Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
PRECAUTIONS .............................................................................. 4
1. INTRODUCTION ............................................................................ 9
1-1. Features ....................................................................................................... 9
1-2. Package Contents ........................................................................................ 9
1-3. Controls & Connectors ................................................................................ 10
2. CABLE CONNECTION................................................................ 11
2-1. Before connecting ....................................................................................... 11
2-2. Connecting the signal cable ........................................................................ 12
3. ScreenManager ........................................................................... 14
3-1. How to use the ScreenManager .................................................................. 14
3-2. ScreenManager Adjustments and Settings ............................................... 15
3-3. Useful Functions......................................................................................... 16
4. ADJUSTMENT ............................................................................ 18
4-1. Screen Adjustment ..................................................................................... 18
4-2. Displaying the low resolutions ..................................................................... 22
4-3. Color adjustment......................................................................................... 24
4-4. Power-save Setup....................................................................................... 26
5. ATTACHING AN ARM STAND .................................................... 27
6. TROUBLE SHOOTING ................................................................ 29
7. CLEANING................................................................................... 32
8. SPECIFICATIONS ....................................................................... 33
9. GLOSSARY.................................................................................. 35
10. INDEX .......................................................................................... 37
APPENDIX............................................................................................. i
TABLE OF CONTENTS
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
IMPORTANT!
´ This product has been adjusted specifically for use in the region to which it was
originally shipped. If operated outside the region to which it was originally shipped,
the product may not perform as stated in the specifications.
´ To ensure personal safety and proper maintenance. Please read this section and the
caution statements on the unit (refer to the figure below).
[Location of the Caution Statements]
CAUTION:Risk of electric shock. Do not open.
ATTENTION:Risque de choc electrique. Ne pas ouvrir.
ACHTUNG:Gefahr des elektrischen schlages. Rückwand nicht entfernen.
The equipment must be connected to a grounded main outlet.
Jordet stikkontakt skal benyttes når apparatet tilkobles
datanett.
Apparaten skall anslutas till jordat nätuttag.
WARNING
´ If the unit begins to emit smoke, smells like something is burning, or
makes strange noises, disconnect all power connections immediately and
contact your dealer for advice.
Attempting to use a malfunctioning unit can be dangerous.
´ Do not dismantle the cabinet or modify the unit.
Dismantling the cabinet or modifying the unit may result in electric shock or
burn.
´ Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards.
4
PRECAUTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
• Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet
or spillage into the cabinet may result in fire, electric shock, or equipment
damage. If an object or liquid falls/spills into the cabinet, unplug the unit
immediately. Have the unit checked by a qualified service engineer before
using it again.
´ Place the unit on a strong, stable surface.
A unit placed on an inadequate surface may fall, resulting in injury or equipment
damage. If the unit falls, disconnect the power immediately and have the unit
checked by a qualified service engineer before using it again. Using a unit after
it has been dropped may result in fire or electric shock.
OK
´ Set the unit in an appropriate location.
Not doing so may cause damage and could result in fire or electric shock.
* Do not place in outdoors.
* Do not place in the transportation system (ship, aircraft, trains, automobiles,
etc.)
* Do not install in a dusty or humid environment.
* Do not place in a location where steam can have direct contact with the
screen.
* Do not place near heat generating devices or a humidifier.
• To avoid danger of suffocation, keep the plastic packing bags away
from babies and children.
• Use the enclosed power cord and connect to the standard power outlet of
your country. Be sure to remain within the rated voltage of the power
cord.
Not doing so may cause in fire or electric shock.
´ To disconnect the power cord, grasp the plug firmly and pull.
OK
Never tug on the cord, doing so may cause damage and could result in fire or
electric shock.
´ The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Download from Www.Somanuals.com. All Manuals Search And DownloadP. RECAUTIONS
5
WARNING
´ Use the correct voltage.
* The unit is designed for use with a specific voltage only. Connection to
another voltage than specified in this User’s Manual may cause fire, electric
shock, or other damage.
* Do not overload your power circuit, as this may result in fire or electric
shock.
* For proper connections of the power cord, be certain to plug the power cord
to the provided unit connector and directly to a wall outlet. Not doing so may
result in fire or electric shock.
´ Handle the power cord with care.
* Do not place the cord underneath the unit or other heavy objects.
* Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord
may result in fire or electric shock.
´ Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
´ When attaching an arm stand, please refer to the user’s manual of the arm
stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to come unattached, which may result in
injury or equipment damage. When the unit is dropped, please ask your dealer
for advice. Do not continue using a damaged unit. Using a damaged unit may
result in fire or electric shock.When reattaching the tilt stand, please use the
same screws and tighten them securely.
´ Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes
or mouth. If any part of the skin or body comes in direct contact with the
panel, please wash thoroughly. If some physical symptoms result, please
consult your doctor.
´ Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
6
PRECAUTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
´ Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit
with the cord attached is dangerous. It may result in injury or equipment
damage.
* When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
OK
Dropping the unit may result in injury or equipment damage.
´ Do not block the ventilation slots on the cabinet.
* Do not place books or any other papers on the ventilation slots.
* Do not install the unit in a closed space.
* Do not use the unit laying down or upside down.
Using the unit in these ways blocks the ventilation slots and prevents proper
airflow, leading to fire or other damage.
´ Do not touch the plug with wet hands.
Touching the plug with wet hands is dangerous and can cause electrical shock.
´ Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a
problem.
´ Periodically clean the area around the plug.
Buildup of dust, water, or oil on the plug may result in fire.
´ Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric
shock.
´ If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
Download from Www.Somanuals.com. All Manuals Search And DownloadP. RECAUTIONS
7
Suggestions for Maximizing Comfort
´ To lessen the chance of possible injury and to increase your comfort and
productivity while you operate the unit, we suggest the followings:
* Avoid less favorable body positioning. Sit back on the chair with
your back straight.
* Adjust the height of the chair so that the both soles touch the floor.
* Adjust the height of your chair, unit, or keyboard so that you
can keep your wrists straight while typing.
* Set the unit slightly below eye level.
´ Adjust brightness of the screen depending on the brightness of your
environment. Too dark or too bright of a screen can cause eyestrain.
´ Be sure to take adequate rests. A 10-minute rest period each hour is
suggested.
LCD Panel
´ The screen may have defective pixels. These pixels may appear as
slightly light or dark area on the screen. This is due to the characteristics
of the panel itself, and not the product.
´ The backlight of the LCD panel has a fixed life span.
