|
GS-SR125EDL
Rack Mount Server
User’s Manual
Dual XeonTM Processor Motherboard / Server Solution
Rev. 1001
25A08-05EDL-C00
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Content
Cache Memory ......................................................................................... 41
I/O Device Configuration ............................................................................. 43
Console Redirection ................................................................................... 45
Security..................................................................................................................48
Boot ........................................................................................................................50
Exit ..........................................................................................................................51
Chapter 6 Appendix........................................................................53
6-1: Acronyms .......................................................................................... 53
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Safety, Care and Regulatory Information
L Important safety information
Read and follow all instructions marked on the product and in the documentation before you operate
your system. Retain all safety and operating instructions for future use.
* The product should be operated only from the type of power source indicated on the rating label.
* If your computer has a voltage selector switch, make sure that the switch is in the proper position for
your area. The voltage selector switch is set at the factory to the correct voltage.
* The plug-socket combination must be accessible atall times because itserves as the main disconnect-
ing device.
* All product shipped with a three-wire electrical grounding-type plug only fits into a grounding-type power
outlet. This is a safety feature. The equipment grounding should be in accordance with local and national
electrical codes. The equipment operates safely when itis used in accordance with its marked electrical
ratings and product usage instructions
* Do not use this product near water or a heat source.
* Set up the product on a stable work surface or so as to ensure stability of the system.
* Openings in the case are provided for ventilation. Do notblock or coverthese openings. Make sure you
provide adequate space around the system for ventilation when you set up your work area. Never insert
objects of any kind into the ventilation openings.
* To av oid electrical shock, always unplug all power cables and modem cables from the wall outlets
before removing covers.
* Allow the product to cool before removing covers or touching internal components.
L Precaution for Product with Laser Devices
Observe the following precautions for laser devices:
* Donot open the CD-ROM drive, make adjustments, or perform procedures on a laser device other than
those specified in the product's documentation.
* Only authorized service technicians should repair laser devices.
L Precaution for Product with Modems, Telecommunications, ot Local Area
Network Options
Observe the following guidelines when working with options:
* Do not connector use a modem or telephone during a lightning storm. There may be a risk of electrical
shock from lightning.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
* To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.
* Do not plug a modem or telephone cable into the network interface controller (NIC) receptacle.
* Disconnect the modem cable before opening a product enclosure, touching or installing internal
components, or touching an uninsulated modem cable or jack.
* Do not use a telephone line to report a gas leak while you are in the vicinity of the leak.
L Federal Communications Commission (FCC) Statement
Note: Thisequipmenthas been tested and found to comply with the limits for a Class B digital device,
pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference w hen the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission
limits. Neither the provider nor the manufacturer are responsible for any radio or television interference
caused by using other than recommended cables and connectors or by unauthorized changes or
modifications to this equipment. Unauthorized changes or modifications could void the user's authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference receiv ed, including interference that may cause undesired
operation.
L FCC part 68 (applicable to products fitted with USA modems)
The modem complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among
other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment.
You must, upon request, provide this information to your telephone company.
If your telephone equipment causes harm to the telephone network, the Telephone Company may
discontinue your service temporarily. Ifpossible, they will notify in advance. But,if advance notice is not
practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with
the FCC.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Your telephone company may make changes in its facilities, equipment, operations, or procedures that
could affect proper operation ofyour equipment. Ifthey do, you will be notified in advance togive you an
opportunity to maintain uninterrupted telephone service.
The FCC prohibits this equipment to be connected to party lines or coin-telephone service.
The FCC also requires the transmitter of a FAX transmission be properly identified (per FCC Rules Part
68, Sec. 68.381 (c) (3)).
/ for Canadian users only /
L Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le presentappareil numerique n'emetpas de bruits radioelectriquesdepassant les limites applicables aux
appareils numeriquesde Classe Bprescrites dans le reglement sur le brouillage radioelectrique edicte par
Industrie Canada.
L DOC notice (for products fitted with an Industry Canada-compliant modem)
The Canadian Department of Communications label identifies certified equipment. This certification
means that the equipment meets certain telecommunications network protective, operational and safety
requirements. The Department does not guarantee the equipment will operate to the user satisfaction.
Before installing this equipment, users ensure that it is permissible to be connected to the facilities of the
local Telecommunications Company. The equipment must also be installed using an acceptable method
of connection. The customer should be aware thatcompliance with the above conditions mightnot prevent
degradation of service in some situations.
Repairs to certified equipmentshould be madeby an authorized Canadian maintenancefacility designated
by the supplier. Any repairs or alterations made by the user to this equipment,or equipment malfunctions,
may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe system, if resent are connected together. This precaution
may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselv es, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
NOTICE: The Load Number (LN) assigned to each terminal device denotes the percentage of the total
load to be connected to a telephone loop which is used by the device, to prevent overloading. The
termination on a loop may consist of any combination of devices subject only to the requirement that the
sum of the Load Numbers of all the devices does not exceed 100.
/ for European users only /
CAUTION
v Danger of explosion if battery is incorrectly
replaced.
v Replace only with the same or equivalent
type recommended by the manufacturer.
v Dispose of used batteries according to the
manufacturer’s instructions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Introduction
Welcome to Gigabyte GS-SR125EDL Rack mount Server System Installation Guide. The guide
provides instructions for configuration hardware for the GS-SR125EDL your system.
