condition source  
DC type settings  
FP  
Byte  
Byte  
Byte  
FP  
FP  
FP  
OH7  
OL7  
FP  
Byte  
Byte  
Byte  
FP  
FP  
FP  
OMS7  
OMS8  
OMty3  
FST3  
DB3  
SB1  
SB2  
FP  
Byte  
Byte  
Byte  
FP  
ALDIS  
RCTY1  
ALGT  
COS1  
COS2  
Standard algorithm type  
Spare constant  
Spare constant  
FP  
PAGE 1  
Relative Item Signal Condition Read/Write Johnson Tag Description Relative Item  
0
1
2
3
4
5
6
7
0 FP  
1 FP  
2 FP  
3 FP  
4 FP  
5 FP  
6 FP  
7 FP  
8 FP  
9 FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
HR1  
LR1  
HR2  
LR2  
HR3  
LR3  
HR4  
LR4  
HR5  
LR5  
HR6  
LR6  
HR7  
LR7  
HR8  
LR8  
OM%1  
OM%2  
OM%3  
OM%4  
OM%5  
OM%6  
OM%7  
OM%8  
High range analog input 1  
Low range analog input 1  
High range analog input 2  
Low range analog input 2  
High range analog input 3  
Low range analog input 3  
High range analog input 4  
Low range analog input 4  
High range analog input 5  
Low range analog input 5  
High range analog input 6  
Low range analog input 6  
High range analog input 7  
Low range analog input 7  
High range analog input 8  
Low range analog input 8  
Output % Output module 1  
Output % Output module 2  
Output % Output module 3  
Output % Output module 4  
Output % Output module 5  
Output % Output module 6  
Output % Output module 7  
Output % Output module 8  
8
9
10 A  
11 B  
12 C  
13 D  
14 E  
15 F  
16  
17  
18  
19  
20  
FP  
FP  
FP  
FP  
FP  
10 FP  
11 FP  
12 FP  
13 FP  
14 FP  
15 FP  
16 FP  
17 FP  
21  
22  
23  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 39 of 51  
Optimal start / stop module  
Relative Item Signal Condition Read/Write Johnson Tag Description  
0
1
2
3
4
5
6
7
Byte  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
OSOPT  
OSZT@  
OSOT@  
OSSP@  
OSOB@  
OSDI@  
OSDA@  
OSTS@  
OSNX@  
OSTIM@  
OSPURGE  
OSMAXST  
OSMAXSO  
OSBHK  
OSBCK  
OSSBHK  
OSSBCK  
OSFW  
Module options  
Zone temperature connection  
Outdoor temperature connection  
Zone temperature setpoint connection  
Off setpoint bias connection  
Disable module connection  
Disable adaptive action connection  
Connection at time schedule output  
Connection at next output  
8
9
Connection at time to next output  
Minimum cool / heat time (min)  
Maximum start up time (min)  
Maximum shut down time (min)  
Start mode building heating factor  
Start mode building cooling factor  
Stop mode building heating factor  
Stop mode building cooling factor  
Percentage adaptive control (filter weight)  
Outdoor heating design temperature  
Outdoor cooling design temperature  
Control range  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
OSHTD  
OSCTD  
OSCRNG  
OSSP  
OSOB  
OSTIM  
FP  
FP  
FP  
FP  
FP  
Byte  
Zone temperature on setpoint  
Zone temperature off setpoint  
Remaining time to next event  
Operating status  
OSSTA  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 40 of 51  
Appendix D.3. Metasys TC9100 Memory Map  
Note: The TC9100 is not currently supported by the FieldServer MetasysN2 Driver.  
The information below is for interest and future use only.  
