FujiFilm Digital Camera 16010710 User Manual

YF00628-122

DIGITAL CAMERA

Before You Begin

First Steps

FINEPIX Z70 series

Owner’s Manual

Basic Photography and Playback

More on Playbaacckk

Single-Frame Playback ...............................................................40

Playback Zoom..............................................................................41

Multi-Frame Playback .................................................................42

M Deleting Pictures....................................................................43

Movies

A Recording Movies...................................................................45

R Successive Movie................................................................46

D Viewing Movies .......................................................................48

Basic Photograaphy and Playback

Taking Pictures in G(SCENE RECOGNITION) Mode.....16

Viewing Pictures............................................................................21

viii

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

The Playback Menu.......................................................................67

Using the Playback Menu .........................................................67

Playback Menu Options.............................................................67

V IMAGE SEARCH....................................................................68

vEDIT FOR BLOG.....................................................................69

e MOVIE EDIT............................................................................72

b MARK FOR UPLOAD TO.....................................................72

q SLIDE SHOW.........................................................................74

a RED EYE REMOVAL.............................................................74

O PROTECT................................................................................75

R CROP .......................................................................................76

j RESIZE ....................................................................................77

N IMAGE ROTATE ....................................................................78

P COPY .......................................................................................79

Q VOICE MEMO........................................................................80

PTRANSITION.........................................................................82

c MOVIE TRIMMING ...............................................................82

The Setup Menu.............................................................................83

Using the Setup Menu ...............................................................83

Setup Menu Options...................................................................84

p TIME DIFFERENCE...............................................................86

m FORMAT .................................................................................87

a IMAGE DISP...........................................................................87

b FRAME NO.............................................................................88

k ILLUMINATION.....................................................................88

j SOUND ...................................................................................89

f PLAYBACK VOLUME...........................................................89

g LCD BRIGHTNESS................................................................89

h LCD MODE ............................................................................89

o AUTO POWER OFF..............................................................89

c DIGITAL ZOOM....................................................................90

Connections

Viewing Pictures on TV...............................................................49

Printing Pictures via USB ...........................................................50

Connecting the Camera ............................................................50

Printing Selected Pictures ........................................................50

Printing the DPOF Print Order ................................................51

Creating a DPOF Print Order....................................................53

Viewing Pictures on a Computer............................................55

Installing the Software...............................................................55

Windows: Installing My FinePix Studio.............................55

Macintosh: Installing FinePixViewer..................................57

Connecting the Camera ............................................................59

Menus

The Shooting Menu......................................................................61

Using the Shooting Menu.........................................................61

Shooting Menu Options............................................................62

n ISO............................................................................................63

o IMAGE SIZE ...........................................................................63

T IMAGE QUALITY ..................................................................64

p FINEPIX COLOR....................................................................64

C WHITE BALANCE.................................................................65

E CONTINUOUS (Continuous shooting)........................65

F AF MODE ...............................................................................66

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Technical Notes

Optional Accessories ...................................................................91

Accessories from Fujiﬁlm ..........................................................92

Troublesshooting

Troubleshooting ............................................................................93

Warning Messages and Displays......................................... 100

Appendix

Glossary .......................................................................................... 104

Internal Memory/Memory Card Capacity....................... 105

Speciﬁcations............................................................................... 106

Caring for the Camera...............................................................110

Storage and Use.......................................................................110

Cleaning......................................................................................110

Travelling....................................................................................110

Notes and Cautions ....................................................................111

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Symbols and Conventions

The following symbols are used in this manual:

Caution: This information should be read before use to ensure correct operation.

Note: Points to note when using the camera.

Tip: Additional information that may be helpful when using the camera.

Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the

monitor display may be simpliﬁed for explanatory purposes.

Supplied Accessories

The following items are included with the camera:

CD-ROM

NP-45A rechargeable

battery

BC-45B battery

charger

USB cable

Attaching the Strap

Documentation

Attach the strap as shown.

Strap

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Parts of the Camera

For more information, refer to the page listed to the right of each item.

Selector button

Move cursor up

(exposure compensation) button (pg. 32)

I (delete) button (pg. 21)

Move cursor left

L (macro)

button (pg. 34)

23 21

Move cursor down

J (self-timer)

button (pg. 37)

Move cursor right

K (ﬂash)

button (pg. 35)

1 A (movie recording) button...........45 10 Upload button...........................................83 18 Battery-chamber cover.......................... 6

Shutter button...........................................19 11 W (zoom out) button.....................17, 42 19 DISP (display)/BACK button..........20, 40

Flash..................................................................35 12 T (zoom in) button...........................17, 41 U (silent mode) button......................36

Microphone.................................................80 13 D (playback) button............................40 20 Tripod mount

Lens

14 Connector for multi-connector

21 Battery chamber......................................... 6

22 Memory card slot....................................... 9

23 Battery latch .................................................. 6

adapter............................................................49

Speaker...........................................................81

Self-timer lamp..........................................39

Lens cover.....................................................13

Monitor............................................................. 3

15 Strap eyelet.................................................... 1

16 MENU/OK button.........................................14

17 Lock lever........................................................ 6

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

The Monitor

The following indicators may appear in the monitor during shooting and playback:

■ Shooting

10 11 12 13

Shooting mode.............................. 22 12 Internal memory indicator^*.......8

Flash mode.........................................35 13 Movie quality....................................45

Macro (close-up) mode............. 34 14 Number of available frames

100

................................................................105

15 Sensitivity............................................63

16 Image quality................................... 64

17 Image size...........................................63

18 FINEPIX COLOR ............................... 64

Self timer indicator........................37

Focus warning .................................19

Blur warning......................................35

Date and time...................................14

Intelligent Face Detection

12 / 31 / 2050 10:00 AM

1²

indicator ..............................................27 19 White balance..................................65

Continuous mode .........................65 20 Battery level.......................................16

10 Silent mode ...................................... 36 21 Exposure compensation...........32

11 Focus frame.......................................19

* Indicates that no memory card is inserted and that pictures will be

stored in the camera’s internal memory (pg. 8).

■ Playback

Playback mode indicator......... 40

Red-eye removal indicator ......74

Protected image.............................75 10 Blog image........................................ 69

DPOF print indicator....................51 11 Blog movie........................................ 72

Voice memo indicator................ 80 12 Portrait enhancer...........................24

Upload setting................................ 72 13 Frame number................................ 88

Aperture

Shutter speed

100-0001

100

YouTube

14 Gift image.......................................... 40

15 Silent mode indicator................. 36

12 / 31 / 2050 10:00 AM

1²

Intelligent Face Detection

indicator...............................................41

1/250

F4.0

Download from Www.Somanuals.com. All Manuals Search And Download.

Charging the Battery

The battery is not charged at shipment. Charge the battery before use.

• Remove dirt from the battery terminals with

Batteries

a clean, dry cloth. Failure to observe this

precaution could prevent the battery from

charging.

The camera uses an NP-45A rechargeable battery.

Place the battery in the charger.

Insert the battery into the supplied battery

charger as shown, making sure that the

• Charging times increase at low temperatures.

The Charging Indicator

The charging indicator shows battery charge status

as follows:

battery is in the orientation indicated by the

E Flabels.

Chaarrginng inndiicator Batttteerryy sstattuuss

Action

Insert

Charging indicator

Battery not

Arrow

Oﬀ

Battery

inserted.

the battery.

On (yellow) Battery charging.

—

Remove

the battery.

Unplug the

charger and

remove the

battery.

E F

Battery fully

charged.

label

On (green)

E Flabel

Battery charger

Blinks (yellow)

Battery fault.

Plug the charger in.

Plug the charger into a power outlet. The

charging indicator will light.

Charge the battery.

Remove the battery when charging is

complete.

CCautions

• Unplug the charger when it is not in use.

Charging time

See speciﬁcations of the battery charger (pg. 108).

Download from Www.Somanuals.com. All Manuals Search And Download.

Charging the Battery

Cautions: Caring for the Battery

• Do not aﬃx stickers or other objects to the battery. Failure to observe this precaution could make it

impossible to remove the battery from the camera.

• Do not short the battery terminals. The battery could overheat.

• Only use batteries designed for use with this product. Failure to observe this precaution could result in

product malfunction.

• Do not remove the labels from the battery or attempt to split or peel the outer casing.

• The battery gradually loses its charge when not in use. Charge the battery one or two days before use.

• Read the supplied documentation for additional cautions concerning battery use.

Caution: Battery Life

A noticeable decrease in the length of time the battery will hold a charge indicates that it has reached the end

of its service life and should be replaced.

Cautions: Using the Battery Charger

• Unplug the charger when it is not in use.

• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could

prevent the battery from charging.

• Charging times increase at low temperatures.

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting the Battery

After charging the battery, insert it in the camera as described below.

Open the battery-chamber cover.

Open the battery-chamber cover as shown,

sliding the lock lever in the direction of the

arrow.

Insert the battery.

Face the gold terminals

downward and align

the orange stripe on the

battery with the orange

battery latch and slide

the battery into the

Lock lever

camera, keeping the

battery latch pressed to

the side. Conﬁrm that

the battery is securely latched.

Orange stripe

Cautions

• Do not turn the camera on or oﬀ while the

battery-chamber cover is open. Failure to

observe this precaution could result in damage

to image ﬁles or memory cards.

• Do not use excessive force when handling the

battery-chamber cover.

Battery latch

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting the Battery

Caution

Removing the Battery

Insert the battery in the correct orientation. Do

NOT use force or attempt to insert the battery

upside down or backwards. The battery will

slide in easily in the correct orientation.

After turning the camera oﬀ, open the battery-

chamber cover, press the battery latch to the side,

and slide the battery out of the camera as shown.

Close the battery-chamber cover.

Battery latch

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting a Memory Card

Although the camera can store pictures in internal memory, SD memory cards (sold separately) can

be used to store additional pictures.

When no memory card is inserted, d appears in the monitor and internal memory is used for recording

and playback. Note that because camera malfunction could cause internal memory to become

corrupted, the pictures in internal memory should periodically be transferred to a computer and

saved on the computer hard disk or on removable media such as CDs or DVDs. The pictures in

internal memory can also be copied to a memory card (see page 79). To prevent internal memory

from becoming full, be sure to delete pictures when they are no longer needed.

When a memory card is inserted as described below, the card will be used for recording and playback.

■ Compatible Memory Cards

SanDisk SD and SDHC memory cards have been tested and approved for use in the camera. A

complete list of approved memory cards is available at http://www.fujifilm.com/products/digital_

cameras/index.html. Operation is not guaranteed with other cards. The camera can not be used with

MultiMediaCard (MMC) or xD-Picture Cards.

When recording high-deﬁnition movies, use a memory card rated at Class 4 (write speed of 4MB per

second) or higher.

Caution

SD memory cards can be locked, making it impossible to format the card

or to record or delete images. Before inserting an SD memory card, slide

the write-protect switch to the unlocked position.

Write-protect

switch

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting a Memory Card

Insert the memory card.

■ Inserting a Memory Card

Holding the memory card in the orientation

shown below, slide it all the way in. Press

ﬁrmly until it clicks into place.

Open the battery-chamber cover.

Open the battery-chamber cover as shown,

sliding the lock lever in the direction of the

arrow.

Battery

Lock lever

Click

Note

Be sure the camera is oﬀ before opening the

battery-chamber cover.

Cautions

• Do not turn the camera on or oﬀ while the

battery-chamber cover is open. Failure to

observe this precaution could result in damage

to image ﬁles or memory cards.

• Do not use excessive force when handling the

battery-chamber cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting a Memory Card

• Be sure card is at

correct orientation;

do not insert at an

Close the battery-chamber cover.

angle or use force.

If the memory card

is not inserted

correctly, images

will be saved in the

internal memory (d will be displayed) instead

of on the memory card.

• If the battery-chamber cover cannot be closed,

do not attempt to close it with excessive force,

check that the card is correctly orientated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting a Memory Card

Cautions

Removing Memory Cards

• Format SD memory cards before ﬁrst use, and be

sure to reformat all memory cards after using them

in a computer or other device. For more information

on formatting memory cards, see page 87.

• Memory cards are small and can be swallowed;

keep out of reach of children. If a child swallows a

memory card, seek medical assistance immediately.

• Do not use miniSD or microSD adapters

that expose the back of the card. Failure

to observe this precaution may cause

Be sure the camera is oﬀ before opening the battery-

chamber cover. Press the card in and then release it

slowly. The card can now be removed by hand.

Cautions

damage or malfunction. Adapters that

• The memory card may spring out if you remove

your ﬁnger immediately after pushing the card in.

• Memory cards may be warm to the touch after

being removed from the camera. This is normal

and does not indicate a malfunction.

are larger or smaller than the standard

dimensions of an SD card may not eject normally; if

the card does not eject, take the camera to an

authorized service representative. Do not forcibly

remove the card.

• Do not turn the camera oﬀ or remove the memory

card while the memory card is being formatted or

data are being recorded to or deleted from the card.

Failure to observe this precaution could damage the

card.

• Do not aﬃx labels to memory cards. Peeling labels

can cause camera malfunction.

• Movie recording may be interrupted with some

types of SD memory card.

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting a Memory Card

• The data in internal memory may be erased or

corrupted when the camera is repaired. Please note

that the repairer will be able to view pictures in

internal memory.

• Formatting a memory card or internal memory

in the camera creates a folder in which pictures

are stored. Do not rename or delete this folder or

use a computer or other device to edit, delete, or

rename image ﬁles. Always use the camera to delete

pictures from memory cards and internal memory;

before editing or renaming ﬁles, copy them to a

computer and edit or rename the copies, not the

originals.

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning the Camera on and Oﬀ

Shooting Mode

To turn the camera on, open the lens cover fully.

The camera turns oﬀ when the lens cover is

closed.

Playback Mode

To turn the camera on and begin playback, press

the D button for about a second.

Camera On

Camera Oﬀ

Press the D button again to turn the camera oﬀ.

Tip: Switching to Shooting Mode

To exit to shooting mode, press the shutter button

halfway. Press the D button to return to playback.

Tip: Switching to Playback Mode

Press the D button to start playback. Press the

shutter button halfway to return to shooting mode.

Cautions

• Pictures can be aﬀected by ﬁngerprints and other

marks on the lens. Keep the lens clean.

• Closing the cover does not completely cut power to

the camera.

Tip: Auto Power Oﬀ

The camera will turn oﬀ automatically if no operations are performed for the length of time selected in the

AUTO POWER OFF menu (see page 89).

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Setup

A language-selection dialog is displayed the ﬁrst time the camera is turned on. Set up the camera as

described below (for information on resetting the clock or changing languages, see page 83).

Choose a language.

Set the date and time.

START MENU

DATE/TIME NOT SET

2012

2011

YY.MM.DD 2010 1.

12:00

2009

2008

SET

1.1 Press the selector up, down,

left, or right to highlight a

language.

2.1 Press the selector left or right

to highlight the year, month,

day, hour, or minute and

press up or down to change.

To change the order in which the year,

month, and day are displayed, highlight

the date format and press the selector

up or down.

1.2 Press MENU/OK.

2.2Press MENU/OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Setup

Note

You can change the language or date and time

setting later in the setup menu (pg. 83).

Tips: The Camera Clock

• If the battery is removed for an extended period,

the camera clock will be reset and the language-

selection dialog will be displayed when the camera

is turned on.

• If the battery is left in the camera for about 24 hours,

the battery can be removed for about 24 hours

without resetting the clock, language selection, or

power management options.

Download from Www.Somanuals.com. All Manuals Search And Download.

Taking Pictures in G(SCENE RECOGNITION) Mode

This section describes how to take pictures in SCENE RECOGNITION mode.

Turn the camera on.

Fully open the lens cover.

Check the battery level.

Check the battery level in the monitor.

Camera On

Indicator

Descrippttion

SCENE RECOGNITION Mode

(white)

Battery partially discharged.

By simply aiming the camera at the subject, the

camera determines the shooting conditions and

selects the optimal settings.

(white)

(red)

Battery more than half discharged.

Low battery. Charge as soon as

possible.

(blinks red) Battery exhausted. Turn camera oﬀ

and charge battery.

Download from Www.Somanuals.com. All Manuals Search And Download.

Taking Pictures in G(SCENE RECOGNITION) Mode

Frame the picture.

Holding the Camera

Hold the camera steady

with both hands and

brace your elbows against

your sides. Shaking or

unsteady hands can blur

your shots.

Position the main subject in the focus area

and use the zoom buttons to frame the

picture in the monitor.

Press W to zoom out

Press T to zoom in

To prevent pictures that

are out of focus or too

dark (underexposed),

keep your ﬁngers and

other objects away from

the lens and ﬂash.

Zoom indicator

Tip: Focus Lock

Use focus lock (pg. 30) to focus on subjects that are not in the focus frame.

Download from Www.Somanuals.com. All Manuals Search And Download.

Taking Pictures in G(SCENE RECOGNITION) Mode

Simply by pointing the camera at the subject,

the camera automatically analyzes and selects

the most appropriate setting using scene

recognition.

