Steam Cleaner
with Soap Dispenser
OWNER’S MANUAL
Model EP923H
120V., 60 Hz, 1550 Watts
EURO-PRO Operating LLC
94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel.: 1 (800) 798-7398
Download from Www.Somanuals.com. All Manuals Search And Download.
Model EP923H
IMPORTANT SAFETY INSTRUCTIONS
When using your Steam Cleaner with Soap Dispenser, basic safety
precautions should always be observed, including the following:
1 YEAR LIMITED WARRANTY
Your Steam Cleaner is warranted to be free from defects in material and workmanship for a period
of one (1) year from the date of purchase when utilized for normal household use by the original
purchaser only. The included Warranty Registration Card must be filled out and returned within 10
days of purchase. This is essential for your Warranty to be effective should any problem arise with
this product.
To reduce the risk of fire, electric shock, or
injury:
•
1. Read all instructions before using your
steam cleaner.
Do not leave the steam cleaner plugged
in when unattended. Unplug the electrical
cord when not in use and before servicing or
refilling water tank.
2. Use the system only for its intended use.
3. To protect against a risk of electric shock,
do not immerse any part of the system in
water or other liquids.
•
•
•
Do not allow to be used as a toy. Close
attention is necessary when used by or near
children, pets or plants.
Use only as described in this manual. Use
only manufacturer’s recommended
accessories.
Do not pull cord, use cord as a handle, close
a door on cord, or pull cord around sharp
edges or corners. Keep cord away from
heated surfaces.
Do not use extension cords or outlets with
inadequate current carrying capacity.
Do turn off all controls as applicable before
unplugging from electrical outlet.
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
Do not handle plug or steam cleaner with wet
hands or operate without shoes.
Do not put any objects into openings. Do not
use with any opening blocked.
ALWAYS STORE YOUR APPLIANCE
INDOORS in a cool, dry area.
4. Never yank cord to disconnect from
outlet; instead, grasp plug and pull to
disconnect.
Should any defect covered by the terms of the limited warranty be discovered within one year,
EURO-PRO Operating LLC will repair or replace any defective part provided the unit is returned
by the original purchaser, freight prepaid, to:
5. Do not allow cord to touch hot surfaces.
Let the system cool completely before
putting away or opening water tank
(removing the safety cap). Wrap cord
loosely around system when storing.
6. Always disconnect system from electrical
outlet when filling with water or emptying
and when not in use. Always turn the
safety cap slowly when opening the water
tank . This will allow any remaining steam
to escape gradually.
7. Do not operate the system with a damaged
cord or plug, or if the appliance or any other
part of the system has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble or attempt to
repair the steam cleaner. Return the
system to EURO-PRO Operating LLC (see
warranty) for examination and repair.
Incorrect re-assembly or repair can cause a
risk of electrical shock or injury to persons
when the steam cleaner is used.
8. Close supervision is necessary for any
appliance being used by or near children.
Do not leave the system unattended while
connected to electrical outlet or when hot.
9. Burns can occur from touching hot metal
parts, hot water or steam. Use caution
when draining unit after use as there may
be hot water in the unit. Never direct steam
at any person. The steam is very hot and
can cause burns.
10. Do not operate in the presence of
explosive and/or flammable fumes.
11. This appliance is intended only for
household use. Follow all user instructions
in this manual.
US:
EURO-PRO Operating LLC, 94 Main Mill Street, Door, 16, Plattsburgh, N.Y. 12901
Proof of purchase date and $15.95 for handling and return packing/shipping charges must be
included.*
The liability of under this warranty is limited solely to the cost of the replacement parts or the
complete unit at our option. LABOUR CHARGES ARE NOT INCLUDED.
This warranty does not cover normal wear of parts and does not apply to any unit that has been
tampered with or used for commercial purposes. This Limited Warranty does not cover damage
caused by misuse, negligent handling, or damage due to faulty packaging or mishandling in transit
(by any common carrier).
•
•
•
•
•
•
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC, if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some States/Provinces do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights which vary from state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to attach tag to item before
packing with your name, complete address and phone number with note giving purchase
information, model number and what you believe is the problem with item. We recommend you
insure the package (as damage in shipping is not covered by your warranty). Mark the outside of
your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our
products, therefore the specifications contained herein are subject to change without
notice.
•
•
Do keep your work area well lit.
Do Not turn the appliance over or on its
side. Never direct steam towards people,
animals or plants.
Do not immerse the steam cleaner into water
or other liquids. Always unplug the power
cord from the electrical socket when filling the
steam cleaner.
