Food Processing Center
Use and Care Instruction Manual
Model EKP110
Read and Understand Instruction Manual Before Use
EURO-PRO Operating LLC
Boston, MA, 02465
1 (800) 798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations! As the owner of a new Food Processing Center, you are about to use a very
versatile and powerful kitchen appliance that will quickly become an indispensable item in
your kitchen. Euro-Pro products are engineered to meet the highest quality standards and are
designed to offer the ultimate in ease of operation and convenience.
IMPORTANT INFORMATION
Please read all the following instructions carefully.
IMPORTANT
For your protection, this appliance has a double safety switch so that it cannot run unless the
food processor lid (13) is locked in place and either the safety cover (2) or the blender (8) is
also locked in place.
PLEASE NOTE
A. To remove safety cover (2) or blender (8), you must first remove the processor lid (13).
B. To operate the food processor, the safety cover (2) must be properly locked in place.
C. To operate the blender (8), processor lid (13) must be locked in place.
D. When operating blender (8) make sure that all attachments are first removed from the food
processor bowl (11).
E. Do not attempt to use both blender and food processor at the same time.
F. Do not attempt to by-pass the cover (2) safety interlock mechanism or the main lid
interlock.
To remove the
blender, you must
first unlock and
remove the
processor lid (A).
Then unlock and
remove the
WARNING:
Always remove
the blender and fit
the safety cover
(2) into the
processor body
when using the
processor.
blender (B) by
twisting clockwise.
IMPORTANT: Remove protective blade
cover(s) before use. Protective blade
covers to only be used for storage.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Food Processing Center
120V., 60 Hz., 600 Watts
MAIN COMPONENTS AND ACCESSORIES
1. Processor Body
2. Safety Cover
3. Safety Cover/Blender
Location
4. On/Off Speed Control Dial
5. Pulse Button
6. Drive Shaft
7. Storage Compartment
8. Blender
24. Chopping Blade
Protective Cover
25. Plastic Dough Blade
26. Whisk Head
12. Spindle
13. Processor Lid
14. Food Pusher
15. Storage Dome
16. Spatula
27. Whisk Beater
28. Juice Extractor/Filter
29. Juice Extractor Lid
30. Juice Extractor Pusher
31. Citrus Juice Filter
32. Juice Reamer
17. Blade Holder
18. Fine Shredding Blade
19. Coarse Shredding Blade
20. Coarse Slicing Blade
21. Fine Slicing Blade
22. French Fry Blade
23. Chopping Blade
9. Blender Lid
10. Measuring Cap
11. Processor Bowl
2
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
The food processing center
3. Place the protective cover
(24) onto the chopping
is designed so that most of
the attachments can be
stored on-board.
blade (23) and place into
storage compartment. The
highest part of the blade
should be placed at the
back of the compartment.
Storage Compartment
1. Lift the lid of the storage
compartment (7).
2. Place whisk head (26) in
storage compartment as
shown.
4. Push shaft of whisk beater
(27) firmly into the hole.
5. Close the lid of the storage
compartment.
Storage Dome
1. Fit the processor bowl (11)
& processor lid (13) onto
the processor base.
2. Place the the storage
dome (15) onto the
processor lid.
Spatula Storage
Slide the spatula (16) into the
slot provided on the side of
the processor body (1).
3. Add the spindle (12) into
the circular hole in the
storage dome.
4. Place the plastic blade
holder (17) & French fry
blade(22) into the two
longer slots.
Cord Storage
The power supply cord can
be stored by feeding it into
the opening at the back of
the food processor body.
5. Add the slicing blades
(20, 21) & the shredding
blades (18, 19) into their
slots in the storage dome.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTRUCTIONS FOR USE
Operating Controls
The processor and blender
control dials have settings
as follows:
Off/1-9 + Max
Pulse
The speed can be adjusted
while the processor or
blender is in use.
5. Fit the spindle (12) onto the
motor shaft (6) and the
appropriate attachments
onto the spindle. Refer to
the following section
“Fitting & Using the Tools”.
