ECOM-EF24F2G
Mixed Gigabit Ethernet Switch
Windows In-Band Management
24 × 10/100Base-TX ports
2 x 1000Base-T Gigabit Ports
Auto MDI/MDI-X
VLAN, Priority, Bandwidth Control
Trunking, Loop Detection
User’s Manual
ECOM-ES24F2G v.1.0
November , 2003
Copyright © ECOM Corp.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents
Per-port bandwidth control................................................................................................. 1
Central Switch management:.............................................................................................. 1
802.1Q tag VLAN ............................................................................................................. 1
VLAN filter ...................................................................................................................... 1
Quality of Service.............................................................................................................. 1
Link aggregation ............................................................................................................... 1
IGMP Snooping ................................................................................................................ 1
Broadcast Storm control..................................................................................................... 2
Loop detection .................................................................................................................. 2
Port setting........................................................................................................................ 2
Authentication Keys .......................................................................................................... 2
What is VLAN?................................................................................................................. 2
What is Priority Queuing?............................................................................................... 3
i
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
AC Power Connector...................................................................................................... 8
5 Steps to Quick Installation........................................................................................... 9
Desktop Installation........................................................................................................ 10
Making your own UTP/STP cable................................................................................ 12
ii
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Gigabit Port LED............................................................................................................ 14
Minimum system requirements..................................................................................... 16
Software........................................................................................................................ 16
Starting the Software...................................................................................................... 17
Status Functions.............................................................................................................. 18
MIB Counter Submenu................................................................................................. 20
Port Status Submenu..................................................................................................... 21
Global Configuration Submenu.................................................................................... 24
VLAN Configuration Submenu.................................................................................... 25
iii
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Security Function............................................................................................................ 29
System menu................................................................................................................. 31
Options menu................................................................................................................ 31
iv
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Figures
Fig. 2-2 Front Panel ....................................................................................................... 7
Fig 2-3 The Reset Button............................................................................................... 7
Fig. 3-2 Attaching the Switch to a 19-inch rack........................................................... 10
v
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Tables
Table 4-1 System & Station Port LEDs........................................................................ 15
vi
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Product Overview
1
Product Overview
Introduction
Windows Remote Management software
Conventionally, configuring a switch's smart management will require users to attach the computer
(serial or printer port) directly to the switch's console port. With ECOM-ES24F2G's in-band
management capability, users can configure the switch through the Ethernet network. The included
Windows management software provides a very simple point-and-click interface to set all the
functions. Users can even backup settings to be restored in the future. Best of all, the management
utility can configure several switches using the same utility.
Management Features
The ECOM-ES24F2G is equipped with many practical management functions.
Per-port bandwidth control
ꢀ
allow limiting the outgoing and incoming bandwidth separately for each port .
Central Switch management:
ꢀ
Configure several switches at the same time.
802.1Q tag VLAN
ꢀ
enables VLAN assignment across different switches.
VLAN filter
ꢀ
provide controls to let single-cast, multi-cast, or broadcast traffic to pass between
VLANs.
Quality of Service
for multimedia applications: the 802.1p compliance provide priority traffic
management based on port, vlan-tag, or TCP/IP TOS information.
ꢀ
Link aggregation
The LACP(Link Aggregation Control Protocol) increase the uplink speed by allowing
ꢀ
several ports(Trunk Group) to link between the switches. The switch allows up to 7
trunk groups in 2 or 4 ports. Please make sure that switches on both side are setup for
the trunking function.
IGMP Snooping
for IP multicast group management
ꢀ
1
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Product Overview
Broadcast Storm control
prevents the broadcast traffic from overflowing the network.
ꢀ
Loop detection
ꢀ
ꢀ
alert the user when there is a loop formed inside the network on the front panel LED.
The management software's diagnostic function even report which ports the loop
occurs.
Port setting
ꢀ
setting port speed and duplex mode, flow control
Authentication Keys
ꢀ
The switch support authentication key feature for the management function. This will
prevent unauthorized users from changing the switch’s settings.
For Detail information on management functions, please refer to Chapter 5 “Management
Software Guide”.
In-Band and Out-of-Band Management
In-Band and Out-of-Band managements are the two distinct methods for switch management.
