SPECIFICATIONS MQ1394e
FEATURES
• Dedicated horn loaded MF/ HF array module
• 10-in MF w/ Radial Phase Plug™; 2-in exit
Neodymium HF
• 90° x 40° beamwidth
• Vertically configured to create horizontal arrays
DESCRIPTION
A dedicated mid/ high system in a vented trapezoidal enclo-
sure. Includes a horn-loaded 10-in MF cone with Radial Phase
Plug™ and a 2-in exit/ 3-in diaphragm Neodymium compres-
sion driver. The MF and HF horns provide a nominal 90° x 40°
beamwidth. An internal passive crossover with jumpers on the
input panel allows user selection of either bi-amplified or
passive operation. In either case digital signal processing is
required to achieve specified performance. The enclosure
features a comprehensive system of 3/ 8”-16 threaded sus-
pension points.
Calculated Maximum Output (dB SPL)
Passive Peak140
APPLICATION
The MQ1394e employs a no-compromise design where the mid
and high frequency horns are truly large enough to provide
optimal pattern control throughout each passband. The horns
feature a rigid but well-damped construction using wood
veneer backed by structural foam. The MQ1394e has been
designed to work with a complementary MQ1300 Series LF
loudspeaker to create a full-range audio system, but may also
be used without a LF complement for voice-only applications.
The enclosure is vertically configured for arraying in horizon-
tal rows. Horizontal arrays are typically used in venues, such
as houses of worship, where the array must address wide, fan-
shaped audiences.
MF Peak 144
HF Peak 137
Passive Long Term 134
MF Long Term 138
HF Long Term 131
Nominal Coverage Angle/ -6 dB points (degrees)
Horizontal 90
Vertical 40
Recommended High-Pass Frequency
24 dB/ Octave 200 Hz
PHYSICAL
Application Usage: Install
Configuration Mid/ High
Powering Passive or Bi-amplified
MF Subsystem 1 x 10-in horn-loaded cone,
Radial Phase Plug™
HF Subsystem 1x 2-in exit/ 3-in voice coil com-
pression driver on constant
Houses of Worship
Theatres
Auditoriums
Arenas
Stadiums
Performing Arts Centers
PERFORMANCE
Frequency Response (1 W @ 1m)
directivity horn
Enclosure Materials Exterior grade Baltic birch plywood
±3 dB 250 Hz to 15 kHz
-10 dB 200 Hz
Finish Wear resistant textured black paint
Connectors Terminal barrier strip
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
Suspension Hardware 16x 3/ 8"-16 threaded mounting
suspension points (4 each top,
Passive 109
MF 112
bottom and sides)
Grille Powder coated perforated steel
HF 109
Dimensions
inches
Height 40.00
millimeters
1016
Impedance (Ohms)
Passive
MF
8
8
8
Width (front) 32.00
Width (rear) 8.12
Depth 25.61
813
206
650
HF
Power Handling, AES Standard (Watts)
Trapezoid Angle 25° per side
pounds
Passive 325
MF 400
Weights
kilograms
67.3
Net Weight 148
HF 150
Shipping Weight 156
70.9
One Main St reet , Whit insville, MA 01588
EAW products are continually improved. All specifications are therefore subject to change without notice.
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
MQ1394e/ 0002680/ 2 pp April 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
info@eaw.com
www.eaw.com
Printed in USA
|