Subject

Icon

Descrippttion

For soft-toned portraits with

natural skin tones.

For crisp, clear daylight shots of

buildings and landscapes.

For night and twilight scenes,

using a high sensitivity setting

to minimize blurring.

For clear close-ups of ﬂowers,

etc.

For a subject backlit against the

sun, preventing the background

from becoming dim.

PORTRAIT H

LANDSCAPE I

The camera analyzes a

subject based on scene

recognition, then an icon

NIGHT

appears in the bottom

PORTRAIT

left of the monitor. (The

illustration shows camera

analysis of a portrait subject.)

MACRO

BACKLIT

PORTRAIT

NIGHT

PORTRAIT

For a subject in a dim place,

reducing blur.

Tip

When a subject can not be analyzed by the camera,

LAUTO mode will be set.

Notes

• B Intelligent Face Detection is turned on

automatically.

• The camera continuously adjusts focus on a face, or

the center area of the monitor.

• Continuous auto focus will be audible and battery

drain will increase.

Download from Www.Somanuals.com. All Manuals Search And Download.

Taking Pictures in G(SCENE RECOGNITION) Mode

Focus.

Shoot.

Press the shutter button halfway to focus on

the subject.

Smoothly press the shutter

button the rest of the way down

to take the picture.

Tip: The Shutter Button

The shutter button has two positions. Pressing the

shutter button halfway sets focus and exposure; to

shoot, press the shutter button the rest of the way

down.

1/250

F4.0

Focus frame

Camera selects small

focus frame and

focuses on subject

Press

halfway

Double

Click

beep

If the camera is able to focus, it will beep twice.

If the camera is unable to focus, the focus frame

will turn red and R will be displayed.

Press

halfway

Press the rest of the

way down

Note

The lens may make a noise when the camera focuses.

This is normal.

Note

If the subject is poorly lit, the ﬂash may ﬁre when the

picture is taken. To take pictures without the ﬂash,

choose another ﬂash mode (pg. 35).

Download from Www.Somanuals.com. All Manuals Search And Download.

Taking Pictures in G(SCENE RECOGNITION) Mode

The Framing Grid

To display best framing (the framing grid) or to view

or hide other indicators in the monitor, press the

DISP/BACK button.

Indicators

displayed

Indicators

hidden

Best framing

To use best framing, position the main subject at

the intersection of two lines or align one of the

horizontal lines with the horizon. Use focus lock (pg.

30) to focus on subjects that will not be in the center

of the frame in the ﬁnal photograph.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures

Pictures can be viewed in the monitor. When taking important photographs, take a test shot and

check the results.

Press the D button.

Deleting Pictures

To delete the picture

currently displayed in

the monitor, press the

selector up (I). The

following dialog will be

displayed.

The most recent picture will be displayed in

the monitor.

ERASE OK?

YES

CANCEL

100 0001

ISO

100

SET

To delete the picture, press the selector

up to highlight YES and press MENU/OK.

To exit without deleting the picture,

highlight CANCEL and press MENU/OK.

12 / 31 / 2050

1/250 F4.0

10 : 00 AM

1 ²

View additional pictures.

Press the selector right to view

pictures in the order recorded,

left to view pictures in reverse

order.

Tip: The Playback Menu

Pictures can also be deleted from the playback

menu (pg. 43).

Press the shutter button to exit to shooting

mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

A Shooting Mode

Choose a shooting mode according to the scene or type of subject.

Press the selector up or down to

highlight the desired mode.

Selecting a Shooting Mode

Press MENU/OK to display the

shooting menu.

SHOOTING MENU

Press MENU/OK to select the

highlighted option.

SHOOTING MODE

ISO

AUTO

IMAGE SIZE

IMAGE QUALITY

FINEPIX COLOR

WHITE BALANCE

AUTO

g Digital IS

COMPLETED

If the subject is poorly lit, blurring caused by camera

shake can be reduced by activating the g DIGITAL

IS (pg. 84). Note that blurring may still occur

Press the selector up or down to

highlight A SHOOTING MODE.

depending on the scene or shooting conditions.

Press the selector right to display

shooting mode options.

SCENE RECOGNITION

Selects optimum

camera settings

for certain modes.

SET

CANCEL

Download from Www.Somanuals.com. All Manuals Search And Download.

A Shooting Mode

A NATURAL & K (Dual Shot Mode)

Shooting Modes

This mode helps ensure good results with backlit

subjects and in other situations with diﬃcult

lighting. Each time the shutter button is pressed,

the camera takes two shots: one shot without

the ﬂash to preserve natural lighting, followed

immediately by a second shot with the ﬂash. Do

not move the camera until shooting is complete.

GSCENE RECOGNITION

Simply by pointing the camera at the subject,

the camera automatically analyzes and selects

the most appropriate setting using scene

recognition.

For more information, see “Taking Pictures in G

(SCENE RECOGNITION) Mode” (pg. 16).

Notes

kAUTO

• Do not use where ﬂash photography is prohibited.

The ﬂash ﬁres even in silent mode (pg. 36).

• Only available if memory remains for two pictures.

• Continuous shooting is not available.

Choose for crisp, clear snapshot. This mode is

recommended in most situations.

P PROGRAM AE

Choose this mode for complete control

of shooting settings, including exposure

compensation (pg. 32), white balance (pg. 65),

and AF mode (pg. 66).

Download from Www.Somanuals.com. All Manuals Search And Download.

A Shooting Mode

B NATURAL LIGHT

L SPORT

Capture natural light indoors, under low light, or

where the ﬂash can not be used. The ﬂash turns

oﬀ and sensitivity is raised to reduce blur.

Choose this mode when photographing moving

subjects. Priority is given to faster shutter

speeds.

C PORTRAIT

Choose this mode for soft-toned portraits with

natural skin tones.

D NIGHT

A high sensitivity setting is selected

automatically to minimize blurring for recording

night and twilight scenes.

V PORTRAIT ENHANCER

Choose for a smooth skin eﬀect in soft-focus

portraits.

UNIGHT (TRIPOD)

Slow shutter speeds are used to record night

scenes. Use of a tripod is recommended to

prevent camera shake.

K LANDSCAPE

Choose this mode for crisp, clear daylight shots

of buildings and landscapes.

E SUNSET

Choose this mode to record the vivid colors in

sunrises and sunsets.

Download from Www.Somanuals.com. All Manuals Search And Download.

A Shooting Mode

F SNOW

O FLOWER

Choose for vivid close-ups of ﬂowers. The

Choose for crisp, clear shots that capture the

brightness of scenes dominated by shining white camera focuses in the macro range and the ﬂash

snow.

turns oﬀ automatically.

G BEACH

Choose for crisp, clear shots that capture the

brightness of sunlit beaches.

P TEXT

Take clear pictures of text or drawings in print.

The camera focuses in the macro range.

I PARTY

Capture indoor background lighting under low-

light conditions.

Download from Www.Somanuals.com. All Manuals Search And Download.

A Shooting Mode

Press MENU/OK to proceed to the

next picture. Repeat steps 5 and 6

until all the frames are ﬁlled.

N AUCTION MODE

Choose this mode to combine up to four

consecutive shots in a single image 640×480

pixels in size (p). This can be used to record

an object from diﬀerent angles when posting

pictures to a web auction. To take pictures in

auction mode:

R SUCCESSIVE MOVIE

Join a series of movie clips into a single movie

(pp. 46–47).

Select N AUCTION MODE.

Press the selector up to display the

following layout options:

Press the selector left or right to

highlight an option.

Press MENU/OK to select the

highlighted option.

Take a picture. The picture will

appear in the ﬁrst frame in layout.

Download from Www.Somanuals.com. All Manuals Search And Download.

B Intelligent Face Detection and Red-Eye Removal

Intelligent Face Detection allows the camera to automatically detect human faces and set focus and

exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for

group portraits to prevent the camera from focusing on the background. Intelligent Face Detection

also oﬀers a red-eye removal option for removing “red-eye” eﬀects caused by the ﬂash.

Turn Intelligent Face Detection on.

Opption

OFF

Descrippttion

Intelligent Face Detection oﬀ.

Intelligent Face Detection on.

1.1 Press MENU/OK to display the

shooting menu.

1.5 Press MENU/OK to select the

highlighted option and return

to shooting mode.

SHOOTING MENU

SHOOTING MODE

ISO

IMAGE SIZE

IMAGE QUALITY

FINEPIX COLOR

WHITE BALANCE

AUTO

A B icon appears in the

monitor when Intelligent Face

Detection is on.

COMPLETED

1.2 Press the selector up or

down to highlight 3 FACE

Note

DETECTION.

When removing red-eye eﬀect, select ON for a RED

EYE REMOVAL in the setup menu (pg. 84).

1.3 Press the selector right

to display Intelligent Face

Detection options.

1.4 Press the selector up or down

to highlight the desired option.

Download from Www.Somanuals.com. All Manuals Search And Download.

B Intelligent Face Detection and Red-Eye Removal

Frame the picture.

Shoot.

If a face is detected, it will be indicated by

a green border. If there is more than one

face in the frame, the camera will select the

face closest to the center; other faces are

indicated by white borders.

Press the shutter button all the

way down to shoot.

Intelligent Face Detection

Intelligent Face Detection is

recommended when using the

self-timer for group portraits or

self-portraits (pg. 37).

When a picture taken with Intelligent Face Detection

is displayed, the camera can automatically select

faces for image search (pg. 68), slide shows (pg. 74),

cropping (pg. 76), red-eye removal (pg. 74), printing

(pg. 51), and zoom (continuous) (pg. 87).

Green border

Focus.

Press the shutter button halfway

to set focus and exposure for

the subject in the green border.

Download from Www.Somanuals.com. All Manuals Search And Download.

B Intelligent Face Detection and Red-Eye Removal

Cautions

• If no face is detected when the shutter-release

button is pressed halfway (pg. 95), the camera will

focus on the subject at the center of the monitor

and red-eye will not be removed. If the camera

is unable to detect a face, turn Intelligent Face

Detection oﬀ and use focus lock (pg. 30).

• If the subject moves as the shutter button is pressed,

their face may not be in the area indicated by the

green border when the picture is taken.

•

In each shooting mode, the camera will detect and

focus on faces but exposure will be optimized for the

entire scene rather than the selected portrait subject.

Tip: Red-Eye Removal

Select ON for the R SAVE ORG IMAGE option in the

setup menu (pg. 85) to save unprocessed copies of

pictures created with red-eye removal.

Download from Www.Somanuals.com. All Manuals Search And Download.

Focus Lock

To compose photographs with oﬀ-center subjects:

Position the subject in the focus frame.

Recompose the picture.

Keeping the shutter button pressed

halfway, recompose the picture.

Focus.

250

F4.0

Press the shutter button halfway to set

focus and exposure. Focus and exposure

will remain locked while the shutter button

is pressed halfway (AF/AE lock).

Shoot.

Press the shutter-release button the rest of

the way down to take the picture.

250

F4.0

Press the rest of

the way down

Press

halfway

Repeat steps 1 and 2 as desired to refocus

before taking the picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

Focus Lock

Autofocus

Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects

listed below. If the camera is unable to focus using autofocus, use focus lock (pg. 30) to focus on another

subject at the same distance and then recompose the photograph.

• Very shiny subjects such as mirrors or car bodies.

• Fast-moving subjects.

• Subjects photographed through a window or other reﬂective object.

• Dark subjects and subjects that absorb rather than reﬂect light, such as hair or fur.

• Insubstantial subjects, such as smoke or ﬂame.

• Subjects that show little contrast with the background (for example, subjects in clothing that is the same

color as the background).

• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a

subject photographed against a backdrop of highly contrasting elements).

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Exposure Compensation

Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.

Return to shooting mode.

Press MENU/OK to return to

shooting mode.

Press 5 (exposure compensation).

The exposure indicator will be displayed.

Take pictures.

SET

1000

F4.0

ANote

A 5 icon and exposure indicator are displayed at

settings other than 0. Exposure compensation is not

reset when the camera is turned oﬀ; to restore normal

exposure control, choose a value of 0.

Choose a value.

Press the selector button. The eﬀect is

visible in the display.

Choose positive (+) values

to increase exposure

Choose negative (–) values

to reduce exposure

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Exposure Compensation

Choosing an Exposure Compensation Value

• Backlit subjects: choose values from + ³EV to +1 3 EV (for an explanation of the term “EV”,

see the Glossary on page 104)

• Highly reﬂective subjects or very bright scenes (e.g., snowﬁelds): +1EV

• Scenes that are mostly sky: +1EV

• Spotlit subjects (particularly if photographed against dark backgrounds): – 3 EV

• Subjects with low reﬂectivity (pine trees or dark-colored foliage): – 3 EV

Download from Www.Somanuals.com. All Manuals Search And Download.

L Macro mode (Close-ups)

To select macro mode, press the selector left (L).

L icon appears in

monitor when camera

is in macro mode

When macro mode is in eﬀect, the camera focuses on subjects near the center of the monitor. Use

the zoom buttons to frame pictures.

Note

Use of a tripod is recommended to prevent blur caused by camera shake.

Download from Www.Somanuals.com. All Manuals Search And Download.

K Using the Flash (Intelligent Flash)

When the ﬂash is used, the camera’s Intelligent Flash system instantly analyzes the scene based on

such factors as the brightness of the subject, its position in the frame, and its distance from the

camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed

while preserving the eﬀects of ambient background lighting, even in dimly-lit indoor scenes. Use the

ﬂash when lighting is poor, for example when shooting at night or indoors under low light.

To choose a ﬂash mode, press the selector right (K). In modes other than

AUTO, the current mode is indicated by an icon in the monitor. Choose

from the following options (some options are not available in all shooting

modes):

Modde

Descrippttion

AUTO (no icon) The ﬂash ﬁres when required. Recommended in most situations.

The ﬂash ﬁres whenever a picture is taken. Use for backlit subjects or for natural coloration

when shooting in bright light.

K (ﬁll ﬂash)

W (suppressed The ﬂash does not ﬁre even when the subject is poorly lit.

will appear in the monitor at

ﬂ a s h )

slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recommended.

Capture both the main subject and the background when shooting at night (note that

T (slow sync) brightly lit scenes may be overexposed). If Uis selected for A SHOOTING MODE, shutter

speed may be slow. Use a tripod.

Caution

The ﬂash may ﬁre several times with each shot. Do not move the camera until shooting is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

K Using the Flash (Intelligent Flash)

U Silent Mode

Red-Eye Removal

Silent mode is useful in situations in which camera

sounds or the light of the ﬂash may be unwelcome.

To turn silent mode on, press and hold the DISP/BACK

button until U is displayed, or change the setting in

the setup menu (pg. 84).

If intelligent face detection is selected in the

shooting menu (pg. 27) while a RED EYE

REMOVAL is set to ON in the setup menu (pg. 84),

red-eye removal is used for pictures taken when the

ﬂash ﬁres. Red-eye removal minimizes

“red-eye” caused when light from the

ﬂash is reﬂected from the subject’s

retinas as shown in the illustration at

right.

While silent mode is turned on, the ﬂash does not

ﬁre (except when using A mode), operation

sounds and the shutter sound are not heard, the

sound is muted when playing back movies or voice

memos, and the self-timer lamp and shooting

indicator do not light.

• U is displayed while silent mode is turned on.

• Press and hold the DISP/BACK button to turn silent

mode oﬀ.

• Flash, operation sounds (pg. 84), shutter sound

(pg. 84), and playback volume (pg. 89) settings

cannot be changed while silent mode is turned on.

• Silent mode cannot be turned on or oﬀ while

playing back movies or voice memos.

Download from Www.Somanuals.com. All Manuals Search And Download.

J Using the Self-Timer

The camera oﬀers four types of self-timer mode,

which enable group portraits, self-portraits and

reduction of camera shake.

COUPLE TIMER

The picture is taken automatically when 2 faces

come close together.

Set the self-timer mode to xCOUPLE TIMER.

Press E. Each time E is pressed, the setting for

zDISTANCE changes.

Setting the Self-Timer

To change the self-timer mode, press J.

: NEAR

: CLOSE UP

zzz: SUPER CLOSE

CANCEL

The more zicons, the closer the 2 faces must

be when taking a picture.

As the 2 faces come closer and the z

indicator(s) becomes full, countdown starts.

Then the picture is automatically taken.

Tips

• Pressing DISP/BACK cancels xCOUPLE TIMER.

• Set Macro mode (close-up) when taking a self

portrait by holding the camera.

Download from Www.Somanuals.com. All Manuals Search And Download.

J Using the Self-Timer

GROUP TIMER

The picture is taken automatically when all

10 SEC/ 2 SEC

Set the self-timer mode to c 10 SEC or b 2

members get together.

SEC.

Set the self-timer mode to yGROUP TIMER.

Press E. Each time E is pressed, the setting for

SNUMBERS changes.

Focus.

Press the shutter button halfway

to focus.

