Clarion CD Player CZ509 User Manual

Owner’s manual

Mode d’emploi

Manual de instrucciones

CZ509

Bluetooth^®CD/USB/MP3/WMA/AAC RECEIVER WITH

CeNET CONTROL

LECTEUR CD/USB/MP3/WMA/AAC Bluetooth^®AVEC

COMMANDE CeNET

RECEPTOR DE CD/USB/MP3/WMA/AAC Bluetooth^®

CON CONTROL CeNET

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing this Clarion product.

∗ Please read this owner’s manual in its entirety before operating this equipment.

∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.

Contents

1. FEATURES...................................................................................................................................... 3

2. PRECAUTIONS ............................................................................................................................... 4

3. CONTROLS ..................................................................................................................................... 6

Names of the Buttons and Their Main Functions ............................................................................. 6

4. DCP.................................................................................................................................................. 8

5. REMOTE CONTROL ....................................................................................................................... 9

Functions of Remote Control Unit Buttons....................................................................................... 9

Inserting the Battery ....................................................................................................................... 10

6. OPERATIONS................................................................................................................................ 11

Basic Operations............................................................................................................................ 11

Radio Operations ........................................................................................................................... 14

CD/MP3/WMA/AAC Operations..................................................................................................... 15

Bluetooth Operations...................................................................................................................... 19

Operations Common to Each Mode............................................................................................... 23

7. ACCESSORIES ............................................................................................................................. 26

USB/MTP Operations..................................................................................................................... 26

iPod Operations.............................................................................................................................. 28

Satellite Radio Operations.............................................................................................................. 31

CD Changer Operations................................................................................................................. 33

8. TROUBLESHOOTING................................................................................................................... 34

9. ERROR DISPLAYS ....................................................................................................................... 36

10. SPECIFICATIONS ......................................................................................................................... 37

11. OTHERS ........................................................................................................................................ 38

1. FEATURES

• Built in Bluetooth^®Hnadsfree (HFP) and Audio Streaming (A2DP & AVRCP)

• BBE MP for compressed audio improvement

• BEAT EQ for Sound Adjustment

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

2. PRECAUTIONS

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

CAUTION

USE OF CONTROLS, ADJUSTMENTS, OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN, MAY

RESULT IN HAZARDOUS RADIATION

EXPOSURE.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation.

THE COMPACT DISC PLAYER SHOULD NOT

BE ADJUSTED OR REPAIRED BY ANYONE

EXCEPT PROPERLY QUALIFIED SERVICE

PERSONNEL.

CHANGES OR MODIFICATIONS NOT

EXPRESSLY APPROVED BY THE

MANUFACTURER FOR COMPLIANCE

COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.

If this equipment does cause harmful

interference to radio reception, which can be

determined by turning the equipment off and on,

the user is encouraged to consult the dealer or

an experienced radio technician for help.

INFORMATION FOR USERS:

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE

MANUFACTURER WILL VOID THE

WARRANTY AND WILL VIOLATE FCC

APPROVAL.

Bottom View of Source Unit

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Flip Down Panel

This unit uses a flip-down structure that makes

possible large-size displays.

Handling Compact Discs

• Compared to ordinary music CDs, CD-R and

CD-RW discs are both easily affected by high

temperature and humidity and some of CD-R

and CD-RW discs may not be played.

Therefore, do not leave them for a long time

in the car.

CAUTION

When opening and closing the FLIP DOWN

PANEL, be careful not to catch your fingers.

They could be injured.

1. Always use this unit with the FLIP DOWN

PANEL closed.

•

Never stick labels on the surface of the

compact disc or mark the surface with a

pencil or pen.

2. Do not force operations or use this device

abnormally when opening or closing the FLIP

DOWN PANEL.

Display Screen

In extreme cold, the screen movement may slow

down and the screen may darken, but this is

normal.

3. Do not use the FLIP DOWN PANEL as a tray

to place objects on when it is open.

The screen will recover when it returns to

normal temperature.

4. When closing the FLIP DOWN PANEL, do

not press the [OPEN] button.

∗ Press the center of the DCP to close.

DCP

5. Strong impacts to the operating or display

section can cause damage or deformation.

6. If the FLIP DOWN PANEL does not open

fully, gently open it with your hand.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

3. CONTROLS

Names of the Buttons and Their Main Functions

[

]

[

]

[

]

BND

DISP

OPEN

[IR RECEIVER]

[

]

AUX

[

]

[

]

SRC

[

]

ISR

[

]

SOUND

[

]

SCN

[

]

ROTARY

]

RPT

[

], [

]

[

]

RDM

[

]

DIRECT

With the FLIP DOWN PANEL opened

[Q] (EJECT)

[CD SLOT]

[OPEN] button

[DIRECT] buttons

• Store radio stations in memory or recall it

directly while in radio mode.

•

Deeply push in [OPEN] button to unlock the flip

down panel.

[DISP] button

• Switch the display indication.

[RDM] button

• Perform random play while in CD/MP3/WMA/

AAC/USB/iPod mode.

[BND] button

• Change bands, or select seek tuning or

manual tuning while in the radio mode.

[RPT] button

• Perform repeat play while in CD/MP3/WMA/

AAC/USB/iPod mode.

[IR RECEIVER]

• Receiver for remote control unit.

(Operating range: 30° in all directions)

[SCN] button

• Perform scan play for 10 seconds of each

track while in CD/MP3/WMA/AAC/USB mode.

[AUX] input jack

• Input jack for connecting external device.

[

] (UP), [ ] (DN) buttons

• Select folders while in MP3/WMA/AAC/USB

mode.

[SOUND] button

•

Press to switch to the sound adjust mode.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Names of the Buttons and Their Main Functions

[ROTARY] knob

• Rotate to adjust the volume.

[ISR] button

• Recall ISR radio station in memory.

• Press and hold the button (2 sec.) to store

current station into ISR memory (radio mode

only).

[SRC] button

• Turn the power on/off.

[x], [v] buttons

• Commence fast-forward or fast-reverse

mode.

[

] button

• Perform preset scan while in the radio mode.

• Play or pause a track while in CD/MP3/WMA/

AAC/USB/iPod mode.

[Q] (EJECT) button

• Press to eject disc.

[CD SLOT]

• Insert CDs here.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

4. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it in

the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

2. Insert the left side of the DCP into the main

unit.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. Press the [SRC] button (1 sec.) to turn off the

power.

DCP

2. Deeply push in [OPEN] button to unlock the

flip down panel.

Storing the DCP in the DCP Case

If the flip down panel does not open fully,

gently open it with your hand.

Hold the DCP, in the orientation as shown in the

figure below, and put it into the supplied DCP

case. (Ensure the DCP is in the correct

orientation.)

[

] button

OPEN

DCP

3. Pull the DCP toward you and remove it.

DCP case

CAUTION

DCP

• The DCP can easily be damaged by

shocks. After removing it, be careful not to

drop it or subject it to strong shocks.

• If the FLIP DOWN PANEL is kept open, the

DCP may drop due to vibration of the car.

This results in damage to the DCP. So

close the FLIP DOWN PANEL or remove

the DCP to store into the case.

4. Close the HOLD FLAP.

• The connector connecting the source unit

and the DCP is an extremely important

part. Be careful not to damage it by

pressing on it with fingernails,

screwdrivers, etc.

HOLD FLAP

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

CAUTION

Be sure to close the HOLD FLAP for safety

when removing the DCP.

Attaching the DCP

1. Insert the right side of the DCP into the main

unit.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

5. REMOTE CONTROL

Functions of Remote Control Unit Buttons

∗ Some buttons on the remote control unit have different functions from the corresponding buttons on the main

unit.

● Radio/Satellite Radio modes

Signal transmitter

[BND] button

• Switches reception band.

[x], [v] buttons

• Moves preset channels up and down.

[

]

[

]

SRC

BND

[SCN] button

• Press to perform preset scan.

• Press and hold the button (2 sec.) to perform

auto store.

• In the Satellite Radio mode, press once to

perform category scan; hold depressed

(1 sec.) to perform preset scan.