In-Band management that includes WinSmart, Web, Telnet, and SNMP allows users to configure
the switch through the Ethernet network.
Out-of-Band management means managing the switch outside of the switch’s Ethernet network.
Console Port management is the most common type of out-of-band management. Out-of-Band
management requires the switch to be physically attached to a computer through a RS-232, USB, or
Parallel port.
The ECOM-ES24F2G is equipped with WinSmart In-band management. It uses the unique RRCP
protocol that enables the included Windows utility to manage the switch inside the LAN. However;
since it does not use IP protocol, it cannot be managed remotely from the Internet.
What is VLAN?
Defining VLAN
What is VLAN? Since VLAN solutions and implementations are still very vendor-specific, to define
precisely what VLANs will certainly arouse controversy. Nevertheless, most would agree that a
VLAN can roughly be equated as a broadcast domain. More specifically, VLANs can be seen as a
group of end stations, perhaps on multiple physical LAN segments, which are not constrained by
their physical location and can communicate as if they were on a common LAN.
There are several ways to define VLAN membership: port grouping, frame tagging, MAC-layer
grouping, network-layer grouping, IP multicast grouping, etc. ECOM-ES24F2G utilizes
port-grouping (port-based VLAN) for the implementation of VLAN in your network.
2
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Product Overview
Port-based VLAN
ECOM-ES24F2G Fast Ethernet Switch fulfills the initial VLAN implementation as defining
VLAN membership by groups of switch ports. Port grouping is the most common method of
defining VLAN membership, and its configuration is straightforward. But, when a user moves from
one port to another, it takes a network manager to manually reconfigure VLAN membership.
With manual VLAN configuration, both the initial setup and all subsequent moves and changes are
controlled by the network administrator, enabling a high degree of control. Also moving users
manually with VLANs may actually be easier than moving users across router subnets.
Table Maintenance via Signaling
When an end-station broadcasts its first frame, the switch resolves the end-station’s attached port
with its VLAN membership in cached address tables. As VLAN membership changes, these address
tables can be manually updated by a system administrator at a management console.
802.1q VLAN Standard
In March, 1996, the IEEE 802.1 Internet-working Subcommittee completed the initial phase of
investigation for developing a VLAN standard. The standard, known as 802.1Q, represents a major
milestone in enabling VLANs to be implemented. Since the rapid deployment of LAN switching
from around 1995, the shift toward LAN switching as a replacement for local/departmental routers,
or even shared media devices (hubs) is just accelerating for now.
What is Priority Queuing?
Priority Queuing is a method of ensuring that high priority traffic gets delivered efficiently, even
when during bursts of high traffic load. In this way, traffic such as voice data and video (services
which are streaming) are prioritized, helping steady picture and sound quality.
ECOM-ES24F2G allows 2-level (High/Normal) Priority setting by any of the three types of
priority frames operations: TCP/IP TOS, VLAN tag or per Port priority frame operation.
The QoS setting for priority per port means that all packets received by the port will be priority
frames; ECOM-ES24F2G can also judge the priority of frames by checking the specific bits of
VLAN tag or TCP/IP TOS/DS included in the frame format. ECOM-ES24F2G will judge the
priority of frames by checking the specific bits recorded in the type field of packet format to ensure
the VLAN or TCP/IP TOS/DS status of packets, then set the threshold of VLAN or TCP/IP TOS/DS
to declare the priority of packet.
If you have any plans to implement network telephony or any sort of video conferencing, streaming
video/audio or any real-time applications on your network you will need ECOM-ES24F2G for
priority queuing. Its benefit is to dramatically improve the quality of priority services on the network.
If priority queuing is not implemented then the quality of these services will depend entirely on the
loads on your network. If network traffic is high, the service will not work properly.
