USER’S MANUAL
PDS4207W-H/PDS4207E-H
42” WIDE PLASMA DISPLAY
Contents
Page
Page
Before Use
Adjustments
Video Mode
• Video Adjustments ·········································· 24-25
• Screen Adjustments ········································ 26-27
• Input Source Adjustments ······························· 28-29
• Other Adjustments ·········································· 30-31
• Safety Precautions ·········································· 3-5
• Features ····························································· 6
• Accessories························································ 7
• What You Should Know ·································· 8-9
• Preventing Equipment from Falling ·················· 10
RGB Mode
Usage
• Video Adjustments ·········································· 32-33
• Screen Adjustments ········································ 34-35
• Input Source Adjustments ······························· 36-37
• Other Adjustments ·········································· 38-39
• Names of Parts and Their Functions ········· 11-14
• Basic Operations·············································· 15
• Viewing Wide Screen (Video Mode) ··········· 16-17
• Viewing Wide Screen (RGB Mode)············· 18-19
Others
Handy Functions
• Personal Computers that Can be Connected ······ 40
• Optional Products ················································ 41
• Specifications ··················································42-43
• Care and Maintenance········································· 44
• On-Screen Display Setting······························· 20
• Internal Speaker Setting ·································· 21
• WHITE BALANCE Setting ······························· 22
• DPMS and Display Language Setting·············· 23
Before using the display, read this manual carefully so that you know how to use the display correctly.
Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precau-
tions.
Keep this manual where the user can see it easily.
Installation and removal require special expertise. Consult your product dealer for details.
FUJITSU GENERAL LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
IMPORTANT INFORMATION
WARNING: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN OR MOISTURE.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to
assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the following
basic rules for its installation, use and service. Please read these “Important Safeguards” carefully before use.
–
–
–
–
–
All the safety and operating instructions should be read before the product is operated.
The safety and operating instructions should be retained for future reference.
All warnings on the product and in the operating instructions should be adhered to.
All operating instructions should be followed.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
–
–
Do not use attachments not recommended by the product manufacturer as they may be hazardous.
Do not use this product near water. Do not use immediately after moving from a low temperature to high
temperature, as this causes condensation, which may result in fire, electric shock, or other hazards.
–
–
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury
to a child or adult, and serious damage to the product. The product should be mounted according to the
manufacturer’s instructions, and should use a mount recommended by the manufacturer.
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and
uneven surfaces which may cause the product and cart to overturn, damaging equipment or
causing possible injury to the operator.
–
Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the
product and protect it from overheating. These openings must not be blocked or covered. (The openings
should never be blocked by placing the product on bed, sofa, rug, or similar surface. It should not be
placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the
manufacturer’s instructions have been adhered to.)
For proper ventilation, separate the product from other equipment, which may prevent ventilation and keep
distance more than 10cm.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
–
–
This product should be operated only with the type of power source indicated on the label. If you are not
sure of the type of power supply to your home, consult your product dealer or local power company.
This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you
are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not
defeat the safety purpose of the grounded plug.
–
–
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them. Pay particular attention to cords at doors, plugs, receptacles, and the point where
they exit from the product.
For added protection of this product during a lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent
damage to the product due to lightning and power line surges.
–
–
Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.
Never push objects of any kind into this product through openings as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the
product.
–
–
Do not attempt to service this product yourself as opening or removing covers may expose you to danger-
ous voltages and other hazards. Refer all service to qualified service personnel.
Unplug this product from the wall outlet and refer service to qualified service personnel under the following
conditions:
a) When the power supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen on the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the Operation Manual, as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified technician to restore the product to
its normal operation.
e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance – this indicates a need for service.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
–
When replacement parts are required, be sure the service technician has used replacement parts speci-
fied by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
–
–
–
–
–
Upon completion of any service or repairs to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating condition.
The product should be placed more than one foot away from heat sources such as radiators, heat regis-
ters, stoves, and other products (including amplifiers) that produce heat.
When connecting other products such as VCR’s, and personal computers, you should turn off the power of
this product for protection against electric shock.
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or
gas lighters that present special hazards when over heated.
Use only the accessory cord designed for this product to prevent shock.
The power supply voltage rating of this product is AC100-240 V, the power cord attached conforms to the
following power supply voltage. Use only the power cord designated by our dealer to ensure safety and
EMC.
When it is used by other power supply voltage,
power cable must be changed.
Power cord
Consult your product dealer.
Power supply voltage: AC100-125V
AC 200-240 V
AC 240 V (SAA TYPE)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
VERTICAL INSTALLATION
The dynamic vertical screen is obtained by installing the Plasmavision vertically.
PLASMAVISION SUPPORTS
The VGA full display and SVGA and XGA compression display suitable for personal computers
A VARIETY OF INPUT TERMINALS
The high quality image color difference signals such as DVD etc. can be input in addition to the video, S-video, and RGB.
CONVENIENT POWER MANAGEMENT FUNCTION
DPMS (Display Power Management Signaling) automatically minimizes power consumption.
FIVE TYPES OF WIDE DISPLAY
Five types of wide display are supported: WIDE 1, WIDE 2, ZOOM 1, ZOOM 2 and normal display (4:3).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ACCESSORIES
Checking Accessories
Cable clamper × 2
Power cord
PDS4207W-H × 3
PDS4207E-H × 1
Remote controller × 1
AA battery × 2
USER’S
MANUAL
Screw A (10 mm)
Screw B (20 mm)
A
B
User’s Manual × 1
Bracket × 2 (2 types)
Screw × 2 (2 types)
Cable clampers
• The accessory cable clampers are for fastening the connected
signal cables and a power cable. When installing this display
on a wall or ceiling, insert the cable clampers into the holes on
the rear of the display.
Bundle connecting cables so
that they lead downwards, as
in the illustration.
Cable clamper
(Attach as in the illustration.)
Connecting to External Equipment
Cables for connecting external equipment must be
purchased separately.
Connectors
AUDIO INPUT
VIDEO INPUT
S-VIDEO INPUT
COMPONENT VIDEO INPUT
RGB 1 INPUT
RGB 2 INPUT
RS-232C
Pin jack
BNC
S terminal
BNC
RGB 2
RGB 1
SYNC SW
SYNC SW
15-pin mD-sub
BNC
TTL/ANALOG (75Ω)
TTL/ANALOG (75Ω)
RGB 2 INPUT
9-pin D-sub
AUDIO INPUT
RS-232C
When connecting separately pur-
chased BNC terminals, conversion
connectors are required between the
pin jacks and the BNC terminals, so
purchase these also.
RGB 1 INPUT
VIDEO INPUT
COMPONENT
VIDEO INPUT
(color difference
input)
S-VIDEO
INPUT
Cables connecting the personal com-
puter vary according to the type of
machine, so consult your product
dealer.
Display
(to analog RGB
output terminal)
Display
(to analog
RGB
output
terminal)
To audio
output
terminal
To video
output
terminal
To S-video
output
terminal
To RS-232C
terminal
To component
video output
terminal
Connecting to PC
Connecting to AV equipment
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WHAT YOU SHOULD KNOW
POINTS ABOUT USAGE
• When installing the display, use the optional desktop stand, wall-mounting unit, or ceiling mounting unit. Have
the installation done by your product dealer.
• When installing the display, refer to the installation manuals for the options. Further, be sure that the display does
not lean to the side or backward.
• Place the power cord and connection cables in a corner of the wall or floor so that they do not get caught on
anything.
• For good heat dissipation, the Plasmavision requires at least the space shown in the figure below.
• The installation location must have an ambient temperature range of 0 °C – 40 °C.
See page 41 for optional parts.