General dynamic Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
0
1
2
3
Byte  
FP  
FP  
FP  
FP  
Read  
Write  
Write  
Write  
Write  
UNIT  
AI1  
AI2  
AI3  
AI4  
Device model. For TC-9100 always 06h  
Process Temperature  
Remote Temperature Set Point Bias  
Pressure  
4
Override Input  
5
Spare  
6
Spare  
7
Spare  
8
Spare  
9
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Read  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Write  
Read  
Read  
Read  
ADC  
Selected Analog Input ADC counter  
Output Programmable Module #1  
Output Programmable Module #2  
Output Programmable Module #3  
Output Programmable Module #4  
Output Programmable Module #5  
Output Programmable Module #6  
Working Set Point Control Module 1  
Working Set Point Control Module 2  
Working Set Point Control Module 3  
Working Set Point Control Module 4  
Working Set Point Control Module 5  
Working Set Point Control Module 6  
External Analog Input 1  
External Analog Input 2  
External Analog Input 3  
External Analog Input 4  
Analog Constant 5  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
OCM1  
OCM2  
OCM3  
OCM4  
OCM5  
OCM6  
WSP1  
WSP2  
WSP3  
WSP4  
WSP5  
WSP6  
XAI1  
XAI2  
XAI3  
XAI4  
ACO5  
ACO6  
WAC  
SAC  
ALR  
AIH1  
FP  
FP  
FP  
FP  
Analog Constant 6  
Winter Authority Correction  
Summer Authority Correction  
Analog Inputs Alarm Status  
Analog Input 1 High alarm  
Analog Input 1 High alarm  
Analog Input 2 High alarm  
Analog Input 2 Low alarm  
Analog Input 3 High alarm  
Analog Input 3 Low alarm  
Analog Input 4 High alarm  
Analog Input 4 Low alarm  
Not used  
Not used  
Not used  
Not used  
Not used  
Not used  
Not used  
Not used  
Logic Output Status  
Word  
W(1)  
W(2)  
W(3)  
W(4)  
W(5)  
W(6)  
W(7)  
W(8)  
W(9)  
W(10)  
W(11)  
W(12)  
W(13)  
W(14)  
W(15)  
W(16)  
Byte  
B(1)  
B(2)  
B(3)  
AIL1  
AIH2  
AIL2  
AIH3  
AIL3  
AIH4  
AIL4  
31  
Read  
LOS  
DO3  
DO4  
DO5  
TRIAC 3 ON  
TRIAC 4 ON  
TRIAC 5 ON  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 41 of 51  
General dynamic Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
B(4)  
B(5)  
B(6)  
B(7)  
B(8)  
Byte  
B(1)  
DO6  
DO7  
DO1  
DO2  
TRIAC 6 ON  
TRIAC 7 ON  
TRIAC 1 ON  
TRIAC 2 ON  
Not used  
32  
Read  
ROS  
MODS  
TC9100 Operation Status  
00 = Night mode  
01 = Stand-by mode  
10 = Comfort mode  
11 = OFF mode  
Temporary mode  
Alternate mode  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
B(7)  
B(8)  
Byte  
B(1)  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
B(7)  
Byte  
B(1)  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
B(7)  
Byte  
B(1)  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
Byte  
B(1)  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
MODT  
MODA  
Supervisory mode enabled  
Window open  
WIN  
OCC  
AIRQ  
MSK  
Occupancy Sense  
Air Quality Sense  
Outputs Central Control - Enable  
Enable TRIAC 3  
Enable TRIAC 4  
Enable TRIAC 5  
Enable TRIAC 6  
Enable TRIAC 7  
Enable TRIAC 1  
Enable TRIAC 2  
Outputs Central Control - Set Level  
TRIAC 3 ON  
TRIAC 4 ON  
TRIAC 5 ON  
TRIAC 6 ON  
TRIAC 7 ON  
TRIAC 1 ON  
TRIAC 2 ON  
Control Loops Hold  
Loop #1 Hold  
Loop #2 Hold  
Loop #3 Hold  
Loop #4 Hold  
Loop #5 Hold  
Loop #6 Hold  
Computer mode Control  
Loop #1 Hold WSP override  
Loop #2 Hold WSP override  
Loop #3 Hold WSP override  
Loop #4 Hold WSP override  
Loop #5 Hold WSP override  
Loop #6 Hold WSP override  
33  
34  
Write  
Write  
DO3E  
DO4E  
DO5E  
DO6E  
DO7E  
DO1E  
DO2E  
ODC  
DO3C  
DO4C  
DO5C  
DO6C  
DO7C  
DO1C  
DO2C  
HLD  
35  
36  
Write  
Write  
HLD  
37  
Byte  
B(1)  
Write  
SUP  
MODC  
Supervisory Mode Control  
00 = Night mode request  
