Model SC505
1 YEAR LIMITED WARRANTY
Your Steam Cleaner is warranted to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when utilized
for normal household use by the original purchaser only. The included Warranty
Registration Card must be filled out and returned within 10 days of purchase.
This is essential for your Warranty to be effective should any problem arise with
this product.
Should any defect covered by the terms of the limited warranty be discovered
within one year, EURO-PRO Operating LLC will repair or replace any defective
part provided the unit is returned by the original purchaser, freight prepaid, to:
OWNER’S MANUAL
Model SC505
120V., 60Hz., 1550 Watts
US: EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, NY 12901
Proof of purchase date and $12.95 for handling and return packing/shipping
charges must be included.*
The liability of under this warranty is limited solely to the cost of the replacement
parts or the complete unit at our option. LABOUR CHARGES ARE NOT
INCLUDED.
This warranty does not cover normal wear of parts and does not apply to any unit
that has been tampered with or used for commercial purposes. This Limited
Warranty does not cover damage caused by misuse, negligent handling, or
damage due to faulty packaging or mishandling in transit (by any common
carrier).
This warranty is extended to the original purchaser of the unit and excludes all
other legal and/or conventional warranties. The responsibility of EURO-PRO
Operating LLC, if any, is limited to the specific obligations expressly assumed by
it under the terms of the limited warranty. In no event is EURO-PRO Operating
LLC liable for incidental or consequential damages of any nature whatsoever.
Some States/Provinces do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights which vary from state to state or
province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to attach
tag to item before packing with your name, complete address and phone number
with note giving purchase information, model number and what you believe is the
problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to
change without notice.
For information or assistance:
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel: 1 (800) 798-7398
Printed in Turkey
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS cont.
ADDITIONAL IMPORTANT SAFEGUARDS cont.
Tips On How To Use Your Steam
Cleaner
Water
Window, Glass Surfaces and Mirrors
1. To avoid circuit overload, do not operate another appliance on the same socket
(circuit)
Use the window squeegee. Work with the
steam on using top to bottom movements.
Use the squeegee with the steam to clear
the water from the glass. To do this without
leaving streaks, use lateral movements
from the top to the bottom of the surface.
2. If an extension cord is absolutely necessary, a 15 ampere 14 gage cord should
be used. Cords rated for less amperage may overheat. Care should be taken to
arrange cord so that it cannot be pulled or tripped over.
3. Do not leave unattended when the system is connected to a power
supply/electrical outlet.
•
Use tap water for all your cleaning
needs.
•
However, if you live in an area with
hard water, use demineralized/
distilled water when steaming light
colored fabrics to eliminate the
possibility of hard water stains.
Fiberglass or Stainless Steel Surfaces
Use the nylon detail brush. Slowly move
the brush over the surface to be cleaned.
The steam will emulsify the dirt and
grease on the surface. Follow behind
with a 100% cotton towel to remove
excess moisture and residue.
Tip: An old idea for polishing stainless
steel is to wipe it down with seltzer soda
water after it is cleaned.
SAVE THESE INSTRUCTIONS
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes,
oils or any other chemicals to
the water used in this
appliance. Use tap water or
distilled/purified water if the tap
water in your area is very hard.
FOR HOUSEHOLD USE ONLY
WARNING: This appliance is equipped with a grounded-
type 3-wire cord (3-prong plug). This plug
will only fit into an electrical outlet made for
a 3-prong plug. This is a safety feature. If
the plug should fail to fit the outlet, contact
an electrician to replace the outlet. Do
Efficient Work
•
•
•
For vertical surfaces, wipe
always from the top down, in
this way the dirty water will not
soil surfaces already cleaned.
Avoid changing brushes back
and forth while cleaning. Start
with the smallest brush to clean
tight spots and corners first.
Wipe dirt as soon as possible,
otherwise it will dry and re-
adhere to the surface.
Soap Scum
Soap scum dissolves almost immediately
under a combination of heat and
moisture. Rinse the surface with a small
amount of water afterwards.
