®
Powershred Personal Series
Operating Instructions
Mode d’emploi
A
B
C
D
E
F
Instrucciones de funcionamiento
Bedienungsanleitung
Bedieningsinstructies
Istruzioni sul funzionamento
Models:
PS25
PS50
PS25
PS30
PS50 Plus
PS55
PS30 Plus
PS40
PS55CC
PS45
DM-3
PS35
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
PS25
PS25 Plus
PS30
PS30 Plus
PS35/ PS40
• Follow instructions for sheet capacity. (See Table A)
• Position paper over entry.
• Depress power switch to the ON (I) position to start cutting system.
• Return the power switch to the OFF (O) position to stop cutting system.
PS50
• Follow instructions for sheet capacity. (See Table A)
PS50 Plus
PS55*
• Depress the power switch to the ON (I) position to activate the standby mode.
*Green Ready light will come on if model has indicator lights.
PS55CC*
DM-3*/ PS45*
• Shredder automatically starts when paper is placed in the entry and stops when
finished shredding.
Cleaning
A
B
C
D
E
F
• Unplug the unit from the wall before cleaning.
All Models
• Housing can be cleaned with a cloth, dampened with a mild soap and water solution.
Sheet Capacity and Usage
• Do not exceed recommended sheet capacity for your model.
• Folding paper to fit the entry increases the thickness and recommended capacity may be exceeded.
• Clips and staples increase the thickness and may decrease sheet capacity.
US 20# Paper
64 GSM
80 GSM
80 GSM
Model:
Sheets per Pass
Sheets per Pass Sheets per Pass Sheets per Pass
120V/ 50Hz
100V/ 50Hz
230V/ 50Hz
240V/ 50Hz
PS55CC
3
5
N/ A
7
N/ A
5
N/ A
5
PS25
PS25 Plus
PS 30
5
7
5
5
5
7
5
5
PS30 Plus
PS35 & PS40
PS50
5
7
5
5
5
7
5
5
5
7
5
5
PS50 Plus
PS55 (non-100/ 120V)
PS55 (100/ 120V)
DM-3/ PS45
5
7
5
5
N/ A
7
N/ A
7
5
5
N/ A
N/ A
N/ A
N/ A
7
7
Different paper weights and electrical currents will affect capacity.
3
TABLE A
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety & Maintenance of PS55CC
The PS55CC cross cut shredder creates small particles that, if allowed to accumulate, cause the shredder to jam.
Follow these simple precautions to significantly reduce the likelihood that particles will accumulate and to keep your
cross cut shredder operating at peak efficiency:
• Do not allow the basket to overfill. The power of this shredder will compress paper particles into the basket even
when it is full. The life of your shredder may be reduced if the cutting system continues to operate with particles
packed around it.
• Reverse the shredder often. Reversing helps the shredder flush out small cut particles. Empty basket if it is full
before reversing.
Oil the cutters:
When...
• Every second or third time you empty the basket;
• If the shredder’s cutting capacity is diminished;
• If the cutting cylinders stop with a squeak or a rubbing sound after power is removed.
How...
Use Powershred Lubricant #35250 or a suitable alternative with an extension nozzle. Alternatives can be 3 in 1 or
Sewing Machine Oil. Oil must be non-flammable material and a non-degreaser! Do not use a can spray. Accelerants
are combustible. See order form in this manual.
A
B
C
D
E
F
Squeeze the lubricant across the full width of the cutters and then turn the machine on and run the cutting system
forward for a few seconds. (Since cross-cut machines have auto start, it will be necessary to block the photo eye with
a piece of paper in order to run the cutting system forward).
Then, depress the reverse button and run the cutting system for a few seconds. Repeat the procedure.
Safety of PS55CC
• Do not operate PS55CC without the basket it was shipped with.
• Do not use without the safety flap. Injury may result.
• Do not attempt to defeat the safety interlock switch.
Paper Jams
1. Immediately return power switch to OFF (O) position.
2. Depress power switch to the REVERSE (R) position until the jammed paper has been fully removed from the cutter.
3. DO NOT PULL ON PAPER. Damage to the drive system could occur.
4. If the REVERSE (R) function will not operate when pressed, the internal overload protection device has been
activated. Release the power switch from the REVERSE (R) POSITION, wait 15 seconds and repeat.
5. If the machine jams in reverse, unplug the unit and cut all excess paper off the top and bottom of the machine
before repeating the jam-clearing procedure.
6. Shred smaller quantities. See sheet capacity (Table A).
Model
When operating this product, you must use the enclosed power supply.
Failure to do so will void the manufacturer’s warranty and may damage the unit.
North America
Europe
Australia
Japan
UK
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Red light = capacity exceeded.
1. Empty the basket if it is full.
DM-3
PS45
PS55
2. Reverse out the paper being fed into the shredder.
3. Divide the paper being shred into smaller packets that are within the stated
capacity of the shredder.
4. If the jam persists, slowly move the shredder’s power switch back and forth
between FORWARD (I) and REVERSE ( R ), always stopping for a moment in the
OFF position (O). Rapid switching can create force that will damage your
shredder.
PS55CC
5. See “Maintenance of PS55CC Cross Cut Shredder.”
PS55CC only
Parts Identification
Wastebaskets not included with some models.
1. Power Jack or Power Cord
2. Power Switch
4. Paper Entry
5. Wastebasket
6. Indicator Lights (on select models)
1
3. Housing
3
A
B
C
D
E
F
¤
2
4
1
6
2
4
3
5
PS25, PS30, PS50
5
PS35, PS40, PS45,
PS55, PS55CC, DM-3
Overload Protection
Important Note
This shredder is protected by a built-in thermal overload
device that serves to protect the motor from overuse.
