EVH-1152S/43
Single 15” Two-Way Coaxial
40° x 30° Full-Range
High Efficiency
Loudspeaker System
Key Features:
•
•
•
•
ND2B 2” (51mm) Diaphragm, 1.4” (36mm) Exit
Pure Titanium Compression Driver
SMX2151 15” (381mm) LF Transducer with Fully
Symmetric Drive
Advanced 4th Order Crossover Network with HF
Protection
Coverage Pattern: 40° x 30° Constant
DirectivityTM Rotatable Waveguides
•
•
•
106 dB Sensitivity, 139 dB Maximum SPL
System Rating: 500W Continuous, (2000W Peak)
Active Rating: LF400W/HF40W Continuous
(1600W/160W Peak)
•
•
(28) M10 Threaded Suspension Points
PI Version Available with Gland Nut and Stain-
less Steel Grille
Technical Specifications:
General Description:
Freq. Response1 (-3 dB): 60 Hz - 15 kHz
Freq. Range1 (-10 dB): 50 Hz - 16 kHz
Rec. Hipass Frequency: 60 Hz
The Electro-Voice® EVH-1152S/43 is a high power, 2-way Horn loaded
coaxial loudspeaker system that can be used in a variety of applications
where excellent quality sound reinforcement , wide bandwidth directivity
control , and high efficiency are required in a compact package.
Axial Sensitivity: 106 dB (1W/1m)
Max. Calculated SPL: 139 dB
The EVH-1152S/43 utilizes an ND2B and an SMX2151. The ND2B is a high
output 2” titanium compression driver, coupled to a rotatable 12” x 12”
Constant Directivity™ 40° x 30° waveguide. The new SMX2151 is a high
output, low distortion 15” woofer. Developed by EV engineering the mo-
tor, suspension, and electrical characteristics of the woofer are optimized
to maximize efficiency and minimize distortion. The passive crossover
network employs 24 dB/octave slopes for a smooth response in the vocal
range, linear off-axis response, and features a comprehensive protection
circuit for long term reliability. This combination of technologies results in
a smooth response to 16 kHz and excellent pattern control down to 500Hz.
Horizontal Coverage: 40° (or 30°)
Vertical Coverage: 30° (or 40°)
Power Handling: 500W Continuous, 2000W Peak
LF Transducer: SMX2151, 15 in (381mm) Driver
HF Transducer: ND2B, 2 in (51mm) Diaphragm
Compression Driver
Crossover Frequency: 1300 Hz
Nominal Impedance: 8 Ohms
Minimum Impedance: 6.0 Ohms
The EVH-1152S/43 features make it ideal for any fixed install applica-
tion. The trapezoidal enclosure is constructed out of 13 ply, 18mm birch,
and coated with EVCoatTM for maximum protection from the elements. PI
weather resistant models uses a stainless steel grill grille backed with
multiple material layers to prevent weather or humidity ingress. The EVH
family of models employ an intelligent combination of superior acoustic
design and rigging which allow for vertical and horizontal clusters to be
built using any combination of loudspeakers from the entire EVF & EVH
Series. 28 suspension points for use with rated eyebolts or EV –I cluster
hardware provide low cost, simple rigging solutions. With 6 horn pat-
terns to choose from and an assortment of low frequency and subwoofer
loudspeakers, EVH provides you the tools to easily design a custom
tailored solution, no matter what the application or budget. The innova-
tive input panel can be customized to one of three input choices, including
a phoenix style connector (included in all standard models), dual NL4
type connectors (sold separately), or a gland nut cover plate (for weather-
izing applications). An externally accessible jumper selects passive or
active operation. An available 70.7/100 Volt transformer kit can be easily
installed for use in distributed systems.
Connectors: (2) 4 Contact 10
PI Version -
AWG (2.6mm) Phoe- Gland Nut with
nix/EuroBlock Style Included Input
Screw Terminals
Panel Cover
Enclosure Material: 13 Ply Weather Resistant Birch
Grille: 16 GA Galvanneal,
Powdercoat, with
PI Version -
Stainless Steel
with Hydropho-
bic Cloth
Rotatable Logo
Environmental Specs: Std. Version - IP33
PI/FG - IP55
Suspension: (28) M10 Threaded Points
Dimensions (H x W x D): 30.26” x 30.26” x 26.77”
(768.6mm x 768.6mm x 680.1mm)
Net Weight: 143 lbs (64.9 kg)
Shipping Weight: 158 lbs (71.8 kg)
1 Half Space Measurement.
Download from Www.Somanuals.com. All Manuals Search And Download.