When the screen becomes dark or begins to flicker, please contact your
dealer.
´ Do not press on the panel or edge of the frame strongly, as this will result
in damage to the screen. There will be prints left on the screen if the
pressed image is dark or black. If pressure is repeatedly applied to the
screen, it may deteriorate or damage your LCD panel. Leave the screen
white to decrease the prints.
´ Do not scratch or press on the panel with any sharp objects, such as a
pencil or pen as this may result in damage to the panel. Do not attempt to
brush with tissues as this may scratch the LCD panel.
8
PRECAUTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
1. INTRODUCTION
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
• 1280 x 1024 resolution p.36) incorporated 16 inch Color LCD Monitor
• DVI p.35) digital input (TMDS p.36)) compliant
• Horizontal scanning frequency of 31.5 ~ 80kHz
Horizontal (Digital): 31.5 ~ 64 kHz
Vertical scanning frequency of 50 ~ 85 Hz (1280 x 1024 ~ 75Hz)
Vertical (Digital): 60 Hz (VGA Text: 70 Hz)
• Auto Adjustment compliant and original “Picture Adjustment Program” software
included
• ColorManagement function incorporated
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or
damaged.
• LCD Monitor
• Power Cord
• Signal Cable (FD-C16)
• 4 of M4 x 16 mm mounting screws
• EIZO LCD Utility Disk
• Quick Reference
• User’s Manual
• LimitedWarranty
• Please retain the packing materials for future transference.
Download from Www.Somanuals.com. All Manuals Search And Dow1nl.oIaNdT. RODUCTION
9
1-3. Controls & Connectors
Front
(1) ScreenManager™
(2) AUTO Adjustment button
(3) Control Buttons
(4) Enter Button
(1)
(5) Power Switch
(6) Power Indicator*1
Indicated color
Green
Monitor’s status
Power -on
Yellow
FlashingYellow
(2 times for each)
Power save mode
Power save mode
for digital
Slowly flashingYellow Power is off
(2)(3)(4) (6)
(5)
Rear
(7) Power Connector
(8) Security Lock Slot*2
(9) DVI-I Input Connector
(10) 4 Holes for Mounting an Arm-Stand*3
(11) Stand (Detatchable)*3
(10)
(11)
(7)(8) (9)
*1
Regarding the power indicator for the “Off Timer”, see page 17.
*2
Allows for connection of a security cable. This lock supports Kensington’s MicroSaver
security system. For further information, please consult:
Kensington Technology Group 2855 Campus Drive, San Mateo, CA 94403 USA
800-650-4242, x3348
Intl: 650-572-2700, x3348 / Fax: 650-572-9675
*3
The L461 can be used with an optional arm stand by removing the original stand
(see page 27).
10 1. INTRODUCTION
Download from Www.Somanuals.com. All Manuals Search And Download.
2. CABLE CONNECTION
2-1. Before connecting
Before connecting your monitor to the PC, change the display screen settings (resolution
and frequency) in accordance with the charts below.
Analog Input
Resolution
640 x 480
640 x 480
720 x 400
800 x 600
832 x 624
1024 x 768
1152 x 864
1152 x 870
1280 x 960
1280 x 1024
Frequency
~ 85 Hz
66.67 Hz
70 Hz
Remarks
VGA, VESA
Apple Macintosh
VGA Text
~ 85 Hz
75 Hz
VESA
Apple Macintosh
VESA
~ 85 Hz
75 Hz
VESA
75 Hz
Apple Macintosh
Apple Macintosh
VESA
75 Hz
~ 75 Hz
• About Plug & Play of the monitor
When your computer and display support VESA DDC, the suitable resolution
and the refresh rate are set by just plugging your display into the computer without
any manual settings. When your computer system supports Plug & Play, the
Display Information File is not required except for installing the Color Profile.
Digital Input
Only the following resolutions with frequency can be displayed on this model.
Resolution
640 x 480
720 x 400
800 x 600
1024 x 768
1280 x 960
1280 x 1024
Frequency
60 Hz
Remarks
VGA
70 Hz
VGA Text
VESA
60 Hz
60 Hz
VESA
60 Hz
VESA
60 Hz
VESA
Download from Www.Somanuals.com. All Manuals Search A2nd. CDoAwBnlLoEad.CONNECTION 11
2-2. Connecting the signal cable
• Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the DVI-I connector at the rear of the
monitor and the other end of the cable into the video connector on the
PC.
After connecting, secure the connection with the screw-in fasteners.
[Analog Input]
Video Output Connector
D-Sub mini 15 pin
·Standard graphics board
·Macintosh G3 (Blue & White) / G4
FD-C16 (enclosed)
Video Output Connector
D-Sub 15 pin
Macintosh
Macintosh Adapter (Optional)
[Digital Input]
Video Output Connector
DVI
Digital graphics board
FD-C04 (Optional)
•
The L461 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple
Display Connector).
12 2. CABLE CONNECTION
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Plug the power cord into the power connector on the rear of the
monitor and plug the other end of the power cord into a power outlet.
WARNING
WARNING
• Use the enclosed power cord and connect to the standard
power outlet of your country. Be sure to remain within the
rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
• The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock.
3. Turn on the monitor’s power and then switch on the PC’s power.
Whenever finished, turn off the PC and the monitor.
Download from Www.Somanuals.com. All Manuals Search A2nd. CDoAwBnlLoEad.CONNECTION 13
3. ScreenManager
3-1. How to use the ScreenManager
As shown on the display, the ScreenManager is used to adjust the LCD monitor.
ScreenManager consists of main menus and sub menus. Adjustments are made using the
Enter and Control buttons (up, down, right and left) located on the front panel.
Enter Button
Control Buttons
Auto Adjustment Button
1. Entering the ScreenManager
Push the Enter Button once to display the main menu of the ScreenManager.
[ Main Menu ]
2. Making Adjustments and Settings
(1) Select the desired sub menu icon using the Control buttons and push the Enter
button. The sub menu appears.
(2) Use the Control buttons to select the desired setting icon and push the Enter
button. The setting menu appears.
(3) Use the Control buttons to make all required adjustments and push the Enter
button to save the settings.
3. Exiting the ScreenManager
(1) To return to the main menu, select the “Return” icon or push the down button
twice, followed by the Enter button.
(2) To exit the ScreenManager, select “Exit” icon and push the Enter button.
• Double clicking the Enter button at any time also exits the ScreenManager menu.
14 3. ScreenManager
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2. ScreenManager Adjustments and Settings.