Available setting for Group

timer is 1 to 4 persons.

Caution

Stand behind the camera when using the

shutter button. Standing in front of the lens can

interfere with focus and exposure.

CANCEL

Start the timer.

When the camera recognizes the set number

of persons and the Sindicator(s) becomes

full, countdown starts. Then the picture is

automatically taken.

Press the shutter button the

rest of the way down to start

the timer. The display

in the monitor shows

Tips

the number of seconds

remaining until the

shutter is released. To

stop the timer before

the picture is taken,

press DISP/BACK.

• Pressing DISP/BACK cancels yGROUP TIMER.

• Set Macro mode (close-up) when taking a self

portrait by holding the camera.

Download from Www.Somanuals.com. All Manuals Search And Download.

J Using the Self-Timer

The self-timer lamp on the front of the

camera will blink immediately before the

picture is taken. If the two-second timer

is selected, the self-timer lamp will blink as

the timer counts down.

Intelligent Face Detection

Because it ensures that the faces of portrait

subjects will be in focus, Intelligent Face Detection

(pg. 27) is recommended when using the self-timer

for group portraits or self-portraits. To use the self-

timer with Intelligent Face Detection, set the timer

as described in Step 1 and then press the shutter

button all the way down to start the timer. The

camera will detect faces while the timer is counting

down and adjust focus and exposure immediately

before the shutter is released. Be careful not to

move until the picture has been recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

Single-Frame Playback

To view the most recent picture in the monitor,

Choosing a Display Format

press the D button.

Press the DISP/BACK button to turn playback

indicators on and oﬀ.

100 0001

ISO

100

12 / 31 / 2050

1/250 F4.0

10 : 00 AM

1 ²

Press the selector right to view

100-0001

100

ISO

pictures in the order recorded, left to

view pictures in reverse order. Keep

the selector pressed to scroll rapidly

to the desired frame.

12 / 31 / 2050

1/250 F4.0

10 : 00 AM

1 ²

Indicators displayed

Indicators hidden

Image search

You can use the image search feature to

search for pictures based on a variety of search

criteria. See IMAGE SEARCH (pg. 68) for more

information.

Note

Pictures taken using other cameras are indicated by a e (“gift image”) icon during playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Single-Frame Playback

Playback Zoom

Press T to zoom in on images

displayed in single-frame playback;

press W to zoom out.

Note

The maximum zoom ratio varies with image size.

Playback zoom is not available with pictures taken

in N mode or at an image size of p, or v blog

images.

Press W to zoom out

Press T to zoom in

Intelligent Face Detection

If the current picture was

taken using Intelligent Face

Detection (pg. 27), B will

appear in the monitor. Press

Zoom indicator

FACE ZOOM

BACK

the F button to cycle

When the picture is zoomed in, the

selector can be used to view areas of

the image not currently visible in the

display.

through the subjects detected by Intelligent Face

Detection, or use the W and T buttons to zoom the

current subject in and out as described above.

Navigation window shows

portion of image currently

displayed in monitor

Press DISP/BACK to exit zoom.

Download from Www.Somanuals.com. All Manuals Search And Download.

Multi-Frame Playback

To change the number of images

displayed, press W when a picture is

shown full-frame in the monitor.

Use the selector to highlight images and press

MENU/OK to view the highlighted image full frame.

In the nine- and hundred-frame displays, press

the selector up or down to view more pictures.

Tip: Two-Frame Display

Two-frame display can be used

to compare pictures taken in

A NATURAL & K (dual shot)

mode.

12 / 31 /2050 10:00 AM

Press the

W button

to increase

the number

of pictures

displayed to

two, nine, or a

hundred.

Press T to reduce

the number

of images

displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

M Deleting Pictures

The ERASE option in the playback menu can be used to delete still pictures and movies, increasing

the amount of space available on the memory card or in internal memory (for information on

deleting pictures in single-frame playback, see page 21). Note that deleted pictures can not be

recovered. Copy important pictures to a computer or other storage device before proceeding.

Press MENU/OK to display the

playback menu.

Press the selector up or down to

highlight FRAME or ALL FRAMES.

PLAYBACK MENU

IMAGE SEARCH

ERASE

EDIT FOR BLOG

MARK FOR UPLOAD TO

Press MENU/OK to display options for

the selected item (see pg. 44).

SLIDE SHOW

SET

RED EYE REMOVAL

COMPLETED

Tips: Deleting Pictures

Press the selector up or down to

highlight M ERASE.

• When a memory card is inserted, pictures will be

deleted from the memory card; otherwise, pictures

will be deleted from internal memory.

• Protected pictures can not be deleted. Remove

protection from any pictures you wish to delete (pg.

75).

• If a message appears stating that the selected

images are part of a DPOF print order, press MENU/OK

to delete the pictures.

Press the selector right to display

delete options.

PLAYBACK MENU

IMAG

ERAS

EDIT

MARK

SLIDE

RED

BACK

FRAME

ALL FRAMES

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

M Deleting Pictures

■ FRAME: Deleting Selected Images

Selecting FRAME displays the

dialog shown at right.

■ ALL FRAMES: Deleting All Images

ERASE OK?

Selecting ALL FRAMES

displays the conﬁrmation

shown at right.

YES

CANCEL

SET

CANCEL

Press the selector left or right

to scroll through pictures and

press MENU/OK to delete the

current picture (the picture

is deleted immediately; be

careful not delete the wrong

picture).

Press MENU/OK to delete all

unprotected pictures.

The dialog shown at right is

displayed during deletion.

Press DISP/BACK to cancel

before all pictures have

been deleted (any pictures

deleted before the button

was pressed can not be

recovered).

CANCEL

Press DISP/BACK to exit when all the desired

pictures have been deleted.

Download from Www.Somanuals.com. All Manuals Search And Download.

A Recording Movies

The A button can be used to shoot short movies in all shooting modes except N. Sound is

recorded via the built-in microphone; do not cover the microphone during recording.

Frame the scene using the zoom

buttons.

Press the A button to start

recording.

and time

Zoom indicator

REC

12s

remaining are

displayed in

monitor

Optical zoom can not be adjusted once

recording begins.

Press the A button again to

end recording. Recording ends

automatically when the movie

reaches maximum length or

memory is full.

Choosing the Frame Size

To choose the frame size,

press MENU/OK and select

d MOVIE QUALITY.

SHOOTING MENU

CONT

FACE

1280 5m00s

AF M

MOVI

10m59s

15m00s

Choose ) 1280 (1280×720

pixels) for high-deﬁnition

movies, ! (640×480 pixels) for standard

quality, 9 (320×240 pixels) for longer movies.

Press MENU/OK to return to movie recording

mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

A Recording Movies

Notes

Press the A button to begin

recording a clip.

• See below for information on recording movies in

R mode.

• Focus is set when recording begins; exposure

and white balance are adjusted automatically

throughout recording. The color and brightness

of the image may vary from that displayed before

recording begins.

• Any sound that the camera makes while recording a

movie may be heard when playing back the movie.

• If the subject is too bright, horizontal or vertical lines

may be seen when playing back the movie. This is

not a malfunction.

1 and time

REC

remaining are displayed in

monitor. Time remaining

displayed in yellow if less

than 5 s remain.

Note

If a clip reaches maximum length, shooting will

end and the clips recorded to that point will be

joined together into a single movie.

R Successive Movie

Join a series of movies into one movie (up to 60

seconds long).

Press the A button again to

end the clip. Repeat steps 3

and 4 to record additional clips.

To pause, press MENU/OK.

Do not insert or remove memory cards

while recording is paused. While recording

is paused, the camera can be turned oﬀ or

other modes selected. Recording can be

resumed as described below.

While using shooting mode (pg. 22), select

R SUCCESSIVE MOVIE and press MENU/OK.

Press DISP/BACK to turn successive movie

mode on and oﬀ.

Download from Www.Somanuals.com. All Manuals Search And Download.

A Recording Movies

Tip: Previewing the Most Recent Clip

When a clip is completed,

the ﬁrst frame appears in the

monitor. To preview the clip,

press the selector up. Press

15s

STANDBY

1280

RECORD

FINISH

PREVIEW

RETRY

DISP/BACK to re-record the last

clip.

Press F to display the

conﬁrmation message, select

OK, then press MENU/OK to end

recording and join the clips

together.

Resuming Recording

To resume a paused successive movie, select

R SUCCESSIVE MOVIE for A SHOOTING

MODE and highlight CONTINUE. Press MENU/OK

and continue recording as described in steps 2–5.

Tip: During Recording

15s

STANDBY

1280

When recording is resumed,

the three most recent clips are

shown in the monitor, with the

most recent clip at the top.

RECORD

FINISH

Download from Www.Somanuals.com. All Manuals Search And Download.

D Viewing Movies

During playback (pg. 40),

movies are displayed in the

monitor as shown at right.

The following operations

can be performed while a

movie is displayed:

Progress is shown in the monitor during play-

back.

100-006

1280

15s

12 / 31 / 2050 10:00 AM

PLAY

Progress bar

STOP

PAUSE

Oppeerraattiion

Descrippttion

Start/pause Press the selector down to start playback.

playback Press again to pause.

Tip: Viewing Movies on a Computer

Copy movies to the computer before viewing.

Press the selector up to end playback. If

playback is not in progress, pressing

the selector up will delete the current

movie.

End

playback/

delete

Note

Fast forward and rewind are not available.

Cautions

Press the selector right to advance, left

Do not cover the speaker during playback.

to rewind. If playback is paused,

Advance/

the movie will advance or rewind

rewind

one frame each time the selector is

pressed.

Press MENU/OK to pause playback and

display volume controls. Press the

Adjust

selector up or down to adjust the

volume

volume; press MENU/OK again to set the

volume.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures on TV

Connect the camera to a TV and tune the television to the video channel to show pictures and slide

shows (pg. 74) to a group.

Note

Connect an A/V cable (optional), as shown

below.

Image quality deteriorates slightly during movie

playback.

Connect yellow plug

to video-in jack

Cautions

• When making the A/V cable connection, be sure the

connectors are fully inserted.

• If the optional A/V cable is used to connect the

camera to the TV, high-deﬁnition movies will be

displayed in standard deﬁnition.

• An optional video cable is required to view high-

deﬁnition movies on a high-deﬁnition TV. For more

information, refer to: http://www.fujifilm.com/

products/digital_cameras/index html.

Connect white plug

Insert into multi-connector

to audio-in jack

adapter port

Tune the television to the video channel.

The camera monitor turns oﬀ and pictures,

voice memos, and movies are played back on

the TV. Note that the camera volume controls

have no eﬀect on sounds through the TV; use

the television volume controls to adjust the

volume.

Press the D for about a second to turn the

camera on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Printing Pictures via USB

If the printer supports PictBridge, the camera can be connected directly to a printer and

pictures can be printed without ﬁrst being copied to a computer. Note that depending

on the printer, not all the functions described below may be supported.

Connecting the Camera

Printing Selected Pictures

Press the D for about a second to turn the

camera on.

Press the selector left or right to

display a picture you wish to print.

Note

Be sure the battery is inserted for proper connection.

Press the selector up or down to

choose the number of copies (up to

99).

Connect the supplied USB cable as shown

and turn the printer on.

Repeat steps 1–2 to select

additional pictures. Press MENU/OK

to display a conﬁrmation dialog

when settings are complete.

w USB will be displayed in the monitor,

followed by the PictBridge display shown

below at right.

PR NT THESE FRAMES

TOTAL : 9 SHEETS

USB

PICTBRIDGE

TOTAL : 00000

YES

CANCEL

Press MENU/OK to start printing.

00 SHEETS

FRAME

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

Printing Pictures via USB

Tip: Printing the Date of Recording

Printing the DPOF Print Order

To print the print order created with r PRINT

ORDER (DPOF) in the playback menu (pg. 53):

To print the date of recording on pictures, press

DISP/BACK in steps 1–2 to display the PictBridge

menu (see “Printing the DPOF Print Order,” below).

Press the selector up or down to highlight PRINT

WITH DATE y and press MENU/OK to return to the

PictBridge display (to print pictures without the date

of recording, select PRINT WITHOUT DATE). The

date will not be printed if the camera clock was not

set when the picture was taken.

In the PictBridge display, press DISP/

BACK to open the PictBridge menu.

PICTBRIDGE

PRINT WITH DATE

PRINT WITHOUT DATE

PRINT DPOF

Note

If no pictures are selected when the MENU/OK button is

pressed, the camera will print one copy of the current

picture.

Press the selector up or down to

highlight x PRINT DPOF.

Press MENU/OK to display a

conﬁrmation dialog.

PRINT DPOF OK?

TOTAL : 9 SHEETS

YES

CANCEL

Press MENU/OK to start printing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Printing Pictures via USB

Notes

During Printing

• Print pictures from internal memory or a memory

card that has been formatted in the camera.

• If the printer does not support date printing, the

PRINT WITH DATE y option will not be available

in the PictBridge menu and the date will not be

printed on the pictures in the DPOF print order.

• Default border/borderless setting, printer page size

and print quality settings are used when printing via

direct USB connection.

The message shown at right is

displayed during printing. Press

DISP/BACK to cancel before all

pictures are printed (depending

on the printer, printing may end

PRINTING

CANCEL

before the current picture has printed).

If Printing is interrupted, disconnect the USB cable

from the camera, turn oﬀ the camera, and then

repeat the steps on page 50.

Disconnecting the Camera

Conﬁrm that “PRINTING” is not displayed in the

monitor and disconnect the USB cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Printing Pictures via USB

Creating a DPOF Print Order

Press MENU/OK and follow the steps below.

The r PRINT ORDER (DPOF) option in the

playback menu can be used to create a digital

“print order” for PictBridge-compatible printers

(pg. 50) or devices that support DPOF.

Press the selector left or right

to display a picture you wish to

include in or remove from the print

order.

DPOF

DPOF (Digital Print Order Format) is standard

that allows pictures to be printed from

“print orders” stored in internal memory

or on a memory card. The information in the order

includes the pictures to be printed and the number

of copies of each picture.

Press the selector up or down to

choose the number of copies (up to

99). To remove a picture from the

order, press the selector down until

the number of copies is 0.

PRINT ORDER (DPOF)

DPOF:00001

Total number of prints

Number of copies

■WITH DATE y/ WITHOUT DATE

To modify the DPOF print order, select r PRINT

ORDER (DPOF) in the playback menu and press

the multi selector up or down to highlight WITH

DATE y or WITHOUT DATE.

01 SHEETS

FRAME

SET

Tip: Intelligent Face Detection

If the current picture was created with Intelligent Face

Detection, pressing F sets the number of copies to

the number of faces detected.

PLAYBACK MENU

WITH DATE y: Print date of

recording on pictures.

TRAN

WITH DATE

MOVI

WITHOUT DATE

RESET ALL

SET

WITHOUT DATE: Print pictures

without date.

Download from Www.Somanuals.com. All Manuals Search And Download.

Printing Pictures via USB

Repeat steps 1–2 to complete the

print order. Press MENU/OK to save

the print order when settings

are complete, or DISP/BACK to exit

without changing the print order.

■RESET ALL

To cancel the current print

order, select RESET ALL in the

r PRINT ORDER (DPOF)

menu. The conﬁrmation

shown at right will be

RESET DPOF OK?

YES

CANCEL

The total number of prints is

displayed in the monitor. Press

MENU/OK to exit.

displayed; press MENU/OK to remove all pictures

from the order.

Notes

100 0001

The pictures in the current

print order are indicated by a

x icon during playback.

• Remove the memory card to create or modify a print

order for the pictures in internal memory.

• Print orders can contain a maximum of 999 pictures.

100

RESET DPOF OK?

12 / 31 / 2050

1/250 F4.0

10 : 00 AM

• If a memory card is inserted

1 ²

containing a print order created

by another camera, the message

shown at right will be displayed.

YES

Pressing MENU/OK cancels the

print order; a new print order must be created as

described above.

• The printer’s settings may determine whether

shooting dates are printed or not printed. Check the

printer’s settings if necessary.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures on a Computer

The supplied software can be used to copy pictures to a computer, where they can be stored,

viewed, organized, and printed. Before proceeding, install the software as described below. Do NOT

connect the camera to the computer until installation is complete.

Installing the Software

Two applications are supplied: MyFinePix Studio for Windows and FinePixViewer for the Macintosh.

Installation instructions for Windows are on pages 55–56, those for the Macintosh on pages 57–58.

Windows: Installing My FinePix Studio

Conﬁrm that the computer meets the following system requirements:

Windows 7*

Windoowss Vista*

Windows XP*

2GHz Pentium 4 or better

512MB or more

CPU

RAM

Free disk space

3GHz Pentium 4 or better

1GB or more

15GB or more

2GB or more

• 1024×768 pixels or more with 24-bit color or better

• A graphics processing unit (GPU) that supports DirectX 7 or later

Video

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56kbps or faster recommended) required to use FinePix Internet Service; Internet

connection and e-mail software required to use e-mail option

Other

* Other versions of Windows are not supported. Only pre-installed operating systems are supported;

operation is not guaranteed on home-built computers or computers that have been upgraded from earlier

versions of Windows.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures on a Computer

Start the computer. Log in to an account with administrator privileges before proceeding.