3
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Product Overview
Product Features
•
Standard Compliance
•
Smart Remote Managements:
o
o
IEEE 802.3 10Base-T Ethernet
o
o
o
Windows Remote Management
IEEE802.3u 100BaseTX
standard
Software
Configure several switches on
one program
o
o
o
IEEE802.3ab 1000Base-T
standard
Management through Ethernet
network
IEEE 802.3u Nway
auto-negotiation
o
o
Authentication Key function
Bandwidth Control
IEEE802.3x flow control for full
duplex, back-pressure for
half-duplex
ꢁ
ꢁ
Separate Tx and Rx
speed limit control for
each port
o
o
IEEE 802.1p/Q tage VLAN and
QoS
128Kbps, 256Kbps,
512Kbps, 1Mbps,
2Mbps, 4Mbps, 8Mbps
option
IEEE 802.3ad link aggregation
•
Hardware Feature
o
o
24 x 10/100Base-TX Nway ports
o
VLAN
2 x 1000Base-T Copper Gigabit
port
ꢁ
Up to 32 VLAN groups,
up to 24 ports per VLAN
group
o
o
o
o
MPU included
Auto MDI/MDI-X function
Store-and-Forward architecture
Non-blocking wirespeed
switching architecture
8K MAC address
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Port based or 802.1Q
tag VLAN
Ingress rule for ingress
filtering control
o
o
Unicast Inter-VLAN
control
2.5Mbit Embedded memory
Buffer.
ARP Broadcast
Inter-VLAN control
IP Multicast Inter-VLAN
control
o
o
8.8 Gbps Throughput
Shared frame buffer with
starvation control
o
LEDs
o
802.1p Prority: 2-level , Port
Based, IP Based(TOS), VLAN
TAG(TCI)
ꢁ
ꢁ
Power, Loopdetect,
DIAG
Link/ACT, FDX/COL,
4
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Product Overview
100M
o
o
o
o
802.3ad Link Aggregation: 7
Trunk groups in 2 or 4 ports
IGMP Snooping for IP multicast
group management
•
Dimensions: 432 × 180 × 44 mm, 19"
rack mountable
•
•
Weight: 2.7 kg
Broadcast Storm Control to limit
broadcast traffic
Built-in power supply: 100~240 VAC,
50 ~ 60 Hz, 0.4A, 10 Watts max.
Safety/EMI: meet UL, FCC, CE, Korea
EMI standard
Status on bandwidth utilization,
byte count, packet count, MIB
counter
•
o
o
o
Loop detection LED on the front
panel
Diagnostic software detects
Trunking and Loop fault
Port speed, Duplex Mode, Flow
Control
5
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparation before Installation
2
Preparation before Installation
Unpack the Package
Before you begin the installation of ECOM-ES24F2G Fast Ethernet Switch, make sure that you
have all the necessary accessories that come with your package. Follow the steps below to unpack
your package contents:
1. Clear out an adequate space to unpack the package carton.
2. Open the package carton and take out the contents carefully.
3. Put back all the shipping materials such as plastic bag, paddings and linings into the package
carton and save them for future transport need.
After unpacking and taking out the entire package contents, you should check whether you have got
the following items:
⌧
⌧
⌧
⌧
ECOM-ES24F2G Fast Ethernet Switch
One AC power cord
Rack-mounting kit (screws and mounting brackets)
Support CD-ROM (The PDF version of this User’s Manual can be found within)
If any of these above items is missing or damaged, please contact your local dealer for replacement.
6
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparation before Installation
Fig. 2-1 Package Contents
The Front Panel
The front panel is where you can find the twenty-four 10/100Mbps station ports , 2 Gigabit Ports,
and the LED indicators. For the technical specifications of the ports, please refer to Appendix A,
Product Specifications for detailed information. For information concerning LED indicators, please
refer to Chapter 4, LED Indicators.
Gigabit Ports
Station Port LEDs
Station Ports
Power LED
DIAG LED
Fig. 2-2 Front Panel
Reset Button
The ECOM-ES24F2G Features a reset button that can restore the switch settings back to factory’s
default value. Please press this button if your management software have problem detecting the
switch or if the switch is not functioning correctly. The reset button is located near the center of the
back panel.
Fig 2-3 The Reset Button
7
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparation before Installation
The Rear Panel
The rear panel is where you can locate the power switch and AC power connector.
Power Switch
You can turn the power switch on /off to activate/deactivate the Switch. To turn on the Switch, press
the switch to the ON position. To turn off, press the switch to the OFF position.
AC Power Connector
This is a three-pronged power connector where the power cord should be attached. Just plug the
female end of the power cord into the connector, and the male end of the power cord into an AC
power outlet. The switch supports an input voltages ranging from 100 ~ 240 VAC @ 50~60 Hz .