[

]

[

]

MUTE

DISP

[

ISR

[

]

RDM

]

RPT

[

]

SCN

● CD/MP3/WMA/AAC and USB/MTP

modes

[BND] button

• Press to play the first track.

[x], [v] buttons

• Press to select tracks.

• Press and hold the button (1 sec.) to perform

fast-forward/fast-reverse (Except DRM file).

● Shared modes

[SRC] button

• Press the button to turn on the power.

Press and hold the button (1 sec.) to turn off

[

] button

the power.

• Switches between playback and pause.

• Use to alternate operation mode among the

various modes.

[SCN] button

• Press to perform scan play.

[w], [z] buttons

•

When in MP3/WMA/AAC and USB/MTP

modes, press and hold the button (1 sec.) to

perform folder scan play.

• Increases and decreases volume.

[MUTE] button

• Turns mute function on and off.

[ISR] button

• Recalls ISR radio station stored in memory.

• Press and hold the button (2 sec.) to store

current station in ISR memory (radio mode

only).

[DISP] button

• Press to select the desired display.

[RPT] button

• Press to perform repeat play.

•

When in MP3/WMA/AAC and USB/MTP

modes, press and hold the button (1 sec.) to

perform folder repeat play.

[RDM] button

• Press to perform random play.

•

When in MP3/WMA/AAC and USB/MTP

modes, press and hold the button (1 sec.) to

perform folder random play.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Functions of Remote Control Unit Buttons

[RDM] button

• Press to perform random play.

• Press and hold the button (1 sec.) to perform

disc random play.

● CD changer mode

[BND] button

•

Press to switch to next disc in ascending order.

[x], [v] buttons

• Press to move the tracks up and down.

● iPod mode

• Press and hold the button (1 sec.) to perform

fast-forward/fast-backward.

[x], [v] buttons

• Press to move the tracks up and down.

[

] button

• Press and hold the button (1 sec.) to perform

fast-forward/fast-reverse.

• Switches between playback and pause.

[SCN] button

• Press to perform scan play.

• Press and hold the button (1 sec.) to perform

disc scan play.

[RPT] button

• Press to perform repeat play.

• Press and hold the button (1 sec.) to perform

disc repeat play.

[

] button

• Switches between playback and pause.

[RPT] button

• Press to perform repeat play.

[RDM] button

• Press to perform random play.

• Press and hold the button (1 sec.) to perform

all random play.

Inserting the Battery

Notes:

1 Turn over the remote control unit and slide

the cover in the direction indicated by the

arrow in the illustration.

Misuse may result in rupture of the battery,

producing leakage of fluid and resulting in

personal injury or damage to surrounding

materials. Always follow these safety precautions:

• Use only the designated battery.

• When replacing the battery, insert properly, with

+/– polarities oriented correctly.

• Do not subject battery to heat, or dispose of in

fire or water. Do not attempt to disassemble the

battery.

2 Insert the battery (CR2025) into the insertion

guides, with the printed side (+) facing

upwards.

3 Press the battery in the direction indicated by

the arrow so that it slides into the

compartment.

4 Replace the cover and slide in until it clicks

into place.

• Dispose of used batteries properly.

Insertion guide

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

6. OPERATIONS

Note:

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 6.

Basic Operations

Switching the display

Press the [DISP] button to select the desired

CAUTION

Be sure to lower the volume before

switching off the unit power or the ignition

key. The unit remembers its last volume

setting.

display.

Sound Adjustment

You can adjust a sound effect or tone quality to

your preference.

Turning on/off the power

Note:

1. Press the [SRC] button to turn on the power.

To change sound setting

1. Press the [SOUND] button to switch to the

sound adjustment selection display.

2. Press and hold the [SRC] button (1 sec.) to

turn off the power for the unit.

∗ The factory default sound setting is “BEAT

EQ”.

2. Then press the [x] or [v] button to

select the sound adjustment mode.

Note:

• System check

The first time this unit is turned on after the wire

connections are completed, it must be checked

what equipment is connected. When the power

is turned on, the “SYSTEM CHECK” appears in

the display, then the unit returns to the clock

display mode. The system check starts within the

unit. Then press the [SRC] button again, the unit

turn to the radio mode.

Each time you press the [x] or [v]

button, the sound adjustment mode

changes as following order:

“BEAT EQ” ↔ “M-B EX” ↔ “BALANCE” ↔

“FADER” ↔ “LPF” ↔ “S-W VOL” ↔ “HPF”

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

Selecting a mode

1. Press the [SRC] button to change the

3. Press the [ ] or [ ] button to adjust the

selected audio mode.

operation mode.

2. Each time you press the [SRC] button, the

operation mode changes in the following

order:

4. After completing settings, press the

[SOUND] button to return to the previous

mode.

Radio ➜ (Satellite radio) ➜ CD/MP3/WMA/

AAC ➜ USB/MTP/iPod ➜ BLUETOOTH ➜

(CD changer) ➜ AUX ➜ Radio...

∗ External equipment not connected with

CeNET is not displayed.

●Setting the BEAT EQ

This unit is provided with 4 types of sound tone

effects stored in memory.

∗ iPod/MTP can connect to this unit via USB

cable.

Select the one you prefer.

∗ The factory default setting is “OFF”.

2-1. Select “BEAT EQ”.

Adjusting the volume

1. Turning the [ROTARY] knob clockwise

increases the volume; turning it

counterclockwise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

BASS<Q>:The factory default setting is “1”.

(Adjustment range: 0.7/1/1.4/2)

3-1. Each time you press the [ ] or [

]

button, the tone effect changes in the

following order:

MID<G> : The factory default setting is “0”.

(Adjustment range: +7 to -7)

“CUSTOM” ↔ “EXCITE” ↔ “IMPACT” ↔

“B-BOOST” ↔ “OFF”

MID<F>

The factory default setting is “500”.

(Adjustment range: 500/1K/2K)

CUSTOM : user custom

MID<Q> : The factory default setting is “1”

(Adjustment range: 0.7/1/1.4/2)

TREBLE<G> The factory default setting is

(Adjustment range: +7 to -7)

TREBLE<F>:The factory default setting is

10K”.

(Adjustment range: 5K/10K/15K)

The factory default setting is

EXCITE : bass and treble emphasized

mid emphasized

“0

”

IMPACT : bass and treble emphasized

B-BOOST : bass emphasized

OFF

: no sound effect

“

When “CUSTOM” is set:

3-1. Press the [ ] button.

TREBLE<Q>

“1”

3-2. Press the [x] or [v] button to select the

“BASS, MID” or “TREBLE” mode to adjust.

(Adjustment range: 0.7/1/1.4/2)

3-4. Press the [ ] button to return to the

previous mode.

3-3. If you want to set the flat, press the [

]

button to return to the “CUSTOM” mode,

●Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust

the low frequencies like the normal sound

adjustment function, but emphasizes the deep

bass frequencies to provide you with a dynamic

sound.

∗ The factory default setting is “OFF” (off).

2-1. Select “M-B EX”.

3-1. Press [ ] or [ ] button to select “ON” or

“OFF”.

then press and hold the [ ] button for

1second or longer, bass/mid/treble

characteristics become flat.

When “EXCITE/IMPACT/B-BOOST” is set:

3-1. Press the [ ] button.

3-2. Press the [ ] or [ ] button to adjust the

setting in the range of –3 to +3.

∗ The factory default setting is “0”.

3-3. Press the [ ] button to return to the

previous mode.

●Adjusting the balance

2-1. Select “BALANCE”.

3-1. Press the [ ] or [ ] button to adjust the

balance of the right and left speakers.

●Adjusting the BASS/MID/TREBLE

This adjustment can be performed only when

the BEAT EQ is set to “CUSTOM”.

Note:

∗ The factory default setting is “CENTER”

(center). (Adjustment range: RIGHT12 to

LEFT12 (right 12 to left 12))

• While connected with the external amplifers,

please do not set the “BASS/MID/TREBLE” in

the maximum level. Otherwise the speakers may

be damaged.

