1700W RO
COLLECT
MOWER
RC1700
INSTRUCTION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Description of symbols
Your new GMC power tool will more than satisfy
your expectations. It has been manufactured under
stringent GMC Quality Standards to meet superior
performance criteria.
The rating plate on your tool may show symbols.
These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years
of dependable service.
Double insulated for additional protection.
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Conforms to relevant standards
for electromagnetic compatibility.
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Specifications
Specifications
Voltage:
230–240V ~ 50 Hz
1700W
Motor power:
4500min-1
Environmental protection
No-load speed:
Recycle unwanted materials instead
of disposing of them as waste. All tools,
hoses and packaging should be sorted,
taken to the local recycling centre and
disposed of in an environmentally safe way.
Cutting width (swathe):
Cutting heights:
With blue spacer in place:
Ø36cm (14")
5 (16mm, 25mm, 35mm,
45mm and 60mm)
With blue spacer removed: 5 (22mm, 31mm, 41mm,
51mm and 66mm)
Grass box capacity:
Approximate weight:
Sound pressure level:
34 litres
16 kg
83 dB(A)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Personal safety
General safety rules
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
WARNING. Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term “power tool” in all of the
warnings listed below refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
Save these instructions
1. Work area
b. Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c. Avoid accidental starting. Ensure the switch is in the
off position before plugging in. Carrying power tools with
your finger on the switch or plugging in power tools that
have the switch on invites accidents.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause you to
lose control.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
prevent overheating and loss of mower efficiency. When
tidying away the cable, wind it carefully to avoid kinking.
c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
WARNING. After switching off the machine, the cutting
blade continues to rotate for a few more seconds.
d. Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Frequently inspect the condition of the cutting blades.
Damaged blades must be replaced immediately. Blunt
blades should be sharpened. Follow all the required
precautions when replacing the blades.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Before use check the supply and extension cord
for signs of damage or ageing. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
• Do not use the appliance if the cord is damaged or
worn.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
• Read the instructions carefully. Be familiar with the
controls and proper use of the equipment.
g. Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work to be performed. Use of the power tool for
operations different from those intended could result in a
hazardous situation.
• Keep extension cord away from cutting blades.
• Wear eye and ear protection. Wear dust protection if the
mowing action causes the raising of dust or particles.
Wear long trousers.
• Never allow children, infirm people or people unfamiliar
with these instructions to use the rotary collect mower.
• Avoid using the mower, while people, especially
children and the infirm, or pets are nearby.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
• Use the mower only in daylight or good artificial light.
• Do not operate the mower unless the grass box is in
place.
Additional safety rules for lawn mowers
• Only use this Lawn Mower when a Residual Current
Device (RCD) with a tripping current of not more than
30mA is in the circuit.
• Never operate the mower with a damaged base.
• Never operate the appliance with defective guards
or shields, or without safety devices, for example
deflectors and/or grass catcher, in place.
• If an extension cord is used make sure it is for outdoor
use and marked as such. The recommended size of
extension cord is not lighter than 1.5mm2 at 30 metres
in length or 1.0mm2 at 20 metres in length.
• When starting up and when the machine is in operation,
keep the cutting section away from all parts of the body,
especially the hands and feet.
• Do not start the machine when it is not in the operating
• Completely uncoil your extension cable before use to
5
Download from Www.Somanuals.com. All Manuals Search And Download.
position.
• Always stop the mower and switch off at the mains
when cutting is delayed, emptying the grass box or
when walking from one cutting location to another.
• Thoroughly inspect the mower for loose or damaged
parts before each use. Visually inspect to see that
blades, blade bolts and the cutter assembly are not
worn or damaged. Do not use the unit until adjustments
or repairs are made.
• Do not cross roads or gravel paths with the machine
still running.
• Do not move the machine by pulling on the electrical
cable. Always use the handgrip.
• Use only the manufacturer’s recommended replacement
parts and accessories.
• Keep a balanced and stable stance while using the
machine.
• Always disconnect the mower from the mains when
leaving it unattended.
• Ensure that the area being cut is free from stones,
sticks, wires, bones, and other foreign objects. Remove
any objects that could be thrown during cutting or could
wind around the cutting mechanism.
• Switch the motor off and pull out the plug when the
machine is not being used, being cleaned, being moved
from one place to another or when the blades are being
changed or adjusted.