The following table shows all the ScreenManager’s adjustment and setting menus.
“*” indicates adjustments of analog input only and “**” indicates digital input only.
Main menu
Screen
Sub menu
Clock*
Reference
Phase*
Position*
Resolution*
Smoothing
Contrast/Brightness
Range Adjustment*
Color-
Management Standard Mode
Custom Mode
Temperature
Temperature
Saturation
Hue
4. ADJUSTMENT(p.18)
Gain
Save
PowerManager DVI DMPM**
VESA DPMS*
Others
Screen Size
Border Intensity
OffTimer
Set the monitor’s off timer to
on or off. (p.17)
Menu Position
Menu OffTimer
Translucent
Adjust the menu position.
Set the menu displaying time.
Set the transparency of the
white background for the menu.
Return to the factory default
settings. (p.34)
Reset
Information
Language
Information
Review the ScreenManager’s
settings, model name, Serial
Number and usage time*1.
English, German, French, Spanish, Select the ScreenManager’s
Italian, Swedish and Japanese language.
*1 Due to the inspection on the factory, the usage time may not “0 hour” at shipping.
3. ScreenManager 15
Download from Www.Somanuals.com. All Manuals Search And Download.
3-3. Useful Functions
Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked function
• Auto adjustment button adjustments and settings in the
ScreenManager.
Unlocked function
• Adjustment of contrast and brightness by the control buttons.
• To lock
Press on the Auto adjustment button while switching on the monitor’s power switch
on the front panel.
• To unlock
Switch off the monitor’s power by the power switch on the front panel, then hold
down the Auto adjustment button once again and turn the power back on.
EIZO Logo Disappearing function
When switching on the power, the EIZO logo is displayed for a while. If you desire to
undisplay this logo, use this function.
• To undisplay
Switch off the monitor’s power by the power switch on the front panel. Turn the
power back again with pressing the enter button on the front panel.
• To display again
Switch off the monitor’s power by the power switch on the front panel. Turn the
power back again with pressing the enter button on the front panel.
16 3. ScreenManager
Download from Www.Somanuals.com. All Manuals Search And Download.
Off Timer
The off timer function causes the monitor to automatically enter a power off mode after a
predetermined amount of time has lapsed. This function was created to reduce
afterimage p.35) characteristics that are particular to LCD monitors when the monitor
screen is left on for a long period without use.
[Procedure]
(1) Select “Off Timer” in the ScreenManager “Others” menu.
(2) Select “Enable” and press the right and left buttons to adjust the “On Period”
(1 to 23 hours).
[Off timer system]
PC
Monitor
LED
Green
On Period (1H~23H)
Last 15 min. in "On period"
"On period" expired
Operation
Advance Notice*1
"Power Off" Mode
Green Flashing
Flashing yellow slowly
*1Advance notice (LED flashing green) will be given 15 minutes before the monitor
automatically enters the “Power Off” mode. To delay entering the “Power Off” mode,
press the power switch during the advance notice period. The monitor will continue to
operate for an additional 90 minutes.
Press the power switch to return to a normal screen.
• The off timer function works while the PowerManager is active, but there is no
advance notice before the monitor’s power is switched off.
3. ScreenManager 17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. ADJUSTMENT
4-1. Screen Adjustment
• Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments.
Screen adjustments for the LCD monitor should be used in suppressing screen flickering
and also for adjusting the screen to its proper position. There is only one correct position
for each display mode. When using the analog input, it is also recommended to use the
ScreenManager function when first installing the display or whenever changing the
system. For convenience, an easy set-up Program installed on the utility disk to assist in
the set-up procedure is provided.
When using the digital input, the monitor displays the digital input image correctly based
on its pre-setting data. Please adjust the contrast and brightness as desired with referring
page 21.
1. Push the Auto adjustment button on the front panel.
The message “Your setting will be lost, if you press again now.” appears and
remains on the screen for 5 seconds. While the message is on the screen, push the
Auto adjustment button again to automatically adjust the clock, phase, screen
position and resolution. If you do not wish to do adjust the screen, do not push the
Auto adjustment button again.
If the appropriate screen can not be made by using the Auto adjustment button,
adjust the screen through the following procedures.
2. Install the “Screen adjustment program”.
Having read the “readme.txt” file, install and run the “Screen adjustment program”
in the enclosed EIZO LCD utility disk.
Step by step adjustment is provided by the wizard guide.
• If the user’s operating system has no utility disk (e.g. OS/2), we recommend
setting the desktop pattern to that as shown in the diagram below.
Every-other-dot
pattern
18 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Adjust by using “Screen” menu in the ScreenManager.
(1) Vertical bars appear on the screen.
Æ
Use the “Clock” p.35) adjustment
Select the “Clock” and eliminate the vertical bars by using the right and left of
the control buttons. Do not continuously press the control buttons, as the
adjustment value will change quickly and make it difficult to locate the most
suitable adjustment point.
If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment
as follows.
• When adjusting the “Clock,” the horizontal screen size will also change.
(2) Horizontal flickering, blurring or bars appear on the screen.
Æ
Use the “Phase” p.36) adjustment.
Select the “Phase” and eliminate the horizontal flickering, blurring or bars by
using the right and left buttons.
• Horizontal bars may not completely disappear from the screen depending on the
PC.
4. ADJUSTMENT 19
Download from Www.Somanuals.com. All Manuals Search And Download.
(3) The screen position is incorrect.
Æ
Use the “Position” adjustment.
The correct displayed position of LCD monitor is decided because the number
and the position of the pixels are fixed. The “Position” adjustment moves the
image to the correct position.
Select “Position” and adjust the position so all the dotted line appear around
screen, by using the up, down, right and left buttons.
(4) Screen image is smaller or larger than the actual screen images.
Æ
Use the “Resolution” adjustment.
Adjustment is needed when the input signal resolution and the resolution now
being displayed is different.
Select “Resolution” and confirm if the resolution now being displayed is the
same as the input resolution. If it is not, adjust the vertical resolution using
the up and down button and adjust the horizontal resolution using the right
and left buttons.
Smaller than the actual screen images.
Adjusted to actual screen
Larger than the actual screen images.
20 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To set the Output signal range (Dynamic Range) of the signal.
Use the “Range Adjustment”.p.36)
Æ
This controls the level of output signal range to display the whole color gradation
(256 colors). Select the “Range Adjustment” in the “ColorManagement” menu.