Engineering Data Sheet
Polar Plots (1/3 Octave):
400 Hz
500 Hz
1.25 KHz
3.15 KHz
8 KHz
630 Hz
1.6 KHz
4 KHz
800 Hz
1 KHz
2.5 KHz
6.3 KHz
16 KHz
2 KHz
5 KHz
10 KHz
12.5 KHz
20 KHz
Horizontal = Black
Vertical = Grey
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimension Drawings:
End View
Front View
Side View
Rear View
EVH-1152S/43 Part Numbers
• PRD000265-001 EVH-1152S/43-BLK, 40° x 30°, Black Finish
• PRD000265-002 EVH-1152S/43-WHT, 40° x 30°, White Finish
• PRD000265-003 EVH-1152S/43-PIB, 40° x 30°, Black Finish,
Weather Resistant
• PRD000265-004 EVH-1152S/43-PIW, 40° x 30°, White Finish,
Weather Resistant
• PRD000265-005 EVH-1152S/43-FGB, 40° x 30°, Black Finish,
Weather Resistant Fiberglass
• PRD000265-006 EVH-1152S/43-FGW, 40° x 30°, White Finish,
Weather Resistant Fiberglass
CAUTION
This EVH Loudspeaker should be suspended overhead
only in accordance with the procedures and limitations
specified in the EVF/EVH Users Manual and possible
manual update notices. This system should be suspended
with certified rigging hardware by an authorized rigging
professional and in compliance with local, state, and fed-
eral overhead suspension ordinances.
Performance Match
Accessories
• PRD000211
• PRD000212
• PRD000213
• PRD000214
• PRD000215
• PRD000216
• PRD000217
• PRD000218
• F.01U.076.843
• F.01U.076.844
• D170469
EVF-1121S, 12” Bass Element
• ACC000084-000 CDNL4, Cover Plate, Dual NL4
EVF-1151S, 15” Bass Element
EVF-1181S, 18” Bass Element
• ACC000085-000 CSG, Cover Plate, Single Gland Nut
• ACC000086-000 CDG, Cover Plate, Dual Gland Nut
• ACC000087-000 TK-150, 70V Transformer, 150W
• ACC000089-001 HRK-1B, Horiz. Rigging Kit, EVF, Black
• ACC000089-002 HRK-1W, Horiz. Rigging Kit, EVF, White
• ACC000090-001 HRK-2B, Horiz. Rigging Kit, EVF-SUB, Black
• ACC000090-002 HRK-2W, Horiz. Rigging Kit, EVF-SUB, White
• ACC000091-001 HRK-3B, Horiz. Rigging Kit, EVH, Black
• ACC000091-002 HRK-3W, Horiz. Rigging Kit, EVH, White
• ACC000092-001 VRK-1B, Vert. Rigging Kit, EVF, Black
• ACC000092-002 VRK-1W, Vert. Rigging Kit, EVF, White
• ACC000093-001 VRK-2B, Vert. Rigging Kit, EVF-SUB, Black
• ACC000093-002 VRK-2W, Vert. Rigging Kit, EVF-SUB, White
• ACC000094-001 VRK-3B, Vert. Rigging Kit, EVH, Black
• ACC000094-002 VRK-3W, Vert. Rigging Kit, EVH, White
EVH-1152S/64, Coaxial 60° x 40° Coverage
EVH-1152S/66, Coaxial 60° x 60° Coverage
EVH-1152S/94, Coaxial 90° x 40° Coverage
EVH-1152S/96, Coaxial 90° x 60° Coverage
EVH-1152S/99, Coaxial 90° x 90° Coverage
CPS2.9, 120V Power Amplifier, 2 x 900W
CPS2.12, 120V Power Amplifier, 2 x 1200W
CPS4.5, 120V Power Amplifier, 4 x 500W
CPS4.10, 120V Power Amplifier, 4 x 1000W
• D170466
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Electro-Voice®
12000 Portland Avenue South, Burnsville, MN 55337
Phone: 952/884-4051, Fax: 952/884-0043
Other Internatonal locations. For customer orders, Contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 887-9212
For warranty repair or service information, contact the Service Repair department at:
800/685-2606
© Bosch Communications Systems
01/2010
For technical assistance, contact Technical Support at: 866/78AUDIO
Part Number LIT000281005 Rev A
Specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|