WARNING
TO REDUCE THE RISK OF
INJURY, NEVER PLACE
THE CUTTING BLADE ON
THE BASE WITHOUT FIRST
PUTTING THE BOWL
PROPERLY IN PLACE.
Using the pulse button (5)
allows greater control over
the texture of the food
processed. It is only
intended to be used for
short “bursts” of processing
or blending.
6. Holding the processor lid
(13) by the feed tube, fit the
lid by rotating
counterclockwise.
Operating the Food Processor
7. Ensure that the lid tab has
“clicked” into place and the
arrows are lined up.
Setting up
1. CAUTION: Make sure
that the unit is unplugged
from power source and
operation button is on
“OFF” before inserting or
removing any
8. Plug the processor and
switch on. If the processor
does not come on, check
that the machine cover and
processor lid are both
correctly fitted.
attachments and before
cleaning.
FOR SAFETY, ALWAYS
USE THE FOOD PUSHER
WHEN PUTTING FOOD
INTO THE FEEDER TUBE.
NEVER FEED BY HAND.
2. Fit the safety cover (2)
into the food processor
body and turn
counterclockwise firmly
until it “clicks” into place
(the arrows will now be
lined up). IMPORTANT
THE FOOD PROCESSOR
WILL NOT OPERATE
WITHOUT THE SAFETY
COVER IN PLACE.
WARNING:
ALWAYS REMOVE THE
BLENDER AND FIT THE
SAFETY COVER (2) INTO
THE PROCESSOR BODY
WHEN USING THE
PROCESSOR.
3. Place the processor bowl
(11) onto the processor
body (1). There is no need
to turn the bowl.
4. When fitted correctly, the
handle will be to the right of
the assembly, and the ridge
on the base of the bowl will
fit into the slot at the back
of the processor body.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FITTING & USING THE TOOLS
In general, all attachments which are fitted within the processor bowl must be firmly
attached to the spindle (12). Always adjust the attachments until you are sure that they
are correctly fitted.
Chopping Blade (23)
1. Fit the processor bowl and spindle as detailed previously.
2. Remove the chopping blade protective cover (24) from the metal chopping blade.
3. Fit the blade over the spindle and press firmly into place.
WARNING:
USE EXTREME CAUTION - BLADES ARE SHARP. ALWAYS HANDLE THE CHOPPING
BLADE BY ITS CENTRAL PLASTIC HUB.
4. Place the food into the bowl.
5. Fit the lid and click into place as detailed in the “Setting Up” Section (page 4).
6. Insert power cord into electrical wall outlet.
• Keep hands and utensils away from cutting blades while chopping food to reduce the risk of
injury to persons or damage to the food chopper. A scraper may be used, but must be used
only when food processor is not running.
• Do not leave the appliance unsupervised when it is operating, i.e. when it is “ON”.
7. Never feed by hand. Always use the food pusher (14) to push food into the food processor
bowl (11) through the feeder tube.
8. WARNING: When the processing is completed, unplug, then remove the spindle (12) and
blade from the bowl before removing the processed food.
9. AFTER CLEANING, ALWAYS REPLACE THE PROTECTIVE COVER (24) ON THE
METAL CHOPPING BLADE (23).
Processing Examples With the Chopping Blade
The processing times indicated below are approximate and also depend on the quantity of the
food to be processed and the degree of fineness you require.
RECOMMENDED
PRODUCT
Meat*
QUANTITY
OPERATION TIMES
SPEED
Max.
5-6
24.5 oz / 700 gr.
24.5 oz / 700 gr.
21 oz / 600 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
24.5 oz / 700 gr.
4 slices
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
15 - 30 seconds
20 seconds
Onions
Nuts
8-Max.
1-8
Fish*
Cheese
Liquids (soups)
Carrots
Bread
1-8
1-8
6-8
40-50 seconds
40 - 50 seconds
10 - 30 seconds
10 seconds
6-8
Apples
24.5 oz / 700 gr.
Max 4 bundles
Max 4 cups/1 liter
8-Max.
Max.
8-Max.