This installation guide will assiste you in installing all the essential components for the sever system.
For your protection, please read and undertand all of the safety and operatinginstructions regarding your
Gigabyte Server and retain for future reference. The procedures in this guidebook assusmethat your are
a system or network administrator experienced in installing similar hardware.
Contents Packages
When opening the package, please ensure the system components are not damaged during the shipping.
Using the following checklist to v erify the contents. If any component is missing or damaged in the
system, please contact your vendor immediately.
þ Chassis
þ
þ
þ
Power Supply (Installed)
þ The 8EGPDRE Motherboard
þ Two CPU Heat Sinks
Silm ype CD-ROM drive (Installed)
Four Hadr Disk Drive Trays
þ GS-SR125EDL System Installation Guide þ Driver CD for motherboard driver & utility
þ USB Floppy Drive (Optional Packages)
WARNING!
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some precautions whenever you
work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3. Hold components by the edges and try not touch the IC chips, leads or connectors, or
other components.
4. Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX
power connector on the motherboard.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Feature Summary
Chapter 1 Features Summary
Motherboard
—
GA-8EGPDRE
Processor Supported — Dual socket 604 for Intel® FC-PGA XeonTM processor suopprts
up to 3.06GB
—
—
—
—
Intel® Xeon 533MHz FSB
Chipset
ServerWorks CMIC-SL Northbridge
ServerWorks CIOB-E Dual Giagbit LAN and PCI-X Bridge
ServerWorks CSB6 Southbridge
System Memory:
Memory Capacity
—
—
—
—
—
—
—
—
4 x 184-pin DDR266 DIMM Sockets
Supports 4GB Maximum Capacity
DDR266; Registered DDR
Memory Type
DIMM Size
64MB, 128MB, 256MB, 512MB, 1GB
2.5V only
Memory Voltage
Error Correction:
Expansion Slot
Single-bit Errors Correction, Multiple-bit Errors Detection
1 x Riser card with one full-height/full-length PCI-X
1 x Riser card with low-profile half -length PCI slot
Drive Bay:
Hard Disk Drives:
Floppy Drive
—
—
—
—
—
4 x IDE HDD
USB Floppy (Optional)
1 Slim type CD-ROM
4 X Redundant System Fan
1 X Power Fan
Slim Type CDROM
Cooling Fans:
Integrated LANs:
Controller
Bus
—
—
—
ServerWorks CIOB-E Gigabit Ethernet Controllers x 2
PCI 64Bit/33 MHz
PCI-X 64Bit/133 MHz
Advanced Software Function — Adapter Fault Tolerance
—
Adaptive Load Balancing
Integrated Graphics:
Controller
—
—
ATI® RAGE-XL VGA Controller
8MB SDRAM
Graphics Memory
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Integrated Super I/O:
Serial Ports
—
—
—
—
—
—
—
1 x Serial Port COM1 (Rear I/O-Shield)
1 x Serial Port COM2 (Front I/O Shield)
Both Support Console Redirection
1 x PS/2 Keyboard Port (Rear I/O-Shield)
1 x PS/2 Mouse Port (Rear I/O-Shield)
2 x USB ports (Rear I/O-Shield)
Keyboard/Mouse
USB: 1.1
2 x USB Port (Front Panel)
System BIOS:
BIOS Type
—
—
Phoenix® BIOS, Multi-bootBBS 1.0Compliant4Mb Flash Memory
ACPI 1.1, DMI, WFM, PXE, Plug and Play,
A/C Power Recovery
Special Features
Server Management Functions:(Optional)
BMC Chip
—
—
—
—
NS IPMI 1.5 controller
Failure Detection
Event Logging
IPMI 1.5 specification of Server management
32KB Nonvolatile Memory to Log System Failure Events
Follow the IPMI 1.5 specification of Server management
Remote Management
Environment
Ambient Temperature
—
—
—
—
—
Operating Temperature: 5oC to 35oC
Non-operating Temperature: 0oC to 50oC
10-85% operating Humidity at 30o C
CE, FCC, BSMI, UL
Relative Humidity
Safety Regulations
System:
Width: 430mm/19”, Depth: 650mm/25.5, Height: 43.2mm
Electrical Power Supply:
AC Voltage and Frequency — 100V/240V; 47Hz/63Hz
DC Power Supply 350W
—
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation Process
Chapter 2 System Hardware Installation
Please observe the safety information in chapter ¡§ Important Safety Information¡¨
Do not expose the server to extremeenvironmental conditions. Protect itfrom dust, humidity,
and heat.
Step 2-1: Chassis Removal
Step 1 Push down the two buttons located at two sides of the chassis.
Step 2 And slide toward to remove the top cover.
After removing the top cover, you can install CPU and other essential components.
Step 1
Step 2
Push Toward
Step 2-2: CPU Installation
Please make sure the CPU type and speed that are supported by the motherboard.
Step 1 To install the CPU(s), lift up the bar that located next to the socket.
Step 2 The noticed corner should point toward the end oflever. The CPU will only it in the orientation
as shown below.