• If you hit or become entangled with a foreign object,
or the appliance starts to vibrate abnormally, stop the
motor and disconnect from the mains immediately to
check for damage. Repair any damage before further
operation is attempted. Do not operate the mower with
loose or damaged parts.
• If there is an interruption to the power supply or the
extension cable is damaged, switch off the machine
immediately and remove the plug from the power point.
• Inspect and maintain the mower regularly. Have the
mower repaired only by an authorised repairer.
• Do not cut against hard objects. This could cause injury
to the operator and damage to the machine.
• If power cord is damaged, only have it repaired or
replaced by an authorised service centre.
• Keep your hands, face and feet away from all moving
parts.
• Check that all grass cuttings and dirt have been
removed from the ventilation vents.
• If possible, avoid cutting wet grass.
• When not in use, store the mower out of the reach of
children and infirm people.
• Exercise proper caution when mowing on sloping
ground. Watch your footing and wear non-slip footwear.
Mow along the slope not up and down it. Do not mow
on steep slopes. Be especially cautious when changing
direction on slopes – stand above the mower to avoid
risk of injury.
WARNING. In order to reduce the risk, disconnect the
plug from the supply power, only use recommended
accessories as required, otherwise personal injury may
result.
• Do not use the machine to cut grass which is not on
the ground. For example, do not cut grass which is on
rocks.
• Never operate the mower barefoot or when wearing
open sandals or canvas shoes.
• Do not mow by pulling the machine towards you.
• Do not switch on the machine in enclosed or poorly
ventilated spaces or in the presence of inflammable
and/or explosive substances such as liquids, gasses
and powders.
• When mowing, keep the cable away from the mower.
Your direction of work should be away from the power
point. Mow in straight lines, not in circles.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Always keep hands and feet away from rotating parts.
Keep clear of the discharge opening at all times.
Failure to follow operating instructions and safety precautions
in this instruction manual can result in serious injury. Read the
manual before starting or operating this unit.
• Never pick up or carry an appliance while the motor is
running.
Wear eye protection
• When the machine is not in use, store it in a dry, and
high or locked-up place, out of reach of children.
Wear hearing protection
Wear respiratory protection
• Check the grass catcher frequently for wear or
deterioration.
WARNING. Before connecting a tool to a power source
(mains switch power point receptacle, outlet, etc.) be sure
that the voltage supply is the same as that specified on
the nameplate of the tool. A power source with a voltage
greater than that specified for the tool can result in serious
injury to the user, as well as damage to the tool.
• After use, disconnect the machine from the power
supply and check for damage. If you have the slightest
doubts, check with an authorised service centre.
• Only use the machine according to the instructions
given in this manual.
If in doubt, do not plug in the tool. Using a power source
with a voltage less than the nameplate rating is harmful to
the motor.
• Check regularly that the nuts, bolts, screws and other
fittings are tight and secure.
• Keep the mower free of grass, leaves and other debris
build-up.
Unpacking
Due to modern mass production techniques, it is unlikely
that your power tool is faulty or that a part is missing. If
you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
• Do not tilt the appliance when switching on the motor,
except if the appliance has to be tilted for starting. In
this case, do not tilt it more than is absolutely necessary
and lift only the part which is away form the operator.
Always ensure that both hands are in the operating
position before returning the appliance to the ground.
The mower is supplied partially disassembled.
The parts in the carton are:
• Do not try to repair the machine or access internal
parts. Use authorised service centres only.
• Mower body (with blade fitted)
• Upper handle (including switchbox, motor on/off grips,
handle joints with twist locks and motor cable saddle clip)
• Do not get distracted and always concentrate on what
you are doing. Use common sense. Never operate the
machine when you are tired, sick or under the influence
of alcohol or other drugs.
• Lower handle (including cable tidy, motor cable saddle
clip and blade spanner)
• Grass box
• Disconnect the unit from the power supply when not in
use, before servicing and when changing the blades.
• 2 wing knobs and 2 lower handle fixing clips
• Keep these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone
this unit, also loan them these instructions.
CAUTION. Never carry out any assembly operations or
adjustments with the power connected to the mower.
Always ensure that the power button is in the off position
and that the power plug is disconnected from the supply.