01 = Stand-by mode request  
10 = Comfort mode request  
11 = OFF mode request  
Shut-Off mode request  
Start-Up mode request  
Not used  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
B(7)  
SOFF  
STUP  
Supervisory Mode Control  
Manual OP Mode  
MAN  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 42 of 51  
General dynamic Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
B(8)  
Byte  
B(1)  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
B(7)  
B(8)  
FP  
Byte  
Byte  
Byte  
Word  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Byte  
Byte  
Byte  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Byte  
Byte  
Byte  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Supervisory System Active Refresh  
Control & status  
Maintenance Started  
Maintenance Stopped  
Reverse Action  
38  
Read  
LSC  
MNT  
RAS  
Loop #1 Active  
Intrusion Alarm  
IAS  
AFM  
FOS  
Anti freezing Mode Active  
Three speed Fan Override Real Status  
Loop #3 Active  
Constant K1 Module #1  
Input Connection I1@  
Input Connection I2@  
Input Connection I3@  
Options  
Constant K2  
Constant K3  
Constant K4  
Constant K5  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
Write  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
PM1K1  
PM1I@1  
PM1I@2  
PM1I@3  
PM1TYP  
PM1K2  
PM1K3  
PM1K4  
PM1K5  
PM1K6  
PM1K7  
PM2K1  
PM2I@1  
PM2I@2  
PM2I@3  
PM2TYP  
PM2K2  
PM2K3  
PM2K4  
PM2K5  
PM2K6  
PM2K7  
PM3K1  
PM3I@1  
PM3I@2  
PM3I@3  
PM3TYP  
PM3K2  
PM3K3  
PM3K4  
PM3K5  
PM3K6  
PM3K7  
PM4K1  
PM4I@1  
PM4I@2  
PM4I@3  
PM4TYP  
PM4K2  
PM4K3  
PM4K4  
PM4K5  
PM4K6  
PM4K7  
PM5K1  
PM5I@1  
PM5I@2  
Constant K6  
Constant K7  
Constant K1 Module #2  
Input Connection I1@  
Input Connection I2@  
Input Connection I3@  
Options  
Constant K2  
Constant K3  
Constant K4  
Constant K5  
Constant K6  
Constant K7  
Constant K1 Module #3  
Input Connection I1@  
Input Connection I2@  
Input Connection I3@  
Options  
Constant K2  
Constant K3  
Constant K4  
Constant K5  
Constant K6  
Constant K7  
FP  
Constant K1 Module #4  
Input Connection I1@  
Input Connection I2@  
Input Connection I3@  
Options  
Constant K2  
Constant K3  
Constant K4  
Constant K5  
Constant K6  
Constant K7  
Constant K1 Module #5  
Input Connection I1@  
Input Connection I2@  
Byte  
Byte  
Byte  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Byte  
Byte  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 43 of 51  
General dynamic Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
Byte  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Byte  
Byte  
Byte  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
PM5I@3  
PM5TYP  
PM5K2  
PM5K3  
PM5K4  
PM5K5  
PM5K6  
PM5K7  
PM6K1  
PM6I@1  
PM6I@2  
PM6I@3  
PM6TYP  
PM6K2  
PM6K3  
PM6K4  
PM6K5  
PM6K6  
PM6K7  
Input Connection I3@  
Options  
Constant K2  
Constant K3  
Constant K4  
Constant K5  
Constant K6  
Constant K7  
Constant K1 Module #6  
Input Connection I1@  
Input Connection I2@  
Input Connection I3@  
Options  
Constant K2  
Constant K3  
Constant K4  
Constant K5  
100  
101  
102  
103  
104  
Constant K6  
Constant K7  
Input Output Config Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
105  
106  
107  
108  
109  
110  
111  
112  
113  
114  
115  
116  
Word  
Spare  
Spare  
FP  
FP  
FP  
FP  
FP  
FP  
FP  
Read  
VER  
Firmware Version  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
HIA1  
LOA1  
HIA2  
LOA2  
HIA3  
LOA3  
HIA4  
LOA4  
OCN1  
High Alarm AI1  
Low Alarm AI1  
High Alarm AI2  
Low Alarm AI2  
High Alarm AI3  
Low Alarm AI3  
High Alarm AI4  
Low Alarm AI4  
Output #1 Configuration  
FP  
Byte  
B(1)  
00001 Src of Module (Analog Items 1..31)  
?.  