When desktop stand used
Front view
Side view
Upper
5 cm
20 cm
15cm
15cm
Left
Right
Wall
5 cm
Floor
Floor
Desktop stand
When wall-mounting unit used (horizontally)
When ceiling-mounting
unit used
Front view
Side view
Side view
Ceiling
Upper
20 cm
Ceiling
Wall mounting unit
20 cm
mounting unit
10 cm
Right
10 cm
Left
Wall
Wall
10 cm
Lower
5 cm
5 cm
8
Download from Www.Somanuals.com. All Manuals Search And Download.
When wall-mounting unit used (vertically)
Front view
Side view
Upper
Wall mounting
(vertical usage)
15 cm
Wall
10 cm
Left
10 cm
Right
10 cm
Lower
5 cm
Power lamp
• When mounting the Plasmavision vertically, make sure that the power lamp is at the lower right.
Notes
• Do not display the same picture (pattern) continuously for a long time. Doing so raises the brightness of the picture and may
cause after-images.
• Looking at the picture continuously for a long time can tire the eyes. View the display from a reasonable distance (about three
times the length of the screen).
If something is wrong with the Plasmavision internally, the built-in protection circuit will cut the power automatically. If so, the
power lamp will blink in red, indicating a malfunction.
• If the power lamp is blinking red, it is warning that something is wrong with the Plasmavision. There is a danger of fire or
electrical shock, so be certain to unplug the power cord and contact your product dealer. (See P44)
• The plasma display panel has been built using extremely precise and sophisticated technologies. More than 99.99% of its
pixels are effective. However, a minute number of pixels are missing or constantly lit.
• Do not install the Plasmavision where there will be interference between it and other AV equipment. (If interference from
electromagnetic waves causes jumbled images, noise or malfunctioning of the infrared remote control, change the installation
location.)
• When the display is installed vertically, only still images appears.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PREVENTING EQUIPMENT FROM FALLING
To prevent accidents and to ensure safety during disasters such as earthquakes, take precautions to ensure
that the equipment cannot topple over.
ATTACHING TO WALL OR COLUMN
• Remove the display cover from both sides. Then, for both left and right sides, use screw A (10 mm) to attach
bracket A to the screw hole (highest of the five holes on the side).
• For both left and right sides, use screw B (20 mm) to attach bracket B to the wall. Then tie brackets A and B with
a strong rope so that the display panel does not topple over.
• This arrangement is stable when the rope is horizontal or pulled downward.
How to remove display cover
Push,
then pull
the cover
with the
fingers.
Strong rope (not supplied)
Screw B (20 mm)
Display cover
Screw A (10 mm)
Display cover
Bracket A
Bracket B
Display
ATTACHING TO DESKTOP STAND
• Fasten the screws supplied with the desktop stand into their holes at the rear of the desktop stand. (2 holes)
• For details, refer to P-42TT01 User‘s Manual for the desktop stand.
Two
places
Screw B (20 mm)
The screws are supplied with the desktop stand.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS AND THEIR FUNCTIONS
Front view
Bottom view
VOLUME
WIDE
(SET)
MENU
(ADJUST)
1
3
Operation panel
Power lamp
• Shows the power status, ON or OFF.
• Lit (red)····Standby
• POWER button: Switches the power on or off.
• MODE button: Selects the input mode.
• MENU button: For adjusting the video and audio to
your taste.
• Lit (green)····Power on
• Blinking (red)····Internal abnormality. Be certain to
unplug the power cord.
• VOLUME (ADJUST)
buttons: Normally used for adjusting the volume.
During adjustments, these buttons are
used for making adjustments from the
menu screen.
2
Remote control receiver
• Receives the signals from the remote controller.
• WIDE (SET) button: Normally used for selecting the
desired wide screen.
During adjustments, this is the
(SET) button for setting the
menu screen.
4
Internal speakers
• Output the audio connected to the audio input termi-
nals.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS AND THEIR FUNCTIONS
Rear view
RGB 1
RGB 2
SYNC SW
TTL
ANALOG
(75Ω)
INPUT
B
AUDIO
INPUT
VIDEO S-VIDEO CONPONENT-VIDEO
SYNC SW
R
G
H
V
INPUT INPUT
INPUT
TTL
R
L
Y
Pb/B-Y Pr/R-Y
ANALOG INPUT
RS232C
(75Ω)
5
6
11
12
RS-232C input terminal (RS-232C)
Power switch
• When pressed, power lamp
• Connects to the computer RS-232C output terminal.
1
lights red, and the
power can be turned on or off by the remote control-
ler. When this switch is pressed again, the power is
Audio input terminals (AUDIO INPUT)
• Connects to the audio output terminal of a video deck
or similar device.
cut and power lamp
goes off.
1
Power input terminal
13
RGB 1 Sync switch (RGB 1 SYNC SW TTL/ANALOG
(75 Ω))
• Firmly insert the accessory power cord as far as it will
go into the power input terminal.
• For switching the RGB 1 terminals' 13-pin horizontal
sync and 14-pin vertical sync to terminate with 75 Ω.
When an analog synchronous signal is input at the
RGB 1 terminal, be sure that this switch is set to ANA-
LOG (75 Ω). For connection to a personal computer,
be sure it is set to TTL.
• Firmly push the power cord plug as far as it will go
into the power socket. (100–240 VAC)
7
8
9
Video input terminal (VIDEO INPUT)
• Connects to the video output terminal of a video deck
or video disc player.
14
RGB 2 input terminal (RGB 2 INPUT)
• Connects to the computer monitor's (analog RGB)
output terminal.
S video input terminal (S-VIDEO INPUT)
• Connects to the S video output terminal of a video
deck or video disc player.
Signals from VGA to XGA can be displayed.
Cables connecting the personal computer vary ac-
cording to the type of machine, so consult your prod-
uct dealer.
Component video input terminal (COMPONENT
VIDEO INPUT)
• Connects to the component video output terminal of
DVD and similar devices.
15
RGB 2 Sync switch (RGB 2 SYNC SW TTL/ANALOG
(75 Ω))
10
RGB 1 input terminal (RGB 1 INPUT)
• Connects to the computer monitor's (analog RGB)
output terminal.
• For switching the RGB 2 terminals' H terminal hori-
zontal sync and V terminal vertical sync to terminate
with 75 Ω.
Signals up to SVGA can be displayed.
Cables connecting the personal computer vary ac-
cording to the type of machine, so consult your prod-
uct dealer.
When an analog synchronous signal is input at the
RGB 2 terminal, be sure that this switch is set to ANA-
LOG (75 Ω). For connection to a personal computer,
be sure it is set to TTL.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A Remote controller
• WIDE button
• POWER button
Switches the power on or off.
• MODE button
Selects the input mode.
• MENU button
P15
P16–19
For selecting the desired wide
screen
P15
• VOLUME buttons
P15
For adjusting the volume
P20–39
• SET button
P20–39
For adjusting the picture and sound
to your taste
For setting the menu items and ad-
justment items
• ADJUST button
P20–39
For making adjustments from the
menu screen
• For the adjustment menu, see the pages below.
Handy functions (on-screen display, speaker, white balance, DPMS, language) ····························
VIDEO mode adjustment menu ·······································································································
RGB mode adjustment menu···········································································································
P20–23
P24–31
P32–39
Points about usage
• Do not subject the remote controller to strong mechanical shocks. Doing so can cause malfunction.
• D o not get the remote controller wet or leave it in a hot location or near any heat source such as a heater. Doing so can cause
malfunction or deformation.
• Do not wipe the remote controller with volatile liquids such as benzine or paint thinner.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS AND THEIR FUNCTIONS
Handling the remote controller
Loading the batteries
Press on the cover and slide
in the direction of the arrow.