●Adjusting the fader

2-1. Select “FADER”.

3-1. Press the [ ] or [ ] button to adjust the

balance of the rear and front speakers.

3-1. Press the [ ] button.

3-2. Press the [x] or [v] button to select as

following order.

“BASS<G>” ↔ “BASS<F>” ↔

∗ The factory default setting is “CENTER”

(center). (Adjustment range: FRONT12 to

REAR12 (front 12 to rear 12))

“BASS<Q>” ↔ “MID<G>” ↔ “MID<F>” ↔

“MID<Q>” ↔ “TREBLE<G>” ↔

“TREBLE<F>” ↔ “TREBLE<Q>”

●Setting the subwoofer

You can set the low pass filter of subwoofer.

2-1. Select “LPF”.

∗ The factory default setting is “BASS G”.

3-3. Press the [ ] or [ ] button to select the

setting.

3-1. Each time press the [ ] or [ ] button to

select the setting, the setting changes in

the following order:

BASS<G>:The factory default setting is “0”.

(Adjustment range: +7 to –7)

BASS<F>:The factory default setting is “50”.

(Adjustment range: 50/100/200)

“THROUGH” ↔ “60” ↔ “90” ↔ “120”

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operations

∗ The factory default setting is “THROUGH”.

Setting the BBE MP

(Sound Enhancement and

Restoration for compressed audio

files)

●Adjusting the subwoofer output

volume

You can adjust the volume output from the unit’s

subwoofer output terminal.

BBE MP (Minimized Polynomial Non-Linear

Saturation) Process improves digitally

2-1. Select “S-W VOL”.

compressed sound, such as MP3, by restoring

and enhancing the harmonics lost through

compression. BBE MP works by regenerating

harmonics from the source material, effectively

recovering warmth, detail and nuance.

3-1. Press the [ ] or [ ] button to increases

or decreases the subwoofer volume.

∗ The factory default setting is “0”.

(Adjustment range: +6 to –6)

●Adjusting the high pass filter

2-1. Select “HPF”.

3-1. Each time you press the [ ] or [

button to select the setting.

∗ This fuction is effective for the audio files in the

CD/MP3/WMA/AAC or USB/iPod mode, but it is

ineffective for the video in the USB/iPod mode.

]

1. Press the [SOUND] button to switch to the

sound adjustment selection display.

The setting changes in the following order:

“THROUGH” ↔ “60” ↔ “90” ↔ “120”

∗ The factory default setting is “THROUGH”

(through).

2. Press the [x] or [v] button to select

“BBE MP”.

3. Press the [ ] or [ ] button to select “ON”

or “OFF”.

∗ The factory default setting is “OFF”.

4. When you select “ON”, press the [ ] button,

then press the [ ] or [ ] button to select

as following order.

LOW ↔ MID ↔ HIGH

Notes:

• Manufactured under license from BBE Sound,

Inc.

• Licensed by BBE Sound, Inc. under one or more

of the following US patents: 5510752, 5736897.

BBE and BBE symbol are registered trademarks

of BBE Sound, Inc.

• During SOUND adjustment mode, if no operation

is performed for more than 10 seconds, this

mode can be cancelled and return to previous

mode.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operations

Listening to the radio

1. Press the [SRC] button and select the radio

Auto store

Auto store is a function for storing up to 6

stations that are automatically tuned in

sequentially. If 6 receivable stations cannot be

received, a previously stored station remains

unoverwritten at the memory position.

mode.

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the

radio reception band changes in the

following order:

1. Press the [BND] button and select the

desired band (FM or AM).

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

2. Press and hold the [ ] button for 2 seconds

or longer. The stations with good reception

are stored automatically to the preset

channels.

Tuning

There are 3 types of tuning mode available,

seek tuning, manual tuning and preset tuning.

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

Seek tuning

1. Press the [BND] button and select the

desired band (FM or AM).

Preset scan

∗ If “MANU” is lit in the display, press and hold

the [BND] button (1 sec.). “MANU” in the

display goes off and seek tuning is now

available.

Preset scan receives the stations stored in

preset memory in order. This function is useful

when searching for a desired station in memory.

1. Press the [ ] button.

2. Press the [x] or [v] button to

automatically seek a station.

2. When a desired station is tuned in, press the

[

] button again to continue receiving that

station.

Note:

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

• Be careful not to press and hold the [ ] button

(2 sec.), otherwise the auto store function is

engaged and the unit starts storing stations.

● Quick tuning

Press and hold the [x] or [v] button (1 sec.)

to tune in a station.

Instant station recall (ISR)

● Step tuning

Instant station recall is a special radio preset

that instantly accesses a favorite radio station at

a touch of a button. The ISR function even

operates with the unit in other modes.

Press the [x] or [v] button to manually tune

in a station.

● ISR memory

Recalling a preset station

1. Select the station that you wish to store in

ISR memory.

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio

stations in memory. Press the corresponding

2. Press and hold the [ISR] button (2 sec.).

● Recalling a station with ISR

[DIRECT] button or the [ ] / [ ] button to

recall the stored radio frequency automatically.

In any mode, press the [ISR] button to turn on

the radio function and tune the selected radio

station. “ISR” appears in the display. Press the

[ISR] button again to return to the previous

mode.

Manual memory

1. Select the desired station with seek tuning or

manual tuning.

2. Press and hold one of the [DIRECT] buttons

(2 sec.) to store the current station into

preset memory.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

2. The folder name and file name can be

displayed as the title during MP3/WMA/AAC

play but the title must be within 64 single

byte alphabetical letters and numerals

(including an extension).

MP3/WMA/AAC

This unit can play back MP3/WMA/AAC files.

Notes:

• If you play a file with DRM (Digital Rights

Management) for WMA remaining ON, no audio

is output (The WMA indicator blinks).

• Windows Media™, and the Windows® logo are

trademarks, or registered trademarks of

Microsoft Corporation in the United States and/or

other countries.

3. Do not affix a name to a file inside a folder

having the same name.

● Folder structure

1. A disc with a folder having more than 8

hierarchical levels will be impossible.

● To disable DRM (Digital Rights

Management)

● Number of files or folders

1. Up to 255 files can be recognized per folder.

Up to 510 files can be played.

1. When using Windows Media Player 9/10/11,

click on TOOL ➜ OPTIONS ➜ MUSIC

RECORD tab, then under Recording

settings, unclick the Check box for RECORD

PROTECTED MUSIC. Then, reconstruct

files.

2. Tracks are played in the order that they were

recorded onto a disc. (Tracks might not

always be played in the order displayed on

the PC.)

3. Some noise may occur depending on the

type of encoder software used while

recording.

Personally constructed WMA files are used

at your own responsibility.

Precautions when creating MP3/

WMA/AAC file

Set the type of file to be played

(multi-session function)

● Usable sampling rates and bit rates

1. MP3: Sampling rate 8 kHz-48 kHz,

Bit rate 8 kbps-320 kbps / VBR

2. WMA: Bit rate 8 kbps-320 kbps

3. AAC: Sampling rate 8 kHz-48 kHz,

Bit rate 8 kbps-320 kbps / VBR

When a single disc holds both normal CD type

tracks and MP3/WMA/AAC type tracks, use this

command to select which type of track to play.

∗ Default setting is “CD”.

•

When only one type of track (either music CD

or MP3/WMA/AAC) is recorded on a disc,

selecting either type will allow playback of the

disc.

● File extensions

1. Always add a file extension “.MP3”, “.WMA”

or “.M4A” to MP3, WMA or AAC file by using

single byte letters. If you add a file extension

other than specified or forget to add the file

extension, the file cannot be played.

•

When playing CCCD (copy-control CDs), set

to CD type.

1. Press and hold the [DISP] button for 1

second or longer.

2. Press the [x] or [v] button to select

“M-SESS”.

2. Files without MP3/WMA/AAC data will not

play. The files will be played soundlessly if

you attempt to play files without MP3/WMA/

AAC data.