Parsley
Mayonnaise
30 seconds
* Always allow food to cool before placing in the bowl.
* Remove all bones before processing.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Plastic Dough Blade (25)
CAUTION: Make sure that the unit is unplugged from the power
source and the operating button is “OFF” before inserting or
removing attachments.
1. Fit the processor bowl and spindle as described previously on page 4.
2. Fit the plastic dough blade over the spindle and press firmly into place.
3. Place the ingredients into the bowl.
4. Fit the lid and click into place as described in the “Setting Up” section
(page 4).
5. Plug in the processor.
6. Turn the processor on selecting maximum speed. Maximum capacity
for processing dough is based on the mixture of 21 oz. (600 g.) of
flour and 14 oz. (400 g.) of water in order to obtain 2.2 Lbs. (1 kg.) of
dough.
7. Remove the blade from the bowl before removing the dough.
WHEN KNEADING DOUGH, DO NOT OPERATE THE MACHINE
LONGER THAN 20 SECONDS. AFTERWARDS WAIT AT LEAST 2
MINUTES BEFORE OPERATING THE MACHINE AGAIN.
FOR SAFETY, ALWAYS LEAVE THE PUSHER IN PLACE WHILE
OPERATING THE PROCESSOR.
Whisk Head (26), Whisk Beater (27)
CAUTION: Make sure that the unit is unplugged from the power
source and the operating button is “OFF” before inserting or
removing attachments.
1. Fit the processor bowl and spindle as described previously on page 4.
2. Click the whisk beater (27) into the short extension of the whisk head
(26).
3. Place the long extension of the whisking head onto the motor shaft (6).
4. Add ingredients to the bowl.
5. Fit the lid and click into place as detailed in the “Setting Up” section
(page 4).
6. Plug the processor into the wall outlet.
7. Turn the processor on selecting maximum speed.
For your safety, the pusher must stay in its place while operating the
appliance. Keep hands, hair, clothing as well as spatulas and other
utensils away from beaters during operation to reduce the risk of injury
and/or damage to the appliance.
IMPORTANT WARNING: NEVER USE THE WHISK ATTACHMENT
FOR DOUGH KNEADING.
DO NOT IMMERSE THE WHISK HEAD (26) IN ANY LIQUID.
To clean the whisk beater (27), remove it from the whisk head (26)
and wash.
Wipe the whisk head (26) clean with a damp cloth.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Slicing & Shredding Blades
French Fry Blade (22)
1. Fit the processor bowl and spindle
as detailed previously.
CAUTION: Make sure that the unit is
unplugged from the power source and
the operating button is “OFF” before
inserting or removing attachments.
1. Place the blade of your choice on the
blade holder (17). Inserting the longer
tab on the side of the blade first.
2. Press the other end of the blade until it
clicks into place.
3. Fit the processor bowl and spindle as
detailed on the page 4.
4. Using the finger holes in the blade
holder, fit it over the spindle and press
firmly into place as indicated.
2. Using the finger holes in the
french fry blade, fit it over the
spindle and press firmly into place
as indicated.
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE
SHARP.
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
5. Fit the lid and click into place as
described in the Setting Up section
(page 4).
3. Fit the lid and click into place as
indicated in Setting Up section
(page 4).
4. Plug in the processor.
5. WARNING: USE THE FOOD
PUSHER (14) TO ADD FOOD
INTO THE PROCESSOR BOWL
(11) THROUGH THE FEEDER
TUBE.
6. Plug in the processor.
7. WARNING: USE THE FOOD
PUSHER (14) TO ADD FOOD INTO
THE PROCESSOR BOWL (11)
THROUGH THE FEEDER TUBE.
Do not overload the bowl. In one
operation, you can process
maximum 2.2 Lbs. of food.