Load two AA batteries, taking
care that the + and – ends face
the correct direction.
Close the cover until it clicks.
1
3
2
Reception range of remote controller
Upper
20°
20°
Lower
30° 30°
Left
Right
5m (Front)
Points about usage
• Use the remote controller pointed in the direction of the remote control reception section, making sure there is no obstruction.
• The remote controller may not operate correctly in a room using high-frequency fluorescent lights. If this happens, move away
from those lights.
• After it has been used for a long time, the remote controller batteries go flat. When this happens, replace them with new ones.
• When replacing the batteries, make sure they are the same type as the originals.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
PREPARATION
Switch on the main power switch.
Press the main POWER SWITCH at the rear. The power lamp lights (red).
Pressing this switch again switches off the power.
Press the POWER button.
1
The power lamp changes from red
VIDEO
to green.
Example: VIDEO mode
Select the video mode.
2
Select the video mode with the
RGB 1
MODE button.
Pressing the MODE button moves
the mode to the next item as be-
low.
RGB 1
RGB 2
VIDEO
Example: When RGB 1
selected
COMP. VIDEO
S-VIDEO
Mode display
Adjusting the volume
Use the VOLUME buttons to adjust the
volume .
This operation can also be done
using the buttons on the Display’s
operation panel.
+ button····Raises the volume.
– button····Lowers the volume.
The current volume setting is memo-
rized even when the power is
switched off.
Mode display
• COMP.VIDEO stands for component video mode.
• When the speaker setting (see p.21) is OFF, SPEAKER OFF will be displayed if the VOLUME button is pressed.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWING WIDE SCREEN (VIDEO MODE)
SWITCHING THE WIDE SCREEN AUTOMATICALLY
Press the WIDE button.
1
The current viewing mode is dis-
played.
NORMAL
Example: NORMAL mode
With the WIDE button,
2
select AUTO mode.
Pressing the WIDE button moves
the mode to the next item as be-
low.
AUTO
NORMAL
ZOOM2
AUTO
WIDE1
WIDE2
ZOOM1
Example: When AUTO is selected
When AUTO is selected, the wide
screen is automatically selected
according to the contents of the
video.
AUTO mode cannot be selected in COMPONENT VIDEO mode.
This operation can also be done
using the buttons on the Display’s
operation panel.
In AUTO mode, the contents of the video software are detected and the display
switches to the optimum wide screen as follows:
• WIDE 1
The appropriate wide screen for ordi-
nary video (4:3) software
When AUTO mode is selected
W i t h c e r t a i n s o f t w a r e , t h e
Plasmavision may not operate cor-
rectly in AUTO mode. If so, use the
WIDE button to switch to the most
appropriate screen size.
Ordinary video (4:3 video)
Vertically wide video
WIDE 1
WIDE 2
• WIDE 2
Appropriate for 16:9 video compressed
to horizontally wide 4:3 video
Examples:
• Some game software will invoke the
zoom screen (where the top and
bottom of the screen are missing).
• For some 4:3 video software, in
scenes where the top and bottom
are extremely dark, the display may
switch to the zoom screen.
• ZOOM 1
Appropriate for horizontally wide video
software; a normal picture appears
with the top, bottom, left, and right
enlarged.
ZOOM 1
Horizontally wide video
• ZOOM 2
• For video software that switches to
the zoom screen automatically, the
display may take a few moments to
switch to the zoom screen for the
first dark scene.
For horizontally wide video software
with subtitles, the display is automati-
cally adjusted to compress the subtitle
section so that it is not cut out.
a
coo coo flew over the one’s next
a
coo coo flew over the one’s next
Horizontally wide video
with subtitles
NORMAL mode
ZOOM 2
Wide screen
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE DESIRED WIDE SCREEN SIZE
Press the WIDE button.
1
The current viewing mode is displayed.
NORMAL
Use the WIDE button to select the desired screen size.
2
Pressing the WIDE button moves the mode to the next item as below.
NORMAL
AUTO
WIDE1
WIDE2
ZOOM1
ZOOM2
WIDE1
Select the wide screen size to suit the program.
Example: When WIDE 1 is selected
AUTO mode cannot be selected in COMPONENT VIDEO mode.
SCREENS ASPECT RATIO
The aspect ratios (horizontal to vertical size ratios) for broadcasts and
videos are as follows:
4
16
1.85
2.35
1
1
3
9
• VHF/UHF broadcasts
• Vistavision size software
• Vistavision size software
• Cinemavision size software
Even when ZOOM 1 or ZOOM 2 is set for Vistavision size or Cinemavision size software that is predominantly
used for movie software, dark areas may remain at the top and bottom.
Points about usage
• The Plasmavision can be switched to a variety of screen modes. When the selected mode has a different picture aspect ratio
from the media to be viewed, the picture will appear different from the original. Keep this in mind when selecting the screen
mode.
• Note that use of a wide select function to change the screen size or aspect ratio during commercial use or for public viewing
in a coffee shop, hotel, or the like, may infringe on copyrights protected by the copyright law.
To respect the intent of the creators of the original video, use NORMAL mode.
• If the wide select function is used to display non-wide screen conventional (normal) 4:3 video software over the entire screen,
the picture will be deformed with part of the edge not visible.
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWING WIDE SCREEN (RGB MODE)
SETTING THE DESIRED WIDE SCREEN SIZE
Press the WIDE button.
1
The current viewing mode is dis-
played.
NORMAL
Example: NORMAL
Use the WIDE button to
2
select the desired screen
size.
Pressing the WIDE button moves
the mode to the next item as be-
low.
NORMAL
WIDE
WIDE
Example: When WIDE is selected
This operation can also be done
using the buttons on the Display’s
operation panel.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
WIDE SCREEN MODES (RGB MODE)
• When the screen is vertically wide
WIDE
Vertically wide video
Points about usage
• Note that use of a wide select function to change the screen size or aspect ratio during commercial use or for public viewing
in a coffee shop, hotel, or the like, may infringe on copyrights protected by the copyright law.
• To respect the intent of the creators of the original video, use NORMAL mode.
• The RGB mode means both RGB 1 and RGB 2 modes.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDY FUNCTIONS
ON-SCREEN DISPLAY SETTING
Select COMMON SET-
TINGS from the VIDEO
MENU screen.
1
VIDEO MENU
1) Press the MENU button.
COMMON SETTINGS
PICTURE
2) With the ADJUST button,
select COMMON SETTINGS.
POSITION/SIZE
SOURCE
OTHERS
3) Set by pressing the SET
button.
MENU
ENTER
QUIT
SELECT
SET
Example: When COMMON SETTINGS is
selected
COMMON SETTINGS can be
set in the same way from any
mode menu.
Select the adjustment
item.
2
With the SET button, select DIS-
PLAY.
Pressing the SET button moves
the selection to the next item as
below.
DISPLAY
ON/OFF
MENU
NEXT
RETURN SET
SELECT
This operation can also be done
using the buttons on the Display’s
operation panel.
DISPLAY
LANGUAGE
SPEAKER
DPMS
WHITE
BALANCE
Example: When DISPLAY is selected
DPMS is not displayed in the
RGB 2 mode.
Set the desired setting.
3
Pressing the ADJUST button
moves the selection to the next
item as below.
DISPLAY
ON/OFF
MENU
NEXT
RETURN SET
SELECT
ON···· The mode is displayed on
the screen for a few sec-
onds when the power is
first switched on and when
the mode is switched.
Example: When ON is selected
OFF···The mode is not displayed.
To complete adjustments
Press the MENU button to return to the VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERNAL SPEAKER SETTING
Select COMMON SETTINGS from the VIDEO MENU screen.