B(5)  
B(6)  
11111  
000 = Not used  
001 = Output for Solenoids  
010 = 0 to 10 V Analog Output  
011 = ON/OFF Output  
100 = DAT Output Type  
101 = PAT Output Type  
110 = Multistage ON/OFF Type  
PAT/DAT Timing for Output Module #1  
Output #2 Configuration  
00001 Src of Module (Analog Items 1..31)  
?.  
B(8)  
FP  
Byte  
B(1)  
117  
118  
R/W  
R/W  
OCO1  
OCN2  
B(5)  
B(6)  
11111  
000 = Not used  
001 = Output for Solenoids  
010 = 0 to 10 V Analog Output  
011 = ON/OFF Output  
PAT Dead Band/Multistate Hysteresis #1  
Output #3 Configuration  
00001 Src of Module (Analog Items 1..31)  
?.  
B(8)  
FP  
Byte  
B(1)  
119  
120  
R/W  
R/W  
OCO2  
OCN3  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 44 of 51  
Input Output Config Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
B(5)  
B(6)  
11111  
000 = Not used  
011 = ON/OFF Output  
100 = DAT Output Type  
101 = PAT Output Type  
B(8)  
FP  
Byte  
B(1)  
110 = Multistage ON/OFF Type  
PAT/DAT Timing for Output Module #3  
Output #4 Configuration  
00001 Src of Module (Analog Items 1..31)  
?.  
121  
122  
R/W  
R/W  
OCO3  
OCN4  
B(5)  
B(6)  
11111  
000 = Not used  
011 = ON/OFF Output  
B(8)  
FP  
Byte  
B(1)  
123  
124  
R/W  
R/W  
OCO4  
OCN5  
PAT Dead Band/Multistate Hysteresis #3  
Output #5 Configuration  
00001 Src of Module (Analog Items 1..31)  
?.  
B(5)  
B(6)  
11111  
000 = Not used  
011 = ON/OFF Output  
100 = DAT Output Type  
101 = PAT Output Type  
110 = Multistage ON/OFF Type  
111 = Three Windings Control  
PAT/DAT Timg Outpt Mod #5 FSB-pnt #1  
Output #6 Configuration  
00001 Src of Module (Analog Items 1..31)  
?.  
B(8)  
FP  
Byte  
B(1)  
125  
126  
R/W  
R/W  
OCO5  
OCN6  
B(5)  
B(6)  
11111  
000 = Not used  
B(8)  
FP  
Byte  
B(1)  
127  
128  
R/W  
R/W  
OCO6  
OCN7  
PAT/DAT Timg Outpt Mod #5 FSB-pnt #2  
Output #7 Configuration  
00001 Src of Module (Analog Items 1..31)  
?.  
B(5)  
B(6)  
11111  
000 = Not used  
B(8)  
129  
130  
131  
132  
FP  
R/W  
OCO7  
Fan Speed Break-point #3  
spare  
Word  
Word  
W(1)  
W(2)  
W(3)  
W(4)  
W(5)  
W(6)  
W(8)  
W(9)  
W(10)  
W(11)  
W(12)  
W(13)  
R/W  
ALG  
XST  
Configuration Index 1  
Diagnostic Status  
Gain x 2 Jumper  
Integral Action Zeroing Jumper  
Zone 1 Jumper  
Zone 2 Jumper  
Dial Request Status  
Not used  
Intelligent Command Module Com Failure  
not valid  
not valid  
not valid  
not valid  
Write  
Read  
Read  
Read  
Read  
Clear  
DIAL  
Read  
Read  
Read  
Read  
Read  
Read  
XTAI1  
XTAI2  
XTAI3  
XTAI4  
EEPROM not protected  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 45 of 51  
Input Output Config Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
W(14)  
W(15)  
Read  
Read  
Reset Cycle indication  
00 = Power Up Reset  
01 = External Reset  
10 = Oscillator Failure  
11 = Watchdog Reset  
TC9100 Controller Options  
W(16)  
Word  
W(1)  
Read  
R/W  
133  
TCS2  
00 Select Analog Input 1 ADC  
to  
W(2)  
W(3)  
W(4)  
W(5)  
W(6)  
W(7)  
W(8)  
W(9)  
11 Select Analog Input 4 ADC  
TM9100 does not overrd the proc Variable  
Half Alternate Mode Timing  
0 = Celsius 1 = Fahrenheit  
0 = 50 Hz 1 = 60 Hz Power Line  
Enable Facilitator Mode  
TRIAC7 is ON if mode is Comfort  
