Escient Stereo Receiver MS616A User Manual

WARNING! Do not expose the apparatus to dripping or splashing. Do not  
Communicates with control devices via Ethernet 10/100 port and ZigBee  
(a wireless standard for mesh-networking).  
5. Static IP Modifications  
place objects filled with liquids near the apparatus.  
AVERTISSEMENT!N'exposez pas l'appareil à l'égoutture ou à  
l'éclaboussement. Ne placez pas les objets remplis de liquides près de  
l'appareil.  
Backlighting feature turns on with any button push or Select Dial push and stays lit  
for a preset time (default is 30 seconds).  
This chapter describes, in general terms, how to set up physical connections  
required for the Switch 16 Channel Audio and all associated devices. Refer to any  
device-specific documentation for additional installation instructions.  
WARNUNG! Setzen Sie den Apparat nicht Bratenfett oder dem Spritzen aus.  
Setzen Sie nicht die Gegenstände, die mit Flüssigkeiten nahe dem Apparat  
gefüllt werden.  
About the Switch 16 Channel Audio  
To set up the logical connections required, refer to Escient Composer Pro User  
Guide software documentation.  
WARNING! To reduce the risk of fire or electrical shock, do not expose this  
apparatus to rain or moisture.  
Front View  
AVERTISSEMENT!Pour réduire le risque du feu ou de choc électrique,  
n'exposez pas cet appareil à la pluie ou à l'humidité.  
WARNUNG!Um das Risiko des Feuers oder des elektrischen Schlages zu  
Connect Input and Output Devices  
verringern, setzen Sie diesen Apparat nicht Regen oder Feuchtigkeit aus.  
MS616A Switch 16 Channel  
Audio  
Installation and Setup Guide  
WARNING! Equipment must be connected to a Mains socket outlet with a  
1. Connect audio source devices (such as CD changers or players, tuners,  
iPods, or tape players) you want included in the system to the audio in jacks.  
2. Connect amplifiers or amplified speakers as needed to the audio out jacks.  
protective earthing connection.  
AVERTISSEMENT!L'équipement doit être relié à une sortie de douille de  
forces à un raccordement de mise à la terre protecteur.  
WARNUNG!Ausrüstung muss an einen Hauptleitungseinfaßungsanschluß  
mit einem schützenden Erdunganschluß angeschlossen werden.  
Connect to the Network and Power  
1. If you are using an Ethernet connection for the Switch 16 Channel Audio, plug  
the data cable from the home network connection into the Switch 16 Channel  
Audio RJ-45 port (labeled Ethernet) and the network port in your wall or at the  
network hub or switch.  
Requirements and Specifications  
Network Requirement: Ethernet or ZigBee 802.15.4 mesh network  
1
2
3
1. Front Display—For displaying or setting audio switch settings and navigating  
Technical Specifications  
system menus  
2. Connect the power cord provided to the back of the Switch 16 Channel Audio  
and to the power outlet. Once the power cord is connected, the Switch 16  
Channel Audio should power up.  
2. Buttons—For choosing options or menus displayed in the front panel user  
Table 1-1. MS616A Technical Specifications  
interface  
3. Select Dial—For scrolling through and selecting screen elements or options  
Inputs  
displayed in the LCD  
# of Channels  
16 L/R Stereo Pairs  
RCA Jacks  
10 kΩ typical  
-14 dBV  
Set Up Logical Connections  
Physical and logical connections are required in order to control, navigate, and  
use the Switch 16 Channel Audio as designed.  
Back View  
Input Connectors  
Input Impedance  
Nominal Input Level  
Maximum Input Level  
Thus far you have set up the physical connections for the Escient Switch 16  
Channel Audio. To complete the logical setup, trained installers must use a PC  
connected (and with Escient Composer software installed) to the home network. If  
you are a trained Escient installer, refer to the Composer Help file.  
Supported Models  
This installation guide covers this Switch 16 Channel Audio model:  
+4 dBV  
• Europe: EFMS616A/N1B  
• UK: EFMS616A/T1B  
Outputs  
Network Configuration  
To set the network configuration:  
# of Channels  
16 L/R Stereo Pairs  
RCA Jacks  
50 Ω typical  
-14 dBV  
Output Connectors  
Output Impedance  
Nominal Output Level  
Maximum Output Level  
What’s in the Box  
The following items are included in your Escient Switch 16 Channel Audio  
2
1
3
4
1. At the In to Out Assignments screen, press the Network button.  
2. On the Network Configuration screen, choose an Ethernet or ZigBee network  
by rotating and pressing the Select Dial.  
1. Power Plug Port—For standard IEC cord (included). Supports universal AC  
input (100-240 VAC 50/60 Hz).  