Step 3 Then, align the CPU and insert it into the socket.Then, push the lever to the original position.
Step 1
Step 2
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Step 3
Step 2-3: Heat Sink Installation
Step 1 To install the heat sink, just simply put it on the retention module.
Step 1
Step 2-4: Memory Installation
Step 1 The DIMM slot has a notch, the DIMM memory module only fit in one direction.
Step 2 Align the memory notch to the module and push the memory into the DIMM socket.
Step 1
Step 2
Notch
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation Process
Step 2-5: PCI Expansion Card Installation
PCI Slot 2 is not compliance with this model.
GS-SR125EDL provides expansion riser slots for two peripheral cards, 100/133MHz , one full-height/
one half-length. To install the peripheral, please go through the following steps.
Step 1 Remove the screws on the riser bracket.
Step 2 Detach the riser bracket with both hands.
Step 3 Installing the PCI Riser card. To install the riser card, just simply push it into the module.
Step 4 Secure the card with screws.
Repeat Step 3 & 4 to install the rest of add-on cards.
Step 5 Finally, align the stable racks to the system module (see the arrow direction mark 1), and push
down vertically.
Step 6 Reverse Step 1 & 2 to secure the riser bracket firmly. Installation completed.
Step 2
Step 1
Step 3
Step 4
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Step 5
Step 2-6: Hard Disk Drive Installation
Step 1 Pull the hard disk drive tray handle and remove the tray from the chassis.
Step 2 Insert the hard disk drive into the tray.
Step 3 Secure each hard disk drive with 4 screws.
Step 4 After securing the hard disk drive with the screws, hold the hard drive handle at open position,
place the tray into chassis and push the hard disk drive tray handle to the locked position.
Step 1
Step 2
Step 4
Step 3
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Installation Process
Step 2-7: FAN Duct Installation
Step 1 Place the fan duct on the top of heat sinks.
Step 2 Fasten the fan duct with two screws.
Step1 & 2
Screw
Screw
Step 2-8: Reinstall Top Cover
Step 1 Gently apply force to the indentures with your thumbs and push toward the chassis (See the
arrow direction) to the lock position.
Step 1
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Chapter 3 Appearance of GS-SR125EDL
3-1: Front View of GS-SR125EDL
w
v
x
u
IDE HDD
u
v
USB Connectors
System LED
CD-ROM Disk
w
x
16
Download from Www.Somanuals.com. All Manuals Search And Download.
System Appearance
3-2: Rear View of GS-SR125EDL
w
v
x
z
y
u
|
{
PS/2 Keyboard & Mouse Connector
Low Profile
u
v
Full-Height / Full- Length
LAN 1 / 2 Ports
w
x
y
z
{
VGA Port
COM Port
USB Connectors
Power Connector
|
17
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
3-3: IDE Backplane Layout and Description
S
L
N
T
J
Q
F
E
K
M
H
O
P
B
G
C
R
A
D
I
X
U
W
V
A ,C ,D Power
G
FAN9
F , H
K , J
I
FAN1
FAN2
FAN10
IDE1
R
S
T
M , L FAN3
O, N FAN4
IDE2
SM BUS1
CON1
(SCA80-1)
P
Q
E
B
FAN5
FAN6
FAN7
FAN8
U
V
CON2
(SCA80-2)
CON3
(SCA80-3)
W
X
CON4
(SCA80-4)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Description
3-4: Switch and LED Indicators Description
Acting
Color
Status
Power LED
SYS LED
On
Green
Amber
Green
N/A
Pow er On
On
Pow er cable is plugged in
System stands by
No pow er
Blink
Off
On
Amber
System is ready but
degraded: some CPU Fault,
DIMM Killed
Critical Pow erModules Failure,
Critical FANs Failure,
Voltage (Pow er Supply),
critical Temperatureand Voltage
Normal temperature and
voltage
Off
N/A
LAN LED
On
Green
N/A
LANonline
Off
Blink
On
LANoffline
Green
Blue
LANactive
ID(Service LED)
Identified by users
Off
N/A
N/A
19
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
3-5: HDD LED Indicators Description
HDD LED 1
HDD LED 2
Acting
Off
Color
N/A
Status
HDD LED 1
HDD LED 1
HDD LED 2
HDD LED 2
HDD poweroff
On
Green
N/A
HDD poweron
HDD non-active
HDD active
Off
Blink
Green
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector Icon Description
3-6 : Connector Icon Description
Suggest Icon
Description
Keyboard
VGA
Mouse
LAN
Parallel Port
Serial Port
USB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Chapter 4 Motherboard Layout & Jumper Setting
IGnAtr-o8dEuGcPtiDoRnE Motherboard Layout
23
39
41 40
38
37 36
19
15
12
11
28 29
43
22
13
5
42
10
3
20
21
9 8 7 6
30
24
27
25
18
17
1
2
4
26
32
35
34 33
31
14
16
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector and Jumper Setting Introduction
GA-8EGPDRE Motherboard Layout Description
CPU2
(Install First)
1
23
WOM1
2
3
CPU1
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
PWRDET1
SMBUS1
SMBUS2
FFC1
CMIC-SL
CSB6
4
5
CIOBE
6
DIMM1
PCIXSLOT2
PCI64_SLOT
Graphic Memory
IDE2
DIMM2
7
DIMM3
8
DIMM4
9
10
ATI Rage XL
IDE1
11 BIOS
VS312AB
IDE3
12
13
14
15
16
17
18
19
20
21
22
FDD1
BT1
Giga RAID
KB_MS
USB2
SYS_FAN1
SYS_FAN2
SYS_FAN3
CPU_FAN1
CPU_FAN2
POWER_FAN1
IPMB1
COM1
VGA
GLAN1
GLAN2
JP6
IPMB2
JP9
WOL1
23
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
13) BT1 (Battery)
Li-Battery 3V
CAUTION
v Danger of explosion if battery is incorrectly
replaced.