When continuous shredding is conducted for an extended
period of time, the shredder will automatically turn itself
off to cool down. When shredding is automatically
stopped, allow the unit to stand for about 30 minutes
before using it again.
This paper shredder is not intended to shred high volumes
of paper. Please refer to the specifications for the
recommended daily usage and sheet capacity of this
shredder. Please note that if the paper is wider than the
entry, and you fold it to fit, the paper thickness increases
and the recommended capacity may be exceeded.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Shred Size:
Specifications:
Entry width =
Power Source:
9” (230 mm)
PS55CC
5/ 32” x 4/ 5” (3.9mm x 20mm)
120V-60Hz (N. America)
240V-50Hz (Australia)
230V-50Hz (U.K., Europe)
100V-50HZ (Japan)
All others
7/ 32” (5.8mm) strip
Power Cord:
6 Feet (1.9 meters)
Model
PS25 Plus
PS30 Plus
PS40
Shredding Speed
20 fpm
Dimensions
Weight
8 lbs.
(3.6 kg)
9.25 lbs.
(4.2 kg)
15” x 16 1/ 2” x 10”
(380 x 419 x 254 mm)
17 1/ 4” x 14 3/ 4” x 10”
(438 x 375 x 254 mm)
(6 m/ min)
20 fpm
(6 m/ min)
PS35
PS25
PS30
PS50
20 fpm
(6 m/ min)
2 1/ 2” x 15” x 5”
(63.5 x 380 x 127 mm)
7 lbs.
(3.2 kg)
A
B
C
D
E
F
20 fpm
(6 m/ min)
20 fpm
(6 m/ min)
12 fpm
15” x 16 1/ 2” x 10”
(380 x 419 x 254 mm)
17 1/ 4” x 14 3/ 4” x 10”
(438 x 375 x 254 mm)
17 1/ 4” x 14 3/ 4” x 10”
(438 x 375 x 254 mm)
8 lbs.
PS50 Plus
(3.6 kg)
9.25 lbs
(4.2 kg)
9.5 lbs.
(4.3 kg)
PS55
DM-3/ PS45
PS55CC
(3.6 m/ min)
Limited Warranty
Fellowes Manufacturing Company warrants the cutting cylinders of all Fellowes shredders to be free from defects
in material and workmanship for five years from the date of purchase by the original consumer. Fellowes warrants all
other parts of the machine to be free of defects in material and workmanship for one year from the date of purchase
by the original consumer. If any part is found to be defective during the warrant period, your sole and exclusive
remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY,
INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any
consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You
may have other legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please contact Fellowes Customer Service at 1-800-955-
0959, Monday through Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on machines purchased outside the USA, contact the
appropriate location listed in the Contact for Service section of this instruction manual.
Warrantor: Fellowes Manufacturing Company.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Declaration of Conformity
Fellowes Manufacturing Company
Doncaster Road, Kirk Sandall
Doncaster, South Yorkshire, DN31H England
declares that the product
Models PS25, PS30, PS35 and PS40, with or without the suffix “Plus” conforms with the requirements of the Low
Voltage Directive (73/ 23 EEC) and the Electromagnetic Compatibility Directive (89/ 336 EEC) and the following
harmonized European Normes (EN Standards) and IEC Standards.
Safety: EN60950 ‘Information Technology Equipment’
EMC:
Standard
EN 55014
EN 61000-3-2
Severity Level
Table 1&2
Class A
Performance Criteria
N/ A
N/ A
Itasca, Illinois, USA
April 30, 1999
_____________________
Anthony Storrie
A
B
C
D
E
F
Declaration of Conformity
Fellowes Manufacturing Company
Doncaster Road, Kirk Sandall
Doncaster, South Yorkshire, DN31H England
declares that the product
Models PS50 and PS55, with or without the suffix “Plus”
conform with the requirements of the Low Voltage Directive (73/ 23 EEC) and the Electromagnetic Compatibility
Directive (89/ 336 EEC) and the following harmonized European Normes (EN Standards) and IEC Standards.
Safety: EN60950 ‘Information Technology Equipment’
EMC:
Standard
EN 55014
EN 55104
EN 61000-3-2
EN 61000-4-4
EN 61000-4-5
EN 61000-4-2
EN 61000-4-11
ENV 50141
Severity Level
Table 1&2
T. 5,2
Class A
Level 2
Performance Criteria
N/ A
N/ A
N/ A
B
Level 2
B
EN 55104 T.6,1
EN 55104 T.6,7
EN 55104 T.6,3
B
C
A
Itasca, Illinois, USA
April 30, 1999
_____________________
Anthony Storrie
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Helpline
Australia
Canada
1-800-33-11-77
1-800-665-4339
Mexico
001-800-234-1185
1-800-955-0959
United States
Europe
00 800 1810 1810
Fellowes Locations
Australia
Benelux
Canada
France
011-613 93303211
011-31-3473-77988
905-475-6320
+ 33 (0) 2-99-22-71-22
+ 49 (0) 5131-4977-0
+ 39 (0) 071-730041
011-81-3-5496-2401
82-2-3464-2884
Germany
Italy
Japan
Korea
Poland
+ 48-22-837-7356
65-6221-3811
Singapore
United Kingdom
+ 44 (0) 1302-836836
© 1999 Fellowes Printed in U.S.A. Part No. 35206
Download from Www.Somanuals.com. All Manuals Search And Download.
|