Gefen Network Router DVI 1600HD User Manual

DVI 1600HD  
Extender  
EXT-DVI-1600HD  
User Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
1
2
3
4
5
7
8
Introduction  
Operation Notes  
Features  
Sender Unit Panel Layout  
Sender Unit Panel Descriptions  
Receiver Unit Panel Layout  
Receiver Unit Panel Descriptions  
10 Connecting The DVI 1600HD Extender  
11 Connecting And Operating The DVI 1600HD Extender  
12 Specications  
13 Warranty  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
Congratulations on your purchase of the DVI 1600HD Extender. Your complete  
satisfaction is very important to us.  
Gefen  
Gefen delivers innovative, progressive computer and electronics add-on solutions  
that harness integration, extension, distribution and conversion technologies.  
Gefen’s reliable, plug-and-play products supplement cross-platform computer  
systems, professional audio/video environments and HDTV systems of all sizes  
with hard-working solutions that are easy to implement and simple to operate.  
The Gefen DVI 1600HD Extender  
The Gefen DVI-1600HD is a perfect solution for extending and managing control  
systems at great distances. The Gefen DVI-1600HD sends DVI or HDMI, Audio,  
and RS232C signals up to 300m away when used with DVI at 1920x1200 and up  
to 2km when used with DVI at lower resolutions. It maintains HD video signals  
up to 1920x1200 with computers and 1080p with HD equipment. Additionally,  
extension of RS232 signals helps create long-distance control systems for AV  
integration or touch-panel systems.  
How It Works  
The Gefen DVI-1600HD system uses a send-and-receive methodology. The DVI/  
HDMI/Audio/RS232C source devices are plugged into the Sender module. At  
the Receiver, remote devices (including an HD display) plug into the Receiver  
module. The proper length of ber optic cable is connected at both ends. Power  
supplies for the modules are plugged into wall sockets and a crisp vibrant HD  
picture results.  
Note: This device fully supports Display Data Channel (DDC) and High-  
Bandwidth Digital Content Protection (HDCP) when the front panel switch on the  
sender module is selected to HDMI.  
The Gefen DVI-1600HD uses a DVI connector for video. HDMI can be sent by  
using adapters or combo cables to provide DVI video with external digital audio  
as combined input to the DVI-1600HD Sender unit. The result will be HDMI with  
embedded audio at the Receiver end.  
The digital input jacks can only support D-PCM or PCM stereo audio formats.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION NOTES  
READ THESE NOTES BEFORE INSTALLING OR  
OPERATING THE DVI 1600HD EXTENDER  
DVI 1600HD Extender uses 4 strands of LC terminated ber optic cable.  
Single-mode and multi-mode ber optic cable types are both supported.  
DVI and HDMI modes (for HDCP) are available and are selectable via a  
switch located on the front panel of the DVI 1600HD sender unit.  
Analog stereo RCA , digital S/PDIF, and digital TOSLINK inputs are all  
available for input but only one is selectable for transmission to the receiver.  
The selected audio input will be replicated out of all three audio outputs on  
the receiver unit.  
HDMI mode supports HDCP with resolutions up to 1080p Full HD. Both  
single and multi-mode cables are supported at distances up to 650 feet (200  
meters).  
DVI mode does not support HDCP with resolutions up to 1920 x 1200.  
Both single-mode and multi-mode cables are supported. Multi-mode ber  
can support distances of up to 1640 feet. Single-mode ber can support  
distances of up to 6560 feet (2 kilometers).  