Do NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe for
use. Use tap water or distilled/purified
water if the tap water in your area is very hard.
•
•
OWNERSHIP REGISTRATION CARD
Please complete and return within ten (10) days of purchase. The registration will enable us to
contact you in the event a product defect is discovered. By returning this card you acknowledge
to have read and understood the instructions for use, and warnings set forth in the accompanying
instructions.
RETURN TO: EURO-PRO Operating LLC, 94 Main Mill Street, Door 16, Plattsburgh, N.Y. 12901
PURCHASER: ……………………………………..…………………………………………………
ADDRESS: ………………………………………...……………………………………………….
CITY: ……………………………….. STATE…………………………………………………….
12. Never use any chemicals or substance
other than tap water in the machine. Use of
chemicals may damage the machine. Use
of chemicals will automatically void your
warranty.
EP923H
DATE OF PURCHASE: ……………………… MODEL:..…………………………………….
SAVE THESE INSTRUCTIONS
NAME AND ADDRESS OF DEALER: …………………………………………………………..
For Household Use Only
1
Rev. 10/04 RW2
Printed in Turkey
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
ADDITIONAL IMPORTANT SAFEGUARDS
Artificial Plants
Hints
1. To avoid circuit overload, do not operate another appliance on the same socket
(circuit) as the steam cleaner.
2. If an extension cord is absolutely necessary, an extension cord rated a minimum
of 15 ampere, 14 gage cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange cord so that it cannot be pulled or
tripped over.
Use the concentrator without a brush
attached to blow off the dust and dirt.
ALWAYS FINISH CLEANING BY WIPING
DOWN THE CLEANED SURFACE WITH A
TOWEL
Clothing
A vapor cleaning system is excellent for
removing wrinkles from fabrics. Simply
“vaporize” the surface from a distance
(12”-18”) The dry vapor removes
wrinkles without leaving the fabric wet
like ordinary fabric steamers do. Always
test a hidden section of the clothing for
color fastness.
The steam cleaner has many uses that
have not been mentioned. This was
meant only to give you a general idea of
what can be achieved with the unit.
However, the ways in which to use the
attachments and brushes are in most
cases universal. It is most helpful to
always have a terry cloth towel or paper
towel ready to use for removal of
moisture and residue. 100% white
cotton towels work best.
You can clean the brushes with your
steam cleaner. To clean the triangle
brush, hold at one end and use the
concentrator to simply blow off dirt into
the garbage can. When cleaning the
bristle brushes, use a pair of pliers to
hold and blow dirt as above or place in
the basket of your dishwasher.
3. Do not leave unattended when the system is connected to a power
supply/electrical outlet.
WARNING: This appliance is equipped with a grounded,
type 3-wire cord (3-prong plug). This plug will only fit into an
electrical outlet made for a 3-prong plug. This is a safety
feature. If the plug should fail to fit the outlet, contact an
electrician to replace the outlet. Do not attempt to defeat the
safety purpose of the grounding pin, part of the 3-prong plug.
Nicotine and Tar
Nicotine and tar dissolves at high
temperatures and becomes a light
yellow oil that has the consistency of
sewing machine oil. When the
nicotine/tar film is touched by a hot terry
cloth towel clipped over the floor brush,
it immediately dissolves and flows into
the towel. You can remove it from flat
surfaces as fast as you can move the
brush over the surface.
CAUTION: Always drain condensed water from hose
before use or if unit has been left idle for a period of time. To
drain hose, direct nozzle into an appropriate container or sink
and depress hand grip steam trigger. Once hose has been
drained, normal use may be resumed. Never direct nozzle
towards people, animals or plants.
Removing Wax, Tar, Etc.
Many stains are only stuck on the
surface of materials and can be easily
and quickly removed by “blowing”
excess material away from the surface
from the side. This is accomplished by
using the concentrator. Hold the terry
cloth towel to the side to catch the loose
residue as it is blown by the
Note: Wipe with a towel immediately
before the cleaned area dries. When
cleaning the oven, use the nylon bristle
brush to clean around the elements and
drip trays. Use the nylon bristle brush
for cracks, crevices, and hard to reach
areas.
IMPORTANT SAFEGUARDS FOR SOAP SOLUTION
Refrigerator - Use the concentrator to
blow away dirt in the ice machine and
on door seals. The vapor will not dry
out or crack the seals as chemicals
often do. Can openers and other
kitchen equipment can be easily
cleaned with the detail brush to get into
all the nooks and crannies. Mold stains
around door gaskets can be removed
with the detail brush.