[Auto]
Push the Auto adjustment button on the front panel while displaying the “Range
adjustment” menu to automatically adjust the range. The screen blanks for a
moment, and adjusts the color range to display the whole color gradation of the
current output signal.
• Pressing Auto adjustment button while displaying the contrast/brightness
adjustment screen (appeared by pressing the control buttons directly) adjusts the
range automatically.
5. To set the Contrast of the screen.
Æ
Use the “Contrast” adjustment.
This controls the brightness for the each color (red, blue and green) at a same time.
Select “Contrast/Brightness” in the screen menu and adjust by using the right and
left buttons.
6. To set the Brightness of the screen.
Æ
Use the “Brightness” adjustment.
This controls the brightness for the entire screen. The brightness of the entire screen
is controlled by changing the brightness if the backlight.
Select “Contrast/Brightness” in the screen menu and adjust by using the up and
down buttons.
• Directly pressing the control buttons also adjusts the contrast and brightness. Press
the “Enter” button to save and exit the settings after the adjustment.
4. ADJUSTMENT 21
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2. Displaying the low resolutions
The lower resolutions are enlarged to full screen automatically. Using the “ScreenSize”
function in the “Others” menu enables to change the screen size.
1. To enlarge the screen size when displaying a low resolution.
Æ
Select “Screen Size”
Select the “Screen Size” in the others menu and select the screen size by using the
up and down buttons.
• Full
Displays the picture on the screen in full, irrespective of the
picture’s resolution. Since the vertical resolution and the
horizontal resolution are enlarged at different rates, some
images may appear distorted.
• Enlarged
• Normal
Displays the picture on the screen in full, irrespective of the
picture’s resolution.Since the vertical resolution and horizontal
resolution are enlarged at same rates, some horizontal or
vertical image may disappear.
Displays the picture at the actual Screen resolution.
Example: Displaying 1024 x 768
Enlarged
Full
Normal
1280 x 1024
1280 x 960
1024 x 768
22 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
2. To be clear-cut the letters or lines of the enlarged screen.
Switch the “Smoothing” setting.
Æ
Select “Smoothing” in the screen menu and switch the setting to “Off” by using the
left button.
• “Smoothing” is disabled in the following cases.
* 1280 x 1024 of resolution
* “Enlarged” mode in “Screen Size” setting with the 1280 of the horizontal
resolution (i.e. 1280 x 960)
* “Normal” mode in the “Screen Size” setting
3. To set the brightness of the black area surrounding the image.
Æ
Set the “Border Intensity”
In the “Normal” mode, the outer area (border) is usually black.
Select “Border Intensity” in the others menu and adjust by using the right and left
buttons.
Border
4. ADJUSTMENT 23
Download from Www.Somanuals.com. All Manuals Search And Download.
4-3. Color Adjustment
The “ColorManagement”menu in the ScreenManager enables to change the color of the
screen.
Before the Color adjustment
• Allow the LCD monitor to stabilize for at least 20 minutes before making color
adjustments.
• After finishing each adjustment in the custom mode, select “Save” icon to resister the
adjustment. Otherwise, the adjustment will be lost.
• The adjustment values represent the current level within the specific adjustment only.
They are available only as a reference tool. (To create a uniform white or black
screen, the percentages for each will probably not be the same.)
• In the analog input, perform the “Range Adjustment” (p.21) before making the color
adjustments . The gradation pattern like below is recommended for the “Range
Adjustment”.
1. To change the color tone of the white.
Æ
Set the “Temperature”.p.35)
The “Temperature” can be set from 4,000 K to 10,000 K , in 500 K increments
(including 9,300 K). The default setting is “OFF”.
To resister the adjustment in the custom mode, select the “Save” icon and then push
the enter button.
• Setting the temperature under 4,000 K or over 10,000 K invalidates the color
temperature setting. (The color temperature’s setting turns “OFF”.)
• Adjusting the “Gain” (p. 25) invalidates the color temperature setting. (The
color temperature’s setting turns “OFF”.)
24 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
2. To change the saturation.
Æ
Use the “Saturation” adjustment.
The “Saturation” can be selected from -64 to 64. Setting the minimum level (-64)
turns the image to the monochrome.
To register the adjustment, select the “Save” icon and then push the enter button.
• The “Saturation” adjustment may cause undisplayable color tone.
3. To change the flesh color, etc.
Æ
Use the “Hue” adjustment.
The “Hue” can be selected from -16 to 16.
To register the adjustment, select the “Save” icon and then push the enter button.
• The “Hue” adjustment may cause undisplayable color tone.
4. To adjust each color (red, green and blue).
Æ
Use the “Gain”p.35) adjustment.
By adjusting the red, green and blue color tones for each mode, custom colors can
be defined.
The 100 % indicates unadjusted condition.
Display a white or gray background image and adjust the “Gain”.
To register the adjustment, select the “Save” icon and then push the Enter button.
• The “Gain” adjustment may cause undisplayable color tone.
• Adjusting the “Gain” invalidates the color temperature setting. (The color
temperature’s setting turns “OFF”. )
4. ADJUSTMENT 25
Download from Www.Somanuals.com. All Manuals Search And Download.
4-4. Power-save Setup
• Do your part to conserve energy, turn off the monitor when you are finished using it.
Disconnecting the monitor from the power supply is recommended to save energy
completely.
Analog Input
This monitor complies with the VESA DPMS p.36) standard.
1. Set the PC’s power saving settings.
2. Select “VESA DPMS” in the “PowerManager” menu.
[Power saving system]
PC
On
Monitor
LED
Operation
Green
STAND-BY
SUSPEND Power saving
OFF
Power saving mode
Yellow
Operate the mouse or keyboard to return to a normal screen.
Digital Input
p.35)
This monitor complies with the DVI DMPM
.
1. Set the PC’s power saving settings.
2. Select “DVI DMPM” in the “PowerManager” menu.
[Power saving system]
PC
On
Monitor
Operation
LED
Green
Yellow
Power saving
Power saving
Flashing yellow
(2 times for each)
Off mode
Power saving
Operate the mouse or keyboard to return to a normal screen from the Power save
mode of the PC. Power on the PC to return a normal screen from the Off mode of
the PC.
26 4. ADJUSTMENT
Download from Www.Somanuals.com. All Manuals Search And Download.
5. ATTACHING AN ARM STAND
The L461 can be used with an arm stand by removing the tilt stand and attaching the
arm stand to the terminal.
´ Use an arm stand that satisfies the followings.