3. Press the [ ] or [ ] button to select the

“CD” or “MP3”.

• “CD”

∗ When VBR files are played, the play time

display may differ the play location.

When playing music CD only.

∗ When MP3/WMA/AAC files are played, a little

no sound part is caused between tunes.

• “MP3”

When playing music MP3/WMA/AAC only.

● Logical format (File system)

4. When setting is completed, remove the disc

1. When writing MP3/WMA/AAC file on a CD-R

disc or CD-RW disc, please select “ISO9660

level 1, 2 or JOLIET or Romeo” or APPLE

ISO as the writing software format. Normal

play may not be possible if the disc is

recorded on another format.

and reinsert it.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

Disc-In-Play function

As long as the ignition key is turned to the ON or

ACC position, this function allows you to turn the

power to the unit and start playing the disc

automatically when the disc is inserted even if

the power is not turned on.

Loading a CD

1. Press the [OPEN] button to access the CD

SLOT behind the FLIP DOWN PANEL.

2. Insert a CD into the center of the CD SLOT

with the labeled side facing up. “LOADING”

appears in the display, the CD enters into the

slot, and the play starts.

CAUTION

Notes:

• Do not try to put your hand or fingers in

the disc insertion slot. Also never insert

foreign objects into the slot.

• Never insert foreign objects into the CD SLOT.

• If the CD is not inserted easily, there may be

another CD in the mechanism or the unit may

require service.

• Do not insert discs where adhesive comes

out from cellophane tape or a rental CD

label, or discs with marks where

• Discs not bearing the

mark and

CD-ROMs cannot be played by this unit.

• Some CDs recorded in CD-R/CD-RW mode may

not be usable.

cellophane tape or rental CD labels were

removed. It may be impossible to extract

these discs from the unit and they may

cause the unit to break down.

3. Close the FLIP DOWN PANEL.

∗ Press the center of the DCP to close.

CAUTION

Backup Eject function

Be careful not to catch your hand or fingers

while closing the FLIP DOWN PANEL.

Just pressing the [Q] button, ejects the disc

even if the power to the unit was not turned on.

Notes:

1. Press the [OPEN] button to open the FLIP

DOWN PANEL.

Note:

∗ If the FLIP DOWN PANEL will not open far

enough, open it gently with your hand.

∗ If the FLIP DOWN PANEL does not open fully,

gently open with your hand.

∗ After loading a CD, always close the FLIP DOWN

PANEL.

2. Press the [EJECT] button. Remove the disc

Pausing play

after it is ejected.

1. Press the [ ] button to pause play.

3. Close the FLIP DOWN PANEL.

∗ Press the center of the DCP to close.

Notes:

“PAUSE” appears in the display.

2. To resume CD play, press the [ ] button

again.

• Always close the FLIP DOWN PANEL once you

take out the disc.

• If a CD (12 cm) is left in the ejected position for

15 seconds, the CD is automatically reloaded

(Auto reload).

• If you force a CD into before auto reloading, this

can damage the CD.

Displaying CD titles

This unit can display title data for CD-text/MP3/

WMA/AAC disc and user titles input with this

unit.

1. Each time you press the [DISP] button to

change the title display.

Listening to a disc already loaded in

the unit

Press the [SRC] button to select the CD/MP3/

WMA/AAC mode.

● CD-TEXT disc

User ➜ Track ➜ Disc/Artist ➜ User ...

● MP3/WMA/AAC disc

Track ➜ Folder ➜ Title/Album ➜ Artist ➜

Track ...

When the unit enters the CD/MP3/WMA/AAC

mode, play starts automatically.

If there is no disc loaded, the indication “NO

DISC” appears in the title display.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

Notes:

Top function

The top function resets the CD player to the first

track of the disc. Press the [BND] button to play

the first track (track No. 1) on the disc.

∗ In case of MP3/WMA/AAC, the first track of a

folder being played will be returned.

• If the CD playing is not a CD-text CD or no user

title has been input, “NO TITLE” appears in the

display.

• If MP3/WMA/AAC disc is not input TAG, “NO

TITLE” appears in the display.

• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.

• Tag displays give priority to V2.3 / 2.2.

• In the case of album Tags for WMA, the

information written into the extension header is

displayed.

List search function

1. Press and hold the [BND] button (1 sec.) to

enter the list search mode. And then the

track list appears in the display.

• Only ASCII characters can be displayed in Tags.

2. Prsee the [ ] or [ ] button to select a

track.

Selecting a track

∗ If you press the [x] or [v] button, the

● Track-up

track list scroll 5 lines at a time.

1. Press the [v] button to move ahead to the

beginning of the next track.

3. Press the [ ] button to play.

2. Each time you press the [v] button, the

track advances ahead to the beginning of the

next track.

∗ In case of MP3/WMA/AAC, this function is

performed in the current folder.

Note:

● Track-down

• If no operation is performed for more than 10

seconds, this mode can be cancel and return to

the usual mode.

1. Press the [x] button to move back to the

beginning of the current track.

2. Press the [x] button twice to move back to

the beginning of the previous track.

Other various play functions

●Scan play

This function allows you to locate and play the

first 10 seconds of all the tracks recorded on a

disc.

Fast-forward/fast-reverse

● Fast-forward

1. Press and hold the [v] button (1 sec.).

● Fast-reverse

1. Press and hold the [x] button (1 sec.).

∗ For MP3/WMA/AAC discs, it takes some time

until the start of searching and between tracks. In

addition, the playing time may have a margin of

error.

1. Press the [SCN] button to perform scan play.

●Folder scan play

This function allows you to locate and play the

first 10 seconds of the first track of all the folders

on an MP3/WMA/AAC disc.

1. Press and hold the [SCN] button (1 sec.) to

perform folder scan play.

Folder Select

●Repeat play

This function allows you to select a folder

containing MP3/WMA/AAC files and start

playing from the first track in the folder.

This function allows you to play the current track

repeatedly.

1. Press the [RPT] button to perform repeat

play.

1. Press the [ ] or [ ] button.

Press the [ ] button to move the next

folder. Press the [ ] button to move the

previous folder.

●Folder repeat play

This function allows you to play a track currently

being played in the MP3/WMA/AAC folder

repeatedly.

2. To select a track, press the [x] or [v]

button.

1. Press and hold the [RPT] button (1 sec.) to

perform folder repeat play.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

CD/MP3/WMA/AAC Operations

●Random play

This function allows you to play all tracks

recorded on a disc in a random order.

1. Press the [RDM] button to perform random

play.

●Folder random play

This function allows you to play all the tracks of

all the folders recorded on an MP3/WMA/AAC

disc in a random order.

1. Press and hold the [RDM] button (1 sec.) to

perform folder random play.

●To cancel play

1. Press the operating button previously

selected.

∗ The various play mode is canceled and the

various play off mode appears in the display

for 2 seconds.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth Operations

The Bluetooth allows you to utilize your car’s

built-in audio system for wireless mobile phone

or music handsfree communication.

Making a call

There are 4 ways to make outgoing call.

●Direct Number Call

Outgoing call can be made by entering

telephone numbers directly via the car stereo.

Some Bluetooth mobile phones have the audio

features, and some portable audio players

support Bluetooth feature.

Telephone number uses 0, 1, 2, 3, 4, 5, 6, 7, 8,

9, *, #, and +.

This system can play audio data stored in a

Bluetooth audio device.

1. Press the [BND] button to select “DIAL

NUMBER”.

The car stereo with Bluetooth will be able to

retrieve phonebook contacts, received call,

dialed call, missed call, incoming calls, outgoing

call, redial call and listen to music.

2. Press the [ ] button.

3. Press the [ ] or [ ] button to select the

numbers.

Notes:

4. Press the [x] or [v] button to input or

• Do not leave the microphone of Bluetooth

handsfree in the places with wind passing such

as air outlet of the air conditioner, etc. This may

cause a malfunction. In addition, if leave it in the

places subjected to direct sun, high temperature

can cause distortion, discoloration which may

result in a malfunction.

delete the number.