• The operator or user is responsible for accidents or
hazards occurring to other people or their property.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Know your product
3
Before using the Rotary Collect Mower, familiarize yourself
with all the operating features and safety requirements.
5
1
6
Use the tool only for the applications intended. All other
applications are expressly ruled out.
12
1. Upper handle
8
2. Power button
7
3. Power on indicator
4. Motor on/off grip (x 2)
9
11
10
5. Power cable
6. Motor cable
7. Handle joint (x 2)
8. Handle twist lock (x 2)
9. Wing knob (x 2)
10. Power cable tidy
11. Blade spanner
12. Motor cable saddle clip (x 2)
13. Hinged cover
14
17
13
19
16
15
14. Cover latch
15. Mower body
20
18
16. Height adjustment lever
17. Lower handle
18. Lower handle fixing clip (x 2)
19. Grass box
20. Wheel (x 4)
21
21. Front handle
4
3
2
27 26
24 25
22 23
22. Blade
23. Blade bolt
24. Blade height spacer (blue)
25. Blade height spacer (yellow)
26. Filter cover
27. Filter
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The blue spacer can be removed to increase the
incremental cutting heights by an extra 6mm at all
5 settings of the height
Setting up
CAUTION. Never carry out any assembly operations or
adjustments with the power connected to the mower. Always
ensure that the power button is in the off position and that
the power plug is disconnected from the supply.
adjustment lever (16). The
mower must not be operated
without the yellow spacer (25)
in position under the blade.
Instructions on how to remove
the blue spacer are given in
the section on changing the
mower blade.
CAUTION. Keep the two arms of the upper handle (1)
parallel and insert them into the handle joints, both at the
same time. If you insert one arm and then the other, you
may damage the joints. When removing the handle, keep
the arms parallel and remove both arms at the same time.
Ensure that each arm of the upper handle (1) is properly
seated in the handle joints (7) as follows:
1. Ensure that the handle is in the correct orientation i.e.
the cable tidy (10) must be on the uppermost side of the
lower handle (17) as shown on
the main photograph. Fit the
two tubes of the lower handle
(17) into the slots in the mower
body (15).
1. Loosen the two handle twist
locks (8).
2. Keeping the two arms of the
upper handle parallel, make
sure that the upper handle
(1) is fully inserted into the
handle joints (7).
2. Fix the ends of the lower
handle in position with the two
lower handle fixing clips (18).
3. Using the two saddle clips
(12), secure the black-coloured
motor cable (6) to the upper
handle (1) and lower handle
(17).
3. Retighten the two handle
twist locks (8) turning them
clockwise.
Note. Make sure that the
4. Fit the handle joints (7) of the
upper handle (1) over the die-
cast ends of the lower handle
(17) and secure them together
with the wing knobs (9).
switchbox is facing upwards.
Note. There are two spacers under the blade, one
coloured blue (24) and one coloured yellow (25).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE CUTTING HEIGHT
CAUTION. Never carry out
any assembly operations or
adjustments with the power
connected to the mower. Always
ensure that the power button is
in the off position and that the
power plug is disconnected from
the supply.
HEIGHT ADJUSTMENT WITH BLUE SPACER REMOVED
Lever position Cutting height
1
2
3
4
5
22 mm
31 mm
41 mm
51 mm
66 mm
Replace the grass box (19).
1. Choose a level area with a
firm surface, press the cover
latch (14), lift the cover (13)
and remove the grass box
(19).
BEFORE STARTING
ATTENTION. Due to the power input of this product on
start up, voltage drops may occur and this can influence
other equipment (e.g. dimming lights). So for technical
reasons we advise, if the mains-impedance is Zmax<0.444
Ohm, these disturbances are not expected. If you require
further clarification, you may contact your local power
supply authority.
2. Pull the height adjustment
lever (16) towards you
then move it to the right to
increase the cutting height
or to the left to decrease the
cutting height.
1. Before use, check that the mower is in good working order.
2. Ensure the power button is in the off position and
disconnect the cable plug from the mains supply.
3. Release the lever to lock it in
one of the five stop positions.
3. Examine the general condition of the mower. Inspect
the body underneath the cover, blade, switch, power
cord and extension cord (if used).
Note. There is a blue spacer
(24) located under the blade. It
can be removed to increase the
incremental cutting heights by
an extra 6mm at all 5 settings of
the height adjustment lever (16).