Power Switch
Power Connector
Fig. 2-4 Rear Panel
8
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Installation of the Switch
3
Installation of the Switch
Quick Installation
ECOM-ES24F2G Fast Ethernet Switch is fully compliant with 10/100BASE-TX Fast Ethernet
standards.
5 Steps to Quick Installation
Step 1. Power on the Switch.
Step 2. Connect network devices to the Switch: connect either workstation, server, switch, bridge
or router to the station port (10/100BASE-TX), using 100 ohm unshielded twisted pair (category 5
UTP) or shielded twisted-pair (STP) cable.
Step 3. Install the Management software: Please refer to chapter 5 for detail instruction on how to
install and configure the management software.
Rack Mounting
ECOM-ES24F2G Fast Ethernet Switch can also be mounted on a standard size 19-inch rack, which
can in turn be placed in a wiring closet with other equipments.
Before you can mount the switch on the rack, first you must attach the mounting brackets on both
sides of the switch with screws, and then mount it as a unit on the rack.
To mount the unit on a rack, please follow the steps below:
Step 1.
Step 2.
First, align the holes on the bracket with the holes on both side of the switch.
Insert screws into the holes and then fasten the bracket on one side of the switch with a
screwdriver.
Step 3.
Step 4.
Repeat Step 1 and 2 to fasten the bracket on the other side of the switch.
Mount the unit on the rack and align the notches on both brackets with mounting holes
on the rack, and then secure the unit with suitable screws.
9
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 3-1 Fastening the brackets on the switch
Fig. 3-2 Attaching the Switch to a 19-inch rack
Desktop Installation
ECOM-ES24F2G Fast Ethernet Switch has four rubber pads attached on each corner of its
underside. These pads serve as cushionings against vibration and prevent the switch from sliding off
its position. They also allow adequate ventilation space when you place the switch on top of another
device.
Fig. 3-3 Desktop installation
•
The location you choose to install your switch and the way you configure your network
may greatly affect its performance.
Installation Site Preparation
You can mount ECOM-ES24F2G Fast Ethernet Switch either on desktop or on a 19-inch rack. If
you plan to mount the switch on desktop, please choose a steady, level surface in a well-ventilated
area that is free from excessive dust. In any case, the installation site chosen for your switch has to
comply with the following requirements:
•
The surface where you want to mount the switch must be able to sustain at least 2.7 kg.
10
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Installation of the Switch
•
•
Do not place heavy objects on top of the switch.
The location must preferably be free from excessive dust, away from heat vent, hot-air exhaust
and direct sunlight.
•
The switch should not be placed near large electric motors or other strong electromagnetic
sources. As a reference, the strength of the electromagnetic field on site should not exceed the
(RFC) standards for IEC 801-3, Level 2(3V/M) field strength.
•
•
•
The air temperature in the location should be within a range of 32 to 122 °F (0 to 55°C).
The relative humidity in the location should not exceed 95% non-condensing humidity.
The distance between the RJ-45 port and the standard network interface should not exceed 100
meters.
•
Adequate space should be allowed in front of all the ports, so that each port is easily accessible
for cable connections.
Cabling Guide
For 100BASE-TX and 1000Base-T ports
The 24 10/100Mbps and 2 Gigabit station ports require Cat. 5 twisted-pair UTP/STP cable for
connection. When configuring within the 10/100BASE-TX cabling architecture, the cable distance
should be within 100m.
The following table summarizes the cable requirement for 10/100/1000BASE-T connection:
10BASE-T
100BASE-TX
1000Base-T
100 ohm Category 3, 4, 5 UTP/STP cable
100 ohm Category 5 UTP/STP cable
100 ohm Category 5 UTP/STP cable
Auto MDI/MDI-X function
The SNMP-FSH2402GT is equipped with Auto-MDI/MDI-X function, which allows you to use
straight-thru cable even when connecting to another switch/hub. Simply use the straight-through
cable for all types of 10/100/1000BASE-T connections, either to a PC or to a networking device
such as other hub or switch.