5. Press and hold the [ ] button (1 sec.) to call

the mobile phone No.

∗ Press the [SOUND] button to end the call.

●Call from Phonebook

User can search the contact name in the

phonebook and make call.

• This system will not operate or may operate

improperly with some Bluetooth audio players.

• For detailed information on the playable

Bluetooth audio players, see our home page:

www.clarion.com

• When a audio device is paired, the following

operations are the same as for CD mode:

Alternatively, user can call from mobile phone.

1. Press the [BND] button to select “PHONE

BOOK”.

2. Press the [v] button to enter the contact

name mode (In this case, use the [ ], [

button to select the desired contact name).

]

∗ Pause

∗ Track selection

∗ Fast-foward

∗ Fast-reverse

The titles and the play time can not appear in

the display.

3. When the contact name is displayed, press

the [v] or [x] button to select the contact

name’s phone number.

4. Press the [ ] button to call the mobile

phone No.

See “CD/MP3/WMA/AAC Operations”

(page 15) for details.

∗ Press the [SOUND] button to end the call.

●Answering a call

1. You can answer an incoming call by pressing

any button.

Basic Operations

∗ Press the [SOUND] button to reject an

incoming call.

Select Bluetooth

●Received/Dialled/Missed Call History

You can search any Received/Dialled/Missed

Call History.

1. Press the [SRC] button to switch the source.

2. You can press and hold the [SOUND] button

to disconnect the currently connected

device.

1. Press the [BND] button to select “HISTORY”.

2. Press the [v] button to enter the contact

Switch the display

Press the [DISP] button to select the display in

name mode (In this case, use the [ ], [

button to select the desired contact name).

]

the following order:

3. When the contact name is displayed, press

the [x] or [v] button to select the contact

“BT TEL” ➜ “BT AUDIO”

∗ The connected device name will appear in the

display.

name’s phone number.

4. Press the [ ] button to call the mobile

phone No.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth Operations

●Redial a call

4-1. Press the [ ] or [ ] button to select

“SEARCH” or “WAIT”.

You can call a redial phone No.

1. Press the [BND] button to select “REDIAL”.

2. Press and hold the [ ] button (1 sec.) to call

the redial phone No.

5-1. Press and hold the [ ] button (1 sec.).

∗ When the “SEARCHING” appears in the

display, you can press the [ ] button to

stop search, then the list search appear.

∗ Press the [SOUND] button to end the call.

“SEARCH” mode: User can search the

Bluetooth mobile phone or audio device.

To change Bluetooth adjustment setting

“WAIT” mode: User can search this uint via

the mobile phone or audio device.

1. Press and hold the [DISP] button (1 sec.)

to switch to the Bluetooth adjustment

selection display.

2. Press the [x] or [v] button to select

the “item name”.

6-1. After the search, press the [ ] or [

button to select the desired Bluetooth

mobile phone.

]

7-1. Press and hold the [ ] button (1 sec.) to

“PAIRING” ↔ “SELECT” ↔ “DELETE” ↔

“DISCONNECT” ↔ “ADD PHONE BOOK”

↔ “DEL NO. PHONE BOOK” ↔

“HISTORY DELETE ALL” ↔ “PHONE

BOOK TYPE” ↔ “MIC GAIN” ↔ “RING

VOL” ↔ “TONE SEL” ↔ “NOISE” ↔

“AUTO ANS” ↔ “AUTO CON” ↔ “PASS

KEY” ↔ “ADDRESS” ↔ “BT NAME” ↔

“BT FW”

pair.

●SELECT

This is a setting for user to select one of the

paired mobile phones or audio.

2-1. Select “SELECT”.

3-1. Press the [ ] button, then the paired

mobile phones appears in the display.

4-1. Press the [ ] or [ ] button to choose one

of the 5 mobile phones.

3. Press the [ ] or [ ] button to select the

“desired setting value”.

5-1. Press and hold the [ ] button (1 sec.) to

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

connect.

Connected device will be able to use all the

functionalities provided.

●DELETE

This is a setting for user to delete one of the

paired device from the list.

●PAIRING

This option is used to perform Bluetooth pairing

with the mobile phone and audio.

2-1. Select “DELETE”.

3-1. Press the [ ] button, then the paired

mobile phones appears in the display.

4-1. Press the [ ] or [ ] button to choose one

of the 5 phones and a audio devices.

Up to a maximum of 5 mobile phones and a

audio device can be paired.

2-1. Select “PAIRING”.

3-1. Press the [ ] button.

5-1. Press and hold the [ ] button (1 sec.) to

delete the paired device.

Notes:

• After deleting the device, the phone book and

the call history records will be deleted too.

• Deleted paired device will not automatically

rearrange in the paired device list.

3-2. Press the [ ] or [ ] button to select

“TELEPHONE” or “AUDIO”, then press the

[

] button.

For a no paired device after reset or at the same

time, when you select “TELEPHONE”, please

press the [ ] or [ ] button to select the phone

book type.

(For details, see the chaperter “PHONE BOOK

TYPE” (page 21))

●DISCONNECT

This option is used to disconnect the currently

connected device.

3-3. After select the “TELEPHONE”, press the

2-1. Select “DISCONNECT”.

3-1. Press and hold the [ ] button (1 sec.) to

[

] or [ ] button to select “MEMORY 1”

to “MEMORY 5”, then press and hold the

disconnect.

∗ Press and hold the [SOUND] button (2 sec.)

to disconnect.

[

] button (1 sec.) to memory.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth Operations

Notes:

●ADD PHONE BOOK

• If you change the phone book type, all of the

paired mobile phones’s book data will be

deleted.

This option is used to add one of the phone No.

2-1. Select “ADD PHONE BOOK”.

3-1. Press the [ ] button (1 sec.), then the

“RECEIVING” appears in the display.

• The piece number of the phone book’s record

can be stored in the different memory of the

phone book type are as follow:

∗ At the same time the phone No. from the

paired phone book list is sent out, then there

is a prompt on the mobile phone if it is

successful.

PHONE

MEMORY MEMORY MEMORY MEMORY MEMORY

TYPE

∗ Some mobile phones cannot transfer the

phone book to this unit because of the less

word and the language type. In this time,

please edit your phone book in other

language, and transer it once again.

250

0 piece

piece

200

piece

100

piece

100

piece

100

piece

100

piece

100

piece

100

piece

100

piece

●DEL NO. PHONE BOOK

This option is used to delete one of or all phone

No. of the added phone book.

●MIC GAIN

MIC gain can be set by each paired mobile

phone device. Each registered device has

unique MIC gain setting.

2-1. Select “DEL NO. PHONE BOOK”.

3-1. Press the [ ] button.

4-1. Press the [ ] or [ ] button to select

“1 DEL” or “ALL DEL”.

2-1. Select “MIC GAIN”.

3-1. Press the [ ] or [ ] button to change the

MIC gain setting.

∗ The factory default setting is “3”.

(Adjustment range: 1 to 5)

5-1. When you select “1 DEL”, press the [

]

button, then press the [ ] or [ ] button to

select one of the desired phone No.

6-1. Press the [ ] button, then the “DELETE?”

appears in the display.

7-1. Press the [ ] button (1 sec.) to delete.

Note:

• If you want to transfer or handl this unit, please

perform “DELETE”,“ADD PHONE BOOK” and

“DEL NO. PHONE BOOK” function to delete all

of your personal information.

●RING VOL

This option is used to change the ringing volume

by each paired mobile phone device.

2-1. Select “RING VOL”.

3-1. Press the [ ] or [ ] button to change the

ringing volume.

∗ The factory default setting is “5”.

(Adjustment range: 1 to 10)

●TONE SEL

●HISTORY DELETE ALL

The system can ring if the mobile phone cannot

ring when the Bluetooth connection has been

established.

This option is used to delete all of the call records.

2-1. Select “HISTORY DELETE ALL”.

3-1. Press the [ ] button, then the

“CONFIRM?” appears in the display.

4-1. Press the [ ] button (1 sec.), then the

“DELETING” appears in the display, detele

all of the call records successfully.