4. Check for loose screws, misalignment, binding of moving
parts, improper mounting, broken parts and any other
condition that may affect its safe operation. If abnormal
noise or vibration occurs during operation, turn the
mower off immediately and have the problem corrected.
Instructions on how to remove this spacer are given in
CHANGING THE MOWER BLADE on Page 12.
5. Do not use a damaged tool and attach a label “DO NOT
USE” to the tool.
HEIGHT ADJUSTMENT WITH BLUE SPACER IN POSITION
Lever position Cutting height
6. Ensure that you are on a flat surface and have secure
footing.Check that the upper handle (1) is in line with
the lower handle (17) and that the wing knobs (9) are
securely tightened.
1
2
3
4
5
16 mm
25 mm
35 mm
45 mm
60 mm
WARNING. Do not operate the mower unless the grass
box is in place.
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
EMERGENCY STOP
1. To stop the motor in an emergency, simply release the
pressure on both motor on/off grips.
2. Keep your hands on the upper handle in order to
control the mower.
3. Allow the motor to stop completely before releasing
control of the handle.
SWITCHING ON AND OFF
IMPORTANT. Practise switching on and switching off the
mower as detailed below before using it to cut grass for
the first time.
1. Wheel the mower to a hard, level surface (such as a
driveway) that is free of debris.
2. Form a loop in the extension cord and insert the loop
through the rectangular slot in the underside of the switch
box. Twist the loop through 180° and place the loop over
the moulded hook then pull tight to secure the cable.
Connect the power cable (5) to the extension lead and
it, in turn to the power point.
MOWING
WARNING. Only use this mower when a Residual Current
Device (RCD) with a tripping current of not more than
30mA is in the circuit.
Note:
Note. The power on indicator
(3) lights showing that power is
connected.
• Cut grass when it is dry.
• Keep the mower blade sharp and balanced.
3. Squeeze one of the motor
on/off grips (4) towards the
upper handle (1) and use the
other hand to press the power
button (2). The power button
remains depressed as long
as the pressure is maintained
on the motor on/off grip (4).
• Do not set the cutting height too low, especially at the
beginning of the mowing season.
• Vary the cutting pattern with each mowing.
• Use the cable restraint to secure the extension cable
in order to prevent any pulling forces on the cable from
disconnecting the power cable or being transmitted to
the switch box.
4. Transfer the other hand to
squeeze the second motor
on/off grip (4).
5. As the motor picks up speed
you are ready to begin mowing.
• Make sure that the work area is free of rocks, debris,
string or cord and other foreign objects.
• Where possible, start the mower before approaching the
grass to be cut.
• Cut the grass by moving in a straight line and proceed slowly.
6. To stop the motor, release
pressure on both motor on/off
grips (4) until the power
button (2) clicks off.
Note. The motor is not started
if pressure is re-applied to the
motor on/off grips (4) alone. It is
necessary to squeeze a motor on/
off grip (4) and re-press the power
button (2) to re-start the motor.
• Start cutting nearest the mains power source and work
away from it to make it easier to avoid the cable.
• At the edge of the lawn, take care to maintain the mower
parallel with the ground to prevent “scalping” of the grass.
• Do not cut damp or wet grass.
• Do not overload the mower.
After finishing the cutting operation, release pressure on
both motor on/off grips (4) and allow the motor to come to
a complete standstill.
Remove the cable plug from the mains supply.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Put on a pair of sturdy gloves
to protect your hands. Block
the rotation of the blade (22)
and use the blade spanner
(11) to unscrew the blade
bolt (23) in an anti-clockwise
direction (viewed from
EMPTYING THE GRASS BOX
1. As the grass collection box
(19) fills with grass, it is
clearly visible through the
translucent material of the
box.
2. Ensure the power button
(2) is in the off position and
disconnect the power cable
plug from the power point.
underneath).
4. Remove the blade bolt (23)
and blade (22) taking care not
to disturb any blade height
spacers (24 and 25) that
might be fitted.
3. Ensure that you are on a
flat surface and have secure
footing.
Note: The blue spacer (24) can
be removed to increase the
incremental cutting heights by
an extra 6mm at all 5 settings of
the height adjustment lever (16).
4. Press the cover latch (14)
and lift the hinged cover (13).
5. Lift out the grass box (19),
empty it, replace it and close
the hinged cover (13).