Note: Soap scum sometimes will develop
a hard surface from waterborne minerals.
If this is the case, use the detail brush to
break up this surface - or spray or wipe
first with lemon, vinegar or seltzer soda
water to soften the minerals.
not attempt to defeat the safety purpose of
the grounding pin, part of the 3-prong plug.
Moving too slowly can dry out the soap
scum and cause it to granulate on the
surface. The surface will have a gritty
feel. If this happens, apply vapor to the
surface with the nylon detail brush again
and re-clean.
Hints
The Portable Shark Steam Cleaner
has many uses many of which will not
be mentioned in this owner's manual.
This is meant only to give you a
general idea of what can be achieved
with the unit. However, the ways in
which to use the units and the
brushes are in most cases universal.
It is most helpful to always have a
micro fiber cloth or a terry cloth
towel or paper towel ready to use
for removal of moisture and
residue. 100% white cotton towels
work best.
You can clean the brushes with your
steam cleaner. When cleaning the
detail brush, use a pair of pliers to
hold the brush or place in the basket
of your dishwasher.
Note: Wipe immediately before the
cleaned area dries. When cleaning
the oven, use the detail brush to clean
around the elements, drip trays,
cracks, crevices, and hard to reach
areas.
Bathroom Areas
To clean the bathtub or shower area, use
the detail brush for grout, shower door
tracks, hard to get areas and heavily
soiled areas. The window squeegee will
be the most efficient way to clean the rest
of the area. Allow plenty of time for the
heat to penetrate the surface. This is
especially helpful in the shower area if
there is tile or grout.
To clean sanitary fixtures, use angle
concentrator/brush adapter with or
without the nylon detail brush.
To clean the sink and faucets, use nylon
detail brush.
9
2
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING TO KNOW YOUR PORTABLE SHARK STEAM
CLEANER
OPERATING INSTRUCTIONS cont.
Care & Maintenance
Attaching the Shoulder Strap
CAUTION: This appliance must
Using the detachable shoulder strap
allows for greater freedom of movement
when both hands are needed for various
cleaning tasks. To attach the shoulder
strap to the steam cleaner, simply snap
the shoulder strap hooks onto the
connecting rings on the unit body. When
using the steam cleaner with the shoulder
strap, avoid rocking or tilting the unit
excessively as this may cause water to
enter the hose and be discharged along
with the steam.
be unplugged from the electrical
outlet and allowed to cool down
before performing any cleaning or
maintenance tasks on the unit.
•
•
Let the appliance cool down
completely before cleaning or storing.
Depress the trigger before opening
the safety cap in order to release any
residual pressure in the boiler.
Empty all water from the water tank
after each use.
•
•
•
Store in a dry, cool place.
Connecting Points
A periodic rinse of your steam cleaner
will free it from deposits. This is
recommended every 10-15 tankfulls
to free up any scale deposits. Fill the
boiler with water and shake
vigorously. Tilt the cleaner upside
down to empty the boiler of water and
any scale deposits.
Cleaning the Angle Concentrator:
Your steamer should not normally require
cleaning, however, should you notice a
marked decrease in steam output it may be
necessary to remove mineral deposit build-
up from the angle concentrator orifice.
First ensure that there is water in the tank.
If tank is empty, fill with water, (we
1. Safety Cap
11. Trigger Lock
recommend using purified or demineralized
water), then re-start unit noting whether
steam output is normal. If steam output is
still low, follow these cleaning instructions:
1. Unplug steam cleaner from wall outlet.
2. Use a small diameter stiff metal wire
such as a straightened metal paperclip
and carefully insert the end of the wire
into the angle concentrator orifice.
2. Shoulder Strap Hook
3. Shoulder Strap Loop
4. Main Unit
12. Nylon Detail Brush (x2)
13. Angle Concentrator/Brush Adapter
14. Extension Tubes (x2)
15. Window Squeegee
16. Floor Brush
17. Filling Flask
18. Shoulder Strap
19. Angle Adapter (Floor Brush)
5. Handle
6. Power Cord
7. Indicator Light
8. Flexible Hose
9. Hand Grip
3. Move wire back and forth several
times to remove any deposits.