HDMI 1.2 compliant.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES  
Features  
Pure signal integrity and best image over long distances  
Fiber-optic transmission medium eliminates electromagnetic interference  
(EMI) during send or receive operations  
Lightweight, rugged cabling and connectors  
Cost effective per foot/meter  
Low power consumption at 72W total  
Plug and play installation ease -- no software drivers  
Can use both Single and Multimode optical ber cables  
Maximum range of 2km for DVI, 200m if sending DDC/HDMI with HDCP  
RS232 signal extension helps create long-distance control systems for A/V  
integration  
Package Includes  
(1) Gefen DVI-1600HD Sender  
(1) Gefen DVI-1600HD Receiver  
(1) 6 Foot DVI Video Cable (M-M)  
(1) 6 Foot DB9 RS-232 Cable (M-F)  
(1) User’s Manual  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SENDER UNIT PANEL LAYOUT  
Front Panel  
1
2
3
4
5
6
7
8
9
10  
Back Panel  
11  
12  
13  
14  
15  
16  
17  
18  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SENDER UNIT PANEL DESCRIPTIONS  
1
2
DVI/HDMI Mode Selector Switch  
This switch will set the video mode. DVI mode is intended for use with  
computers and will support resolutions of up to 1920 x 1200. HDMI mode is for  
use with consumer HDMI devices and supports HDCP and resolutions of up to  
1080p Full HD. There are also distance limitations associated with the different  
modes. Please see page ## for details.  
Audio Input Selector Button  
This button is used to select the audio input source. There are three input  
options: Audio (analog stereo), Coax (digital S/PDIF), Optical (digital TOSLINK).  
Each press will cycle through these selections.  
3
4
5
6
Audio Selection LED Indicator  
This LED will be active when the Audio (analog stereo) audio source has been  
selected.  
Coax Selection LED Indicator  
This LED will be active when the Coax (digital S/PDIF) audio source has been  
selected.  
Optical Selection LED Indicator  
This LED will be active when the Optical (digital TOSLINK) audio source has  
been selected.  
Reset Button  
This button is used to cycle the power off and on. In most cases this will force  
the source to re-establish a link with the endpoint device. This will also force the  
source to re-read the EDID.  
7
Optic B LED Indicator  
This LED will indicate the status of the connection between the sender and  
receiver’s 2 pair of LC ber optic cables labeled Optic B. This LED will be active  
when a valid link between the sender and receiver has been established.  
8
9
Status LED Indicator  
This LED will indicate the status of the unit and will be active when all devices  
are properly connected and indicates that the unit is working within specication.  
Optic A LED Indicator  
This LED will indicate the status of the connection between the sender and  
receiver’s 2 pair of LC ber optic cables labeled Optic A. This LED will be active  
when a valid link between the sender and receiver has been established.  
10 Power LED Indicator  
This LED will become active once the included 12V DC power supply has been  
properly connected between this unit and an available wall power socket.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SENDER UNIT PANEL DESCRIPTIONS  
11 12V DC Power Input  
Connect the included 12V DC power supply to this input. The Power LED will  
become active when the 12V DC power supply has been properly connected to  
the unit and an open wall power socket.  
12 Analog Stereo Audio Input  
This input will accept analog stereo audio from one pair or RCA audio cables.  
This input corresponds to LED labeled Audio on the front panel.  
13 S/PDIF Digital Audio Input  
This input will accept digital audio from a S/PDIF (coaxial) audio cable. This  
input corresponds to LED labeled Coax on the front panel.  
14 Optic Digital Audio Input  
This input will accept digital audio from a TOSLINK (optical) audio cable. This  
input corresponds to LED labeled Optical on the front panel.  
15 RS-232 Serial Communications Input  
This port is capable of 2-way serial communication between RS-232 devices  
connected to the sender and receiver. This port can be connected to a  
computers serial communications port for interaction with a RS-232 serial  
communications device connected to the receiver.  
16 DVI Input  
This input will accept a DVI or HDMI (with a HDMI to DVI adapter/cable) source  
device.  
17 Fiber Optic Input A  
This connector accepts a pair of LC terminated ber optic cable that will link the  
sending and receiving unit together. When the cables between this port and the  
corresponding ports on the receiver are properly connected, the LED indicator  
labeled Optic A on the front panel of both units will become active.  
18 Fiber Optic Input B  
This connector accepts a pair of LC terminated ber optic cable that will link the  
sending and receiving unit together. When the cables between this port and the  
corresponding ports on the receiver are properly connected, the LED indicator  
labeled Optic B on the front panel of both units will become active.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECEIVER UNIT PANEL LAYOUT  
Front Panel  
1
2
3
4
5
Back Panel  
6
7
8
9
10  
11  
12  
13  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECEIVER UNIT PANEL DESCRIPTIONS  
1
2
Reset Button  
This button is used to cycle the power off and on. In most cases this will force  
the source to re-establish a link with the endpoint device. This will also force the  
source to re-read the EDID.  