1
VIDEO MENU
1) Press the MENU button.
COMMON SETTINGS
2) With the ADJUST button, select COMMON SETTINGS.
3) Set by pressing the SET button.
PICTURE
POSITION/SIZE
SOURCE
OTHERS
MENU
ENTER
QUIT
SELECT
SET
COMMON SETTINGS can be set in the same way from any mode menu.
Example: When COMMON SETTINGS is
selected
Select the adjustment item.
2
With the SET button, select SPEAKER.
Pressing the SET button moves the selection to the next item as below.
SPEAKER
ON
DISPLAY
SPEAKER
DPMS
WHITE
BALANCE
MENU
NEXT
RETURN SET
SELECT
LANGUAGE
DPMS is not displayed in the RGB 2 mode.
Example: When SPEAKER is selected
Set the internal speakers.
3
Select with the ADJUST button.
Pressing the ADJUST button moves the selection to the next item as be-
low.
SPEAKER
ON
ON
OFF
RGB 1
RGB 2
VIDEO
S-VIDEO
MENU
NEXT
RETURN SET
SELECT
COMP. VIDEO
Example: When ON is selected
To complete adjustments
Press the MENU button to return to the VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
Adjustment items
• Pressing the SET button moves the selection to the next item.
ON: When using the internal speakers regardless of mode
RGB 1: When using the internal speakers in RGB 1 mode only
RGB 2: When using the internal speakers in RGB 2 mode only
VIDEO: When using the internal speakers in VIDEO mode only
S-VIDEO: When using the internal speakers in S-VIDEO mode only
COMP.VIDEO: When using the internal speakers in COMPONENT VIDEO mode only
OFF: When not using the internal speakers
If there is no operation for 60 seconds, the screen display goes off.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDY FUNCTIONS
WHITE BALANCE SETTING
Select COMMON
1
SETTINGS from the
VIDEO MENU screen.
VIDEO MENU
1) Press the MENU button.
COMMON SETTINGS
PICTURE
2) With the ADJUST button, se-
lect COMMON SETTINGS.
POSITION/SIZE
SOURCE
OTHERS
3) Set by pressing the SET
button.
MENU
ENTER
QUIT
SELECT
SET
Example: When COMMON SETTINGS is
selected
COMMON SETTINGS can be
set in the same way from any
mode menu.
Select the adjustment
item.
2
With the SET button, select
WHITE BALANCE.
Pressing the SET button moves
the selection to the next item as
below.
WHITE BALANCE
0
MENU
NEXT
RETURN SET
SELECT
This operation can also be done
using the buttons on the Display’s
operation panel.
DISPLAY
LANGUAGE
SPEAKER
DPMS
WHITE
BALANCE
Example: When WHITE BALANCE is selected
DPMS is not displayed in the
RGB 2 mode.
Adjust to the desired
white balance.
3
With the ADJUST button, select
the desired WHITE BALANCE.
WHITE BALANCE
0
MENU
NEXT
RETURN SET
SELECT
Select the tint with the ADJUST
button.
Example: When 0 is selected
Pressing the ADJUST button
moves the selection to the next
item as below.
0
3
1
2
To complete adjustments
Press the MENU button to return to the VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DPMS AND DISPLAY LANGUAGE SETTING
DPMS SETTING
The time until the power conservation function operates can
be set.
Select with the ADJUST button.
Pressing the ADJUST button moves the selection to the next item as below.
DPMS
MENU
OFF
1MIN
4MIN
2MIN
3MIN
OFF
NEXT
RETURN SET
SELECT
5MIN
DPMS does not function in the RGB 2 mode.
Example: When OFF is selected
LANGUAGE (DISPLAY LANGUAGE) SETTING
The language for the display can be set.
Select with the ADJUST button.
Pressing the ADJUST button moves the selection to the next item as below.
LANGUAGE
ENGLISH-A
ENGLISH-A
ENGLISH-B
DEUTSCH
MENU
NEXT
RETURN SET
SELECT
FRANÇAIS
Example: When ENGLISH-A is selected
Note: The setting title and guidance display also change.
Setting titles
LANGUAGE
LANGUE
LANGUAGE
SPRACHE
Adjustment items
• An adjustment item is selected each time the SET button is pressed.
DPMS
DPMS stands for Display Power Management Signaling. It is a function that automatically reduces the amount of power
consumed by the monitor.
When the power is on, if no signal is input within the set time, the power management function is triggered, the monitor screen
is automatically switched off, and the monitor goes on standby.
This signal wait time can be set from 1 to 5 minutes in units of one minute. Also, the power management function can be
switched off. (The factory setting is OFF.)
* DPMS does not function in the RGB 2 mode.
This display has a five-language on screen menu.
ENGLISH-A --------------- American English
ENGLISH-B --------------- British English
DEUTSCH ----------------- German
FRANÇAIS ---------------- French
If there is no operation for 60 seconds, the screen display goes off.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO ADJUSTMENTS (VIDEO MODE)
EXAMPLE: ADJUSTING THE BRIGHTNESS
Select PICTURE from the
1
VIDEO MENU screen.
VIDEO MENU
COMMON SETTINGS
1) Press the MENU button.
PICTURE
2) With the ADJUST button, se-
lect PICTURE.
POSITION/SIZE
SOURCE
OTHERS
MENU
ENTER
QUIT
SELECT
SET
3) Set by pressing the SET
button.
Example: When PICTURE is selected
Select the adjustment
item.
2
With the SET button, select
BRIGHTNESS.
Pressing the SET button moves
the selection to the next item as
below.
BRIGHTNESS
MENU
NEXT
RETURN SET
ADJUST
BRIGHTNESS
SHARPNESS
CONTRAST
TINT COLOR
Example: When BRIGHTNESS is selected
This operation can also be done
using the buttons on the Display’s
operation panel.
Adjust to the desired pic-
ture.
3
button····Makes the picture
brighter.
button····Makes the picture
BRIGHTNESS
darker.
MENU
NEXT
RETURN SET
ADJUST
To adjust multiple items, repeat
Steps 2 and 3.
Example: When the
button is pressed
To complete adjustments
Press the MENU button to return to the VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
The adjustments are saved for each video mode (VIDEO mode, S-VIDEO
mode, and COMPONENT VIDEO mode).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO ADJUSTMENT ITEMS
BRIGHTNESS
Screen brightness can be adjusted.
button: Makes the picture brighter.
BRIGHTNESS
button: Makes the picture darker.
MENU
NEXT
RETURN SET
ADJUST
CONTRAST
Screen contrast (difference between dark and light) can be adjusted.
button: Makes the contrast stronger.
CONTRAST
button: Makes the contrast weaker.
MENU
NEXT
RETURN SET
ADJUST
COLOR (color saturation)
Color saturation can be adjusted.
button: Makes the color more saturated.
COLOR
MENU
button: Makes the color less saturated.
NEXT
RETURN SET
ADJUST
TINT
Color tint can be adjusted.
button: Makes the tint greener.
TINT
button: Makes the tint more purple.
MENU
NEXT
RETURN SET
ADJUST
SHARPNESS
Picture sharpness can be adjusted.
button: Makes a sharper picture.
SHARPNESS
button: Makes a softer picture.
MENU
NEXT
RETURN SET
ADJUST
Adjustment items
• Pressing the SET button moves selection to the next item.
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.
• The adjustments are saved for each video mode.
• TINT functions only in NTSC mode.
If there is no operation for 60 seconds, the screen display goes off.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN ADJUSTMENT (VIDEO MODE)
EXAMPLE: ADJUSTING THE SCREEN VERTICAL
POSITION
Select POSITION/SIZE
1
from the VIDEO MENU
screen.