To clean microwaves or other small
appliances use the detail brush for
small areas.
Note: When cleaning small electrical
appliances always unplug them from
outlet before cleaning. DO NOT direct
steam into any openings of the
concentrator. Note: Always vacuum
any loose residue off the surface before
you apply vapor to it.
CAUTION: Eye Irritant. Should some of the cleaner be
rubbed or splashed into the eyes, wash out thoroughly with
water. If irritation continues, contact a physician. In case of
ingestion, contact a physician.
Ingredients: Anionic and non-ionic surfactant system
WARNING: Use only the soap solution that has been
supplied with your steam cleaner. Use of any other detergent
soaps may damage the pump mechanism and the feed
system of the dispenser. Regular soap should never be used
with this dispenser.
WARNING: NEVER ADD THE SOAP SOLUTION TO THE
BOILER OF THE STEAM CLEANER.
appliances.
To clean counter tops, use the triangle
brush with a terry cloth towel attached.
For heavily soiled areas, use the brush
without the terry cloth towel first in order
to loosen the debris, then follow with a
terry cloth towel attached to finish.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
GETTING TO KNOW YOUR STEAM CLEANER WITH
SOAP DISPENSER
Note: Soap scum sometimes will develop
Upholstery
a hard surface from waterborne minerals.
If this is the case, use the floor brush with
no towel first to break up this surface - or
spray or wipe first with lemon, vinegar or
seltzer soda water to soften the minerals.
Moving too slowly can dry out the soap
scum and cause it to granulate on the
surface. The surface will have a gritty
feel. If this happens, apply vapor to the
surface with the open brush again and
re-clean.
Use the triangle brush attached directly
to the hand grip with a clean white terry
cloth towel. Use fast, light strokes, avoid
getting the fabric wet. Be patient with
stubborn spots; work on a spot gently for
no more than a minute at a time, then
wait five minutes for the area to dry and
repeat. Use circular movements or back-
and-forth and side-to-side movements to
get all sides of surface fibers then blot
with a towel. Finish with a brushing in
one direction that will give the fabric a
uniform appearance.
Bathroom Areas
To clean the bathtub or shower area, use
the nylon bristle brush for grout, shower
door tracks, hard to get areas and heavily
soiled areas. The dual edge window/tile
squeegee will be the most efficient way
to clean the rest of the area. Allow plenty
of time for the heat to penetrate the
surface. This is especially helpful in the
shower area if there is tile or grout. Wipe
with towel.
CAUTION: Always determine
the color-fastness of any fabric-
especially with reds or blues - by taking a
clean, moist, warm towel and gently
rubbing a small area as far down on the
back or other out of the way place on the
furniture as possible. If color comes off
on the towel, you may need to have the
piece dry cleaned.
Removal of soap scum on tile, grout, and
shower doors is also easier with the
steam cleaner.
Window, Glass Surfaces and Mirrors
Use the dual edge glass and tile
squeegee. Work with the vapor jet on
using the top to bottom movements. Use
the squeegee with the vapor off to clear
the water from the glass. To do this
without leaving streaks, use lateral
movements from the top to the bottom of
the surface.
CAUTION: When cleaning
windows, always avoid any sudden
changes in temperature to prevent glass
breakage or cracks.
Garden Furniture
Use any of the brushes depending on the
surface area. Work quickly when
cleaning resin outdoor furniture. Finish by
wiping with a towel
Blinds
Use the nylon bristle brush to clean
blinds. Move the brush over the surface,
allowing enough time for the vapor to
penetrate. Work quickly on PVC blinds.
Test for color fastness on fabric blinds
before using. Finish by wiping with a
towel.
1. Safety Filler Cap
2. Shoulder Strap
3. Power “On” Light (Red)
4. Steam Ready Light (Green)
5. Flexible Hose
18. Pump Button
19. Soap Dispenser
20. Triangular Brush
21. Wall Paper Scraper
22. Concentrator For Wall Paper Scraper
23. Concentrator
6. Steam Switch
Fiberglass or Stainless Steel Surfaces
Use the triangle brush or nylon bristle
brush. Slowly move the brush over the
surface to be cleaned. The vapor will
emulsify the dirt and grease on the
surface. Follow behind with a terry cloth
towel over the brush to remove excess
moisture and residue.