2-1. Press “TONE SEL”.

3-1. Press the [ ] or [ ] button to select

“INTERNAL” or “AUTO”.

∗ The unit setting is “AUTO”.

“INTERNAL”: Adjust tone in the car

bluetooth system.

●PHONE BOOK TYPE

The unit provide 3 types of phone book which

are stored in memory.

“AUTO”: Automatic adjustment is enabled

in the paired mobile phone.

2-1. Select “PHONE BOOK TYPE”.

3-1. Press the [ ] button.

●NOISE

This option is used to set noise volume in the

car bluetooth system.

3-2. Press the [ ] or [ ] button to select “1”,

“2” or “3”, then press the [ ] button to

store in memory.

2-1. Press “NOISE”.

3-1. Press the [ ] or [ ] button to select

“LOW” or “HIGH”.

∗ The factory default setting is “LOW”.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth Operations

●AUTO ANS

●Bluetooth Firmware version

This will display the Firmware version of the

Bluetooth.

This is a setting to determine whether any

incoming call will be automatically or manually

answered.

2-1. Select “BT FW”.

∗ The factory default setting is “OFF”.

2-1. Select “AUTO ANS”.

The Bluetooth Firmware version appears in

the display.

3-1. Press the [ ] or [ ] button to select “ON”

or “OFF”.

ON: Any incoming call is automatically

answered in 5 seconds.

OFF: User needs to manually answer the

call.

●AUTO CONNECT

This function allows the Bluetooth to be

connected automatically with previously

connected device. Connection can be

established at any source mode.

∗ The factory default setting is “OFF”.

2-1. Select “AUTO CON”.

3-1. Press the [ ] or [ ] button to select “ON”

or “OFF”.

ON: Automatic connection is enabled.

OFF: Automatic connection is disabled.

●PASS KEY

This PASS KEY is used during pairing mode. A

maximum of 10 digits can be changed through

the car stereo.

∗ The factory default PASS KEY is “1234”.

2-1. Select “PASS KEY”.

3-1. Press the [ ] button.

4-1. Press the [x] or [v] button to remove

the cursor.

5-1. Press the [ ] or [ ] button to select the

desired digits.

6-1. Press and hold the [ ] button (2 sec.) to

store in memory.

∗ If press the [BND] button, the pass key

returns to the factory default setting.

●ADDRESS

This will hold the unique Bluetooth address. The

address is 12 figures.

2-1. Select “ADDRESS”.

The Bluetooth address 6 figures appears in

the display.

3-1. Press the [ ] or [ ] button to display.

●Bluetooth Name

This will display the name of the Bluetooth.

2-1. Select “BT NAME”.

The Bluetooth name appears in the display.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

●Displaying the settings

To change adjustment setting

The number of indicator of this unit decreases,

you can see the state of current settings at any

operation mode.

1. Press and hold the [DISP] button (1 sec.)

to switch to the adjustment selection

display.

2-1. Select “SETTINGS”.

3-1. Press the [ ] or [ ] button to display the

state of current settings.

2. Press the [x] or [v] button to select

the “item name”.

∗ When the setting is selected, after 1 second

the current state will be displayed.

“CLOCK” ↔ “CONTRAST” ↔

“SETTINGS” ↔ “SCRN SVR” ↔

“MESSAGE INPUT” ↔ “SCROLL” ↔

“DIMMER” ↔ “BLINKLED” ↔

For example:

after 1 second,

“A-CANCEL” ↔ “SYSTEM CHECK”

3. Press the [ ] or [ ] button to select the

“desired setting value”.

●Turning the screen saver function on

or off

∗ In the case of display blinking “ENT”, you

can press the [ ] button to adjust the

setting value.

∗ After completing settings, press the [DISP]

button to return to the previous mode.

This unit is provided with the screen saver

function which allows you to show various kinds

of patterns and characters in the operation

status indication area of the display in a random

order. You can turn on or off this function. If the

button operation is performed with the screen

saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

●Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [ ] button.

3-2. Press the [x] or [v] button to select the

hour or the minute.

3-3. Press the [ ] or [ ] button to set the

correct time.

∗ The clock is displayed in 12-hour format.

3-4. Press the [ ] button to store the time into

∗ The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [ ] or [ ] button to select the

setting.

Each time you press the [ ] or [

]

memory.

button, the setting changes in the following

Note:

order:

• You cannot set the clock when it is displayed

with only the ignition on. If you drain or remove

the car’s battery or take out this unit, the clock is

reset. While setting the clock, if another button or

operation is selected, the clock set mode is

canceled.

“MESSAGE” ↔ “OFF” ↔ “ON”

●Entering message information

Message up to 30 characters long can be stored

in memory and displayed as a type of screen

saver setting.

●Setting the contrast

You can adjust the display contrast to match the

angle of installation of the unit.

∗ The factory default setting is “10”.

(Adjustment level: 1 to 16)

∗ The factory default setting is “WELCOME TO

CLARION”.

2-1. Select “MESSAGE INPUT”.

3-1. Press the [ ] button.

3-2. Press and hold the [BND] button (1 sec.) to

2-1. Select “CONTRAST”.

clear the old message.

3-1. Press the [ ] or [ ] button to adjust the

3-3. Press the [x] or [v] button to move the

cursor.

contrast.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

3-4. Press the [BND] button to select a

character type. Each time you press the

[BND] button, the character type changes

in the following order:

●Setting the external amplifier

∗ The factory default setting is “OFF”.

2-1. Select “A-CANCEL”.

3-1. Press the [ ] or [ ] button to select “ON”

or “OFF”.

Capital letters ➜ Numbers ➜ Symbols ➜

Capital letters…

• ON:

3-5. Press the [ ] or [ ] button to select the

Use with connected AMP.

desired character.

• OFF:

Use with inside AMP.

3-6. Repeat step 3-3 to 3-5 to enter up to 30

characters for message.

●Performing a system check

This function allows you to perform a system

check from the adjust mode when required.

3-7. Press and hold the [ ] button (2 sec.) to

store the message in memory.

∗ Press and hold the [BND] button (1 sec.) to

cancel the input message. Then press and

hold the the [ ] button (2 sec.) to store the

message and the message return to default

setting.

2-1. Select “SYSTEM CHECK”.

3-1. Press and hold the [ ] button (1 sec.).

“SYSTEM CHECK” appears in the display,

then the unit returns to the previous

operation mode.

●Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA/AAC

title.

∗ The factory default setting is “ON”.

2-1. Select “SCROLL”.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer,

Radio stations. The number of titles that can be

entered for each mode are as follows.

3-1. Press the [ ] or [ ] button to select “ON”

or “OFF”.

• ON:

Mode

Number of titles

50 titles

To scroll automatically.

CD mode

Radio mode

• OFF:

To scroll just 1 time.

30 titles

CD changer mode

Number of titles

∗ When you want to see the title again, in the

title mode, press and hold the [DISP] button

for 3 seconds or longer to scroll the title.

DCZ625 connected

100 titles

●Setting the dimmer control

You can set the dimmer control “ON” or “OFF”.

∗ The factory default setting is “ON”.

2-1. Select “DIMMER”.

3-1. Press the [ ] or [ ] button to select “ON”

or “OFF”.

1. Press the [SRC] button to select the mode

you want to enter a title (Radio, CD, CD

changer).

2. Select and play a CD in the CD changer or

Radio for which you want to enter the title.

3. Press and hold the [DISP] button (1 sec.).

4. Press the [x] or [v] button to select

“TITLE INPUT”.

●Anti-theft indicator

The red Anti-theft indicator is a function for

preventing theft. When the ACC is off, this

indicator blinks.

∗ The factory default setting is “OFF”.

2-1. Select “BLINKLED”.

5. Press the [ ] button.

The display switches to the title input display.

6. Press the [x] or [v] button to move the

cursor.

3-1. Press the [ ] or [ ] button to select “ON”

or “OFF”.

