TM
AutoMax 200C/130C
Please read these instructions before use.
Do not discard: keep for future reference.
Quality Office Products Since 1917
Download from Www.Somanuals.com. All Manuals Search And Download.
CAPABILITIES
SHRED THROUGH AUTO FEED TRAY
SHRED THROUGH MANUAL FEED SLOT
200C
200C
Credit cards
A4 paper
Staples
Paper clips
Folded paper
CD/DVD
Up to 20 Sheets Clipped –
Pull apart clipped stacks of
paper containing more than
20 sheets
Junk mail
Up to 20 Sheets Stapled –
Pull apart stapled stacks of
paper containing more than
20 sheets
SHRED THROUGH MANUAL FEED SLOT
SHRED THROUGH AUTO FEED TRAY
130C
130C
A4 paper
Staples
Paper clips
Credit cards
Folded paper
Up to 20 Sheets Clipped –
Pull apart clipped stacks of
paper containing more than
20 sheets
Up to 20 Sheets Stapled –
Pull apart stapled stacks of
paper containing more than
20 sheets
Will not shred: Adhesive labels, continuous form paper, folded paper (Autofeed), bound
Maximum:
documents, magazines, transparencies, newspaper, cardboard, binder clips, industrial staples,
large paper clips, more than 20 pages stapled or paper clipped together, staples in top center of
paper, laminates, 3½ in. Floppies, file folders, X-rays or plastic other than noted above
Auto Feed Sheets Capacity (200C).............................................................................. 200*
Auto Feed Sheets Capacity (130C).............................................................................. 130*
Manual Feed Sheets Capacity (200C) ........................................................................... 10*
Manual Feed Sheets Capacity (130C) ............................................................................. 8*
*A4 (70 g) paper at 220-240V, 50/60 Hz, 2.0Amps (200C), 2.0Amps (130C); heavier paper,
humidity or other than rated voltage may reduce capacity.
Paper shred size:
Cross-Cut (200C) ..........................................................................................4mm x 38mm
Cross-Cut (130C) ..........................................................................................4mm x 50mm
BASIC SHREDDING OPERATION
AUTO FEED
* Do not open lid once shred cycle has started.
1
2
4
3
200C
130C
Continuous operation:
Continuous operation:
Add paper. Paper should
be flat and aligned
Plug in and put
Open lid
Close lid and press start
12-minute maximum
10-minute maximum
disconnect power
(
) to begin shredding
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
12-minutes will trigger
NOTE: Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
10-minutes will trigger
with front of paper tray.
switch in ON (I) position
MANUAL FEED
1
25-minute cool down period.
25-minute cool down period.
3
2
or
Plug in and put
Feed paper straight into
paper entry and release
Hold CD (200C only)/Card
at edge, feed straight into
paper entry and release
disconnect power
switch in ON (I) position
Note: Manual feed cannot be used while Auto Feed in use.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
ADvANCED PRODUCT FEATURES
Energy Saving Sleep Mode
Feature shuts down the shredder
after 2 minutes of inactivity
SilentShred™ Technology
SilentShred™ noise quality
shreds without noisy disruptions.
SLEEP MODE OPERATION
Feature shuts down the shredder after 2 minutes
of inactivity
WHEN IN SLEEP MODE
1
2
To get out of sleep mode, or
open lid and load paper
Insert paper
For more information about all of Fellowes Advanced Product Features go to www.fellowes.com
PRODUCT MAINTENANCE
OILING SHREDDER
All cross-cut shredders require oil for peak performance. If not oiled, a
machine may experience diminished sheet capacity, intrusive noise when
shredding, and could ultimately stop running. To avoid these problems, we
recommend you oil your shredder each time you empty your waste bin.
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors
may become blocked by paper dust causing the motor to run even if there is no paper present.
(Note: the paper detection sensors is located in the center of the paper entry).
