™
Monogram.
ZGU36N6DSS—36" Professional Gas Cooktop
Dimensions and Specifications (in inches)
This cooktop is factory set for natural gas and has 6 gas burners.
Cooktop
1/2" Above Adjacent
Countertops.
Liquid Propane Gas Model Also Available:
ZGU36L6YSS–6 gas burners.
Installation Options:
This cooktop can be installed in standard 24" or deeper 25" cabinets.
• In 24" deep cabinets, the front of the cooktop will project
approximately 1-7/8" beyond the front of the countertop.
Front Projects Outward as Shown
From Standard Depth Cabinets.
• In 25" deep cabinets, the cooktop will be flush with the front of the
countertop
Cooktop
1/2" Above Adjacent
Countertops.
• The stainless surface of the cooktop will be 1/2" higher than adjacent
countertop.
Accessory Requirements:
All models require the installation of a backguard. A backguard should
be ordered at the same time as the cooktop. Both should be
on site before cabinetry has been installed.
Flush With Cabinet Front
Order one backguard:
ZXC1B36YSS–1-1/2" high backguard (required for island installations)
ZXC12B36YSS–12" high backguard
Front Flush With Cabinets - a Minimum
of 25-3/4" Cabinet Depth Required
ZXC22B36YSS–22" high backguard with warming shelf (2 piece)
26-5/8"
21-1/4"
High
Back
Low Back
12"
Countertop
Level
8-7/16"
ZXC22B36YSS
1/2"
3" to Center Line
of Gas Inlet
ZXC12B36YSS
22-3/4"
23-1/4"
2-1/2"
1/2"
Cabinet Face - Projecting Control Panel
Cabinet Face - Flush Control Panel
ZXC1B36YSS
®
™
For answers to your Monogram, GE Profile or
GE appliance questions, visit our website at
GEAppliances.com or call
®
GE Answer Center service, 800.626.2000.
Listed by
Underwriters
Laboratories
R
Specification Created 7/01
Download from Www.Somanuals.com. All Manuals Search And Download.
™
Monogram.
ZGU36N6DSS—36" Professional Gas Cooktop
Dimensions and Specifications (in inches)
Cutting the Countertop Opening:
Measure carefully when cutting the countertop.
Make sure sides of the opening are parallel.
35-7/8"
26-5/8"
8-7/16"
™
• This Monogram gas cooktop is designed to
fit in 36" or larger base cabinet.
22-3/4"
• This cooktop requires 8" free space below
the countertop.
1/2"
2-1/2"
34-7/8"
• The cooktop is designed to hang from the
countertop from its side flanges.
• Smooth any rough edges on the countertop
before installing cooktop.
–Formica countertop edges must be finished.
8"
The countertop must be strong enough to support
the weight of the cooktop.
• Support cleats can be secured to cabinet
sides OR build a support deck or box inside
the cabinet which will support the weight
of the cooktop.
–Build the support box using a solid material,
cut a 5" x 5" square in the left rear corner for
the gas inlet and power cord clearances.
Installation Information:
Before installing, consult installation instructions
(Pub. No. 49-8812) packed with product for current
dimensional data.
Adjacent Cabinet
and Countertop
2"
17"
16"
Locate gas inlet on
Counter Sunk
Screws
back wall or on floor
2" from back wall
®
™
For answers to your Monogram, GE Profile or
GE appliance questions, visit our website at
GEAppliances.com or call
®
GE Answer Center service, 800.626.2000.
Listed by
Underwriters
Laboratories
R
Specification Created 7/01
Download from Www.Somanuals.com. All Manuals Search And Download.
™
Monogram.
ZGU36N6DSS—36" Professional Gas Cooktop
Features and Benefits
• Stainless Steel Model
• Natural Gas
• 36” Gas Cooktop
• Six (15,000/500 BTU) Dual-Ring Gas Burners
• Cast-Iron, Porcelanized Burner Grates
• Stainless Steel, Slide-Out Drip Tray
• Electronic Ignition with Automatic Re-Ignition
• Commercial-Style Controls
• Model ZGU36N6DSS—Natural Gas
• Model ZGU36L6DSS—Liquid Propane Gas
Specification Created 7/01
Download from Www.Somanuals.com. All Manuals Search And Download.
|