Automotive
7. Locking Button
8. Power Cord
9. Front Locking Tab
10. Caddy
11. Rear Locking Latch
12. Hand Grip Storage
13. Castors (x4)
14. Extension Tubes (x2)
15. Window Squeegee
16. Steam Pocket Frame
17. Steam Pocket
24. Nylon Bristle Brushes (x2)
25. Brass Bristle Brush
26. Funnel
27. Soap Accessory Adapter
28. Small Pad Base
For detailing the wheels, use the
concentrator and the brass bristle brush.
Exterior windows are cleaned best by
applying the vapor with the concentrator
and following with a paper towel.
To clean bicycles, use the nylon bristle
brush.
To clean equipment, use the bristle
brush, depending on the surface area.
Finish by wiping down with a towel.
29. Large Pad Base
30. Small Scrubbing Pad
31. Large Scrubbing Pad
32. Small Sponge Pad
33. Large Sponge Pad
34. Sample Bottle of Soap (8 oz.)
Tip: An old idea for polishing stainless
steel is to wipe it down with seltzer soda
water after it is cleaned.
Soap Scum
Soap scum dissolves almost immediately
under a combination of heat and
moisture. Rinse the surface with a small
amount of water afterwards or go back
over it once more with a clean terry cloth
towel.
Technical Specifications
Voltage:
120V., 60Hz.
1550 Watts
Power:
Water Capacity:
Steam Generator:
40 US Fl. Oz. (1200 ml.)
Stainless Steel
* Illustrations may differ from actual product.
14
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES OF STEAM CLEANER WITH SOAP
DISPENSER
TIPS ON HOW TO USE YOUR SYSTEM
Wood, Vinyl and Marble Floors
Note: When storing your unit, always
drain any residual water in the boiler
and do not tighten the safety filler cap
onto the unit. Always leave the safety
filler cap loose on the unit when not in
use.
Use the steam pocket. Move the steam
pocket across the floor as if you are
mopping. When one side of the towel is
soiled, turn the steam pocket frame and
use the other side. If you are working
on a very dirty area, you can move the
steam pocket over the area slowly,
several times. If it is a wood floor, move
fast to avoid heat or moisture buildup in
the wood.
To Clean Waxed Floors: Use the
steam pocket with quick strokes. This
will cause the dirt to be removed but not
the wax.
4. Heavy-duty crush-resistant
hose.
1. No more detergents or
chemicals. Just add water.
Water
•
•
Use tap water for all your cleaning
needs.
However, if you live in an area with
hard water, use de-mineralized /
distilled water when steaming light
colored fabrics to eliminate the
possibility of hard water stains.
5. Soap Dispenser
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in
this appliance. Use tap water or
distilled/purified water if the tap
water in your area is very hard.
2. Lightweight & Portable
Vinyl Floors: Do not allow heat to
buildup in any kind of vinyl, since it can
soften it enough to affect its texture.
Work fast on vinyl.
Tile Floors: Use the concentrator with
the nylon bristle brush attached to an
extension. Have the steam pocket
ready as well. Clean the grout between
the tiles with the nylon bristle brush.
Remove the nylon bristle brush and
attach the steam pocket, move the
steam pocket across the floor to clean
the tile and remove excess moisture and
residue. Do not let the area dry before
you wipe with a towel.
6. Versatile, quick-change
accessories
WARNING: A towel wrapped
around the brush can become hot
enough to burn. Make sure that you let
the towel cool off for 5 minutes before
touching it.
Using Towels
•
For best results use 100% cotton
white terry cloth towels.
Use correct size of towel to allow you
to wrap the towel around the brushes
and clip it under the spring loaded
cloth holder.
The purpose of using a towel is to
absorb moisture and dirt being
removed. Always use dry towels.
A wet towel will smear the dirt.
Wash towels with strong detergent
and bleach.
Using scented fabric softener while
washing the towels will cause the
scent to be released into the air
when using the towels with your
steam system.
•
3. Stainless Steel Boiler:
Non-corroding, stainless
steel boiler. Welded
construction.
Spot Cleaning (Carpets)
Use the concentrator with or without the
bristle brush. Move slowly over the soiled
area, allowing the steam to penetrate.
Agitate with bristle brush or clean towel.
Dab the spot with the towel (do not rub).
Repeat as necessary to remove stain.
Vacuum only after the carpet has
completely dried.
Always test color fastness of carpet in an
inconspicuous area before cleaning.
If your steam cleaner fails to remove
stubborn stains a commercially available
carpet shampoo may be required. Do
NOT use the soap supplied for spot
cleaning carpets.
•
7. Multipurpose Steam Cleaner:
Bathrooms, kitchens, living
areas, pet areas and
appliances.
•
•
Automotive, patio and
windows.