Exit any applications that may be running and insert the installer CD in a CD-ROM drive.

Windows 7/Windows Vista

If an AutoPlay dialog is displayed, click SETUP.exe. A “User Account Control” dialog will then be displayed;

click Yes (Windows 7) or Allow (Windows Vista).

The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-

structions to install MyFinePix Studio.

If the Installer Does Not Start Automatically

If the installer does not start automatically, select Computer or My Computer from the Start menu, then

double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click SETUP or SETUP.exe.

If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-

plete installation.

Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer

CD in a dry location out of direct sunlight in case you need to re-install the software. The

version number is printed at the top of the CD label for reference when updating the software or

contacting customer support.

Installation is now complete. Proceed to “Connecting the Camera” on page 59.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures on a Computer

Macintosh: Installing FinePixViewer

Conﬁrm that the computer meets the following system requirements:

CPU

PowerPC or Intel

Pre-installed versions of Mac OS X version 10.3.9–10.6

(for the latest information, visit http://www.fujifilm.com/)

256MB or more

RAM

Free disk spaace A minimum of 200MB required for installation with 400MB available when FinePixViewer is running

Video

800×600 pixels or more with thousands of colors or better

• Built-in USB port recommended. Operation is not guaranteed other USB ports.

• Internet connection (56kbps or faster recommended) required to use FinePix Internet Service; Internet

connection and e-mail software required to use e-mail option

Other

After starting the computer and quitting any applications that may be running, insert the installer

CD in a CD-ROM drive and double-click Installer for Mac OS X.

An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter

an administrator name and password when prompted and click OK, then follow the on-screen

instructions to install FinePixViewer. Click Exit to quit the installer when installation is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures on a Computer

Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD

if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry

location out of direct sunlight in case you need to re-install the software. The version number

is printed at the top of the CD label for reference when updating the software or contacting

customer support.

Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select

Preferences… from the Image Capture application menu. The Image Capture preferences dialog

will be displayed; choose Other… in the When a camera is connected, open menu, then select

FPVBridge in the “Applications/FinePixViewer” folder and click Open. Quit Image Capture.

Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start Image

Capture. The camera will be listed under DEVICES; select the camera and choose FPVBridge

from the Connecting this camera opens menu and click Open. Quit Image Capture.

Installation is now complete. Proceed to “Connecting the Camera” on page 59.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures on a Computer

Connecting the Camera

If the pictures you wish to copy are stored

Press the D for about a second to turn

the camera on. MyFinePix Studio or

FinePixViewer will start automatically; follow

the on-screen instructions to copy pictures

to the computer. To exit without copying

pictures, click Cancel.

on a memory card, insert the card into the

camera (pg. 9). If no card is inserted, pictures

will be copied from internal memory.

Note

Windows users may require the Windows CD

when starting the software for the ﬁrst time.

Caution

If the software does not start automatically, it may not

be correctly installed. Disconnect the camera and

reinstall the software.

For more information on using the supplied software,

start the application and select the appropriate option

from the Help menu.

Loss of power during transfer could result in loss

of data or damage to internal memory or the

memory card. Check the battery level.

Turn the camera oﬀ and connect the supplied

USB cable as shown, making sure the

connectors are fully inserted. Connect the

camera directly to the computer; do not use a

USB hub or keyboard.

Download from Www.Somanuals.com. All Manuals Search And Download.

Viewing Pictures on a Computer

Cautions

Disconnecting the Camera

• If a memory card containing a large number of

images is inserted, there may be a delay before the

software starts and you may be unable to import or

save images.

Use a memory card reader to transfer pictures.

• Opening or closing the lens cover during transfer

could result in loss of data or damage to internal

memory or the memory card.

• Disconnect the camera before inserting or removing

memory cards.

• In some cases, it may not be possible to access

pictures saved to a network server using the

supplied software in the same way as on a

standalone computer.

Follow the on-screen instructions to turn the camera

oﬀ and disconnect the USB cable.

Uninstalling the Supplied Software

Only uninstall the supplied software when it is no

longer required or before beginning reinstallation.

After quitting the software and disconnecting

the camera, drag the “FinePixViewer” folder from

“Applications” into the Trash and select Empty Trash

in the Finder menu (Macintosh), or open the control

panel and use “Programs and Features” (Windows7/

Windows Vista) or “Add or Remove Programs”

(Windows XP) to uninstall MyFinePix Studio. Under

Windows, one or more conﬁrmation dialogs may be

displayed; read the contents carefully before clicking

OK.

• The user bears all applicable fees charged by the

phone company or Internet service provider when

using services that require an Internet connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Shooting Menu

The shooting menu is used to adjust settings for a wide range of shooting conditions.

Using the Shooting Menu

Press MENU/OK to display the

shooting menu.

Press the selector right to display

options for the highlighted item.

SHOOTING MENU

SHOOTING MODE

ISO

AUTO

SCENE RECOGNITION

IMAGE SIZE

IMAGE QUALITY

FINEPIX COLOR

WHITE BALANCE

AUTO

Selects optimum

camera settings

for certain modes.

COMPLETED

SET

CANCEL

Note

The options displayed in the shooting menu vary

depending on the shooting mode.

Press the selector up or down to

highlight the desired option.

Press the selector up or down to

highlight the desired menu item.

Press MENU/OK to select the

highlighted option.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Shooting Menu

Shooting Menu Options

Menu item

Description

Options

Default

G/k/P/A/B/C/V/K/L/

D/U/E/F/G/I/O/P/N/

Choose a shooting mode according to the type of

subject (pg. 22).

SHOOTING MODE

Adjust ISO sensitivity (pg. 63). Choose higher values

when the subject is poorly lit.

AUTO/1600/800/

400/200/100

ISO

AUTO

y/r3:2/g16:9/0/n/

IMAGE SIZE

Choose image size (pg. 63).

NORMAL

STD

16:9/m/p

T IMAGE QUALITY

Choose image quality (pg. 64).

FINE/NORMAL

Shoot pictures in standard color, saturated color,

black-and-white, or sepia (pg. 64).

FINEPIX COLOR

STD/M/N/f

WHITE BALANCE Adjust color for diﬀerent light sources (pg. 65).

AUTO

OFF

AUTO/p/q/s/t/u/r

ON/OFF

CONTINUOUS

Shoot a series of pictures (pg. 65).

Turn Intelligent Face Detection and red-eye removal

on or oﬀ (pg. 27).

FACE DETECTION

ON/OFF

—

AF MODE

Choose how the camera selects a focus area (pg. 66).

Choose the frame size for movies (pg. 45).

w/X

MOVIE QUALITY

) 1280/!/9

Download from Www.Somanuals.com. All Manuals Search And Download.

The Shooting Menu

n ISO

o IMAGE SIZE

Control the camera’s sensitivity to light with P.

Higher values can be used to reduce blur when

lighting is poor; note, however, that mottling

Choose the size at which still pictures are

recorded. Large pictures can be printed at large

sizes with no drop in quality; small pictures

may appear in pictures taken at high sensitivities. require less memory, allowing more pictures to

If AUTO is selected, the camera will adjust

sensitivity automatically in response to shooting

conditions.

be recorded.

Opption

Prints at siizes up to

31×23cm/12.2×9in. (y) or 31×21cm/

12.2×8.2in. (r3 : 2). Choose y for high-

quality prints, r3 : 2 for an aspect ratio of

3:2, g16:9 for an aspect ratio of 16:9.

Settings other than AUTO

800

3 : 2

are shown by an icon in the

monitor if you use P.

16 : 9

22×16cm (8.7×6in.)

16 : 9 17×13cm (7×5.1in.)

14×10cm (5.5×3.9in.)

5×4cm (1.9×1.5in.). Suited to e-mail or the

web.

The number of pictures that can be taken at

current settings (pg. 105) is displayed to the right

of the image quality icon in the monitor.

Note

Image size is not reset when the camera is turned oﬀ

or another shooting mode is selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Shooting Menu

p FINEPIX COLOR

Aspect Ratio

Enhance contrast and color saturation or take

pictures in black and white or sepia.

Pictures taken at an image size setting of r3 : 2

have an aspect ratio of 3:2, the same as a frame of

35-mm ﬁlm. Pictures taken at an image size setting

of g16:9 or m16:9 have an aspect ratio of 16:9.

Pictures taken at other settings have an aspect ratio

of 4:3.

Opption

Displaayed iin

Standard contrast and saturation.

Recommended in most situations.

Vivid contrast and color. Choose

for vivid shots of ﬂowers or

v-STANDARD

enhanced greens and blues in

landscapes. Available only in k, P,

A, B, N, and R modes.

Take pictures in black and white.

Take pictures in sepia.

Mv-CHROME

Nv-B&W

fv-SEPIA

4 : 3

3 : 2

Settings other than v-STANDARD are shown

by an icon in the monitor.

Notes

• FINEPIX COLOR is not reset when the camera is

turned oﬀ or another shooting mode is selected.

• Depending on the subject, the eﬀects of

16 : 9

T IMAGE QUALITY

Mv-CHROME may not be visible in the monitor.

Choose how much image ﬁles are compressed.

Select FINE (low compression) for higher image

quality, NORMAL (high compression) to increase

the number of pictures that can be stored.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Shooting Menu

C WHITE BALANCE

E CONTINUOUS (Continuous shooting)

For natural colors, choose a setting that matches While the shutter button is pressed, the camera

the light source (for an explanation of “white

balance,” see the Glossary on page 104).

takes up to three pictures.

Notes

• Focus and exposure are determined by the ﬁrst

frame in each series.

• The number of pictures that can be recorded

depends on the memory available. Additional time

may be required to record pictures when shooting

Opption

Displaayed in

AUTO White balance adjusted automatically.

For subjects in direct sunlight.

For subjects in the shade.

Use under “daylight” ﬂuorescent lights.

Use under “warm white” ﬂuorescent lights.

Use under “cool white” ﬂuorescent lights.

Use under incandescent lighting.

ends. The pictures are displayed

STOR NG

in the monitor while recording is

in progress.

If AUTO does not produce the desired results

(for example, when taking close-ups), choose the

option that matches the light source.

Note

Results vary with shooting conditions. Play pictures

back after shooting to check colors in the monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Shooting Menu

F AF MODE

■FAF MODE: XTRACKING

Position the subject in the

center focus area and press

G to lock on to the subject.

Once the subject is locked,

the camera will track the

subject as it moves through

SHOOTING MENU

800

In shooting mode P or A,

this option controls how

the camera focuses when

Intelligent Face Detection is

oﬀ (pg. 27). Regardless of the

CONT

FACE

CENTER

TRACKING

AF M

MOVI

START TRACKING

1000

F4.0

800

option selected, the camera will focus on the

subject in the center of the monitor when macro the frame. Press G again to

mode is on (pg. 34).

cancel tracking.

CANCEL

1000 F4.0

■FAF MODE: wCENTER

The camera focuses on the

subject in the center of the

monitor. This option can be

used with focus lock.

Caution

Tracking is not possible in some situations.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

The playback menu is used to manage the pictures in internal memory or on the memory card.

Press the selector up or down to

highlight the desired option.

Using the Playback Menu

Press D to enter playback mode

(pg. 40).

Press MENU/OK to display the

playback menu.

Press MENU/OK to select the

highlighted option.

PLAYBACK MENU

Playback Menu Options

The following options are available:

IMAGE SEARCH

ERASE

EDIT FOR BLOG

MARK FOR UPLOAD TO

SLIDE SHOW

SET

Option

IMAGE SEARCH

ERASE

Description

Search for images based on certain

criteria (pg. 68).

RED EYE REMOVAL

COMPLETED

Press the selector up or down to

highlight the desired menu item.

Delete all or selected pictures (pg. 43).

Edit images and reduce ﬁle size. Ideal

for images that will be uploaded or

sent as e-mail attachments (pg. 69).

v EDIT FOR BLOG

Adjust the color balance and

brightness of movies (pg. 72).

Specify the destination for uploading

to YouTube™ and FACEBOOK (pg. 72).

View pictures in a slide show (pg. 74).

Press the selector right to display

options for the highlighted item.

MOVIE EDIT

MARK FOR UPLOAD TO

SLIDE SHOW

IMAGE SEARCH

Create copies with reduced red eye

(pg. 74).

RED-EYE REMOVAL

BY DATE

BY FACE

BY SCENE

Protect pictures from accidental

deletion (pg. 75).

BY TYPE OF DATA

BY UPLOAD MARK

PROTECT

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Option

CROP

Description

Create cropped copies of pictures

(pg. 76).

V IMAGE SEARCH

You can search for images

based on a variety of criteria.

Begin by selecting V IMAGE

SEARCH in the playback

menu.

PLAYBACK MENU

IMAGE SEARCH

ERASE

EDIT FOR BLOG

MARK FOR UPLOAD TO

SLIDE SHOW

j RESIZE

Reduce the size of images (pg. 77).

Rotate pictures (pg. 78).

Copy pictures between internal

memory and a memory card (pg. 79).

Add voice memos to pictures (pg. 80).

Choose the transition between

pictures during playback (pg. 82).

Create an edited copy of a movie

(pg. 82).

Select pictures for printing on DPOF-

and PictBridge-compatible devices

(pg. 51).

SET

IMAGE ROTATE

RED EYE REMOVAL

COMPLETED

COPY

VOICE MEMO

Press MENU/OK and select the

search criteria.

PTRANSITION

Criteerriiaa

BY DATE

Description

Find all pictures taken on a speciﬁed

date.

MOVIE TRIMMING

PRINT ORDER

(DPOF)

BY FACE

Find pictures based on face information.

Find all pictures that match a speciﬁed

scene.

BY SCENE

BY TYPE OF

DATA

Find all still images, movies, or images

edited for use with a blog.

BY UPLOAD

MARK

Find all images uploaded to either

YouTube or FACEBOOK.

Narrow down the criteria.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Press MENU/OK to begin searching.

The results of the search are

displayed.

v EDIT FOR BLOG

You can process still images for posting to a blog.

Select the frame (ﬁle) to process.

Searching for images

Images found when using the

image search feature can be

deleted (pg. 43), protected (pg.

75), or viewed in a slide show

(pg. 74) by pressing MENU/OK.

COUPLE

ERASE

PROTECT

SLIDE SHOW

EXIT SEARCH

Press MENU/OK to display the

playback menu.

EXIT

Select v EDIT FOR BLOG and

press MENU/OK to display the

processing menu.

ED T FOR BLOG

CROP

ASPECT RATIO

BR GHTNESS

CONTRAST

COLOR

SEPIA

SET

CANCEL

Select the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Notes

Press MENU/OK to open the setting

screen. The screen type varies,

depending on the selected menu.

• Press the W and T buttons to zoom the picture in or

out and use the selector to display the portion of the

picture you wish to save before processing it. Press

MENU/OK to crop the picture and return to the image

selection display.

• Processed images are saved at p (640×480).

• Small copies are saved using ﬁlenames that begin

with “BLOG.” During playback, small copies are

indicated by a v icon and a black border. Small

copies can not be further cropped or rotated.

Change the setting.

This step is unnecessary in some

menus.

Press MENU/OK to process the

image.

The original image remains

unaltered.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

■List of Processing menu options

Functions

Settinggs

Factory default

The image is trimmed so that only the desired area of the

image is viewable.

CROP

—

Wide image: 4:1, 8:3,

Wide image:4:3

16:9, 3:2, 4:3, 1:1, 3:4, 1:3 Tall image:3:4

Tall image: 3:1, 4:3, 1:1,

QASPECT RATIO*

Crops an image to change the aspect ratio.

3:4, 2:3, 9:16, 3:8, 1:4

BRIGHTNESS

CONTRAST

Changes the brightness of an image.

Changes the contrast of an image.

Emphasizes red and blue hues of an image. + increases red -5 to +5

hues; - increases blue hues.

Converts an image to black and white, or sepia.

Applies a mosaic eﬀect to faces in an image. If the image is

taken with Intelligent Face Detection set to ON, the eﬀect

can be applied on up to 4 faces. If the image is taken with

Intelligent Face Detection set to OFF, the eﬀect will be

applied at the center of the image.

-5 to +5

COLOR

SEPIA

0 to 5

FACE MOSAIC

—

* When a Qmenu is used, other menus cannot be used for that image.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

e MOVIE EDIT

b MARK FOR UPLOAD TO

You can process movies for posting to a blog,

using the same procedure used for processing

still images (pg. 69).

You can select still images and movies to be

uploaded later to YouTube or FACEBOOK. Begin

by selecting b MARK FOR UPLOAD TO in the

playback menu.

■List of Processing menu options

Press MENU/OK and select the

upload destination.

Functions

SEPIA

B&W

Converts the movie to sepia.

Converts the image to black and white.

Brightens the image to compensate for

backlight.