• When using the L461 with an arm stand,
the arm stand must be VESA approved :
* Use an arm stand with a 75 mm x 75 mm hole
spacing on the arm mounting pad.
* Use an arm stand that is able to support an object
weighting 8.0 kg.
M4 x 16 mm
75 mm
75 mm
´ TÜV/GS approved arm stand.
´ Use an arm stand with sufficient stability
(mechanical firmness) to support the weight of the
monitor.
´ Use an arm stand remaining that position where it
is manually moved.
´ Use an arm stand with the ability to tilt the monitor
forward and backward.
´ Please connect cables after attaching an arm stand.
Setup Procedure
1.
Lay the L461 down as shown below. Do not scratch the panel.
Soft Cloth or
Cushion
2.
Remove the tilt stand by loosening the screws (2 pcs of M4 x 10 mm).
5.ATTACHING AN ARM STAND 27
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Attach an arm stand to the L461 securely.
WARNING
´ When attaching an arm stand, please refer to the user’s manual
of the arm stand and install the unit securely with the enclosed
screws.
Not doing so may cause the unit to come unattached, which may
result in injury or equipment damage. When the unit is dropped,
please ask your dealer for advice. Do not continue using a
damaged monitor. Using a damaged monitor may result in fire or
electric shock.
When reattaching the tilt stand, please use the same screws and
tighten them securely.
4 Mounting Screws
(enclosed):
M4 x 16 (mm)
Arm-stand
For the Portrait display, rotate the monitor clockwise and use the software for the
portrait.
28 5.ATTACHINGDAowNnlAoaRdMfroSmTWAwNwD.Somanuals.com. All Manuals Search And Download.
6. TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO
dealer.
No picture problems Æ See No.1 ~ No.2
Imaging problems ÆSee No.3 ~ No.11
Other problemsÆSee No.12 ~ No.16
Problems
Points to check with possible solutions
1. No picture
Check that the power cord is correctly connected.
If the problem persists, turn off the monitor power for a
few minutes, then turn it back on and try again.
• Indicator status: Off
• Indicator status: Green
• Indicator status: Yellow
Check the “Contrast and Brightness” settings.
Minimum settings will cause screen to be blank.
Try pressing a key on the keyboard, or clicking the mouse.
(p.26)
• Indicator status:
Try pressing the power switch.
Slowly flashing Yellow
These messages appear when the signal is not inputted
correctly, even if the monitor functions properly.
2. Following messages
appear. (Error messages
will remain on the screen
for 40 seconds.)
When the image is displayed correctly after a short time,
there is no problem with the monitor.
(Some PCs do not output the signal soon after powering
on.)
Check that the PC is turned ON.
Check that the signal cable is properly connected to the PC
or graphics board.
• Whenever an error signal
message appears, the
signal frequency will be
displayed in red.
Use the graphics board’s utility software to change the
frequency setting. (Refer to the manual of the graphics
board.)
(Example)
6.TROUBLESHOOTING 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems
Points to check with possible solutions
3. Display position is
incorrect.
Adjust the image position using the “Position”.
(p.20)
If the problem persists, use the graphics board’s utility
software to change the display position if available.
4. Screen image is smaller or
larger than the actual
screen images.
Adjust the resolution using the “Resolution”. (p.20)
Decrease the vertical bars using the “Clock”. (p.19)
5. Vertical bars of distortion
appear.
Decrease the horizontal bars using the “Phase’. (p.19)
6. Horizontal bars of
distortion appear.
7. Letters and lines appear
blurred.
Switch the “Smoothing” mode to “Off”. (p.23)
Adjust the “contrast and brightness”.
8. The screen is too bright or
too dark.
(The backlight of the LCD monitor has a fixed life span.
When the screen becomes dark or begins to flicker,
please contact your dealer.)
When the screen image is changed after displaying the
same image for a long period, an afterimage may appear.
Use the “Off Timer” function and avoid keeping the screen
on all the time. (p.17)
9. Afterimages appear.
10. The screen has defective
pixels (e.g. slightly light
or dark).
This is due to the characteristics of the panel itself, and not
the LCD product.
30 6.TROUBLESHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems
Points to check with possible solutions
11. Fingerprints remain on
the screen.
Leaving the screen white may solve the problem.
“Smoothing” is disabled in the following cases.
• 1280 x 1024 of resolution
12. The “Smoothing” can not
be selected.
•
“Enlarged” mode in the “Screen Size” setting with the
1280 of horizontal resolution (i.e. 1280 x 960)
• “Normal” mode in the “Screen Size” setting.
13. The utility disk is unable
to be opened (for
Some Macintosh without PC-Exchange do not allow the
utility disk to be opened. Please set the desktop pattern to
every-other-dot before adjustment. (p.18)
Macintosh only).
The adjustment lock is probably on. To unlock: switch the
LCD monitor off. Then, while pressing the Auto
adjustment button, switch the power on. (p.16)
14. • The Enter button does
not operate.
• The Auto adjustment
button does not operate.
15. The Auto adjustment
button does not work
properly.
The Auto sizing function is intended for use on the
Macintosh and on AT-compatible PC running Windows.
It may not work properly in either of the following cases.
When running an AT-compatible PC on MS-DOS (Not
windows).
The background color for the “wall paper” or “desktop”
pattern is set to black.
Some signals from a graphics board may not function
properly.
16. Frequency does not
change after installing
“Monitor information
file” in the attached
utility disk on Windows
95/98/Me/2000.
Use the graphics board’s utility software to change the
input signal frequency.
6.TROUBLESHOOTING 31
Download from Www.Somanuals.com. All Manuals Search And Download.
7. CLEANING
Periodic cleaning is recommended to keep the monitor looking new and to prolong its
operation lifetime.
• Never use thinner, benzene, alcohol (ethanol, methanol,or
isopropyl alcohol), abrasive cleaners, or other strong solvents,
as these may cause damage to the cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild
detergent. Do not spray wax or cleaner directly onto the cabinet.
LCD Panel
The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.
If necessary, stubborn stains can be removed by moistening part of a cloth with water to
enhance its cleaning power.
32 7. CLEANING
Download from Www.Somanuals.com. All Manuals Search And Download.