Efficient Work
•
For vertical surfaces, wipe with a
towel from the top down, in this
way the dirty water will not soil
surfaces already cleaned.
Avoid changing brushes back and
forth while cleaning.
Start with the smallest brush to
clean tight spots and corners first.
Use a towel to wipe dirt as soon as
possible, otherwise it will dry and re-
adhere to the surface.
Do NOT add cleaning solutions, scented
perfumes, oils or any other chemicals to
the water used in this appliance as this
may damage the unit or make it unsafe
for use.
•
•
•
4
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON HOW TO USE YOUR SYSTEM
OPERATING INSTRUCTIONS
Remove the funnel slowly and let
Components
Water
Care and Maintenance
the remaining water in it to go
inside the water tank. Do Not
Overfill. Replace the Safety
Filler Cap.
Power “On” Light (red): This light will
illuminate when the unit is plugged into
the 120V. wall outlet. This light will cycle
on and off with the steam ready light.
CAUTION: Read the instructions
for “Filling the Water Tank” before
opening the Safety Cap.
•
Use tap water for all your cleaning
needs.
If you consistently use demineralized or
distilled water, cleaning the tank is
unnecessary.
•
However, if you live in an area with
hard water, use de-mineralized /
distilled water when steaming light
colored fabrics to eliminate the
possibility of hard water stains.
WARNING:Allow unit to cool
for 15 minutes before refilling.
When refilling the steam cleaner
while the boiler is still hot, there is
a risk that water will squirt back
during filling and cause scalding.
Extreme care should be taken
when refilling the unit. Use
caution when opening the
Safety/Filler Cap as cap may
become hot during use and
escaping steam can cause
scalding.
Rinsing Out the Steam Cleaner
Normally, a periodic rinse of your steam
cleaner will free it from deposits. This is
recommended every 10-15 tankfulls, to
free up any scale deposits from the tank.
Fill the boiler with 20 oz. of water and
shake the cleaner vigorously. Tilt the
cleaner upside down to empty the boiler of
water and any scale deposits.
CAUTION: Always unplug
before filling. ALLOW UNIT TO
COOL FOR FIFTEEN (15)
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the water used in
this appliance. Use tap water or
distilled/purified water if the tap
water in your area is very hard.
MINUTES BEFORE REFILLING.
IMPORTANT: Do NOT add cleaning
solutions, scented perfumes, oils or any
other chemicals to the boiler in this
appliance. Use tap water or
distilled/purified water if the tap water
in your area is very hard.
Descaling Your Steam Cleaner
If the tap water in you area contains a high
level of calcium deposits and you have
been using tap water to do your steam
cleaning, you should descale your unit
after 10-15 tankfulls.
Efficient Work
•
For vertical surfaces, wipe with a
towel from the top down, in this
way the dirty water will not soil
surfaces already cleaned.
Step 6: Connect desired attachments
onto the Flexible Steam Hose.
Step 7: Plug the unit into a standard (120
volt, grounded) wall receptacle.
Allow approximately 8-10 minutes
for vapor to reach its working
temperature and pressure. The
green ready light will illuminate
when the unit is ready for use.
Always point nozzle outlet in a safe
direction.
Filling or Refilling Your Steam
Cleaner With Water
•
•
•
Avoid changing brushes back and
forth while cleaning.
Start with the smallest brush to
clean tight spots and corners first.
Use a towel to wipe dirt as soon as
possible, otherwise it will dry and
re-adhere to the surface.
IMPORTANT: Always insure that the unit
is “UNPLUGGED” from the wall receptacle
prior to initial filling or re-filling the water
tank and has been allowed to cool for 15
minutes. Never attempt to fill this unit
under a water tap, always use the filling
funnel provided.
To Descale the Steam Cleaner
Step 1: Unplug the steam cleaner from
the power source before you
descale the boiler. Allow to cool.
Step 2: Fill the boiler with 1 part
vinegar and 5 parts water and
leave overnight or for a period
of approximately 8 hours. Do
not screw the safety/filler cap
onto the steam cleaner while
you are descaling the boiler.
Do not use the steam cleaner
while descaling solution is
inside the boiler.
Step 1: Before refilling the steam cleaner,
make sure that the unit is NOT
plugged in and has been allowed to
cool for fifteen (15) minutes.
Step 2: Plug the power cord in to an electrical
outlet and press the steam switch on
the hand grip to the “ON” position to
vent of any residual steam that is in
the boiler.
Step 3: Remove the power cord from the
electrical outlet and turn the steam
switch on the hand grip to the “OFF”
position.