Select the still image or movie that

you will upload later, then press

MENU/OK.

Repeat this step if you want to

upload more items.

BACKLIGHT

CORRECTION

Note

Processed ﬁles are saved using ﬁle names that begin

with “EDIT”. During playback, these ﬁles are indicated

by a e icon and a black border.

When settings are complete, press

DISP/BACK.

Notes

• The upload destination (YouTube or FACEBOOK) is

displayed (pg. 3) when playing back images that

have been selected for upload.

• Still images cannot be uploaded to YouTube.

• You can also use the upload button (pg. 2) to set an

upload. Select the still image or movie that you will

upload, then press the upload button and select the

upload destination.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

■Canceling Upload Selections

■Uploading Images

You can cancel still images and movies that were

YouTube/FACEBOOK Uploader

Once you have selected images to be uploaded

to YouTube or FACEBOOK, you can upload them

using the included MyFinePix Studio software

(pg. 55).

selected to be uploaded. Begin by selecting

MARK FOR UPLOAD TO.

Press MENU/OK.

Use camera to select

images

Display a still image or movie that

was selected to be uploaded.

CANCEL MARK OK?

Use computer to

upload images

YES

CANCEL

* This feature is not available for Macintosh computers.

Press MENU/OK.

Select RESET ALL to cancel all

still images and movies that were

selected to be uploaded.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

q SLIDE SHOW

a RED EYE REMOVAL

View pictures in an automated slide show. After

choosing the background music, choose the

type of show and press MENU/OK to start. Press

DISP/BACK at any time during the show to view

on-screen help. When a movie is displayed,

movie playback will begin automatically, and the

slide show will continue when the movie ends.

The show can be ended at any time by pressing

MENU/OK.

This option is used with pictures taken using

Intelligent Face Detection to create copies that

have been processed to remove red eye.

Play the picture back in the monitor (pictures

taken with Intelligent Face Detection are

indicated by a B icon) and select a RED

EYE REMOVAL in the playback menu (pg. 41).

REMOVAL OK?

Opption

Displaayed in

Press selector left or right to go back or

skip ahead one frame. Select FADE-IN

for fade transitions between frames.

NORMAL

YES

CANCEL

FADE-IN

As above, except that camera

automatically zooms in on faces

selected with Intelligent Face

detection.

NORMAL B

FADE-IN B

MULTIPLE Display several pictures at once.

SCRAP As for MULTIPLE, except that the

BOOK VIEW pictures are chosen randomly.

SELECT BGM Choose background music.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Press MENU/OK. The message shown

below at left will be displayed while

the camera analyses the image; if

red-eye is detected, the message shown

below at right will be displayed while the

camera processes the image to create a copy

with reduced red-eye.

O PROTECT

Protect pictures from accidental deletion. The

following options are available.

■FRAME

Protect selected pictures.

Press the selector left or right to

display the desired picture.

REMOVING

DETECT NG

PROTECT OK?

UNPROTECT OK?

CANCEL

YES

CANCEL

YES

CANCEL

Notes

Picture not protected Protected picture

• Red eye may not be removed if the camera is unable

to detect a face or the face is in proﬁle. Results may

diﬀer depending on the scene. Red eye can not

be removed from pictures that have already been

processed using red-eye removal or pictures created

with other devices.

• The amount of time needed to process the image

varies with the number of faces detected.

• Copies created with a RED EYE REMOVAL are

indicated by a licon during playback.

Press MENU/OK to protect the

picture. If the picture is already

protected, pressing MENU/OK

will remove protection from the

image.

Repeat steps 1–2 to protect

additional images. Press DISP/BACK

to exit when the operation is

complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

■SET ALL

R CROP

SET ALL OK?

IT MAY TAKE A WHILE

Press MENU/OK to protect all

pictures, or press DISP/BACK

to exit without changing

picture status.

To create a cropped copy of a picture, play

the picture back and select R CROP in the

playback menu (pg. 67).

YES

CANCEL

Press the zoom buttons to zoom in and out

and use the selector to scroll the picture

until the desired portion is displayed (to exit

to single-frame playback without creating a

cropped copy, press DISP/BACK).

■RESET ALL

RESET ALL OK?

T MAY TAKE A WHILE

Press MENU/OK to remove

protection from all pictures,

or press DISP/BACK to exit

without changing picture

status.

YES

CANCEL

Zoom indicator

Navigation

CROP

window shows

If the number of pictures

aﬀected is very large, the

display at right will appear

in the monitor while the

operation is in progress.

portion of image

currently displayed

in monitor

YES

CANCEL

Tip: Intelligent Face Detection

Press DISP/BACK to exit before the operation is

complete.

CROP

If the picture was shot with

Intelligent Face Detection (pg.

27), B will be displayed in the

monitor. Press the F button

to zoom in on the selected

face.

Caution

FACE CROPP NG

YES

Protected pictures will be deleted when the memory

card or internal memory is formatted (pg. 87).

CANCEL

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Press MENU/OK. A conﬁrmation

dialog will be displayed.

j RESIZE

PLAYBACK MENU

You can create a small copy of

a picture. Begin by selecting

j RESIZE in the playback

menu.

PROTECT

CROP

RESIZE

IMAGE ROTATE

COPY

VOICE MEMO

REC OK?

Copy size is shown at the

top; if the size is p, OK

is displayed in yellow.

Larger crops produce larger

copies; all copies have an

aspect ratio of 4:3.

SET

REC

CANCEL

Press the selector up or down to highlight

t STANDARD or s SMALL.

Press MENU/OK to select the

highlighted option.

Press MENU/OK to save the cropped

copy to a separate ﬁle.

Press MENU/OK to copy the picture

at the selected size.

Note

Pictures taken with other cameras cannot be trimmed.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Press the selector down to

N IMAGE ROTATE

IMAGE ROTATE

rotate the picture 90° clockwise,

up to rotate the picture 90°

counterclockwise.

By default, pictures taken in

tall orientation are displayed

in wide orientation. Use this

option to display pictures in

the correct orientation in the

SET

CANCEL

monitor. It has no eﬀect on pictures displayed

on a computer or other device.

Notes

• Protected pictures can not be rotated. Remove

protection before rotating pictures (pg. 75).

• The camera may not be able to rotate pictures

created with other devices.

Press MENU/OK to conﬁrm the

operation (to exit without rotating

the picture, press DISP/BACK).

Press the selector left or right to

display the desired picture in the

monitor.

The next time the picture is played back, it will

automatically be rotated.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

P COPY

■FRAME

Copy selected frames.

COPY OK?

100 0001

Copy pictures between internal memory and a

memory card.

Press the selector up or down

to highlight d INTERNAL

MEMORY g x CARD (copy

YES

CANCEL

Press the selector left or right to

display the desired picture.

pictures from internal memory to

the memory card) or x CARD g

d INTERNAL MEMORY (copy pictures from

a memory card to internal memory).

Press MENU/OK to copy the picture.

Press the selector right to display

options for the highlighted item.

Repeat steps 1–2 to copy

additional images. Press DISP/BACK

to exit when the operation is

complete.

COPY

INTE FRAME

CAR ALL FRAMES

■ALL FRAMES

COPY ALL OK?

Press MENU/OK to copy all

pictures, or press DISP/BACK to

exit without copying pictures.

100 0001

Press the selector up or down to

IT MAY TAKE

A WHILE

highlight FRAME or ALL FRAMES.

YES

CANCEL

Cautions

• Copying ends when the

destination is full.

• DPOF print information is not copied (pg. 51).

Press MENU/OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Press MENU/OK to start recording.

Q VOICE MEMO

Hold the camera at a distance of

about 20cm (8in.) and face the

microphone.

To add a voice memo to a

still picture, select Q VOICE

MEMO after displaying the

picture in playback mode.

REC STANDBY

30s

RECORDING

28s

START

CANCEL

Time remaining

Blinks red

Note

Voice memos can not be added to movies or

protected pictures. Remove protection from pictures

before recording voice memos (pg. 75).

REC

RE REC

Press MENU/OK again to end

recording. Recording ends

automatically after 30 seconds.

Microphone

FINISH

REC

RE REC

Notes

PLAYBACK MENU

PROT

• If a voice memo already exists for the current picture, the options at right will be

displayed. Select RE-REC to replace the existing memo.

• Voice memos are recorded as PCM-format WAV ﬁles (pg. 104) with a maximum size of

about 480KB.

CRO

PLAY

RESI

RE REC

MAG

COPY

VOIC

SET

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

Playing Voice Memos

15s

When a picture that has a voice memo recorded for it (as indicated by

the h icon displayed during playback) is selected, you can play the

voice memo by selecting PLAY, then pressing MENU/OK.

Progress is shown

in the monitor.

Progress bar

STOP

PAUSE

Note

The camera may not play voice memos recorded with other devices.

Caution

Do not cover the speaker during playback.

Speaker

Download from Www.Somanuals.com. All Manuals Search And Download.

The Playback Menu

PTRANSITION

Choose the transition

between images during

playback.

PLAYBACK MENU

Press MENU/OK.

TRAN

MOVI

PRIN

W PE

SLIDE IN

FADE IN

OFF

SET

Pressing the selector down to

resume or pause playback, play

the movie until the last frame you

wish to include in the new movie

is displayed.

c MOVIE TRIMMING

To create a shorter copy of

the movie currently displayed

in playback mode, select

c MOVIE TRIMMING from

the playback menu.

MOVIE EDIT

0m00s

MOVIE EDIT

Indicator shows

the position of

the ﬁnal frame.

3m30s

PLAY

IN POINT

CANCEL

PAUSE

OUT POINT

BACK

Pressing the selector down to

start or pause playback, play the

movie until the ﬁrst frame you

wish to include in the new movie

is displayed.

To return to step 1 and choose a new starting

point, press DISP/BACK.

Press MENU/OK to save the edited

movie to a new ﬁle and return

to playback with the new movie

displayed.

MOVIE ED T

Indicator shows

0m00s

the position

of the starting

frame.

The original image is left as it was.

PLAY

IN POINT

CANCEL

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

Using the Setup Menu

Display the setup menu.

Adjust settings.

1 _{1.1 Press MENU/OK to display the}

3.1 Press the selector right

to display options for the

highlighted item.

menu for the current mode.

1.2 Highlight the left tab.

SET UP

IMAGE DISP.

FRAME NO.

ILLUM NATION

OPERATION VOL.

SHUTTER VOLUME

SOUND

1.5 SEC

CONT.

SET

1.3 Select 4.

COMPLETED

3.2 Press the selector up or down

to highlight an option.

SET UP

IMAGE DISP.

FRAME NO.

ILLUM NATION

OPERATION VOL.

SHUTTER VOLUME

SOUND

1.5 SEC

CONT.

SET

3.3 Press MENU/OK to select the

COMPLETED

highlighted option.

Choose an item.

3.4 Press DISP/BACK when ﬁnished

to return to the shooting

mode screen or playback

screen.

2.1 Press the selector up or down

to choose an item.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

Setup Menu Options

Menu item

Description

Options

—

k/j

Default

—

Set the camera clock (pg. 14).

e DATE/TIME

p TIME DIFFERENCE

Set the clock to local time (pg. 86).

Choose a language (pg. 14).

See page 107

ENGLISH

When silent mode is on, the ﬂash does not ﬁre (except when

using A mode), operation sounds and the shutter sound are

not heard, the sound is muted when playing back movies or

voice memos, and the self-timer lamp and shooting indicator

do not light (pg. 36).

Reset all settings except Frame number, DATE/TIME, TIME

DIFFERENCE, BACKGROUND COLOR, and VIDEO SYSTEM to default

values. A conﬁrmation dialog will be displayed, press the

selector left or right to highlight OK and press MENU/OK.

Format internal memory or memory cards (pg. 87).

Choose how long pictures are displayed after shooting (pg.

87).

Choose how ﬁles are named (pg. 88).

Turn the shooting indicator on or oﬀ (pg. 88).

Adjust the volume of camera controls.

Adjust the volume of the shutter sound.

Choose shutter, start-up, and control sounds (pg. 89).

ON /OFF

OFF

7 SILENT MODE

s RESET

—

3 SEC /1.5 SEC /

ZOOM (CONTINUOUS) /OFF

CONT. /RENEW

ON /OFF

q/m/n/o

—

m FORMAT

1.5 SEC

a IMAGE DISP.

CONT.

—

b FRAME NO.

k ILLUMINATION

d OPERATION VOL.

e SHUTTER VOLUME

j SOUND

f PLAYBACK VOLUME Adjust the volume for movie and voice memo playback (pg. 89).

—

–5 –+5

ON /OFF

Control the brightness of the monitor (pg. 89).

Turn display power saving mode on or oﬀ.

Choose the auto power oﬀ delay (pg. 89).

Reduces camera shake and moving-subject blur.

Remove “red-eye” eﬀects caused by the ﬂash.

g LCD BRIGHTNESS

h LCD MODE

o AUTO POWER OFF

Z DIGITAL IS

5 MIN /2 MIN /OFF

AUTO /OFF

2 MIN

OFF

ON /OFF

a RED EYE REMOVAL

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

Menu item

c DIGITAL ZOOM

Description

Enable or disable digital zoom (pg. 90).

Choose whether to save unprocessed copies of pictures taken

using red-eye removal.

Options

ON /OFF

Default

OFF

R SAVE ORG IMAGE

ON /OFF

OFF

Color 1 /Color 2 /Color 3

ON /OFF

Color 2

—

BACKGROUND COLOR

Choose the design of the menu screen.

Choose whether to display tool tips.

Choose a video mode for connection to a TV (pg. 49).

u GUIDANCE DISPLAY

r VIDEO SYSTEM

NTSC /PAL

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

p TIME DIFFERENCE

When travelling, use this option to switch the camera clock instantly from your home time zone to

the local time at your destination.

Specify the diﬀerence between local time

1.4 Press MENU/OK when settings

1 _{and your home time zone.}

are complete.

1.1 Press the selector up or down

Switch between local time and your

to highlight j LOCAL.

2 _{home time zone.}

To set the camera clock to local time,

highlight j LOCAL and press MENU/OK.

To set the clock to the time in your home

time zone, select k HOME. If j LOCAL

1.2 Press the selector right to

display the time diﬀerence.

is selected, j will be displayed in the

monitor for three seconds after the camera

TIME DIFFERENCE

12 / 31 / 2050 10:00 AM

enters shooting mode, and the date will be

12 / 31 / 2050 10:00 AM

displayed in yellow.

SET

CANCEL

1.3 Press the selector left or right

to highlight +, –, hours, or

minutes; press up or down

to edit. The minimum

2 / 31 / 2050 10:00 AM

After changing time zones, check that the

date and time are correct.

increment is 15 minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

m FORMAT

a IMAGE DISP.

Choose how long pictures are displayed in the

monitor after shooting.

FORMAT

FORMAT OK?

ERASE ALL DATA

Format internal memory or a

memory card. If a memory

card is inserted in the camera,

x will be displayed in the

dialog shown at right and

this option will format the memory card. If no

memory card is inserted, d will be displayed

and this option will format internal memory.

Press the selector left to highlight OK and press

MENU/OK to begin formatting.

CANCEL

• 3 SEC: Pictures are displayed for about 3s before

being recorded to the memory card.

• 1.5 SEC: Pictures are displayed for about 1.5s

before being recorded to the memory card.

• ZOOM (CONTINUOUS): Pictures are displayed until

the MENU/OK button is pressed. Pictures taken

at image sizes larger than p can be zoomed

in to check ﬁne details (see page 41). Note that

this option is disabled in continuous mode (pg.

65) and when A or N is selected for A

SHOOTING MODE.

SET

Cautions

• All data—including protected pictures—will be

deleted. Be sure important ﬁles have been copied to

a computer or other storage device.

• OFF: Pictures are not displayed automatically

after shooting.

• Do not open the battery cover during formatting.

Note

The colors displayed at settings of 3 SEC and 1.5 SEC

may diﬀer from those in the ﬁnal picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

b FRAME NO.

Frame

number

New pictures are stored in image ﬁles named using a four-digit ﬁle

number assigned by adding one to the last ﬁle number used. The ﬁle

number is displayed during playback as shown at right. FRAME NO.

controls whether ﬁle numbering is reset to 0001 when a new memory

card is inserted or the current memory card or internal memory is

formatted.

100 0001

File

number

12 / 31 / 2050

1/250 F4.0

10 : 00 AM

Directory

number

• CONT.: Numbering continues from the last ﬁle number used or the ﬁrst

available ﬁle number, whichever is higher. Choose this option to reduce the number of pictures

with duplicate ﬁle names.

• RENEW: Numbering is reset to 0001 after formatting or when a new memory card is inserted.

Notes

• If the frame number reaches 999-9999, the shutter release will be disabled (pg. 101).

• Selecting sRESET (pg. 84) does not reset frame numbering.

• Frame numbers for pictures taken with other cameras may diﬀer.

k ILLUMINATION

If ON is selected, the shooting indicator will light when the camera is turned on.