Connection
10 /100Base-TX
Ports
1000Base-T
Ports
Specification
Interface
RJ-45
RJ-45
Cable to Use
To an end station
Straight-through twisted-pair
Straight-through twisted-pair
cable
Straight-through twisted-pair
cable
cable
Straight-through twisted-pair
cable
To a hub/switch
Maximum Distance
100 meters
100 meters
Table 2-2 Cabling type for 10/100BASE-TX and 1000Base-T
11
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Making your own UTP/STP cable
The twisted-pair cable provided an eight-pin plug at each end that mate with the twisted-pair port on
the adapter and with a RJ-45 wall jack. If you are marking your own interface cables to use as
dedicated network wiring or as extension cables, please follow the guideline below:
ꢂ
Each UTP/STP cable contains eight wires in either 568A or
568B color scheme (please see Fig 2-7). The wires are
twisted in pairs to reduce cross talk and various signal
noises.
ꢂ
Each pairs composed of one positive wire and one negative
wire. The positive are marked by stripe color while the
negative are marked by solid color. A pair of wires is
composed of one stripe and one solid wire of the same color.
There are four pairs of wires, they are in group of {1 and 2},
{3 and 6},{4 and 5},{7 and 8}. Please see Fig 2-8 for
diagram.
When making a cable, make sure the correct pairs of wire are
twisted together before inserting into the jack. Incorrect
twisted pair will cause the cable to malfunction or signal
degradation over short distance.
ꢂ
ꢂ
Fig 2-3 Twisted Pair
Color Scheme
ꢂ
ꢂ
ꢂ
A straight-thru cable have jacks on both end following
the same color scheme.
A cross-over cable have jacks on both end following the
opposite color scheme (one 568A and one 568B)
While 10/100Base-TX only use the first 2 pairs of wires
(1+2, 3+6). However, please still make sure all 4 pairs
are twisted and insert into the jack in correct order.
The 1000Base-T Gigabit port use all 4-pairs of wires.
ꢂ
Fig 2-4 Pair Wires
Connecting to Power
ECOM-ES24F2G Fast Ethernet Switch features a universal auto-select power supply unit, which
allows a power connection to a wide range of input voltages from 90 to 240VAC @ 50 ~ 60Hz.
To establish its power connection, simply plug the female end of the power cord into the power
connector on the rear of the switch and the male end of the power cord into a suitable power outlet.
Once you have correctly plugged in the power, you can then turn on the Power Switch to activate the
switch.
12
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
4 LED Indicators
4
LED Indicators
Before connecting any network device to ECOM-ES24F2G Fast Ethernet Switch, you should take
a few minutes to look over this chapter and get familiar with the front panel LED indicators of your
Switch.
System LEDs
10/100Mbps Port LED
Gigabit LED
System LEDs
-
-
Power (green) to indicate power on/off status
LoopDet (yellow) to indicate network loop has formed inside the network. You can
use the management program’s diagnostic function to find out which port the loop
occurs.
-
DIAG (yellow) to indicate the power on self test (POST) fails status, which indicate a
fault chip.
10/100Mbps Port LEDs
For port 1 ~ port 24
- Link/Act (green) to indicate linking status and activity
- FDX/Col (yellow) to indicate Full Duplex transmission mode and collision status
- 100 M LED (red) to indicate 100 Mbps speed
Gigabit Port LED
For port G1 and G2
- Link/Act (green) to indicate linking status and activity
- FDX/Col (yellow) to indicate Full Duplex transmission mode and collision status
- 100/1000M LED: (Green) to indicate 1000 Mbps speed
(Orange) to indicate 100 Mbps speed
14
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
4 LED Indicators
LED Table
LED indicator
Color
Status
Meaning
System LEDs
Power LED
● Green
● Yellow
● Yellow
ON
OFF
Power ON
Power OFF
ON
OFF
Detect a loop even in the network
Loop not detected
LoopDet LED
DIAG LED
ON
OFF
POST has failed
POST is O.K.