10. Steam Trigger
4. Reconnect appliance to power outlet,
switch on and note steam output.
Technical Specifications
5. If steam performance does not
improve, repeat steps #1 through #4.
Voltage:
120V., 60Hz.
Power:
1550 Watts
Water Capacity:
28 U.S. Fl. Oz.(800ml)
Note: Illustrations may differ from actual unit.
Paper clip
3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS cont.
Attaching a Towel to the
Floor Brush
100% white terry cloth towel can be fitted
on this brush, so as to absorb the dirt and
protect delicate surfaces.
FEATURES
Your Hand Held Steam Cleaner utilizes pressurized steam to remove tough grease,dirt
and grime. Steam is nature’s purest and most powerful cleaner for safely cleaning all
hard surfaces in your home without harsh chemicals, thus being perfectly ecological.
The appliance has various attachments so that it can be used for many purposes such
as:
1. Clean upholstery, sealed grout, bathroom/kitchen tile, stovetops.
2. Easy to clean difficult to reach areas with the angle concentrator/brush adapter such
as faucets, etc.
3. Ideal for windows, mirrors, glass doors, etc.
4. Clean fabrics, window coverings, pillows, bedding etc.
5. Clean hard surface areas such as counters, sinks, shower door tracks, etc.
Important: Please note that bristles may
break through thin towels. We recommend
that two (2) towels, laid one on top of the
other be used. This will ensure that the
brush bristles do not break through and
that the towels will be sufficiently absorbent
and retain as much dirt as possible.
Fig. D
5. Place the corner under the cloth
holder as shown in Fig. D.
WARNING: Your Hand Held Steam Cleaner is designed to clean hard
surfaces and upholstery that will withstand high heat. Do not use on soft
plastics, unsealed wood and cold glass. On surfaces that have been
treated with wax or some no wax floors, the sheen may be removed by
the heat and steam action. Do not use on unsealed wood. This could
cause the wood grain to rise. It is therefore recommended to test an
isolated area of the surface to be cleaned before proceeding.
Very Important: When installing the
towels to the floor brush, ensure that the
towels do not cover the front and the back
of the brush. (See Fig. E)
CAUTION: Do not plug in the machine during filling. Use a grounded
receptacle. Use only a heavy duty extension cord rated for 15 amps - Do
not use an ordinary extension cord.
Fig. E
6. Place the towel around the brush,
and repeat folding the towel as shown
in Fig. E. When folding the towel,
leave some slack. Do not pull tightly
around the brush, leave some
looseness.
IMPORTANT: Do NOT add cleaning solutions, scented perfumes, oils or
any other chemicals to the water used in this appliance.
Use regular water or distilled/purified water if the tap
water in your area is very hard.
Fig. A
1. Prepare white terry cloth towel:
size 8” x 17” as shown in Fig. A.
2. Place the brush on top of the towel.
NOTE: There may be a slight release of pressure when accessories are removed.
This is normal due to pressure build up inside of accessories during use.
To refill, unplug, unit from electrical outlet, depress trigger until all remaining
pressure/steam has been allowed to escape from the tank, and allow to cool for 5
minutes. Carefully open the safety cap. Once cool, refill, replace safety cap and re-plug
into electrical outlet. Resume work.
Fig. B
3. Fold the towel as shown in Fig. B
Fig. C
4. Fold the other side of the towel as
shown in Fig. C.
4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS cont.
ATTACHMENTS
Angle Concentrator/Brush Adapter
Using the Locking Trigger Button
Using the Steam Cleaner with
Floor Brush
How To Assemble & Use
The steam cleaner has a locking trigger
button. The trigger will lock when you
have pushed it in all the way. To unlock
the steam trigger, just press the locking
trigger button in and the steam trigger
will pop up, stopping the flow of steam.
IMPORTANT: Always insure that the
unit is “UNPLUGGED” from the wall
receptacle prior to initial filling or re-filling
the water tank. Never attempt to fill this
unit under a water tap, always use the
filling flask provided. Failure to follow
these steps will cause the water tank to
overfill and may pose an electrical safety
hazard.