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

j SOUND

h LCD MODE

Choose the sounds used for the shutter, at start

up, and for camera controls. Press the selector

up or down to highlight an option and press

left or right to select a sound. Press MENU/OK to

select.

If ON is selected, the monitor will automatically

dim after a few seconds on inactivity to conserve

power. Monitor brightness will return to normal

when the shutter button is pressed.

The monitor will not dim when viewing pictures

or movies.

f PLAYBACK VOLUME

Adjust the volume for movie

PLAYBACK VOLUME

o AUTO POWER OFF

and voice memo playback

and slide show music. Press

the selector up or down to

adjust the volume, then press

MENU/OK.

Choose the length of time before the camera

turns oﬀ automatically when no operations

are performed. Shorter times increase battery

life; if OFF is selected, the camera must be

turned oﬀ manually. Note that regardless of

the option selected, the camera will not turn

oﬀ automatically when connected to a printer

(pg. 50) or computer (pg. 55), while recording

or viewing a movie or when a slide show is in

progress (pg. 74).

SET

CANCEL

g LCD BRIGHTNESS

Adjust the LCD brightness.

Press the selector up or down to

adjust the brightness, then press

MENU/OK.

LCD BRIGHTNESS

SET

CANCEL

Tip: Turning the camera on again

To turn the camera on and shoot, open the lens cover

fully. To turn the camera on and view images, press

D (pg. 13).

Download from Www.Somanuals.com. All Manuals Search And Download.

The Setup Menu

c DIGITAL ZOOM

If ON is selected, pressing T at the maximum

optical zoom position will trigger digital zoom,

further magnifying the image. To cancel digital

zoom, zoom out to the minimum digital zoom

position and press W.

Zoom

indicator

Zoom indicator,

DIGITAL ZOOM oﬀ

DIGITAL ZOOM on

Optical zoom

Optical zoom Digital

zoom

Caution

Digital zoom produces lower quality images than

optical zoom.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

The camera supports a wide range of accessories from FUJIFILM and other manufacturers.

■Audio/Visual

■Computer Related

DIGITAL CAMERA

Audio/visual

output

FINEPIX Z70 series

USB

Computer (available from

third-party suppliers)

TV (available from

third-party suppliers)

Connect the HD player and TV

using an HDMI cable (available

from third-party suppliers)

SD card slot or card reader

SD/SDHC

memory card

■Printing

HD player

High-deﬁnition TV

(available from

third-party suppliers)

USB

PictBridge-compatible

printer (available from

third-party suppliers)

Printer

(available from third-party suppliers)

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

Accessories from Fujiﬁlm

The following optional accessories were available from FUJIFILM. Check with your local Fujiﬁlm

representative for information on the accessories available in your region.

• NP-45 rechargeable Li-ion battery: Additional NP-45 slimline batteries can be purchased

as required.

• AV-C1 A/V cable: Connects the camera and a TV.

• HDP-L1 HD Player: Connects to an HD television and allows you to view still images and

movies stored on the memory card. Also requires the purchase of an HDMI cable.

For the latest information on accessories available from FUJIFILM, visit http://www.fujifilm.com/

products/digital_cameras/index.html.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Power and Battery

Problem

The camera

does not turn

on.

Possiible cause

The battery is exhausted.

Soluution

Charge the battery or insert a fully-charged

spare battery.

Page

4, 6

The battery is not in the correct orientation. Re-insert the battery in the correct orientation.

Warm the battery by placing it in a pocket

The battery is cold.

or other warm place and re-insert it in the

camera immediately before taking a picture.

Clean the terminals with a soft, dry cloth.

Use kmode if you want to conserve power

when shooting.

The battery

runs down

quickly.

Power

supply

There is dirt on the battery terminals.

—

The camera is in Gmode.

The battery has reached the end of its

charging life. Purchase a new battery.

The battery has been charged many times.

The battery is exhausted.

—

The camera

turns oﬀ

suddenly.

Charge the battery or insert a fully-charged

spare battery.

4, 6

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Problem

Possible cause

Soluution

Page

The battery is not correctly inserted.

The battery is not in the correct orientation. Re-insert the battery in the correct orientation.

Charging is slow. The temperature is low.

Re-insert the battery in the charger.

Charging does

not start.

Charge the battery at room temperature.

Clean the terminals with a soft, dry cloth.

The battery has reached the end of its

charging life. Purchase a new battery. If

the battery still fails to charge, contact your

FUJIFILM dealer.

Battery

charger

There is dirt on the battery terminals.

—

The charging

lamp lights, but

the battery does

not charge.

The battery has been charged many times.

—

Menus and Displays

Problem

Menus and displays are

not in English.

Possible cause

English is not selected for the w

option in the setup menu.

Soluution

Page

Select ENGLISH.

Shooting

Problem

Possible cause

Memory is full.

Memory is not formatted.

There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth.

The memory card is damaged.

Soluution

Page

Insert a new memory card or delete pictures. 8, 43

Format the memory card or internal memory. 87

No picture is

taken when

the shutter

Insert a new memory card.

Charge the battery or insert a fully-charged

spare battery.

button is

pressed.

Taking

pictures

The battery is exhausted.

4, 6

The camera has turned oﬀ automatically. Turn the camera on.

13, 89

The monitor

goes dark after The ﬂash has ﬁred.

shooting.

The monitor may darken while the ﬂash

charges. Wait for the ﬂash to charge.

The subject is close to the camera.

The subject is far away from the camera.

The subject is not suited to autofocus.

Select macro mode.

Cancel macro mode.

Use focus lock.

The camera

does not focus.

Focus

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Problem

Possible cause

Soluution

Page

Macro mode is The camera is in a shooting mode which

not available. makes macro (close-up) mode unavailable.

Face detection The camera is in a shooting mode which

not available. makes Intelligent Face Detection unavailable.

The subject’s face is obscured sunglasses, a

Close-ups

Choose a diﬀerent shooting mode.

Remove the obstructions.

hat, long hair, or other objects.

Change the composition so that the

subject’s face occupies a larger area of the

frame.

The subject’s face occupies only a small

area of the frame.

Intelligent No face is

Face

detected.

Detection

The subject’s head is tilted or horizontal.

The camera is tilted.

Ask the subject to hold their head straight.

Hold the camera straight.

The subject’s face is poorly lit.

Shoot in bright light.

—

Recompose the picture or turn face

detection oﬀ and frame the picture using

focus lock.

Wrong subject The selected subject is closer to the center

27, 30

selected.

of the frame than the main subject.

The camera is in a shooting mode in which

the ﬂash does not ﬁre.

Choose a diﬀerent shooting mode.

Charge the battery or insert a fully-charged

spare battery.

Select OFF for E CONTINUOUS.

Turn silent mode oﬀ.

The battery is exhausted.

4, 6

The ﬂash does

not ﬁre.

The camera is in continuous mode.

The camera is in silent mode.

The ﬂash is oﬀ (W).

Flash

Choose a diﬀerent ﬂash mode.

The camera is in a shooting mode which

makes some ﬂash modes unavailable.

The camera is in silent mode.

Some ﬂash

modes are not

available.

Choose a diﬀerent shooting mode.

Turn silent mode oﬀ.

The ﬂash does The subject is not in range of the ﬂash.

Position the subject in range of the ﬂash.

107

not fully light

The ﬂash window is obstructed.

the subject.

Hold the camera correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Problem

Can not take

pictures.

Can not record

movies.

Possible cause

The battery is low.

Soluution

Page

Charge the battery or insert a fully-charged

spare battery.

4, 6

N mode

Movies

Choose a diﬀerent shooting mode.

The camera is in N mode.

The lens is dirty.

The lens is blocked.

Clean the lens.

Keep objects away from the lens.

110

Pictures are

blurred.

Ris displayed during shooting and the

focus frame is displayed in red.

0is displayed during shooting.

19, 30,

100

Check focus before shooting.

Use the ﬂash or a tripod.

Pictures are

mottled.

The ambient temperature is high and the This is normal and does not indicate a

Problem

images

subject is poorly lit.

malfunction. Choose a lower sensitivity.

White or purple vertical lines may appear

when a very bright object is framed in the

display. This is normal and does not indicate

a malfunction. Smear is not recorded in

photographs but may appear in movies. If

possible, avoid shooting movies with bright

objects in or close to the frame.

Smear appears The sun or another bright object was in

in pictures. the frame.

104

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Playback

Problem

Possible cause

Soluution

Page

Pictures are

grainy.

The pictures were taken with a diﬀerent

make or model of camera.

—

The pictures were taken in N modes, at

an image size of p, saved as vBlog

Images, or with a diﬀerent make or model

of camera.

Pictures

Playback zoom

unavailable.

—

No sound in

voice memo

and movie

playback.

Playback volume is too low.

The microphone was obstructed.

The speaker is obstructed.

Adjust playback volume.

Hold the camera correctly during recording. 45, 80

Audio

Hold the camera correctly during playback.

48, 81

Selected

Some of the pictures selected for deletion Remove protection using the device with

Deletion pictures are

not deleted.

File

are protected.

which it was originally applied.

Turn the camera oﬀ before opening the

battery-chamber cover to replace the battery 88

or insert a memory card.

numbering is The battery-chamber cover was opened

unexpectedly while the camera was on.

reset.

Frame no.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Connections

Problem

Possiblle cause

Soluution

Page

Nothing

Nothing is displayed on the camera

monitor while the camera is connected

to a TV.

displayed

on camera

monitor.

Camera is connected to TV.

The camera is not properly connected.

Connect the camera correctly.

48, 49

—

The supplied A/V cable was connected

during movie playback.

Connect the camera once movie playback

has ended.

No picture or

sound.

Input on the television is set to “TV”.

Set input to “VIDEO”.

The camera is not set to the correct video

standard.

Match the camera r VIDEO SYSTEM

setting to the TV.

48, 83

—

The volume on the television is too low.

Adjust the volume.

The camera is not set to the correct video

standard.

Match the camera r VIDEO SYSTEM

setting to the TV.

No color.

48, 83

The computer

does not

recognize the

camera.

Pictures can

not be printed.

Only one copy

is printed.

The date is not

printed.

Computer

PictBridge

The camera is not properly connected.

Connect the camera correctly.

The camera is not properly connected.

The printer is oﬀ.

Connect the camera correctly.

Turn the printer on.

—

The printer is not PictBridge-compatible.

—

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Miscellaneous

Problem

Possiblle cause

Soluution

Page

Temporary camera malfunction.

Remove and reinsert the battery.

Charge the battery or insert a fully-charged

spare battery.

Nothing happens when

the shutter button is

pressed.

The battery is exhausted.

4, 6

Remove and reinsert the battery. If the

problem persists, contact your FUJIFILM

dealer.

The camera does not

function as expected.

Temporary camera malfunction.

The camera accidentally The memory card has been inserted or

Insert the memory card, close the battery-

chamber cover, and then turn on the camera.

Turn silent mode oﬀ.

turns oﬀ.

pulled out.

No sound.

The camera is in silent mode.

The battery charger can be used with voltages

of 100–240 V. Consult your travel agent for

information on plug adapters.

I want to charge the

battery while overseas.

Check the label on the battery charger.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning Messages and Displays

The following warnings are displayed in the monitor:

Warning

O(red)

N(blinks red)

Description

Low battery.

Battery exhausted.

Slow shutter speed. Picture may be blurred. Use the ﬂash or mount the camera on a tripod.

• Use focus lock to focus on another subject at the

same distance, then recompose the picture (pg.

30).

Soluution

Charge the battery or insert a fully-charged spare

battery.

(displayed in red with The camera can not focus.

red focus frame)

• If the subject is poorly lit, try focusing at a distance

of about 2m (6ft. 7in.).

• Use macro mode to focus when taking close-ups.

Aperture or shutter

speed displayed in red picture will be over- or under-exposed.

The subject is too bright or too dark. The

If the subject is dark, use the ﬂash.

PRESS THE SHUTTER BUTTON

TO GO BACK TO SHOOTING MODE

To exit to shooting mode, press the shutter button.

Close the lens cover to turn the camera oﬀ.

Dbutton pressed while lens cover is open.

CLOSE THE LENS COVER

TO TURN OFF THE CAMERA

FOCUS ERROR

Turn the camera oﬀ and then on again, taking care

not to touch the lens. If the message persists, contact

a FUJIFILM dealer.

Camera malfunction.

TURN OFF THE CAMERA

AND TURN ON AGAIN

No memory card inserted when COPY is

selected in the playback menu.

NO CARD

Insert a memory card.

The memory card or internal memory is not Format the memory card or internal memory (pg.

formatted.

87).

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg.

87). If the message persists, replace the memory card.

Contact a FUJIFILM dealer.

CARD NOT INITIALIZED

The memory card contacts require

cleaning.

Camera malfunction.

100

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning Messages and Displays

Warning

Description

The memory card is not formatted for use

in the camera.

Soluution

Format the memory card (pg. 87).

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg.

87). If the message persists, replace the memory card.

Contact a FUJIFILM dealer.

CARD ERROR

The memory card contacts require cleaning

or the memory card is damaged.

Camera malfunction.

dMEMORY FULL

x MEMORY FULL

INTERNAL MEMORY IS FULL

INSERT A NEW CARD

The memory card or internal memory is full; Delete pictures or insert a memory card with more

pictures can not be recorded or copied.

free space.

Re-insert the memory card or turn the camera oﬀ

and then on again. If the message persists, contact a

FUJIFILM dealer.

Memory card error or connection error.

WRITE ERROR

Not enough memory remaining to record Delete pictures or insert a memory card with more

additional pictures. free space.

The memory card or internal memory is not Format the memory card or internal memory (pg.

formatted.

87).

PROTECTED CARD

BUSY

The memory card is locked.

The memory card is incorrectly formatted. Use the camera to format the memory card (pg. 87).

Unlock the memory card (pg. 8).

Format the memory card (pg. 87) and select RENEW

for the b FRAME NO. option in the setup menu.

The camera has run out of frame numbers

FRAME NO. FULL

Take a picture to reset frame numbering to 100-0001,

(current frame number is 999-9999).

then return to the b FRAME NO. menu and select

CONT.

101

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning Messages and Displays

Warning

Description

The ﬁle is corrupt or was not created with

the camera.

Soluution

The ﬁle can not be played back.

Clean the contacts with a soft, dry cloth. If the

message is repeated, format the memory card (pg.

87). If the message persists, replace the memory

card.

READ ERROR

The memory card contacts require

cleaning.

Camera malfunction.

Contact a FUJIFILM dealer.

An attempt was made to delete, rotate, or Remove protection before deleting, rotating, or

add a voice memo to a protected picture. adding voice memos to pictures.

PROTECTED FRAME

Voice memo ﬁle is corrupt.

Camera malfunction.

The voice memo can not be played back.

Contact a FUJIFILM dealer.

hERROR

dNO IMAGE

x NO IMAGE

The source device selected in the playback

COPY menu contains no pictures.

Select a diﬀerent source.

pCAN NOT CROP

An attempt was made to crop a ppicture.

The picture selected for cropping is damaged

or was not created with the camera.

An attempt was made to crop a blog image.

CAN NOT CROP

vCAN NOT CROP

DPOF FILE ERROR

These pictures can not be cropped.

The DPOF print order on the current memory Copy the pictures to internal memory and create a

card contains more than 999 images.

The picture can not be printed using DPOF.

Movies can not be printed using DPOF.

The picture can not be rotated.

new print order.

CAN NOT SET DPOF

ACAN NOT SET DPOF

CAN NOT ROTATE

ACAN NOT ROTATE

ACAN NOT EXECUTE

eCAN NOT EXECUTE

CAN NOT EXECUTE

—

Movies can not be rotated.

EDIT FOR BLOG and RED EYE REMOVAL

can not be used with movies, pictures

created with other devices, pictures that can

not be viewed, or pictures created using

EDIT FOR BLOG.

—

vCAN NOT EXECUTE

102

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning Messages and Displays

Warning

Description

Soluution

Charge the battery or insert a fully-charged spare

battery.

The shutter button was pressed in N mode

when the battery was low.

N CAN NOT EXECUTE

The successive movie ﬁle has been

overwritten or renamed by computer or

other make of camera.

Clips can not be added to ﬁles that have been

overwritten or renamed by a computer or other

make of camera.

R CAN NOT EXECUTE

PRESS AND HOLD

THE DISP BUTTON TO

DEACTIVATE SILENT MODE camera in silent mode.

An attempt was made to choose a ﬂash

mode or adjust the volume with the

Exit silent mode before choosing a ﬂash mode or

adjusting the volume.

A connection error occurred while pictures Conﬁrm that the device is turned on. If the device

were being printed or copied to a computer is connected via USB, check that the cable is

COMMUNICATION ERROR

PRINTER ERROR

or other device.

connected.

Check printer (see printer manual for details). To

resume printing, turn the printer oﬀ and then turn it

back on.

Check printer (see printer manual for details). If printing

does not resume automatically, press MENU/OK to

resume.