2. Ethernet—RJ-45 for a 10/100 Mb Ethernet connection  
3. Audio In (Left-Right pairs) 1-16—RCA jacks for stereo channel input for up  
to 16 stereo analog sources  
Escient Matrix Switch 16 Channel Audio (MS616A)  
IEC power cord  
This manual  
IMPORTANT! When making logical connections in Composer,  
identify the device as the network type (Ethernet or Zigbee) that you  
choose on the device network configuration. To avoid unexpected  
behavior, do not identify the device as both network types.  
+4 dBV  
4. Audio Out (Left-Right pairs) 1-16—RCA jacks for stereo channel line output  
for up to 16 amplifiers  
Zone (Output) Control:  
Available Gain  
Treble  
Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufac-  
turer’s instructions.  
Mute (-75 dB) to -40 to +8 dB  
-12 to +12 dB, 2 dB steps, High Shelving EQ  
-12 to +12 dB, 2 dB steps, Low Shelving EQ  
L / R  
IMPORTANT! En établissant les rapports logiques dans le  
compositeur, identifiez le dispositif comme type de réseau (Ethernet  
ou Zigbee) ce vous choisissent sur la configuration réseau de  
dispositif. Pour éviter le comportement inattendu, n'identifiez pas le  
dispositif en tant que les deux types de réseau.  
Source Inputs  
Each of the 16 signal sensing analog audio inputs (the RCA style ports) is labeled  
1-16 for each individual source.  
Bass  
Balance  
WICHTIG! Wenn Sie logische Beziehungen im Komponisten  
herstellen, identifizierenen Sie die Vorrichtung als die Netzart  
(Ethernet oder Zigbee) diese Sie wählen auf der  
VorrichtungsNetzwerkkonfiguration. Um unerwartetes Verhalten zu  
vermeiden, identifizierenen Sie die Vorrichtung nicht als beide  
Netzarten.  
Audio Outputs  
The system automatically creates generic source names displayed in the front of  
the device. To change these names, you must update your system using  
supported system designing software (such as Composer Pro on a PC). For more  
information, refer to the documentation that shipped with your Escient controller or  
contact your professional installer or reseller.  
Input Power Requirement:  
8. Do not install near any heat sources such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding-type  
plug has two blades and a third grounding prong. The wide blade or the third  
prong is provided for your safety. If the provided plug does not fit into your out-  
let, consult an electrician for replacement of the obsolete outlet.  
10.Protect the power cord from being walked on or pinched, particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11.Only use attachments/accessories specified by the manufacturer.  
12.Use only with the cart, stand, tripod, bracket, or table specified by the manu-  
facturer, or sold with the apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury from tip-over.  
13.Unplug this apparatus during lighting storms or when unused for long periods  
of time.  
Voltage  
Frequency  
Amps  
100-240V~  
50/60 Hz  
3. If the switch is set to use a ZigBee network, the EUID, Gateway, and ZigBee  
channel number are displayed. This screen has two menu options:  
0.12/0.06 Amps  
14.4 Watts  
Front Display  
Identify: When identifying the switch in Composer, press this button.  
Back: Returns to the Network Configuration screen.  
Watts  
The best method of initially setting up system routing for the Switch 16 Channel  
Audio is using Composer Pro software on a PC (for trained installers only). You  
can also make adjustments from the front display.  
4. If the switch is set to use an Ethernet network, the MAC address, method of  
obtaining a network IP address, the device’s IP address, Subnet Mask, and  
Gateway are displayed.  
Additional Resources  
The following resources are available:  
The front display allows you to set or change audio source routing and change  
zone settings for volume, bass, treble, and mute. The display also shows the  
current source and zone activity.  
The Switch 16 Channel Audio, by default, uses DHCP to obtain a network  
IP address.  
Your Escient-authorized reseller  
Set Up the Switch 16 Channel Audio  
This device operates as part of the Escient home system, which requires physical  
and logical connections to function as designed.  
14.Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as when a power-supply  
cord or plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not oper-  
ate normally, or has been dropped.  
Features and Benefits  
Switches up to 16 input sources to up to 16 simultaneous output zones.  
Adjustable gain, treble, bass, and balance for each zone  
Audio sensing on inputs  
Device chassis is three standard rack units (RU) tall and rack mountable con-  
forming to EIA 19” rack standards (13.3 cm x 44 cm x 35.6 cm)  
Essential setup tasks include:  
If the local area network does not support DHCP, you can configure the  
switch to use a Static IP address instead:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     

CNet Technology Network Router CWR 800 User Manual
Compaq Network Router mar345 User Manual
Creative Modem DI5732 User Manual
Cypress Clock CY24271 User Manual
Desa Water Heater PROPANE GAS LOG HEATER User Manual
Dixon Lawn Mower ZTR 2300 User Manual
D Link Network Router WBR 1310 User Manual
Dukane Projector 8784 User Manual
Duracell Battery Charger 2 3A User Manual
Earthquake Sound Speaker Kompressor User Manual