10/100Mbps port LED
(Port 1 to 24)
Link/Act
● Green
● Yellow
● Red
ON
Blinking
OFF
Connection is made
Transmitting/Receiving
No connection is made
FDX/Col
100M
ON
Blinking
OFF
Full Duplex
Collision (in half duplex)
Half Duplex
ON
OFF
100Mbps speed
10Mbps speed
Gigabit port LED
(Port G1 and G2)
Link/Act
● Green
● Yellow
ON
Blinking
OFF
Connection is made
Transmitting/Receiving
No connection is made
FDX/Col
1000M
ON
Blinking
OFF
Full Duplex
Collision (in half duplex)
Half Duplex
● Green
● Orange
ON
ON
OFF
1000Mbps speed
100Mbps speed
10Mbps speed
Table 4-1 System & Station Port LEDs
15
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
5
Management Software Guide
Introduction
The ECOM Windows remote management software allows user to configure the management
function though the LAN port. It uses a specialized RRCP protocol and does not use the IP protocol.
It operates inside the Ethernet network.
Important Information
ꢃ
WinPCap application (included in the CD) must be installed before installing the management
software
ꢃ
ꢃ
ꢃ
Please make sure to press the “Update” button after changes
Please make sure to “write to the switch” after change settings
The ECOM-ES24F2G has a factory reset button on the back panel. This button will restore
switch’s setting to factory’s default values.
ꢃ
ꢃ
If your management program can’t find the switch, please press the reset button.
If the application says authentication failure and the authentication key is correct, please press
“edit Switch Database” and clear all entries.
ꢃ
Minimum system requirements
To use Remote Management Application, it is necessary that your system include the following
components:
Hardware
ꢀ
ꢀ
Pentium class processor
32 MB RAM
Software
ꢀ
Windows® 98 (Second Edition for non-English operating systems), WinME, WinNT
4.0 with Service Pack 6, Win2000, or WinXP
WinPCap 3.0 (included in the CD)
ꢀ
16
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Installing the Software
Please follow the procedures below to install the management program into your Windows
1.
Insert the ECOM CD into your computer, the Product CD menu should show up automatically.
If not, on the File Explorer, please click on “setup.exe” to begin.
2.
3.
Click on “ETHER/SNMP Series” and select the “ECOM-ES24F2G”
Follow the instruction on screen to install the “WinPCap” and “The Remote Management
Utility”
4.
After you install Management Application on your computer, an application icon
placed on the desktop.
is
Starting the Software
1.
To start Management Application, go to the desktop and double click on the
icon.
(Or select “Start->Program ->RMT->RMT” from the Start menu)
2.
You can select one network adapter. The adapters are displayed in the combo box.
3.
The program will search for all WinSmart switches on the network and display them. The
utility can configure only one switch at a time, if you have more than one WinSmart switch,
please choose one to configure by pull down the “Selected Switch Mac” field.
Note: If your switch doesn’t show up in the menu. Please reset the switch and press “update
button”.
17
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
There are 4 major functions on the management screen “Status”, “Configuration”, “Security”, and
“Diagnostic”. We will discuss them in the following sections. Please make sure to save to the
hardware after changes.
Status Functions
Click on the Status Tab of the management screen will bring you the overview, port status, and MIB
counter sub menus.
Overview Submenu
18
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Discovered device information:
List all switches founded in the network. You can named the switches by double-click the item in
the list box.
Network topology link vector:
Show the link status of the switches.
Update button
If you want to know the newest switch’s information of the network, press the Update button.
Switch database button
You can view the switch database. The database dialog box displays switch’s name, mac address
and authentication Key.
19
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
MIB Counter Submenu
You can view the MIB counter about the RX, TX and Diagnostic Counter. Click the Diagnostic
Counter column header, there are three object you can select, such as Drop count, CRC error count
and Collision count.
20
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Byte Count Button
You can set the unit of the RX and TC counter to Byte count.
Packet Count Button
You can set the unit of the RX and TC counter to Packet count.
Bandwidth Utilization Button
Displayed the per-port traffic utilization. It will set the TX, RX and Diagnostic Counter to utilization
mode.
About Polling
ꢀ
ꢀ
ꢀ
You can start counter by click the Start button, and click the Stop Button to stop.
Clear Counter button is use to clear all MIB counters, it will reset the counters to 0.
Polling interval button is used to set the time interval for the frequency of queried.