VIDEO MENU
COMMON SETTINGS
1) Press the MENU button.
PICTURE
POSITION/SIZE
SOURCE
2) With the ADJUST button,
select POSITION/SIZE.
OTHERS
MENU
ENTER
QUIT
SET
SELECT
3) Set by pressing the SET
button.
Example: When POSITION/SIZE is
selected
Select the adjustment
item.
2
With the SET button, select VER-
TICAL POSITION.
Pressing the SET button moves
the selection to the next item as
below.
VERTICAL POSITION
0
MENU
NEXT
RETURN SET
ADJUST
VERTICAL
POSITION
HEIGHT
Example: When VERTICAL POSITION is
selected
This operation can also be done
using the buttons on the Display’s
operation panel.
HORIZONTAL
WIDTH
HORIZONTAL
POSITION
Adjust with the ADJUST
button.
3
button····Moves the screen up.
button····Moves the screen
VERTICAL POSITION
2
down.
MENU
NEXT
RETURN SET
ADJUST
For the adjustment range, see the
opposite page.
To adjust multiple items, repeat
Example: When the
button is pressed
steps 2 and 3.
To complete adjustments
Press the MENU button to return to the VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
The adjustments are saved for each video mode (VIDEO mode, S-VIDEO
mode, and COMPONENT VIDEO mode).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA)
VERTICAL POSITION
VERTICAL POSITION
0
When too low····Adjust with the button.
MENU
NEXT
RETURN SET
ADJUST
When too high····Adjust with the button.
HEIGHT
HEIGHT
MENU
0
NEXT
RETURN SET
When too small····Adjust with the button.
When too large····Adjust with the button.
ADJUST
HORIZONTAL POSITION
HORIZONTAL POSITION
0
When too far left:····Adjust with the button.
When too far right:····Adjust with the button.
MENU
NEXT
RETURN SET
ADJUST
HORIZONTAL WIDTH
HORIZONTAL WIDTH
0
MENU
NEXT
RETURN SET
ADJUST
When too small····Adjust with the button.
When too large····Adjust with the button.
Adjustment items
• Pressing the SET button moves selection to the next item.
VERTICAL POSITION
• For VIDEO and S-VIDEO modes: ZOOM: –15 through +15 Other: –7 through +7
COMPONENT VIDEO mode: –90 through +90
HEIGHT
• For VIDEO and S-VIDEO modes: –7 through +7 COMPONENT VIDEO mode: –70 through +70
HORIZONTAL POSITION
• For VIDEO and S-VIDEO modes: –31 through +31 COMPONENT VIDEO mode: –90 through +90
HORIZONTAL WIDTH
• For all modes: –7 through +7
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.
• The adjustments are saved for each video mode.
If there is no operation for 60 seconds, the screen display goes off.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT SOURCE ADJUSTMENTS (VIDEO MODE)
EXAMPLE: SETTING COMPONENT VIDEO
Setting must be done when connecting a color difference signal to the
COMPONENT VIDEO terminal.
Select SOURCE from the
1
VIDEO MENU screen.
VIDEO MENU
1) In COMPONENT VIDEO
mode, press the MENU but-
ton.
COMMON SETTINGS
PICTURE
POSITION/SIZE
SOURCE
2) With the ADJUST button, se-
lect SOURCE.
OTHERS
MENU
ENTER
QUIT
SET
SELECT
3) Set by pressing the SET
button.
Example: When SOURCE is selected
This setting can be done in
COMPONENT VIDEO mode
only.
Select the adjustment
item.
2
With the SET button, select COM-
PONENT VIDEO.
Pressing the SET button moves
the selection to the next item as
below.
COMPONENT VIDEO
MODE 1/MODE 2
MENU
NEXT
RETURN SET
SELECT
COMPONENT VIDEO
CLAMP PULSE
This operation can also be done
using the buttons on the Display’s
operation panel.
Example: When COMPONENT VIDEO is
selected
COMPONENT VIDEO and
CLAMP PULSE are set for
COMPONENT VIDEO mode.
VIDEO SYSTEM can be set for
VIDEO mode and S-VIDEO
mode.
Set the connected equip-
ment.
3
Select with the ADJUST button.
MODE 1: Use this mode for nor-
mal usage such as DVD,
BETACAM or other standard
component video signals.
COMPONENT VIDEO
MODE 1/MODE 2
MENU
NEXT
RETURN SET
SELECT
MODE 2: Use this mode only for
MUSE signal (Hi-Vision – Japa-
nese high definition video signal).
Example: When MODE 1 is selected
To complete adjustments
Press the MENU button to return to the VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
COMPONENT VIDEO and CLAMP PULSE can be set in COMPONENT
VIDEO mode only. VIDEO SYSTEM can be set in VIDEO mode and S-VIDEO
mode only.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING VIDEO SYSTEM AND CLAMP PULSE
VIDEO SYSTEM
VIDEO SYSTEM can be set when the signal is connected to the VIDEO or
S-VIDEO input terminal.
Set by adjusting to the connected signal.
VIDEO SYSTEM
AUTO
In VIDEO or S-VIDEO mode, press the MENU button to select SOURCE.
Select with the ADJUST button.
MENU
RETURN
SELECT
Pressing the ADJUST button moves the selection to the next item as be-
low.
AUTO
NTSC
PAL
SECAM
N-PAL
4.43NTSC
M-PAL
When N-PAL and M-PAL signals are input, signals cannot be received
successfully in AUTO mode. Select either N-PAL or M-PAL.
This setting can be done in VIDEO mode and S-VIDEO mode only. The
VIDEO SYSTEM setting is saved for VIDEO mode and S-VIDEO mode.
CLAMP PULSE
When connecting a color difference signal to the COMPONENT VIDEO
input terminal, CLAMP PULSE must be set.
This setting switches the phase of the clamp pulse.
The ADJUST button can be adjusted in the range from 0 through 4.
Select so that optimum picture is attained.
CLAMP PULSE
0
MENU
NEXT
RETURN SET
ADJUST
This setting can be done in COMPONENT VIDEO mode only.
Adjustment items
• Pressing the SET button moves selection to the next item.
• Set CLAMP PULSE as follows, depending on the connected device signal.
1 : MUSE signal (Hi-Vision – Japanese high definition video signal)
4: NTSC, PAL, SECAM
When connecting the other devices than the ones described above, adjust the clamp pulse so that the optimum image is
obtained.
If there is no operation for 60 seconds, the screen display goes off.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (VIDEO MODE)
EXAMPLE: MAKING THE GAMMA SETTING
Select OTHERS from the
1
2
VIDEO MENU screen.
VIDEO MENU
1) Press the MENU button.
COMMON SETTINGS
2) With the ADJUST button, se-
lect OTHERS.
PICTURE
POSITION/SIZE
SOURCE
OTHERS
3) Press the SET button to fix the
OTHERS setting.
MENU
ENTER
QUIT
SET
SELECT
Example: When OTHERS is selected
Select the adjustment
item.
With the SET button, select
GAMMA.
Pressing the SET button moves
the selection to the next item as
below.
GAMMA
MOTION/STILL
MENU
NEXT
RETURN SET
SELECT
GAMMA
GRADATION
Example: When GAMMA is selected
This operation can also be done
using the buttons on the Display’s
operation panel.
Select the desired picture.
3
Select with the ADJUST button.
MOTION
Carries out automatic correction
so that the video is optimum for
viewing moving images.
GAMMA
MOTION/STILL
MENU
NEXT
RETURN SET
SELECT
STILL
Carries out automatic correction
so that the video is optimum for
viewing still images.