8. SPECIFICATIONS
LCD Panel
41 cm (16.0 inch), TFT color LCD Panel with Anti-
Glare Hard Coating
Viewing Angle: Horizontal: 130º, Vertical: 160º
(at Contrast Ratio > 5)
Dot Pitch
0.248 mm
Scan Frequency
Horizontal:
Vertical:
31.5kHz - 80 kHz (Automatic)
50 Hz-85 Hz (Automatic)
(1280 x 1024: up to 75 Hz)
Horizontal (Digital): 31.5kHz - 64 kHz
Vertical (Digital): 60Hz (VGA text: 70Hz)
Resolution
1280 dots x 1024 lines
Dot Clock (Max)
135 MHz
108 MHz(Digital)
Display Colors
Display Area
16 milion colors (max)
317.4 mm (H) x 253.9 mm (V) (12.5” (H) x 10.0” (V))
(Viewable image size: 406 mm (16.0”))
100-120/200-240 VAC±10% , 50/60 Hz, 0.7 A/0.4 A
Normal: 40 W
Power Supply
Power Consumption
Power Saving Mode: Less than 3 W
DVI-I x 1
Sync Separate, TTL, Positive/Negative
Video : 0.7 Vp-p/75 Ω, Positive
TMDS (Single Link)
Input Connector
Input Signal
Analog
Digital
Signal registration
Plug & Play
35 (Analog Factory Preset: 21)
VESA DDC 2B
Dimensions
384 mm (W) x 387.2 mm (H) x 171.4 mm (D)
(15.1” (W) x 15.0” (H) x 6.7” (D))
384 mm (W) x 325 mm (H) x 69 mm (D)
(15.1” (W) x 12.8” (H) x 2.7”(D))
5.7 kg (12.6 lbs.)
Dimensions (without stand)
Weight
Weight(without stand)
Temperature
4.3 kg (9.5 lbs.)
Operating:
Storage:
0°C to 35°C (32°F to 95°F)
-20°C to 60°C (-4°F to 140°F)
Humidity
30% to 80% R.H. Non-condensing
Download from Www.Somanuals.com. All Manuals Search And Do8w.nSloPadE. CIFICATIONS 33
Dimensions
384 (15.1)
319.2 (12.6)
36.8(1.4)69(2.7)
25°
3°
167.5(6.6)
170(6.7)
171.4(6.7)
FRONT
SIDE
REAR
Default Settings
Default Settings are as follows:
ScreenManager menu Default Settings
Contrast
100%
Brightness
100%
Smoothing
Color Mode
Temperature
PowerManager
On
Standard
Off
VESA DPMS
DVI DMPM(Digital Input)
Full Screen
Disable
Screen Size
Off Timer
Menu Off Timer
Language
45 seconds
English
34 8.SPECIFICATIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
9. GLOSSARY
Afterimage
The Afterimage is particular to LCD monitors when the monitor screen is left on for
a long period without use. The “Afterimage” can be removed gradually by
changing the displayed image.
Clock
With the analog input signal display, the analog signal is converted to a digital
signal by the LCD circuitry. To convert the signal correctly, the LCD monitor needs
to produce the same number clock pulse as the dot clock of the graphics system.
When the clock pulse is not correctly set, some vertical bars of distortion are
displayed on the screen.
ColorTemperature (Temperature)
Color Temperature is a method to measure the white color tone, generally indicated
in degrees Kelvin. At high temperatures the white tone appears somewhat blue,
while at lower temperatures it appears somewhat red. Computer monitors
generally give best perfoemance at high temerature settings.
5000K: Slightly reddish white.
6500K: Warm-white tone, similar to white papaer or daylight.
9,300K: Slightly bluish white.
DVI
(Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the PC directly
without loss with the signal transition method “TMDS”. There are two kinds of
DVI connectors. One is DVI-D connector for digital signal input only. The other is
DVI-I connector for both digital and analog signal inputs.
DVI-DMPM
(DVI Digital Monitor Power Management)
The Power management system for the digital interface. The “Monitor ON” status
(operation mode) and the “Active Off” status (power-saving mode) are indispensable
for the DVI-DMPM as the monitor’s power mode.
Gain Adjustment
Adjusts each color parameter for red, green and blue. The color of the LCD
monitor is displayed through the color filter of the LCD panel. Red, green and blue
are the three primary colors. The colors on the monitor are displayed by
combining these three colors. The color tone can change by adjusting the
illumination amount passed through each color’s filter.
Download from Www.Somanuals.com. All Manuals Search And Download.9.GLOSSARY 35
Phase
The phase adjustment decides the sampling timing point for converting the analog
input signal to a digital signal. Adjusting the phase after the clock adjustment will
produce a clear screen.
Range Adjustment
The Range Adjustment controls the level of output signal range to display the whole
color gradation.
Resolution
The LCD panel consists of a fixed number of pixel elements which are illuminated
to form the screen image.
The EIZO L461 consists of 1280 horizontal pixels and 1024 vertical pixels. At a
resolution of 1280 X 1024, all pixels are used and the image is displayed as a full
screen. At the lower display modes of 640 x 480 or 800 x 600, the images are
displayed in the center of the screen using a smaller portion if the pixels.
TMDS
(Transition Minimized Differential Signaling)
A signal transition method for the digital interface.
VESA DPMS
The acronym VESA stands for “Video Electronics Standards
Association,” and DPMS stands for “Display Power Management Signaling.”
DPMS is a communication standard that PCs and graphics boards use to implement
power savings on the monitor side.
36 9.GLOSSARYDownload from Www.Somanuals.com. All Manuals Search And Download.