Digital Input #1 Mode  
000 = Not used  
001 = Window Open  
010 = Occupancy Sensor  
011 = Air Quality Sensor  
100 = Reverse Action  
101 = Intrusion Alarm  
Negate Digital Input #1  
Digital Input #2 Mode  
000 = Not used  
W(11)  
W(12)  
W(13)  
001 = Window Open  
010 = Occupancy Sensor  
011 = Air Quality Sensor  
100 = Reverse Action  
101 = Intrusion Alarm  
Negate Digital Input #2  
Enable Jumper Options  
Enable Integral Zeroing Loop #1  
Enable Integral Zeroing Loop #2  
Enable Integral Zeroing Loop #3  
Enable Integral Zeroing Loop #4  
Enable Integral Zeroing Loop #5  
Enable Integral Zeroing Loop #6  
Not used  
W(15)  
W(16)  
Word  
W(1)  
W(2)  
W(3)  
W(4)  
W(5)  
W(6)  
W(7)  
W(8)  
W(9)  
W(10)  
W(11)  
W(12)  
W(13)  
W(14)  
Byte  
134  
R/W  
TCS3  
Not used  
Enable Gain Doubling Loop #1  
Enable Gain Doubling Loop #2  
Enable Gain Doubling Loop #3  
Enable Gain Doubling Loop #4  
Enable Gain Doubling Loop #5  
Enable Gain Doubling Loop #6  
Controller Options  
135  
Write  
TCS1  
B(1)  
Not used  
B(2)  
Not used  
B(3)  
Not used  
B(4)  
Not used  
B(5)  
Not used  
B(6)  
Not used  
B(7)  
Not used  
B(8)  
Word  
FP  
Default Action 1=Reverse  
Hardware Configuration  
High Range AI1  
136  
137  
R/W  
R/W  
HDW1  
HRI1  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 46 of 51  
Input Output Config Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
138  
139  
140  
141  
FP  
FP  
FP  
Byte  
B(1)  
R/W  
R/W  
R/W  
R/W  
LRI1  
Low Range AI1  
FTC1  
OFS1  
IOP1  
Filter Constant AI1  
Offset Compensation AI1  
Analog Input Options  
Controller reference  
1 to 6  
B(3)  
B(4)  
B(5)  
Input Type: 0=volt 1=resistance  
Input Mode  
000 - Linear Range  
001-Thermistor Linearization 2252.at 25C  
010 - Square Root  
011 - 0.2 suppression  
100-Thermistor Linearization 10 k. at 25C  
101 - Square Root & 20 % suppression  
Not used  
High Range AI2  
Low Range AI2  
B(7)  
B(8)  
FP  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
FP  
Byte  
FP  
FP  
FP  
142  
143  
144  
145  
146  
147  
148  
149  
150  
151  
152  
153  
154  
155  
156  
157  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
R/W  
Write  
HRI2  
LRI2  
FTC2  
OFS2  
IOP2  
HRI3  
LRI3  
FTC3  
OFS3  
IOP3  
HRI4  
LRI4  
FTC4  
OFS4  
IOP4  
OS  
Filter Constant AI2  
Offset Compensation AI2  
Analog Input Options (see IOP1)  
High Range AI3  
Low Range AI3  
Filter Constant AI3  
Offset Compensation AI3  
Analog Input Options (see IOP1)  
High Range AI4  
Low Range AI4  
Filter Constant AI4  
FP  
Offset Compensation AI4  
Analog Input Options (see IOP1)  
TC9100 Requested Operating Status  
00 = Night mode  
Byte  
Byte  
B(1)  
01 = Stand-by mode  
10 = Comfort mode  
11 = OFF mode  
Not used  
Not used  
Operating Mode Toggle: Base- Alternate  
Not used  
Force Operating Mode  
Command Module Active  
TM9100 Real Time Clk Synchronization  
Minutes 0..59  
B(2)  
B(3)  
B(4)  
B(5)  
B(6)  
B(7)  
B(8)  
Word  
W(1)  
158  
Write  
STIME  
RTC  
W(6)  
W(7)  
W(8)  
W(9)  
Spare  
Spare  
Hours 0..23  
RTC  
RTC  
W(13)  
W(14)  
Day of Week 1..7  
W(16)  
Byte  
FP  
159  
160  
161  
R/W  
Write  
Write  
OT@  
SPW  
SPS  
Outdoor Temperature Connection  
Winter set point  