Example: When MOTION is selected
To complete adjustments
Press the MENU button to return to VIDEO MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
The adjustments are saved for each video mode (VIDEO mode, S-VIDEO
mode, and COMPONENT VIDEO mode).
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENT ITEMS
GRADATION
Gradation display can be selected to suit still or moving images.
MODE1···· Carries out automatic correction so that the video is optimum
for viewing moving images.
GRADATION
MODE 1/MODE 2
MODE2···· Carries out automatic correction so that the video is optimum
MENU
NEXT
RETURN SET
SELECT
for viewing still images.
Adjustment items
• Pressing the SET button moves selection to the next item.
• VIDEO mode is the generic term for VIDEO mode, S-VIDEO mode, and COMPONENT VIDEO mode.
• The adjustments are saved for each video mode.
If there is no operation for 60 seconds, the screen display goes off.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO ADJUSTMENTS (RGB MODE)
EXAMPLE: ADJUSTING THE CONTRAST
Select PICTURE from the
1
2
RGB MENU screen.
RGB MENU
1) Press the MENU button.
COMMON SETTINGS
2) With the ADJUST button, se-
lect PICTURE.
PICTURE
POSITION/SIZE
SOURCE
OTHERS
3) Set by pressing the SET
button.
MENU
ENTER
QUIT
SET
SELECT
Example: When PICTURE is selected
Select the adjustment
item.
With the SET button, select CON-
TRAST.
Pressing the SET button moves
the selection to the next item as
below.
CONTRAST
MENU
NEXT
RETURN SET
ADJUST
BRIGHTNESS
CONTRAST
Example: When CONTRAST is selected
This operation can also be done
using the buttons on the Display’s
operation panel.
Adjust to the desired pic-
ture.
3
button····Makes the contrast
stronger.
button····Makes the contrast
CONTRAST
weaker.
MENU
NEXT
RETURN SET
ADJUST
To adjust another item, repeat
steps 2 and 3.
Example: When the
button is pressed
To complete adjustments
Press the MENU button to return to the RGB MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
Adjustment settings for the RGB 1 and RGB 2 modes are stored separately
for each mode.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO ADJUSTMENT ITEMS
BRIGHTNESS
Screen brightness can be adjusted.
button: Makes the picture brighter.
button: Makes the picture darker.
BRIGHTNESS
MENU
NEXT
RETURN SET
ADJUST
CONTRAST
Screen contrast (difference between dark and light) can be adjusted.
button: Makes the contrast stronger.
CONTRAST
button: Makes the contrast weaker.
MENU
NEXT
RETURN SET
ADJUST
Adjustment items
• Pressing the SET button moves the selection to the next item.
• The RGB mode means both RGB 1 and RGB 2 modes.
If there is no operation for 60 seconds, the screen display goes off.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN ADJUSTMENT (RGB MODE)
EXAMPLE: ADJUSTING THE HEIGHT OF
THE SCREEN
Select POSITION/SIZE
1
from the RGB MENU
screen.
RGB MENU
COMMON SETTINGS
1) Press the MENU button.
PICTURE
POSITION/SIZE
SOURCE
2) With the ADJUST button,
select POSITION/SIZE.
OTHERS
MENU
ENTER
QUIT
SET
SELECT
3) Set by pressing the SET
button.
Example: When POSITION/SIZE is
selected
Select the adjustment
item.
2
With the SET button, select
HEIGHT.
Pressing the SET button moves
the selection to the next item as
below.
HEIGHT
0
MENU
NEXT
RETURN SET
ADJUST
This operation can also be done
using the buttons on the Display’s
operation panel.
VERTICAL
POSITION
HEIGHT
Example: When HEIGHT is selected
VERTICAL
LINE
HORIZONTAL
WIDTH
HORIZONTAL
POSITION
Adjust with the ADJUST
button.
3
button····Enlarges the screen.
button····Reduces the screen.
HEIGHT
–20
The adjustment range is from
MENU
NEXT
RETURN SET
ADJUST
–150 through +150.
To adjust multiple items, repeat
Example: When the
button is pressed
steps 2 and 3.
To complete adjustments
Press the MENU button to return to the RGB MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
Adjustment settings for the RGB 1 and RGB 2 modes are stored separately
for each mode.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT ITEM LIST (ADJUSTMENT CRITERIA)
VERTICAL POSITION
VERTICAL POSITION
0
When too low····Adjust with the button.
When too high····Adjust with the button.
The adjustment range is from –250 through +250.
MENU
NEXT
RETURN SET
ADJUST
HEIGHT
HEIGHT
MENU
0
When too small····Adjust with the button.
When too large····Adjust with the button.
The adjustment range is from –150 through +150.
NEXT
RETURN SET
ADJUST
HORIZONTAL POSITION
HORIZONTAL POSITION
0
When too far left····Adjust with the button.
When too far right····Adjust with the button.
The adjustment range is from –250 through +250.
MENU
NEXT
RETURN SET
ADJUST
HORIZONTAL WIDTH
HORIZONTAL WIDTH
0
When too small····Adjust with the button.
When too large····Adjust with the button.
The adjustment range is from –150 through +150.
MENU
NEXT
RETURN SET
ADJUST
VERTICAL LINE
The number of vertical lines on the screen can be set.
With the ADJUST button, select the number of vertical lines.
Pressing the ADJUST button moves the selection to the next item as be-
low.
VERTICAL LINE
480 LINES
480LINES
400LINES
MENU
NEXT
RETURN SET
SELECT
350LINES
Adjustment items
• Pressing the SET button moves selection to the next item.
• After adjustment, the screen may be jumbled. If so, return the setting to the original adjustment value.
• The RGB mode means both RGB 1 and RGB 2 modes.
If there is no operation for 60 seconds, the screen display goes off.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
INPUT SOURCE ADJUSTMENTS (RGB MODE)
The Macintosh mode and the clamp pulse mode can be set for the input source, and the input signal can be
confirmed.
EXAMPLE: SETTING MACINTOSH MODE
The Apple Macintosh has two dot clocks. If the display is partly cut or the video
and the dot clock do not match, set the dot clock as follows:
Select SOURCE from the
1
2
RGB MENU screen.
RGB MENU
1) Press the MENU button.
COMMON SETTINGS
PICTURE
2) With the ADJUST button, se-
lect SOURCE.
POSITION/SIZE
SOURCE
OTHERS
3) Set by pressing the SET
button.
MENU
ENTER
QUIT
SET
SELECT
Example: When SOURCE is selected
Select the adjustment
item.
With the SET button, select MAC
MODE.
Pressing the SET button moves
the selection to the next item as
below.
MAC MODE
MODE 1/MODE 2
MENU
NEXT
RETURN SET
SELECT
MAC MODE
CLAMP PULSE
Example: When MAC MODE is
selected
SIGNAL INFORMATION
This operation can also be done
using the buttons on the Display’s
operation panel.
The MAC MODE can be set
only in the RGB 1 mode.
Select the appropriate
mode for the dot clock.
3
Select with the ADJUST button.
Pressing the ADJUST button
moves the selection to the next
item as below.
MAC MODE
MODE 1/MODE 2
MENU
NEXT
RETURN SET
SELECT
MODE 1
MODE 2
fH
fV
Example: When MODE1 is selected
MODE 1····35 kHz
66.67 Hz
MODE 2····34.975 kHz 66.61 Hz
To adjust multiple items, repeat
steps 2 and 3.
To complete adjustments
Press the MENU button to return to the RGB MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
Adjustment settings for the RGB 1 and RGB 2 modes are stored separately
for each mode.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS AND CHECK ITEMS
CLAMP PULSE
CLAMP PULSE must be set when the signal is connected to the RGB
input terminal.
This setting switches the phase of the clamp pulse.