Processing Examples
For fine slicing: Blade A (21)
Recommended speed level is between 5-6
(Cucumbers, raw potatoes, lettuce, carrots)
For coarse shredding: Blade D (19)
Recommended speed level is between 5-6
(Lettuce, carrots, apples)
For coarse slicing: Blade B (20)
Recommended speed level is between 5-6
(Cabbage, carrots, onions)
For French Fries: Disc (22)
Recommended speed level is between 5-6
For fine shredding: Blade C (18)
Recommended speed level is between 5-6
(Carrots, cucumbers, cabbage)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Juice Extractor
CAUTION: Make sure that the unit is unplugged from the power
source and the operating button is “OFF” before inserting or
removing attachments.
1. Fit the processor bowl as detailed previously (page 4).
2. Fit the juice extractor/filter (28) into the processor bowl.
3. Fit the juice extractor lid (29) over the extractor and rotate
counter clockwise ensuring that the lid tab has clicked into place.
4. Plug in processor.
5. Turn speed control to low (use only on low speed).
6. Use the juice extractor pusher (30) to add fruit into the food tube.
7. If the juice extractor becomes clogged during use, turn the
processor off and remove the juice extractor. The excess pulp
can now easily be removed using the spatula.
Be sure to switch the appliance to “OFF” position after each use.
Make sure the motor stops completely and unplug the unit before
disassembling.
FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING
FRUIT INTO THE FEEDER TUBE - NEVER FEED BY HAND.
Do not put your fingers or other objects into the juicer opening
while it is operation. If food becomes lodged in the opening, use
food pusher or another piece of fruit or vegetable to push it down.
When this method of removing food lodged in the opening is not
possible, turn the motor off, unplug unit and disassemble juicer to
remove the remaining food.
Citrus Juice Filter (31)
WARNING: ALWAYS OPERATE THE JUICER AT LOWEST SPEED
ONLY. DO NOT OPERATE THE CITRUS JUICER AT HIGHER
SPEEDS.
CAUTION: Make sure that the unit is unplugged from the power source and the operating
button is “OFF” before inserting or removing attachments.
4. Insert the juice reamer into the center
of the citrus juice filter (31) with its shaft
inside the central column of the bowl.
1. Fit the processor bowl
as detailed previously
(page 4).
2. Fit the citrus juice filter
(31) into the processor
bowl.
3. Rotate counter
clockwise. Ensure that
the citrus juice filter tab
has clicked into place.
5. Plug in processor.
6. Place fruit on juice reamer and hold with
a cupped hand.
7. Operate at lowest speed.
WARNING: ALWAYS OPERATE THE
JUICER AT LOWEST SPEED ONLY.
DO NOT OPERATE THE CITRUS
JUICER AT HIGHER SPEEDS.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Blender (8)
CAUTION: Make sure that the
unit is unplugged from the
power source and the operating
button is “OFF” before inserting
or removing attachments and
before cleaning.
TO REMOVE THE
BLENDER, YOU
MUST FIRST
UNLOCK AND
REMOVE THE
PROCESSOR LID (A).
THEN UNLOCK ANS
RMOVE THE
1. Remove the processor bowl
and lid.
2. Remove the safety cover (2).
This can only be done once the
processor lid has been
removed.
3. Place the blender (8) into its
location on the processor body
with the handle to the left.
Turn counter clockwise until
the blender clicks into place
and the arrows are aligned.
Warning: Use extreme caution -
blades are sharp. Handle
carefully.
BLENDER (B) BY
TWISTING
CLOCKWISE.
WARNING
4. Place food in blender.
5. Place the blender lid (9) and
the measuring cap (10) on the
blender.
6. Replace the processor bowl
and processor lid. Ensure that
the lid tab has clicked into
place. The blender will not
operate if the processor lid is
not clicked in place.
ALWAYS REMOVE
THE BLENDER AND
FIT THE SAFETY
COVER (2) INTO THE
RPOCESSOR BODY
(1) WHEN USING THE
PROCESSOR.
7. Plug in the processor.
8. Always operate the blender
with the lid in place.
CAUTION: Never operate the blender with more than 42 oz. (1250 ml) of liquid or when empty.
• Recommended speed levels for blending are between 5 - Max.
• Do not overload past the MAX level on the blender.
• You can crush 10 oz. of ice cubes in 15-20 seconds in the blender.