Printer out of paper or ink, or other printer

error.

PRINTER ERROR

RESUME?

Movies and some pictures created with other devices

can not be printed. If the picture was created with

the camera, check the printer manual to conﬁrm

that the printer supports the JFIF-JPEG or Exif-JPEG

format. If it does not, the pictures can not be printed.

An attempt was made to print a movie, a

picture not created with the camera, or a

picture in a format not supported by the

printer.

CAN NOT BE PRINTED

103

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details

visible using optical zoom are simply enlarged, producing a slightly “grainy” image.

DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders”

stored in internal memory or on a memory card. The information in the order includes the pictures to

be printed and the number of copies of each picture.

EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount

of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV

increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering

the camera can be controlled by adjusting aperture and shutter speed.

Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction

during printing.

JPEG (Joint Photographic Experts Group): A compressed ﬁle format for color images. The higher the compression

rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.

Smear: A phenomenon speciﬁc to CCDs which causes white streaks to appear when very bright light sources,

such as the sun or reﬂected sunlight, appear in the frame.

WAV (Waveform Audio Format): A standard Windows audio ﬁle format. WAV ﬁles have the extension “*.WAV” and

may be compressed or uncompressed. The camera uses uncompressed WAV. WAV ﬁles can be played using

Windows Media Player or QuickTime 3.0 or later.

White balance: The human brain automatically adapts to changes in the color of light, with the result that objects

that appear white under one light source still appear white when the color of the light source changes. Digital

cameras can mimic this adjustment by processing images according to the color of the light source. This

process is known as “white balance.”

104

Download from Www.Somanuals.com. All Manuals Search And Download.

Internal Memory/Memory Card Capacity

The following table shows the recording time or number of pictures available at diﬀerent image qualities. All

ﬁgures are approximate; ﬁle size varies with the scene recorded, producing wide variations in the number of ﬁles

that can be stored. The number of exposures or length remaining may not diminish at an even rate.

T Image Quality (still images)

d Movie Quality

m p )1280 t s

Image Sizze

3:2

16:9

n m16:9

Inteerrnnaall mmeemory

(approx.. 13 MB)

2sec.

10sec. 20sec.

1 GB

2 GB

4 GB

8 GB

160

310

650

1,270

2,560

180

360

750

1,480

2,990

220

430

880

1,730

3,520

320

620

1,310

2,550

5,120

590

1,170

2,430

4,750

890

1,720

3,540

6,920

960

1,830

3,250

6min. 10min. 30min.

6,020 10min. 20min. 50min.

3,770 12,410 20min.* 50min.* 120min.*

7,510 24,210 40 min.* 110min.* 240 min.*

16 GB

9,570 13,850 15,080 48,650 90min.* 230min.* 480min.*

* A movie recording will stop automatically when a movie ﬁle becomes approx. 2GB or 15 min. If you want to continue

recording, press the shutter button again. The available recording time is displayed based on approx. 2GB.

105

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

System

Model

FinePix Z70 series digital camera

Eﬀective pixels

CCD

12.0 million

½.33 -in., square-pixel CCD with primary color ﬁlter

Storage media

• Internal memory (approx. 13MB)

• SD/SDHC memory cards (see page 8)

File system

Compliant with Design Rule for Camera File System (DCF), Exif 2.2, and Digital Print Order Format

(DPOF)

File format

• Still pictures: Exif 2.2 JPEG (compressed)

• Audio: Monaural WAV

• Movies: Motion JPEG AVI

Image size (pixels)

• r3:2: 3,984×2,656

• y: 4,000×3,000

• g16:9 : 4,000×2,248 • 0: 2,816×2,112

• n: 2,048×1,536

• m16:9 : 1,920×1,080 • m: 1,600×1,200

• p: 640×480

Lens

Focal length

Digital zoom

Aperture

Fujinon 5× optical zoom lens, f/4.0 (wide angle)–4.8 (telephoto)

F=6.4 mm–32.0 mm (35-mm format equivalent: 36 mm–180 mm)

Still images: approx. 6.3× (up to 31.5× when combined with optical zoom)

[Wide angle] F4.0 to F6.7 (two steps) / [Telephoto] F4.8 to F8.0 (two steps)

Focus range (distance

from front of lens)

Sensitivity

Approx. 60cm (2ft.)–inﬁnity (wide angle) / Approx. 1.0m (3.2ft.)–inﬁnity (telephoto)

Macro mode: approx. 9cm–80cm/3.5in.–2ft. 7in. (wide angle); 1m–3m/3.2ft.–9ft. 11in. (telephoto)

Equivalent to ISO 100, 200, 400, 800, 1600; AUTO (Standard Output Sensitivity)

256-segment through-the-lens (TTL) metering using CCD image sensor

Programmed autoexposure

Metering

Exposure control

Exposure compensation

Scene modes

–2EV–+2EV in increments of ^{1 3}EV (P and N modes)

G (SCENE RECOGNITION), k (AUTO), P (PROGRAM AE), A (NATURAL & K (Dual Shot Mode)),

B (NATURAL LIGHT), C (PORTRAIT), V (PORTRAIT ENHANCER), K (LANDSCAPE), L (SPORT),

D (NIGHT), U (NIGHT (TRIPOD)), E (SUNSET), F (SNOW), G (BEACH), I (PARTY), O (FLOWER),

P (TEXT), N (AUCTION MODE), R (SUCCESSIVE MOVIE)

Image Stabilization

Available

Intelligent Face Detection Available

106

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

System

Shutter speed

Continuous

Focus

4s– ^2,000s; combined mechanical and electronic shutter

• TOP 3: Up to 1fps; max. 3 frames

• Mode: Single AF

• Autofocus system: Contrast-detect TTL AF

• Focus-area selection: AF CENTER and TRACKING

White balance

Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight ﬂuorescent,

warm white ﬂuorescent, cool white ﬂuorescent, and incandescent lighting

Couple timer/Group timer/Approx. 2 sec./10 sec.

Auto ﬂash; eﬀective range when sensitivity is set to AUTO is approx. 70cm–3.1m/2ft. 4in.–10ft. 1in.

(wide angle), 70cm–2.7m/2ft. 4in.–8ft. 9in. (telephoto), or 30cm–80cm/1ft.–2ft. 7in. (macro mode)

Auto, ﬁll ﬂash, oﬀ, slow sync (red-eye removal oﬀ); auto with red-eye removal, ﬁll ﬂash with red-eye

removal, oﬀ, slow sync with red-eye removal (red-eye removal on)

Self-timer

Flash

Flash modes

Monitor

Movies

2.7-in., 230k-dot color LCD monitor; frame coverage approx. 96%

Camera can record movies with monaural sound and a frame size of 1280×720, 640×480 or

320×240 at a frame rate of 30fps

Shooting options

Playback options

Scene recognition, Intelligent Face Detection with red-eye removal, high-speed shooting, best

framing, and frame number memory

Intelligent Face Detection, red-eye removal, micro thumbnail, edit for blog , movie edit, crop (still

pictures), resize, slide show, transition, multi-frame playback, image rotation, voice memo, and image

Other options

PictBridge, Exif Print, FinePix COLOR, language selection (Arabic, Simplified Chinese, Traditional

Chinese, Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian, Italian, Japanese,

Korean, Lithuanian, Norwegian, Persian, Polish, Portuguese, Russian, Slovak, Spanish, Swedish, Thai,

Turkish and Ukrainian), time difference, silent mode

Input/output terminals

A/V OUT (audio/video output) NTSC or PAL with monaural sound

Digital input/output USB 2.0 High Speed with MTP/PTP connection

107

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Power supply/other

Power sources

NP-45A rechargeable battery

Battery life (NP-45A)

Approx. 165 frames, based on CIPA standard. Based on included battery, measured when using SD

memory card. Note that the number of shots that can be taken cannot be guaranteed and will be

reduced in lower temperatures.

Camera dimensions

91.0mm×57.1mm×20.1mm/3.5in. ×2.2in. ×0.7in.,excluding projecting parts, measured at the

thinnest part

Camera weight

Shooting weight

Operating conditions

Approx. 128g/4.5oz., excluding battery, accessories, and memory cards

Approx. 145g/5.1oz., including battery and memory card

• Temperature: 0°C–+40°C/32°F–+104°F

• Humidity: 10%–85% (no condensation)

NP-45A rechargeable battery

BC-45B battery charger

Nominal voltage

Nominal capacity

Dimensions (W × H × D)

DC 3.7V

720mAh

31.0mm×39.6mm×6.0mm/

1.2in. ×1.6in. ×0.2in.

Approx. 15g/1.0oz.

Rated input

Input capacity

Rated output

Supported batteries

Charging time

100–240V AC, 50/60Hz

6VA(100V/240V)

4.2V DC, 550mA

NP-45 rechargeable battery

Approx. 110+/–20%minutes

(measured at +25°C(+77°F))

Weight

Dimensions (W × H × D)

91mm×46mm×23mm/

3.6in. ×1.8in. ×0.9in., excluding

projections

Weight

Operating temperature

Approx. 65g/2.2oz., excluding battery

0°C–+42°C/+32°F–+107°F

* The weight and dimensions vary depending on the country

or region of sale.

108

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Notes on the Battery and Battery Charger

• The battery and charger may become warm to the touch during charging. This is normal and does not

indicate a malfunction. If possible, charge the battery in a well-ventilated location.

• The battery charger may vibrate when in use. This is normal and does not indicate a malfunction.

• If the charger causes radio interference, increase the distance between the charger and the radio receiver.

• Do not leave the charger in locations that are very dusty or exposed to strong vibration, extreme humidity, or

high temperatures (for example, in direct sunlight or next to a heater).

• The battery charger can be used with input voltages of 100–240V AC and 50 or 60Hz. The shape of the

plug varies with the country of sale; consult your travel agent to determine whether the charger can be used

abroad.

Color Television Systems

NTSC (National Television System Committee) is a color television telecasting speciﬁcation adopted mainly in

the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in

European countries and China.

Notices

• Speciﬁcations subject to change without notice. FUJIFILM shall not be held liable for damages resulting from

errors in this manual.

• Although the monitor is manufactured using advanced high-precision technology, small bright points and

anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and

does not indicate a malfunction; images recorded with the camera are unaﬀected.

• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric ﬁelds, static

electricity, or line noise).

• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.

109

Download from Www.Somanuals.com. All Manuals Search And Download.

Caring for the Camera

To ensure continued enjoyment of the product, observe the following precautions.

Storage and Use

■Condensation

If the camera will not be used for an extended

period, remove the battery and memory card.

Do not store or use the camera in locations that

are:

• exposed to rain, steam, or smoke

• very humid or extremely dusty

• exposed to direct sunlight or very high

temperatures, such as in a closed vehicle on a

sunny day

Sudden increases in temperature, such as occur

when entering a heated building on a cold day,

can cause condensation inside the camera. If

this occurs, turn the camera oﬀ and wait an hour

before turning it on again. If condensation forms

on the memory card, remove the card and wait

for the condensation to dissipate.

Cleaning

Use a blower to remove dust from the lens and

monitor, then gently wipe with a soft, dry cloth.

Any remaining stains can be removed by wiping

gently with a piece of FUJIFILM lens-cleaning

paper to which a small amount of lens-cleaning

ﬂuid has been applied. Care should be taken to

avoid scratching the lens or monitor. The camera

body can be cleaned with a soft, dry cloth.

Do not use alcohol, thinner, or other volatile

chemicals.

• extremely cold

• subject to strong vibration

• exposed to strong magnetic ﬁelds, such as

near a broadcasting antenna, power line, radar

emitter, motor, transformer, or magnet

• in contact with volatile chemicals such as

pesticides

• next to rubber or vinyl products

Travelling

Keep the camera in your carry-on baggage.

Checked baggage may suﬀer violent shocks that

could damage the camera.

110

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes and Cautions

IMPORTANT SAFETY INSTRUCTIONS

and operating instructions should the safety purpose of the polarized been adhered to.

•

Read Instructions: All the safety

your obsolete outlet. Do not defeat manufacturer’s instructions have

of the appliance should follow the

manufacturer’s instructions, and

should use a mounting accessory

be read before the appliance is

operated.

plug.

This video product should never

be placed near or over a radiator or recommended by the manufacturer.

heat register.

Alternate Warnings: This video

product is equipped with a 3-wire

•

Retain Instructions: The safety and

operating instructions should be

retained for future reference.

Heed Warnings: All warnings on the

appliance and in the operating

instructions should be adhered to.

Follow Instructions: All operating

and use instructions should be

followed.

An appliance and

cart combination

grounding-type plug, a plug having Attachments: Do not use

a third (grounding) pin. This plug

will only fit into a grounding-type

attachments not recommended by should be moved

the video product manufacturer as with care. Quick

power outlet. This is a safety feature. they may cause hazards.

If you are unable to insert the

stops, excessive

force, and uneven

surfaces may

cause the appliance and cart

combination to overturn.

Water and Moisture: Do not use this

plug into the outlet, contact your

electrician to replace your obsolete

outlet. Do not defeat the safety

purpose of the grounding-type

plug.

video product near water – for

example, near a bath tub, wash

bowl, kitchen sink, or laundry

tub, in a wet basement, or near a

swimming pool, and the like.

Installation

Anteennnas

Power Sources: This video product

should be operated only from the

type of power source indicated on

the marking label. If you are not sure

of the type of power supply to your

home, consult your appliance dealer

or local power company. For video

products intended to operate from

battery power, or other sources,

refer to the operating instructions.

Outdoor Antenna Grounding: If an

outside antenna or cable system is

connected to the video product, be

sure the antenna or cable system

is grounded so as to provide some

protection against voltage surges and

built-up static charges. Section 810

of the National Electrical Code, ANSI/

NFPA No. 70, provides information

with respect to proper grounding of

the mast and supporting structure,

grounding of the lead-in wire to

an antennadischarge unit, size of

grounding conductors, location of

antenna-discharge unit, connection

to grounding electrodes, and

requirements for the grounding

electrode.

Overloading: Do not overload wall

outlets and extension cords as this

can result in a risk of fire or electric

shock.

Power-Cord Protection: Power-Supply

cords should be routed so that

they are not likely to be walked

on or pinched by items placed

upon or against them, paying

particular attention to cords at

plugs, convenience receptacles, and

the point where they exit from the

appliance.

Ventilation: Slots and openings

in the cabinet are provided for

ventilation and to ensure reliable

operation of the video product

and to protect it from overheating,

and these openings must not be

blocked or covered.

The openings should never be

blocked by placing the video

product on a bed, sofa, rug, or other

similar surface.

Grounding or Polarization: This

Accessories: Do not place this video

product on an unstable cart, stand,

tripod, bracket, or table. The video

product may fall, causing serious

injury to a child or adult, and

serious damage to the appliance.

Use only with a cart, stand, tripod,

bracket, or table recommended

by the manufacturer, or sold with

the video product. Any mounting

video product is equipped with a

polarized alternating-current line

plug (a plug having one blade

wider than the other). This plug will

fit into the power outlet only one

way. This is a safety feature. If you

are unable to insert the plug fully

into the outlet, try reversing the

plug. If the plug should still fail to fit,

contact your electrician to replace

This video product should not

be placed in a built-in installation

such as a bookcase or rack unless

proper ventilation is provided or the

111

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes and Cautions

Power Lines: An outside antenna

system should not be located in the video product.

vicinity of overhead power lines or

Never spill liquid of any kind on the those controls that are covered

by the operating instructions as

an improper adjustment of other

controls may result in damage and

will often require extensive work

by a qualified technician to restore

the video product to its normal

operation.

When the video product exhibits

a distinct change in performance

- this indicates a need for service.

Lightning: For added protection for

other electric light or power circuits,

or where it can fall into such power

lines or circuits. When installing an

outside antenna system, extreme

care should be taken to keep from

touching such power lines or

circuits as contact with them might

be fatal.

this video product receiver during

a lightning storm, or when it is left

unattended and unused for long

periods of time, unplug it from

the wall outlet and disconnect

the antenna or cable system. This

will prevent damage to the video

product due to lightning and

power-line surges.

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE

Replacement Parts: When

replacement parts are required, be

sure the service technician has used

replacement parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may

result in fire, electric shock or other

hazards.

Service

Ground

Clamp

Antenna Lead

in Wire

Servicing: Do not attempt to service

this video product yourself as

opening or removing covers may

expose you to dangerous voltage or

other hazards. Refer all servicing to

qualified service personnel.

Antenna

Electric

Service

Equipment

Discharge Unit

(NEC SECTION

810-20)

Grounding

Conductors

(NEC SECTION

810-21)

Ground

Clamps

Power Service Grounding

Electrode System

(NEC ART 250. PART H)

Damage Requiring Service: Unplug this

video product from the wall outlet

and refer servicing to qualified

service personnel under the

following conditions:

Safety Check: Upon completion of

any service or repairs to this video

product, ask the service technician

to perform safety checks to

determine that the video product is

in proper operating condition.

When the power-supply cord or

plug is damaged.

