8
DX-TVM111
Installation instructions
STEP 4 - Select screws, washers, and spacers
1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting
hardware included. (If there are screws that came with the TV, they are almost always in the holes on the back
of the TV.)
Select one of the following types of screws:
M4 × 12 mm screws (C) for a flat back TV.
M4 × 30 mm screws (D) for an irregular or obstructed TV back.
For an irregular or obstructed TV back, use the following spacers:
Universal spacers (F)
CAUTION: To avoid potential personal injuries and
property damage, make sure that there are adequate threads
to secure the brackets to your TV. If you encounter resistance,
stop immediately and contact customer service. Use the
shortest screw and spacer combination to accommodate your
TV. Using hardware that is too long may damage your TV.
However, using a screw that is too short may cause your TV to
fall from the mount.
Screw fits
correctly
Screw is
too long
Screw is
too short
2 Remove the screws.
3 For a flat back TV, go to “STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back“ on
page 9.
-OR-
For an irregular or obstructed back, go to “STEP 5 - Option 2: Attaching the mounting hardware to TVs with
irregular or obstructed backs” on page 10.
Download from Www.Somanuals.com. All Manuals Search And Download.