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
TO CLEAN THE SENSORS
3
1
1
2
2
3
5
4
*Carefully apply oil
Close lid. Press and
Turn off and unplug
shredder
Locate Auto-start
infrared sensor
Dip cotton swab in
rubbing alcohol
Using cotton swab,
wipe away any
contamination from
the paper sensors
Open lid
Open lid
across cutters (do not hold forward (
)
get oil in paper tray) 2-3 seconds
*Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
TROUBLESHOOTING
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This indicator
will remain illuminated and the shredder will not operate for the duration of the recovery time.
Remove Paper: When illuminated, press reverse ( ); open lid and remove paper.
Bin Full: When illuminated, the shredder waste bin is full and needs to be emptied. Use Fellowes waste bag 36053.
Bin Open: The shredder will not run if the bin is open. When illuminated, close the bin to resume shredding.
* Shredder will not run when lid is open.
MISALIGNED PAPER
1
2
If paper is not shredding
through auto feed tray,
check position of paper.
Paper should be flat and
aligned with front of
paper tray.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED PRODUCT WARRANTY
200C
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of additional costs incurred by Fellowes to provide parts or services outside of the country where the
defects in material and workmanship and provides service and support for 2 years from the date shredder is initially sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF
of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
be free from defects in material and workmanship for 7 years from the date of purchase by the TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable
original consumer. If any part is found to be defective during the warranty period, your sole and for any consequential or incidental damages attributable to this product. This warranty gives you
exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide,
part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product except where different limitations, restrictions, or conditions may be required by local law. For
usage standards, shredder operation using an improper power supply (other than listed on the more details or to obtain service under this warranty, please contact us or your dealer.
label), or unauthorized repair. Fellowes reserves the right to charge the consumers for any
130C
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of additional costs incurred by Fellowes to provide parts or services outside of the country where the
defects in material and workmanship and provides service and support for 2 years from the date shredder is initially sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF
of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
be free from defects in material and workmanship for 5 years from the date of purchase by the TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable
original consumer. If any part is found to be defective during the warranty period, your sole and for any consequential or incidental damages attributable to this product. This warranty gives you
exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide,
part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product except where different limitations, restrictions, or conditions may be required by local law. For
usage standards, shredder operation using an improper power supply (other than listed on the more details or to obtain service under this warranty, please contact us or your dealer.
label), or unauthorized repair. Fellowes reserves the right to charge the consumers for any
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to the shredder.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
AutoMax 200C/130C
Declaration of Conformity
Fellowes Manufacturing Company
Yorkshire Way, West Moor Park, Doncaster, South Yorkshire, DN3 3FB, England declares that the product Models 200C/130C conform with the requirements of the Restriction of Hazardous Substances
Directive (2011/65/EC), the Low Voltage Directive (2006/95/EC), the Electromagnetic Compatibility Directive (2004/108/EC), the WEEE directive (2012/19/EU), and below harmonized European
EN Standards.
Safety: EN 60950-1(2nd edition)
EMC Standard: EN55014-1
Year Affixed: 14
EN55014-2
EN61000-3-2
EN61000-3-3
Itasca, Illinois, USA
July 1, 2014
James Fellowes
W.E.E.E.
This product is classified as Electrical and Electronic Equipment. Should the time come for you to dispose of this product please ensure that you do so in accordance with the European Waste of Electrical
and Electronic Equipment (WEEE) Directive and in compliance with local laws relating to this directive.
For more information on the WEEE Directive please visit www.fellowesinternational.com/WEEE
Questions or Concerns?
Customer Service & Support
Troubleshooting
Troubleshooting
Registration
Replacement parts
General questions
Manuals
Australia
Europe
+1-800-33-11-77
00-800-1810-1810
+44-(0)-1302-836800
+1-800-955-0959
United Kingdom
United States
©2014 Fellowes, Inc. Part No. 408399 Rev C
Download from Www.Somanuals.com. All Manuals Search And Download.
|