7. Press the [BND] button to select a character

type. Each time you press the [BND] button,

the character type changes in the following

order:

Capital letters ➜ Numbers ➜ Symbols ➜

Capital letters…

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Common to Each Mode

8. Press the [ ] or [ ] button to select the

desired character.

9. Repeat steps 6 to 8 to enter up to 10

characters for the title.

10.Press and hold the [ ] button (2 sec.) to

store the title into memory.

Clearing titles

1. Select and play a CD in the CD changer or

tune in to Radio for which you want to clear

the title.

2. Press and hold the [DISP] button (1 sec.).

3. Press the [x] or [v] button to select

“TITLE INPUT”.

4. Press the [ ] button.

The display switches to the title input display.

5. Press and hold the [BND] button (1 sec.).

All characters in the title disappear.

6. Press and hold the [ ] button (2 sec.) to

store the setting.

AUX function

This system has an external input jack on the

front panel so you can listen to sounds and

music from external devices connected to this

unit.

●Selecting AUX IN sensitivity

Make the following settings to select the

sensitivity when sounds from external devices

connected to this unit are difficult to hear even

after adjusting the volume.

∗ The factory default setting is “MID”.

1. Press and hold the [DISP] button (1 sec.).

2. Select “AUX SENS”.

3. Press the [ ] or [ ] button to select

“HIGH”, “MID” or “LOW”.

Note:

• When AUX mode is selected, AUX IN sensitivity

can be set.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

7. ACCESSORIES

USB/MTP Operations

through a USB hub device are also not

supported.

USB memory/MTP device operation

Note:

•

When a USB memory device is composed of

two or more drives, only one of the drives will

be detected.

• The following operations are the same as for CD

mode:

∗Pause

• USB memory devices with security functions

cannot be played.

∗Track selection

∗Fast-forward/fast-backward (Except DRM file)

∗Top function

∗List search

∗Scan play

• The order in which tracks are recorded may

differ depending on the USB memory device

connected (the actual playback order may not

be the same as that indicated on your

computer’s display).

∗Repeat play

∗Random play

• If you continuously operate folder up/down,

the play time keeps as “00:00”, and the sound

is not emitted.

∗Folder selection

See “CD/MP3/WMA/AAC Operations” (page 15-

17) for details.

About USB Digital Media Streaming

About USB memory

This unit supports USB Digital Media Streaming.

USB Digital Media Streaming is a function used

to play music files transmitted using Media

Transfer Protocol (MTP). This function also

supports the playback of WMDRM 10 files.

• USB is an acronym for Universal Serial Bus,

and refers to an external bus standard

supporting data transfer rates of 12 Mbps.

• This unit is compatible with USB 1.1/2.0 with

maximum data transfer rates of 12 Mbps.

During USB Digital Media Streaming, the unit

displays the “MTP” mode.

Use of USB Digital Media Streaming requires

the purchase of a supported portable audio

player. For information regarding supported

portable audio players, consult your nearest

Clarion dealer, or visit Clarion’s website.

• USB memory devices that can be played by

connecting to the unit’s USB cable are limited

to those recognized as “USB mass storage

class devices”; operation is not guaranteed

with all USB memory devices.

∗ Devices compatible with “USB Mass Storage

Class” can be used merely by connecting to

the host device, without need for special

drivers or application software.

CAUTION

• Consult the manufacturer of your USB

memory device for information regarding

whether it is supported by “USB Mass

Storage Class” standards.

• Insert and remove a USB memory/MTP

device only when the device is not being

accessed. Connecting or disconnecting

the device at the following times may

result in the loss of data:

• Audio files playable on this unit are limited to

MP3/WMA/AAC files. For details, see the

section “MP3/WMA/AAC” (page 15).

Copy-protected WMA/AAC files cannot be

played on this unit.

- If the USB memory/MTP device is

removed or power is disconnected

during writing to the device.

• The Podcast files of iTunes Store that stored

in the USB memory device can not be played.

Besides, the data that edit through some softs

such as the Tag edit soft may not be played.

• To prevent the accidental loss of data, always

back up important data on your computer.

- When the device is subjected to static

electricity or electric noise.

• Do not leave a USB memory/MTP device

unattended in an automobile. Exposure to

direct sunlight or high temperatures may

cause deformation or other malfunction of

the USB memory/MTP device.

• This unit does not support connections to a

computer. In addition, connections made

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

USB/MTP Operations

• Do not turn on vehicle ignition when the

MTP device is connected, since it may

result in loss or damage to data on the

MTP device. Connect the MTP device to

the USB cable after vehicle ignition is

turned on.

To listen to tracks on a connected

USB memory/MTP device

1. Press the [SRC] button to switch the source.

When USB memory/MTP device is selected,

playback (except DRM files) will begin from

the location at which playback was

previously stopped.

Connecting a USB memory/MTP

device

1. Connect the USB memory/MTP device to the

USB cable.

∗ When a USB memory/MTP device is

connected the USB/MTP mode will be

displayed.

∗ When a USB memory/MTP device is

disconnected and then reconnected, playback

will begin from the beginning of the USB

memory/MTP device.

Playback will begin from the first file

recorded on the device.

∗ If the device is not recognized, press the

[SRC] button to switch the source to the

device.

∗ When “MTP” mode is selected, AAC files on

the MTP device cannot be played.

∗ Always insert the device fully into the

connector. Incomplete connections may

cause the device not to be recognized.

∗ Depending on the number of tracks recorded,

some amount of time may be required until all

tracks are read into the unit.

To stop play

1. Press the [SRC] button and switch the

function to a source other than the USB

memory.

∗ The order in which tracks are recorded may

differ depending on the device connected (the

actual playback order may not be the same as

that indicated on your computer’s display).

CAUTION

Do not remove the USB memory/MTP device

when the USB/MTP mode is selected, since it

may result in loss or damage to data on the

USB memory/MTP device.

Always backup and save important data on

your computer.

2. Remove the USB memory/MTP device from

the USB cable.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Operations

This section describes operations when

connected to an Apple iPod via the USB cable.

Setting iPod simple mode

Use this function if you wish to operate through

your iPod connected to this unit via the USB

cable.

∗ The factory default setting is “OFF”.

1. Press and hold the [DISP] button (1 sec.).

2. Press [x] or [v] to select “S-CTRL”.

Notes:

• See the iPod Owner’s Manual for details

regarding operation conditions.

• The unit will not operate, or may operate

improperly with unsupported versions.

• For a list of compatible Apple iPod unit with the

this model, please contact your Clarion dealer or

www.clarion.com.

3. Press the [ ] button.

4. Press the [ ] or [ ] button to select “ON”

• “Made for iPod” means that an electronic

accessory has been designed to connect

specifically to iPod and has been certified by the

developer to meet Apple performance

standards.

Apple is not responsible for the operation of this

device or its compliance with safety and

regulatory standards.

or “OFF”.

• ON: Operations can be made through your

iPod.

• OFF: Operations cannot be made through

your iPod.

5. Press and hold the [ ] button (1 sec.) to

store the setting and return to the previous

mode.

iPod and iTunes are trademarks of Apple Inc.,

registered in the U.S. and other countries.

Notes:

• When performing iPod operations using simple

control mode, make the operations slowly. If

repetitive operations are performed too quickly,

unforseen errors may occur.

Connecting an iPod

When an iPod is connected to the USB slot,

“Shuffle” set on the iPod will become as follows:

• When performing iPod operations using simple

control mode, please do not operate the iPod

and the unit at the same time, otherwise there

may be unexpeted event happened.

• Some iPod models do not support this function.

Consult your nearest Clarion dealer or website to

confirm which models do not support this

function.

• “Shuffle (Albums)” play ➜ Random play

• “Shuffle (Songs)” play ➜ All random play

The iPod has two modes, the “Play mode” and

the “iPod menu mode” for selecting tracks.

Switch between these modes by pressing the

[BND] button (1 sec.).

Note:

• To connect iPod, please use the USB cable

attached in iPod.

Other various play functions

(in Play mode)

Notes:

Select iPod mode

1. Press the [SRC] button.

• These functions are not supported when in the

iPod menu mode.