10.INDEX
A
O
P
ADJUSTMENT --------------------------- 18
Adjustment Lock ------------------------- 16
Afterimage ----------------------------- 17,35
ATTACHING AN ARM STAND -------- 27
Off timer------------------------------- 15, 17
Others -------------------------------------- 19
Package Contents ------------------------ 9
Phase ----------------------------- 15, 19, 36
Pin Assignment ---------------------------- i
Position -------------------------------- 15, 20
Power consumption--------------------- 33
Power Indicator ----------------- 10, 17, 26
PowerManager ----------------------- 15, 26
Power-save Setup ----------------------- 26
PRECAUTIONS --------------------------- 4
PresetTiming Chart ----------------------- i
B
Before connecting ----------------------- 11
Border Intensity --------------------- 15, 23
Brightness ---------------------------- 15, 21
C
CABLE CONNECTION ----------------- 11
CLEANING -------------------------------- 32
Clock------------------------------ 15, 19, 35
Color Adjustment------------------------- 24
ColorManagement ------------- 15, 21, 24
Contrast ------------------------------- 15, 21
Controls & Connectors------------------ 10
Custom Mode ----------------------------- 15
R
S
Range Adjustment ------------- 15, 21, 24
Reset --------------------------------------- 15
Resolution ---------- 9, 11, 15, 24, 33, 36
D
Default setting ---------------------------- 34
Dimensions -------------------------------- 34
Displaying the low resolutions -------- 22
DVI ---------------------------------------9, 35
DVI-DMPM ---------------------- 15, 26, 35
Saturation ----------------------------- 15, 25
Save ----------------------------------- 15, 24
Screen --------------------------------- 15, 19
Screen Adjustment ---------------------- 18
Screen Size -------------------------- 15, 22
ScreenManager---------------------- 15, 26
ScreenManager Adjustments
E
EIZO LCD utility disk ----------------9, 18
EIZO Logo Disappearing function ---- 16
and Settings----- 15
Security Lock Slot ----------------------- 10
Smoothing ---------------------------- 15, 24
SPECIFICATIONS ----------------------- 33
G
Gain ------------------------------- 15, 25, 35
GLOSSARY ------------------------------- 35
T
V
H
Temperature --------------------- 15, 24, 36
TMDS ------------------------------------9, 36
Translucent -------------------------------- 15
TROUBLE SHOOTING ----------------- 29
How to use the ScreenManager ------ 14
Hue ------------------------------------- 15, 25
I
Information -------------------------------- 15
VESA DPMS-------------------- 15, 26, 36
L
Language ---------------------------------- 15
M
Menu OffTimer --------------------------- 15
Menu Position----------------------------- 15
10. INDEX 37
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
38 10. INDEX
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX / ANHANG / ANNEXE
Pin Assignment
Pin-Belegung
Affectation des Broches
* DVI-I Connector
Pin
No.
Pin
No.
Pin
No.
Signal
Signal
Signal
NC
TMDS Data1/3
Shield
1
9
2
3
4
5
6
7
8
1
2
TMDS Data2- 11
TMDS Data2+ 12
21
22
C1
C3
C2
C4
10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
TMDS Clock
Shield
C5
NC
NC
TMDS Data2/4
3
4
13
23 TMDS Clock+
24 TMDS Clock-
Shield
NC*
14
+5V Power
Ground (return
5
NC
15 for +5V, Hsync C1 Analog Red
and Vsync)
DDC Clock
(SCL)
6
16 Hot Plug Detect C2 Analog Green
7 DDC Data (SDA) 17 TMDS Data0- C3 Analog Blue
Analog
Vertical Sync
Analog
Horizontal Sync
Analog Ground
C5 (analog R,G,&B
return)
8
18 TMDS Data0+ C4
TMDS Data0/5
9
TMDS Data1- 19
Sheild
NC
10 TMDS Data1+ 20
(*NC: No Connection)
PresetTiming Chart for Analog input
Timing-Übersichten für Analog Eingang
Synchronisation des Signaux pour Analog numerique
Based on the signal diagram shown below 21 factory presets have been registered in
the monitor's microprocessor.
Der integrierte Mikroprozessor des Monitors unterstützt 21 werkseitige
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
21 signaux ont été enregistrés en usine dans le microprocesseur du moniteur,
conformément au diagramme de synchronisation ci-dessous.
A
B
Front Porch
Sync Period
Vordere Schwarzschulter
Synchronimpuls
Front avant
Délai de
synchronisation
C
D
E
F
Back Porch
Blanking Period
Display period
Total cycle
Hintere Schwarzschulter
Austastzeit
Front arrière
Délai de clignotement
Délai d'affichage
Cycle total
Display-Zeit
Kompletter Zyklus
Sync-Signalpegel
H
Sync signal level
Niveau du signal de
synchronisation
V
Video signal level
Video-Signalpegel
Niveau du signal vidéo
APPENDIX
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode
Dot Clock
MHz
Frequencies
A: Front Porch
B: Sync Period
H
V
H
V
H
V
kHz
Hz
µs/
Dot
ms/
Line
µs/
Dot
ms/
Line
VGA
0.636/
16
0.318/
10
3.813/
96
0.054/
2
640 x 480 25.175
31.468
31.468
35.00
49.73
68.68
74.763
37.86
37.5
59.941
70.087
66.67
74.55
75.06
74.763
72.81
75.00
85.01
56.25
60.32
72.19
75.00
85.061
60.00
70.07
75.03
85.0
VGA
0.636/
18
0.381/
12
3.813/
108
0.064/
2
720 x 400 28.322
Macintosh
640 x 480
2.116/
64
0.086/
3
2.116/
64
0.086/
3
30.24
57.28
Macintosh
832 x 624
0.559/
32
0.020/
1
1.117/
64
0.060/
3
Macintosh
1152 x 870 100.0
0.320/
32
0.044/
3
1.280/
128
0.044/
3
Macintosh
1280 x 960 126.2
0.190/
24
0.013/
1
1.204/
152
0.040/
3
VESA
640 x 480
0.508/
24
0.026/
9
1.270/
40
0.079/
3
31.5
31.5
36.0
36.0
40.0
50.0
49.5
56.25
VESA
640 x 480
0.508/
16
0.027/
1
2.032/
67
0.080/
3
VESA
640 x 480
1.556/
56
0.023/
1
1.556/
56
0.069/
3
43.27
35.16
37.88
48.08
46.88
53.674
48.36
56.48
60.02
68.68
67.50
63.98
79.97
VESA
800 x 600
0.667/
24
0.028/
1
2.000/
72
0.057/
2
VESA
800 x 600
1.000/
40
0.026/
1
3.200/
128
0.106/
4
VESA
800 x 600
1.120/
56
0.770/
37
2.400/
120
0.125/
6
VESA
800 x 600
0.323/
16
0.021/
1
1.616/
80
0.064/
3
VESA
800 x 600
0.569/
32
0.019/
1
1.138/
64
0.056/
3
VESA
1024 x 768 65.0
0.369/
24
0.062/
3
2.092/
136
0.124/
6
VESA
1024 x 768 75.0
0.320/
24
0.053/
3
1.813/
136
0.106/
6
VESA
1024 x 768 78.75
0.203/
16
0.017/
1
1.219/
96
0.050/
3
VESA
1024 x 768 94.5
0.508/
48
0.015/
1
1.016/
96
0.044/
3
VESA
1152 x 864 108.0
0.593/
64
0.015/
1
1.185/
128
0.044/
3
75.00
60.02
75.02
VESA
1280 x 1024 108.0
0.444/
48
0.016/
1
1.037/
112
0.047/
3
VESA
1280 x 1024 135.0
0.119/
16
0.013/
1
1.067/
144
0.038/
3
ii
APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
C: Back Porch
D: Blanking Period
E:Display Period
F:Total Cycle
H
V
H
V
H
V
H
V
µs/
Dot
ms/
Line
µs/
Dot
ms/
Line
µs/
Dot
ms/
Line
µs/
Dot
ms/
Line
1.907/
48
1.048/
33
6.356/
160
1.430/
45
25.442/
640
15.254/
480
31.778/ 16.683/
800 525
1.907/
54
1.111/
35
6.356/
180
1.556/
49
25.422/
720
12.712/
400
31.778/ 14.267/
900 449
3.175/
96
1.114/
39
7.407/
224
1.286/
45
21.164/
640
13.714/
480
28.571/ 15.000/
864 525