Optic B LED Indicator  
This LED will indicate the status of the connection between the sender and  
receiver’s 2 pair of LC ber optic cables labeled Optic B. This LED will be active  
when a valid link between the sender and receiver has been established.  
3
4
Status LED Indicator  
This LED will indicate the status of the unit and will be active when all devices  
are properly connected and indicates that the unit is working within specication.  
Optic A LED Indicator  
This LED will indicate the status of the connection between the sender and  
receiver’s 2 pair of LC ber optic cables labeled Optic A. This LED will be active  
when a valid link between the sender and receiver has been established.  
5
6
Power LED Indicator  
This LED will become active once the included 12V DC power supply has been  
properly connected between this unit and an available wall power socket.  
12V DC Power Input  
Connect the included 12V DC power supply to this input. The Power LED will  
become active when the 12V DC power supply has been properly connected to  
the unit and an open wall power socket.  
7
8
9
Analog Stereo Audio Output  
This output will supply analog stereo audio to one pair or RCA audio inputs on  
a device. This input will always be active when a 2 channel source, analog or  
digital, is selected on the sender.  
S/PDIF Digital Audio Output  
This output will supply digital audio to a S/PDIF (coaxial) audio input device. This  
input will always be active when a 2 or multi-channel source, analog or digital, is  
selected on the sender.  
Optic Digital Audio Output  
This output will supply digital audio to a TOSLINK (optical) audio input device.  
This input will always be active when a 2 or multi-channel source, analog or  
digital, is selected on the sender.  
10 RS-232 Serial Communications Input  
This port is capable of 2-way serial communication between RS-232 devices  
connected to the sender and receiver. This port can be connected to a serial  
communications device for interaction with a computer via an RS-232 serial  
communications cable connected to the sender.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECEIVER UNIT PANEL DESCRIPTIONS  
11 DVI Output  
This output will accept a DVI or HDMI (with a DVI to HDMI adapter/cable)  
capable device.  
12 Fiber Optic Input A  
This connector accepts a pair of LC terminated ber optic cable that will link the  
sending and receiving unit together. When the cables between this port and the  
corresponding ports on the receiver are properly connected, the LED indicator  
labeled Optic A on the front panel of both units will become active.  
13 Fiber Optic Input B  
This connector accepts a pair of LC terminated ber optic cable that will link the  
sending and receiving unit together. When the cables between this port and the  
corresponding ports on the receiver are properly connected, the LED indicator  
labeled Optic B on the front panel of both units will become active.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING THE DVI 1600HD EXTENDER  
How to Connect the DVI 1600HD Extender  
1. Connect the DVI or HDMI (using a HDMI to DVI adapter/cable) to the DVI  
1600HD Extender sending unit using a user supplied cable.  
NOTE: If the source device is a HDMI device that requires HDCP, please  
set the DVI/HDMI mode selector switch to HDMI. The unit’s distance will  
be limited to 650 feet (200 meters) on 4 LC single or multi-mode ber optic  
cables while in this mode.  
2. Connect up to 3 audio sources to the sending unit using user supplied  
cables. Input options are as follows:  
Analog stereo using one pair of RCA analog stereo cables.  
Digital coaxial using one S/PDIF digital coaxial audio cable.  
Digital optical using one TOSLINK digital optical audio cable.  
3. Optionally, connect an RS-232 device to the sender unit using a user  
supplied RS-232 cable.  
NOTE: The DVI 1600HD Extender system will not cross the transmit and  
receive lines as a null-modem adapter would. All pins will pass straight  
through from one point to the other.  
4. Connect 2 pairs (4 strands) of LC terminated single or multi-mode ber  
optic cables to the sender unit. Connect the opposite ends of the ber optic  
cabling to the receiver unit’s ber optic receptacles.  
5. Connect a DVI or HDMI (using a DVI to HDMI adapter/cable) capable device  
to the DVI output of the DVI 1600HD Extender receiving unit using a user  
supplied cable.  