v Replace only with the same or equivalent
type recommended by the manufacturer.
v Dispose of used batteries according to the
manufacturer’s instructions.
14 / 15 / 16) SYS_FAN1/2/3 (System Fan Connector)
SYS_FAN2
Pin No.
Definition
GND
+12v/Control
Sense
1
1
2
3
SYS_FAN1
SYS_FAN3
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector and Jumper Setting Introduction
17 / 18) CPU_FAN1/2 (CPU Fan Connector)
Pin No.
Definition
GND
+12v/Control
Sense
1
2
3
1
CPU_FAN1
CPU_FAN2
ØPlease note, a proper installation of the CPU
cooler is essential to prevent the CPU from
running under abnormal condition or damaged
by overheating.The CPU fan connector
supports Max. currentup to 600mA .
19) POWER_FAN1 (Power Fan Connector)
1
Pin No.
Definition
GND
+12v/Control
Sense
1
2
3
25
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
20 / 21) IPMB1/ IPMB 2 (IPMB Connector)
Pin No.
Definition
SCl_IPMB
GND
1
2
3
SDA_IPMB
1
22) WOL1 (Wake on LAN Connector)
Pin No.
Definition
+5VSB
GND
1
1
2
3
Signal
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector and Jumper Setting Introduction
23) WOM1 (Wake on Modem Connector)
1
Pin No.
Definition
Signal
GND
1
2
24) PWRDET1 (Power Status Interface)
1
Pin
1
Definition
I2C_CLK
GND
2
3
I2C_Data
NC
4
27
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
25 / 26) SMBUS1 / 2 (SMBUS Connectors)
1
Pin
1
Definition
VCC
2
SDA
SCL
3
4
NC
5
GND
SMBUS1
SMBUS2
27) FFC1 (IPMB I2C Bus Connector)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector and Jumper Setting Introduction
28 / 29) PCIX_SLOT2 / PCI64_SLOT(PCI Slots)
PCIX_SLOT2
PCIX_SLOT2:
Supports full-height/full-length PCI-X
PCI64_SLOT:
Supports low-profile half -length PCI slot
PCI64_SLOT
31/ 32 /33) IDE2 /IDE1 / IDE3 (IDE1 / IDE2 / IDE3Connectors)
Important Notice:
Please connect firstharddisk to IDE1 and connect CDROM to IDE2.The red stripe of the ribbon cable
must be the same side with the Pin1.
1
IDE1
1
1
IDE2
IDE3
29
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
34) FDD1 (Floppy Connector)
Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and
2.88Mbytes floppy disk types. The red stripe of the ribbon cable must be the same side with the
Pin1.
1
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Connector and Jumper Setting Introduction
1-2close: Setthe PCI-XBus Speed at 100MHz
42) JP6 (PCIX_SLOT2 Bus Speed Functon)
1
1
2-3 close: Setthe PCI-X BusSpeed at133MHz
(Default)
43) JP9 (PCI_SLOT1 Bus Speed Functon)
1
1
1-2 close: Conventional PCI Mode
2-3 close: PCI-X 66MHz(Default)
Open: Auto
31
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Chapter 5 BIOS Setup
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the
basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it
retains the Setup information when the power is turned off.
ENTERINGSETUP
Power ON the computer and press <F2> immediately will allow you to enter Setup.
CONTROLKEYS
<á>
<â>
<ß>
<à>
<Esc>
Move to previous item
Move to next item
Move to the item in the left hand
Move to the item in the right hand
Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and
Option Page Setup Menu - Exit current page and return to Main Menu
<+/PgUp> Increase the numeric value or make changes
<-/PgDn> Decrease the numeric value or make changes
<F1>
<F2>
<F3>
<F4>
<F5>
<F6>
<F7>
<F8>
<F9>
<F10>
General help, only for Status Page Setup Menu and Option Page Setup Menu
Reserved
Reserved
Reserved
Restore the previous CMOS value from CMOS, only for Option Page Setup Menu
Reserved
Load the Optimized Defaults
Reserved
Reserved
Save all the CMOS changes, only for Main Menu
32
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
GETTINGHELP
Main Menu
The on-line description ofthe highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the
possible selections for the highlighted item. To exit the Help Window press <Esc>.
l
l
Main
This setup page includes all the items in standard compatible BIOS.
Advanced
This setup page includes all the items ofAMI special enhanced features.
(ex: Auto detect fan and temperature status, automatically configure hard disk parameters.)
Security
l
l
l
Change, set, or disable password. It allows you to limit access the system and setup.