Port Status Submenu
You can view the port status of the switch that you select. The list box will show the status of port1,
port2…,and port26. The port status includes port type, enabled status, link status, speed duplex,
21
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
flow control, Tx bandwidth control, Rx bandwidth control, and trunk setting status.
22
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Configuration Functions
Port Configuration Submenu
Press the “Config” button, and you will see a dialog like follows. Put the check in the item you want
to configure.
23
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Select ports to config:
Please select a port to set settings
Port Enable:
The default is to enable the port. Check the “Disable” if you want to disconnect the port
Tx Bandwidth Control
Enable this function will restrict the given port’s sending speed to the selected value.
Rx Bandwidth Control
Enable this function will restrict the give port’s receiving speed to the selected value
Speed Advertised
Changing the speed and duplex mode of a given port.
Global Configuration Submenu
Global Configuration is used to configure the global port control registers. Press the Refresh button
to read the status of the registers. Press the Update button to set the registers as shown in this frame.
24
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Qos Configuration Submenu
Qos Configuration is used to configure the Qos control registers. Press the Refresh button to read the
status of the registers. Press the Update button to set the registers.
VLAN Configuration Submenu
This page is used to configure the vlan table registers.
25
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Refresh button
Read the VLAN table registers. If you can have configured VLAN but it doesn’t show on the table,
please press the button
Add VLAN button
Click the ADD VLAN button will pop up a configuration window below. Select port base or tag
base VLAN, then check the port where you want to configure the settings. For Tag Base VLAN,
please enter a VLAN ID number.
Port Tagging Control button
Press this button you will see a dialog like follows. To configure a port, please double-click the port
you want to configure.
26
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Please make sure to “Save VLAN” after configuration. If the VLAN settings is wrong, it can cause
user not enable to enter the switch’s management. In this case, simply reset the switch to factory’s
default.
Vlan Control Submenu
Setting VLAN Control Registers.
Press the Refresh button to read the vlan control registers. Press the Update button to set the registers,
and it will set all vlan control registers to the selection.
27
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Device Feature
Setting IGMP Snooping Control register and IP Multicast Router Port Discovery register. Router
port report will show the IP multicast Router port list. Press the Refresh button to read the register.
Press the Update button to set the registers, and it will set the register to the selection.
28
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Security Function
This page displays the authentication key of the switch, and the RCP Management Security Mask
Configuration. The authentication key is readable in this version. You can press the Refresh button
to read the register.
29
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Diagnostic Function
Fault Information
Show some information likes Trunk Port Fault, Network Loop Fault Test, and Gigabit PHY
existence report for Gigabit Port G1G2.
Device Reset
The software reset will reset the system to the initial state. The MAC table and VLAN table data will
be kept. All the current user configured values of internal registers will be kept. The EEPROM
download will NOT be done again. But the system will restart the process of Auto Negotiation . The
hardware reset will reset all the system at a initial state like the process of power on hardware reset.
30
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Management Software Guide
Pull down Menus
There are totally of 4 pull down menus at the top of the screen. We will explain the function of each
one.
System menu
Save and Load Configuration
You can save or load the configuration to a file.
To save a file, do one of the following:
In the menu, click System | Save Configuration .
Note: The configuration file are named by the switch’s MAC address.
To load a file, do one of the following:
In the menu, click System | Load Configuration .
In the Open File dialog box, select a “.rrcp” file and click Load.
In the Setting Active Switch dialog box, select a switch you want to set, and click OK.
Options menu
Hello polling
The Management Application send hello packet to switches in the network, and this function is used
to set the generation interval of hello control frame. To reduce unnecessary control frame traffic, a
value of 2 seconds is recommended.
Counter polling
The Management Application send packet to read the counter registers, and this function is used to
set the generation interval of these packets. To reduce unnecessary control frame traffic, a value of 6
seconds is recommended.
efficiency.
Auto Detect and Reload
This function allows the program to automatically load the configuration file from the PC and
restore to the switch. . Please check the “load application file automatically” to activate. The use of
this function is not recommended for the switch as its settings are kept inside the switch’s
non-volatile flash memory.