Step 4: Place the unit on a flat, stable
surface. Slowly turn the safety filler
cap counter clockwise until it is
removed.
To Order Additional Supplies
NOTE: When the steam cleaner has run
out of water, steam output will
cease.
Note: If you need to order supplies such
as steam pocket towels, soap kits, etc.
please call the customer service number
at 1 (800) 798-7398.
Fig. 1
Step 3: After the period of soaking, turn
the steam cleaner upside down
to empty solution from the
boiler. Due to the fact that a
small amount of solution will be
left in the boiler, it is necessary
to rinse the boiler out with clean
water 2 or 3 times. Your steam
cleaner is now ready for use.
Step 5: Insert the funnel into the tank
opening and add 40 US Fl, Oz.
(1200 ml) of water. (Fig. 1) Place the
funnel in the tank opening as
WARNING:Allow unit to cool
for 15 minutes before refilling.
Use caution when opening the
Safety/Filler Cap as cap may
become hot during use and
escaping steam can cause
scalding.
Note: When storing your unit, always
drain any residual water in the boiler and
do not tighten the safety filler cap onto the
unit. Always leave the safety filler cap
loose on the unit when not in use.
illustrated in Fig. 1. The funnel has
been specially designed to show
when the water tank is full. When
water starts to come out of the vent
hole of the funnel, the tank is full.
12
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
IMPORTANT: When using the
Using Your Steam Cleaner with
Attaching the Steam Pocket
Attaching the Shoulder Strap
steam cleaner with the shoulder
strap, avoid rocking or tilting the unit
excessively as this may cause water
to enter the hose and be discharged
along with the steam.
Steam Pocket
Towel to the Frame
Using the detachable shoulder strap
allows for greater freedom of movement
when both hands are needed for
various cleaning tasks.
To attach the shoulder
strap to the steam
Step 1: Connect one of the extension
tubes to the hand grip on the
flexible steam hose. To
WARNING: Always insure the
unit is “UNPLUGGED” from the
wall receptacle prior to attaching
or removing accessories.
attach the extension tubes
one onto the other or onto the
hand grip, press the locking
button ensuring that it fits into
the hole. (Fig. 2, Fig. 3) To
disconnect, repeat the
operation by pressing the
locking button and pulling the
two sections apart.
Assembling the Caddy
The casters for the caddy for the
steam cleaner are packed and
shipped unassembled. To assemble
the casters to the caddy, simply insert
the caster stem into one of the four (4)
holes in the base and push downward
with the palm of your hand. (Fig. 26)
Repeat for the next three (3) casters.
cleaner, simply snap
the shoulder strap
1. Slide the steam pocket towel over the
steam pocket frame. (Fig. 4)
hooks onto the
connecting
rings on the
unit body.
See Fig. 23, 24 & 25.
Fig. 23
Fig. 4
2. Bring the towel all the way to the top
of the steam pocket frame. (Fig. 5)
Fig. 24
Fig. 26
Attaching the Steam Cleaner
to the Caddy
Fig. 2
Fig. 3
1. After you have inserted the castors
to the base of the caddy, turn the
caddy right side up on a flat, level
surface. Place it with the rear
locking latch to your right.
2. Hold the steam cleaner with the
power cord also to your right.
3. Insert the left side of the steam
cleaner (#1 in the illustration
below) down into the caddy making
sure that it clips into the front
locking tab.
4. Then press down on the right
side of the steam cleaner (#2 in the
illustration below) so that the rear
locking latch locks in place.
(Fig. 27)
NOTE: Fit the steam pocket frame with the
angle adapter onto the extension
tube.
Step 2: If the angle adapter is not attached
to the steam pocket frame, hold the
steam pocket frame your left hand.
With the angle adapter pointing
downward, insert it into the hole of
the steam pocket frame, then turn
the steam pocket frame 180°.
Fig. 5
3. Bring the velcro strips that are on the
back side of the steam pocket towel
over the steam pocket frame and
attach to the inside of the front side of
the steam pocket towel. (Fig. 6)
Fig. 25
Step 3: Insert the electrical power cord
into the wall outlet. Heating time
is approximately 8-10 minutes with
cold water. Filling the steam
generator with hot water will shorten
the heat up time.
NOTE: Do not use the soap injector with
the steam pocket attachment.