Boot
This setup page include all the items of first boot function features.
Exit
There are five optionsin this selection: Exit Saving Changes, Exit Discarding Changes, Load
Optimal Defaults, Load Failsafe Defaults, and Discard Changes.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Main
Once you enter Phoenix BIOS Setup Utility, the Main Menu (Figure 1) will appear on the screen. Use
arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.
PhoenixBIOS Setup Utility
Main
Advanced
Security
[00:13:12]
Boot
Exit
System Time:
Item Specific Help
System Date:
[04/30/2003]
[1.44MB 31/2]
[CD-ROM]
[None]
Lagecy Disktte A
4Primary IDE Master
4Primary IDE Slave
System Memory
Extended Memory
Language
ø
ø
ø
ø
640KB
623264KB
[Englisg (US)]
BIOS Version
F1: Help
hi: Select Item
+ -: Change Values
F5: Setup Defaults
Esc: Exit
fg: Select Menu
Enter: Select4Sub-Menu F10: Save&Exit
Figure 1: Main
CSystem Time
The time is calculated based on the 24-hour military time clock. Set the System Time (HH:MM:SS)
CSystem Date
Set the System Date. Note that the “Day”automatically changed after you set the date.
(Weekend: DD: MM: YY) (YY: 1099~2099)
“ø”Indicates DISPLAY ONLY
34
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
CLegacyDiskette A
This category identifies the type of floppy disk drive A that has been installed in the computer.
8None
No floppy drive installed
8360KB, 51/4 in.
81.2MB, 31/2 in.
8720K, 31/2 in.
81.44M, 31/2 in.
82.88M, 31/2 in.
31/2 inch AT-type high-density drive; 360K byte capacity
31/2 inch AT-type high-density drive; 1.2M byte capacity
31/2 inch double-sided drive; 720K byte capacity
31/2 inch double-sided drive; 1.44M byte capacity.
31/2 inch double-sided drive; 2.88M byte capacity.
GNote: The 1.25MB,31/2 reference a 1024 byte/sector Japanese media format. The 1.25MB,31/2 diskette
requires 3-Mode floppy-disk drive.
CIDEPrimary Master, Slave / Secondary Master, Slave
The category identifies the types ofhard disk from driveC to F that has been installed in the computer.
There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will
automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If y ou select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in the
documentation form your hard disk vendor or the system manufacturer.
8 TYPE
1-39: Predefined types.
Users: Set parameters by User.
Auto: Set parameters automatically. (Default Vaules)
CD-ROM/DVD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD
parameters automatically.
ATAPI Removable: Removable disk drive is installed here.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
8 Multi-Sector Transfer
This field displays the information of Multi-Sector Transfer Mode.
Disabled: The data transfer from and to the device occurs one sector at a time.
Auto: The data transfer from and to the device occurs multiple sectors at a time if the device
supports it.
8 LBA Mode
This field shows if the device type in the specific IDE channel
supportLBA Mode.
8 32-Bit I/O
Enable this function to maximize the IDE data transfer rate.
8 Transfer Mode
8 Ultra DMA Mode
This field shows the information of Teansfer Mode.
This filed displays the DMA mode of the device in the specific IDE
channel.
CSystem Memory
The POST of the BIOS will determine the amount of base (or conventional) memory
installed in the system.
The value of the base memory is typically 512 K for systems with 512 K memory
installed on the motherboard, or 640 K for systems with 640 K or more memory
installed on the motherboard.
CExyended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1 MB in the CPU’s memory
address map.
CLanguage
This field displays the language that is applied by the current system.
CBIOS version
This field displays the information of BIOS version.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Advanced
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Exit
} Advanced Processor Option
} PCI Configuration
} Cache Memory
Item Specific Help
} I/O Device Configuration
USB Host Controller
Onboard PXE Function
System After AC Back
} Console Redirection
[Disabled]
[Disabled]
[Off]
F1: Help
hi: Select Item
+ -: Change Values
F5: Setup Defaults
Esc: Exit
fg: Select Menu
Enter: Select4Sub-Menu F10: Save&Exit
Figure 2: Advanced
About This Section: Advanced
This section “Advanced” is divided into six sub-menus.
EAdvanced Processor Option
EPCI Configuration
ECache Memory
EI/O Device Configuration
EUSB Host Controller
EOnboard PXE Function
ESystem After AC Back
EConsole Redirection
With this section, allowing user to configure your system for basic operation. User can change the
system’s default boot-up sequence, keyboard operation, shadowing and security, etc.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Advanced Processor Option
PhoenixBIOS Setup Utility
Advanced
Advanced Processor Option
Fast String Operations
Compatible FPU COde
Spilt Lock Operations
Item Specific Help
[Enabled]
[Disabled]
[Enabled]
F1: Help
hi: Select Item
fg: Select Menu
Figure 2-1: Advanced Processor Option
+ -: Change Values
F5: Setup Defaults
Esc: Exit
Enter: Select4Sub-Menu F10: Save&Exit
CAdvanced Processor Option
4 Fast String Operations
Set the CPU fast string features.
8 Enabled
8 Disabled
Enable CPU fast string features. (Default)
Disable this function.