3.911/
224
0.784/
39
5.586/
320
0.865/
43
14.524/
832
12.549/
624
20.111/ 13.414/
1152 667
1.440/
144
0.568/
39
3.040/
304
0.655/
45
11.250/
1152
12.667/
870
14.560/ 13.322/
1456 915
1.838/
232
0.482/
36
3.233/
408
0.535/
40
10.143/
1280
12.841/
960
13.376/ 13.376/
1688 1000
3.810/
128
0.528/
28
5.587/
192
0.634/
40
20.317/
640
12.678/
480
26.413/ 13.735/
832 520
3.810/
120
0.427/
16
6.349/
200
0.533/
20
20.317/
640
12.800/
480
26.667/ 13.333/
840 500
2.222/
80
0.578/
25
5.333/
192
0.670/
29
17.778/
640
11.093/
480
23.111/ 11.764/
832 509
3.556/
128
0.626/
22
6.222/
224
0.711/
25
22.222/
800
17.067/
600
28.444/ 17.778/
1024 625
2.200/
88
0.607/
23
6.400/
256
0.739/
28
20.000/
800
15.840/
600
26.400/ 16.579/
1056 628
1.280/
64
0.478/
23
4.800/
240
1.373/
66
16.000/
800
12.480/
600
20.800/ 13.853/
1040 666
3.232/
160
0.448/
21
5.172/
256
0.533/
25
16.162/
800
12.800/
600
21.333/ 13.333/
1056 625
2.702/
152
0.503/
27
4.409/
248
0.578/
31
14.222/
800
11.179/
600
18.631/ 11.756/
1048 631
2.462/
160
0.600/
29
4.923/
320
0.786/
38
15.754/
1024
15.880/
768
20.677/ 16.666/
1344 806
19.20/
144
0.513/
29
4.053/
304
0.673/
38
13.653/
1024
16.599/
768
17.707/ 14.272/
1328 806
2.235/
176
0.466/
28
3.657/
288
0.533/
32
13.003/
1024
12.795/
768
16.660/ 13.328/
1312 800
2.201/
208
0.524/
36
3.725/
352
0.582/
40
10.836/
1024
11.183/
768
14.561/ 11.765/
1376 808
2.370/
256
0.474/
32
4.148/
448
0.553/
36
10.667/
1152
12.800
864
14.815/ 13.333/
1600 900
2.296/
248
0.594/
38
3.778/
408
0.656/
42
11.852/
1280
16.005
1024
15.630/ 16.661/
1688 1066
1.837/
248
0.475/
38
3.022/
408
0.525/
42
9.481/
1280
12.804/
1024
12.504/ 13.329/
1688 1066
APPENDIX iii
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
iv APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
[Applicable to gray (standard color version only).]
Congratulations!
You have just purchased a TCO’99 approved and labelled
product! Your choice has provided you with a product developed
for professional use. Your purchase has also contributed to
reducing the burden on the environment and also to the further
development of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for
encouraging the adaptation of goods and services to the environment. The main problem, as
far as computers and other electronics equipment are concerned, is that environmentally
harmful substances are used both in the products and during their manufacture. Since it is not
so far possible to satisfactorily recycle the majority of electronics equipment, most of these
potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that
are important from the viewpoints of both the work (internal) and natural (external)
environments. Since all methods of electricity generation have a negative effect on the
environment (e.g. acidic and climate-influencing emissions, radioactive waste), it is vital to
save energy. Electronics equipment in offices is often left running continuously and thereby
consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which provides for
international and environmental labelling of personal computers. The labelling scheme was
developed as a joint effort by the TCO (The Swedish Confederation of Professional
Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation)
and Statens Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability,
emission of electric and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals,
brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among
other things. The product must be prepared for recycling and the manufacturer is obliged to
have an environmental policy which must be adhered to in each country where the company
implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a
certain period of inactivity, shall reduce its power consumption to a lower level in one or
more stages. The length of time to reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the
reduction of electric and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this
product.
The complete environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): development@tco.se
Current information regarding TCO’99 approved and labelled products may also be
Download from Www.Somanuals.com. All Manuals Search And Download.
[Applicable to gray (standard color version only).]
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and
housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of
the plastic in a computer casing can consist of flame retardant substances. Most flame
retardants contain bromine or chloride, and those flame retardants are chemically related to
another group of environmental toxins, PCBs. Both the flame retardants containing bromine
or chloride and the PCBs are suspected of giving rise to severe health effects, including
reproductive damage in fish-eating birds and mammals, due to the bio-accumulative*
processes. Flame retardants have been found in human blood and researchers fear that
disturbances in foetus development may occur.
The relevant TCO’99 demand requires that plastic components weighing more than 25
grams must not contain flame retardants with organically bound bromine or chlorine. Flame
retardants are allowed in the printed circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of
certain computer displays. Cadmium damages the nervous system and is toxic in high doses.
The relevant TCO’99 requirement states that batteries, the colour-generating layers of
display screens and the electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous
system and is toxic in high doses. The relevant TCO’99 requirement states that batteries
may not contain any mercury. It also demands that mercury is not present in any of the
electrical or electronics components associated with the labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during
the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing
printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased
risks of skin cancer (malignant melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages
the nervous system and in higher doses, causes lead poisoning. The relevant TCO’99
requirement permits the inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
Download from Www.Somanuals.com. All Manuals Search And Download.
For U.S.A, Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: 562 431 5011
declare that the product
Trade name: EIZO
Model: FlexScan L461
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures.
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
*Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to
keep interference within the limits of a Class B digital device.
-AC Cord
-Shielded Signal Cable (enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
|