Fig. 6
Front
Locking
Tab
Rear
Locking
Latch
Fig. 27
6
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Using the Soap Injector
Care & Maintenance of the Steam
WARNING: Always insure the
Note: The soap solution should only be
used on surfaces that can withstand
the prolonged treatment with high
temperatures and moisture such as
ceramic tiles or counter tops. This
should not be used on materials such
as carpet or wood floors because the
high temperature and steam with soap
can damage the surface.
VERY IMPORTANT: Use only the soap
solution that has been supplied with
your steam cleaner. Use of any other
type of detergent soaps may damage the
pump mechanism and the feed system of
the injector. Regular detergent soaps
SHOULD NEVER BE USED with this
injector.
unit is “UNPLUGGED” from the
wall receptacle prior to attaching
or removing accessories.
Pocket Towel
Fig. 20
Due to the unique cleaning ability of this
cloth, proper care of your microfiber towel is
required to ensure long life and continued
cleaning ability.
• The first thing you should do when you get
a new microfiber towel is to wash and dry
it. During the manufacturing process the
fabric has a tendency to become flat as it
picks up contaminants from the air and
machinery. There will also be a number of
loose threads that, while they cause no
harm, can be annoying the first time you
use the towel.
• To clean the towel, simply wash it in your
washing machine using the warm water
setting.
• Always wash your towels separately from
other fabrics. They have a tendency to
pick up lint and other particles from other
fabrics and the next time you use your
towel, this lint will transfer to the surface
being cleaned.
• ONLY USE LIQUID DETERGENTS, never
use dry detergents as many times the
granules do not fully dissolve and become
trapped in the towel. This can scratch the
surface that you are cleaning.
• NEVER USE BLEACH OR FABRIC
SOFTENERS! Bleach will damage the
microfiber fabric and fabric softeners
deposit a coating on the microfiber fabric
what will not allow the cloth to clean
efficiently.
• Air dry the towel. Do not put in a clothes
dryer as high heat will cause the towel to
shrink and the microfibers to break down.
• If you wash your towel on a regular basis
and don’t let them get too dirty, they will
last much longer. As with any fabric, dirt
particles, grease and other contaminants
can cause the fibers to break down,
therefore regular cleaning will help
preserve your microfiber towels.
Using Your Steam Cleaner with
the Triangular Brush
To attach the triangular brush to the
angle adapter, hold angle adapter in
your right hand and the brush in your
left. Insert the angle adapter into the
triangular brush and turn 180° to lock
in place. (Fig. 7 )
Follow the same procedure as above to
attach the small or the large pad base to
the accessory adapter. Use the small pad
base when using the small scrubbing
pads or sponges or the large pad base
when using the larger scrubbing pads or
sponges. (Fig. 21)
To fix the scrubbing pads and sponges to
the pad bases, press firmly while twisting
slightly. (Fig. 22)
WARNING: KEEP SOAP
SOLUTION OUT OF THE
REACH OF CHILDREN.
CAUTION: DO NOT USE THE
SOAP SOLUTION ON ANY
FABRICS OR TEXTILES.
Fig. 7
Attaching Soap Accessories to
Adapter
Step 1: The triangle brush w/angle
adaptor connects either
directly to the handgrip or
may be used with the
Your steam cleaner comes with a variety
of scrubbing pads, scrubbing sponges
and a soap brush that can only be used
with the soap accessory adapter.
To attach the soap brush to the
accessory adapter, push it into the soap
accessory adapter and turn it counter
clockwise. To lock the soap brush in
place, push the locking button down so
that the pin of the locking button goes into
one of the four (4) holes in the soap
brush. (Fig. 19) To remove the soap
brush, push the locking button up and
turn the brush clockwise to unlock.
(Fig. 20)
extension tubes. To connect
the extension tubes to the
hand grip attach the
extension tubes one onto the
other and then onto the hand
grip. (Fig. 8 & 9) To
disconnect, reverse the
operation by pressing the
locking button and pulling the
two sections apart.
Fig. 21
Fig. 22
Fig. 8
+
=
Locking
Button
Locking
Holes
Locked
Fig. 19
• As you use the microfiber towel, you will
notice that sometimes a thread will loosen
or pull out. This is normal and you should
NEVER PULL AT THE LOOSE THREAD!
Pulling the thread can cause the weave to
come undone. Instead, simply trim the
thread with a pair of sharp scissors.
Fig. 9
10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Attaching a Towel to the
Triangular Brush
100% white terry cloth towel can be fitted
on this brush, so as to absorb the dirt and
protect delicate surfaces.
Important: Please note that bristles
may break through thin towels. We
recommend that two (2) towels, laid one
on top of the other be used. This will
ensure that the brush bristles do not
break through and that the towels will be
sufficiently absorbent and retain as much
dirt as possible.