4 Compatible FPU Code
CPU compatible Floating Point Unit OPcode usage model.
8 Enabled
8 Disabled
Enable CPU compatible FPU code.
Disable this function. (Default)
4 Spilt Lock Operation
CPU split-lock feature setting.
8 Enabled
8 Disabled
Enable CPU spilt-lock features.
Disable this function. (Default)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
PCI Configuration
PhoenixBIOS Setup Utility
Advanced
PCI Configuration
Item Specific Help
PCI/PNP ISA UMB Region Exclusion
PCI/PNP ISA IRQ Resource Exclusion
ISA graphics device installed
[No]
F1: Help
hi: Select Item
+ -: Change Values
F5: Setup Defaults
Esc: Exit
fg: Select Menu
Enter: Select4Sub-Menu F10: Save&Exit
Figure 2-2: PCI Configuration
CPCI Configuration
This section provide the addtional setup menus for users to confiure PCI devices.
4 PCI/PNP UMB Region Exclusion
Reserve specific upper memory blocks for use by legacy ISA devices.
4 PCI/PNP ISA IRQ Resource Exclusion
Reserve specific IRQs for use by legacy ISA devices.
4 ISA Graphics Device Installed
8 Yes
Enable ISA (NON-VGA) graphics devices to access palette data in PCI
VGA device.
8 No
Disable ISA (NON-VGA) graphics devices to access palette data in PCI
VGA device.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Cache Memory
PhoenixBIOS Setup Utility
Advanced
Cache Memory
Item Specific Help
} Memory Cache
[Enabled]
} Cache System BIOS area
} Cache Vedio BIOS area
} Cache Base 0-512K
} Cache Base 512K-640K
} Extended Memory Area
} Cache A000-AFFF
} Cache B000-BFFF
} Cache C800-CFFF
} Cache CC00-CFFF
} Cache D000-DFFF
} Cache D400-D7FF
} Cache E000-E3FF
} Cache E400-F7FF
[Write Protect]
[Write Protect]
[Write Back]
[Write Back]
[Write Back]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
F1: Help
hi: Select Item
fg: Select Menu
Figure 2-3: Cache Memory
+ -: Change Values
F5: Setup Defaults
Esc: Exit
Enter: Select4Sub-Menu F10: Save&Exit
CCache Memory
This section provide users to determines how to configure the specific block of memory.
4 Memory Cache
Set the state of the memory.
8 Enabled
8 Disabled
Enable the memory cache.
Disable the memory cache. (Default)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
4 Cache System BIOS area
Controls caching of System BIOS area.
8 Uncached
System BIOS area is uncached.
Write/Saved settings is ingnored. (Default)
8 Write Protect
4 Cache Vedio BIOS area
Controls caching of Vedio BIOS area.
8 Uncached
Vedio BIOS area is uncached.
Write/Saved setting is ingnored. (Default)
8 Write Protect
4 Cache Base 0-512K / 512K-640K
Controls caching of 512K / 512K-640K base memory
8 Uncached
Vedio BIOS area is uncached.
8 Write Through
8 Write Protect
8 Write Back
Writes are cached and sent to main memory at once.
Write/Saved settings is ingnored.
Writes are cached, but not sent to main memory until necessary.
(Default)
4 Cache Extended Memory Area
Controls caching of system memory above one megabyte.
8 Uncached
Vedio BIOS area is uncached.
8 Write Through
8 Write Protect
8 Write Back
Writes are cached and sent to main memory at once.
Write/Saved settings is ingnored.
Writes are cached, but not sent to main memory until necessary.
(Default)
4 Cache A000-AFFF / B000-BFFF/ C8000-CFFF / CC00-CFFF / D000-DFFF /
D400-D7FF/ D800-DBFF / DC00-DFFF / E000-E3FF / E400-F7FF
8 Disabled
This block is not cached. (Default)
8 USWC Caching
Uncached Speculative Write Comboned.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
I/O Device Configuration
PhoenixBIOS Setup Utility
Advanced
I/O Device Configuration
Serial Port A
Item Specific Help
[Auto]
Serial Port B
[Auto]
Floppy Disk controller
Base I/O address
[Enabled]
[Primary]
F1: Help
hi: Select Item
fg: Select Menu
Figure 2-4: I/O Configuration
+ -: Change Values
F5: Setup Defaults
Esc: Exit
Enter: Select4Sub-Menu F10: Save&Exit
CI/O Device Configuration
4 Serial Port A
This allows users to configure serial protA by using this option.
8Disabled
8Enabled
8Auto
Disable the configuration.
Enable the configuration.
BIOS or O.S will select the configuration automatically.
4 Serial Port B
This allows users to configure serial prot B by using this option.
8Disabled
8Enabled
8Auto
Disable the configuration.
Enable the configuration.
BIOS or O.S will select the configuration automatically.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
4 Floppy Disk Controller
Enable and disable the function of floppy disk controller.
8Disabled
8Enabled
8Auto
Disable the configuration.
Enable the configuration.
BIOS or O.S will select the configuration automatically.
4 Base I/O address
Set the base I/O address for the floppy disk controller by usine this option.
8Primary
Set the base I/O address to 3F0~3F7. (Default)
Set the base I/O address to 370~377
8Secondary
CUSB Host Controller
This option allows user to enable USB host controller.