Summer set point  
FP  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 47 of 51  
Input Output Config Parameters  
Relative Item Signal Condition Read/Write Johnson Tag Description  
162  
163  
164  
165  
166  
167  
FP  
FP  
Byte  
FP  
FP  
Write  
Write  
R/W  
Write  
R/W  
WA  
SA  
FT@  
FSP  
FDIF  
LOO  
Winter Authority Slope  
Summer Authority Slope  
Freeze Temperature connection  
Freeze set point  
Freeze Differential  
Word  
W(1)  
Write  
Read  
Input/Output Override Control  
Three Speed Fan Actual Speed  
00 = Output OFF  
01 = Speed #1  
10 = Speed #2  
W(2)  
W(3)  
W(4)  
W(5)  
Read  
11 = Speed #3  
Not used  
Three spd Fan Overrd Reqst by Hardware  
Fan Speed Reqst by Command Module  
00 = Output OFF  
Read  
Write  
FOS  
01 = Speed #1  
10 = Speed #2  
W(6)  
W(7)  
W(8)  
W(9)  
W(10)  
W(11)  
W(12)  
Word  
W(1)  
W(2)  
W(3)  
W(4)  
W(5)  
W(6)  
W(7)  
W(8)  
W(9)  
W(10)  
W(11)  
W(12)  
W(13)  
W(14)  
Word  
FP  
11 = Speed #3  
TM9100 Real Time Clk Refresh Request  
Three speed Fan Overrd Reqst Cmd Mod  
Analog Input #1 Override  
Analog Input #2 Override  
Analog Input #3 Override  
Analog Input #4 Override  
Control Loops Activity Mode  
Loop #1 Heating  
Loop #2 Heating  
Loop #3 Heating  
Loop #4 Heating  
Loop #5 Heating  
Loop #6 Heating  
Not used  
Not used  
Loop #1 Active  
Loop #2 Active  
Loop #3 Active  
Loop #4 Active  
Loop #5 Active  
FOR  
AIO1  
AIO2  
AIO3  
AIO4  
CLACT  
168  
Write  
Read  
Read  
Read  
Read  
Read  
Read  
Write  
Write  
Write  
Write  
Write  
Write  
R/W  
Loop #6 Active  
169  
170  
171  
ALG2  
WAL  
SAL  
Configuration Index 2  
Winter Authority Limit  
Summer Authority Limit  
R/W  
R/W  
FP  
Items Stored in the TM91xx External Database  
Relative Item Signal Condition Read/Write Johnson Tag Description  
256  
257  
258  
259  
260  
Byte  
FP  
FP  
Read  
Read  
Read  
Read  
Read  
UNIT  
TEMP  
RSP  
LOO  
JMP  
JMP1  
JMP2  
JMP3  
JMP4  
JMP5  
TIME  
Device Model : xxH  
Room Temperature  
Remote Temperature Set Point  
Copy of TC9100 Item LOO  
TM9100 Jumper Configuration & status  
Clock Setting Disable  
Word  
Byte  
B(1)  
B(2)  
B(3)  
B(4)  
B(5)  
Word  
W(1)  
Fan Setting Disable  
Time Schedule Setting Disable  
Model with Time Schedule  
Time Schedule Configuration Changed  
Real Time  
261  
Write  
RTC Minutes 0..59  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 48 of 51  
Items Stored in the TM91xx External Database  
Relative Item Signal Condition Read/Write Johnson Tag Description  
W(6)  
W(9)  
RTC Hours 0..23  
W(13)  
W(14)  
RTC Dy of Week 1..7  
W(16)  
TM91xx Daily Schedules:  
Relative Item Signal Condition Read/Write Johnson Tag Description  
271  
Word  
W(1)  
Write  
DST1  
Type of Daily Schedule #1  
Mode event 1  
00 = Set Night Mode  
01 = Set Comfort Mode  
10 = Set Stand-By Mode  
11 = Set OFF Mode  
W(2)  
W(3)  
Mode event 2 (Same Fmt. Mode event 1)  
Mode event 3 (Same Fmt. Mode event 1)  
Mode event 4 (Same Fmt. Mode event 1)  
Mode event 5 (Same Fmt. Mode event 1)  
W(4)  
W(5)  
W(6)  
W(7)  
W(8)  
W(9)  
W(10)  
W(11)  
Mode event 6 (Same Fmt. Mode event 1)  
Number of Days of activity 1..7  
W(12)  
W(13)  
W(15)  
Word  
Word  
Word  
272  
272  
272  
273  