Step 1: Before filling the steam cleaner,
make sure that the unit is NOT
plugged in.
Step 2: Press locking trigger to ensure
all internal pressure is released.
Step 3: Turn Safety Cap counter
clockwise until removed.
To attach the angle concentrator/brush
adapter to the hose, hold the hold grip in
one hand and insert the angle
concentrator/brush adapter into the nozzle
end of the hand grip. Make sure that it
locks in place. (See below.)
Step 1: Connect one of the extension
tubes to the hand grip on the
flexible steam hose. To
attach the extension tubes
one onto the other or
onto the hand grip, press the
locking button ensuring that it
fits into the hole. (See
illustrations.) To disconnect,
repeat the operation by
pressing the locking button
and pulling the two sections
apart.
Refilling With Water
Step 1: Disconnect electrical power
cord from wall outlet.
Step 2: Press trigger button until all
pressure has been released.
Step 3: Allow the unit to cool for
approximately 5 minutes
Using Accessories
before refilling with water.
To use the nylon detail brushes, attach the
nylon bristle brush to the end of the angle
concentrator/brush adapter. (See below.)
Carefully unscrew safety cap.
Step 4: Slowly pour water using the
filling flask into the boiler.DO
NOT Fill Under a faucet, use
the filling flask provided. DO
NOT OVERFILL. Always
Step 4: Release locking trigger.
Step 5: Add 28 fl. oz (800 cc) of water
using the filling flask provided.
Do not overfill. Replace
Safety Cap by turning
clockwise - press down firmly to
tighten. Heating time is
approximately 6 minutes. Filling
the boiler with hot water will
shorten heat up time.
leave approximately 2 1/2
inches between the top of
the unit and the water level.
Step 5: Release the locking trigger.
Step 6: Screw safety cap back on the
appliance and plug appliance
back into wall outlet. Steam will
start to be produced as before.
Step 6: Plug the unit into a standard
120 volt grounded wall
receptacle. The power “On”
light (Red) will light up.
Step 7: Allow approximately 6 minutes
for water vapor to reach its
Window Squeegee
CAUTION: When cleaning
windows, always avoid any sudden
changes in temperature to prevent
glass breakage or cracks.
Extension Tubes
working temperature and
pressure. When unit is ready
for use the red light will change
to Green.
Please note that the window squeegee can
only be used with the
hose. To attach the
window squeegee to
the hose, push it in until
the squeegee locking
button clicks in place on
the hose.
Apply steam abundantly,
rub with the soft spongy end, then remove
excess water and dirt with the glass wiping
edge.
This attachment is very useful for cleaning
large windows, plastic material, ceramic,
tiled or marble surfaces.
NOTE: Fit floor brush with
the floor brush
angle adapter
Step 8: At the start, some water will
come out from the nozzle. This
is normal.
on to the
extension tube.
Floor Brush
Angle Adapter
NOTE: Disconnect steam cleaner from
wall outlet before refilling. It is time to refill
your steam cleaner when there is no more
steam coming out of the nozzle. Because
the water tank is pressurized, use caution
when opening to refill. Depress the trigger
button while you unscrew the safety cap
counterclockwise. Always let unit cool for
5 minutes before refilling the unit with
water.
Step 2: If the floor brush angle adapter
is not attached to the floor
WARNING: This appliance is
under pressure. After every use,
press trigger button until all
pressure has been released
before removing safety cap.
Allow unit to cool for five (5)
minutes before refilling.
brush, hold the brush with its
bristles up in your left hand.
With the floor brush angle
adapter pointing downward,
insert it into the hole in the back
of the brush, then turn the floor
brush angle adapter 180°.
Step 3: Insert the electrical power cord
into the wall outlet. Heating
time is approximately 6 minutes
with cold water. Filling the
CAUTION: When refilling the
appliance while it is still hot, the
first drops of water might
bubble up.
steam generator with hot water
will shorten heat up time.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|