Playback will begin from the last file that was

played on the iPod.

• The Random function set on the iPod remains the

same after attachment/detachment of the iPod.

• The Repeat function on the iPod will be changed

when you connect/disconnect the iPod to the

unit.

Notes:

• The following operations in Play mode operate

the same as in CD mode:

∗Track selection: [x], [v]

●Repeat play

Play back one track repeatedly.

∗Fast-forward/fast-reverse: [x], [v]

∗Pause: [

]

1. Press the [RPT] button.

See “CD/MP3/WMA/AAC Operations” (page 15-

17) for details.

• After a Podcast file has completed playback, the

pause display, or the track-end position Play-

Time display will appear. At that time, select a

music file once again.

●Random play

Play all albums within a selected category, in

random order. (Corresponds to “Shuffle

(Albums)” command on iPod.)

1. Press the [RDM] button.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Operations

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

∗ Subfolders may be displayed, depending on

the category.

●All random play

Play all tracks within a selected category, in

random order. (Corresponds to “Shuffle

(Songs)” command on iPod.)

1. Press and hold the [RDM] button (1 sec.).

In this case, use the [ ] and [ ] buttons to

switch between subfolders, then use the [v]

button to select the desired subfolder.

●To cancel play

1. Press the same play button once again.

Notes:

∗ When the track name display is showing,

pressing the [x] button will return to the

currently playing folder name display.

• When the repeat play mode is canceled, after

play all tracks within a selected category,

playback will begin from the first track in the

selected category.

• When playing the last track within a selected

category in Random mode, if ACC is switched off

then on again, playback will begin from a

different track.

• Though the default setting of an iPod is “All

Repeat”, the indication on the mode status is not

displayed.

• When performing operations using simple control

mode, do not set the repeat off on the iPod.

5. Use the [ ] and [ ] buttons to select a

track within a category.

iPod menu alphabet search

This function searches the subfolders for

desired alphabetical letters.

1. Press the [BND] button to select the iPod

menu mode.

2. Press the [ ] or [ ] button to switch

between categories.

3. Press the [v] button.

Selecting category from the iPod

1. Press the [BND] button (1 sec.) to select the

iPod menu mode.

∗ Subfolders may be displayed, depending on

the category. In this case, you can use the

[

] or [ ] button to switch between

subfolders and use the [v] button to enter

the next subfolder layer.

The iPod menu categories will be displayed.

Notes:

• Repeat and Random mode operations are not

supported when in the iPod menu mode.

4. Press and hold the [DISP] button (1 sec.).

5. Press the [ ] or [ ] button to select the

desired letter to search.

6. Press the [DISP] button to perform search.

∗ During search, press the [DISP] button to

cancel search.

• In iPod menu mode, if you press the [x]/[v]

or [ ] / [ ] button fast, playback may not be

performed.

2. Press the [ ] or [ ] button to switch

between categories.

Selecting category using preset

memory

The iPod menu categories alternate in the

1. Press and hold the [BND] button (1 sec.) to

select the iPod menu mode.

following order:

“PLAYLISTS” ↔ “ARTISTS” ↔ “ALBUMS”

↔ “SONGS” ↔ “GENRES” ↔

“COMPOSERS”...

The category can be set as follows in the

[DIRECT] (1-6) buttons.

Note:

[1] : PLAYLISTS

[2] : ARTISTS

[3] : ALBUMS

[4] : SONGS

The iPod menu mode can be canceled by

performing one of the following operations:

• Press the [BND] button.

• When the category select screen is displayed,

press the [v] button.

3. Press the [v] button to select the category.

4. When the track name display is showing,

press the [v] button.

[5] : GENRES

[6] : COMPOSERS

2. Press the desired [DIRECT] (1-6) button to

select the category.

∗ Subfolders may be displayed, depending on

the category.

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Operations

In this case, use the [ ] and [ ] buttons to

switch between subfolders, then use the [v]

button to select the desired subfolder.

3. When the track name display is showing,

press the [v] button.

Playback will begin from the first track in the

selected category, and the iPod menu mode

will be canceled.

∗ Use the [ ] and [ ] buttons to select a

track within a category.

iPod menu list back

In the iPod menu operation mode:

If press the [BND] button, it will return to the

previous subfolder list mode.

If press and hold the [BND] button (1 sec.), it will

return to the category list mode.

About title display

This unit supports the display of title information

transmitted from a connected iPod.

• Character code information is UTF-8;

displayable characters include English

alphanumerics, some symbols, and some

umlaut characters.

• Unsupported characters will be replaced by

asterisks (*).

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Satellite Radio Operations

This function is available when a Satellite Radio

Receiver is connected through the CeNET

cable.

Confirming your SIRIUS ID

1. Press the [x] or [v] button to switch to

channel 0.

This unit can control the following satellite radio

receivers:

2. Press the [DISP] button until the SIRIUS ID

appears in the diaplay.

• XM Satellite Interface Adapter (Mini-Tuner

Included) : CNP2000UC

Clarion cable for CNP2000UC : CNPCLA1

Displaying channel labels

1. Press the [DISP] button to select the desired

channel label.

• SIRIUS Satellite Radio Receiver : SIRCL3

• SIRIUS Satellite Translator Adapter :

CLA-SC1 (which needs Sirius universal Tuner

sold separately.)

Channel ➜ Category ➜ Title (Artist) ➜ Radio

text ➜ Channel...

Notes:

Channel selection

• When the function is differ depending to the

connected receiver, they are distinguished by

the following notations:

“XM”: for an XM Satellite Radio Receiver

“SIRIUS”: for a SIRIUS Satellite Radio Receiver

• XM and the XM logos are trademarks of XM

Satellite Radio Inc.

1. Channels are selected with the [x] or

[v] button.

∗ For details, see the following operation

descriptions.

Note:

• The audio output is muted and other button

operations are not accepted during channel

selection.

Selecting a Satellite Radio mode

1. Press the [SRC] button.

Tuning mode

There are two channel selection modes: quick

tuning mode and step tuning mode.

The system changes to the specified

Satellite Radio mode.

● Quick tuning

Selecting a band

1. Press and hold the [x] or [v] button

1. Press the [BND] button to select a band.

This changes the reception band as follows:

•XM: XM1 ➜ XM2 ➜ XM3 ➜ XM1 ...

•SIRIUS: SR1 ➜ SR2 ➜ SR3 ➜ SR1 ...

(1 sec.).

● Step tuning

1. Press the [x] or [v] button.

● Information displayed during reception

The following information is displayed when the

satellite radio cannot be received normally.

Recalling a preset station

A total of 18 satellite radio stations can be

stored.

•

When the receiver is turned on the first time

or after a reset: “UPDATING”

• XM: 6-XM1, 6-XM2 and 6-XM3

• SIRIUS: 6-SR1, 6-SR2 and 6-SR3

•

When a channel is being tuned in (no signal is

yet received):

This allows you to store your favorite satellite

radio stations in memory for later recall.

XM: “LOADING”, SIRIUS: “LINKING”

1. Press the [BND] button to select the desired

band.

• A channel without a broadcast has been

selected:

2. Press the [ ] / [ ] button or [DIRECT]

button to select the desired preset station.

XM: “– – – CH”, SIRIUS: “INVALID CH”

• A channel not covered by your contract:

XM: “UPDATING”, SIRIUS: “CALL 888” ↔

“539-SIRI” (alternated)

CZ509

Download from Www.Somanuals.com. All Manuals Search And Download.

Satellite Radio Operations

Notes:

Preset memory

• When the name of a channel stored in memory is

changed by a broadcasting channel, the display

may show a channel name that differs from the

stored name.

• A channel stored in memory may be

discontinued at the option of the broadcasting

channel.

• If no operation is performed for more than 1

second, category seek tuning can automatically

tune in a receivable broadcast channel category.

1. Press the [BND] button to select the desired

band.

2. Select the desired channel with quick tuning

or step tuning.

3. Press and hold the [DIRECT] button (2 sec.)

to store the current channel into preset

memory.

Receiving stations selected by