8Enable
Enable USB host controller. (Default Value)
Disable this function.
8Disabled
COnboard PXEFunction
This option allows user to enable PXE function.
8Enable
Enable PXE function.
8Disabled
Disable this function. (Default Value)
CSystemAfter AC Back
8On State
8Off State
8Last State
System power state when AC cord is re-plugged.
Do not power on system when AC power is back. (Default Value)
Set system to the last sate when AC power is removed. Do not power on
system when AC power is back.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Console Redirection
PhoenixBIOS Setup Utility
Advanced
Console Redirection
COM Port Address
Baud Rate
Item Specific Help
[Disabled]
[19.2K]
[PC ANSI]
[Direct]
[Off]
Cosole Type
Console Redirection
Continue C.R after POST
# fo Vedio pages to support
[1]
F1: Help
hi: Select Item
fg: Select Menu
Figure 2-5: Console Redirection
+ -: Change Values
F5: Setup Defaults
Esc: Exit
Enter: Select4Sub-Menu F10: Save&Exit
CConsole Redirection
This option allow user to remote monitoring and controlling the BIOS by client computer.
4 COM Port Address
Set the the COM Port address for Console Redirection by usine this option.
8COM A
Attempt to redirect console via COM A.
Attempt to redirect console via COM B.
Disable Console Redirction. (Default Value)
8On-board COM B
8Disabled
GNote: If Console Redirection is set to Enabled, user is allowed to adjust the options of
C.R Port Baud Rate and C.R after Post.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
4 Baud Rate
Enable the specified of C. R Port Baud Rate.
8300
Enable the specific baud rate at 300.
81200
89600
819.2K
838.4K
857.6K
8115.2K
Enable the specific baud rate at 1200.
Enable the specific baud rate at 9600.
Enable the specific baud rate at 19.2K. (Default )
Enable the specific baud rate at 38.4K.
Enable the specific baud rate at 57.6K.
Enable the specific baud rate at 115.2K.
4 Console Type
Enable the specified Cosole Type.
8Options: PC-ANSI 7bit (Default), VT100, VT100 8bit, VT100F, VT-U TF8
4 Flow Control
Enable the function of flow control.
8Options: CTS/RTS (Default), None, XON, XOFF
4 Console Redirection
Identifies whether the console is connected directly to the system or a modem is functioned to
connect.
8Direct
Identifies the console is connected directly to the system. (Default)
Identifies the console is connected via the modem.
8Via Modem
45
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
4 Continue C.R after POST
Enable Console Redirection after O.S has loaded
8On
8Off
Continue C.R after Power on Self Test.
Disable this function. (Default)
4 # of Vedio pages to support
This is the number ofvedio pages to allocate for console redirection when vedio hardware is not
available.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Security
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Set User Password
Set Supervisor Password
[Enter]
Item Specific Help
[Enter]
ø
Password on boot
Fixed disk boot sector
Diskette access
[Disabled]
[Normal]
[Supervisor]
[Disabled]
[Disabled]
ø
ø
Virus check reminder
System backup reminder
F1: Help
hi: Select Item
+ -: Change Values
F5: Setup Defaults
Esc: Exit
fg: Select Menu
Enter: Select4Sub-Menu F10: Save&Exit
Figure 3: Security
G
About This Section: Security
In this section, user can set either supervisor or user passwords, or both for different level of
password securities. In addition, user also can set the virus protection for boot sector.
CSet User Password
You can only enter but do not have the right to change the options of the setup menus. When
you select this function, the following message w ill appear at the center of the screen to assist
you in creating a password.
Type the password up to 6 characters in lengh and press <Enter>. The password typed now
will clear any previously entered password from the CMOS memory. You will be asked to
confirm the entered password. Type the password again and press <Enter>. You may also
press <Esc> to abort the selection and not enter a specified password.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
CSet Supervis or Password
You can install and change this options for the setup menus. Type the password up to 6
characters in lengh and press <Enter>. The password typed now will clear any prev iously
entered password from the CMOS memory. You w ill be asked to confirm the entered
password. Type the password again and press <Enter>. You may also press <Esc> to abort
the selection and not enter a specified password or press <Enter> key to disable this option.
CPassword on boot
Password entering will be required when system on boot.
8Enabled
8Disabled
Requries entering password when system on boot.
Disable this function. (Default)
CFixed disk boot sector
8Write Protect Write protects boot sector on harddisk to protect against virus.
8Normal Set the fixed disk boot sector at Normal state. (Default)
CVirus check reminder
8Daily
Daily displays virus check reminder message at boot.
8Every Mondy
81st of every month
Displays virus check reminder message at boot atevery Monday.
Displays virus check reminder message atboot atthe 1stof every
month .
8Disabled
Disable this function. (Default)
CSystem back up reminder
8Daily
Daily displays system backup reminder message at boot.
8Every Mondy
Displays system backup reminder message at boot at every
Monday.
81st of every month
8Disabled
Displays system backup reminder message at boot at the 1st of
every month .