• To prevent spilling, do not operate the blender with more than 42 oz. (1250 ml) of liquid.
• Avoid contact with moving parts at all times.
• Do not blend boiling liquid.
• To reduce the risk of severe injury to people or damage to the blender, keep hands, hair,
clothing as well as spatulas and other utensils out of container while blending.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND MAINTENANCE
CAUTION: Make sure that the unit is unplugged from power source and control
button is on “OFF” before inserting or removing any attachments and
before cleaning.
• Never immerse the unit, cord or plug in water or any other liquid.
• Clean the motor block with a damp cloth only.
• Only the stainless steel blades can be washed in the dishwasher.
• All other parts can be cleaned in warm sudsy water using regular dishwashing liquid.
• Cleaning the blender jar (flask):
*Fill with sudsy warm water.
*Place lid on jar.
*Run blender at maximum speed for 30 seconds. Rinse and repeat if necessary.
Hints & Tips
• The metal blade (23) can be used for chopping meat, fish, vegetables, cheese, etc. setting
the speed to maximum.
• For finer chopping, increase the length of time you process.
• For coarser chopping, use the pulse button for a few seconds and monitor food texture.
• Pre-cut larger pieces to make them fit into the feed tube. When chopping hard foods (e.g.
meat, cheese) cut into 1 “/2.4 cm cubes.
• For shredding, place food horizontally into the feed tube, for slicing place the food
vertically.
• When blending, pour the liquids in first and then add the solid food. Begin blending at the
lower speed and increase when needed.
RE-SETTABLE THERMAL SAFETY DEVICE
Your Euro-Pro Food Processing Center has been designed with a unique safety system which
prevents damage to the unit’s motor and drive system, should you inadvertently overload your
appliance. The safety system will automatically cut the electric power to the appliance when the
device senses an overload or excessive temperature in the motor or drive system. Should this
occur during use and the appliance stops functioning, follow the re-setting procedure below:
1. Turn the “ON/OFF” speed control (4) to the “OFF” position
2. Unplug the unit from the wall receptacle.
3. Remove and empty either the blender flask or processor bowl (whichever is being used).
Ensure that no food is jamming the cutting blades or attachments.
4. Allow the appliance to cool down for a minimum of 30 minutes.
5. Re-install the processor bowl or blender flask and re-plug appliance in the wall outlet.
6. Proceed to use the appliance as before. Should the appliance still fail to operate, turn the
“ON/OFF” speed control (4) to the “OFF” position and unplug from the wall outlet. Allow
the appliance to cool down for an additional 1 to 2 hours. After this time has passed,
repeat the restart procedure, steps 5 and 6 above.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO OPERATING LLC warrants this product to be free from defects in material and workmanship
for a period of one (1) year from the date of purchase when utilized for normal household use.
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, return the complete appliance and accessories, freight prepaid. For customer service
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair
or replace it free of charge. Proof of purchase date and $14.95 to cover the cost of return shipping and
handling must be included.*
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the
unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has
been tampered with or used for commercial purposes. This limited warranty does not cover damage caused
by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific
obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO
Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some states do
not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to
you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase
date and to attach tag to item before packing with your name, complete address and phone number
with a note giving purchase information, model number and what you believe is the problem with
item. We recommend you insure the package (as damage in shipping is not covered by your
warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.
OWNERSHIP REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please complete and return within ten (10) days of purchase. The registration will enable us to contact you
in the event a product defect is discovered. By returning this card you acknowledge to have read and
understood the instructions for use, and warnings set forth in the accompanying instructions.
RETURN TO: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, QC H4S 1A7
PURCHASER: ………………………………………………………………………………………………………………………
ADDRESS: ………………………………………………………………………………………………..…………………………
EKP110
DATE OF PURCHASE: …………………….. MODEL: ………………. SERIAL NO: .……………..…………………………
NAME AND ADDRESS OF STORE: …………………………………………………………………..…………………………
Printed in Turkey
Download from Www.Somanuals.com. All Manuals Search And Download.
|