6. Connect up to 3 of the audio outputs to audio receiving devices. Available  
outputs are as follows:  
Analog stereo using one pair of RCA analog stereo cables.  
Digital coaxial using one S/PDIF digital coaxial audio cable.  
Digital optical using one TOSLINK digital optical audio cable.  
NOTE: All outputs are active regardless of the selected input on the sender.  
However, multi-channel content that is being sent by the digital connectors  
will not be output by the analog stereo output.  
7. Optionally, connect an RS-232 device to the receiver unit using a user  
supplied RS-232 cable.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING AND OPERATING THE DVI 1600HD EXTENDER  
How to Connect the DVI 1600HD Extender  
8. Connect the included 12V DC power supplies to both the sending and  
receiving units and open wall power sockets.  
9. Power on the endpoint device rst and then the source device.  
Operating the DVI 1600HD Extender  
The DVI 1600HD can be set in either DVI or HDMI mode.  
DVI mode has a maximum range of 6560 feet (2 kilometers) with single-  
mode ber optic cable and a range of 1640 feet (500 meters) using multi-  
mode ber optic cable. DVI mode does not support HDCP. Maximum  
supported resolution is 1920 x 1200. To select this mode, set the DVI/HDMI  
mode selector switch on the front panel of the sender to DVI.  
HDMI mode has a maximum range of 650 feet (200 meters) with both  
single and multi-mode ber optic cables. HDMI mode does support HDCP.  
Maximum supported resolution is 1080p Full HD. To select this mode, set  
the DVI/HDMI mode selector switch on the front panel of the sender to  
HDMI.  
The audio source used for transmitting to the receiver can be selected from  
the front panel of the DVI 1600HD Extender sending unit. Use the audio input  
selector button to cycle between the 3 available inputs. The inputs are cycled as  
follows:  
Audio (analog stereo)  
Coax (digital S/PDIF)  
Optical (digital TOSLINK)  
All audio outputs on the receiver are constantly active. This means that analog  
signal are converted to digital and digital signal are converted to analog. The only  
exception to this is multi-channel digital audio, which will not be output through  
the analog stereo output.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
Video Amplier Bandwidth ....................................................................... 165 MHz  
Maximum Resolution ................................................................. 1920x1200/1080p  
Input Connector (analog audio) ...................................... 1 x Pair RCA L+R stereo  
Input Connector (digital audio) ............................. 1 x S/PDIF coaxial digital audio  
Input Connector (digital audio) .......................... 1 x TOSLINK optical digital audio  
Input Connector (digital video) .......................................... 1 x DVI, 29-pin Female  
Output Connector (analog audio) ................................... 1 x Pair RCA L+R stereo  
Output Connector (digital audio) ....................................... 1 x S/PDIF digital audio  
Output Connector (digital audio) ........................ 1 x TOSLINK optical digital audio  
Output Connector (digital video) ........................................ 1 x DVI, 29-pin Female  
RS232 Connectors (Input, Output) ........................................ 9-pin Serial, Female  
Link Connectors ............... 4-strand LC-LC ber optic cable (single or multi-mode)  
Input Video Signal Voltage ................................................................. 1.2 Volts p-p  
Input DDC Signal Voltage ............................................................ 5 Volts p-p (TTL)  
Power Supply/Power Consumption ............................ 12V DC x 2 / 72 Watts total  
Dimensions ........................................................................ 10.3”W x 1.2”H x 5.1”D  
Operating Temperature ............................................................................ 0 to 50 C  
Relative Humidity ....................................................................................... 10-85%  
Shipping Weight ............................................................................................ 5 lbs.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Clarion CD Player DB156 User Manual
Compaq Computer Drive SDLT 110 User Manual
Compaq Personal Computer DESKTOP 330 User Manual
Cooper Lighting Indoor Furnishings CC7 User Manual
EarthStone Oven 110 Modular User Manual
Electro Voice Microphone 634B User Manual
Fisher Price Musical Toy Instrument J9632 User Manual
Garland Griddle GXM2 User Manual
GE Air Conditioner AEM10 User Manual
GE Trash Compactor GCG1580LSS User Manual