TECHNICAL SPECIFICATIONS MX8750
SPECIFICATIONS
DESCRIPTION
Input Type Two (2): Active balanced
Input Impedance 18k Ohms
Max. Input Level +20dBu
Output Type Eight (8): Active balanced
Output Impedance 112 Ohms
Max. Output Level +20 dBu
The MX8750 Digital Electronic Processor is designed to optimize
the performance of a wide range of EAW loudspeakers. It is a cost
effective, single-rack space, processor with fully controllable
confiuration and signal processing functions. It is designed for use
in single or two channel modes with bi-amplified and tri-amplified
loudspeakers along with subwoofers. The MX8750 has two input
channels each with eight outputs that can be configured in any
combination of input to output. Its functions include crossover
filters, parametric equalization, shelving EQ, HP and LP filters, de-
lay, polarity and limiting. The range and quantity of processing
finctions assures being able to achieve optimum system perfor-
mance. The MX8750 is controlled by using EAW software and a
Windows PC with an RS-232 or midi interface. There is a full comple-
ment of level and status indicatores plus individual output mutes
for setting-up and troubleshooting systems.
Frequency Response
.25dB, 20Hz-20kHz
Total Harmonic Distortion <.01% @ 1kHz, +20dBu
Dynamic Range .110dB, 2-20kHz, unweighted
Output Noise <-90dBu, unweighted
EQ Filters
EQ Filter Type Parametric Bell and Shelving (6dB/
oct. & 12dB/oct.)
EQ Filter Number 6 per input, 5 per output
Q
.25 to 64
EQ Frequency Resolution 1/24 octave
Level Range +15/-30dB, 0.1dB increments
Crossover Filters
Crossover Filter Type Butterworth, Bessell,Linkwitz-Riley
FEATURES
- Fully controllable configurations and signal processing func-
tions
- Digital processing for precise settings
- 6 bands of parametrice EQ on each input, 5 on each output
and 7 crossover types ensure optimum performance
- Each EQ band is selectable between full parametric or first and
second order hi/lo shelving filters
Slope 12dB/oct., 18dB/oct., 24dB/oct.
Number 2 per output
Frequency Resolution 1/24 octave
Level Range +12dB/-infinite, 0.1dB increments
Limiter
- Active balanced input and outputs with XLR connectors
Limiter Threshold -20dBu to +20 dBu, 1db increments
Limiter Ratio 1.2;1, 1.5;1, 2;1, 3;1, 4:1, 6;1, 10:1,
20;1, inf:1
Limiter Attack 1 ms/dB, 100 ms/dB, 500 ms/dB
Limiter Release 20 ms/dB, 100 ms/dB. 500 ms/dB
CLOSE COUPLED ELECTRONIC PROCESSINGTM
The concept of Closed Coupled Electronic ProcessingTM (CCEPTM) is
central to the EAW design process. EAW engineers integrate elec-
tronic signal processing into the total loudspeaker system but we
recognize that electronics can only improve performance after all
other electro-mechanical factors have been optimized. The MX8750
processor is capable of providing complex asymetrical crossovers,
delay compensation, parametric equalization, LPF ands HPF filter-
ing, shelving EQ and limiting. While all parameters are fully ad-
justable, the MX8750 can be configured using factory-determined
settings for a particular loudspeaker system.
Delay
Input Delay 300 msec max., 1 msec increments
Output Delay 20 msec max., 20 us increments
Digital Processing
A/D converters 24 Bit, 128x oversampling
D/A Converters 24 bit, 128x oversampling
Sample rate 48kHz
DSP Processing 24 Bit, 56 Bit Accumulator, 200
MIPs
CONFIGURATIONS
Propagation Delay 1.46 msec
The MX8750 processor is field configured (Close CoupledTM) for a
particular EAW loudspeaker system. If you have any questions please
contact an authorized EAW sales agent or the factory to be certain
that you have correctly configured the processor to your system.
EASTERN ACOUSTIC WORKS
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# 888xxx(A) MX8750/2 PP Feb2001 • Printed In USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|