WARRANTY
Our promise to you is quite simple. Fellowes shredders are built stronger, engineered to run longer, during the warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’
resist jams and power through large jobs. The Fellowes worry free warranty described below covers option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling,
the performance of the product, provides for prompt service and support, plus a lifetime cutter or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS
warranty.
FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY
PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for any consequential or incidental
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of defects damages attributable to this product. This warranty gives you specific legal rights. The duration, terms,
in material and workmanship and provides service and support for 3 years from the date of purchase and conditions of this warranty are valid worldwide, except where different limitations, restrictions,
by the original consumer. Fellowes warrants the cutting blades of the machine to be free from defects or conditions may be required by local law. For more details or to obtain service under this warranty,
in material and workmanship for the lifetime of the shredder. If any part is found to be defective please contact us or your dealer.
Help Line
Australia
Canada
Europe
00-800-1810-1810
+1-800-234-1185
+1-800-955-0959
+1-800-33-11-77
+1-800-665-4339
Mexico
United States
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA• 630-893-1600
France
Germany
Spain
Italy
Japan
Australia
Korea
Benelux
Poland
Canada
Russia
China
Singapore
South Africa
United Kingdom United States
2010 Fellowes, Inc. Part No. 404032
Download from Www.Somanuals.com. All Manuals Search And Download.
I.
G.
K.
ENGLISH
A.
B.
C.
Model SB-125i/SB-125Ci
KEY
D.
J.
®
A. SafeSense Technology H. Casters (2)
K. Control Panel and LEDs
1. Reverse
E.
F.
B. Paper entry
C. CD entry
D. Door
I. Disconnect power switch
6. Remove paper
7. Overheat
8. Sheet capacity indicator
J. Shipping bolts (wing nuts)
2. ON/OFF
3. Forward
To be removed prior to operation
®
E. Basket (paper)
F. Basket (CD)
G. See safety instructions
4. Bin full
5. Door open
9. SafeSense indicator (yellow)
10. Auto button
H.
CAPABILITIES
Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips
Maximum:
Sheets per pass .............................................................................................................................18*
CDs/Cards per pass .........................................................................................................................1*
Paper entry width....................................................................................................9 inches (230mm)
Will not shred: Adhesive labels, continuous form paper, transparencies, newspaper, cardboard, large
paper clips, e folders, X-rays or plastic other than noted above
Paper shred size:
*8.5 inches x11 inches, 20lb., (75g) paper at 120V, 60 Hz, C-125i 6Amps, C-125Ci 8Amps; heavier paper,
humidity or other than rated voltage may reduce capacity. Recommended daily usage rates:
100-150 paper passes; 100 cards; 10 CDs
Cross-Cut...................................................................... 5/32 inches x 1-1/2 inches (3.9mm x 38mm)
Strip Cut.............................................................................................................7/32 inches (5.8mm)
Fellowes SafeSense® shredders are designed to be operated in office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
ADvANCED PRODUCT FEATURES
INSTALLATION INSTRUCTIONS
1. Place shredder against the wall (drywall, wooden,
or concrete). Mark screw locations on wall
through back of cabinet.
Jam Proof System
Eliminates frustrating jams by preventing
overloads and powering through misfed paper
2. Drill 1/4" hole in wall for the anchor plugs.
3. Insert white plastic anchor plugs into
drilled holes.
4. Insert (2) screws through back of cabinet and
thread black rubber spacer onto the screw.
5. From inside cabinet use Phillips screw driver to
secure shredder to the wall.
Patented SafeSense® Technology
Stops shredder immediately when hands
are too close to the paper entry
Sleep Mode
Energy saving feature shuts down automatically
after 2 minutes of no shredding activity
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
•
•
Keep away from children and pets. Keep hands away from paper entry. Always
•
This shredder has a Disconnect Power Switch (I) that must be in the ON (I) position to
operate shredder. In case of emergency, move switch to OFF (O) position. This action will
stop shredder immediately.
Avoid touching exposed cutting blades under shredder head.
Keep finger away from CD hole when shredding.
Do not put foreign objects in paper entry.
The grounded socket-outlet shall be installed near the equipment and shall be
easily accessible.
WARNING: Shredder Stability - Secure Shredder to wall with hardware provided
following the instructions under Installation Instructions.
set to off or unplug when not in use.
Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away
from shredder openings. If object enters top opening, switch to
Reverse ( ) to back out object.
Never use aerosol products, petroleum based lubricants or other flammable products
on or near shredder. Do not use canned air on shredder.
•
•
•
•
•
•
Do not use if damaged or defective. Do not disassemble shredder. Do not place
near or over heat source or water.
•
•
Product is intended for commercial use only, and not for use around children.
BASIC SHREDDING OPERATION
PAPER/CARD OR CD
4
5
2
6
1
3
7
AUTO
AUTO
Continuous operation:
Press ( ) ON to activate
When finished
Plug in and put disconnect
45 minutes maximum
Feed paper/card straight
into paper entry and
release
To shred CDs rotate
CD flap into place
Hold CD at edge,
feed into CD
entry and release
Do nothing and
power switch in ON
shredding set to
shredder will go
automatically to sleep
mode
or
NOTE: Continuous operation
beyond 45 minutes will trigger
45 minute cool down period.
(I) position
OFF (
)
www.fellowes.com features an extensive on-line support section with a number of self-service options
2
Download from Www.Somanuals.com. All Manuals Search And Download.
JAM PROOF SYSTEM OPERATION*
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:
1
2
3
Up to RED: Too many
sheets have been inserted.
Remove several sheets until
indicator is below red.
Continue 100% Jam
Proof Shredding
Up to YELLOW: Productivity
is optimized.
Up to GREEN: More sheets
can be added.
If
illuminates after paper has been
If a misfeed
occurs:
All indicators light up and
shredder pauses for 3-6 seconds
Wait for flashing to stop after automatic correction
is complete. Regular shredding will resume.
reversed, press reverse and remove paper.
Otherwise, regular shredding will resume.
*100% Jam Proof when used in accordance with user manual
SLEEP MODE
SAFESENSE® TECHNOLOGY OPERATION
WHEN IN SLEEP MODE
SET-UP AND TESTING
1
2
3
2
3
4
1
AUTO
AUTO
®
®
To get out of sleep mode
touch control panel
In sleep mode
or
insert paper
Turn the shredder ON
Touch test area and
SafeSense is active and
working properly
If hand is held on SafeSense
area more than 2 seconds
shredder will shut off
®
®
(
) to activate SafeSense
look for the SafeSense
indicator to illuminate
BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
OILING SHREDDER
CLEANING AUTO-START INFRARED SENSORS
All cross-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors
may become blocked by paper dust causing the motor to run even if there is no paper present
(Note: two paper detection sensors are located in the center of the paper entry).
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
TO CLEAN THE SENSORS
1
2
3
1
2
4
3
AUTO
AUTO
Press and hold forward
) 2-3 seconds
*Apply oil across entry
Shred one sheet
Turn off and unplug
shredder
Locate Auto-start
infared sensor
Dip cotton swab in
rubbing alcohol
Using cotton swab, wipe
away any contamination
from the paper sensors
(
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
PREvENTIvE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds (SB-125Ci).
• Empty wastebasket when bin full indicator lights up.
• Shredder won’t run if the door is open, or bin needs to be emptied.
• Maintenance is an important part of protecting your investment. Don’t forget our oil (35250) and shredder bags (36054).
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the problem.
This model will require 45 minutes to cool down.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
|