The ADJUST button can be adjusted in the range from 0 through 4.
Select so that optimum picture is attained.
CLAMP PULSE
0
MENU
NEXT
RETURN SET
ADJUST
SIGNAL INFORMATION
The sync signal information input from the RGB input terminal can be
checked.
SIGNAL INFORMATION
MODE: 6
TYPE: SEPARATE
MODE: Fixed mode No. (Mode Nos. are set out on page 40.)
TYPE: COMPOSITE, SEPARATE or SYNC ON GREEN.
MENU
NEXT
RETURN SET
For details, see “Personal Computers that Can Be Connected” on page
40.
When no signal is detected, NO SIGNAL is displayed.
Adjustment items
• Pressing the SET button moves selection to the next item.
• Set CLAMP PULSE as follows, depending on the connected device signal.
0 : Normal
1 : MUSE signal (Hi-Vision – Japanese high definition video signal)
2 : Other
3 : MAC
4 : NTSC, PAL, SECAM
Points about usage
Depending on the type of device inputting the signal, SYNC ON GREEN and other sync signals may be input simultaneously.
This can cause the background of the screen to be too bright or too green. If this occurs, set the clamp pulse to 3.
• The RGB mode means both RGB 1 and RGB 2 modes.
If there is no operation for 60 seconds, the screen display goes off.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENTS (RGB MODE)
EXAMPLE: SETTING THE GRADATION
Select OTHERS from the
1
RGB MENU screen.
RGB MENU
1) Press the MENU button.
COMMON SETTINGS
2) With the ADJUST button,
select OTHERS.
PICTURE
POSITION/SIZE
SOURCE
OTHERS
3) Set by pressing the SET
button.
MENU
ENTER
QUIT
SELECT
SET
Example: When OTHERS is selected
Select the adjustment
item.
2
With the SET button, select GRA-
DATION.
Pressing the SET button moves
the selection to the next item as
below.
GRADATION
MODE 1/MODE 2
MENU
NEXT
RETURN SET
SELECT
GAMMA
GRADATION
DOT CLOCK
Example: When GRADATION is selected
SYNC PHASE
CLOCK PHASE 2
CLOCK PHASE 1
The CLOCK PHASE 2 can be
adjusted only in the RGB 2
mode.
This operation can also be done
using the buttons on the Display’s
operation panel.
Adjust to the desired
picture.
3
Select with the ADJUST button.
MODE1: Carries out automatic
correction so that the
GRADATION
video is optimum for
MODE 1/MODE 2
MENU
NEXT
RETURN SET
SELECT
viewing moving images.
MODE2: Carries out automatic
correction so that the
Example: When the MODE 2 is selected
video is optimum for
viewing still images.
To adjust multiple items, repeat
steps 2 and 3.
To complete adjustments
Press the MENU button to return to the RGB MENU.
Pressing the MENU button returns the display to the previous screen and closes
the adjustment screen.
Adjustment settings for the RGB 1 and RGB 2 modes are stored separately
for each mode.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER ADJUSTMENT ITEMS (ADJUSTMENT CRITERIA)
GAMMA
Dynamic GAMMA correction can be set.
GAMMA
MENU
MOTION: Set for viewing moving images.
STILL: Set for viewing still images.
MOTION/STILL
NEXT
RETURN SET
SELECT
GRADATION
Gradation can be set.
MODE 1: Set for viewing moving images.
MODE 2: Set for viewing still images.
GRADATION
MODE 1/MODE 2
MENU
NEXT
RETURN SET
SELECT
DOT CLOCK
Depending on the clock frequency of the personal computer, the screen
may become blurred. If so, adjust.
DOT CLOCK
0
The ADJUST button can be adjusted in the range from –300 through +300.
MENU
NEXT
NEXT
NEXT
RETURN SET
ADJUST
CLOCK PHASE 1
Depending on the clock phase of the personal computer, the screen may
become blurred. If so, adjust.
CLOCK PHASE 1
The ADJUST button can be adjusted in the range from 0 through 15.
0
MENU
RETURN SET
ADJUST
CLOCK PHASE 2
Depending on the clock phase of the personal computer, the screen may
become blurred. If so, adjust.
The ADJUST button can be adjusted in the range from 0 through 15.
This adjustment can be done only in the RGB 2 mode.
CLOCK PHASE 2
0
MENU
RETURN SET
ADJUST
To adjust the CLOCK PHASE in the RGB 2 mode, be sure to adjust the
CLOCK PHASE 2 first.
SYNC PHASE
SYNC PHASE
0
The screen may tremble vertically. If so, use the ADJUST button to adjust
MENU
NEXT
RETURN SET
ADJUST
the screen within the range of –2 and +1.
Adjustment items
• Pressing the SET button moves selection to the next item.
• When GRADATION is automatically recognized in SVGA mode and RGB 1 mode, it cannot be set.
• Adjust DOT CLOCK and CLOCK PHASE after invoking normal mode with the WIDE button.
• When SVGA, XGA mode has been automatically recognized, the screen may be jumbled depending on what equipment is
connected. If so, adjust DOT CLOCK.
• The RGB mode means both RGB 1 and RGB 2 modes.
If there is no operation for 60 seconds, the screen display goes off.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
PERSONAL COMPUTERS THAT CAN BE CONNECTED
The Plasmavision is set at the factory with adjustment values for 11 types for the RGB 1 mode and 8 types for the RGB
2 mode of signals. (See the table below.) When any of these signals is input, it is automatically discriminated. For these
signals, the desired screen can be adjusted according to the instructions on adjusting the screen.
The Plasmavision can also store settings for those set at the factory, as shown in the table below. Input the signals
whose settings are to be stored into memory and adjust for the desired screen following the instructions on adjusting the
screen. Release the adjustment button to automatically store the level into memory. After adjustment, when the same
signals are input, they are displayed with the setting levels last stored into memory.
Factory-set signals
RGB
MODE
Mode
number
Display
(dots × lines)
Horizontal
frequency (kHz)
Vertical frequency
(Hz)
Supported signal
Note1 When dedicated
graphics board used
1
852 × 480
31.72
59.97
2
3
4
5
640 × 480
640 × 480
640 × 480
720 × 400
640 × 480
640 × 480
640 × 400
640 × 400
800 × 600
640 × 480
640 × 480
31.47
37.86
37.50
31.47
34.97
35.00
24.83
31.50
35.16
15.73
15.63
59.94
72.81
75.00
70.09
66.61
66.67
56.42
70.15
56.25
59.94
50.00
VGA
VGA 72 Hz
VGA 75 Hz
VGA 400 lines
MAC 13RGB (1)
MAC 13RGB (2)
PC98 24kHz
PC98 31kHz
SVGA 56 Hz Note2
60 fields
RGB 1
6
7
8
9
10
11
50 fields
12 to 16
1
15.63 to 60.00
31.72
50.00 to 75.00
59.97
User settings
Note1 When dedicated
graphics board used
852 × 480
2
3
4
5
6
7
8
640 × 480
640 × 480
800 × 600
800 × 600
800 × 600
1024 × 768
1024 × 768
31.47
37.86
35.16
37.88
48.08
48.36
56.48
59.94
72.81
56.25
60.32
72.19
60.00
70.08
VGA
VGA 72 Hz
S-VGA 56 Hz Note2
S-VGA 60 Hz Note2
S-VGA 72 Hz Note2
RGB 2
XGA 60 Hz
XGA 70 Hz
Note2
Note2
9 to 16
31.00 to 100.0
50.00 to 120.0
User setting Note3
Note 1: The dedicated graphics board is an optional product.
2: The 800 x 600 mode and the 1024 x 768 mode are compressed display through compression interpolation. Also, the
screen display is also compressed for display.