31
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A Production Specifications
ECOM-ES24F2G Fast Ethernet Switch
Appendix A Product Specifications
• Standard Compliance
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.1q VLAN standard
IEEE 802.1p Class of Service
IEEE 802.1ad Link Aggregation
ANSI/IEEE Std 802.3 NWay auto-negotiation
• Topology
Star
• Port Configuration
ꢁ
ꢁ
ꢁ
24 × 10/100 BASE-TX Port
2 x 1000Base-T ports
Auto MDI/MDI-X
• Data Rate
ꢁ
ꢁ
ꢁ
10BASE-T Ethernet
10 Megabits/sec (half-duplex)
20 Megabits/sec (full-duplex)
100BASE-TX Fast Ethernet
100 Megabits/sec (half-duplex)
200 Megabits/sec (full-duplex)
1000BASE-T Gigabit Ethernet
2000 Megabits/sec (full-duplex)
•
•
Trunking: up to 7 trunk groups in 2, 4, or 8 port group
VLAN
ꢁ
ꢁ
ꢁ
Port Based
802.1p Tagged VLAN
VLAN filtering rules
• Priority (QoS) Types
ꢁ
ꢁ
ꢁ
VLAN based
TCP/IP TOS
Per Port
• Priority Level
2-level: High/Low
32
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A Product Specifications
Store and Forward
Auto-negotiation
• Transmission method
• Full Duplex
• Active Flow Control
ꢁ
ꢁ
IEEE 802.3x compliant flow control for full duplex
Back Pressure for half duplex
• Filtering Address Table
• RAM Buffer
8 K per device
2.5 Mbits
• MAC Address Learning
Automatic update
• Cabling Type
ꢁ
ꢁ
10BASE-T: 4-pair 100 ohm Category 3,4,5 UTP (100 m) cable
100BASE-TX: 4-pair 100 ohm Category 5 UTP/STP (100 m) cable
• LED layout
ꢁ
System LEDs
Power LED
DIAG LED
ꢁ
Station port LEDs for port 1 ~ 24
Link/Act LEDs
FDX/Col LEDs
100M LEDs
• Dimensions
• Net Weight
• Power Input
432 × 179 × 44 m/m.
2.7 kg
Internal universal power supply,
100~240 VAC, 50~60 Hz, 1.0A
• Power Output
20 Watts max, @ 100 ~ 240 VAC
32 ~ 122 °F / 0 ~ 50 °C
• Operating Temperature
• Storage Temperature
• Humidity
- 40 ~ 149°F / -40 ~ 65 °C
< 95% (non-condensing)
•
Safety / EMI Certificates
UL, TUV, VDE, FCC Class A, CE
33
ECOM ES24F2G the Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B Troubleshooting
This appendix contains specific information to help you identify and solve problems.
If your switch does not function properly, please make sure it is set up according to
the instructions on the manual.
If you suspect your switch is not connected correctly to your network, check the
following points before you contact your local dealer for support.
•
•
•
Make sure the Power is ON (Check the Power LED).
Make sure the cable is connected properly on both ends.
Make sure that the maximum cable length between switch and end node
does not exceed 100 meters (for 10/100/1000BASE-T connection).
Make sure that the maximum switch-to-hub/switch cable distance does not
exceed 100 meters (for 10/100/1000BASE-T connection).
Verify that the cabling type used is correct.
Check the corresponding Link/Act, FDX/Col, 100M, 1000M for signs of
faulty connection. Check the status of the cable attachment. If the problem
persists, try a different cable.
•
•
•
•
•
Try another port on the Switch.
Turn off power supply to the Switch. After a while, turn it on again to see if
it resumes to its normal function.
•
If you find out where the problem is but cannot solve it by yourself, or you
simply cannot locate what is at fault, please contact your local dealer for
technical support.
34
Ecom ES24F2G Gigabit Ethernet Switch User’s Manual V1.0
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Edelbrock Automobile Parts 15012 User Manual
Euro Pro Vacuum Cleaner XSC410 User Manual
Fender Speaker 1211 MK III User Manual
Fostex Printer VF 08 User Manual
Frymaster Electric Pressure Cooker 8BC User Manual
GarrettCom Switch Magnum 3000 User Manual
Gateway Server E 9425R User Manual
GE Coffeemaker 1549887 User Manual
GE IP Phone 25600 MGCP User Manual
Gitzo Camcorder Accessories GT2942L User Manual