Use

Cleaning: Unplug this video product

from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for

cleaning.

If liquid has been spilled, or objects

have fallen into the video product.

If the video product has been

exposed to rain or water.

If the video product has been

dropped or the cabinet has been

damaged.

If the video product does not

operate normally be following the

operating instructions. Adjust only

Object and Liquid Entry: Never push

objects of any kind into this video

product through openings as they

may touch dangerous voltage

points or shortout parts that could

result in a fire or electric shock.

112

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes and Cautions

Be sure to read this notes before using

Safety Notes

• Make sure that you use your camera correctly. Read these Safety Notes

and your Owner’s Manual carefully before use.

WARNING

If a problem arises, turn the camera off, remove the battery, disconnect and unplug

the AC power adapter.

Continued use of the camera when it is emitting smoke, is emitting any

unusual odor, or is in any other abnormal state can cause a fire or electric

shock.

Unplug

from power

socket

• After reading these Safety Notes, store them in a safe place.

• Contact your FUJIFILM dealer.

About the Icons

Do not allow water or foreign objects to enter the camera.

• The icons shown below are used in this document to indicate the

severity of the injury or damage that can result if the information

indicated by the icon is ignored and the product is used incorrectly as a

result.

If water or foreign objects get inside the camera, turn the camera off, remove

the battery and disconnect and unplug the AC power adapter.

Continued use of the camera can cause a fire or electric shock.

• Contact your FUJIFILM dealer.

Do not use the camera in the bathroom or shower.

This can cause a fire or electric shock.

This icon indicates that death or serious injury can result if the information

is ignored.

Do not use in

the bathroom

or shower

WARNING

Never attempt to change or take apart the camera. (Never open the casing.) Do not use

the camera when it has been dropped or the casing is damaged.

This can cause a fire or electric shock.

This icon indicates that personal injury or material damage can result if the

information is ignored.

CAUTION

Do not

disassemble

• Contact your FUJIFILM dealer.

The icons shown below are used to indicate the nature of the information

which is to be observed.

Do not change, heat or unduly twist or pull the connection cord and do not place heavy

objects on the connection cord.

These actions could damage the cord and cause a fire or electric shock.

• If the cord is damaged, contact your FUJIFILM dealer.

Triangular icons tell you that this information requires attention (“important”).

Do not place the camera on an unstable surface.

This can cause the camera to fall or tip over and cause injury.

Circular icons with a diagonal bar tell you that the action indicated is

prohibited (“Prohibited ).

Never attempt to take pictures while in motion.

Do not use the camera while you are walking or driving a vehicle. This can

result in you falling down or being involved in a traffic accident.

Filled circles with an exclamation mark tell you an action that must be

performed (“Required”).

Do not touch any metal parts of the camera during a thunderstorm.

This can cause an electric shock due to induced current from the lightning

discharge.

Do not use the battery except as specified.

Load the battery as aligned with the indicator.

113

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes and Cautions

WARNING

CAUTION

Do not heat, change or take apart the battery. Do not drop or subject the battery to

impacts. Do not store the battery with metallic products. Do not use chargers other

than the specified model to charge the battery.

Keep out of the reach of small children.

This product could cause injury in the hands of a child.

Any of these actions can cause the battery to burst or leak and cause fire or

injury as a result.

Do not place heavy objects on the camera.

This can cause the heavy object to tip over or fall and cause injury.

Use only the battery or AC power adapters specified for use with this camera. Do not

use voltages other than the power supply voltage shown.

The use of other power sources can cause a fire.

Do not move the camera while the AC power adapter is still connected. Do not pull on

the connection cord to disconnect the AC power adapter.

This can damage the power cord or cables and cause a fire or electric shock.

If the battery leaks and fluid gets in contact with your eyes, skin or clothing. Flush

the affected area with clean water and seek medical attention or call an emergency

number right away.

Do not use the AC power adapter when the plug is damaged or the plug socket

connection is loose.

This could cause a fire or electric shock.

Do not use the charger to charge batteries other than those specified here.

The Ni-MH battery charger is designed for Fujifilm HR-AA Ni-MH batteries.

Using the charger to charge conventional batteries or other types of

rechargeable batteries can cause the battery to leak fluid, overheat or burst.

Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.

This can cause heat to build up and distort the casing or cause a fire.

When you are cleaning the camera or you do not plan to use the camera for an extended

period, remove the battery and disconnect and unplug the AC power adapter.

Failure to do so can cause a fire or electric shock.

When carrying the battery, install it in a digital camera or keep it in the hard case.

When storing the battery, keep it in the hard case. When discarding, cover the battery

terminals with insulation tape.

Contact with other metallic objects or battery could cause the battery to

ignite or burst.

When charging ends, unplug the charger from the power socket.

Leaving the charger plugged into the power socket can cause a fire.

Using a flash too close to a person’s eyes may temporarily affect the eyesight.

Take particular care when photographing infants and young children.

Keep Memory Cards out of the reach of small children.

Because Memory Cards are small, they can be swallowed by children. Be sure

to store Memory Cards out of the reach of small children. If a child swallows a

Memory Card, seek medical attention or call an emergency number.

When an xD-Picture Card is removed, the card could come out of the slot too quickly.

Use your finger to hold it and gently release the card.

Request regular internal testing and cleaning for your camera.

Build-up of dust in your camera can cause a fire or electric shock.

• Contact your FUJIFILM dealer to request internal cleaning every 2 years.

• Please note this is not a free of charge service.

CAUTION

Do not use this camera in locations affected by oil fumes, steam, humidity or dust.

This can cause a fire or electric shock.

Do not leave this camera in places subject to extremely high temperatures.

Do not leave the camera in locations such as a sealed vehicle or in direct

sunlight. This can cause a fire.

114

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes and Cautions

take care not to place the battery

directly against the pad. The

camera may not operate if you

use a depleted battery in cold

conditions.

■ Battery Life

• Dispose of used battery promptly.

Power Supply and Battery

* Confirm your battery type before reading

the following descriptions.

At normal temperatures, the battery • Do not drop the battery or

can be used at least 300 times.

If the time for which the battery

otherwise subject it to strong

impacts.

The following explains proper use

of batteries and how to prolong

their life. Incorrect use of batteries

can cause shorter battery life, as

well as leakage, excessive heat, fire

or explosion.

provides power shortens markedly, • Do not expose the battery to

this indicates that the battery has

reached the end of its effective life

and should be replaced.

water.

■ Charging the Battery

• Always keep the battery terminals

clean.

• You can charge the battery using

the battery charger (included).

• The battery can be charged at

• Do not store batteries in hot

places. Also, if you use the battery

for a long period, the camera body

and the battery itself will become

warm. This is normal. Use the AC

power adapter if you are taking

pictures or viewing images for a

long period of time.

■ Notes on storage

ambient temperatures between • If a battery is stored for long

Camera uses the Rechargeable

Lithium-ion Battery

0°C and +40°C (+32°F and

+104°F). Refer to the OWNER’S

MANUAL for the time of

charging battery.

• You should charge the battery

at an ambient temperature

between +10°C and +35°C

(+50°F and +95°F). If you charge

the battery at a temperature

outside this range, charging

takes longer because the

performance of the battery is

impaired.

• You cannot charge the battery

at temperatures of 0°C (+32°F) or

below.

• The Rechargeable Lithium-ion

Battery does not need to be fully

discharged or exhausted flat

before being charged.

periods while charged, the

performance of the battery can

be impaired. If the battery will not

be used for some time, run the

battery out before storing it.

• If you do not intend to use the

camera for a long period of time,

remove the battery from the

camera.

• Store the battery in a cool place.

• The battery should be stored in

a dry location with an ambient

temperature between +15°C and

+25°C (+59°F and +77°F).

* When shipped, the battery is not

fully charged. Always charge the

battery before using it.

* When carrying the battery, install

it in a digital camera or keep it in

the soft case.

Camera uses AA-size alkaline

or Ni-MH (nickelmetal hydride)

rechargeable batteries

■ Battery Features

• The battery gradually loses its

charge even when not used. Use

a battery that has been charged

recently (in the last day or two) to

take pictures.

* For details on the batteries that

you can use, refer to the OWNER’S

MANUAL of your camera.

■ Cautions for Using Battey

• Do not heat the batteries or throw

them into a fire.

• Do not carry or store batteries

with metal objects such as

necklaces or hairpins.

• Do not expose the batteries to

water, and keep batteries from

getting wet or stored in moist

locations.

• Do not attempt to take apart or

change the batteries, including

battery casings.

• To maximize the life of the battery,

turn the camera off as quickly as

possible when it is not being used.

• The number of available frames

will be lower in cold locations or

at low temperatures. Take along

a spare fully charged battery. You

can also increase the amount of

power produced by putting the

battery in your pocket or another

warm place to heat it and then

loading it into the camera just

before you take a picture.

• Do not leave the battery in hot

or extremely cold places.

■ Handling the Battery

Cautions for Your Safety:

• Do not carry or store battery with

metal objects such as necklaces or

hairpins.

• Do not heat the battery or throw it

into a fire.

• Do not attempt to take apart or

change the battery.

• Do not recharge the battery with

chargers other those specified.

• The battery may feel warm after it

has been charged or immediately

after being used. This is perfectly

normal.

• Do not recharge a fully charged

battery.

• Do not subject the batteries to

strong impacts.

If you are using a heating pad,

115

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes and Cautions

• Do not use batteries that are

leaking, deformed, discolored.

• Do not store batteries in warm or

humid places.

• Keep the batteries out of reach of

babies and small children.

If any liquid at all leaks from

the batteries, wipe the battery

compartment thoroughly and

then load new batteries.

procedure for “Discharging

rechargeable batteries”.

used for a short time even after

repeated discharge-charge cycles,

it may have reached the end of its

service life.

CAUTION

Do not use the “Discharging

rechargeable batteries” function

when alkaline batteries being used.

• To charge Ni-MH batteries,

use the quick battery charger

(sold separately). Refer to the

instructions supplied with the

charger to make sure that the

charger is used correctly.

If any battery fluid comes

into contact with your hands

or clothing, flush the area

thoroughly with water. Note

that battery fluid can cause

loss of eyesight if it gets into

your eyes. If this occurs, do

not rub your eyes. Flush the

fluid out with clean water and

contact your physician for

treatment.

■ Disposing of Batteries

• When disposing of batteries, do

so in accordance with your local

waste disposal regulations.

• Make sure that the battery polarity

(Eand F) is correct.

• Do not use new with used

batteries. Do not use charged and

discharged batteries together.

• Do not use different types or

brands of batteries at the same

time.

• If you do not intend to use the

camera for a long period of time,

remove the batteries from the

camera. Note if the camera is left

with the batteries removed, the

time and date settings are cleared.

• The batteries feel warm right after

being used. Before removing the

batteries, turn the camera off

and wait for the batteries to cool

down.

• Since batteries do not work well in

cold weather or locations, warm

the batteries by placing them

inside your garments before use.

Batteries do not work well when

cold. They will work again when

the temperature returns to normal.

• Soil (such as fingerprints) on

the battery terminals makes the

batteries charge less reducing the

number of images. Carefully wipe

the battery terminals with a soft

dry cloth before loading.

Notes on both models (

)

■ AC Power Adapter

Always use the AC Power Adapter

with the camera. The use of an AC

Power adapter other than FUJIFILM

AC Power Adapter can be damaged

to your digital camera.

For details on the AC power adapter,

refer to the OWNER’S MANUAL of

your camera.

• Use the AC power adapter for

indoor use only.

• Do not use the battery charger to

charge other batteries.

• Note that the batteries feel warm

after being charged.

■ Using the AA-size Ni-MH batteries

correctly

• Due to the way the camera is

constructed, a small amount of

current is used even when the

camera is turned off. Note in

particular that leaving Ni-MH

batteries in the camera for a long

period will overdischarge the

batteries and may render them

unusable even after recharging.

• Ni-MH batteries will self-discharge

even when not used, and the time

for which they can be used may

be shortened as a result.

• Ni-MH batteries will deteriorate

rapidly if overdischarged (e.g.

by discharging the batteries in a

flashlight). Use the “Discharging

rechargeable batteries” function

provided in the camera to

• Ni-MH batteries left unused in

storage for long periods can

become “deactivated”. Also,

repeatedly charging Ni-MH

batteries that are only partially

discharged can cause them

to suffer from the “memory

effect”. Ni-MH batteries that

are “deactivated” or affected by

“memory” suffer from the problem

of only providing power for a

short time after being charged. To

prevent this problem, discharge

and recharge them several times

using the camera’s “Discharging

rechargeable batteries” function.

Deactivation and memory are

specific to Ni-MH batteries and are

not in fact battery faults.

• Plug the connection cord plug

securely into the DC input

terminal.

• Turn off the FUJIFILM Digital

camera before disconnecting the

cord from the DC input terminal.

To disconnect, pull out the plug

gently. Do not pull on the cord.

• Do not use the AC power adapter

with any device other than your

camera.

• During use, the AC power adapter

will become hot to the touch. This

is normal.

discharge the batteries.

• Ni-MH batteries have a limited

service life. If a battery can only be

See OWNER’S MANUAL for the

116

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes and Cautions

• Do not take apart the AC power

adapter. Doing so could be

dangerous.

purely for personal use. Users are

also asked to note that the transfer

of Memory Card containing images

• IBM PC/AT is a registered

trademark of International

Business Machines Corp. of the

U.S.A.

• Macintosh, Quick-Time, and Mac

OS are trademarks of Apple Inc. in

the U.S.A. and other countries.

■ Explanation of Color Television

System

NTSC: National Television System

Committee, color television

telecasting specifications

adopted mainly in the U.S.A.,

Canada and Japan.

• Do not use the AC power adapter or data protected under copyright

in a hot and humid place.

• Do not subject the AC power

adapter to strong shocks.

laws is only permissible within

the restrictions imposed by those

• The AC power adapter may emit a

humming. This is normal.

• If used near a radio, the AC power

adapter may cause static. If this

happens, move the camera away

from the radio.

• Windows 7, Windows Vista and the PAL: Phase Alternation by Line,

■ Handling Your Digital Camera

To ensure that images are recorded

correctly, do not subject the camera

to impact or shock while an image is

being recorded.

Windows logo are trademarks of

the Microsoft group of companies.

• IrSimple™ Trademark is owned by

the Infrared Data Association®.

• IrSS™ Trademark or IrSimpleShot™

Trademark is owned by the

Infrared Data Association®.

• SDHC logo is a trademark.

• HDMI logo is a trademark.

• YouTube is a trademark of Google

Inc.

a color television system

adopted mainly by European

countries and China.

■ Exif Print (Exif ver. 2.2)

Exif Print Format is a newly revised

digital camera file format that

contains a variety of shooting

information for optimal printing.

■ Liquid Crystal

Before Using the Camera

If the LCD monitor is damaged,

take particular care with the liquid

crystal in the monitor. If any of the

following situations arise, take the

urgent action indicated.

• If liquid crystal comes in contact

with your skin:

Wipe the area with a cloth and

then wash thoroughly with soap

and running water.

• If liquid crystal gets into your eye:

Flush the affected eye with clean

water for at least 15 minutes and

then seek medical assistance.

• If liquid crystal is swallowed:

Flush your mouth thoroughly with

water. Drink large quantities of

water and induce vomiting. Then

seek medical assistance.

■ Test Shots Prior to Photography

For important photographs (such

as weddings and overseas trips),

always take a test shot and view the

image to make sure that the camera

is working normally.

• FUJIFILM Corporation cannot

accept liability for any incidental

losses (such as the costs of

• Other company or product names

are trademarks or registered

trademarks of the respective

companies.

■ Notes on Electrical Interference

If the camera is to be used in

hospitals or aircrafts, please

note that this camera may cause

interference to other equipment in

the hospital or aircraft. For details,

please check with the applicable

regulations.

photography or the loss of income

from photography) incurred as a

result of faults with this product.

■ Notes on Copyright

Images recorded using your digital

camera system cannot be used in

ways that infringe copyright laws

without the consent of the owner,

unless intended only for personal

use. Note that some restrictions

apply to the photographing of

stage performances, entertainments

and exhibits, even when intended

■ Trademark Information

•

and xD-Picture Card™

are trademarks of FUJIFILM

Corporation.

117

Download from Www.Somanuals.com. All Manuals Search And Download.

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN

http://www.fujifilm.com/

Download from Www.Somanuals.com. All Manuals Search And Download.

Cooper Lighting Indoor Furnishings AR60T User Manual
Cooper Lighting Landscape Lighting Envoy User Manual
Craftsman Lawn Mower 917387205 User Manual
Craftsman Saw 113248510 User Manual
Creative Saw WS 6613 User Manual
Crown Boiler Boiler 16 325 500506 User Manual
Danby Refrigerator DPF074B1WDB User Manual
Everpure Water System EV9273 75 User Manual
Everpure Water System QCP10 TSGAC User Manual
Generac Portable Generator 04758 104759 104760 1 User Manual