3: Images on the screen may be blurred or not be displayed due to the settings of personal computer. Adjust or change the
resolution (frequency) of the personal computer.
Points about usage
The company names and product names in this document are trademarks or registered trademarks of their respective com-
panies.
The mode numbers indicate the SIGNAL INFORMATION modes set for the RGB 1 mode, RGB 2 mode and input source.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL PRODUCTS
• Wall-mounting unit (horizontal)
For 0°
For 5°
For 10°
For 15°
installation angle
installation angle
installation angle
installation angle
P-42WB01-B
P-42WB02-B
P-42WB03-B
P-42WB04-B
P-42WB05-B
For 0 – 10° installation angle
• Wall-mounting unit (vertical)
• Ceiling-mounting unit
For 0° installation angle
P-42WB50-B
P-42CT01-B
Installation angle variable
0 – 15°
The pipe is not supplied with the ceiling-hanging unit,
so consult your product dealer.
• Desktop stand
• Graphics board
P-42TT01-H
When a graphics board is used
with a DOS/V personal computer,
an 852 dot x 480 line wide screen
can be displayed.
P-42GA04
When installing an optional product, follow the directions in the optional product user's or installation manual.
The colors of the Plasmavision and optional products are slightly different.
WARNING
• Request your product dealer to mount and install these products.
If you do the mounting or moving work yourself, the equipment may fall or topple over, resulting in injuries,
fire, or electrocution.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model name
PDS4207W-H/PDS4207E-H
Screen size
42 inches---92.0 cm (W) x 51.8 cm (H) x 105.6 cm (width across corners)
Aspect ratio
16:9
Weight
38.5 kg
External dimensions
Power supply
103.5 (W) × 64.0 (H) × 15.0 (D) cm
100–240VAC, 50/60 Hz
3.7 A
Power consumption
Screen dimensions
Display pixel count
92.0 (W) x 51.8 (H) cm
852 (horizontal) x 480 (vertical)
Display modes
• For video, S-video input: NORMAL, AUTO, WIDE 1, WIDE 2,
ZOOM 1, ZOOM 2
• For component video input: NORMAL, WIDE 1, WIDE 2, ZOOM 1, ZOOM 2
• For RGB 1, RGB 2 input: NORMAL, WIDE
Display color count
Audio output
16.77 million (256 each for red, green and blue)
2 W + 2 W (EIAJ)
Speakers
Two internal
External connection terminals
Video
• Video input
One BNC terminal
One S terminal
1Vp-p/75 Ω
• S video input
Y: 1Vp-p/75 Ω
C: 0.286Vp-p/75 Ω
• Component video input Three BNC terminals Y: 1Vp-p/75 Ω
Pb/B-Y: 0.7Vp-p/75 Ω
Pr/R-Y: 0.7Vp-p/75 Ω
Compatible format
PC
• NTSC, PAL, SECAM, N-PAL, M-PAL, 4.43NTSC
• RGB 1 input
• RGB 2 input
One 15-pin 3-row mD-sub terminal
Video signal: 0.7Vp-p/75 Ω
SYNC signal: TTL level or 0.3Vp-p/75 Ω
Five BNC terminals R:0.7Vp-p/75 Ω
G:0.7Vp-p/75 Ω
B:0.7Vp-p/75 Ω
H:TTL level or 0.3Vp-p/75 Ω
V: TTL level or 0.3Vp-p/75 Ω
Audio
• Audio input
• RS-232C
One system with two pin plug terminals
(L/R) 500 mVrms/22 kΩ min.
Control
One D-sub 9-pin terminal
Operating conditions
Temperature: 0 to 40°C Humidity: 20 to 90 %
Accessories
Two cable clampers, power cord (PDS4207W-H × 3, PDS4207E-H × 1),
one remote controller (P-42RM01-B), two AA batteries, one user’s manual,
two brackets (two types), two screws (two types)
• Specifications and external appearance may be changed for the sake of improvement.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
RGB 1 input terminal (Display is RGB 1 INPUT.)
Connects to a personal computer RGB output terminal.
Pin No.
Input signal
Red
Pin No.
Input signal
1
9
5
4
3
2
1
2
3
4
5
6
7
8
Green
10
Ground
10
9
8
7
6
Blue
11
15 14 13 12 11
12
13
Ground
Ground
Ground
Ground
Hor. sync
Vert. sync
The sync switch (TTL/ANALOG
switch) is on the rear of the 13-pin hori-
zontal sync and 14-pin vertical sync
terminals.
14
15
Outer side
Ground
RS-232C input terminal (Display is RS-232C.)
Connects to a personal computer RS-232C terminal.
Pin No.
No. Signal
1
DCD (Data Carrier Detect)
RD (Receive Data)
2
Pin No.
3
TD (Transmit Data)
4
5
DTR (Data Terminal Ready)
GND (Ground)
1
5
6
9
6
7
8
9
DSR (Data Set Ready)
RTS (Request To Send)
CTS (Clear To Send)
RI (Ring Indication)
Regulation····PDS4207W-H/PDS4207E-H
• UL, CSA ······Safety: UL1950/CSA C22.2 No.950/FCC Class
EMC: FCC Part 15 Class A
• CE ···············Safety: EN60950 1992/A1: 1993/A2: 1993/A3: 1995
EMC: EN55022
EN61000-3-2
1994, Class A
1995
EN61000-3-3
EN50082-2
1995
1995
EN61000-4-2
1995
EN61000-4-4
1995
EN61000-4-8
1993
ENV50140
1993
ENV50141
1993
ENV50204
1995
• AS ···············Safety: IEC950 A1/A2/A3/A4
EMC: AS/NZS 3548
Points about shipping
The Plasmavision is a precision instrument, and requires dedicated packing materials for shipping.
Use Fujitsu's packing materials only.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
BEFORE CLEANING
For stubborn grime, soak the soft cloth in neutral cleaning
Always unplug the power cord from the
socket.
agent diluted with water, wring it out well, and wipe clean.
Then, finish with a dry, soft cloth.
Cleaning the cabinet and remote controller
Cleaning the screen
Do not use benzene, paint thinner, or other solvents. They
can cause deterioration or paint peeling on the cabinet,
the screen front filter, or the remote controller.
Wipe gently with a soft cloth.
The surface of the screen is easily scratched, so do not
strike it or rub it with anything hard.
Wipe gently with a soft cloth.
BEFORE REQUESTING REPAIR
If you think a malfunction may have occurred, check the following items.
When this happens
• The power does not come on.
• The picture does not appear.
Check
• Is the power cord disconnected?
• Is a cable to other equipment disconnected?
• The remote controller does not work.
• Are the batteries installed with their poles reversed?
• Are the batteries flat?
• Are you operating from far away?
• Are you trying to operate with the transmitting section of the
remote controller not facing the reception section of the
display?
• Is there any obstruction between the display and the remote
controller?
• There is a creaking sound.
• There is a humming sound.
• This sound is generated by the expansion and contraction of
the cabinet owing to change in the room temperature.
• The Plasmavision has heat radiation fins to prevent its internal
temperature from rising too high during operation. The sound
you hear is the fan rotating.
• There are dots on the screen.
• Is the connected tuner being affected by interference from a
car, train, high-voltage line, neon light, or the like?
• The colors and tints are not good.
• There is no sound.
• Do any of the video settings need readjusting?
• Are the internal speakers switched off?
•
•
ERROR MESSAGE CONDITION 1 is displayed. • The fan is malfunctioning. Switch off the power.
ERROR MESSAGE CONDITION 2 is displayed. • The temperature inside the set has risen far too high.
Switch off the power. (The power can be turned on once the
temperature lowers.)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
|