Very Important: When installing the
towels to the triangular brush, ensure that
the towels do not cover the front and the
back of the brush. (See Fig. 13)
Filling the Soap Injector
Locking
Button
To use: Connect the tile
squeegee to the hand
grip or use with
Fig. 17
VERY IMPORTANT: Use only
the soap that has been supplied
with your steam cleaner. Use of any
other type of detergent soaps may
damage the pump mechanism and the
feed system of the injector. Regular
detergent soaps SHOULD NEVER BE
USED with this injector.
extension tube for
hard to reach surfaces.
Apply steam abundantly, rub with the
soft spongy edge, then remove excess
water and dirt with the glass wiping
edge.
Pump
Button
Locking
Button
Fig. 18
To Fill Soap Injector:
1. Remove the filler cap from the soap
injector.
IMPORTANT:When cleaning
windows, always avoid any sudden
changes in temperature to prevent glass
breakage or cracks.
Fig. 15
2. Hold the soap
Or
injector in your
Concentrator
hand and place the
Attach the concentrator to the
handgrip or to the extension
tubes. Then attach the detail
brushes To the concentrator.
small funnel into
Note: We recommend using the soap
solution on hard surfaces such as
bathroom tile, bathroom fixtures,
counters. We do NOT recommend
using the soap on carpeting, upholstery
or hardwood floors.
the opening.
(Fig. 15)
1. Prepare white terry cloth
towel:
3. Pour soap into the
soap injector.
Nylon Bristle Brush
Do NOT overfill. Do NOT dilute the
soap solution. Do NOT add water. Do
NOT mix with any other household
cleaner.
size 8” x 17” as
shown in Fig. 10.
It is best for cleaning grout in-between
the tiles, ceramic and marble.
To use: Attach the nylon bristle
brush on to the end of the
concentrator, which then may
be used directly on the hand
grip or with extension tubes
Brass Bristle Brush
Use the brass bristle brush to clean
ovens and hard metal surfaces.
To use: Attach the brass bristle
brush on to the end of the
concentrator, which then may be used
directly on the hand grip or with
extension tubes
WARNING: Do NOT use on
pets, plants or people.
Fig. 10
4. Replace the filler cap onto the soap
injector.
5. Attach the soap injector to the hand
grip. (Fig. 16) Make sure that the
locking button snaps in place.
(Fig. 17)
6. The soap injector may be used with
the concentrator or the soap
accessories. (Fig. 18)
7. To use the soap injector, press on
the pump button for soap to be mixed
with the steam. (Fig. 18)
8. When you have finished using the
soap injector, remove it from the
hose and attach the accessories that
were used to the hose so that you can
remove any excess soap from them or
run them under warm running water to
clean.
IMPORTANT: Always rinse the small
funnel after using it to fill the soap
injector. Never use the small funnel
to fill the steam cleaner boiler.
2. Place the brush on
top of the towel.
3. Fold the towel
as shown in
Using the Soap Injector
We recommend using the soap injector
with the soap accessory adapter or the
concentrator with the bristle brushes. Do
not use the soap injector with the
steam pocket. You can use the
concentrator to apply the soap.
1. Use the steam to moisten and heat
up the stain that you wish to remove.
2. Spray the soap onto the surface with
the stain.
3. Let the soap stay on the stain for 10
to 15 seconds. Then using a brush,
scrubbing pad or sponge, scrub the
stain.
Fig. 11
Fig. 11
4. Place the corner
under the cloth
Wall Paper Scraper
holder. (Fig. 12)
Note: The Wall Paper Scraper
is packaged already attached
to the concentrator.
Fig. 12
To attach the concentrator to
the flexible hose, push it in
until the locking button on the hose clicks
in place with the hole on the concentrator
If the wall paper scraper is not attached to
the concentrator, screw it on to the
concentrator. (Fig. 14)
Note: The wall paper
concentrator
cannot be
used without
5. Fold the other side
of the towel in the
same way and
Fig. 16
4. Then using the steam, scrub the stain
some more and then wipe it clean
with a towel.
5. For stubborn stains, repeat steps
1 to 4 one more time.
place the corner
under the cloth
holder. (Fig. 13)
Fig. 13
Attaching the Accessories to the
Flexible Steam Hose
Dual Edge Glass & Tile Squeegee
This attachment is very useful for
cleaning large windows, plastic material,
ceramic, tiled or marble surfaces.
the wall paper
scraper.
Fig. 14
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|