287  
288  
289  
290  
291  
292  
303  
304  
305  
306  
307  
308  
319  
320  
321  
322  
323  
Write  
Write  
Write  
E12S1  
E34S1  
E56S1  
Event #1 & Event #2 Day #1  
Event #3 & Event #4 Day #1  
Event #5 & Event #6 Day #1  
Spare  
Spare  
Word  
Word  
Word  
Word  
Write  
Write  
Write  
Write  
DST2  
Type of Daily Schedule #2 (Fmt. #1)  
Event #1 & Event #2 Day #2  
Event #3 & Event #4 Day #2  
Event #5 & Event #6 Day #2  
Spare  
E12S2  
E34S2  
E56S2  
Spare  
Word  
Word  
Word  
Word  
Write  
Write  
Write  
Write  
DST3  
Type of Daily Schedule #3 (Fmt. #1)  
Event #1 & Event #2 Day #3  
Event #3 & Event #4 Day #3  
Event #5 & Event #6 Day #3  
Spare  
E12S3  
E34S3  
E56S3  
Spare  
Word  
Word  
Word  
Word  
Write  
Write  
Write  
Write  
DST4  
Type of Daily Schedule #4 (Fmt. #1)  
Event #1 & Event #2 Day #4  
Event #3 & Event #4 Day #4  
Event #5 & Event #6 Day #4  
E12S4  
E34S4  
E56S4  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 49 of 51  
TM91xx Daily Schedules:  
Relative Item Signal Condition Read/Write Johnson Tag Description  
324  
335  
336  
337  
338  
339  
340  
351  
352  
353  
354  
355  
356  
367  
368  
369  
370  
371  
372  
383  
Spare  
Spare  
Word  
Word  
Word  
Word  
Write  
Write  
Write  
Write  
DST5  
Type of Daily Schedule #5 (Fmt. #1)  
Event #1 & Event #2 Day #5  
Event #3 & Event #4 Day #5  
Event #5 & Event #6 Day #5  
Spare  
E12S5  
E34S5  
E56S5  
Spare  
Word  
Word  
Word  
Word  
Write  
Write  
Write  
Write  
DST6  
Type of Daily Schedule #6 (Fmt. #1)  
Event #1 & Event #2 Day #6  
Event #3 & Event #4 Day #6  
Event #5 & Event #6 Day #6  
Spare  
E12S6  
E34S6  
E56S6  
Spare  
Word  
Word  
Word  
Word  
Write  
Write  
Write  
Write  
DST7  
Type of Daily Schedule #7 (Fmt. #1)  
Event #1 & Event #2 Day #7  
Event #3 & Event #4 Day #7  
Event #5 & Event #6 Day #7  
Spare  
E12S7  
E34S7  
E56S7  
Spare  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Appendix E. Error Messages  
Page 50 of 51  
Error Message  
Description and Action  
Typically N2open Clients are configured to timeout after 200ms. If a  
FieldServer is configured as a Server the Server_Hold_Timeout time  
should be set to 0.175s or less otherwise the response will be suppressed.  
This message is printed if the Server_Hold_Timeout is set for >0.175s.  
MN2:#01 WARN.  
Server_Hold_Timeout is  
%0.3fs  
For N2Open Slave  
typical value is %0.3fs  
If the Client’s timeout is >200ms this message may be ignored.  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FS-8700-19_Metasys_N2 Driver Manual  
Page 51 of 51  
THIS PAGE INTENTIONALLY LEFT BLANK  
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com  
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970 email: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Portable Speaker SPA75 User Manual
Escort Radar Detector 8500CI User Manual
FEIN Power Tools Impact Driver ASB 647 1 User Manual
FoodSaver Food Saver GameSaver Pro User Manual
Frigidaire Washer 134305500A User Manual
Fujitsu Photo Scanner C150 E141 02EN User Manual
GE Air Conditioner 000 BTU models User Manual
GE Monogram Headphones 98970 User Manual
GE Photo Scanner PP972SM User Manual
Gitzo Camcorder Accessories GS5511S User Manual