CHANGING THE MOWER BLADE
CAUTION. Never carry out any assembly operations or
adjustments with the power connected to the mower.
Always ensure that the power button is in the off position
and that the power plug is disconnected from the supply.
1. Periodically check the blade (22) for nicks and dull
cutting edges and have it sharpened if needed.
Note: The blade should be sharpened and balanced by
an authorised repair centre. If there are rounded or broken
ends, thinned metal or other damage, replace the blade.
5. The mower must not be operated without the yellow
spacer (25) in position under the blade.
6. Check that the blade height
spacers (24 and 25) are
properly located, add the
replacement blade (22) and
screw in the blade bolt (23),
tightening it with the blade
spanner (11).
2. With the power button (2)
in the off position and the
power plug removed from the
supply, take out the grass box
(19) and turn the mower on
its side.
7. Return the blade spanner (11)
to its storage position in the
cable tidy (10).
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
8. Press down on the blade spanner (11) to lock it in
position under the retaining latch.
MAINTENANCE
WARNING. Always ensure that the tool is switched off and
the plug is removed from the power point before making
any adjustments or maintenance procedures.
9. Return the mower to the upright position and replace
the grass box (19).
10. Reconnect the power cable to the supply and run
the mower for a few minutes to check that the blade
is properly fitted and that there is no undue noise or
vibration.
1. Regularly check that all the
fixing screws are tight. They
may vibrate loose over time.
2. In order to take up less space
when storing the mower,
loosen both wing knobs (9)
and fold the upper handle (1)
over the lower handle (17).
11. Use only the blade as recommended by the
manufacturer.
CLEANING THE FILTER
1. To help maintain good
airflow within the grass box
and thus ensure optimum
filling, regularly check and,
if necessary, clean the filter
(27).
3. When not in use, keep the
cord wrapped around the
cable tidy.
4. Keep the tool’s air vents
accessible when the cover
(13) is raised, unclogged and
clean at all times.
2. Access the filter by using a
flat blade screwdriver to prise
off the filter cover (26).
5. Remove dust and dirt
regularly.
3. Take out the filter, wash it in
warm, soapy water, rinse it
and allow it to dry.
6. Clean inside the mower body and under the deck. Use
a brush or damp rag.
4. Clean out the filter area and
replace the filter and the filter
cover (26).
7. At the end of the season, give the mower an overall
cleaning and a thorough check, including the blade.
Have the blade sharpened or replaced if necessary.
8. You can clean out the grass box with a hose or
pressure cleaner provided that you first remove it from
the mower. Replace the grass box when it is dry.
9. Do not let water come into contact with the motor.
10. Never use chemicals such as petrol or solvents to
clean plastic parts.
11. Never disassemble the tool or carry out any repairs.
12. Always have the mower maintained or repaired by a
competent person at an authorised service centre.
Note:
This filter is a consumable item and not a warranty item.
Download from Www.Somanuals.co1m3. All Manuals Search And Download.
CLEANING
1. Keep the tool’s air vents unclogged and clean at all
times.
2. Remove dust and dirt regularly. Cleaning is best done
with a rag.
3. Re-lubricate all moving parts at regular intervals.
4. Never use caustic agents to clean plastic parts.
CAUTION. Do not use cleaning agents to clean the plastic
parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with
the tool.
POWER CORD MAINTENANCE
If the supply cord needs replacing, the task must be
carried out by the manufacturer, the manufacturer’s agent,
or an authorised service centre in order to avoid a safety
hazard.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
Download from Www.Somanuals.co1m5. All Manuals Search And Download.
GMC customer assist
If your product needs repairing, replacing,
technical service or you simply need help or advice,
please contact us on our Customer Assist Line
1300 880 001 (Australia) or 0800 445 721 (New Zealand).
For prompt service we suggest you log your service request
access to the Internet, please contact our service department
on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).
7am –7pm, 7days a week (AEST).
Please note that if repair or replacement is required,
you must provide a valid original purchase receipt.
You will need the following details at hand to log your service request;
Personal details: First & Last name, address, pick up address,
contact phone numbers, email address
Product details: Product number, date of purchase, retailer bought from,
State & postcode, receipt number, reason for the request,
copy of official purchase receipt
Attach your purchase receipt and save with this Manual for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
|