Disable this function. (Default)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Boot
PhoenixBIOS Setup Utility
Security Boot
Main
Advanced
Exit
+ Removable Device
+ Hard Drive
Item Specific Help
F5: Setup Defaults
CD-ROM Drive
F1: Help
hi: Select Item
fg: Select Menu
+ -: Change Values
Esc: Exit
Enter: Select4Sub-Menu F10: Save&Exit
Figure 4: Boot
G
About This Section: Boot
The “Boot”menu allows user to select among four possible types of boot devices listed
using the up and down arrow keys. By applying <+> and <Space> key, you can promote
devices and by using the <-> key, you can demote devices. Promotion or demotion of devices
alerts the priority that the system uses to search for boot device on system power on.
CBoot Device Priority
} Removable Device / Hard Drive / CD-ROM Drive
These three fields determines which type of device the system attempt to boot from after
PhoenixBIOS Post completed. Specifies the boot sequence from the available devices. If the
first device is not a bootable device, the system will seek for next available device.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Exit
PhoenixBIOS Setup Utility
Security Boot
Main
Advanced
Exit
Exit Saving Changes
Exit Discarding Changes
Load Settup Default
Discard Changes
Item Specific Help
F5: Setup Defaults
Save Changes
F1: Help
hi: Select Item
fg: Select Menu
+ -: Change Values
Esc: Exit
Enter: Select4Sub-Menu F10: Save&Exit
Figure 5: Exit
G
About This Section: Security
Once you have changed al ofthe setvalues in the BIOS setup,you should save your chnages and
exit BIOS setup program. Select “Exit” from the menu bar, to display the following sub-menu.
EExit Saving Changes
EExit Discarding Changes
ELoad Settup Default
EDiscard Change
ESave Changes
CExit Saving Changes
This option allows user to exit system setup with saving the changes.
Press <Enter> on this item to ask for the following confirmation message:
Pressing ‘Y’to store all the present setting values tha user made in this time into CMOS.
Therefore, whenyou boot up y our computer next time, the BIOS will
re-configure your system according data in CMOS.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
CExit Discarding Changes
This option allow s user to exit system setup without changing any
previous settings values in CMOS. The previous selection remain in effect.
This w ill exit the Setup Utility and restart your compuetr when selecting this option.
Press <Enter> on this item to ask for confirmation message.
CLoad SettupDefault
This option allow s user to load default values for all setup items.
When you press <Enter> on this item, you will get a confirmation dialog box with a message
as below:
Setup Confirmation
Load previous configuration now?
[Yes]
[No]
CDiscard Changes
This option allow s user to load previos values from CMOS for all setup item.
When you press <Enter> on this item, you will get a confirmation dialog box with a message
as below:
Setup Confirmation
Load previous configuration now?
[Yes]
[No]
Press [Yes] to load the prev ios values from CMOS for all setup item.
CSave Changes
This option allows user to save setup daya to CMOS.
When you press <Enter> on this item, you will get a confirmation dialog box with a message
as below:
Setup Confirmation
Load previous configuration now?
[Yes]
[No]
Press [Yes] to save setup daya to CMOS.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
GS-SR125EDL Rack mount Server
Chapter 6 Appendix
6-1: Acronyms
Acronyms
ACPI
APM
AGP
Meaning
Advanced Configuration and Power Interface
Advanced Power Management
Accelerated Graphics Port
Audio Modem Riser
AMR
ACR
BBS
Advanced Communications Riser
BIOS Boot Specification
Basic Input / Output System
Central Processing Unit
BIOS
CPU
CMOS
CRIMM
CNR
DMA
DMI
Complementary Metal Oxide Semiconductor
Continuity RIMM
Communication and Networking Riser
Direct Memory Access
Desktop Management Interface
Dual Inline Memory Module
Dual Retention Mechanism
Dynamic Random Access Memory
Double Data Rate
DIMM
DRM
DRAM
DDR
ECP
Extended Capabilities Port
Extended System Configuration Data
Error Checking and Correcting
Electromagnetic Compatibility
Enhanced Parallel Port
ESCD
ECC
EMC
EPP
ESD
Electrostatic Discharge
FDD
Floppy Disk Device
FSB
Front Side Bus
HDD
IDE
Hard Disk Device
Integrated Dual Channel Enhanced
Interrupt Request
IRQ
52
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup
Acronyms
I/O
Meaning
Input / Output
IOAPIC
ISA
Input OutputAdvanced Programmable Input Controller
Industry Standard Architecture
Local Area Network
LAN
LBA
Logical Block Addressing
Light Emitting Diode
LED
MHz
MIDI
MTH
MPT
NIC
Megahertz
Musical Instrument Digital Interface
Memory Translator Hub
Memory Protocol Translator
Network Interface Card
Operating System
OS
OEM
PAC
Original Equipment Manufacturer
PCI A.G.P. Controller
POST
PCI
Power-On Self Test
Peripheral Component Interconnect
Rambus in-line Memory Module
Special Circumstance Instructions
Single Edge Contact Cartridge
Static Random Access Memory
Symmetric Multi-Processing
System Management Interrupt
Universal Serial Bus
RIMM
SCI
SECC
SRAM
SMP
SMI
USB
VID
Voltage ID
ZCR
Zero Channel RAID
53
Download from Www.Somanuals.com. All Manuals Search And Download.
|